From f32d3672fe2349b0ed3f2989dc64ac44f78339cb Mon Sep 17 00:00:00 2001 From: David Plowman Date: Wed, 22 Mar 2023 12:01:57 +0000 Subject: [PATCH 0427/1085] drivers: media: i2c: imx708: Fix WIDE_DYNAMIC_RANGE control with long exposure Setting V4L2_CID_WIDE_DYNAMIC_RANGE was causing the long exposure shift count to be reset, which is incorrect if the user has already changed the frame length to cause it to have a non-zero value. Because it only updates control ranges and doesn't set any registers, the control can also be applied when the sensor is not powered on. Signed-off-by: David Plowman --- drivers/media/i2c/imx708.c | 45 ++++++++++++++++++++++++-------------- 1 file changed, 28 insertions(+), 17 deletions(-) --- a/drivers/media/i2c/imx708.c +++ b/drivers/media/i2c/imx708.c @@ -171,7 +171,7 @@ struct imx708_mode { /* Not all modes have the same exposure lines step. */ u32 exposure_lines_step; - /* HDR flag, currently not used at runtime */ + /* HDR flag, used for checking if the current mode is HDR */ bool hdr; }; @@ -1060,9 +1060,6 @@ static void imx708_set_framing_limits(st unsigned int hblank; const struct imx708_mode *mode = imx708->mode; - /* Default to no long exposure multiplier */ - imx708->long_exp_shift = 0; - __v4l2_ctrl_modify_range(imx708->pixel_rate, mode->pixel_rate, mode->pixel_rate, 1, mode->pixel_rate); @@ -1091,12 +1088,33 @@ static int imx708_set_ctrl(struct v4l2_c unsigned int code, num_modes; int ret = 0; - /* - * The VBLANK control may change the limits of usable exposure, so check - * and adjust if necessary. - */ - if (ctrl->id == V4L2_CID_VBLANK) + switch (ctrl->id) { + case V4L2_CID_VBLANK: + /* + * The VBLANK control may change the limits of usable exposure, + * so check and adjust if necessary. + */ imx708_adjust_exposure_range(imx708, ctrl); + break; + + case V4L2_CID_WIDE_DYNAMIC_RANGE: + /* + * The WIDE_DYNAMIC_RANGE control can also be applied immediately + * as it doesn't set any registers. Don't do anything if the mode + * already matches. + */ + if (imx708->mode && imx708->mode->hdr != ctrl->val) { + code = imx708_get_format_code(imx708); + get_mode_table(code, &mode_list, &num_modes, ctrl->val); + imx708->mode = v4l2_find_nearest_size(mode_list, + num_modes, + width, height, + imx708->mode->width, + imx708->mode->height); + imx708_set_framing_limits(imx708); + } + break; + } /* * Applying V4L2 control value only happens @@ -1158,14 +1176,7 @@ static int imx708_set_ctrl(struct v4l2_c imx708->notify_gains->p_new.p_u32[3]); break; case V4L2_CID_WIDE_DYNAMIC_RANGE: - code = imx708_get_format_code(imx708); - get_mode_table(code, &mode_list, &num_modes, ctrl->val); - imx708->mode = v4l2_find_nearest_size(mode_list, - num_modes, - width, height, - imx708->mode->width, - imx708->mode->height); - imx708_set_framing_limits(imx708); + /* Already handled above. */ break; default: dev_info(&client->dev,