// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include #include / { aliases { label-mac-device = &gmac0; led-boot = &led_status_green; led-failsafe = &led_status_red; led-running = &led_status_green; led-upgrade = &led_status_red; }; leds { compatible = "gpio-leds"; led-0 { color = ; function = LED_FUNCTION_WAN; gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; }; led_status_green: led-1 { color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; }; led_status_red: led-2 { color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; }; }; keys { compatible = "gpio-keys"; button-0 { label = "wps"; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; linux,code = ; }; button-1 { label = "reset"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; linux,code = ; }; }; ubi-concat { compatible = "mtd-concat"; devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2 \ &ubiconcat3>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "ubi"; reg = <0x0 0xca00000>; }; }; }; }; &nand { status = "okay"; partitions { compatible = "sercomm,sc-partitions", "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x100000>; sercomm,scpart-id = <0>; read-only; }; partition@100000 { label = "dynamic partition map"; reg = <0x100000 0x100000>; sercomm,scpart-id = <1>; read-only; }; partition@200000 { label = "Factory"; reg = <0x200000 0x100000>; sercomm,scpart-id = <2>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x4da8>; }; macaddr_factory_21000: macaddr@21000 { compatible = "mac-base"; reg = <0x21000 0x6>; #nvmem-cell-cells = <1>; }; }; }; partition@300000 { label = "Boot Flag"; reg = <0x300000 0x100000>; sercomm,scpart-id = <3>; }; partition@400000 { label = "kernel"; reg = <0x400000 0x600000>; sercomm,scpart-id = <4>; }; partition@a00000 { label = "Kernel 2"; reg = <0xa00000 0x600000>; sercomm,scpart-id = <5>; read-only; }; ubiconcat0: partition@1000000 { label = "File System 1"; reg = <0x1000000 0x2000000>; sercomm,scpart-id = <6>; }; partition@3000000 { label = "File System 2"; reg = <0x3000000 0x2000000>; sercomm,scpart-id = <7>; read-only; }; ubiconcat1: partition@5000000 { label = "Configuration/log"; reg = <0x5000000 0x1400000>; sercomm,scpart-id = <8>; }; ubiconcat2: partition@6400000 { label = "Debug (Ftool)"; reg = <0x6400000 0x1a00000>; sercomm,scpart-id = <9>; }; ubiconcat3: partition@8000000 { label = "Container"; reg = <0x8000000 0x7c00000>; sercomm,scpart-id = <10>; }; }; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; ieee80211-freq-limit = <5000000 6000000>; }; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; ieee80211-freq-limit = <2400000 2500000>; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_21000 0>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy0>; }; ðphy0 { /delete-property/ interrupts; }; &switch0 { ports { port@1 { status = "okay"; label = "lan1"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan3"; }; port@4 { status = "okay"; label = "lan4"; }; }; }; &uartlite3 { status = "okay"; }; &state_default { gpio { groups = "jtag", "uart2"; function = "gpio"; }; };