// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7620n.dtsi" #include #include #include / { compatible = "snr,cpe-w4n-mt", "ralink,mt7620n-soc"; model = "SNR-CPE-W4N (rev.M)"; aliases { led-boot = &led_wps; led-failsafe = &led_sys; led-running = &led_wps; led-upgrade = &led_sys; }; leds { compatible = "gpio-leds"; led_sys: sys { color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; // GPIO#38 panic-indicator; }; led_wps: wps { color = ; function = LED_FUNCTION_WPS; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; // GPIO#39 }; wlan { color = ; function = LED_FUNCTION_WLAN; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; // GPIO#72 }; }; keys { compatible = "gpio-keys"; reset { label = "Reset Button"; gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; // GPIO#1 linux,code = ; }; }; }; &gpio0 { status = "okay"; }; &gpio1 { status = "okay"; }; &gpio3 { status = "okay"; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <48000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "Bootloader"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "Config"; reg = <0x30000 0x10000>; }; partition@40000 { label = "Factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x200>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x7b0000>; }; partition@30000_1 { label = "uboot-env"; reg = <0x30000 0x1000>; }; }; }; }; &state_default { gpio { groups = "i2c", "spi refclk"; function = "gpio"; }; }; &wmac { nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; };