From 14b38bd5e9efc917149299e5a7e3cd92bcc30fd9 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Wed, 17 Apr 2024 15:55:05 +0100 Subject: [PATCH 1035/1085] dts: bcm2712: cm5: There is no card detect signal Delete the reference to the EMMC/SD card detect signal because the pin is used for ANT1 on CM5. Signed-off-by: Phil Elwell --- arch/arm/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) --- a/arch/arm/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi @@ -344,7 +344,7 @@ dpi_16bit_gpio2: &rp1_dpi_16bit_g /* SDIO1 is used to drive the eMMC/SD card */ &sdio1 { - pinctrl-0 = <&emmc_cmddat_pulls>, <&emmc_ds_pull>, <&emmc_aon_cd_pins>; + pinctrl-0 = <&emmc_cmddat_pulls>, <&emmc_ds_pull>; pinctrl-names = "default"; vqmmc-supply = <&sd_io_1v8_reg>; vmmc-supply = <&sd_vcc_reg>; @@ -360,10 +360,6 @@ dpi_16bit_gpio2: &rp1_dpi_16bit_g }; &pinctrl_aon { - emmc_aon_cd_pins: emmc_aon_cd_pins { - function = "sd_card_g"; - pins = "aon_gpio5"; - bias-pull-up; }; /* Slight hack - only one PWM pin (status LED) is usable */