From deb8af5243504e379878ae3f9a091b21422d65b2 Mon Sep 17 00:00:00 2001 From: Alexander Couzens Date: Tue, 9 Apr 2024 09:30:11 +0200 Subject: [PATCH] net: phy: realtek: configure SerDes mode for rtl822xb PHYs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The rtl8221b and rtl8226b series support switching SerDes mode between 2500base-x and sgmii based on the negotiated copper speed. Configure this switching mode according to SerDes modes supported by host. There is an additional datasheet for RTL8226B/RTL8221B called "SERDES MODE SETTING FLOW APPLICATION NOTE" where a sequence is described to setup interface and rate adapter mode. However, there is no documentation about the meaning of registers and bits, it's literally just magic numbers and pseudo-code. Signed-off-by: Alexander Couzens [ refactored, dropped HiSGMII mode and changed commit message ] Signed-off-by: Marek Behún [ changed rtl822x_update_interface() to use vendor register ] [ always fill in possible interfaces ] [ only apply to rtl8221b and rtl8226b phy's ] [ set phydev->rate_matching in .config_init() ] Signed-off-by: Eric Woudstra Reviewed-by: Russell King (Oracle) Reviewed-by: should come before them, without any blank lines. As the Signed-off-by: David S. Miller --- drivers/net/phy/realtek.c | 114 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 110 insertions(+), 4 deletions(-) --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -54,6 +54,16 @@ RTL8201F_ISR_LINK) #define RTL8201F_IER 0x13 +#define RTL822X_VND1_SERDES_OPTION 0x697a +#define RTL822X_VND1_SERDES_OPTION_MODE_MASK GENMASK(5, 0) +#define RTL822X_VND1_SERDES_OPTION_MODE_2500BASEX_SGMII 0 +#define RTL822X_VND1_SERDES_OPTION_MODE_2500BASEX 2 + +#define RTL822X_VND1_SERDES_CTRL3 0x7580 +#define RTL822X_VND1_SERDES_CTRL3_MODE_MASK GENMASK(5, 0) +#define RTL822X_VND1_SERDES_CTRL3_MODE_SGMII 0x02 +#define RTL822X_VND1_SERDES_CTRL3_MODE_2500BASEX 0x16 + #define RTL8366RB_POWER_SAVE 0x15 #define RTL8366RB_POWER_SAVE_ON BIT(12) @@ -659,6 +669,63 @@ static int rtl822x_write_mmd(struct phy_ return ret; } +static int rtl822xb_config_init(struct phy_device *phydev) +{ + bool has_2500, has_sgmii; + u16 mode; + int ret; + + has_2500 = test_bit(PHY_INTERFACE_MODE_2500BASEX, + phydev->host_interfaces) || + phydev->interface == PHY_INTERFACE_MODE_2500BASEX; + + has_sgmii = test_bit(PHY_INTERFACE_MODE_SGMII, + phydev->host_interfaces) || + phydev->interface == PHY_INTERFACE_MODE_SGMII; + + /* fill in possible interfaces */ + __assign_bit(PHY_INTERFACE_MODE_2500BASEX, phydev->possible_interfaces, + has_2500); + __assign_bit(PHY_INTERFACE_MODE_SGMII, phydev->possible_interfaces, + has_sgmii); + + if (!has_2500 && !has_sgmii) + return 0; + + /* determine SerDes option mode */ + if (has_2500 && !has_sgmii) { + mode = RTL822X_VND1_SERDES_OPTION_MODE_2500BASEX; + phydev->rate_matching = RATE_MATCH_PAUSE; + } else { + mode = RTL822X_VND1_SERDES_OPTION_MODE_2500BASEX_SGMII; + phydev->rate_matching = RATE_MATCH_NONE; + } + + /* the following sequence with magic numbers sets up the SerDes + * option mode + */ + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x75f3, 0); + if (ret < 0) + return ret; + + ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND1, + RTL822X_VND1_SERDES_OPTION, + RTL822X_VND1_SERDES_OPTION_MODE_MASK, + mode); + if (ret < 0) + return ret; + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x6a04, 0x0503); + if (ret < 0) + return ret; + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x6f10, 0xd455); + if (ret < 0) + return ret; + + return phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x6f11, 0x8020); +} + static int rtl822x_get_features(struct phy_device *phydev) { int val; @@ -695,6 +762,28 @@ static int rtl822x_config_aneg(struct ph return __genphy_config_aneg(phydev, ret); } +static void rtl822xb_update_interface(struct phy_device *phydev) +{ + int val; + + if (!phydev->link) + return; + + /* Change interface according to serdes mode */ + val = phy_read_mmd(phydev, MDIO_MMD_VEND1, RTL822X_VND1_SERDES_CTRL3); + if (val < 0) + return; + + switch (val & RTL822X_VND1_SERDES_CTRL3_MODE_MASK) { + case RTL822X_VND1_SERDES_CTRL3_MODE_2500BASEX: + phydev->interface = PHY_INTERFACE_MODE_2500BASEX; + break; + case RTL822X_VND1_SERDES_CTRL3_MODE_SGMII: + phydev->interface = PHY_INTERFACE_MODE_SGMII; + break; + } +} + static int rtl822x_read_status(struct phy_device *phydev) { int ret; @@ -716,6 +805,19 @@ static int rtl822x_read_status(struct ph return rtlgen_get_speed(phydev); } +static int rtl822xb_read_status(struct phy_device *phydev) +{ + int ret; + + ret = rtl822x_read_status(phydev); + if (ret < 0) + return ret; + + rtl822xb_update_interface(phydev); + + return 0; +} + static bool rtlgen_supports_2_5gbps(struct phy_device *phydev) { int val; @@ -988,7 +1090,8 @@ static struct phy_driver realtek_drvs[] .name = "RTL8226B_RTL8221B 2.5Gbps PHY", .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, - .read_status = rtl822x_read_status, + .config_init = rtl822xb_config_init, + .read_status = rtl822xb_read_status, .suspend = genphy_suspend, .resume = rtlgen_resume, .read_page = rtl821x_read_page, @@ -1010,7 +1113,8 @@ static struct phy_driver realtek_drvs[] .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY", .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, - .read_status = rtl822x_read_status, + .config_init = rtl822xb_config_init, + .read_status = rtl822xb_read_status, .suspend = genphy_suspend, .resume = rtlgen_resume, .read_page = rtl821x_read_page, @@ -1020,7 +1124,8 @@ static struct phy_driver realtek_drvs[] .name = "RTL8221B-VB-CG 2.5Gbps PHY", .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, - .read_status = rtl822x_read_status, + .config_init = rtl822xb_config_init, + .read_status = rtl822xb_read_status, .suspend = genphy_suspend, .resume = rtlgen_resume, .read_page = rtl821x_read_page, @@ -1030,7 +1135,8 @@ static struct phy_driver realtek_drvs[] .name = "RTL8221B-VM-CG 2.5Gbps PHY", .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, - .read_status = rtl822x_read_status, + .config_init = rtl822xb_config_init, + .read_status = rtl822xb_read_status, .suspend = genphy_suspend, .resume = rtlgen_resume, .read_page = rtl821x_read_page,