From 17784801d888238571a0c4101b9ac4401fffeaa0 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 25 Jun 2024 22:42:17 +0200 Subject: [PATCH] net: phy: realtek: Add support for PHY LEDs on RTL8211F Realtek RTL8211F Ethernet PHY supports 3 LED pins which are used to indicate link status and activity. Add minimal LED controller driver supporting the most common uses with the 'netdev' trigger. Signed-off-by: Marek Vasut Signed-off-by: David S. Miller --- drivers/net/phy/realtek.c | 106 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -32,6 +32,15 @@ #define RTL8211F_PHYCR2 0x19 #define RTL8211F_INSR 0x1d +#define RTL8211F_LEDCR 0x10 +#define RTL8211F_LEDCR_MODE BIT(15) +#define RTL8211F_LEDCR_ACT_TXRX BIT(4) +#define RTL8211F_LEDCR_LINK_1000 BIT(3) +#define RTL8211F_LEDCR_LINK_100 BIT(1) +#define RTL8211F_LEDCR_LINK_10 BIT(0) +#define RTL8211F_LEDCR_MASK GENMASK(4, 0) +#define RTL8211F_LEDCR_SHIFT 5 + #define RTL8211F_TX_DELAY BIT(8) #define RTL8211F_RX_DELAY BIT(3) @@ -87,6 +96,8 @@ #define RTL_8221B_VN_CG 0x001cc84a #define RTL_8251B 0x001cc862 +#define RTL8211F_LED_COUNT 3 + MODULE_DESCRIPTION("Realtek PHY driver"); MODULE_AUTHOR("Johnson Leung"); MODULE_LICENSE("GPL"); @@ -476,6 +487,98 @@ static int rtl821x_resume(struct phy_dev return 0; } +static int rtl8211f_led_hw_is_supported(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + const unsigned long mask = BIT(TRIGGER_NETDEV_LINK_10) | + BIT(TRIGGER_NETDEV_LINK_100) | + BIT(TRIGGER_NETDEV_LINK_1000) | + BIT(TRIGGER_NETDEV_RX) | + BIT(TRIGGER_NETDEV_TX); + + /* The RTL8211F PHY supports these LED settings on up to three LEDs: + * - Link: Configurable subset of 10/100/1000 link rates + * - Active: Blink on activity, RX or TX is not differentiated + * The Active option has two modes, A and B: + * - A: Link and Active indication at configurable, but matching, + * subset of 10/100/1000 link rates + * - B: Link indication at configurable subset of 10/100/1000 link + * rates and Active indication always at all three 10+100+1000 + * link rates. + * This code currently uses mode B only. + */ + + if (index >= RTL8211F_LED_COUNT) + return -EINVAL; + + /* Filter out any other unsupported triggers. */ + if (rules & ~mask) + return -EOPNOTSUPP; + + /* RX and TX are not differentiated, either both are set or not set. */ + if (!(rules & BIT(TRIGGER_NETDEV_RX)) ^ !(rules & BIT(TRIGGER_NETDEV_TX))) + return -EOPNOTSUPP; + + return 0; +} + +static int rtl8211f_led_hw_control_get(struct phy_device *phydev, u8 index, + unsigned long *rules) +{ + int val; + + val = phy_read_paged(phydev, 0xd04, RTL8211F_LEDCR); + if (val < 0) + return val; + + val >>= RTL8211F_LEDCR_SHIFT * index; + val &= RTL8211F_LEDCR_MASK; + + if (val & RTL8211F_LEDCR_LINK_10) + set_bit(TRIGGER_NETDEV_LINK_10, rules); + + if (val & RTL8211F_LEDCR_LINK_100) + set_bit(TRIGGER_NETDEV_LINK_100, rules); + + if (val & RTL8211F_LEDCR_LINK_1000) + set_bit(TRIGGER_NETDEV_LINK_1000, rules); + + if (val & RTL8211F_LEDCR_ACT_TXRX) { + set_bit(TRIGGER_NETDEV_RX, rules); + set_bit(TRIGGER_NETDEV_TX, rules); + } + + return 0; +} + +static int rtl8211f_led_hw_control_set(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + const u16 mask = RTL8211F_LEDCR_MASK << (RTL8211F_LEDCR_SHIFT * index); + u16 reg = RTL8211F_LEDCR_MODE; /* Mode B */ + + if (index >= RTL8211F_LED_COUNT) + return -EINVAL; + + if (test_bit(TRIGGER_NETDEV_LINK_10, &rules)) + reg |= RTL8211F_LEDCR_LINK_10; + + if (test_bit(TRIGGER_NETDEV_LINK_100, &rules)) + reg |= RTL8211F_LEDCR_LINK_100; + + if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules)) + reg |= RTL8211F_LEDCR_LINK_1000; + + if (test_bit(TRIGGER_NETDEV_RX, &rules) || + test_bit(TRIGGER_NETDEV_TX, &rules)) { + reg |= RTL8211F_LEDCR_ACT_TXRX; + } + + reg <<= RTL8211F_LEDCR_SHIFT * index; + + return phy_modify_paged(phydev, 0xd04, RTL8211F_LEDCR, mask, reg); +} + static int rtl8211e_config_init(struct phy_device *phydev) { int ret = 0, oldpage; @@ -1192,6 +1295,9 @@ static struct phy_driver realtek_drvs[] .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, .flags = PHY_ALWAYS_CALL_SUSPEND, + .led_hw_is_supported = rtl8211f_led_hw_is_supported, + .led_hw_control_get = rtl8211f_led_hw_control_get, + .led_hw_control_set = rtl8211f_led_hw_control_set, }, { PHY_ID_MATCH_EXACT(RTL_8211FVD_PHYID), .name = "RTL8211F-VD Gigabit Ethernet",