/* mpfr_agm -- arithmetic-geometric mean of two floating-point numbers Copyright 1999-2019 Free Software Foundation, Inc. Contributed by the AriC and Caramba projects, INRIA. This file is part of the GNU MPFR Library. The GNU MPFR Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. The GNU MPFR Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with the GNU MPFR Library; see the file COPYING.LESSER. If not, see https://www.gnu.org/licenses/ or write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. */ #define MPFR_NEED_LONGLONG_H #include "mpfr-impl.h" /* agm(x,y) is between x and y, so we don't need to save exponent range */ int mpfr_agm (mpfr_ptr r, mpfr_srcptr op2, mpfr_srcptr op1, mpfr_rnd_t rnd_mode) { int compare, inexact; mp_size_t s; mpfr_prec_t p, q; mp_limb_t *up, *vp, *ufp, *vfp; mpfr_t u, v, uf, vf, sc1, sc2; mpfr_exp_t scaleop = 0, scaleit; unsigned long n; /* number of iterations */ MPFR_ZIV_DECL (loop); MPFR_TMP_DECL(marker); MPFR_SAVE_EXPO_DECL (expo); MPFR_LOG_FUNC (("op2[%Pu]=%.*Rg op1[%Pu]=%.*Rg rnd=%d", mpfr_get_prec (op2), mpfr_log_prec, op2, mpfr_get_prec (op1), mpfr_log_prec, op1, rnd_mode), ("r[%Pu]=%.*Rg inexact=%d", mpfr_get_prec (r), mpfr_log_prec, r, inexact)); /* Deal with special values */ if (MPFR_ARE_SINGULAR (op1, op2)) { /* If a or b is NaN, the result is NaN */ if (MPFR_IS_NAN(op1) || MPFR_IS_NAN(op2)) { MPFR_SET_NAN(r); MPFR_RET_NAN; } /* now one of a or b is Inf or 0 */ /* If a and b is +Inf, the result is +Inf. Otherwise if a or b is -Inf or 0, the result is NaN */ else if (MPFR_IS_INF(op1) || MPFR_IS_INF(op2)) { if (MPFR_IS_STRICTPOS(op1) && MPFR_IS_STRICTPOS(op2)) { MPFR_SET_INF(r); MPFR_SET_SAME_SIGN(r, op1); MPFR_RET(0); /* exact */ } else { MPFR_SET_NAN(r); MPFR_RET_NAN; } } else /* a and b are neither NaN nor Inf, and one is zero */ { /* If a or b is 0, the result is +0, in particular because the result is always >= 0 with our definition (Maple sometimes chooses a different sign for GaussAGM, but it uses another definition, with possible negative results). */ MPFR_ASSERTD (MPFR_IS_ZERO (op1) || MPFR_IS_ZERO (op2)); MPFR_SET_POS (r); MPFR_SET_ZERO (r); MPFR_RET (0); /* exact */ } } /* If a or b is negative (excluding -Infinity), the result is NaN */ if (MPFR_UNLIKELY(MPFR_IS_NEG(op1) || MPFR_IS_NEG(op2))) { MPFR_SET_NAN(r); MPFR_RET_NAN; } /* Precision of the following calculus */ q = MPFR_PREC(r); p = q + MPFR_INT_CEIL_LOG2(q) + 15; MPFR_ASSERTD (p >= 7); /* see algorithms.tex */ s = MPFR_PREC2LIMBS (p); /* b (op2) and a (op1) are the 2 operands but we want b >= a */ compare = mpfr_cmp (op1, op2); if (MPFR_UNLIKELY( compare == 0 )) return mpfr_set (r, op1, rnd_mode); else if (compare > 0) { mpfr_srcptr t = op1; op1 = op2; op2 = t; } /* Now b (=op2) > a (=op1) */ MPFR_SAVE_EXPO_MARK (expo); MPFR_TMP_MARK(marker); /* Main loop */ MPFR_ZIV_INIT (loop, p); for (;;) { mpfr_prec_t eq; unsigned long err = 0; /* must be set to 0 at each Ziv iteration */ MPFR_BLOCK_DECL (flags); /* Init temporary vars */ MPFR_TMP_INIT (up, u, p, s); MPFR_TMP_INIT (vp, v, p, s); MPFR_TMP_INIT (ufp, uf, p, s); MPFR_TMP_INIT (vfp, vf, p, s); /* Calculus of un and vn */ retry: MPFR_BLOCK (flags, mpfr_mul (u, op1, op2, MPFR_RNDN); /* mpfr_mul(...): faster since PREC(op) < PREC(u) */ mpfr_add (v, op1, op2, MPFR_RNDN); /* mpfr_add with !=prec is still good */); if (MPFR_UNLIKELY (MPFR_OVERFLOW (flags) || MPFR_UNDERFLOW (flags))) { mpfr_exp_t e1 , e2; MPFR_ASSERTN (scaleop == 0); e1 = MPFR_GET_EXP (op1); e2 = MPFR_GET_EXP (op2); /* Let's determine scaleop to avoid an overflow/underflow. */ if (MPFR_OVERFLOW (flags)) { /* Let's recall that emin <= e1 <= e2 <= emax. There has been an overflow. Thus e2 >= emax/2. If the mpfr_mul overflowed, then e1 + e2 > emax. If the mpfr_add overflowed, then e2 = emax. We want: (e1 + scale) + (e2 + scale) <= emax, i.e. scale <= (emax - e1 - e2) / 2. Let's take scale = min(floor((emax - e1 - e2) / 2), -1). This is OK, as: 1. emin <= scale <= -1. 2. e1 + scale >= emin. Indeed: * If e1 + e2 > emax, then e1 + scale >= e1 + (emax - e1 - e2) / 2 - 1 >= (emax + e1 - emax) / 2 - 1 >= e1 / 2 - 1 >= emin. * Otherwise, mpfr_mul didn't overflow, therefore mpfr_add overflowed and e2 = emax, so that e1 > emin (see restriction below). e1 + scale > emin - 1, thus e1 + scale >= emin. 3. e2 + scale <= emax, since scale < 0. */ if (e1 + e2 > MPFR_EXT_EMAX) { scaleop = - (((e1 + e2) - MPFR_EXT_EMAX + 1) / 2); MPFR_ASSERTN (scaleop < 0); } else { /* The addition necessarily overflowed. */ MPFR_ASSERTN (e2 == MPFR_EXT_EMAX); /* The case where e1 = emin and e2 = emax is not supported here. This would mean that the precision of e2 would be huge (and possibly not supported in practice anyway). */ MPFR_ASSERTN (e1 > MPFR_EXT_EMIN); scaleop = -1; } } else /* underflow only (in the multiplication) */ { /* We have e1 + e2 <= emin (so, e1 <= e2 <= 0). We want: (e1 + scale) + (e2 + scale) >= emin + 1, i.e. scale >= (emin + 1 - e1 - e2) / 2. let's take scale = ceil((emin + 1 - e1 - e2) / 2). This is OK, as: 1. 1 <= scale <= emax. 2. e1 + scale >= emin + 1 >= emin. 3. e2 + scale <= scale <= emax. */ MPFR_ASSERTN (e1 <= e2 && e2 <= 0); scaleop = (MPFR_EXT_EMIN + 2 - e1 - e2) / 2; MPFR_ASSERTN (scaleop > 0); } MPFR_ALIAS (sc1, op1, MPFR_SIGN (op1), e1 + scaleop); MPFR_ALIAS (sc2, op2, MPFR_SIGN (op2), e2 + scaleop); op1 = sc1; op2 = sc2; MPFR_LOG_MSG (("Exception in pre-iteration, scale = %" MPFR_EXP_FSPEC "d\n", scaleop)); goto retry; } MPFR_CLEAR_FLAGS (); mpfr_sqrt (u, u, MPFR_RNDN); mpfr_div_2ui (v, v, 1, MPFR_RNDN); scaleit = 0; n = 1; while (mpfr_cmp2 (u, v, &eq) != 0 && eq <= p - 2) { MPFR_BLOCK_DECL (flags2); MPFR_LOG_MSG (("Iteration n = %lu\n", n)); retry2: mpfr_add (vf, u, v, MPFR_RNDN); /* No overflow? */ mpfr_div_2ui (vf, vf, 1, MPFR_RNDN); /* See proof in algorithms.tex */ if (4*eq > p) { mpfr_t w; MPFR_BLOCK_DECL (flags3); MPFR_LOG_MSG (("4*eq > p\n", 0)); /* vf = V(k) */ mpfr_init2 (w, (p + 1) / 2); MPFR_BLOCK (flags3, mpfr_sub (w, v, u, MPFR_RNDN); /* e = V(k-1)-U(k-1) */ mpfr_sqr (w, w, MPFR_RNDN); /* e = e^2 */ mpfr_div_2ui (w, w, 4, MPFR_RNDN); /* e*= (1/2)^2*1/4 */ mpfr_div (w, w, vf, MPFR_RNDN); /* 1/4*e^2/V(k) */ ); if (MPFR_LIKELY (! MPFR_UNDERFLOW (flags3))) { mpfr_sub (v, vf, w, MPFR_RNDN); err = MPFR_GET_EXP (vf) - MPFR_GET_EXP (v); /* 0 or 1 */ mpfr_clear (w); break; } /* There has been an underflow because of the cancellation between V(k-1) and U(k-1). Let's use the conventional method. */ MPFR_LOG_MSG (("4*eq > p -> underflow\n", 0)); mpfr_clear (w); MPFR_CLEAR_UNDERFLOW (); } /* U(k) increases, so that U.V can overflow (but not underflow). */ MPFR_BLOCK (flags2, mpfr_mul (uf, u, v, MPFR_RNDN);); if (MPFR_UNLIKELY (MPFR_OVERFLOW (flags2))) { mpfr_exp_t scale2; scale2 = - (((MPFR_GET_EXP (u) + MPFR_GET_EXP (v)) - MPFR_EXT_EMAX + 1) / 2); MPFR_EXP (u) += scale2; MPFR_EXP (v) += scale2; scaleit += scale2; MPFR_LOG_MSG (("Overflow in iteration n = %lu, scaleit = %" MPFR_EXP_FSPEC "d (%" MPFR_EXP_FSPEC "d)\n", n, scaleit, scale2)); MPFR_CLEAR_OVERFLOW (); goto retry2; } mpfr_sqrt (u, uf, MPFR_RNDN); mpfr_swap (v, vf); n ++; } MPFR_LOG_MSG (("End of iterations (n = %lu)\n", n)); /* the error on v is bounded by (18n+51) ulps, or twice if there was an exponent loss in the final subtraction */ err += MPFR_INT_CEIL_LOG2(18 * n + 51); /* 18n+51 should not overflow since n is about log(p) */ /* we should have n+2 <= 2^(p/4) [see algorithms.tex] */ if (MPFR_LIKELY (MPFR_INT_CEIL_LOG2(n + 2) <= p / 4 && MPFR_CAN_ROUND (v, p - err, q, rnd_mode))) break; /* Stop the loop */ /* Next iteration */ MPFR_ZIV_NEXT (loop, p); s = MPFR_PREC2LIMBS (p); } MPFR_ZIV_FREE (loop); if (MPFR_UNLIKELY ((__gmpfr_flags & (MPFR_FLAGS_ALL ^ MPFR_FLAGS_INEXACT)) != 0)) { MPFR_ASSERTN (! mpfr_overflow_p ()); /* since mpfr_clear_flags */ MPFR_ASSERTN (! mpfr_underflow_p ()); /* since mpfr_clear_flags */ MPFR_ASSERTN (! mpfr_divby0_p ()); /* since mpfr_clear_flags */ MPFR_ASSERTN (! mpfr_nanflag_p ()); /* since mpfr_clear_flags */ } /* Setting of the result */ inexact = mpfr_set (r, v, rnd_mode); MPFR_EXP (r) -= scaleop + scaleit; /* Let's clean */ MPFR_TMP_FREE(marker); MPFR_SAVE_EXPO_FREE (expo); /* From the definition of the AGM, underflow and overflow are not possible. */ return mpfr_check_range (r, inexact, rnd_mode); /* agm(u,v) can be exact for u, v rational only for u=v. Proof (due to Nicolas Brisebarre): it suffices to consider u=1 and v<1. Then 1/AGM(1,v) = 2F1(1/2,1/2,1;1-v^2), and a theorem due to G.V. Chudnovsky states that for x a non-zero algebraic number with |x|<1, then 2F1(1/2,1/2,1;x) and 2F1(-1/2,1/2,1;x) are algebraically independent over Q. */ }