// SPDX-License-Identifier: BSD-3-Clause /* * Qualcomm SPMI bus driver * * (C) Copyright 2015 Mateusz Kulikowski * * Loosely based on Little Kernel driver */ #include #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; /* PMIC Arbiter configuration registers */ #define PMIC_ARB_VERSION 0x0000 #define PMIC_ARB_VERSION_V2_MIN 0x20010000 #define PMIC_ARB_VERSION_V3_MIN 0x30000000 #define PMIC_ARB_VERSION_V5_MIN 0x50000000 #define PMIC_ARB_VERSION_V7_MIN 0x70000000 #define APID_MAP_OFFSET_V1_V2_V3 (0x800) #define APID_MAP_OFFSET_V5 (0x900) #define APID_MAP_OFFSET_V7 (0x2000) #define ARB_CHANNEL_OFFSET(n) (0x4 * (n)) #define SPMI_CH_OFFSET(chnl) ((chnl) * 0x8000) #define SPMI_V5_OBS_CH_OFFSET(chnl) ((chnl) * 0x80) #define SPMI_V7_OBS_CH_OFFSET(chnl) ((chnl) * 0x20) #define SPMI_V5_RW_CH_OFFSET(chnl) ((chnl) * 0x10000) #define SPMI_V7_RW_CH_OFFSET(chnl) ((chnl) * 0x1000) #define SPMI_OWNERSHIP_PERIPH2OWNER(x) ((x) & 0x7) #define SPMI_REG_CMD0 0x0 #define SPMI_REG_CONFIG 0x4 #define SPMI_REG_STATUS 0x8 #define SPMI_REG_WDATA 0x10 #define SPMI_REG_RDATA 0x18 #define SPMI_CMD_OPCODE_SHIFT 27 #define SPMI_CMD_SLAVE_ID_SHIFT 20 #define SPMI_CMD_ADDR_SHIFT 12 #define SPMI_CMD_ADDR_OFFSET_SHIFT 4 #define SPMI_CMD_BYTE_CNT_SHIFT 0 #define SPMI_CMD_EXT_REG_WRITE_LONG 0x00 #define SPMI_CMD_EXT_REG_READ_LONG 0x01 #define SPMI_STATUS_DONE 0x1 #define SPMI_MAX_CHANNELS 128 #define SPMI_MAX_CHANNELS_V5 512 #define SPMI_MAX_CHANNELS_V7 1024 #define SPMI_MAX_SLAVES 16 #define SPMI_MAX_PERIPH 256 #define SPMI_CHANNEL_READ_ONLY BIT(31) #define SPMI_CHANNEL_MASK 0xffff enum arb_ver { V1 = 1, V2, V3, V5 = 5, V7 = 7 }; /* * PMIC arbiter version 5 uses different register offsets for read/write vs * observer channels. */ enum pmic_arb_channel { PMIC_ARB_CHANNEL_RW, PMIC_ARB_CHANNEL_OBS, }; struct msm_spmi_priv { phys_addr_t arb_chnl; /* ARB channel mapping base */ phys_addr_t spmi_chnls; /* SPMI channels */ phys_addr_t spmi_obs; /* SPMI observer */ phys_addr_t spmi_cnfg; /* SPMI config */ u32 owner; /* Current owner */ unsigned int max_channels; /* Max channels */ /* SPMI channel map */ uint32_t channel_map[SPMI_MAX_SLAVES][SPMI_MAX_PERIPH]; /* SPMI bus arbiter version */ u32 arb_ver; }; static u32 pmic_arb_fmt_cmd_v1(u8 opc, u8 sid, u8 pid, u8 off) { return (opc << 27) | (sid << 20) | (pid << 12) | (off << 4) | 1; } static u32 pmic_arb_fmt_cmd_v2(u8 opc, u8 off) { return (opc << 27) | (off << 4) | 1; } static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off, uint8_t val) { struct msm_spmi_priv *priv = dev_get_priv(dev); unsigned channel; unsigned int ch_offset; uint32_t reg = 0; if (usid >= SPMI_MAX_SLAVES) return -EIO; if (pid >= SPMI_MAX_PERIPH) return -EIO; if (priv->channel_map[usid][pid] & SPMI_CHANNEL_READ_ONLY) return -EPERM; channel = priv->channel_map[usid][pid] & SPMI_CHANNEL_MASK; dev_dbg(dev, "[%d:%d] %s: channel %d\n", usid, pid, __func__, channel); switch (priv->arb_ver) { case V1: ch_offset = SPMI_CH_OFFSET(channel); reg = pmic_arb_fmt_cmd_v1(SPMI_CMD_EXT_REG_WRITE_LONG, usid, pid, off); break; case V2: ch_offset = SPMI_CH_OFFSET(channel); reg = pmic_arb_fmt_cmd_v2(SPMI_CMD_EXT_REG_WRITE_LONG, off); break; case V5: ch_offset = SPMI_V5_RW_CH_OFFSET(channel); reg = pmic_arb_fmt_cmd_v2(SPMI_CMD_EXT_REG_WRITE_LONG, off); break; case V7: ch_offset = SPMI_V7_RW_CH_OFFSET(channel); reg = pmic_arb_fmt_cmd_v2(SPMI_CMD_EXT_REG_WRITE_LONG, off); break; } /* Disable IRQ mode for the current channel*/ writel(0x0, priv->spmi_chnls + ch_offset + SPMI_REG_CONFIG); /* Write single byte */ writel(val, priv->spmi_chnls + ch_offset + SPMI_REG_WDATA); /* Send write command */ writel(reg, priv->spmi_chnls + ch_offset + SPMI_REG_CMD0); /* Wait till CMD DONE status */ reg = 0; while (!reg) { reg = readl(priv->spmi_chnls + ch_offset + SPMI_REG_STATUS); } if (reg ^ SPMI_STATUS_DONE) { printf("SPMI write failure.\n"); return -EIO; } return 0; } static int msm_spmi_read(struct udevice *dev, int usid, int pid, int off) { struct msm_spmi_priv *priv = dev_get_priv(dev); unsigned channel; unsigned int ch_offset; uint32_t reg = 0; if (usid >= SPMI_MAX_SLAVES) return -EIO; if (pid >= SPMI_MAX_PERIPH) return -EIO; channel = priv->channel_map[usid][pid] & SPMI_CHANNEL_MASK; dev_dbg(dev, "[%d:%d] %s: channel %d\n", usid, pid, __func__, channel); switch (priv->arb_ver) { case V1: ch_offset = SPMI_CH_OFFSET(channel); /* Prepare read command */ reg = pmic_arb_fmt_cmd_v1(SPMI_CMD_EXT_REG_READ_LONG, usid, pid, off); break; case V2: ch_offset = SPMI_CH_OFFSET(channel); /* Prepare read command */ reg = pmic_arb_fmt_cmd_v2(SPMI_CMD_EXT_REG_READ_LONG, off); break; case V5: ch_offset = SPMI_V5_OBS_CH_OFFSET(channel); /* Prepare read command */ reg = pmic_arb_fmt_cmd_v2(SPMI_CMD_EXT_REG_READ_LONG, off); break; case V7: ch_offset = SPMI_V7_OBS_CH_OFFSET(channel); /* Prepare read command */ reg = pmic_arb_fmt_cmd_v2(SPMI_CMD_EXT_REG_READ_LONG, off); break; } /* Disable IRQ mode for the current channel*/ writel(0x0, priv->spmi_obs + ch_offset + SPMI_REG_CONFIG); /* Request read */ writel(reg, priv->spmi_obs + ch_offset + SPMI_REG_CMD0); /* Wait till CMD DONE status */ reg = 0; while (!reg) { reg = readl(priv->spmi_obs + ch_offset + SPMI_REG_STATUS); } if (reg ^ SPMI_STATUS_DONE) { printf("SPMI read failure.\n"); return -EIO; } /* Read the data */ return readl(priv->spmi_obs + ch_offset + SPMI_REG_RDATA) & 0xFF; } static struct dm_spmi_ops msm_spmi_ops = { .read = msm_spmi_read, .write = msm_spmi_write, }; static int msm_spmi_probe(struct udevice *dev) { struct msm_spmi_priv *priv = dev_get_priv(dev); phys_addr_t core_addr; u32 hw_ver; int i; core_addr = dev_read_addr_name(dev, "core"); priv->spmi_chnls = dev_read_addr_name(dev, "chnls"); priv->spmi_obs = dev_read_addr_name(dev, "obsrvr"); dev_read_u32(dev, "qcom,ee", &priv->owner); hw_ver = readl(core_addr + PMIC_ARB_VERSION); if (hw_ver < PMIC_ARB_VERSION_V3_MIN) { priv->arb_ver = V2; priv->arb_chnl = core_addr + APID_MAP_OFFSET_V1_V2_V3; priv->max_channels = SPMI_MAX_CHANNELS; } else if (hw_ver < PMIC_ARB_VERSION_V5_MIN) { priv->arb_ver = V3; priv->arb_chnl = core_addr + APID_MAP_OFFSET_V1_V2_V3; priv->max_channels = SPMI_MAX_CHANNELS; } else if (hw_ver < PMIC_ARB_VERSION_V7_MIN) { priv->arb_ver = V5; priv->arb_chnl = core_addr + APID_MAP_OFFSET_V5; priv->max_channels = SPMI_MAX_CHANNELS; priv->spmi_cnfg = dev_read_addr_name(dev, "cnfg"); } else { /* TOFIX: handle second bus */ priv->arb_ver = V7; priv->arb_chnl = core_addr + APID_MAP_OFFSET_V7; priv->max_channels = SPMI_MAX_CHANNELS_V7; priv->spmi_cnfg = dev_read_addr_name(dev, "cnfg"); } dev_dbg(dev, "PMIC Arb Version-%d (%#x)\n", hw_ver >> 28, hw_ver); if (priv->arb_chnl == FDT_ADDR_T_NONE || priv->spmi_chnls == FDT_ADDR_T_NONE || priv->spmi_obs == FDT_ADDR_T_NONE) return -EINVAL; dev_dbg(dev, "priv->arb_chnl address (%#08llx)\n", priv->arb_chnl); dev_dbg(dev, "priv->spmi_chnls address (%#08llx)\n", priv->spmi_chnls); dev_dbg(dev, "priv->spmi_obs address (%#08llx)\n", priv->spmi_obs); /* Scan peripherals connected to each SPMI channel */ for (i = 0; i < priv->max_channels; i++) { uint32_t periph = readl(priv->arb_chnl + ARB_CHANNEL_OFFSET(i)); uint8_t slave_id = (periph & 0xf0000) >> 16; uint8_t pid = (periph & 0xff00) >> 8; priv->channel_map[slave_id][pid] = i; /* Mark channels read-only when from different owner */ if (priv->arb_ver == V5 || priv->arb_ver == V7) { uint32_t cnfg = readl(priv->spmi_cnfg + ARB_CHANNEL_OFFSET(i)); uint8_t owner = SPMI_OWNERSHIP_PERIPH2OWNER(cnfg); if (owner != priv->owner) priv->channel_map[slave_id][pid] |= SPMI_CHANNEL_READ_ONLY; } } return 0; } static const struct udevice_id msm_spmi_ids[] = { { .compatible = "qcom,spmi-pmic-arb" }, { } }; U_BOOT_DRIVER(msm_spmi) = { .name = "msm_spmi", .id = UCLASS_SPMI, .of_match = msm_spmi_ids, .ops = &msm_spmi_ops, .probe = msm_spmi_probe, .priv_auto = sizeof(struct msm_spmi_priv), };