From f61d5d294f12df46380ef1af5f55abe8e8f45500 Mon Sep 17 00:00:00 2001 From: Dom Cobley Date: Tue, 24 Oct 2023 16:20:42 +0100 Subject: [PATCH 0713/1085] drm/vc4: crtc: Support odd horizontal timings on BCM2712 BCM2711 runs pixelvalve at two pixels per clock cycle which results in an unfortunate limitation that odd horizontal timings are not possible. This is apparent on the standard DMT mode of 1366x768@60 which cannot be driven with correct timing. BCM2712 defaults to the same behaviour, but has a mode to support odd timings. While internally it still runs at two pixels per clock, setting the PV_VCONTROL_ODD_TIMING bit makes it appear externally to behave as it is one pixel per clock. Switching to this mode fixes 1366x768@60 mode, and other custom resultions with odd horizontal timings. Signed-off-by: Dom Cobley --- drivers/gpu/drm/vc4/vc4_crtc.c | 12 ++++-------- drivers/gpu/drm/vc4/vc4_hdmi.c | 4 ++-- drivers/gpu/drm/vc4/vc4_regs.h | 1 + 3 files changed, 7 insertions(+), 10 deletions(-) --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -399,12 +399,6 @@ static void vc4_crtc_config_pv(struct dr vc4_crtc_pixelvalve_reset(crtc); - /* - * NOTE: The BCM2712 has a H_OTE (Horizontal Odd Timing Enable) - * bit that, when set, will allow to specify the timings in - * pixels instead of cycles, thus allowing to specify odd - * timings. - */ CRTC_WRITE(PV_HORZA, VC4_SET_FIELD((mode->htotal - mode->hsync_end) * pixel_rep / ppc, PV_HORZA_HBP) | @@ -449,6 +443,7 @@ static void vc4_crtc_config_pv(struct dr */ CRTC_WRITE(PV_V_CONTROL, PV_VCONTROL_CONTINUOUS | + (vc4->gen >= VC4_GEN_6 ? PV_VCONTROL_ODD_TIMING : 0) | (is_dsi ? PV_VCONTROL_DSI : 0) | PV_VCONTROL_INTERLACE | (odd_field_first @@ -460,6 +455,7 @@ static void vc4_crtc_config_pv(struct dr } else { CRTC_WRITE(PV_V_CONTROL, PV_VCONTROL_CONTINUOUS | + (vc4->gen >= VC4_GEN_6 ? PV_VCONTROL_ODD_TIMING : 0) | (is_dsi ? PV_VCONTROL_DSI : 0)); CRTC_WRITE(PV_VSYNCD_EVEN, 0); } @@ -1332,7 +1328,7 @@ const struct vc4_pv_data bcm2712_pv0_dat .hvs_output = 0, }, .fifo_depth = 64, - .pixels_per_clock = 2, + .pixels_per_clock = 1, .encoder_types = { [0] = VC4_ENCODER_TYPE_HDMI0, }, @@ -1345,7 +1341,7 @@ const struct vc4_pv_data bcm2712_pv1_dat .hvs_output = 1, }, .fifo_depth = 64, - .pixels_per_clock = 2, + .pixels_per_clock = 1, .encoder_types = { [0] = VC4_ENCODER_TYPE_HDMI1, }, --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -3918,7 +3918,7 @@ static const struct vc4_hdmi_variant bcm PHY_LANE_2, PHY_LANE_CK, }, - .unsupported_odd_h_timings = true, + .unsupported_odd_h_timings = false, .external_irq_controller = true, .init_resources = vc5_hdmi_init_resources, @@ -3945,7 +3945,7 @@ static const struct vc4_hdmi_variant bcm PHY_LANE_2, PHY_LANE_CK, }, - .unsupported_odd_h_timings = true, + .unsupported_odd_h_timings = false, .external_irq_controller = true, .init_resources = vc5_hdmi_init_resources, --- a/drivers/gpu/drm/vc4/vc4_regs.h +++ b/drivers/gpu/drm/vc4/vc4_regs.h @@ -155,6 +155,7 @@ # define PV_CONTROL_EN BIT(0) #define PV_V_CONTROL 0x04 +# define PV_VCONTROL_ODD_TIMING BIT(29) # define PV_VCONTROL_ODD_DELAY_MASK VC4_MASK(22, 6) # define PV_VCONTROL_ODD_DELAY_SHIFT 6 # define PV_VCONTROL_ODD_FIRST BIT(5)