/* Copyright (c) 1990-2007 Info-ZIP. All rights reserved. See the accompanying file LICENSE, version 2000-Apr-09 or later (the contents of which are also included in zip.h) for terms of use. If, for some reason, all these files are missing, the Info-ZIP license also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html */ /* * crc_i386.S, optimized CRC calculation function for Zip and UnZip, * created by Paul Kienitz and Christian Spieler. Last revised 07 Jan 2007. * * GRR 961110: incorporated Scott Field optimizations from win32/crc_i386.asm * => overall 6% speedup in "unzip -tq" on 9MB zipfile (486-66) * * SPC 970402: revised for Rodney Brown's optimizations (32-bit-wide * aligned reads for most of the data from buffer), can be * disabled by defining the macro NO_32_BIT_LOADS * * SPC 971012: added Rodney Brown's additional tweaks for 32-bit-optimized * CPUs (like the Pentium Pro, Pentium II, and probably some * Pentium clones). This optimization is controlled by the * preprocessor switch "__686" and is disabled by default. * (This default is based on the assumption that most users * do not yet work on a Pentium Pro or Pentium II machine ...) * * COS 050116: Enabled the 686 build by default, because there are hardly any * pre-686 CPUs in serious use nowadays. (See SPC 970402 above.) * * SPC 060103: Updated code to incorporate newer optimizations found in zlib. * * SPC 070107: Added conditional switch to deactivate crc32() compilation. * * FLAT memory model assumed. Calling interface: * - args are pushed onto the stack from right to left, * - return value is given in the EAX register, * - all other registers (with exception of EFLAGS) are preserved. (With * GNU C 2.7.x, %edx and %ecx are `scratch' registers, but preserving * them nevertheless adds only 4 single byte instructions.) * * This source generates the function * ulg crc32(ulg crc, ZCONST uch *buf, extent len). * * Loop unrolling can be disabled by defining the macro NO_UNROLLED_LOOPS. * This results in shorter code at the expense of reduced performance. */ /* This file is NOT used in conjunction with zlib, or when only creation of * the basic CRC_32_Table (for other purpose) is requested. */ #if !defined(USE_ZLIB) && !defined(CRC_TABLE_ONLY) /* Preprocess with -DNO_UNDERLINE if your C compiler does not prefix * external symbols with an underline character '_'. */ #if defined(NO_UNDERLINE) || defined(__ELF__) # define _crc32 crc32 # define _get_crc_table get_crc_table #endif /* Use 16-byte alignment if your assembler supports it. Warning: gas * uses a log(x) parameter (.align 4 means 16-byte alignment). On SVR4 * the parameter is a number of bytes. */ #ifndef ALIGNMENT # define ALIGNMENT .align 4,0x90 #endif #if defined(i386) || defined(_i386) || defined(_I386) || defined(__i386) /* This version is for 386 Unix, OS/2, MSDOS in 32 bit mode (gcc & gas). * Warning: it uses the AT&T syntax: mov source,dest * This file is only optional. If you want to use the C version, * remove -DASM_CRC from CFLAGS in Makefile and set OBJA to an empty string. */ .file "crc_i386.S" #if !defined(PRE_686) && !defined(__686) /* Optimize for Pentium Pro and compatible CPUs by default. */ # define __686 #endif #if defined(NO_STD_STACKFRAME) && defined(USE_STD_STACKFRAME) # undef USE_STACKFRAME #else /* The default is to use standard stack frame entry, because it * results in smaller code! */ # ifndef USE_STD_STACKFRAME # define USE_STD_STACKFRAME # endif #endif #ifdef USE_STD_STACKFRAME # define _STD_ENTRY pushl %ebp ; movl %esp,%ebp # define arg1 8(%ebp) # define arg2 12(%ebp) # define arg3 16(%ebp) # define _STD_LEAVE popl %ebp #else /* !USE_STD_STACKFRAME */ # define _STD_ENTRY # define arg1 24(%esp) # define arg2 28(%esp) # define arg3 32(%esp) # define _STD_LEAVE #endif /* ?USE_STD_STACKFRAME */ /* * These two (three) macros make up the loop body of the CRC32 cruncher. * registers modified: * eax : crc value "c" * esi : pointer to next data byte (or lword) "buf++" * registers read: * edi : pointer to base of crc_table array * scratch registers: * ebx : index into crc_table array * (requires upper three bytes = 0 when __686 is undefined) */ #ifndef __686 /* optimize for 386, 486, Pentium */ #define Do_CRC /* c = (c >> 8) ^ table[c & 0xFF] */\ movb %al, %bl ;/* tmp = c & 0xFF */\ shrl $8, %eax ;/* c = (c >> 8) */\ xorl (%edi, %ebx, 4), %eax ;/* c ^= table[tmp] */ #else /* __686 : optimize for Pentium Pro and compatible CPUs */ #define Do_CRC /* c = (c >> 8) ^ table[c & 0xFF] */\ movzbl %al, %ebx ;/* tmp = c & 0xFF */\ shrl $8, %eax ;/* c = (c >> 8) */\ xorl (%edi, %ebx, 4), %eax ;/* c ^=table[tmp] */ #endif /* ?__686 */ #define Do_CRC_byte /* c = (c >> 8) ^ table[(c^*buf++)&0xFF] */\ xorb (%esi), %al ;/* c ^= *buf */\ incl %esi ;/* buf++ */\ Do_CRC #define Do_CRC_byteof(ofs) /* c = (c >> 8) ^ table[(c^*buf++)&0xFF] */\ xorb ofs(%esi), %al ;/* c ^= *buf */\ incl %esi ;/* buf++ */\ Do_CRC #ifndef NO_32_BIT_LOADS # ifdef IZ_CRCOPTIM_UNFOLDTBL /* the edx register is needed in crc calculation */ # define SavLen arg3 # define UpdCRC_lword \ movzbl %al, %ebx ; \ movl 3072(%edi,%ebx,4), %edx ; \ movzbl %ah, %ebx ; \ shrl $16, %eax ; \ xor 2048(%edi,%ebx,4), %edx ; \ movzbl %al, %ebx ; \ shrl $8,%eax ; \ xorl 1024(%edi,%ebx,4), %edx ; \ movl (%edi,%eax,4), %eax ; \ xorl %edx,%eax ; # define UpdCRC_lword_sh(dwPtrIncr) \ movzbl %al, %ebx ; \ movl 3072(%edi,%ebx,4), %edx ; \ movzbl %ah, %ebx ; \ shrl $16, %eax ; \ xor 2048(%edi,%ebx,4), %edx ; \ movzbl %al, %ebx ; \ addl $4*(dwPtrIncr), %esi ;/* ((ulg *)buf)+=dwPtrIncr */\ shrl $8,%eax ; \ xorl 1024(%edi,%ebx,4), %edx ; \ movl (%edi,%eax,4),%eax ; \ xorl %edx,%eax ; # else /* !IZ_CRCOPTIM_UNFOLDTBL */ /* the edx register is not needed anywhere else */ # define SavLen %edx # define UpdCRC_lword \ Do_CRC \ Do_CRC \ Do_CRC \ Do_CRC # define UpdCRC_lword_sh(dwPtrIncr) \ Do_CRC \ Do_CRC \ addl $4*(dwPtrIncr), %esi ;/* ((ulg *)buf)++ */\ Do_CRC \ Do_CRC # endif /* ?IZ_CRCOPTIM_UNFOLDTBL */ #define Do_CRC_lword \ xorl (%esi), %eax ;/* c ^= *(ulg *)buf */\ UpdCRC_lword_sh(1) /* ... ((ulg *)buf)++ */ #define Do_CRC_4lword \ xorl (%esi), %eax ;/* c ^= *(ulg *)buf */\ UpdCRC_lword \ xorl 4(%esi), %eax ;/* c ^= *((ulg *)buf+1) */\ UpdCRC_lword \ xorl 8(%esi), %eax ;/* c ^= *((ulg *)buf+2) */\ UpdCRC_lword \ xorl 12(%esi), %eax ;/* c ^= *((ulg *)buf]+3 */\ UpdCRC_lword_sh(4) /* ... ((ulg *)buf)+=4 */ #endif /* !NO_32_BIT_LOADS */ .text .globl _crc32 _crc32: /* ulg crc32(ulg crc, uch *buf, extent len) */ _STD_ENTRY pushl %edi pushl %esi pushl %ebx pushl %edx pushl %ecx movl arg2, %esi /* 2nd arg: uch *buf */ subl %eax, %eax /* > if (!buf) */ testl %esi, %esi /* > return 0; */ jz .L_fine /* > else { */ call _get_crc_table movl %eax, %edi movl arg1, %eax /* 1st arg: ulg crc */ #ifndef __686 subl %ebx, %ebx /* ebx=0; bl usable as dword */ #endif movl arg3, %ecx /* 3rd arg: extent len */ notl %eax /* > c = ~crc; */ testl %ecx, %ecx #ifndef NO_UNROLLED_LOOPS jz .L_bail # ifndef NO_32_BIT_LOADS /* Assert now have positive length */ .L_align_loop: testl $3, %esi /* Align buf on lword boundary */ jz .L_aligned_now Do_CRC_byte decl %ecx jnz .L_align_loop .L_aligned_now: # endif /* !NO_32_BIT_LOADS */ movl %ecx, SavLen /* save current value of len */ shrl $4, %ecx /* ecx = len / 16 */ jz .L_No_Sixteens /* align loop head at start of 486 internal cache line !! */ ALIGNMENT .L_Next_Sixteen: # ifndef NO_32_BIT_LOADS Do_CRC_4lword # else /* NO_32_BIT_LOADS */ Do_CRC_byteof(0) Do_CRC_byteof(1) Do_CRC_byteof(2) Do_CRC_byteof(3) Do_CRC_byteof(4) Do_CRC_byteof(5) Do_CRC_byteof(6) Do_CRC_byteof(7) Do_CRC_byteof(8) Do_CRC_byteof(9) Do_CRC_byteof(10) Do_CRC_byteof(11) Do_CRC_byteof(12) Do_CRC_byteof(13) Do_CRC_byteof(14) Do_CRC_byteof(15) addl $16,%esi ;/* buf += 16 */ # endif /* ?NO_32_BIT_LOADS */ decl %ecx jnz .L_Next_Sixteen .L_No_Sixteens: movl SavLen, %ecx andl $15, %ecx /* ecx = len % 16 */ # ifndef NO_32_BIT_LOADS shrl $2,%ecx /* ecx = len / 4 */ jz .L_No_Fours .L_Next_Four: Do_CRC_lword decl %ecx jnz .L_Next_Four .L_No_Fours: movl SavLen,%ecx andl $3,%ecx /* ecx = len % 4 */ # endif /* !NO_32_BIT_LOADS */ #endif /* !NO_UNROLLED_LOOPS */ jz .L_bail /* > if (len) */ /* align loop head at start of 486 internal cache line !! */ ALIGNMENT .L_loupe: /* > do { */ Do_CRC_byte /* c = CRC32(c,*buf++,crctab);*/ decl %ecx /* > } while (--len); */ jnz .L_loupe .L_bail: /* > } */ notl %eax /* > return ~c; */ .L_fine: popl %ecx popl %edx popl %ebx popl %esi popl %edi _STD_LEAVE ret #else error: this asm version is for 386 only #endif /* i386 || _i386 || _I386 || __i386 */ #endif /* !USE_ZLIB && !CRC_TABLE_ONLY */ .section .note.GNU-stack, "", @progbits .previous