# Makefile.in generated by automake 1.15.1 from Makefile.am.
# Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
#
# Copyright (C) 2012-2024 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3. If not see
# .
#
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/bfd
pkgincludedir = $(includedir)/bfd
pkglibdir = $(libdir)/bfd
pkglibexecdir = $(libexecdir)/bfd
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = x86_64-pc-linux-gnu
target_triplet = mips-openwrt-linux-musl
am__append_1 = -rpath $(rpath_bfdlibdir)
am__append_2 = $(INCDIR)/plugin-api.h
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/bfd64.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/gettext-sister.m4 \
$(top_srcdir)/../config/gettext.m4 \
$(top_srcdir)/../config/iconv.m4 \
$(top_srcdir)/../config/intlmacosx.m4 \
$(top_srcdir)/../config/jobserver.m4 \
$(top_srcdir)/../config/largefile.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/lib-ld.m4 \
$(top_srcdir)/../config/lib-link.m4 \
$(top_srcdir)/../config/lib-prefix.m4 \
$(top_srcdir)/../config/nls.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../config/pkg.m4 \
$(top_srcdir)/../config/plugins.m4 \
$(top_srcdir)/../config/po.m4 \
$(top_srcdir)/../config/progtest.m4 \
$(top_srcdir)/../config/zlib.m4 \
$(top_srcdir)/../config/zstd.m4 $(top_srcdir)/../libtool.m4 \
$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
$(top_srcdir)/ax_tls.m4 $(top_srcdir)/bfd.m4 \
$(top_srcdir)/warning.m4 $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/version.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__bfdinclude_HEADERS_DIST)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = bfd-in3.h po/Makefile.in
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(bfdlibdir)" "$(DESTDIR)$(infodir)" \
"$(DESTDIR)$(bfdincludedir)"
LTLIBRARIES = $(bfdlib_LTLIBRARIES) $(noinst_LTLIBRARIES)
am__DEPENDENCIES_1 =
am__objects_1 = archive.lo archures.lo bfd.lo bfdio.lo bfdwin.lo \
cache.lo coff-bfd.lo compress.lo corefile.lo elf-properties.lo \
format.lo hash.lo libbfd.lo linker.lo merge.lo opncls.lo \
reloc.lo section.lo simple.lo stab-syms.lo stabs.lo syms.lo \
targets.lo binary.lo ihex.lo srec.lo tekhex.lo verilog.lo
am_libbfd_la_OBJECTS = $(am__objects_1)
libbfd_la_OBJECTS = $(am_libbfd_la_OBJECTS)
AM_V_lt = $(am__v_lt_$(V))
am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
am__v_lt_0 = --silent
am__v_lt_1 =
libbfd_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(libbfd_la_LDFLAGS) $(LDFLAGS) -o $@
am_libbfd_la_rpath =
#am_libbfd_la_rpath = -rpath $(bfdlibdir)
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_$(V))
am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_$(V))
am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(libbfd_la_SOURCES) $(EXTRA_libbfd_la_SOURCES)
AM_V_DVIPS = $(am__v_DVIPS_$(V))
am__v_DVIPS_ = $(am__v_DVIPS_$(AM_DEFAULT_VERBOSITY))
am__v_DVIPS_0 = @echo " DVIPS " $@;
am__v_DVIPS_1 =
AM_V_MAKEINFO = $(am__v_MAKEINFO_$(V))
am__v_MAKEINFO_ = $(am__v_MAKEINFO_$(AM_DEFAULT_VERBOSITY))
am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
am__v_MAKEINFO_1 =
AM_V_INFOHTML = $(am__v_INFOHTML_$(V))
am__v_INFOHTML_ = $(am__v_INFOHTML_$(AM_DEFAULT_VERBOSITY))
am__v_INFOHTML_0 = @echo " INFOHTML" $@;
am__v_INFOHTML_1 =
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_$(V))
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_$(AM_DEFAULT_VERBOSITY))
am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
am__v_TEXI2DVI_1 =
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_$(V))
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_$(AM_DEFAULT_VERBOSITY))
am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
am__v_TEXI2PDF_1 =
AM_V_texinfo = $(am__v_texinfo_$(V))
am__v_texinfo_ = $(am__v_texinfo_$(AM_DEFAULT_VERBOSITY))
am__v_texinfo_0 = -q
am__v_texinfo_1 =
AM_V_texidevnull = $(am__v_texidevnull_$(V))
am__v_texidevnull_ = $(am__v_texidevnull_$(AM_DEFAULT_VERBOSITY))
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 =
am__dirstamp = $(am__leading_dot)dirstamp
INFO_DEPS = doc/bfd.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = doc/bfd.dvi
PDFS = doc/bfd.pdf
PSS = doc/bfd.ps
HTMLS = doc/bfd.html
TEXINFOS = doc/bfd.texi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__bfdinclude_HEADERS_DIST = $(INCDIR)/plugin-api.h bfd.h \
$(INCDIR)/ansidecl.h $(INCDIR)/symcat.h \
$(INCDIR)/diagnostics.h $(INCDIR)/bfdlink.h
HEADERS = $(bfdinclude_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = ${SHELL} /home/user/openwrt2305/build_dir/toolchain-mips_24kc_gcc-13.3.0_musl/binutils-2.42/missing aclocal-1.15
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 0
AR = ar
AUTOCONF = ${SHELL} /home/user/openwrt2305/build_dir/toolchain-mips_24kc_gcc-13.3.0_musl/binutils-2.42/missing autoconf
AUTOHEADER = ${SHELL} /home/user/openwrt2305/build_dir/toolchain-mips_24kc_gcc-13.3.0_musl/binutils-2.42/missing autoheader
AUTOMAKE = ${SHELL} /home/user/openwrt2305/build_dir/toolchain-mips_24kc_gcc-13.3.0_musl/binutils-2.42/missing automake-1.15
AWK = gawk
CATALOGS =
CATOBJEXT =
CC = /home/user/openwrt2305/staging_dir/host/bin/gcc
CCDEPMODE = depmode=gcc3
CC_FOR_BUILD = /home/user/openwrt2305/staging_dir/host/bin/gcc
CFLAGS = -O2 -I/home/user/openwrt2305/staging_dir/host/include
COREFILE =
COREFLAG =
CPP = /home/user/openwrt2305/staging_dir/host/bin/gcc -E
CPPFLAGS =
CYGPATH_W = echo
DATADIRNAME =
DEBUGDIR = ${exec_prefix}/lib/debug
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DSYMUTIL = dsymutil
DUMPBIN =
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /home/user/openwrt2305/staging_dir/host/bin/grep -E
EXEEXT =
EXEEXT_FOR_BUILD = $(EXEEXT)
FGREP = /home/user/openwrt2305/staging_dir/host/bin/grep -F
GENCAT =
GMSGFMT = /usr/bin/msgfmt
GREP = /home/user/openwrt2305/staging_dir/host/bin/grep
HDEFINES =
INCINTL =
INSTALL = /home/user/openwrt2305/staging_dir/host/bin/install -c
INSTALL_DATA = /home/user/openwrt2305/staging_dir/host/bin/install -c -m 644
INSTALL_PROGRAM = /home/user/openwrt2305/staging_dir/host/bin/install -c
INSTALL_SCRIPT = /home/user/openwrt2305/staging_dir/host/bin/install -c
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INSTOBJEXT =
INTLLIBS =
INTL_MACOSX_LIBS =
LARGEFILE_CPPFLAGS =
LD = ld -m elf_x86_64
LDFLAGS = -L/home/user/openwrt2305/staging_dir/host/lib
LIBICONV = -liconv
LIBINTL =
LIBINTL_DEP =
LIBM = -lm
LIBOBJS =
LIBS = -ldl
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO =
LN_S = ln -s
LTLIBICONV = -liconv
LTLIBINTL =
LTLIBOBJS =
MAINT = #
MAKEINFO = /home/user/openwrt2305/build_dir/toolchain-mips_24kc_gcc-13.3.0_musl/binutils-2.42/missing makeinfo --split-size=5000000
MKDIR_P = /bin/mkdir -p
MKINSTALLDIRS = $(top_builddir)/./../mkinstalldirs
MSGFMT = /usr/bin/msgfmt
MSGMERGE = /usr/bin/msgmerge
NM = /usr/bin/nm -B
NMEDIT =
NO_WERROR =
OBJDUMP = objdump
OBJEXT = o
OTOOL = otool
OTOOL64 =
PACKAGE = bfd
PACKAGE_BUGREPORT =
PACKAGE_NAME = bfd
PACKAGE_STRING = bfd 2.42
PACKAGE_TARNAME = bfd
PACKAGE_URL =
PACKAGE_VERSION = 2.42
PATH_SEPARATOR = :
PKGVERSION = (GNU Binutils)
PKG_CONFIG = /home/user/openwrt2305/staging_dir/host/bin/pkg-config
PKG_CONFIG_LIBDIR = /home/user/openwrt2305/staging_dir/toolchain-mips_24kc_gcc-13.3.0_musl/lib/pkgconfig
PKG_CONFIG_PATH = /home/user/openwrt2305/staging_dir/host/lib/pkgconfig:/home/user/openwrt2305/staging_dir/toolchain-mips_24kc_gcc-13.3.0_musl/lib/pkgconfig
POSUB =
RANLIB = ranlib --plugin /usr/lib/gcc/x86_64-linux-gnu/8/liblto_plugin.so
REPORT_BUGS_TEXI = @uref{https://sourceware.org/bugzilla/}
REPORT_BUGS_TO =
SED = /home/user/openwrt2305/staging_dir/host/bin/sed
SET_MAKE =
SHARED_LDFLAGS =
SHARED_LIBADD =
SHELL = /usr/bin/env bash
STRIP = strip
TDEFINES =
USE_NLS = no
VERSION = 2.42
WARN_CFLAGS = -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144
WARN_CFLAGS_FOR_BUILD = -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144
WARN_WRITE_STRINGS = -Wwrite-strings
XGETTEXT = /usr/bin/xgettext
ZSTD_CFLAGS = -I/home/user/openwrt2305/staging_dir/toolchain-mips_24kc_gcc-13.3.0_musl/include -pthread
ZSTD_LIBS = -L/home/user/openwrt2305/staging_dir/toolchain-mips_24kc_gcc-13.3.0_musl/lib -lzstd -pthread
abs_builddir = /home/user/openwrt2305/build_dir/toolchain-mips_24kc_gcc-13.3.0_musl/binutils-2.42/bfd
abs_srcdir = /home/user/openwrt2305/build_dir/toolchain-mips_24kc_gcc-13.3.0_musl/binutils-2.42/bfd
abs_top_builddir = /home/user/openwrt2305/build_dir/toolchain-mips_24kc_gcc-13.3.0_musl/binutils-2.42/bfd
abs_top_srcdir = /home/user/openwrt2305/build_dir/toolchain-mips_24kc_gcc-13.3.0_musl/binutils-2.42/bfd
ac_ct_CC =
ac_ct_DUMPBIN =
all_backends = $(BFD64_BACKENDS) $(BFD32_BACKENDS)
am__include = include
am__leading_dot = .
am__quote =
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bfd64_libs = $(BFD64_LIBS)
bfd_backends = elf32-mips.lo elfxx-mips.lo elf-vxworks.lo elf32.lo elf.lo elflink.lo elf-attrs.lo elf-strtab.lo elf-eh-frame.lo elf-sframe.lo dwarf1.lo dwarf2.lo ecofflink.lo coffgen.lo coff-mips.lo ecoff.lo elfn32-mips.lo elf64-mips.lo elf64.lo elf64-gen.lo elf32-gen.lo plugin.lo
bfd_default_target_size = 32
bfd_file_ptr = int64_t
bfd_machines = cpu-mips.lo
bfd_ufile_ptr = uint64_t
bfdincludedir =
#bfdincludedir = $(exec_prefix)/$(host_noncanonical)/$(target_noncanonical)/include
# Empty these so that the respective installation directories will not be created.
bfdlibdir =
#bfdlibdir = $(exec_prefix)/$(host_noncanonical)/$(target_noncanonical)/lib
bindir = ${exec_prefix}/bin
build = x86_64-pc-linux-gnu
build_alias = x86_64-pc-linux-gnu
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
havevecs = -DHAVE_mips_elf32_trad_be_vec -DHAVE_mips_elf32_trad_le_vec -DHAVE_mips_ecoff_be_vec -DHAVE_mips_ecoff_le_vec -DHAVE_mips_elf32_ntrad_be_vec -DHAVE_mips_elf64_trad_be_vec -DHAVE_mips_elf32_ntrad_le_vec -DHAVE_mips_elf64_trad_le_vec -DHAVE_elf64_le_vec -DHAVE_elf64_be_vec -DHAVE_elf32_le_vec -DHAVE_elf32_be_vec
host = x86_64-pc-linux-gnu
host_alias = x86_64-pc-linux-gnu
host_cpu = x86_64
host_noncanonical = x86_64-pc-linux-gnu
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/user/openwrt2305/build_dir/toolchain-mips_24kc_gcc-13.3.0_musl/binutils-2.42/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lt_cv_dlopen_libs = -ldl
mandir = ${datarootdir}/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /home/user/openwrt2305/staging_dir/toolchain-mips_24kc_gcc-13.3.0_musl
program_transform_name = s&^&mips-openwrt-linux-musl-&
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
supports_plugins = 1
sysconfdir = ${prefix}/etc
target = mips-openwrt-linux-musl
target_alias = mips-openwrt-linux-musl
target_cpu = mips
target_noncanonical = mips-openwrt-linux-musl
target_os = linux-musl
target_vendor = openwrt
tdefaults = -DDEFAULT_VECTOR=mips_elf32_trad_be_vec -DSELECT_VECS='&mips_elf32_trad_be_vec,&mips_elf32_trad_le_vec,&mips_ecoff_be_vec,&mips_ecoff_le_vec,&mips_elf32_ntrad_be_vec,&mips_elf64_trad_be_vec,&mips_elf32_ntrad_le_vec,&mips_elf64_trad_le_vec,&elf64_le_vec,&elf64_be_vec,&elf32_le_vec,&elf32_be_vec' -DSELECT_ARCHITECTURES='&bfd_mips_arch'
top_build_prefix =
top_builddir = .
top_srcdir = .
wordsize = 64
zlibdir =
zlibinc =
AUTOMAKE_OPTIONS = no-dist foreign info-in-builddir no-texinfo.tex
ACLOCAL_AMFLAGS = -I . -I .. -I ../config
MOSTLYCLEANFILES = ofiles stamp-ofiles $(MKDOC) doc/*.o doc/*.stamp
CLEANFILES = bfd.h dep.sed stmp-bfd-h DEP DEPA DEP1 DEP2 stmp-bin2-h \
stmp-lbfd-h stmp-lcoff-h
DISTCLEANFILES = $(BUILD_CFILES) $(BUILD_HFILES) libtool-soversion \
doc/bfd.?? doc/bfd.??? texput.log
MAINTAINERCLEANFILES = $(DOCFILES) doc/bfd.info
INCDIR = $(srcdir)/../include
CSEARCH = -I. -I$(srcdir) -I$(INCDIR)
SUBDIRS = po
bfddocdir = doc
libbfd_la_LDFLAGS = $(am__append_1) -release `cat libtool-soversion` \
$(am__empty)
#bfdlib_LTLIBRARIES = libbfd.la
bfdinclude_HEADERS = $(am__append_2)
#bfdinclude_HEADERS = $(BFD_H) \
# $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h \
# $(INCDIR)/diagnostics.h \
# $(INCDIR)/bfdlink.h $(am__append_2)
rpath_bfdlibdir = $(exec_prefix)/$(host_noncanonical)/$(target_noncanonical)/lib
noinst_LTLIBRARIES = libbfd.la
# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
# -I../zlib, unless we were configured with --with-system-zlib, in which
# case both are empty.
ZLIB = -lz
ZLIBINC =
AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC) $(ZSTD_CFLAGS)
AM_CPPFLAGS = -DBINDIR='"$(bindir)"' -DLIBDIR='"$(libdir)"' \
\
$(CSEARCH) $(CSWITCHES) $(HAVEVECS)
LIBDL = -ldl
# bfd.h goes here, for now
BFD_H = bfd.h
# Jim Kingdon notes:
# Writing S-records should be included in all (or at least most)
# *-*-coff, *-*-aout, etc., configurations, because people will want to
# be able to use objcopy to create S-records. (S-records are not useful
# for the debugger, so if you are downloading things as S-records you
# need two copies of the executable, one to download and one for the
# debugger).
BFD32_LIBS = \
archive.lo archures.lo bfd.lo bfdio.lo bfdwin.lo cache.lo \
coff-bfd.lo compress.lo corefile.lo elf-properties.lo format.lo \
hash.lo libbfd.lo linker.lo merge.lo opncls.lo reloc.lo \
section.lo simple.lo stab-syms.lo stabs.lo syms.lo targets.lo \
binary.lo ihex.lo srec.lo tekhex.lo verilog.lo
BFD64_LIBS = archive64.lo
BFD32_LIBS_CFILES = \
archive.c archures.c bfd.c bfdio.c bfdwin.c cache.c coff-bfd.c \
compress.c corefile.c elf-properties.c format.c hash.c \
libbfd.c linker.c merge.c opncls.c reloc.c \
section.c simple.c stab-syms.c stabs.c syms.c targets.c \
binary.c ihex.c srec.c tekhex.c verilog.c
BFD64_LIBS_CFILES = archive64.c
# This list is alphabetized to make it easier to keep in sync
# with the decls and initializer in archures.c.
ALL_MACHINES = \
cpu-aarch64.lo \
cpu-alpha.lo \
cpu-amdgcn.lo \
cpu-arc.lo \
cpu-arm.lo \
cpu-avr.lo \
cpu-bfin.lo \
cpu-bpf.lo \
cpu-cr16.lo \
cpu-cris.lo \
cpu-crx.lo \
cpu-csky.lo \
cpu-d10v.lo \
cpu-d30v.lo \
cpu-dlx.lo \
cpu-epiphany.lo \
cpu-fr30.lo \
cpu-frv.lo \
cpu-ft32.lo \
cpu-h8300.lo \
cpu-hppa.lo \
cpu-i386.lo \
cpu-ia64.lo \
cpu-iamcu.lo \
cpu-ip2k.lo \
cpu-iq2000.lo \
cpu-kvx.lo \
cpu-lm32.lo \
cpu-loongarch.lo \
cpu-m10200.lo \
cpu-m10300.lo \
cpu-m32c.lo \
cpu-m32r.lo \
cpu-m68hc11.lo \
cpu-m68hc12.lo \
cpu-m68k.lo \
cpu-m9s12x.lo \
cpu-m9s12xg.lo \
cpu-mcore.lo \
cpu-mep.lo \
cpu-metag.lo \
cpu-microblaze.lo \
cpu-mips.lo \
cpu-mmix.lo \
cpu-moxie.lo \
cpu-msp430.lo \
cpu-mt.lo \
cpu-nds32.lo \
cpu-nfp.lo \
cpu-nios2.lo \
cpu-ns32k.lo \
cpu-or1k.lo \
cpu-pdp11.lo \
cpu-pj.lo \
cpu-powerpc.lo \
cpu-pru.lo \
cpu-riscv.lo \
cpu-rl78.lo \
cpu-rs6000.lo \
cpu-rx.lo \
cpu-s12z.lo \
cpu-s390.lo \
cpu-score.lo \
cpu-sh.lo \
cpu-sparc.lo \
cpu-spu.lo \
cpu-tic30.lo \
cpu-tic4x.lo \
cpu-tic54x.lo \
cpu-tic6x.lo \
cpu-tilegx.lo \
cpu-tilepro.lo \
cpu-v850.lo \
cpu-v850_rh850.lo \
cpu-vax.lo \
cpu-visium.lo \
cpu-wasm32.lo \
cpu-xgate.lo \
cpu-xstormy16.lo \
cpu-xtensa.lo \
cpu-z80.lo \
cpu-z8k.lo
ALL_MACHINES_CFILES = \
cpu-aarch64.c \
cpu-alpha.c \
cpu-amdgcn.c \
cpu-arc.c \
cpu-arm.c \
cpu-avr.c \
cpu-bfin.c \
cpu-bpf.c \
cpu-cr16.c \
cpu-cris.c \
cpu-crx.c \
cpu-csky.c \
cpu-d10v.c \
cpu-d30v.c \
cpu-dlx.c \
cpu-epiphany.c \
cpu-fr30.c \
cpu-frv.c \
cpu-ft32.c \
cpu-h8300.c \
cpu-hppa.c \
cpu-i386.c \
cpu-ia64.c \
cpu-iamcu.c \
cpu-ip2k.c \
cpu-iq2000.c \
cpu-kvx.c \
cpu-lm32.c \
cpu-loongarch.c \
cpu-m10200.c \
cpu-m10300.c \
cpu-m32c.c \
cpu-m32r.c \
cpu-m68hc11.c \
cpu-m68hc12.c \
cpu-m68k.c \
cpu-m9s12x.c \
cpu-m9s12xg.c \
cpu-mcore.c \
cpu-mep.c \
cpu-metag.c \
cpu-microblaze.c \
cpu-mips.c \
cpu-mmix.c \
cpu-moxie.c \
cpu-msp430.c \
cpu-mt.c \
cpu-nds32.c \
cpu-nfp.c \
cpu-nios2.c \
cpu-ns32k.c \
cpu-or1k.c \
cpu-pdp11.c \
cpu-pj.c \
cpu-powerpc.c \
cpu-pru.c \
cpu-riscv.c \
cpu-rl78.c \
cpu-rs6000.c \
cpu-rx.c \
cpu-s12z.c \
cpu-s390.c \
cpu-score.c \
cpu-sh.c \
cpu-sparc.c \
cpu-spu.c \
cpu-tic30.c \
cpu-tic4x.c \
cpu-tic54x.c \
cpu-tic6x.c \
cpu-tilegx.c \
cpu-tilepro.c \
cpu-v850.c \
cpu-v850_rh850.c \
cpu-vax.c \
cpu-visium.c \
cpu-wasm32.c \
cpu-xgate.c \
cpu-xstormy16.c \
cpu-xtensa.c \
cpu-z80.c \
cpu-z8k.c
# The .o files needed by all of the 32 bit vectors that are configured into
# target_vector in targets.c if configured with --enable-targets=all.
BFD32_BACKENDS = \
aout-cris.lo \
aout-ns32k.lo \
aout32.lo \
cf-i386lynx.lo \
coff-go32.lo \
coff-i386.lo \
coff-mips.lo \
coff-rs6000.lo \
coff-sh.lo \
coff-stgo32.lo \
coff-tic30.lo \
coff-tic4x.lo \
coff-tic54x.lo \
coff-z80.lo \
coff-z8k.lo \
coffgen.lo \
cofflink.lo \
dwarf1.lo \
dwarf2.lo \
ecoff.lo \
ecofflink.lo \
elf-attrs.lo \
elf-eh-frame.lo \
elf-ifunc.lo \
elf-m10200.lo \
elf-m10300.lo \
elf-nacl.lo \
elf-sframe.lo \
elf-strtab.lo \
elf-vxworks.lo \
elf.lo \
elf32-am33lin.lo \
elf32-arc.lo \
elf32-arm.lo \
elf32-avr.lo \
elf32-bfin.lo \
elf32-cr16.lo \
elf32-cris.lo \
elf32-crx.lo \
elf32-csky.lo \
elf32-d10v.lo \
elf32-d30v.lo \
elf32-dlx.lo \
elf32-epiphany.lo \
elf32-fr30.lo \
elf32-frv.lo \
elf32-ft32.lo \
elf32-gen.lo \
elf32-h8300.lo \
elf32-hppa.lo \
elf32-i386.lo \
elf32-ip2k.lo \
elf32-iq2000.lo \
elf32-lm32.lo \
elf32-m32c.lo \
elf32-m32r.lo \
elf32-m68hc11.lo \
elf32-m68hc12.lo \
elf32-m68hc1x.lo \
elf32-m68k.lo \
elf32-mcore.lo \
elf32-mep.lo \
elf32-metag.lo \
elf32-microblaze.lo \
elf32-moxie.lo \
elf32-msp430.lo \
elf32-mt.lo \
elf32-nds32.lo \
elf32-nios2.lo \
elf32-or1k.lo \
elf32-pj.lo \
elf32-ppc.lo \
elf32-pru.lo \
elf32-rl78.lo \
elf32-rx.lo \
elf32-s12z.lo \
elf32-s390.lo \
elf32-sh.lo \
elf32-sparc.lo \
elf32-spu.lo \
elf32-tic6x.lo \
elf32-tilegx.lo \
elf32-tilepro.lo \
elf32-v850.lo \
elf32-vax.lo \
elf32-visium.lo \
elf32-wasm32.lo \
elf32-xgate.lo \
elf32-xstormy16.lo \
elf32-xtensa.lo \
elf32-z80.lo \
elf32.lo \
elflink.lo \
elfxx-sparc.lo \
elfxx-tilegx.lo \
elfxx-x86.lo \
i386aout.lo \
i386bsd.lo \
i386lynx.lo \
i386msdos.lo \
mach-o-arm.lo \
mach-o-i386.lo \
mach-o.lo \
ns32knetbsd.lo \
pc532-mach.lo \
pdb.lo \
pdp11.lo \
pe-arm-wince.lo \
pe-arm.lo \
pe-i386.lo \
pe-mcore.lo \
pe-sh.lo \
pef.lo \
pei-arm-wince.lo \
pei-arm.lo \
pei-i386.lo \
pei-mcore.lo \
pei-sh.lo \
peigen.lo \
plugin.lo \
ppcboot.lo \
reloc16.lo \
som.lo \
vax1knetbsd.lo \
vaxnetbsd.lo \
vms-lib.lo \
vms-misc.lo \
wasm-module.lo \
xcofflink.lo \
xsym.lo \
xtensa-dynconfig.lo \
xtensa-isa.lo \
xtensa-modules.lo
BFD32_BACKENDS_CFILES = \
aout-cris.c \
aout-ns32k.c \
aout32.c \
cf-i386lynx.c \
coff-go32.c \
coff-i386.c \
coff-mips.c \
coff-rs6000.c \
coff-sh.c \
coff-stgo32.c \
coff-tic30.c \
coff-tic4x.c \
coff-tic54x.c \
coff-z80.c \
coff-z8k.c \
coffgen.c \
cofflink.c \
dwarf1.c \
dwarf2.c \
ecoff.c \
ecofflink.c \
elf-attrs.c \
elf-eh-frame.c \
elf-ifunc.c \
elf-m10200.c \
elf-m10300.c \
elf-nacl.c \
elf-sframe.c \
elf-strtab.c \
elf-vxworks.c \
elf.c \
elf32-am33lin.c \
elf32-arc.c \
elf32-arm.c \
elf32-avr.c \
elf32-bfin.c \
elf32-cr16.c \
elf32-cris.c \
elf32-crx.c \
elf32-csky.c \
elf32-d10v.c \
elf32-d30v.c \
elf32-dlx.c \
elf32-epiphany.c \
elf32-fr30.c \
elf32-frv.c \
elf32-ft32.c \
elf32-gen.c \
elf32-h8300.c \
elf32-hppa.c \
elf32-i386.c \
elf32-ip2k.c \
elf32-iq2000.c \
elf32-lm32.c \
elf32-m32c.c \
elf32-m32r.c \
elf32-m68hc11.c \
elf32-m68hc12.c \
elf32-m68hc1x.c \
elf32-m68k.c \
elf32-mcore.c \
elf32-mep.c \
elf32-metag.c \
elf32-microblaze.c \
elf32-moxie.c \
elf32-msp430.c \
elf32-mt.c \
elf32-nds32.c \
elf32-nios2.c \
elf32-or1k.c \
elf32-pj.c \
elf32-ppc.c \
elf32-pru.c \
elf32-rl78.c \
elf32-rx.c \
elf32-s12z.c \
elf32-s390.c \
elf32-sh.c \
elf32-sparc.c \
elf32-spu.c \
elf32-tic6x.c \
elf32-tilegx.c \
elf32-tilepro.c \
elf32-v850.c \
elf32-vax.c \
elf32-visium.c \
elf32-wasm32.c \
elf32-xgate.c \
elf32-xstormy16.c \
elf32-xtensa.c \
elf32-z80.c \
elf32.c \
elflink.c \
elfxx-sparc.c \
elfxx-tilegx.c \
elfxx-x86.c \
i386aout.c \
i386bsd.c \
i386lynx.c \
i386msdos.c \
mach-o-arm.c \
mach-o-i386.c \
mach-o.c \
ns32knetbsd.c \
pc532-mach.c \
pdb.c \
pdp11.c \
pe-arm-wince.c \
pe-arm.c \
pe-i386.c \
pe-mcore.c \
pe-sh.c \
pef.c \
pei-arm-wince.c \
pei-arm.c \
pei-i386.c \
pei-mcore.c \
pei-sh.c \
plugin.c \
ppcboot.c \
reloc16.c \
som.c \
vax1knetbsd.c \
vaxnetbsd.c \
vms-lib.c \
vms-misc.c \
wasm-module.c \
xcofflink.c \
xsym.c \
xtensa-dynconfig.c \
xtensa-isa.c \
xtensa-modules.c
# The .o files needed by all of the 64 bit vectors that are configured into
# target_vector in targets.c if configured with --enable-targets=all
# and --enable-64-bit-bfd.
# elf32-ia64.c requires a 64-bit bfd_vma, and hence can not be put in
# BFD32_BACKENDS.
BFD64_BACKENDS = \
aix5ppc-core.lo \
aout64.lo \
coff-alpha.lo \
coff-x86_64.lo \
coff64-rs6000.lo \
elf32-aarch64.lo \
elf32-ia64.lo \
elf32-kvx.lo \
elf32-loongarch.lo \
elf32-mips.lo \
elf32-riscv.lo \
elf32-score.lo \
elf32-score7.lo \
elf64-aarch64.lo \
elf64-alpha.lo \
elf64-amdgcn.lo \
elf64-bpf.lo \
elf64-gen.lo \
elf64-hppa.lo \
elf64-ia64-vms.lo \
elf64-ia64.lo \
elf64-kvx.lo \
elf64-loongarch.lo \
elf64-mips.lo \
elf64-mmix.lo \
elf64-nfp.lo \
elf64-ppc.lo \
elf64-riscv.lo \
elf64-s390.lo \
elf64-sparc.lo \
elf64-tilegx.lo \
elf64-x86-64.lo \
elf64.lo \
elfn32-mips.lo \
elfxx-aarch64.lo \
elfxx-ia64.lo \
elfxx-kvx.lo \
elfxx-loongarch.lo \
elfxx-mips.lo \
elfxx-riscv.lo \
elfxx-x86.lo \
mach-o-aarch64.lo \
mach-o-x86-64.lo \
mmo.lo \
pe-aarch64.lo \
pe-aarch64igen.lo \
pe-loongarch64igen.lo \
pe-riscv64igen.lo \
pe-x86_64.lo \
pei-aarch64.lo \
pei-ia64.lo \
pei-loongarch64.lo \
pei-riscv64.lo \
pei-x86_64.lo \
pepigen.lo \
pex64igen.lo \
vms-alpha.lo
BFD64_BACKENDS_CFILES = \
aix5ppc-core.c \
aout64.c \
coff-alpha.c \
coff-x86_64.c \
coff64-rs6000.c \
elf32-mips.c \
elf32-score.c \
elf32-score7.c \
elf64-alpha.c \
elf64-amdgcn.c \
elf64-bpf.c \
elf64-gen.c \
elf64-hppa.c \
elf64-ia64-vms.c \
elf64-mips.c \
elf64-mmix.c \
elf64-nfp.c \
elf64-ppc.c \
elf64-s390.c \
elf64-sparc.c \
elf64-tilegx.c \
elf64-x86-64.c \
elf64.c \
elfn32-mips.c \
elfxx-aarch64.c \
elfxx-ia64.c \
elfxx-kvx.c \
elfxx-loongarch.c \
elfxx-mips.c \
elfxx-riscv.c \
elfxx-x86.c \
mach-o-aarch64.c \
mach-o-x86-64.c \
mmo.c \
pe-aarch64.c \
pe-x86_64.c \
pei-aarch64.c \
pei-ia64.c \
pei-loongarch64.c \
pei-riscv64.c \
pei-x86_64.c \
vms-alpha.c
OPTIONAL_BACKENDS = \
cisco-core.lo \
hpux-core.lo \
irix-core.lo \
lynx-core.lo \
netbsd-core.lo \
osf-core.lo \
rs6000-core.lo \
trad-core.lo
OPTIONAL_BACKENDS_CFILES = \
cisco-core.c \
hpux-core.c \
irix-core.c \
lynx-core.c \
netbsd-core.c \
osf-core.c \
rs6000-core.c \
trad-core.c
# Reconfigure if config.bfd or configure.host changes.
# development.sh is used to determine -Werror default.
CONFIG_STATUS_DEPENDENCIES = \
$(srcdir)/config.bfd \
$(srcdir)/configure.host \
$(srcdir)/development.sh
# These are defined by configure:
WORDSIZE = 64
ALL_BACKENDS = $(BFD64_BACKENDS) $(BFD32_BACKENDS)
BFD_BACKENDS = elf32-mips.lo elfxx-mips.lo elf-vxworks.lo elf32.lo elf.lo elflink.lo elf-attrs.lo elf-strtab.lo elf-eh-frame.lo elf-sframe.lo dwarf1.lo dwarf2.lo ecofflink.lo coffgen.lo coff-mips.lo ecoff.lo elfn32-mips.lo elf64-mips.lo elf64.lo elf64-gen.lo elf32-gen.lo plugin.lo
BFD_MACHINES = cpu-mips.lo
TDEFAULTS = -DDEFAULT_VECTOR=mips_elf32_trad_be_vec -DSELECT_VECS='&mips_elf32_trad_be_vec,&mips_elf32_trad_le_vec,&mips_ecoff_be_vec,&mips_ecoff_le_vec,&mips_elf32_ntrad_be_vec,&mips_elf64_trad_be_vec,&mips_elf32_ntrad_le_vec,&mips_elf64_trad_le_vec,&elf64_le_vec,&elf64_be_vec,&elf32_le_vec,&elf32_be_vec' -DSELECT_ARCHITECTURES='&bfd_mips_arch'
HAVEVECS = -DHAVE_mips_elf32_trad_be_vec -DHAVE_mips_elf32_trad_le_vec -DHAVE_mips_ecoff_be_vec -DHAVE_mips_ecoff_le_vec -DHAVE_mips_elf32_ntrad_be_vec -DHAVE_mips_elf64_trad_be_vec -DHAVE_mips_elf32_ntrad_le_vec -DHAVE_mips_elf64_trad_le_vec -DHAVE_elf64_le_vec -DHAVE_elf64_be_vec -DHAVE_elf32_le_vec -DHAVE_elf32_be_vec
# C source files that correspond to .o's.
SOURCE_CFILES = \
$(BFD32_LIBS_CFILES) \
$(BFD64_LIBS_CFILES) \
$(ALL_MACHINES_CFILES) \
$(BFD32_BACKENDS_CFILES) \
$(BFD64_BACKENDS_CFILES) \
$(OPTIONAL_BACKENDS_CFILES)
BUILD_CFILES = \
elf32-aarch64.c elf64-aarch64.c \
elf32-kvx.c elf64-kvx.c \
elf32-ia64.c elf64-ia64.c \
elf32-loongarch.c elf64-loongarch.c \
elf32-riscv.c elf64-riscv.c \
peigen.c pepigen.c pex64igen.c pe-aarch64igen.c pe-loongarch64igen.c \
pe-riscv64igen.c
CFILES = $(SOURCE_CFILES) $(BUILD_CFILES)
SOURCE_HFILES = \
aout-target.h aoutx.h arc-got.h arc-plt.h \
coff-arm.h coff-bfd.h coffcode.h coffswap.h \
cpu-aarch64.h cpu-arm.h cpu-h8300.h cpu-m68k.h cpu-riscv.h \
ecoff-bfd.h ecoffswap.h \
elf32-arm.h elf32-avr.h elf32-bfin.h elf32-cr16.h elf32-csky.h \
elf32-dlx.h elf32-hppa.h elf32-m68hc1x.h elf32-m68k.h \
elf32-metag.h elf32-nds32.h elf32-nios2.h elf32-ppc.h \
elf32-rx.h elf32-score.h elf32-sh-relocs.h elf32-spu.h \
elf32-tic6x.h elf32-tilegx.h elf32-tilepro.h elf32-v850.h \
elf64-hppa.h elf64-ppc.h elf64-tilegx.h \
elf-bfd.h elfcode.h elfcore.h elf-hppa.h elf-linker-x86.h \
elf-linux-core.h elf-nacl.h elf-s390.h elf-vxworks.h \
elfxx-aarch64.h elfxx-ia64.h elfxx-mips.h elfxx-riscv.h \
elfxx-sparc.h elfxx-tilegx.h elfxx-x86.h elfxx-loongarch.h \
genlink.h go32stub.h \
libaout.h libbfd.h libcoff.h libecoff.h libhppa.h \
libpei.h libxcoff.h \
mach-o.h \
netbsd.h ns32k.h \
pef.h pef-traceback.h peicode.h plugin.h \
som.h sysdep.h \
version.h vms.h \
wasm-module.h \
xcofflink.h xsym.h
BUILD_HFILES = \
bfdver.h elf32-target.h elf64-target.h targmatch.h
# Ensure they are built early:
BUILT_SOURCES = $(BUILD_HFILES) # $(BUILD_CFILES)
HFILES = $(SOURCE_HFILES) $(BUILD_HFILES)
BFD_H_DEPS = $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h $(INCDIR)/diagnostics.h
LOCAL_H_DEPS = libbfd.h sysdep.h config.h
SRC_POTFILES = $(SOURCE_CFILES) $(SOURCE_HFILES)
BLD_POTFILES = $(BUILD_CFILES) $(BUILD_HFILES)
# Various kinds of .o files to put in libbfd.a:
# BFD_BACKENDS Routines the configured targets need.
# BFD_MACHINES Architecture-specific routines the configured targets need.
# COREFILE Core file routines for a native configuration
# bfd64_libs Routines for 64bit support
OFILES = $(BFD_BACKENDS) $(BFD_MACHINES) $(BFD64_LIBS)
# Since BFD64_LIBS is optional and we can't have substitution in
# libbfd_la_SOURCES, we put BFD64_LIBS in OFILES instead.
# However, list all sources in EXTRA_libbfd_la_SOURCES so the
# dependency tracking fragments are picked up in the Makefile.
libbfd_la_SOURCES = $(BFD32_LIBS_CFILES)
EXTRA_libbfd_la_SOURCES = $(CFILES)
libbfd_la_DEPENDENCIES = $(OFILES) ofiles ../libsframe/libsframe.la
libbfd_la_LIBADD = `cat ofiles` $(LIBDL) $(ZLIB) $(ZSTD_LIBS) ../libsframe/libsframe.la
BFD_H_FILES = bfd-in.h libbfd.c hash.c section.c syms.c \
archive.c archures.c bfd.c bfdio.c bfdwin.c \
cache.c compress.c corefile.c format.c linker.c opncls.c \
reloc.c simple.c stab-syms.c stabs.c targets.c
BFD64_H_FILES = archive64.c
LIBBFD_H_FILES = libbfd-in.h libbfd.c bfd.c bfdio.c \
archive.c archures.c bfdwin.c cache.c hash.c linker.c opncls.c \
reloc.c section.c stabs.c targets.c
LIBCOFF_H_FILES = libcoff-in.h coffcode.h
# We only rebuild the header files automatically if we have been
# configured with --enable-maintainer-mode.
REGEN_HEADER = \
( \
set -e; \
echo "$$H_FILES" | sed -f $(srcdir)/doc/header.sed; \
for file in $$H_FILES; do \
file="$(srcdir)/$$file"; \
case $$file in \
*-in.h) cat $$file;; \
*) echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
-e 's,$$,. */,'; \
$(MKDOC) $$CHEW_FLAGS -f $(srcdir)/doc/proto.str < $$file;; \
esac; \
done; \
echo "\#ifdef __cplusplus"; \
echo "}"; \
echo "\#endif"; \
echo "\#endif"; \
)
DOCFILES = \
doc/aoutx.texi \
doc/archive.texi \
doc/archures.texi \
doc/bfdio.texi \
doc/bfdt.texi \
doc/bfdver.texi \
doc/bfdwin.texi \
doc/cache.texi \
doc/coffcode.texi \
doc/corefile.texi \
doc/elfcode.texi \
doc/elf.texi \
doc/format.texi \
doc/hash.texi \
doc/libbfd.texi \
doc/linker.texi \
doc/mmo.texi \
doc/opncls.texi \
doc/reloc.texi \
doc/section.texi \
doc/syms.texi \
doc/targets.texi
# SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction
# between VPATH and suffix rules. If you use GNU Make, perhaps other Makes,
# you don't need these three:
SRCDOC = \
$(srcdir)/aoutx.h $(srcdir)/archive.c \
$(srcdir)/archures.c $(srcdir)/bfd.c \
$(srcdir)/bfdio.c $(srcdir)/bfdwin.c \
$(srcdir)/cache.c $(srcdir)/coffcode.h \
$(srcdir)/corefile.c $(srcdir)/elf.c \
$(srcdir)/elfcode.h $(srcdir)/format.c \
$(srcdir)/libbfd.c $(srcdir)/opncls.c \
$(srcdir)/reloc.c $(srcdir)/section.c \
$(srcdir)/syms.c $(srcdir)/targets.c \
$(srcdir)/hash.c $(srcdir)/linker.c \
$(srcdir)/mmo.c
SRCPROT = $(srcdir)/archive.c $(srcdir)/archures.c \
$(srcdir)/bfd.c $(srcdir)/coffcode.h $(srcdir)/corefile.c \
$(srcdir)/format.c $(srcdir)/libbfd.c \
$(srcdir)/bfdio.c $(srcdir)/bfdwin.c \
$(srcdir)/opncls.c $(srcdir)/reloc.c \
$(srcdir)/section.c $(srcdir)/syms.c \
$(srcdir)/targets.c
SRCIPROT = $(srcdir)/cache.c $(srcdir)/libbfd.c \
$(srcdir)/bfdio.c $(srcdir)/bfdwin.c \
$(srcdir)/reloc.c $(srcdir)/cpu-h8300.c \
$(srcdir)/archures.c
TEXIDIR = $(srcdir)/../texinfo/fsf
info_TEXINFOS = doc/bfd.texi
doc_bfd_TEXINFOS = $(DOCFILES) doc/bfdsumm.texi
AM_MAKEINFOFLAGS = --no-split -I "$(srcdir)/doc" -I doc
TEXI2DVI = texi2dvi -I "$(srcdir)/doc" -I doc
MKDOC = doc/chew$(EXEEXT_FOR_BUILD)
# We can't replace these rules with an implicit rule, because
# makes without VPATH support couldn't find the .h files in `..'.
# We do not depend on chew directly so that we can distribute the info
# files, and permit people to rebuild them, without requiring the makeinfo
# program. If somebody tries to rebuild info, but none of the .texi files
# have changed, then nothing will be rebuilt.
REGEN_TEXI = \
( \
set -e; \
$(MKDOC) -f $(srcdir)/doc/doc.str < $< > $@.tmp; \
texi=$@; \
texi=$${texi%.stamp}.texi; \
test -e $$texi || test ! -f $(srcdir)/$$texi || $(LN_S) $(srcdir)/$$texi .; \
$(SHELL) $(srcdir)/../move-if-change $@.tmp $$texi; \
touch $@; \
)
noinst_TEXINFOS = doc/bfdint.texi
all: $(BUILT_SOURCES) config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
.SUFFIXES: .c .dvi .lo .o .obj .ps
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(srcdir)/doc/local.mk $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(srcdir)/doc/local.mk $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: # $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.in: # $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
bfd-in3.h: $(top_builddir)/config.status $(srcdir)/bfd-in2.h
cd $(top_builddir) && $(SHELL) ./config.status $@
po/Makefile.in: $(top_builddir)/config.status $(top_srcdir)/po/Make-in
cd $(top_builddir) && $(SHELL) ./config.status $@
install-bfdlibLTLIBRARIES: $(bfdlib_LTLIBRARIES)
@$(NORMAL_INSTALL)
@list='$(bfdlib_LTLIBRARIES)'; test -n "$(bfdlibdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
list2="$$list2 $$p"; \
else :; fi; \
done; \
test -z "$$list2" || { \
echo " $(MKDIR_P) '$(DESTDIR)$(bfdlibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(bfdlibdir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(bfdlibdir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(bfdlibdir)"; \
}
uninstall-bfdlibLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(bfdlib_LTLIBRARIES)'; test -n "$(bfdlibdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(bfdlibdir)/$$f'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(bfdlibdir)/$$f"; \
done
clean-bfdlibLTLIBRARIES:
-test -z "$(bfdlib_LTLIBRARIES)" || rm -f $(bfdlib_LTLIBRARIES)
@list='$(bfdlib_LTLIBRARIES)'; \
locs=`for p in $$list; do echo $$p; done | \
sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
sort -u`; \
test -z "$$locs" || { \
echo rm -f $${locs}; \
rm -f $${locs}; \
}
clean-noinstLTLIBRARIES:
-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@list='$(noinst_LTLIBRARIES)'; \
locs=`for p in $$list; do echo $$p; done | \
sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
sort -u`; \
test -z "$$locs" || { \
echo rm -f $${locs}; \
rm -f $${locs}; \
}
libbfd.la: $(libbfd_la_OBJECTS) $(libbfd_la_DEPENDENCIES) $(EXTRA_libbfd_la_DEPENDENCIES)
+ $(AM_V_CCLD)$(libbfd_la_LINK) $(am_libbfd_la_rpath) $(libbfd_la_OBJECTS) $(libbfd_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
include ./$(DEPDIR)/aix5ppc-core.Plo
include ./$(DEPDIR)/aout-cris.Plo
include ./$(DEPDIR)/aout-ns32k.Plo
include ./$(DEPDIR)/aout32.Plo
include ./$(DEPDIR)/aout64.Plo
include ./$(DEPDIR)/archive.Plo
include ./$(DEPDIR)/archive64.Plo
include ./$(DEPDIR)/archures.Plo
include ./$(DEPDIR)/bfd.Plo
include ./$(DEPDIR)/bfdio.Plo
include ./$(DEPDIR)/bfdwin.Plo
include ./$(DEPDIR)/binary.Plo
include ./$(DEPDIR)/cache.Plo
include ./$(DEPDIR)/cf-i386lynx.Plo
include ./$(DEPDIR)/cisco-core.Plo
include ./$(DEPDIR)/coff-alpha.Plo
include ./$(DEPDIR)/coff-bfd.Plo
include ./$(DEPDIR)/coff-go32.Plo
include ./$(DEPDIR)/coff-i386.Plo
include ./$(DEPDIR)/coff-mips.Plo
include ./$(DEPDIR)/coff-rs6000.Plo
include ./$(DEPDIR)/coff-sh.Plo
include ./$(DEPDIR)/coff-stgo32.Plo
include ./$(DEPDIR)/coff-tic30.Plo
include ./$(DEPDIR)/coff-tic4x.Plo
include ./$(DEPDIR)/coff-tic54x.Plo
include ./$(DEPDIR)/coff-x86_64.Plo
include ./$(DEPDIR)/coff-z80.Plo
include ./$(DEPDIR)/coff-z8k.Plo
include ./$(DEPDIR)/coff64-rs6000.Plo
include ./$(DEPDIR)/coffgen.Plo
include ./$(DEPDIR)/cofflink.Plo
include ./$(DEPDIR)/compress.Plo
include ./$(DEPDIR)/corefile.Plo
include ./$(DEPDIR)/cpu-aarch64.Plo
include ./$(DEPDIR)/cpu-alpha.Plo
include ./$(DEPDIR)/cpu-amdgcn.Plo
include ./$(DEPDIR)/cpu-arc.Plo
include ./$(DEPDIR)/cpu-arm.Plo
include ./$(DEPDIR)/cpu-avr.Plo
include ./$(DEPDIR)/cpu-bfin.Plo
include ./$(DEPDIR)/cpu-bpf.Plo
include ./$(DEPDIR)/cpu-cr16.Plo
include ./$(DEPDIR)/cpu-cris.Plo
include ./$(DEPDIR)/cpu-crx.Plo
include ./$(DEPDIR)/cpu-csky.Plo
include ./$(DEPDIR)/cpu-d10v.Plo
include ./$(DEPDIR)/cpu-d30v.Plo
include ./$(DEPDIR)/cpu-dlx.Plo
include ./$(DEPDIR)/cpu-epiphany.Plo
include ./$(DEPDIR)/cpu-fr30.Plo
include ./$(DEPDIR)/cpu-frv.Plo
include ./$(DEPDIR)/cpu-ft32.Plo
include ./$(DEPDIR)/cpu-h8300.Plo
include ./$(DEPDIR)/cpu-hppa.Plo
include ./$(DEPDIR)/cpu-i386.Plo
include ./$(DEPDIR)/cpu-ia64.Plo
include ./$(DEPDIR)/cpu-iamcu.Plo
include ./$(DEPDIR)/cpu-ip2k.Plo
include ./$(DEPDIR)/cpu-iq2000.Plo
include ./$(DEPDIR)/cpu-kvx.Plo
include ./$(DEPDIR)/cpu-lm32.Plo
include ./$(DEPDIR)/cpu-loongarch.Plo
include ./$(DEPDIR)/cpu-m10200.Plo
include ./$(DEPDIR)/cpu-m10300.Plo
include ./$(DEPDIR)/cpu-m32c.Plo
include ./$(DEPDIR)/cpu-m32r.Plo
include ./$(DEPDIR)/cpu-m68hc11.Plo
include ./$(DEPDIR)/cpu-m68hc12.Plo
include ./$(DEPDIR)/cpu-m68k.Plo
include ./$(DEPDIR)/cpu-m9s12x.Plo
include ./$(DEPDIR)/cpu-m9s12xg.Plo
include ./$(DEPDIR)/cpu-mcore.Plo
include ./$(DEPDIR)/cpu-mep.Plo
include ./$(DEPDIR)/cpu-metag.Plo
include ./$(DEPDIR)/cpu-microblaze.Plo
include ./$(DEPDIR)/cpu-mips.Plo
include ./$(DEPDIR)/cpu-mmix.Plo
include ./$(DEPDIR)/cpu-moxie.Plo
include ./$(DEPDIR)/cpu-msp430.Plo
include ./$(DEPDIR)/cpu-mt.Plo
include ./$(DEPDIR)/cpu-nds32.Plo
include ./$(DEPDIR)/cpu-nfp.Plo
include ./$(DEPDIR)/cpu-nios2.Plo
include ./$(DEPDIR)/cpu-ns32k.Plo
include ./$(DEPDIR)/cpu-or1k.Plo
include ./$(DEPDIR)/cpu-pdp11.Plo
include ./$(DEPDIR)/cpu-pj.Plo
include ./$(DEPDIR)/cpu-powerpc.Plo
include ./$(DEPDIR)/cpu-pru.Plo
include ./$(DEPDIR)/cpu-riscv.Plo
include ./$(DEPDIR)/cpu-rl78.Plo
include ./$(DEPDIR)/cpu-rs6000.Plo
include ./$(DEPDIR)/cpu-rx.Plo
include ./$(DEPDIR)/cpu-s12z.Plo
include ./$(DEPDIR)/cpu-s390.Plo
include ./$(DEPDIR)/cpu-score.Plo
include ./$(DEPDIR)/cpu-sh.Plo
include ./$(DEPDIR)/cpu-sparc.Plo
include ./$(DEPDIR)/cpu-spu.Plo
include ./$(DEPDIR)/cpu-tic30.Plo
include ./$(DEPDIR)/cpu-tic4x.Plo
include ./$(DEPDIR)/cpu-tic54x.Plo
include ./$(DEPDIR)/cpu-tic6x.Plo
include ./$(DEPDIR)/cpu-tilegx.Plo
include ./$(DEPDIR)/cpu-tilepro.Plo
include ./$(DEPDIR)/cpu-v850.Plo
include ./$(DEPDIR)/cpu-v850_rh850.Plo
include ./$(DEPDIR)/cpu-vax.Plo
include ./$(DEPDIR)/cpu-visium.Plo
include ./$(DEPDIR)/cpu-wasm32.Plo
include ./$(DEPDIR)/cpu-xgate.Plo
include ./$(DEPDIR)/cpu-xstormy16.Plo
include ./$(DEPDIR)/cpu-xtensa.Plo
include ./$(DEPDIR)/cpu-z80.Plo
include ./$(DEPDIR)/cpu-z8k.Plo
include ./$(DEPDIR)/dwarf1.Plo
include ./$(DEPDIR)/dwarf2.Plo
include ./$(DEPDIR)/ecoff.Plo
include ./$(DEPDIR)/ecofflink.Plo
include ./$(DEPDIR)/elf-attrs.Plo
include ./$(DEPDIR)/elf-eh-frame.Plo
include ./$(DEPDIR)/elf-ifunc.Plo
include ./$(DEPDIR)/elf-m10200.Plo
include ./$(DEPDIR)/elf-m10300.Plo
include ./$(DEPDIR)/elf-nacl.Plo
include ./$(DEPDIR)/elf-properties.Plo
include ./$(DEPDIR)/elf-sframe.Plo
include ./$(DEPDIR)/elf-strtab.Plo
include ./$(DEPDIR)/elf-vxworks.Plo
include ./$(DEPDIR)/elf.Plo
include ./$(DEPDIR)/elf32-aarch64.Plo
include ./$(DEPDIR)/elf32-am33lin.Plo
include ./$(DEPDIR)/elf32-arc.Plo
include ./$(DEPDIR)/elf32-arm.Plo
include ./$(DEPDIR)/elf32-avr.Plo
include ./$(DEPDIR)/elf32-bfin.Plo
include ./$(DEPDIR)/elf32-cr16.Plo
include ./$(DEPDIR)/elf32-cris.Plo
include ./$(DEPDIR)/elf32-crx.Plo
include ./$(DEPDIR)/elf32-csky.Plo
include ./$(DEPDIR)/elf32-d10v.Plo
include ./$(DEPDIR)/elf32-d30v.Plo
include ./$(DEPDIR)/elf32-dlx.Plo
include ./$(DEPDIR)/elf32-epiphany.Plo
include ./$(DEPDIR)/elf32-fr30.Plo
include ./$(DEPDIR)/elf32-frv.Plo
include ./$(DEPDIR)/elf32-ft32.Plo
include ./$(DEPDIR)/elf32-gen.Plo
include ./$(DEPDIR)/elf32-h8300.Plo
include ./$(DEPDIR)/elf32-hppa.Plo
include ./$(DEPDIR)/elf32-i386.Plo
include ./$(DEPDIR)/elf32-ia64.Plo
include ./$(DEPDIR)/elf32-ip2k.Plo
include ./$(DEPDIR)/elf32-iq2000.Plo
include ./$(DEPDIR)/elf32-kvx.Plo
include ./$(DEPDIR)/elf32-lm32.Plo
include ./$(DEPDIR)/elf32-loongarch.Plo
include ./$(DEPDIR)/elf32-m32c.Plo
include ./$(DEPDIR)/elf32-m32r.Plo
include ./$(DEPDIR)/elf32-m68hc11.Plo
include ./$(DEPDIR)/elf32-m68hc12.Plo
include ./$(DEPDIR)/elf32-m68hc1x.Plo
include ./$(DEPDIR)/elf32-m68k.Plo
include ./$(DEPDIR)/elf32-mcore.Plo
include ./$(DEPDIR)/elf32-mep.Plo
include ./$(DEPDIR)/elf32-metag.Plo
include ./$(DEPDIR)/elf32-microblaze.Plo
include ./$(DEPDIR)/elf32-mips.Plo
include ./$(DEPDIR)/elf32-moxie.Plo
include ./$(DEPDIR)/elf32-msp430.Plo
include ./$(DEPDIR)/elf32-mt.Plo
include ./$(DEPDIR)/elf32-nds32.Plo
include ./$(DEPDIR)/elf32-nios2.Plo
include ./$(DEPDIR)/elf32-or1k.Plo
include ./$(DEPDIR)/elf32-pj.Plo
include ./$(DEPDIR)/elf32-ppc.Plo
include ./$(DEPDIR)/elf32-pru.Plo
include ./$(DEPDIR)/elf32-riscv.Plo
include ./$(DEPDIR)/elf32-rl78.Plo
include ./$(DEPDIR)/elf32-rx.Plo
include ./$(DEPDIR)/elf32-s12z.Plo
include ./$(DEPDIR)/elf32-s390.Plo
include ./$(DEPDIR)/elf32-score.Plo
include ./$(DEPDIR)/elf32-score7.Plo
include ./$(DEPDIR)/elf32-sh.Plo
include ./$(DEPDIR)/elf32-sparc.Plo
include ./$(DEPDIR)/elf32-spu.Plo
include ./$(DEPDIR)/elf32-tic6x.Plo
include ./$(DEPDIR)/elf32-tilegx.Plo
include ./$(DEPDIR)/elf32-tilepro.Plo
include ./$(DEPDIR)/elf32-v850.Plo
include ./$(DEPDIR)/elf32-vax.Plo
include ./$(DEPDIR)/elf32-visium.Plo
include ./$(DEPDIR)/elf32-wasm32.Plo
include ./$(DEPDIR)/elf32-xgate.Plo
include ./$(DEPDIR)/elf32-xstormy16.Plo
include ./$(DEPDIR)/elf32-xtensa.Plo
include ./$(DEPDIR)/elf32-z80.Plo
include ./$(DEPDIR)/elf32.Plo
include ./$(DEPDIR)/elf64-aarch64.Plo
include ./$(DEPDIR)/elf64-alpha.Plo
include ./$(DEPDIR)/elf64-amdgcn.Plo
include ./$(DEPDIR)/elf64-bpf.Plo
include ./$(DEPDIR)/elf64-gen.Plo
include ./$(DEPDIR)/elf64-hppa.Plo
include ./$(DEPDIR)/elf64-ia64-vms.Plo
include ./$(DEPDIR)/elf64-ia64.Plo
include ./$(DEPDIR)/elf64-kvx.Plo
include ./$(DEPDIR)/elf64-loongarch.Plo
include ./$(DEPDIR)/elf64-mips.Plo
include ./$(DEPDIR)/elf64-mmix.Plo
include ./$(DEPDIR)/elf64-nfp.Plo
include ./$(DEPDIR)/elf64-ppc.Plo
include ./$(DEPDIR)/elf64-riscv.Plo
include ./$(DEPDIR)/elf64-s390.Plo
include ./$(DEPDIR)/elf64-sparc.Plo
include ./$(DEPDIR)/elf64-tilegx.Plo
include ./$(DEPDIR)/elf64-x86-64.Plo
include ./$(DEPDIR)/elf64.Plo
include ./$(DEPDIR)/elflink.Plo
include ./$(DEPDIR)/elfn32-mips.Plo
include ./$(DEPDIR)/elfxx-aarch64.Plo
include ./$(DEPDIR)/elfxx-ia64.Plo
include ./$(DEPDIR)/elfxx-kvx.Plo
include ./$(DEPDIR)/elfxx-loongarch.Plo
include ./$(DEPDIR)/elfxx-mips.Plo
include ./$(DEPDIR)/elfxx-riscv.Plo
include ./$(DEPDIR)/elfxx-sparc.Plo
include ./$(DEPDIR)/elfxx-tilegx.Plo
include ./$(DEPDIR)/elfxx-x86.Plo
include ./$(DEPDIR)/format.Plo
include ./$(DEPDIR)/hash.Plo
include ./$(DEPDIR)/hpux-core.Plo
include ./$(DEPDIR)/i386aout.Plo
include ./$(DEPDIR)/i386bsd.Plo
include ./$(DEPDIR)/i386lynx.Plo
include ./$(DEPDIR)/i386msdos.Plo
include ./$(DEPDIR)/ihex.Plo
include ./$(DEPDIR)/irix-core.Plo
include ./$(DEPDIR)/libbfd.Plo
include ./$(DEPDIR)/linker.Plo
include ./$(DEPDIR)/lynx-core.Plo
include ./$(DEPDIR)/mach-o-aarch64.Plo
include ./$(DEPDIR)/mach-o-arm.Plo
include ./$(DEPDIR)/mach-o-i386.Plo
include ./$(DEPDIR)/mach-o-x86-64.Plo
include ./$(DEPDIR)/mach-o.Plo
include ./$(DEPDIR)/merge.Plo
include ./$(DEPDIR)/mmo.Plo
include ./$(DEPDIR)/netbsd-core.Plo
include ./$(DEPDIR)/ns32knetbsd.Plo
include ./$(DEPDIR)/opncls.Plo
include ./$(DEPDIR)/osf-core.Plo
include ./$(DEPDIR)/pc532-mach.Plo
include ./$(DEPDIR)/pdb.Plo
include ./$(DEPDIR)/pdp11.Plo
include ./$(DEPDIR)/pe-aarch64.Plo
include ./$(DEPDIR)/pe-aarch64igen.Plo
include ./$(DEPDIR)/pe-arm-wince.Plo
include ./$(DEPDIR)/pe-arm.Plo
include ./$(DEPDIR)/pe-i386.Plo
include ./$(DEPDIR)/pe-loongarch64igen.Plo
include ./$(DEPDIR)/pe-mcore.Plo
include ./$(DEPDIR)/pe-riscv64igen.Plo
include ./$(DEPDIR)/pe-sh.Plo
include ./$(DEPDIR)/pe-x86_64.Plo
include ./$(DEPDIR)/pef.Plo
include ./$(DEPDIR)/pei-aarch64.Plo
include ./$(DEPDIR)/pei-arm-wince.Plo
include ./$(DEPDIR)/pei-arm.Plo
include ./$(DEPDIR)/pei-i386.Plo
include ./$(DEPDIR)/pei-ia64.Plo
include ./$(DEPDIR)/pei-loongarch64.Plo
include ./$(DEPDIR)/pei-mcore.Plo
include ./$(DEPDIR)/pei-riscv64.Plo
include ./$(DEPDIR)/pei-sh.Plo
include ./$(DEPDIR)/pei-x86_64.Plo
include ./$(DEPDIR)/peigen.Plo
include ./$(DEPDIR)/pepigen.Plo
include ./$(DEPDIR)/pex64igen.Plo
include ./$(DEPDIR)/plugin.Plo
include ./$(DEPDIR)/ppcboot.Plo
include ./$(DEPDIR)/reloc.Plo
include ./$(DEPDIR)/reloc16.Plo
include ./$(DEPDIR)/rs6000-core.Plo
include ./$(DEPDIR)/section.Plo
include ./$(DEPDIR)/simple.Plo
include ./$(DEPDIR)/som.Plo
include ./$(DEPDIR)/srec.Plo
include ./$(DEPDIR)/stab-syms.Plo
include ./$(DEPDIR)/stabs.Plo
include ./$(DEPDIR)/syms.Plo
include ./$(DEPDIR)/targets.Plo
include ./$(DEPDIR)/tekhex.Plo
include ./$(DEPDIR)/trad-core.Plo
include ./$(DEPDIR)/vax1knetbsd.Plo
include ./$(DEPDIR)/vaxnetbsd.Plo
include ./$(DEPDIR)/verilog.Plo
include ./$(DEPDIR)/vms-alpha.Plo
include ./$(DEPDIR)/vms-lib.Plo
include ./$(DEPDIR)/vms-misc.Plo
include ./$(DEPDIR)/wasm-module.Plo
include ./$(DEPDIR)/xcofflink.Plo
include ./$(DEPDIR)/xsym.Plo
include ./$(DEPDIR)/xtensa-dynconfig.Plo
include ./$(DEPDIR)/xtensa-isa.Plo
include ./$(DEPDIR)/xtensa-modules.Plo
.c.o:
$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
# $(AM_V_CC)source='$<' object='$@' libtool=no \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(AM_V_CC_no)$(COMPILE) -c -o $@ $<
.c.obj:
$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
# $(AM_V_CC)source='$<' object='$@' libtool=no \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
# $(AM_V_CC)source='$<' object='$@' libtool=yes \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
doc/$(am__dirstamp):
@$(MKDIR_P) doc
@: > doc/$(am__dirstamp)
doc/bfd.info: doc/bfd.texi $(doc_bfd_TEXINFOS)
@test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp)
$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
-o $@ `test -f 'doc/bfd.texi' || echo '$(srcdir)/'`doc/bfd.texi; \
then \
rc=0; \
else \
rc=$$?; \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
doc/bfd.dvi: doc/bfd.texi $(doc_bfd_TEXINFOS) doc/$(am__dirstamp)
$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
`test -f 'doc/bfd.texi' || echo '$(srcdir)/'`doc/bfd.texi
doc/bfd.pdf: doc/bfd.texi $(doc_bfd_TEXINFOS) doc/$(am__dirstamp)
$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
`test -f 'doc/bfd.texi' || echo '$(srcdir)/'`doc/bfd.texi
doc/bfd.html: doc/bfd.texi $(doc_bfd_TEXINFOS) doc/$(am__dirstamp)
$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
-o $(@:.html=.htp) `test -f 'doc/bfd.texi' || echo '$(srcdir)/'`doc/bfd.texi; \
then \
rm -rf $@ && mv $(@:.html=.htp) $@; \
else \
rm -rf $(@:.html=.htp); exit 1; \
fi
.dvi.ps:
$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) $(AM_V_texinfo) -o $@ $<
uninstall-dvi-am:
@$(NORMAL_UNINSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
rm -f "$(DESTDIR)$(dvidir)/$$f"; \
done
uninstall-html-am:
@$(NORMAL_UNINSTALL)
@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
done
uninstall-info-am:
@$(PRE_UNINSTALL)
@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
uninstall-pdf-am:
@$(NORMAL_UNINSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
done
uninstall-ps-am:
@$(NORMAL_UNINSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
rm -f "$(DESTDIR)$(psdir)/$$f"; \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
if test -f $$file; then \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f "$(distdir)/$$relfile" || \
cp -p $$file "$(distdir)/$$relfile"; \
else :; fi; \
done; \
done
mostlyclean-aminfo:
-rm -rf doc/bfd.t2d doc/bfd.t2p
clean-aminfo:
-test -z "doc/bfd.dvi doc/bfd.pdf doc/bfd.ps doc/bfd.html" \
|| rm -rf doc/bfd.dvi doc/bfd.pdf doc/bfd.ps doc/bfd.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
install-bfdincludeHEADERS: $(bfdinclude_HEADERS)
@$(NORMAL_INSTALL)
@list='$(bfdinclude_HEADERS)'; test -n "$(bfdincludedir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(bfdincludedir)'"; \
$(MKDIR_P) "$(DESTDIR)$(bfdincludedir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(bfdincludedir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(bfdincludedir)" || exit $$?; \
done
uninstall-bfdincludeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(bfdinclude_HEADERS)'; test -n "$(bfdincludedir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(bfdincludedir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
check-am: all-am
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(INFO_DEPS) $(LTLIBRARIES) $(HEADERS) config.h
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(bfdlibdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(bfdincludedir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-rm -f doc/$(am__dirstamp)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive
clean-am: clean-aminfo clean-bfdlibLTLIBRARIES clean-generic \
clean-libtool clean-noinstLTLIBRARIES mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am: $(DVIS)
html: html-recursive
html-am: $(HTMLS) html-local
info: info-recursive
info-am: $(INFO_DEPS)
install-data-am: install-bfdincludeHEADERS install-bfdlibLTLIBRARIES \
install-info-am
install-dvi: install-dvi-recursive
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
$(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
done
install-exec-am:
install-html: install-html-recursive
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
d2=$$d$$p; \
if test -d "$$d2"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d2"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-recursive
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
$(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
fi; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
echo "$$ifile"; \
else : ; fi; \
done; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
@if $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man:
install-pdf: install-pdf-recursive
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am: $(PDFS)
ps: ps-recursive
ps-am: $(PSS)
uninstall-am: uninstall-bfdincludeHEADERS uninstall-bfdlibLTLIBRARIES \
uninstall-dvi-am uninstall-html-am uninstall-info-am \
uninstall-pdf-am uninstall-ps-am
.MAKE: $(am__recursive_targets) all check install install-am \
install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-aminfo \
clean-bfdlibLTLIBRARIES clean-cscope clean-generic \
clean-libtool clean-noinstLTLIBRARIES cscope cscopelist-am \
ctags ctags-am dist-info distclean distclean-compile \
distclean-generic distclean-hdr distclean-libtool \
distclean-tags dvi dvi-am html html-am html-local info info-am \
install install-am install-bfdincludeHEADERS \
install-bfdlibLTLIBRARIES install-data install-data-am \
install-dvi install-dvi-am install-exec install-exec-am \
install-html install-html-am install-info install-info-am \
install-man install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs installdirs-am maintainer-clean \
maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-bfdincludeHEADERS \
uninstall-bfdlibLTLIBRARIES uninstall-dvi-am uninstall-html-am \
uninstall-info-am uninstall-pdf-am uninstall-ps-am
.PRECIOUS: Makefile
$(BFD32_LIBS) \
$(BFD64_LIBS) \
$(ALL_MACHINES) \
$(BFD32_BACKENDS) \
$(BFD64_BACKENDS) \
$(OPTIONAL_BACKENDS): $(BFD_H) $(BFD_H_DEPS) $(LOCAL_H_DEPS)
po/SRC-POTFILES.in: # Makefile
for file in $(SRC_POTFILES); do echo $$file; done \
| LC_ALL=C sort | uniq > tmp.src \
&& mv tmp.src $(srcdir)/po/SRC-POTFILES.in
po/BLD-POTFILES.in: # Makefile
for file in $(BLD_POTFILES); do echo $$file; done \
| LC_ALL=C sort | uniq > tmp.bld \
&& mv tmp.bld $(srcdir)/po/BLD-POTFILES.in
all diststuff: info
stamp-ofiles: Makefile
rm -f tofiles
f=""; \
for i in $(OFILES) ; do \
case " $$f " in \
*" $$i "*) ;; \
*) f="$$f $$i" ;; \
esac ; \
done ; \
echo $$f > tofiles
$(SHELL) $(srcdir)/../move-if-change tofiles ofiles
touch stamp-ofiles
ofiles: stamp-ofiles ; @true
# This file holds an array associating configuration triplets and
# vector names. It is built from config.bfd. It is not compiled by
# itself, but is included by targets.c.
targmatch.h: config.bfd targmatch.sed
$(AM_V_at)rm -f targmatch.new
$(AM_V_GEN)$(SED) -f $(srcdir)/targmatch.sed < $(srcdir)/config.bfd > targmatch.new
$(AM_V_at)mv -f targmatch.new targmatch.h
# When compiling archures.c and targets.c, supply the default target
# info from configure.
targets.lo: targets.c Makefile
$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
$(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
# source='targets.c' object='$@' libtool=yes \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(AM_V_CC)$(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
archures.lo: archures.c Makefile
$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
$(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
# source='archures.c' object='$@' libtool=yes \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(AM_V_CC)$(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
dwarf2.lo: dwarf2.c Makefile
$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
$(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
# source='dwarf2.c' object='$@' libtool=yes \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(AM_V_CC)$(LTCOMPILE) -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
elf32-target.h : elfxx-target.h
$(AM_V_GEN)$(SED) -e s/NN/32/g < $< > $@
elf64-target.h : elfxx-target.h
$(AM_V_GEN)$(SED) -e s/NN/64/g < $< > $@
elf32-aarch64.c : elfnn-aarch64.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-aarch64.c : elfnn-aarch64.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-ia64.c : elfnn-ia64.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-ia64.c : elfnn-ia64.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-kvx.c : elfnn-kvx.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-kvx.c : elfnn-kvx.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-loongarch.c : elfnn-loongarch.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-loongarch.c : elfnn-loongarch.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-riscv.c : elfnn-riscv.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-riscv.c : elfnn-riscv.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
peigen.c : peXXigen.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/XX/pe/g < $< >> $@
pepigen.c : peXXigen.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/XX/pep/g < $< >> $@
pex64igen.c: peXXigen.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/XX/pex64/g < $< >> $@
pe-aarch64igen.c: peXXigen.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/XX/peAArch64/g < $< >> $@
pe-loongarch64igen.c: peXXigen.c
$(AM_V_at)echo "#line 1 \"$<\"" > $@
$(AM_V_GEN)$(SED) -e s/XX/peLoongArch64/g < $< >> $@
pe-riscv64igen.c: peXXigen.c
$(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
$(AM_V_GEN)$(SED) -e s/XX/peRiscV64/g < $< >> $@
host-aout.lo: Makefile
# The following program can be used to generate a simple config file
# which can be folded into an h-XXX file for a new host, with some editing.
aout-params.h: gen-aout
./gen-aout host > aout-params.h
gen-aout: $(srcdir)/gen-aout.c Makefile
$(CC) -o gen-aout $(CFLAGS) $(LFLAGS) $(srcdir)/gen-aout.c
$(BFD_H): stmp-bfd-h ; @true
stmp-bfd-h: bfd-in3.h
rm -f bfd-tmp.h
cp bfd-in3.h bfd-tmp.h
$(SHELL) $(srcdir)/../move-if-change bfd-tmp.h $(BFD_H)
rm -f bfd-tmp.h
touch stmp-bfd-h
headers: stmp-bin2-h stmp-lbfd-h stmp-lcoff-h
$(srcdir)/bfd-in2.h: # stmp-bin2-h ; @true
stmp-bin2-h: $(BFD_H_FILES) $(BFD64_H_FILES) $(MKDOC)
$(AM_V_GEN)H_FILES="$(BFD_H_FILES)" CHEW_FLAGS= ; $(REGEN_HEADER) > bfd-in2.h-new
$(AM_V_at)$(SHELL) $(srcdir)/../move-if-change bfd-in2.h-new $(srcdir)/bfd-in2.h
$(AM_V_at)touch stmp-bin2-h
$(srcdir)/libbfd.h: # stmp-lbfd-h ; @true
stmp-lbfd-h: $(LIBBFD_H_FILES) $(MKDOC)
$(AM_V_GEN)H_FILES="$(LIBBFD_H_FILES)" CHEW_FLAGS=-i ; $(REGEN_HEADER) > libbfd.h-new
$(AM_V_at)$(SHELL) $(srcdir)/../move-if-change libbfd.h-new $(srcdir)/libbfd.h
$(AM_V_at)touch stmp-lbfd-h
$(srcdir)/libcoff.h: # stmp-lcoff-h ; @true
stmp-lcoff-h: $(LIBCOFF_H_FILES) $(MKDOC)
$(AM_V_GEN)H_FILES="$(LIBCOFF_H_FILES)" CHEW_FLAGS=-i ; $(REGEN_HEADER) > libcoff.h-new
$(AM_V_at)$(SHELL) $(srcdir)/../move-if-change libcoff.h-new $(srcdir)/libcoff.h
$(AM_V_at)touch stmp-lcoff-h
bfdver.h: $(srcdir)/version.h $(srcdir)/development.sh $(srcdir)/Makefile.in
$(AM_V_GEN)\
bfd_version=`echo "$(VERSION)" | $(SED) -e 's/\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\).*/\1.00\2.00\3.00\4.00\5/' -e 's/\([^\.]*\)\..*\(..\)\..*\(..\)\..*\(..\)\..*\(..\)$$/\1\2\3\4\5/'` ;\
bfd_version_string="\"$(VERSION)\"" ;\
bfd_soversion="$(VERSION)" ;\
bfd_version_package="\"$(PKGVERSION)\"" ;\
report_bugs_to="\"$(REPORT_BUGS_TO)\"" ;\
. $(srcdir)/development.sh ;\
if test "$$development" = true ; then \
bfd_version_date=`$(SED) -n -e 's/.*DATE //p' < $(srcdir)/version.h` ;\
bfd_version_string="\"$(VERSION).$${bfd_version_date}\"" ;\
bfd_soversion="$(VERSION).$${bfd_version_date}" ;\
fi ;\
$(SED) -e "s,@bfd_version@,$$bfd_version," \
-e "s,@bfd_version_string@,$$bfd_version_string," \
-e "s,@bfd_version_package@,$$bfd_version_package," \
-e "s,@report_bugs_to@,$$report_bugs_to," \
< $(srcdir)/version.h > $@; \
echo "$${bfd_soversion}" > libtool-soversion
# Disable -Werror, if it has been enabled, since coffswap.h won't
# compile with gcc 4.5 and above.
coff-tic4x.lo: coff-tic4x.c
$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
# source='$<' object='$@' libtool=yes \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(AM_V_CC)$(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
coff-tic54x.lo: coff-tic54x.c
$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
# source='$<' object='$@' libtool=yes \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(AM_V_CC)$(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
$(MKDOC): doc/chew.stamp ; @true
doc/chew.stamp: $(srcdir)/doc/chew.c doc/$(am__dirstamp)
+ $(AM_V_CCLD)$(CC_FOR_BUILD) -o doc/chw$$$$$(EXEEXT_FOR_BUILD) $(CFLAGS_FOR_BUILD) \
$(CPPFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) \
-I. -I$(srcdir) -Idoc -I$(srcdir)/../include -I$(srcdir)/../intl -I../intl \
$(srcdir)/doc/chew.c && \
$(SHELL) $(srcdir)/../move-if-change \
doc/chw$$$$$(EXEEXT_FOR_BUILD) $(MKDOC) && \
touch $@
.PRECIOUS: doc/%.stamp
doc/%.texi: doc/%.stamp ; @true
doc/%.stamp: $(srcdir)/%.c $(srcdir)/doc/doc.str $(MKDOC) doc/$(am__dirstamp)
$(AM_V_GEN)$(REGEN_TEXI)
doc/%.stamp: $(srcdir)/%.h $(srcdir)/doc/doc.str $(MKDOC) doc/$(am__dirstamp)
$(AM_V_GEN)$(REGEN_TEXI)
# Avoid the %.stamp generating a builddir/bfd.texi that overrides the
# srcdir/ as well as regenerating doc/bfd.info for each make run.
doc/bfd.stamp: $(srcdir)/doc/bfd.texi ; $(AM_V_at)touch $@
# We use bfdt.texi, rather than bfd.texi, to avoid conflicting with
# bfd.texi on an 8.3 filesystem.
doc/bfdt.stamp: $(srcdir)/bfd.c $(srcdir)/doc/doc.str $(MKDOC) doc/$(am__dirstamp)
$(AM_V_GEN)$(REGEN_TEXI)
doc/bfdver.texi: $(srcdir)/Makefile.in
$(AM_V_GEN)\
$(MKDIR_P) $(@D); \
echo "@set VERSION $(VERSION)" > $@; \
if test -n "$(PKGVERSION)"; then \
echo "@set VERSION_PACKAGE $(PKGVERSION)" >> $@; \
fi; \
echo "@set UPDATED `date '+%B %Y'`" >> $@; \
if test -n "$(REPORT_BUGS_TEXI)"; then \
echo "@set BUGURL $(REPORT_BUGS_TEXI)" >> $@; \
fi
html-local: doc/bfd/index.html
doc/bfd/index.html: doc/bfd.texi $(bfd_TEXINFOS) doc/$(am__dirstamp)
$(AM_V_at)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
--split=node -o doc/bfd $(srcdir)/doc/bfd.texi
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: