From 1ef18f01127396c96d1b4e635d924d39ae6b007a Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 4 Jan 2024 13:56:39 +0000 Subject: [PATCH 0817/1085] ARM: dts: bcm2712-rpi-5-b: Add eth_ledx parameters Include the dtparams controlling the Ethernet jack LEDs, as used on other Pis. See: https://github.com/raspberrypi/linux/issues/5825 Signed-off-by: Phil Elwell --- arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 2 ++ arch/arm/boot/dts/overlays/README | 6 +++--- 2 files changed, 5 insertions(+), 3 deletions(-) --- a/arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -830,6 +830,8 @@ spi10_cs_pins: &spi10_cs_gpio1 {}; act_led_trigger = <&act_led>, "linux,default-trigger"; pwr_led_activelow = <&pwr_led>, "gpios:8"; pwr_led_trigger = <&pwr_led>, "linux,default-trigger"; + eth_led0 = <&phy1>,"led-modes:0"; + eth_led1 = <&phy1>,"led-modes:4"; drm_fb0_rp1_dsi0 = <&aliases>, "drm-fb0=",&dsi0; drm_fb0_rp1_dsi1 = <&aliases>, "drm-fb0=",&dsi1; drm_fb0_rp1_dpi = <&aliases>, "drm-fb0=",&dpi; --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -207,7 +207,7 @@ Params: 0 means never downshift (default 2). Pi3B+ only. eth_led0 Set mode of LED0 - amber on Pi3B+ (default "1"), - green on Pi4 (default "0"). + green on Pi4/5 (default "0"). The legal values are: Pi3B+ @@ -217,7 +217,7 @@ Params: 4=link100/1000/activity 5=link10/1000/activity 6=link10/100/activity 14=off 15=on - Pi4 + Pi4/5 0=Speed/Activity 1=Speed 2=Flash activity 3=FDX @@ -226,7 +226,7 @@ Params: 8=Link 9=Activity eth_led1 Set mode of LED1 - green on Pi3B+ (default "6"), - amber on Pi4 (default "8"). See eth_led0 for + amber on Pi4/5 (default "8"). See eth_led0 for legal values. eth_max_speed Set the maximum speed a link is allowed