// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7621_mikrotik_routerboard-7xx.dtsi"

/ {
	compatible = "mikrotik,routerboard-760igs", "mediatek,mt7621-soc";
	model = "MikroTik RouterBOARD 760iGS (hEX S)";

	aliases {
		led-boot = &led_pwr;
		led-failsafe = &led_pwr;
		led-running = &led_pwr;
		led-upgrade = &led_pwr;
		label-mac-device = &port0;
	};

	leds {
		compatible = "gpio-leds";

		led_pwr: pwr {
			label = "blue:pwr";
			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
			default-state = "on";
		};

		sfp {
			label = "blue:sfp";
			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
		};
	};

	sfp1: sfp1 {
		compatible = "sff,sfp";
		i2c-bus = <&i2c>;
		los-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
		mod-def0-gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
		tx-disable-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
		maximum-power-milliwatt = <1000>;
	};
};

&mdio {
	ephy7: ethernet-phy@7 {
		reg = <7>;
		sfp = <&sfp1>;
	};
};

&gmac1 {
	status = "okay";

	label = "sfp";
	phy-mode = "rgmii-rxid";
	phy-handle = <&ephy7>;

	nvmem-cells = <&macaddr_hard 5>;
	nvmem-cell-names = "mac-address";
};

&i2c {
	status = "okay";
};

&state_default {
	gpio {
		/* gpio7 (uart3 group) goes high when
		 * port5 (PoE out) is cabled to a
		 * Mikrotik PoE-in capable port,
		 * such as port1 on another rb760iGS */
		groups = "uart2", "uart3", "jtag", "wdt";
		function = "gpio";
	};
};