From 83ee930c18b068c9a16b66c01aaa5d6e06570152 Mon Sep 17 00:00:00 2001 From: Michael Heimpold Date: Sun, 19 Apr 2020 02:46:46 +0200 Subject: [PATCH] arm: mxs: add support for I2SE's Duckbill boards The Duckbill devices are small, pen-drive sized boards based on NXP's i.MX28 SoC. While the initial variants (Duckbill series) were equipped with a micro SD card slot only, the latest generation (Duckbill 2 series) have an additional internal eMMC onboard. Both device generations consist of four "family members": - Duckbill/Duckbill 2: generic board, intended to be used as baseboard for custom designs and/or as development board - Duckbill EnOcean/Duckbill 2 EnOcean: come with an EnOcean daugther board equipped with the popular TCM310 module - Duckbill 485/Duckbill 2 485: as the name implies, these devices are intended to be used as Ethernet - RS485 converters - Duckbill SPI/Duckbill 2 SPI: not sold separately, but used in I2SE's development kits for Green PHY HomePlug Powerline communication Signed-off-by: Michael Heimpold Signed-off-by: Stefan Wahren --- arch/arm/mach-imx/mxs/Kconfig | 5 + board/i2se/duckbill/Kconfig | 15 +++ board/i2se/duckbill/MAINTAINERS | 6 + board/i2se/duckbill/Makefile | 10 ++ board/i2se/duckbill/duckbill.c | 189 ++++++++++++++++++++++++++++++++ board/i2se/duckbill/iomux.c | 157 ++++++++++++++++++++++++++ configs/duckbill_defconfig | 43 ++++++++ include/configs/duckbill.h | 172 +++++++++++++++++++++++++++++ 8 files changed, 597 insertions(+) create mode 100644 board/i2se/duckbill/Kconfig create mode 100644 board/i2se/duckbill/MAINTAINERS create mode 100644 board/i2se/duckbill/Makefile create mode 100644 board/i2se/duckbill/duckbill.c create mode 100644 board/i2se/duckbill/iomux.c create mode 100644 configs/duckbill_defconfig create mode 100644 include/configs/duckbill.h --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -50,6 +50,10 @@ config TARGET_APX4DEVKIT config TARGET_BG0900 bool "Support bg0900" +config TARGET_DUCKBILL + bool "Support duckbill" + select BOARD_EARLY_INIT_F + config TARGET_MX28EVK bool "Support mx28evk" select BOARD_EARLY_INIT_F @@ -70,6 +74,7 @@ config SYS_SOC source "board/bluegiga/apx4devkit/Kconfig" source "board/freescale/mx28evk/Kconfig" +source "board/i2se/duckbill/Kconfig" source "board/liebherr/xea/Kconfig" source "board/ppcag/bg0900/Kconfig" source "board/schulercontrol/sc_sps_1/Kconfig" --- /dev/null +++ b/board/i2se/duckbill/Kconfig @@ -0,0 +1,15 @@ +if TARGET_DUCKBILL + +config SYS_BOARD + default "duckbill" + +config SYS_VENDOR + default "i2se" + +config SYS_SOC + default "mxs" + +config SYS_CONFIG_NAME + default "duckbill" + +endif --- /dev/null +++ b/board/i2se/duckbill/MAINTAINERS @@ -0,0 +1,6 @@ +I2SE DUCKBILL BOARD +M: Michael Heimpold +S: Maintained +F: board/i2se/duckbill/ +F: include/configs/duckbill.h +F: configs/duckbill_defconfig --- /dev/null +++ b/board/i2se/duckbill/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2014-2020 +# Michael Heimpold, mhei@heimpold.de. + +ifndef CONFIG_SPL_BUILD +obj-y := duckbill.o +else +obj-y := iomux.o +endif --- /dev/null +++ b/board/i2se/duckbill/duckbill.c @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * I2SE Duckbill board + * + * Copyright (C) 2014-2020 Michael Heimpold + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static u32 system_rev; +static u32 serialno; + +/* + * Functions + */ +int board_early_init_f(void) +{ + /* IO0 clock at 480MHz */ + mxs_set_ioclk(MXC_IOCLK0, 480000); + /* IO1 clock at 480MHz */ + mxs_set_ioclk(MXC_IOCLK1, 480000); + + /* SSP0 clock at 96MHz */ + mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); + + return 0; +} + +int dram_init(void) +{ + return mxs_dram_init(); +} + +int board_init(void) +{ + /* Adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + return mxsmmc_initialize(bis, 0, NULL, NULL); +} +#endif + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + unsigned int reset_gpio; + int ret; + + ret = cpu_eth_init(bis); + + if (system_rev == 1) + reset_gpio = MX28_PAD_SSP0_DATA7__GPIO_2_7; + else + reset_gpio = MX28_PAD_GPMI_ALE__GPIO_0_26; + + /* Reset PHY */ + gpio_request(reset_gpio, "enet0_phy_rst"); + gpio_direction_output(reset_gpio, 0); + udelay(200); + gpio_set_value(reset_gpio, 1); + + /* give PHY some time to get out of the reset */ + udelay(10000); + + ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE); + if (ret) { + puts("FEC MXS: Unable to init FEC\n"); + return ret; + } + + return ret; +} + +void mx28_adjust_mac(int dev_id, unsigned char *mac) +{ + mac[0] = 0x00; + mac[1] = 0x01; + mac[2] = 0x87; +} +#endif + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, bd_t *bd) +{ + uint8_t enetaddr[6]; + u32 mac = 0; + +#ifdef CONFIG_MXS_OCOTP + /* only Duckbill SPI has a MAC for the QCA7k */ + fuse_read(0, 1, &mac); +#endif + + if (mac != 0) { + enetaddr[0] = 0x00; + enetaddr[1] = 0x01; + enetaddr[2] = 0x87; + enetaddr[3] = (mac >> 16) & 0xff; + enetaddr[4] = (mac >> 8) & 0xff; + enetaddr[5] = mac & 0xff; + + fdt_find_and_setprop(blob, "spi1/ethernet@0", + "local-mac-address", enetaddr, 6, 1); + } + + return 0; +} +#endif + +#ifdef CONFIG_REVISION_TAG +u32 get_board_rev(void) +{ + return system_rev; +} +#endif + +#ifdef CONFIG_SERIAL_TAG +void get_board_serial(struct tag_serialnr *serialnr) +{ + serialnr->low = serialno; + serialnr->high = 0; +} +#endif + +int misc_init_r(void) +{ + unsigned int led_red_gpio; + char *s; + + /* Board revision detection */ + gpio_request(MX28_PAD_LCD_D17__GPIO_1_17, "board_revision"); + gpio_direction_input(MX28_PAD_LCD_D17__GPIO_1_17); + + /* MX28_PAD_LCD_D17__GPIO_1_17: v1 = pull-down, v2 = pull-up */ + system_rev = + gpio_get_value(MX28_PAD_LCD_D17__GPIO_1_17); + system_rev += 1; + + /* guess DT blob if not set in environment */ + if (!env_get("fdt_file")) { + if (system_rev == 1) + env_set("fdt_file", "imx28-duckbill.dtb"); + else + env_set("fdt_file", "imx28-duckbill-2.dtb"); + } + + /* enable red LED to indicate a running bootloader */ + if (system_rev == 1) + led_red_gpio = MX28_PAD_AUART1_RX__GPIO_3_4; + else + led_red_gpio = MX28_PAD_SAIF0_LRCLK__GPIO_3_21; + gpio_request(led_red_gpio, "led_red"); + gpio_direction_output(led_red_gpio, 1); + + if (system_rev == 1) + puts("Board: I2SE Duckbill\n"); + else + puts("Board: I2SE Duckbill 2\n"); + + serialno = env_get_ulong("serial#", 10, 0); + s = env_get("serial#"); + if (s && s[0]) { + puts("Serial: "); + puts(s); + putc('\n'); + } + + return 0; +} --- /dev/null +++ b/board/i2se/duckbill/iomux.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * I2SE Duckbill IOMUX setup + * + * Copyright (C) 2013-2020 Michael Heimpold + */ + +#include +#include +#include +#include +#include +#include +#include + +#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) + +/* For all revisions */ +const iomux_cfg_t iomux_setup[] = { + /* DUART */ + MX28_PAD_PWM0__DUART_RX, + MX28_PAD_PWM1__DUART_TX, + + /* eMMC (v2) or SD card (v1) */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* Ethernet */ + MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET, + + /* EMI */ + MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI, + MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI, + MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI, + + MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, + MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, + MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, + MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, + MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI, + MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, + + /* Revision pin(s) */ + MX28_PAD_LCD_D17__GPIO_1_17, +}; + +/* For revision 1 only */ +const iomux_cfg_t iomux_setup_v1[] = { + /* PHY reset */ + MX28_PAD_SSP0_DATA7__GPIO_2_7 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + + /* LEDs */ + MX28_PAD_AUART1_RX__GPIO_3_4, + MX28_PAD_AUART1_TX__GPIO_3_5, +}; + +/* For revision 2 only */ +const iomux_cfg_t iomux_setup_v2[] = { + /* eMMC (v2) */ + MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0, + + /* PHY reset */ + MX28_PAD_GPMI_ALE__GPIO_0_26 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + + /* LEDs */ + MX28_PAD_SAIF0_LRCLK__GPIO_3_21, + MX28_PAD_SAIF0_MCLK__GPIO_3_20, +}; + +#define HW_DRAM_CTL29 (0x74 >> 2) +#define CS_MAP 0xf +#define COLUMN_SIZE 0x2 +#define ADDR_PINS 0x1 +#define APREBIT 0xa + +#define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \ + ADDR_PINS << 8 | APREBIT) + +void mxs_adjust_memory_params(uint32_t *dram_vals) +{ + dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG; +} + +void board_init_ll(const uint32_t arg, const uint32_t *resptr) +{ + mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup)); + + gpio_request(MX28_PAD_LCD_D17__GPIO_1_17, "board_revision"); + gpio_direction_input(MX28_PAD_LCD_D17__GPIO_1_17); + + if (gpio_get_value(MX28_PAD_LCD_D17__GPIO_1_17)) + mxs_iomux_setup_multiple_pads(iomux_setup_v2, ARRAY_SIZE(iomux_setup_v2)); + else + mxs_iomux_setup_multiple_pads(iomux_setup_v1, ARRAY_SIZE(iomux_setup_v1)); +} --- /dev/null +++ b/configs/duckbill_defconfig @@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX28=y +CONFIG_SYS_TEXT_BASE=0x40002000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_TARGET_DUCKBILL=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x20000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL=y +CONFIG_SPL_TEXT_BASE=0x00001000 +CONFIG_BOOTDELAY=1 +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_VERSION_VARIABLE=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_ARCH_MISC_INIT=y +# CONFIG_SPL_FRAMEWORK is not set +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_ELF is not set +CONFIG_CMD_UNZIP=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MMC_SWRITE=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_DOS_PARTITION=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_ENV_OFFSET_REDUND=0x40000 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_MXS_GPIO=y +CONFIG_MMC_MXS=y +CONFIG_MII=y +CONFIG_CONS_INDEX=0 +CONFIG_OF_LIBFDT=y --- /dev/null +++ b/include/configs/duckbill.h @@ -0,0 +1,172 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2014-2020 Michael Heimpold + * + */ +#ifndef __CONFIGS_DUCKBILL_H__ +#define __CONFIGS_DUCKBILL_H__ + +/* System configurations */ +#define CONFIG_MACH_TYPE MACH_TYPE_DUCKBILL + +#define CONFIG_MISC_INIT_R + +#define CONFIG_SYS_MXS_VDD5V_ONLY + +/* Memory configuration */ +#define PHYS_SDRAM_1 0x40000000 /* Base address */ +#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +/* Environment is in MMC */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_MMC_ENV_DEV 0 + +/* FEC Ethernet on SoC */ +#ifdef CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MX28_FEC_MAC_IN_OCOTP +#define CONFIG_FEC_MXC_MDIO_BASE MXS_ENET0_BASE +#endif + +#define CONFIG_IPADDR 192.168.1.10 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.1.254 + +/* Boot Linux */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_BOOTFILE "zImage" +#define CONFIG_LOADADDR 0x42000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_REVISION_TAG +#define CONFIG_SERIAL_TAG +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_BOOT_RETRY_TIME 120 /* retry autoboot after 120 seconds */ +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ + "press to stop\n" +#define CONFIG_AUTOBOOT_DELAY_STR "\x63" /* allows retry after retry time */ +#define CONFIG_AUTOBOOT_STOP_STR " " /* stop autoboot with */ +#define CONFIG_RESET_TO_RETRY /* reset board to retry booting */ + +/* Extra Environment */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mmc_part2_offset=1000\0" \ + "mmc_part3_offset=19000\0" \ + "update_openwrt_firmware_filename=openwrt-mxs-root.ext4\0" \ + "update_openwrt_firmware=" \ + "if mmc rescan; then " \ + "if tftp ${update_openwrt_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} + 1ff; " \ + "setexpr fw_sz ${fw_sz} / 200; " \ + "mmc write ${loadaddr} ${mmc_part2_offset} ${fw_sz}; " \ + "mmc write ${loadaddr} ${mmc_part3_offset} ${fw_sz}; " \ + "fi; " \ + "fi\0" \ + "update_fw_filename_prefix=emmc.img.\0" \ + "update_fw_filename_suffix=.gz\0" \ + "update_fw_parts=0x6\0" \ + "update_fw_fsize_uncompressed=4000000\0" \ + "gzwrite_wbuf=100000\0" \ + "update_emmc_firmware=" \ + "setexpr i ${update_fw_parts}; setexpr error 0; " \ + "while itest ${i} -gt 0; do " \ + "echo Transfering firmware image part ${i} of ${update_fw_parts}; " \ + "if itest ${i} -le f; then " \ + "setenv j 0${i}; " \ + "else " \ + "setenv j ${i}; " \ + "fi; " \ + "if tftp ${loadaddr} ${update_fw_basedir}${update_fw_filename_prefix}${j}${update_fw_filename_suffix}; then " \ + "setexpr k ${i} - 1; " \ + "setexpr offset ${update_fw_fsize_uncompressed} * ${k}; " \ + "if gzwrite mmc ${mmcdev} ${loadaddr} ${filesize} ${gzwrite_wbuf} ${offset}; then " \ + "setexpr i ${i} - 1; " \ + "else " \ + "setexpr i 0; " \ + "setexpr error 1; " \ + "fi; " \ + "else " \ + "setexpr i 0; " \ + "setexpr error 1; " \ + "fi; " \ + "done; setenv i; setenv j; setenv k; setenv fsize; setenv filesize; setenv offset; " \ + "if test ${error} -eq 1; then " \ + "echo Firmware Update FAILED; " \ + "else " \ + "echo Firmware Update OK; " \ + "fi; setenv error\0" \ + "image=zImage\0" \ + "console=ttyAMA0\0" \ + "fdt_addr=0x41000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "bootsys=1\0" \ + "mmcdev=0\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p2\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot} " \ + "rootwait bootsys=${bootsys} panic=1 ${extraargs}\0" \ + "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${image}\0" \ + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "setexpr mmcpart 1 + ${bootsys}; " \ + "setenv mmcroot /dev/mmcblk0p${mmcpart}; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi\0" \ + "nfsroot=/\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp ${extraargs}\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi;" \ + "fi; " \ + "else " \ + "bootz; " \ + "fi\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else " \ + "run netboot; " \ + "fi; " \ + "else " \ + "run netboot; " \ + "fi" + +/* The rest of the configuration is shared */ +#include + +#endif /* __CONFIGS_DUCKBILL_H__ */