From a6bb7d4e4abbcefcd00e37835df1c4e64b2dc732 Mon Sep 17 00:00:00 2001 From: Lee Jackson Date: Wed, 10 Jan 2024 08:52:54 +0800 Subject: [PATCH 0822/1085] drivers: media: imx519: Add V4L2_CID_LINK_FREQ control Add V4L2_CID_LINK_FREQ as a read-only control with a value of 408 Mhz. This will be used by the CFE driver to corretly setup the DPHY timing parameters in the CSI-2 block. Signed-off-by: Lee Jackson --- drivers/media/i2c/imx519.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) --- a/drivers/media/i2c/imx519.c +++ b/drivers/media/i2c/imx519.c @@ -145,6 +145,10 @@ struct imx519_mode { struct imx519_reg_list reg_list; }; +static const s64 imx519_link_freq_menu[] = { + IMX519_DEFAULT_LINK_FREQ, +}; + static const struct imx519_reg mode_common_regs[] = { {0x0100, 0x00}, {0x0136, 0x18}, @@ -1819,6 +1823,7 @@ static int imx519_init_controls(struct i struct v4l2_ctrl_handler *ctrl_hdlr; struct i2c_client *client = v4l2_get_subdevdata(&imx519->sd); struct v4l2_fwnode_device_properties props; + struct v4l2_ctrl *link_freq; unsigned int i; int ret; @@ -1837,6 +1842,15 @@ static int imx519_init_controls(struct i IMX519_PIXEL_RATE, 1, IMX519_PIXEL_RATE); + /* LINK_FREQ is also read only */ + link_freq = + v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx519_ctrl_ops, + V4L2_CID_LINK_FREQ, + ARRAY_SIZE(imx519_link_freq_menu) - 1, 0, + imx519_link_freq_menu); + if (link_freq) + link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; + /* * Create the controls here, but mode specific limits are setup * in the imx519_set_framing_limits() call below.