// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	compatible = "netis,n6", "mediatek,mt7621-soc";
	model = "netis N6";

	aliases {
		label-mac-device = &gmac0;

		led-boot = &led_power_green;
		led-failsafe = &led_system_green;
		led-running = &led_power_green;
		led-upgrade = &led_system_green;
	};

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	keys {
		compatible = "gpio-keys";

		key-0 {
			label = "wps";
			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
			debounce-interval = <60>;
		};

		key-1 {
			label = "reset";
			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
			debounce-interval = <60>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led-0 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_USB;
			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
			trigger-sources = <&xhci_ehci_port1>;
			linux,default-trigger = "usbport";
		};

		led-1 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_WPS;
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
		};

		led_system_green: led-2 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_INDICATOR;
			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
		};

		led-3 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_WAN;
			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
		};

		led_power_green: led-4 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_POWER;
			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
		};
	};
};

&gmac0 {
	nvmem-cells = <&macaddr_factory_7ef20 0>;
	nvmem-cell-names = "mac-address";
};

&gmac1 {
	status = "okay";
	label = "wan";
	phy-handle = <&ethphy4>;

	nvmem-cells = <&macaddr_factory_7ef26 0>;
	nvmem-cell-names = "mac-address";
};

&ethphy4 {
	/delete-property/ interrupts;
};

&nand {
	status = "okay";

	mediatek,nmbm;
	mediatek,bmt-remap-range = <0x000000 0x580000>;

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x80000>;
			read-only;
		};

		partition@80000 {
			label = "Config";
			reg = <0x80000 0x80000>;
		};

		partition@100000 {
			label = "Factory";
			reg = <0x100000 0x80000>;
			read-only;

			nvmem-layout {
				compatible = "fixed-layout";
				#address-cells = <1>;
				#size-cells = <1>;

				eeprom_factory_0: eeprom@0 {
					reg = <0x0 0xe00>;
				};

				macaddr_factory_7ef20: macaddr@7ef20 {
					reg = <0x7ef20 0x6>;
				};

				macaddr_factory_7ef26: macaddr@7ef26 {
					reg = <0x7ef26 0x6>;
				};
			};
		};

		partition@180000 {
			label = "firmware";
			reg = <0x180000 0x7680000>;

			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "kernel";
				reg = <0x0 0x400000>;
			};

			partition@400000 {
				label = "ubi";
				reg = <0x400000 0x7280000>;
			};
		};
	};
};

&pcie {
	status = "okay";
};

&pcie1 {
	wifi@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;

		/*
		 * *** The code block below is commented out ***
		 * Reason: Probably, original Netis N6 EEPROM has wrong
		 *         MT_EE_WIFI_CONF value 0xd2. As a result 2.4 GHz
		 *         doesn't start with mt76 driver. Other routers
		 *         with the same WLAN chips (e.g., Routerich
		 *         AX1800) have  MT_EE_WIFI_CONF = 0x92.
		 * Workaround: Extract EEPROM to a file at the first time
		 *             boot and change MT_EE_WIFI_CONF (offset
		 *             0x190) value from 0xd2 to 0x92. See
		 *             /etc/hotplug.d/firmware/11-mt76-caldata for
		 *             details.
		 */

		/*
		nvmem-cells = <&eeprom_factory_0>;
		nvmem-cell-names = "eeprom";
		*/

		mediatek,disable-radar-background;
	};
};

&state_default {
	gpio {
		groups =  "i2c", "jtag", "wdt";
		function = "gpio";
	};
};

&switch0 {
	ports {
		port@0 {
			status = "okay";
			label = "lan4";
		};

		port@1 {
			status = "okay";
			label = "lan3";
		};

		port@2 {
			status = "okay";
			label = "lan2";
		};

		port@3 {
			status = "okay";
			label = "lan1";
		};
	};
};