// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include #include / { compatible = "keenetic,kn-3510", "mediatek,mt7621-soc"; model = "Keenetic KN-3510"; aliases { led-boot = &led_status_green; led-failsafe = &led_status_green; led-running = &led_status_green; led-upgrade = &led_status_green; label-mac-device = &gmac0; }; chosen { bootargs = "console=ttyS0,115200"; }; leds { compatible = "gpio-leds"; led-0 { function = LED_FUNCTION_WPS; color = ; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; led_status_green: led-1 { function = LED_FUNCTION_STATUS; color = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 6 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; linux,code = ; }; fn1 { label = "fn1"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; linux,code = ; }; }; virtual_flash { compatible = "mtd-concat"; devices = <&firmware1 &storage1 &firmware2 &storage2>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; reg = <0x0 0x400000>; }; partition@400000 { label = "ubi"; reg = <0x400000 0x0>; }; }; }; }; &state_default { gpio { groups = "uart3", "jtag"; function = "gpio"; }; }; &nand { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x80000>; read-only; }; partition@80000 { label = "u-config"; reg = <0x80000 0x80000>; read-only; }; partition@100000 { label = "rf-eeprom"; reg = <0x100000 0x80000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0xe00>; }; macaddr_factory_4: macaddr@4 { reg = <0x4 0x6>; }; macaddr_factory_a: macaddr@a { reg = <0xa 0x6>; }; precal_factory_e10: precal@e10 { reg = <0xe10 0x19c10>; }; }; }; firmware1: partition@180000 { label = "firmware_1"; reg = <0x180000 0x1a40000>; }; partition@1bc0000 { label = "config_1"; reg = <0x1bc0000 0x20000>; read-only; }; partition@1dc0000 { label = "storage_legacy"; reg = <0x1dc0000 0x20000>; read-only; }; partition@1fc0000 { label = "dump"; reg = <0x1fc0000 0x40000>; read-only; }; storage1: partition@2000000 { label = "storage_a"; reg = <0x2000000 0x1fc0000>; }; partition@3fc0000 { label = "u-state"; reg = <0x3fc0000 0x80000>; read-only; }; partition@4040000 { label = "u-config_res"; reg = <0x4040000 0x80000>; read-only; }; partition@40c0000 { label = "rf-eeprom_res"; reg = <0x40c0000 0x80000>; read-only; }; firmware2: partition@4140000 { label = "firmware_2"; reg = <0x4140000 0x1a40000>; }; partition@5b80000 { label = "config_2"; reg = <0x5d00000 0x20000>; read-only; }; storage2: partition@5d80000 { label = "storage_b"; reg = <0x5d80000 0x2200000>; }; }; }; ðphy0 { /delete-property/ interrupts; }; &gmac0 { nvmem-cells = <&macaddr_factory_4>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy0>; nvmem-cells = <&macaddr_factory_a>; nvmem-cell-names = "mac-address"; }; &switch0 { ports { port@3 { status = "okay"; label = "lan"; }; }; }; &pcie { status = "okay"; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>; nvmem-cell-names = "eeprom", "precal"; mediatek,disable-radar-background; }; }; &xhci { status = "disabled"; };