From 539504510aa759949141e0204d3548f95f8f9a42 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Wed, 12 Oct 2022 13:24:51 +0100
Subject: [PATCH 0531/1085] serial: pl011: rp1 uart support

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 drivers/tty/serial/amba-pl011.c | 96 +++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)

--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -152,6 +152,20 @@ static const struct vendor_data vendor_s
 	.fixed_options		= true,
 };
 
+static struct vendor_data vendor_arm_axi = {
+	.reg_offset		= pl011_std_offsets,
+	.ifls			= UART011_IFLS_RX4_8 | UART011_IFLS_TX4_8,
+	.fr_busy		= UART01x_FR_BUSY,
+	.fr_dsr			= UART01x_FR_DSR,
+	.fr_cts			= UART01x_FR_CTS,
+	.fr_ri			= UART011_FR_RI,
+	.oversampling		= false,
+	.dma_threshold		= false,
+	.cts_event_workaround	= false,
+	.always_enabled		= false,
+	.fixed_options		= false,
+};
+
 #ifdef CONFIG_ACPI_SPCR_TABLE
 static const struct vendor_data vendor_qdt_qdf2400_e44 = {
 	.reg_offset		= pl011_std_offsets,
@@ -2979,6 +2993,86 @@ static struct platform_driver arm_sbsa_u
 	},
 };
 
+static int pl011_axi_probe(struct platform_device *pdev)
+{
+	struct uart_amba_port *uap;
+	struct vendor_data *vendor =  &vendor_arm_axi;
+	struct resource *r;
+	unsigned int periphid;
+	int portnr, ret, irq;
+
+	portnr = pl011_find_free_port();
+	if (portnr < 0)
+		return portnr;
+
+	uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port),
+			   GFP_KERNEL);
+	if (!uap)
+		return -ENOMEM;
+
+	uap->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(uap->clk))
+		return PTR_ERR(uap->clk);
+
+	if (of_property_read_bool(pdev->dev.of_node, "cts-event-workaround")) {
+		vendor->cts_event_workaround = true;
+		dev_info(&pdev->dev, "cts_event_workaround enabled\n");
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	periphid = 0x00241011; /* A safe default */
+	of_property_read_u32(pdev->dev.of_node, "arm,primecell-periphid",
+			     &periphid);
+
+	uap->reg_offset = vendor->reg_offset;
+	uap->vendor = vendor;
+	uap->fifosize = (AMBA_REV_BITS(periphid) < 3) ? 16 : 32;
+	uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
+	uap->port.irq = irq;
+	uap->port.ops = &amba_pl011_pops;
+
+	snprintf(uap->type, sizeof(uap->type), "PL011 AXI");
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	ret = pl011_setup_port(&pdev->dev, uap, r, portnr);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, uap);
+
+	return pl011_register_port(uap);
+}
+
+static int pl011_axi_remove(struct platform_device *pdev)
+{
+	struct uart_amba_port *uap = platform_get_drvdata(pdev);
+
+	uart_remove_one_port(&amba_reg, &uap->port);
+	pl011_unregister_port(uap);
+	return 0;
+}
+
+static const struct of_device_id pl011_axi_of_match[] = {
+	{ .compatible = "arm,pl011-axi" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pl011_axi_of_match);
+
+static struct platform_driver pl011_axi_platform_driver = {
+	.probe		= pl011_axi_probe,
+	.remove		= pl011_axi_remove,
+	.driver	= {
+		.name	= "pl011-axi",
+		.pm	= &pl011_dev_pm_ops,
+		.of_match_table = of_match_ptr(pl011_axi_of_match),
+		.suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_AMBA_PL011),
+	},
+};
+
 static const struct amba_id pl011_ids[] = {
 	{
 		.id	= 0x00041011,
@@ -3012,6 +3106,8 @@ static int __init pl011_init(void)
 
 	if (platform_driver_register(&arm_sbsa_uart_platform_driver))
 		pr_warn("could not register SBSA UART platform driver\n");
+	if (platform_driver_register(&pl011_axi_platform_driver))
+		pr_warn("could not register PL011 AXI platform driver\n");
 	return amba_driver_register(&pl011_driver);
 }