From 8f57ad92b4eec553b7e411558a4f503155d95fba Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Thu, 31 Mar 2022 17:12:12 +0100 Subject: [PATCH 0457/1085] media: i2c: imx258: Issue reset before starting streaming Whilst not documented, register 0x0103 bit 0 is the soft reset for the sensor, so send it before trying to configure the sensor. Signed-off-by: Dave Stevenson --- drivers/media/i2c/imx258.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/drivers/media/i2c/imx258.c +++ b/drivers/media/i2c/imx258.c @@ -20,6 +20,8 @@ #define IMX258_MODE_STANDBY 0x00 #define IMX258_MODE_STREAMING 0x01 +#define IMX258_REG_RESET 0x0103 + /* Chip ID */ #define IMX258_REG_CHIP_ID 0x0016 #define IMX258_CHIP_ID 0x0258 @@ -1279,6 +1281,14 @@ static int imx258_start_streaming(struct const struct imx258_link_freq_config *link_freq_cfg; int ret, link_freq_index; + ret = imx258_write_reg(imx258, IMX258_REG_RESET, IMX258_REG_VALUE_08BIT, + 0x01); + if (ret) { + dev_err(&client->dev, "%s failed to reset sensor\n", __func__); + return ret; + } + usleep_range(10000, 15000); + /* Setup PLL */ link_freq_index = imx258->cur_mode->link_freq_index; link_freq_cfg = &imx258->link_freq_configs[link_freq_index];