// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca953x.dtsi" #include #include #include / { compatible = "comfast,cf-wr752ac-v1", "qca,qca9531"; model = "COMFAST CF-WR752AC v1"; aliases { serial0 = &uart; led-boot = &led_lan; led-failsafe = &led_lan; led-upgrade = &led_lan; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&jtag_disable_pins &pinmux_led_rssihigh &pinmux_led_rssilow>; led_lan: lan { function = LED_FUNCTION_LAN; color = ; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; rssihigh { label = "green:rssihigh"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; rssilow { label = "red:rssilow"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; button { label = "reset"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; }; &pinmux { pinmux_led_rssihigh: pinmux_led_rssihigh { pinctrl-single,bits = <0xc 0x0 0xff000000>; }; pinmux_led_rssilow: pinmux_led_rssilow { pinctrl-single,bits = <0x8 0x0 0xff000000>; }; }; &pcie0 { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&precal_art_5000>, <&macaddr_art_0 2>; nvmem-cell-names = "pre-calibration", "mac-address"; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x010000>; read-only; }; art: partition@10000 { label = "art"; reg = <0x010000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_art_0: macaddr@0 { compatible = "mac-base"; reg = <0x0 0x6>; #nvmem-cell-cells = <1>; }; cal_art_1000: calibration@1000 { reg = <0x1000 0x440>; }; precal_art_5000: pre-calibration@5000 { reg = <0x5000 0x2f20>; }; }; }; partition@20000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x020000 0xfd0000>; }; partition@ff0000 { label = "nvram"; reg = <0xff0000 0x010000>; read-only; }; }; }; }; ð0 { status = "okay"; phy-handle = <&swphy4>; nvmem-cells = <&macaddr_art_0 0>; nvmem-cell-names = "mac-address"; }; ð1 { compatible = "syscon", "simple-mfd"; }; &wmac { status = "okay"; nvmem-cells = <&macaddr_art_0 10>, <&cal_art_1000>; nvmem-cell-names = "mac-address", "calibration"; };