#!/bin/sh
# List of parameters passed through environment
#* reason                       -- why this script was called, one of: pre-init connect disconnect
#* VPNGATEWAY                   -- vpn gateway address (always present)
#* TUNDEV                       -- tunnel device (always present)
#* INTERNAL_IP4_ADDRESS         -- address (always present)
#* INTERNAL_IP4_MTU             -- mtu (often unset)
#* INTERNAL_IP4_NETMASK         -- netmask (often unset)
#* INTERNAL_IP4_NETMASKLEN      -- netmask length (often unset)
#* INTERNAL_IP4_NETADDR         -- address of network (only present if netmask is set)
#* INTERNAL_IP4_DNS             -- list of dns servers
#* INTERNAL_IP4_NBNS            -- list of wins servers
#* INTERNAL_IP6_ADDRESS         -- IPv6 address
#* INTERNAL_IP6_NETMASK         -- IPv6 netmask
#* INTERNAL_IP6_DNS             -- IPv6 list of dns servers
#* CISCO_DEF_DOMAIN             -- default domain name
#* CISCO_BANNER                 -- banner from server
#* CISCO_SPLIT_INC              -- number of networks in split-network-list
#* CISCO_SPLIT_INC_%d_ADDR      -- network address
#* CISCO_SPLIT_INC_%d_MASK      -- subnet mask (for example: 255.255.255.0)
#* CISCO_SPLIT_INC_%d_MASKLEN   -- subnet masklen (for example: 24)
#* CISCO_SPLIT_INC_%d_PROTOCOL  -- protocol (often just 0)
#* CISCO_SPLIT_INC_%d_SPORT     -- source port (often just 0)
#* CISCO_SPLIT_INC_%d_DPORT     -- destination port (often just 0)
#* CISCO_IPV6_SPLIT_INC         -- number of networks in IPv6 split-network-list
#* CISCO_IPV6_SPLIT_INC_%d_ADDR -- IPv6 network address
#* CISCO_IPV6_SPLIT_INC_$%d_MASKLEN -- IPv6 subnet masklen

HOOKS_DIR=/etc/openconnect

# FIXMEs:

# Section A: route handling

# 1) The 3 values CISCO_SPLIT_INC_%d_PROTOCOL/SPORT/DPORT are currently being ignored
#   In order to use them, we'll probably need os specific solutions
#   * Linux: iptables -t mangle -I PREROUTING <conditions> -j ROUTE --oif $TUNDEV
#       This would be an *alternative* to changing the routes (and thus 2) and 3)
#       shouldn't be relevant at all)
# 2) There are two different functions to set routes: generic routes and the
#   default route. Why isn't the defaultroute handled via the generic route case?
# 3) In the split tunnel case, all routes but the default route might get replaced
#   without getting restored later. We should explicitely check and save them just
#   like the defaultroute
# 4) Replies to a dhcp-server should never be sent into the tunnel

# Section B: Split DNS handling

# 1) We parse CISCO_SPLIT_DNS and use dnsmasq to set it

do_connect() {
	if [ -n "$CISCO_BANNER" ]; then
		logger -t openconnect "Connect Banner:"
		echo "$CISCO_BANNER" | while read LINE ; do logger -t openconnect "|" "$LINE" ; done
	fi

	proto_init_update "$TUNDEV" 1

	if [ -n "$INTERNAL_IP4_MTU" ]; then
		MTU=$INTERNAL_IP4_MTU
	fi

	if [ -z "$MTU" ]; then
		MTU=1412
	fi

	proto_add_ipv4_address "$INTERNAL_IP4_ADDRESS" 32 "" "$INTERNAL_IP4_ADDRESS"

	if [ -n "$INTERNAL_IP4_NETMASKLEN" ]; then
		proto_add_ipv4_route "$INTERNAL_IP4_NETADDR" "$INTERNAL_IP4_NETMASKLEN"
	fi

	# If the netmask is provided, it contains the address _and_ netmask
	if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then
	    INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128"
	fi

	if [ -n "$INTERNAL_IP6_NETMASK" ]; then
		addr="${INTERNAL_IP6_NETMASK%%/*}"
		mask="${INTERNAL_IP6_NETMASK##*/}"
		[[ "$addr" != "$mask" ]] && proto_add_ipv6_address "$addr" "$mask"
	fi

	DNSMASQ_FILE="/tmp/dnsmasq.d/openconnect.$TUNDEV"
	LOCAL_DOMAIN=$(uci get dhcp.@dnsmasq[0].domain)
	rm -f $DNSMASQ_FILE
	if [ -n "$CISCO_SPLIT_DNS" ] && [ -d "/tmp/dnsmasq.d/" ];then
		SDNS=`echo $CISCO_SPLIT_DNS|sed 's/,/\n/g'`
		echo "$SDNS" | while read i; do
			if [ "$i" = "$LOCAL_DOMAIN" ];then
				continue
			fi
			if [ -n "$INTERNAL_IP4_DNS" ];then
				for dns in $INTERNAL_IP4_DNS;do
					echo "server=/$i/$dns" >> $DNSMASQ_FILE
				done
			fi
			if [ -n "$INTERNAL_IP6_DNS" ];then
				for dns in $INTERNAL_IP6_DNS;do
					echo "server=/$i/$dns" >> $DNSMASQ_FILE
				done
			fi
			echo "rebind-domain-ok=$i" >> $DNSMASQ_FILE
		done
		/etc/init.d/dnsmasq restart
	else
		if [ -n "$INTERNAL_IP4_DNS" ];then
			for dns in $INTERNAL_IP4_DNS;do
				proto_add_dns_server "$dns"
			done
		fi
		if [ -n "$INTERNAL_IP6_DNS" ];then
			for dns in $INTERNAL_IP6_DNS;do
				proto_add_dns_server "$dns"
			done
		fi
		if [ -n "$CISCO_DEF_DOMAIN" ] && [ "$CISCO_DEF_DOMAIN" != "$LOCAL_DOMAIN" ];then
			if [ -n "$INTERNAL_IP4_DNS" ];then
				for dns in $INTERNAL_IP4_DNS;do
					echo "server=/$CISCO_DEF_DOMAIN/$dns" >> $DNSMASQ_FILE
				done
			fi
			if [ -n "$INTERNAL_IP6_DNS" ];then
				for dns in $INTERNAL_IP6_DNS;do
					echo "server=/$CISCO_DEF_DOMAIN/$dns" >> $DNSMASQ_FILE
				done
			fi
			proto_add_dns_search "$CISCO_DEF_DOMAIN"
		fi
	fi

	if [ -n "$CISCO_SPLIT_INC" ]; then
		i=0
		while [ $i -lt $CISCO_SPLIT_INC ] ; do
			eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}"
			eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}"
			eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}"
			if [ $NETWORK != "0.0.0.0" ]; then
				proto_add_ipv4_route "$NETWORK" "$NETMASKLEN"
			else
				proto_add_ipv4_route "0.0.0.0" 0
			fi
			i=$(($i + 1))
		done
	elif [ -n "$INTERNAL_IP4_ADDRESS" ]; then
		proto_add_ipv4_route "0.0.0.0" 0
	fi
	if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then
		i=0
		while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do
			eval NETWORK="\${CISCO_IPV6_SPLIT_INC_${i}_ADDR}"
			eval NETMASKLEN="\${CISCO_IPV6_SPLIT_INC_${i}_MASKLEN}"
			if [ $NETMASKLEN -lt 128 ]; then
				proto_add_ipv6_route "$NETWORK" "$NETMASKLEN"
			else
				proto_add_ipv6_route "::0" 0
			fi
			i=$(($i + 1))
		done
	elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then
		proto_add_ipv6_route "::0" 0
	fi
	proto_send_update "$INTERFACE"
}

do_disconnect() {
	if [ -f "/tmp/dnsmasq.d/openconnect.$TUNDEV" ]; then
		rm -f "/tmp/dnsmasq.d/openconnect.$TUNDEV"
		/etc/init.d/dnsmasq restart
	fi

	proto_init_update "$TUNDEV" 0
	proto_send_update "$INTERFACE"
}

#### Hooks
run_hooks() {
	HOOK="$1"

	if [ -d ${HOOKS_DIR}/${HOOK}.d ]; then
		for script in ${HOOKS_DIR}/${HOOK}.d/* ; do
			[ -f $script ] && . $script
		done
	fi
}

#### Main

if [ -z "$reason" ]; then
	logger -t openconnect "this script must be called from vpnc" 1>&2
	exit 1
fi
if [ -z "$INTERFACE" ]; then
	logger -t openconnect "this script must be called for an active interface"
	exit 1
fi

. /lib/netifd/netifd-proto.sh

case "$reason" in
	pre-init)
		run_hooks pre-init
		;;
	connect)
		run_hooks connect
		do_connect
		run_hooks post-connect
		;;
	disconnect)
		run_hooks disconnect
		do_disconnect
		run_hooks post-disconnect
		;;
	reconnect)
		run_hooks reconnect
		;;
	attempt-reconnect)
		run_hooks attempt-reconnect
		;;
	*)
		logger -t openconnect "unknown reason '$reason'. Maybe vpnc-script is out of date" 1>&2
		exit 1
		;;
esac

exit 0