This section describes specifics for the Python packages that are present in this repo, and how things are structured.
In terms of license, contributing guide, etc, all of that information is described in the top README.md file, and it applies here as well. This document attempts to cover only technical aspects of Python packages, and maybe some explanations about how things are (and why they are as they are).
This sub-tree came to exist after a number of contributions (Python packages) were made to this repo, and the lang subtree grew to a point where a decision was made to move all Python packages under lang/python.
It contains the Python 3 interpreter and Python packages. Most of the Python packages are downloaded from pypi.org. Python packages from pypi.org are typically preferred when adding new packages.
If more packages (than the ones packaged here) are needed, they can be downloaded via pip. Note that the versions of pip & setuptools [available in this repo] are the ones that are packaged inside the Python package (yes, Python comes packaged with pip & setuptools).
Python 2 will not be maintained past 2020. All Python 2 packages have been removed from the packages feed (this repo) and archived in the abandoned packages feed.
In the feeds.conf (or feeds.conf.default file, whatever is preferred), the packages repo should be present.
Example
src-git packages https://git.openwrt.org/feed/packages.git
src-git luci https://git.openwrt.org/project/luci.git
src-git routing https://git.openwrt.org/feed/routing.git
src-git telephony https://git.openwrt.org/feed/telephony.git
#
#
src-git someotherfeed https://github.com/<github-user>/<some-other-package>
Assuming that there are Python packages in the <some-other-package>, they should include python3-package.mk like this:
include $(TOPDIR)/feeds/packages/lang/python/python3-package.mk
Same rules apply for python3-package.mk as the Python packages in this repo.
One important consideration:: if the local name is not packages, it's something else, like openwrt-packages. And in feeds.conf[.default] it's:
src-git openwrt-packages https://git.openwrt.org/feed/packages.git
Then, the inclusions also change:
include $(TOPDIR)/feeds/openwrt-packages/lang/python/python3-package.mk
Each maintainer[s] of external packages feeds is responsible for the local name, and relative inclusion path back to this feed (which is named packages by default).
In case there is a need/requirement such that the local package feed is named something else than packages, one approach to make the package flexible to change is:
PYTHON3_PACKAGE_MK:=$(wildcard $(TOPDIR)/feeds/*/lang/python/python3-package.mk)
# verify that there is only one single file returned
ifneq (1,$(words $(PYTHON3_PACKAGE_MK)))
ifeq (0,$(words $(PYTHON3_PACKAGE_MK)))
$(error did not find python3-package.mk in any feed)
else
$(error found multiple python3-package.mk files in the feeds)
endif
else
$(info found python3-package.mk at $(PYTHON3_PACKAGE_MK))
endif
include $(PYTHON3_PACKAGE_MK)
This should solve the corner-case where the python3-package.mk can be in some other feed, or if the packages feed will be named something else locally.
In order to build the Python interpreter, a host Python interpreter needs to be built, in order to process some of the build for the target Python build. The host Python interpreter is also needed so that Python bytecodes are generated, so the host interpreter needs to be the exact version as on the target. And finally, the host Python interpreter also provides pip, so that it may be used to install some Python packages that are required to build other Python packages. That's why you'll also see a Python build & staging directories.
As you're probably thinking, this sounds [and is] somewhat too much complication [just for packaging], but the status of things is-as-it-is, and it's probably much worse than what's currently visible on the surface [with respect to packaging Python & packages].
As mentioned earlier, Python packages are shipped with bytecodes, and the reason for this is simply performance & size. The thought/discussion matrix derives a bit like this:
python3-src can be provided for people that want the source codeBy default, automatic Python byte-code generation is disabled when running a Python script, in order to prevent a disk from accidentally filling up. Since some disks reside in RAM, this also means not filling up the RAM. If someone wants to convert Python source to byte-code then he/she is free to compile it [directly on the device] manually via the Python interpreter & library.
The basis of all these packages is:
This is a normal OpenWrt package, which will build the Python interpreter. This also provides python3-pip & python3-setuptools. Each Python package is actually split into multiple sub-packages [e.g. python3-email, python3-sqlite3, etc]. This can be viewed inside lang/python/python3/files.
The reason for this splitting, is purely to offer a way for some people to package Python in as-minimal-as-possible-and-still-runable way, and also to be somewhat maintainable when packaging. A standard Python installation can take ~20-30 MBs of disk, which can be somewhat big for some people, so there is the python3-base package which brings that down to ~5 MBs. This seems to be good enough (and interesting) for a number of people.
The Python interpreter is structured like this:
python3-base, which is just the minimal package to startup Python and run basic commandspython3 is a meta-package, which installs almost everything (python3-base [plus] Python library [minus] some unit-tests & some windows-y things)python3-light is python3 [minus] packages that are in lang/python/python3/files ; the size of this package may be sensible (and interesting) to another group of peopleAll other Python packages (aside from the intepreter) typically use these files:
Note that Python packages don't need to use these files (i.e. python3-package.mk & python3-host.mk), but they do provide some ease-of-use & reduction of duplicate code. And they do contain some learned-lessons about packaging Python packages, so it's a good idea to use them.
Add this after include $(INCLUDE_DIR)/package.mk
include ../python3-package.mk
This will make sure that build rules for Python can be specified and picked up for build.
pypi.mk is an include file that makes downloading package source code from pypi.org simpler.
To use pypi.mk, add this before include $(INCLUDE_DIR)/package.mk:
include ../pypi.mk
pypi.mk has several PYPI_* variables that can/must be set (see below); these should be set before pypi.mk is included, i.e. before the include ../pypi.mk line.
pypi.mk also provides default values for PKG_SOURCE and PKG_SOURCE_URL, so these variables may be omitted.
Required variables:
PYPI_NAME: Package name on pypi.org. This should match the PyPI name exactly.
For example (from the python-yaml package):
PYPI_NAME:=PyYAML
Optional variables:
PYPI_SOURCE_NAME: Package name component of the source tarball filename
Default: Same value as PYPI_NAME
PYPI_SOURCE_EXT: File extension of the source tarball filename
Default: tar.gz
pypi.mk constructs the default PKG_SOURCE value from these variables (and PKG_VERSION):
PKG_SOURCE?=$(PYPI_SOURCE_NAME)-$(PKG_VERSION).$(PYPI_SOURCE_EXT)
This part is similar to default OpenWrt packages.
Example:
define Package/python3-lxml
SECTION:=lang
CATEGORY:=Languages
SUBMENU:=Python
TITLE:=Pythonic XML processing library
URL:=https://lxml.de
DEPENDS:=+python3-light +libxml2 +libxslt +libexslt
endef
define Package/python3-lxml/description
The lxml XML toolkit is a Pythonic binding
for the C libraries libxml2 and libxslt.
endef
Some considerations here (based on the example above):
Package/python3-<something> ; this convention makes things easier to follow, though it could work without naming things this wayTITLE can be something a bit more verbose/neat ; typically the name is short as seen aboveAside from other libraries and programs, every Python package will depend on at least one of these three types of packages:
The Python interpreter: All Python packages should depend on one of these three interpreter packages:
python3-light is the best default for most Python packages.
python3-base should only be used as a dependency if you are certain the bare interpreter is sufficient.
python3 is useful if many (more than three) Python standard library packages are needed.
Python standard library packages: As noted above, many parts of the Python standard library are packaged separate from the Python interpreter. These packages are defined by the files in lang/python/python3/files.
To find out which of these separate standard library packages are necessary, after completing a draft Makefile (including the $(eval ...) lines described in the next section), run make with the configure target and PY3=stdlib V=s in the command line. For example:
make package/python-lxml/configure PY3=stdlib V=s
If the package has been built previously, include the clean target to trigger configure again:
make package/python-lxml/{clean,configure} PY3=stdlib V=s
This will search the package for module imports and generate a list of suggested dependencies. Some of the found imports may be false positives, e.g. in example or test files, so examine the matches for more information.
Other Python packages: The easiest way to find these dependencies is to look for the install_requires keyword inside the package's setup.py file (it will be a keyword argument to the setup() function). This will be a list of run-time dependencies for the package.
There may already be packages in the packages feed that provide these dependencies. If not, they will need to be packaged for your Python package to function correctly.
Any packages in a setup_requires keyword argument are build-time dependencies that may need to be installed on the host (host Python inside of OpenWrt buildroot, not system Python that is part of the outer computer system). To ensure these build-time dependencies are present, see Host-side Python packages for build. (Note that Setuptools is already installed as part of host Python.)
If all the above prerequisites have been met, all that's left is:
$(eval $(call Py3Package,python3-lxml))
$(eval $(call BuildPackage,python3-lxml))
The $(eval $(call Py3Package,python3-lxml)) part will instantiate all the default Python build rules so that the final Python package is packaged into an OpenWrt.
And $(eval $(call BuildPackage,python3-lxml)) will bind all the rules generated with $(eval $(call Py3Package,python3-lxml)) into the OpenWrt build system.
These packages will contain byte-codes and binaries (shared libs & other stuff).
If a user wishes to ship source code, adding one more line creates one more package that ship Python source code:
$(eval $(call Py3Package,python3-lxml))
$(eval $(call BuildPackage,python3-lxml))
$(eval $(call BuildPackage,python3-lxml-src))
The name *-src must be the Python package name; so for python3-lxml-src a equivalent python3-lxml name must exist.
Some packages need custom build rules (because they do).
The default package build and install processes are defined in python3-package.mk.
The default build process calls setup.py install inside the directory where the Python source package is extracted (PKG_BUILD_DIR). This "installs" the Python package to an intermediate location (PKG_INSTALL_DIR) where it is used by the default install process.
There are several Makefile variables that can be used to customize this process (all optional):
PYTHON3_PKG_SETUP_DIR: Path where setup.py can be found, relative to the package directory (PKG_BUILD_DIR).setup.py is in the package directory)PYTHON3_PKG_SETUP_VARS: Additional environment variables to set for the call to setup.py. Should be in the form of VARIABLE1=value VARIABLE2=value ....PYTHON3_PKG_SETUP_GLOBAL_ARGS: Additional command line arguments to pass to setup.py, before / in front of the install command.PYTHON3_PKG_SETUP_ARGS: Additional command line arguments to pass to setup.py, after the install command.--single-version-externally-managedConceptually, these variables are used in this way:
cd $(PKG_BUILD_DIR)/$(PYTHON3_PKG_SETUP_DIR)
$(PYTHON3_PKG_SETUP_VARS) python3 setup.py $(PYTHON3_PKG_SETUP_GLOBAL_ARGS) install $(PYTHON3_PKG_SETUP_ARGS)
The default build process can be completely overridden by defining a custom Py3Build/Compile rule in the package Makefile.
The default install process copies some/all of the files from PKG_INSTALL_DIR, placed there by the build process, to a location passed to the install rule as the first argument ($(1)). The OpenWrt build system will then take those files and create the actual .ipk package archives.
This default process uses 2 build rules:
Py3Package/<package>/filespec which are Python library files relative to /usr/lib/pythonX.Y ; by default this is /usr/lib/python$(PYTHON3_VERSION)/site-packages (PYTHON3_PKG_DIR) ; most Python packages generate files that get installed in this sub-folderPy3Package/<package>/install is similar to Package/<package>/install ; this allows binary (or other files) to be installed on the targetBoth the 2 above rules generate a Package/<package>/install build rule, which gets picked up by the build system. Both can be used together (they are not mutually exclusive), and provide a good enough flexibility for specifying Python packages.
The Py3Package/<package>/filespec rule contains one or more lines of the following format (whitespace added for clarity):
<one of: +-=> | <file/directory path> | <file permissions>
The initial character controls the action that will be taken:
+: Install the given path. If the path is a directory, all files and subdirectories inside are installed.
-: Remove the given path. Useful when most of a directory should be installed except for a few files or subdirectories.
=: Assign the given file permissions to the given path. File permissions is required in this case.As mentioned, the default Py3Package/<package>/filespec installs PYTHON3_PKG_DIR:
define Py3Package/python3-example/filespec
+|$(PYTHON3_PKG_DIR)
endef
If the package installs a example_package directory inside PYTHON3_PKG_DIR, and there is an examples directory and test_*.py files that can be omitted to save space, this can be specified as:
define Py3Package/python3-example/filespec
+|$(PYTHON3_PKG_DIR)
-|$(PYTHON3_PKG_DIR)/example_package/examples
-|$(PYTHON3_PKG_DIR)/example_package/test_*.py
endef
These can be installed via pip and ideally they should only be installed like this, because it's a bit simpler than running them through the OpenWrt build system.
All host-side Python packages are installed with pip using requirements files, with hash-checking mode enabled. These requirements files are stored in the host-pip-requirements directory.
Each requirements file is named after the Python package it installs and contains the package's pinned version and --hash option. The --hash option value is the SHA256 hash of the package's source tarball; this value can be found on pypi.org.
For example, the requirements file for setuptools-scm (setuptools-scm.txt) contains:
setuptools-scm==4.1.2 --hash=sha256:a8994582e716ec690f33fec70cca0f85bd23ec974e3f783233e4879090a7faa8
If the Python package to be installed depends on other Python packages, those dependencies, with their pinned versions and --hash options, also need to be specified in the requirements file. For instance, cffi.txt includes information for pycparser because pycparser is a dependency of cffi and will be installed with cffi.
There are two types of requirements files in host-pip-requirements:
Installs the latest version of a Python package.
A requirements file of this type is named with the package name only (for example, setuptools-scm.txt) and is used when there is no strict version requirement.
These files will be updated as newer versions of the Python packages are available.
Installs a specific version of a Python package.
A requirements file of this type is named with the package name and version number (for example, Django-1.11.txt) and is used when a specific (usually older) version is required.
Installing the latest versions of packages is preferred over specific versions whenever possible.
Set HOST_PYTHON3_PACKAGE_BUILD_DEPENDS to the names of one or more requirements files in host-pip-requirements, without the directory path or ".txt" extension.
For example:
HOST_PYTHON3_PACKAGE_BUILD_DEPENDS:=setuptools-scm
The Python package will be installed in $(STAGING_DIR_HOSTPKG)/lib/pythonX.Y/site-packages.
Non-Python packages can also install host-side Python packages using the same mechanism:
Set HOST_PYTHON3_PACKAGE_BUILD_DEPENDS (see above for details).
Include python3-package.mk (set PYTHON3_PKG_BUILD:=0 to avoid using the default Python package build recipes).
Call Py3Build/InstallBuildDepends to initiate the installation.
For example:
PYTHON3_PKG_BUILD:=0
HOST_PYTHON3_PACKAGE_BUILD_DEPENDS:=setuptools-scm
include $(INCLUDE_DIR)/package.mk
include ../../lang/python/python3-package.mk
# If outside of the packages feed:
# include $(TOPDIR)/feeds/packages/lang/python/python3-package.mk
define Build/Compile
$(call Py3Build/InstallBuildDepends)
$(call Build/Compile/Default)
endef