From 898e5687a8e9f506d0c62afe5ca995a527ffd25a Mon Sep 17 00:00:00 2001 From: Naushir Patuck Date: Tue, 14 Mar 2023 12:56:14 +0000 Subject: [PATCH 0957/1085] media: i2c: imx296: Add helper for hblank control Add a helper function to setup the horizontal blanking control. Update the control limits on set_format as the horizontal blanking time must remain constant regardless of sensor output width. Signed-off-by: Naushir Patuck --- drivers/media/i2c/imx296.c | 44 ++++++++++++++++++++++++++------------ 1 file changed, 30 insertions(+), 14 deletions(-) --- a/drivers/media/i2c/imx296.c +++ b/drivers/media/i2c/imx296.c @@ -388,10 +388,36 @@ static const struct v4l2_ctrl_ops imx296 .s_ctrl = imx296_s_ctrl, }; +static void imx296_setup_hblank(struct imx296 *sensor, unsigned int width) +{ + /* + * Horizontal blanking is controlled through the HMAX register, which + * contains a line length in contains a line length in units of an + * internal 74.25 MHz clock derived from the INCLK. The HMAX value is + * currently fixed to 1100, convert it to a number of pixels based on + * the nominal pixel rate. + * + * Horizontal blanking is fixed, regardless of the crop width, so + * ensure the hblank limits are adjusted to account for this. + */ + unsigned int hblank = 1100 * 1188000000ULL / 10 / 74250000 - width; + + if (!sensor->hblank) { + sensor->hblank = v4l2_ctrl_new_std(&sensor->ctrls, + &imx296_ctrl_ops, + V4L2_CID_HBLANK, hblank, + hblank, 1, hblank); + if (sensor->hblank) + sensor->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; + } else { + __v4l2_ctrl_modify_range(sensor->hblank, hblank, hblank, 1, + hblank); + } +} + static int imx296_ctrls_init(struct imx296 *sensor) { struct v4l2_fwnode_device_properties props; - unsigned int hblank; int ret; ret = v4l2_fwnode_device_parse(sensor->dev, &props); @@ -406,19 +432,7 @@ static int imx296_ctrls_init(struct imx2 V4L2_CID_ANALOGUE_GAIN, IMX296_GAIN_MIN, IMX296_GAIN_MAX, 1, IMX296_GAIN_MIN); - /* - * Horizontal blanking is controlled through the HMAX register, which - * contains a line length in INCK clock units. The INCK frequency is - * fixed to 74.25 MHz. The HMAX value is currently fixed to 1100, - * convert it to a number of pixels based on the nominal pixel rate. - */ - hblank = 1100 * 1188000000ULL / 10 / 74250000 - - IMX296_PIXEL_ARRAY_WIDTH; - sensor->hblank = v4l2_ctrl_new_std(&sensor->ctrls, &imx296_ctrl_ops, - V4L2_CID_HBLANK, hblank, hblank, 1, - hblank); - if (sensor->hblank) - sensor->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; + imx296_setup_hblank(sensor, IMX296_PIXEL_ARRAY_WIDTH); sensor->vblank = v4l2_ctrl_new_std(&sensor->ctrls, &imx296_ctrl_ops, V4L2_CID_VBLANK, 30, @@ -718,6 +732,8 @@ static int imx296_set_format(struct v4l2 format->width = crop->width; format->height = crop->height; + imx296_setup_hblank(sensor, format->width); + format->code = sensor->mono ? MEDIA_BUS_FMT_Y10_1X10 : MEDIA_BUS_FMT_SBGGR10_1X10; format->field = V4L2_FIELD_NONE;