This is autoconf.info, produced by makeinfo version 4.13 from autoconf.texi. This manual (24 April 2012) is for GNU Autoconf (version 2.69), a package for creating scripts to configure source code packages using templates and an M4 macro package. Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover texts, and no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License." INFO-DIR-SECTION Software development START-INFO-DIR-ENTRY * Autoconf: (autoconf). Create source code configuration scripts. END-INFO-DIR-ENTRY INFO-DIR-SECTION Individual utilities START-INFO-DIR-ENTRY * autoscan: (autoconf)autoscan Invocation. Semi-automatic `configure.ac' writing * ifnames: (autoconf)ifnames Invocation. Listing conditionals in source. * autoconf-invocation: (autoconf)autoconf Invocation. How to create configuration scripts * autoreconf: (autoconf)autoreconf Invocation. Remaking multiple `configure' scripts * autoheader: (autoconf)autoheader Invocation. How to create configuration templates * autom4te: (autoconf)autom4te Invocation. The Autoconf executables backbone * configure: (autoconf)configure Invocation. Configuring a package. * autoupdate: (autoconf)autoupdate Invocation. Automatic update of `configure.ac' * config.status: (autoconf)config.status Invocation. Recreating configurations. * testsuite: (autoconf)testsuite Invocation. Running an Autotest test suite. END-INFO-DIR-ENTRY  File: autoconf.info, Node: Top, Next: Introduction, Up: (dir) Autoconf ******** This manual (24 April 2012) is for GNU Autoconf (version 2.69), a package for creating scripts to configure source code packages using templates and an M4 macro package. Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover texts, and no Back-Cover Texts. A copy of the license is included in the section entitled "GNU Free Documentation License." * Menu: * Introduction:: Autoconf's purpose, strengths, and weaknesses * The GNU Build System:: A set of tools for portable software packages * Making configure Scripts:: How to organize and produce Autoconf scripts * Setup:: Initialization and output * Existing Tests:: Macros that check for particular features * Writing Tests:: How to write new feature checks * Results:: What to do with results from feature checks * Programming in M4:: Layers on top of which Autoconf is written * Programming in M4sh:: Shell portability layer * Writing Autoconf Macros:: Adding new macros to Autoconf * Portable Shell:: Shell script portability pitfalls * Portable Make:: Makefile portability pitfalls * Portable C and C++:: C and C++ portability pitfalls * Manual Configuration:: Selecting features that can't be guessed * Site Configuration:: Local defaults for `configure' * Running configure Scripts:: How to use the Autoconf output * config.status Invocation:: Recreating a configuration * Obsolete Constructs:: Kept for backward compatibility * Using Autotest:: Creating portable test suites * FAQ:: Frequent Autoconf Questions, with answers * History:: History of Autoconf * GNU Free Documentation License:: License for copying this manual * Indices:: Indices of symbols, concepts, etc. --- The Detailed Node Listing --- The GNU Build System * Automake:: Escaping makefile hell * Gnulib:: The GNU portability library * Libtool:: Building libraries portably * Pointers:: More info on the GNU build system Making `configure' Scripts * Writing Autoconf Input:: What to put in an Autoconf input file * autoscan Invocation:: Semi-automatic `configure.ac' writing * ifnames Invocation:: Listing the conditionals in source code * autoconf Invocation:: How to create configuration scripts * autoreconf Invocation:: Remaking multiple `configure' scripts Writing `configure.ac' * Shell Script Compiler:: Autoconf as solution of a problem * Autoconf Language:: Programming in Autoconf * Autoconf Input Layout:: Standard organization of `configure.ac' Initialization and Output Files * Initializing configure:: Option processing etc. * Versioning:: Dealing with Autoconf versions * Notices:: Copyright, version numbers in `configure' * Input:: Where Autoconf should find files * Output:: Outputting results from the configuration * Configuration Actions:: Preparing the output based on results * Configuration Files:: Creating output files * Makefile Substitutions:: Using output variables in makefiles * Configuration Headers:: Creating a configuration header file * Configuration Commands:: Running arbitrary instantiation commands * Configuration Links:: Links depending on the configuration * Subdirectories:: Configuring independent packages together * Default Prefix:: Changing the default installation prefix Substitutions in Makefiles * Preset Output Variables:: Output variables that are always set * Installation Directory Variables:: Other preset output variables * Changed Directory Variables:: Warnings about `datarootdir' * Build Directories:: Supporting multiple concurrent compiles * Automatic Remaking:: Makefile rules for configuring Configuration Header Files * Header Templates:: Input for the configuration headers * autoheader Invocation:: How to create configuration templates * Autoheader Macros:: How to specify CPP templates Existing Tests * Common Behavior:: Macros' standard schemes * Alternative Programs:: Selecting between alternative programs * Files:: Checking for the existence of files * Libraries:: Library archives that might be missing * Library Functions:: C library functions that might be missing * Header Files:: Header files that might be missing * Declarations:: Declarations that may be missing * Structures:: Structures or members that might be missing * Types:: Types that might be missing * Compilers and Preprocessors:: Checking for compiling programs * System Services:: Operating system services * Posix Variants:: Special kludges for specific Posix variants * Erlang Libraries:: Checking for the existence of Erlang libraries Common Behavior * Standard Symbols:: Symbols defined by the macros * Default Includes:: Includes used by the generic macros Alternative Programs * Particular Programs:: Special handling to find certain programs * Generic Programs:: How to find other programs Library Functions * Function Portability:: Pitfalls with usual functions * Particular Functions:: Special handling to find certain functions * Generic Functions:: How to find other functions Header Files * Header Portability:: Collected knowledge on common headers * Particular Headers:: Special handling to find certain headers * Generic Headers:: How to find other headers Declarations * Particular Declarations:: Macros to check for certain declarations * Generic Declarations:: How to find other declarations Structures * Particular Structures:: Macros to check for certain structure members * Generic Structures:: How to find other structure members Types * Particular Types:: Special handling to find certain types * Generic Types:: How to find other types Compilers and Preprocessors * Specific Compiler Characteristics:: Some portability issues * Generic Compiler Characteristics:: Language independent tests and features * C Compiler:: Checking its characteristics * C++ Compiler:: Likewise * Objective C Compiler:: Likewise * Objective C++ Compiler:: Likewise * Erlang Compiler and Interpreter:: Likewise * Fortran Compiler:: Likewise * Go Compiler:: Likewise Writing Tests * Language Choice:: Selecting which language to use for testing * Writing Test Programs:: Forging source files for compilers * Running the Preprocessor:: Detecting preprocessor symbols * Running the Compiler:: Detecting language or header features * Running the Linker:: Detecting library features * Runtime:: Testing for runtime features * Systemology:: A zoology of operating systems * Multiple Cases:: Tests for several possible values Writing Test Programs * Guidelines:: General rules for writing test programs * Test Functions:: Avoiding pitfalls in test programs * Generating Sources:: Source program boilerplate Results of Tests * Defining Symbols:: Defining C preprocessor symbols * Setting Output Variables:: Replacing variables in output files * Special Chars in Variables:: Characters to beware of in variables * Caching Results:: Speeding up subsequent `configure' runs * Printing Messages:: Notifying `configure' users Caching Results * Cache Variable Names:: Shell variables used in caches * Cache Files:: Files `configure' uses for caching * Cache Checkpointing:: Loading and saving the cache file Programming in M4 * M4 Quotation:: Protecting macros from unwanted expansion * Using autom4te:: The Autoconf executables backbone * Programming in M4sugar:: Convenient pure M4 macros * Debugging via autom4te:: Figuring out what M4 was doing M4 Quotation * Active Characters:: Characters that change the behavior of M4 * One Macro Call:: Quotation and one macro call * Quoting and Parameters:: M4 vs. shell parameters * Quotation and Nested Macros:: Macros calling macros * Changequote is Evil:: Worse than INTERCAL: M4 + changequote * Quadrigraphs:: Another way to escape special characters * Balancing Parentheses:: Dealing with unbalanced parentheses * Quotation Rule Of Thumb:: One parenthesis, one quote Using `autom4te' * autom4te Invocation:: A GNU M4 wrapper * Customizing autom4te:: Customizing the Autoconf package Programming in M4sugar * Redefined M4 Macros:: M4 builtins changed in M4sugar * Diagnostic Macros:: Diagnostic messages from M4sugar * Diversion support:: Diversions in M4sugar * Conditional constructs:: Conditions in M4 * Looping constructs:: Iteration in M4 * Evaluation Macros:: More quotation and evaluation control * Text processing Macros:: String manipulation in M4 * Number processing Macros:: Arithmetic computation in M4 * Set manipulation Macros:: Set manipulation in M4 * Forbidden Patterns:: Catching unexpanded macros Programming in M4sh * Common Shell Constructs:: Portability layer for common shell constructs * Polymorphic Variables:: Support for indirect variable names * Initialization Macros:: Macros to establish a sane shell environment * File Descriptor Macros:: File descriptor macros for input and output Writing Autoconf Macros * Macro Definitions:: Basic format of an Autoconf macro * Macro Names:: What to call your new macros * Reporting Messages:: Notifying `autoconf' users * Dependencies Between Macros:: What to do when macros depend on other macros * Obsoleting Macros:: Warning about old ways of doing things * Coding Style:: Writing Autoconf macros a` la Autoconf Dependencies Between Macros * Prerequisite Macros:: Ensuring required information * Suggested Ordering:: Warning about possible ordering problems * One-Shot Macros:: Ensuring a macro is called only once Portable Shell Programming * Shellology:: A zoology of shells * Invoking the Shell:: Invoking the shell as a command * Here-Documents:: Quirks and tricks * File Descriptors:: FDs and redirections * Signal Handling:: Shells, signals, and headaches * File System Conventions:: File names * Shell Pattern Matching:: Pattern matching * Shell Substitutions:: Variable and command expansions * Assignments:: Varying side effects of assignments * Parentheses:: Parentheses in shell scripts * Slashes:: Slashes in shell scripts * Special Shell Variables:: Variables you should not change * Shell Functions:: What to look out for if you use them * Limitations of Builtins:: Portable use of not so portable /bin/sh * Limitations of Usual Tools:: Portable use of portable tools Portable Make Programming * $< in Ordinary Make Rules:: $< in ordinary rules * Failure in Make Rules:: Failing portably in rules * Special Chars in Names:: Special Characters in Macro Names * Backslash-Newline-Empty:: Empty lines after backslash-newline * Backslash-Newline Comments:: Spanning comments across line boundaries * Long Lines in Makefiles:: Line length limitations * Macros and Submakes:: `make macro=value' and submakes * The Make Macro MAKEFLAGS:: `$(MAKEFLAGS)' portability issues * The Make Macro SHELL:: `$(SHELL)' portability issues * Parallel Make:: Parallel `make' quirks * Comments in Make Rules:: Other problems with Make comments * Newlines in Make Rules:: Using literal newlines in rules * Comments in Make Macros:: Other problems with Make comments in macros * Trailing whitespace in Make Macros:: Macro substitution problems * Command-line Macros and whitespace:: Whitespace trimming of values * obj/ and Make:: Don't name a subdirectory `obj' * make -k Status:: Exit status of `make -k' * VPATH and Make:: `VPATH' woes * Single Suffix Rules:: Single suffix rules and separated dependencies * Timestamps and Make:: Subsecond timestamp resolution `VPATH' and Make * Variables listed in VPATH:: `VPATH' must be literal on ancient hosts * VPATH and Double-colon:: Problems with `::' on ancient hosts * $< in Explicit Rules:: `$<' does not work in ordinary rules * Automatic Rule Rewriting:: `VPATH' goes wild on Solaris * Tru64 Directory Magic:: `mkdir' goes wild on Tru64 * Make Target Lookup:: More details about `VPATH' lookup Portable C and C++ Programming * Varieties of Unportability:: How to make your programs unportable * Integer Overflow:: When integers get too large * Preprocessor Arithmetic:: `#if' expression problems * Null Pointers:: Properties of null pointers * Buffer Overruns:: Subscript errors and the like * Volatile Objects:: `volatile' and signals * Floating Point Portability:: Portable floating-point arithmetic * Exiting Portably:: Exiting and the exit status Integer Overflow * Integer Overflow Basics:: Why integer overflow is a problem * Signed Overflow Examples:: Examples of code assuming wraparound * Optimization and Wraparound:: Optimizations that break uses of wraparound * Signed Overflow Advice:: Practical advice for signed overflow issues * Signed Integer Division:: `INT_MIN / -1' and `INT_MIN % -1' Manual Configuration * Specifying Target Triplets:: Specifying target triplets * Canonicalizing:: Getting the canonical system type * Using System Type:: What to do with the system type Site Configuration * Help Formatting:: Customizing `configure --help' * External Software:: Working with other optional software * Package Options:: Selecting optional features * Pretty Help Strings:: Formatting help string * Option Checking:: Controlling checking of `configure' options * Site Details:: Configuring site details * Transforming Names:: Changing program names when installing * Site Defaults:: Giving `configure' local defaults Transforming Program Names When Installing * Transformation Options:: `configure' options to transform names * Transformation Examples:: Sample uses of transforming names * Transformation Rules:: Makefile uses of transforming names Running `configure' Scripts * Basic Installation:: Instructions for typical cases * Compilers and Options:: Selecting compilers and optimization * Multiple Architectures:: Compiling for multiple architectures at once * Installation Names:: Installing in different directories * Optional Features:: Selecting optional features * Particular Systems:: Particular systems * System Type:: Specifying the system type * Sharing Defaults:: Setting site-wide defaults for `configure' * Defining Variables:: Specifying the compiler etc. * configure Invocation:: Changing how `configure' runs Obsolete Constructs * Obsolete config.status Use:: Obsolete convention for `config.status' * acconfig Header:: Additional entries in `config.h.in' * autoupdate Invocation:: Automatic update of `configure.ac' * Obsolete Macros:: Backward compatibility macros * Autoconf 1:: Tips for upgrading your files * Autoconf 2.13:: Some fresher tips Upgrading From Version 1 * Changed File Names:: Files you might rename * Changed Makefiles:: New things to put in `Makefile.in' * Changed Macros:: Macro calls you might replace * Changed Results:: Changes in how to check test results * Changed Macro Writing:: Better ways to write your own macros Upgrading From Version 2.13 * Changed Quotation:: Broken code which used to work * New Macros:: Interaction with foreign macros * Hosts and Cross-Compilation:: Bugward compatibility kludges * AC_LIBOBJ vs LIBOBJS:: LIBOBJS is a forbidden token * AC_ACT_IFELSE vs AC_TRY_ACT:: A more generic scheme for testing sources Generating Test Suites with Autotest * Using an Autotest Test Suite:: Autotest and the user * Writing Testsuites:: Autotest macros * testsuite Invocation:: Running `testsuite' scripts * Making testsuite Scripts:: Using autom4te to create `testsuite' Using an Autotest Test Suite * testsuite Scripts:: The concepts of Autotest * Autotest Logs:: Their contents Frequent Autoconf Questions, with answers * Distributing:: Distributing `configure' scripts * Why GNU M4:: Why not use the standard M4? * Bootstrapping:: Autoconf and GNU M4 require each other? * Why Not Imake:: Why GNU uses `configure' instead of Imake * Defining Directories:: Passing `datadir' to program * Autom4te Cache:: What is it? Can I remove it? * Present But Cannot Be Compiled:: Compiler and Preprocessor Disagree * Expanded Before Required:: Expanded Before Required * Debugging:: Debugging `configure' scripts History of Autoconf * Genesis:: Prehistory and naming of `configure' * Exodus:: The plagues of M4 and Perl * Leviticus:: The priestly code of portability arrives * Numbers:: Growth and contributors * Deuteronomy:: Approaching the promises of easy configuration Indices * Environment Variable Index:: Index of environment variables used * Output Variable Index:: Index of variables set in output files * Preprocessor Symbol Index:: Index of C preprocessor symbols defined * Cache Variable Index:: Index of documented cache variables * Autoconf Macro Index:: Index of Autoconf macros * M4 Macro Index:: Index of M4, M4sugar, and M4sh macros * Autotest Macro Index:: Index of Autotest macros * Program & Function Index:: Index of those with portability problems * Concept Index:: General index  File: autoconf.info, Node: Introduction, Next: The GNU Build System, Prev: Top, Up: Top 1 Introduction ************** A physicist, an engineer, and a computer scientist were discussing the nature of God. "Surely a Physicist," said the physicist, "because early in the Creation, God made Light; and you know, Maxwell's equations, the dual nature of electromagnetic waves, the relativistic consequences..." "An Engineer!," said the engineer, "because before making Light, God split the Chaos into Land and Water; it takes a hell of an engineer to handle that big amount of mud, and orderly separation of solids from liquids..." The computer scientist shouted: "And the Chaos, where do you think it was coming from, hmm?" --Anonymous Autoconf is a tool for producing shell scripts that automatically configure software source code packages to adapt to many kinds of Posix-like systems. The configuration scripts produced by Autoconf are independent of Autoconf when they are run, so their users do not need to have Autoconf. The configuration scripts produced by Autoconf require no manual user intervention when run; they do not normally even need an argument specifying the system type. Instead, they individually test for the presence of each feature that the software package they are for might need. (Before each check, they print a one-line message stating what they are checking for, so the user doesn't get too bored while waiting for the script to finish.) As a result, they deal well with systems that are hybrids or customized from the more common Posix variants. There is no need to maintain files that list the features supported by each release of each variant of Posix. For each software package that Autoconf is used with, it creates a configuration script from a template file that lists the system features that the package needs or can use. After the shell code to recognize and respond to a system feature has been written, Autoconf allows it to be shared by many software packages that can use (or need) that feature. If it later turns out that the shell code needs adjustment for some reason, it needs to be changed in only one place; all of the configuration scripts can be regenerated automatically to take advantage of the updated code. Those who do not understand Autoconf are condemned to reinvent it, poorly. The primary goal of Autoconf is making the _user's_ life easier; making the _maintainer's_ life easier is only a secondary goal. Put another way, the primary goal is not to make the generation of `configure' automatic for package maintainers (although patches along that front are welcome, since package maintainers form the user base of Autoconf); rather, the goal is to make `configure' painless, portable, and predictable for the end user of each "autoconfiscated" package. And to this degree, Autoconf is highly successful at its goal -- most complaints to the Autoconf list are about difficulties in writing Autoconf input, and not in the behavior of the resulting `configure'. Even packages that don't use Autoconf will generally provide a `configure' script, and the most common complaint about these alternative home-grown scripts is that they fail to meet one or more of the GNU Coding Standards (*note Configuration: (standards)Configuration.) that users have come to expect from Autoconf-generated `configure' scripts. The Metaconfig package is similar in purpose to Autoconf, but the scripts it produces require manual user intervention, which is quite inconvenient when configuring large source trees. Unlike Metaconfig scripts, Autoconf scripts can support cross-compiling, if some care is taken in writing them. Autoconf does not solve all problems related to making portable software packages--for a more complete solution, it should be used in concert with other GNU build tools like Automake and Libtool. These other tools take on jobs like the creation of a portable, recursive makefile with all of the standard targets, linking of shared libraries, and so on. *Note The GNU Build System::, for more information. Autoconf imposes some restrictions on the names of macros used with `#if' in C programs (*note Preprocessor Symbol Index::). Autoconf requires GNU M4 version 1.4.6 or later in order to generate the scripts. It uses features that some versions of M4, including GNU M4 1.3, do not have. Autoconf works better with GNU M4 version 1.4.14 or later, though this is not required. *Note Autoconf 1::, for information about upgrading from version 1. *Note History::, for the story of Autoconf's development. *Note FAQ::, for answers to some common questions about Autoconf. See the Autoconf web page (http://www.gnu.org/software/autoconf/) for up-to-date information, details on the mailing lists, pointers to a list of known bugs, etc. Mail suggestions to the Autoconf mailing list . Past suggestions are archived (http://lists.gnu.org/archive/html/autoconf/). Mail bug reports to the Autoconf Bugs mailing list . Past bug reports are archived (http://lists.gnu.org/archive/html/bug-autoconf/). If possible, first check that your bug is not already solved in current development versions, and that it has not been reported yet. Be sure to include all the needed information and a short `configure.ac' that demonstrates the problem. Autoconf's development tree is accessible via `git'; see the Autoconf Summary (http://savannah.gnu.org/projects/autoconf/) for details, or view the actual repository (http://git.sv.gnu.org/gitweb/?p=autoconf.git). Anonymous CVS access is also available, see `README' for more details. Patches relative to the current `git' version can be sent for review to the Autoconf Patches mailing list , with discussion on prior patches archived (http://lists.gnu.org/archive/html/autoconf-patches/); and all commits are posted in the read-only Autoconf Commit mailing list , which is also archived (http://lists.gnu.org/archive/html/autoconf-commit/). Because of its mission, the Autoconf package itself includes only a set of often-used macros that have already demonstrated their usefulness. Nevertheless, if you wish to share your macros, or find existing ones, see the Autoconf Macro Archive (http://www.gnu.org/software/autoconf-archive/), which is kindly run by Peter Simons .  File: autoconf.info, Node: The GNU Build System, Next: Making configure Scripts, Prev: Introduction, Up: Top 2 The GNU Build System ********************** Autoconf solves an important problem--reliable discovery of system-specific build and runtime information--but this is only one piece of the puzzle for the development of portable software. To this end, the GNU project has developed a suite of integrated utilities to finish the job Autoconf started: the GNU build system, whose most important components are Autoconf, Automake, and Libtool. In this chapter, we introduce you to those tools, point you to sources of more information, and try to convince you to use the entire GNU build system for your software. * Menu: * Automake:: Escaping makefile hell * Gnulib:: The GNU portability library * Libtool:: Building libraries portably * Pointers:: More info on the GNU build system  File: autoconf.info, Node: Automake, Next: Gnulib, Up: The GNU Build System 2.1 Automake ============ The ubiquity of `make' means that a makefile is almost the only viable way to distribute automatic build rules for software, but one quickly runs into its numerous limitations. Its lack of support for automatic dependency tracking, recursive builds in subdirectories, reliable timestamps (e.g., for network file systems), and so on, mean that developers must painfully (and often incorrectly) reinvent the wheel for each project. Portability is non-trivial, thanks to the quirks of `make' on many systems. On top of all this is the manual labor required to implement the many standard targets that users have come to expect (`make install', `make distclean', `make uninstall', etc.). Since you are, of course, using Autoconf, you also have to insert repetitive code in your `Makefile.in' to recognize `@CC@', `@CFLAGS@', and other substitutions provided by `configure'. Into this mess steps "Automake". Automake allows you to specify your build needs in a `Makefile.am' file with a vastly simpler and more powerful syntax than that of a plain makefile, and then generates a portable `Makefile.in' for use with Autoconf. For example, the `Makefile.am' to build and install a simple "Hello world" program might look like: bin_PROGRAMS = hello hello_SOURCES = hello.c The resulting `Makefile.in' (~400 lines) automatically supports all the standard targets, the substitutions provided by Autoconf, automatic dependency tracking, `VPATH' building, and so on. `make' builds the `hello' program, and `make install' installs it in `/usr/local/bin' (or whatever prefix was given to `configure', if not `/usr/local'). The benefits of Automake increase for larger packages (especially ones with subdirectories), but even for small programs the added convenience and portability can be substantial. And that's not all...  File: autoconf.info, Node: Gnulib, Next: Libtool, Prev: Automake, Up: The GNU Build System 2.2 Gnulib ========== GNU software has a well-deserved reputation for running on many different types of systems. While our primary goal is to write software for the GNU system, many users and developers have been introduced to us through the systems that they were already using. Gnulib is a central location for common GNU code, intended to be shared among free software packages. Its components are typically shared at the source level, rather than being a library that gets built, installed, and linked against. The idea is to copy files from Gnulib into your own source tree. There is no distribution tarball; developers should just grab source modules from the repository. The source files are available online, under various licenses, mostly GNU GPL or GNU LGPL. Gnulib modules typically contain C source code along with Autoconf macros used to configure the source code. For example, the Gnulib `stdbool' module implements a `stdbool.h' header that nearly conforms to C99, even on old-fashioned hosts that lack `stdbool.h'. This module contains a source file for the replacement header, along with an Autoconf macro that arranges to use the replacement header on old-fashioned systems.  File: autoconf.info, Node: Libtool, Next: Pointers, Prev: Gnulib, Up: The GNU Build System 2.3 Libtool =========== Often, one wants to build not only programs, but libraries, so that other programs can benefit from the fruits of your labor. Ideally, one would like to produce _shared_ (dynamically linked) libraries, which can be used by multiple programs without duplication on disk or in memory and can be updated independently of the linked programs. Producing shared libraries portably, however, is the stuff of nightmares--each system has its own incompatible tools, compiler flags, and magic incantations. Fortunately, GNU provides a solution: "Libtool". Libtool handles all the requirements of building shared libraries for you, and at this time seems to be the _only_ way to do so with any portability. It also handles many other headaches, such as: the interaction of Make rules with the variable suffixes of shared libraries, linking reliably with shared libraries before they are installed by the superuser, and supplying a consistent versioning system (so that different versions of a library can be installed or upgraded without breaking binary compatibility). Although Libtool, like Autoconf, can be used without Automake, it is most simply utilized in conjunction with Automake--there, Libtool is used automatically whenever shared libraries are needed, and you need not know its syntax.  File: autoconf.info, Node: Pointers, Prev: Libtool, Up: The GNU Build System 2.4 Pointers ============ Developers who are used to the simplicity of `make' for small projects on a single system might be daunted at the prospect of learning to use Automake and Autoconf. As your software is distributed to more and more users, however, you otherwise quickly find yourself putting lots of effort into reinventing the services that the GNU build tools provide, and making the same mistakes that they once made and overcame. (Besides, since you're already learning Autoconf, Automake is a piece of cake.) There are a number of places that you can go to for more information on the GNU build tools. - Web The project home pages for Autoconf (http://www.gnu.org/software/autoconf/), Automake (http://www.gnu.org/software/automake/), Gnulib (http://www.gnu.org/software/gnulib/), and Libtool (http://www.gnu.org/software/libtool/). - Automake Manual *Note Automake: (automake)Top, for more information on Automake. - Books The book `GNU Autoconf, Automake and Libtool'(1) describes the complete GNU build environment. You can also find the entire book on-line (http://sources.redhat.com/autobook/). ---------- Footnotes ---------- (1) `GNU Autoconf, Automake and Libtool', by G. V. Vaughan, B. Elliston, T. Tromey, and I. L. Taylor. SAMS (originally New Riders), 2000, ISBN 1578701902.  File: autoconf.info, Node: Making configure Scripts, Next: Setup, Prev: The GNU Build System, Up: Top 3 Making `configure' Scripts **************************** The configuration scripts that Autoconf produces are by convention called `configure'. When run, `configure' creates several files, replacing configuration parameters in them with appropriate values. The files that `configure' creates are: - one or more `Makefile' files, usually one in each subdirectory of the package (*note Makefile Substitutions::); - optionally, a C header file, the name of which is configurable, containing `#define' directives (*note Configuration Headers::); - a shell script called `config.status' that, when run, recreates the files listed above (*note config.status Invocation::); - an optional shell script normally called `config.cache' (created when using `configure --config-cache') that saves the results of running many of the tests (*note Cache Files::); - a file called `config.log' containing any messages produced by compilers, to help debugging if `configure' makes a mistake. To create a `configure' script with Autoconf, you need to write an Autoconf input file `configure.ac' (or `configure.in') and run `autoconf' on it. If you write your own feature tests to supplement those that come with Autoconf, you might also write files called `aclocal.m4' and `acsite.m4'. If you use a C header file to contain `#define' directives, you might also run `autoheader', and you can distribute the generated file `config.h.in' with the package. Here is a diagram showing how the files that can be used in configuration are produced. Programs that are executed are suffixed by `*'. Optional files are enclosed in square brackets (`[]'). `autoconf' and `autoheader' also read the installed Autoconf macro files (by reading `autoconf.m4'). Files used in preparing a software package for distribution, when using just Autoconf: your source files --> [autoscan*] --> [configure.scan] --> configure.ac configure.ac --. | .------> autoconf* -----> configure [aclocal.m4] --+---+ | `-----> [autoheader*] --> [config.h.in] [acsite.m4] ---' Makefile.in Additionally, if you use Automake, the following additional productions come into play: [acinclude.m4] --. | [local macros] --+--> aclocal* --> aclocal.m4 | configure.ac ----' configure.ac --. +--> automake* --> Makefile.in Makefile.am ---' Files used in configuring a software package: .-------------> [config.cache] configure* ------------+-------------> config.log | [config.h.in] -. v .-> [config.h] -. +--> config.status* -+ +--> make* Makefile.in ---' `-> Makefile ---' * Menu: * Writing Autoconf Input:: What to put in an Autoconf input file * autoscan Invocation:: Semi-automatic `configure.ac' writing * ifnames Invocation:: Listing the conditionals in source code * autoconf Invocation:: How to create configuration scripts * autoreconf Invocation:: Remaking multiple `configure' scripts  File: autoconf.info, Node: Writing Autoconf Input, Next: autoscan Invocation, Up: Making configure Scripts 3.1 Writing `configure.ac' ========================== To produce a `configure' script for a software package, create a file called `configure.ac' that contains invocations of the Autoconf macros that test the system features your package needs or can use. Autoconf macros already exist to check for many features; see *note Existing Tests::, for their descriptions. For most other features, you can use Autoconf template macros to produce custom checks; see *note Writing Tests::, for information about them. For especially tricky or specialized features, `configure.ac' might need to contain some hand-crafted shell commands; see *note Portable Shell Programming: Portable Shell. The `autoscan' program can give you a good start in writing `configure.ac' (*note autoscan Invocation::, for more information). Previous versions of Autoconf promoted the name `configure.in', which is somewhat ambiguous (the tool needed to process this file is not described by its extension), and introduces a slight confusion with `config.h.in' and so on (for which `.in' means "to be processed by `configure'"). Using `configure.ac' is now preferred. * Menu: * Shell Script Compiler:: Autoconf as solution of a problem * Autoconf Language:: Programming in Autoconf * Autoconf Input Layout:: Standard organization of `configure.ac'  File: autoconf.info, Node: Shell Script Compiler, Next: Autoconf Language, Up: Writing Autoconf Input 3.1.1 A Shell Script Compiler ----------------------------- Just as for any other computer language, in order to properly program `configure.ac' in Autoconf you must understand _what_ problem the language tries to address and _how_ it does so. The problem Autoconf addresses is that the world is a mess. After all, you are using Autoconf in order to have your package compile easily on all sorts of different systems, some of them being extremely hostile. Autoconf itself bears the price for these differences: `configure' must run on all those systems, and thus `configure' must limit itself to their lowest common denominator of features. Naturally, you might then think of shell scripts; who needs `autoconf'? A set of properly written shell functions is enough to make it easy to write `configure' scripts by hand. Sigh! Unfortunately, even in 2008, where shells without any function support are far and few between, there are pitfalls to avoid when making use of them. Also, finding a Bourne shell that accepts shell functions is not trivial, even though there is almost always one on interesting porting targets. So, what is really needed is some kind of compiler, `autoconf', that takes an Autoconf program, `configure.ac', and transforms it into a portable shell script, `configure'. How does `autoconf' perform this task? There are two obvious possibilities: creating a brand new language or extending an existing one. The former option is attractive: all sorts of optimizations could easily be implemented in the compiler and many rigorous checks could be performed on the Autoconf program (e.g., rejecting any non-portable construct). Alternatively, you can extend an existing language, such as the `sh' (Bourne shell) language. Autoconf does the latter: it is a layer on top of `sh'. It was therefore most convenient to implement `autoconf' as a macro expander: a program that repeatedly performs "macro expansions" on text input, replacing macro calls with macro bodies and producing a pure `sh' script in the end. Instead of implementing a dedicated Autoconf macro expander, it is natural to use an existing general-purpose macro language, such as M4, and implement the extensions as a set of M4 macros.  File: autoconf.info, Node: Autoconf Language, Next: Autoconf Input Layout, Prev: Shell Script Compiler, Up: Writing Autoconf Input 3.1.2 The Autoconf Language --------------------------- The Autoconf language differs from many other computer languages because it treats actual code the same as plain text. Whereas in C, for instance, data and instructions have different syntactic status, in Autoconf their status is rigorously the same. Therefore, we need a means to distinguish literal strings from text to be expanded: quotation. When calling macros that take arguments, there must not be any white space between the macro name and the open parenthesis. AC_INIT ([oops], [1.0]) # incorrect AC_INIT([hello], [1.0]) # good Arguments should be enclosed within the quote characters `[' and `]', and be separated by commas. Any leading blanks or newlines in arguments are ignored, unless they are quoted. You should always quote an argument that might contain a macro name, comma, parenthesis, or a leading blank or newline. This rule applies recursively for every macro call, including macros called from other macros. For more details on quoting rules, see *note Programming in M4::. For instance: AC_CHECK_HEADER([stdio.h], [AC_DEFINE([HAVE_STDIO_H], [1], [Define to 1 if you have .])], [AC_MSG_ERROR([sorry, can't do anything for you])]) is quoted properly. You may safely simplify its quotation to: AC_CHECK_HEADER([stdio.h], [AC_DEFINE([HAVE_STDIO_H], 1, [Define to 1 if you have .])], [AC_MSG_ERROR([sorry, can't do anything for you])]) because `1' cannot contain a macro call. Here, the argument of `AC_MSG_ERROR' must be quoted; otherwise, its comma would be interpreted as an argument separator. Also, the second and third arguments of `AC_CHECK_HEADER' must be quoted, since they contain macro calls. The three arguments `HAVE_STDIO_H', `stdio.h', and `Define to 1 if you have .' do not need quoting, but if you unwisely defined a macro with a name like `Define' or `stdio' then they would need quoting. Cautious Autoconf users would keep the quotes, but many Autoconf users find such precautions annoying, and would rewrite the example as follows: AC_CHECK_HEADER(stdio.h, [AC_DEFINE(HAVE_STDIO_H, 1, [Define to 1 if you have .])], [AC_MSG_ERROR([sorry, can't do anything for you])]) This is safe, so long as you adopt good naming conventions and do not define macros with names like `HAVE_STDIO_H', `stdio', or `h'. Though it is also safe here to omit the quotes around `Define to 1 if you have .' this is not recommended, as message strings are more likely to inadvertently contain commas. The following example is wrong and dangerous, as it is underquoted: AC_CHECK_HEADER(stdio.h, AC_DEFINE(HAVE_STDIO_H, 1, Define to 1 if you have .), AC_MSG_ERROR([sorry, can't do anything for you])) In other cases, you may have to use text that also resembles a macro call. You must quote that text even when it is not passed as a macro argument. For example, these two approaches in `configure.ac' (quoting just the potential problems, or quoting the entire line) will protect your script in case autoconf ever adds a macro `AC_DC': echo "Hard rock was here! --[AC_DC]" [echo "Hard rock was here! --AC_DC"] which results in this text in `configure': echo "Hard rock was here! --AC_DC" echo "Hard rock was here! --AC_DC" When you use the same text in a macro argument, you must therefore have an extra quotation level (since one is stripped away by the macro substitution). In general, then, it is a good idea to _use double quoting for all literal string arguments_, either around just the problematic portions, or over the entire argument: AC_MSG_WARN([[AC_DC] stinks --Iron Maiden]) AC_MSG_WARN([[AC_DC stinks --Iron Maiden]]) However, the above example triggers a warning about a possibly unexpanded macro when running `autoconf', because it collides with the namespace of macros reserved for the Autoconf language. To be really safe, you can use additional escaping (either a quadrigraph, or creative shell constructs) to silence that particular warning: echo "Hard rock was here! --AC""_DC" AC_MSG_WARN([[AC@&t@_DC stinks --Iron Maiden]]) You are now able to understand one of the constructs of Autoconf that has been continually misunderstood... The rule of thumb is that _whenever you expect macro expansion, expect quote expansion_; i.e., expect one level of quotes to be lost. For instance: AC_COMPILE_IFELSE(AC_LANG_SOURCE([char b[10];]), [], [AC_MSG_ERROR([you lose])]) is incorrect: here, the first argument of `AC_LANG_SOURCE' is `char b[10];' and is expanded once, which results in `char b10;'; and the `AC_LANG_SOURCE' is also expanded prior to being passed to `AC_COMPILE_IFELSE'. (There was an idiom common in Autoconf's past to address this issue via the M4 `changequote' primitive, but do not use it!) Let's take a closer look: the author meant the first argument to be understood as a literal, and therefore it must be quoted twice; likewise, the intermediate `AC_LANG_SOURCE' macro should be quoted once so that it is only expanded after the rest of the body of `AC_COMPILE_IFELSE' is in place: AC_COMPILE_IFELSE([AC_LANG_SOURCE([[char b[10];]])], [], [AC_MSG_ERROR([you lose])]) Voila`, you actually produce `char b[10];' this time! On the other hand, descriptions (e.g., the last parameter of `AC_DEFINE' or `AS_HELP_STRING') are not literals--they are subject to line breaking, for example--and should not be double quoted. Even if these descriptions are short and are not actually broken, double quoting them yields weird results. Some macros take optional arguments, which this documentation represents as [ARG] (not to be confused with the quote characters). You may just leave them empty, or use `[]' to make the emptiness of the argument explicit, or you may simply omit the trailing commas. The three lines below are equivalent: AC_CHECK_HEADERS([stdio.h], [], [], []) AC_CHECK_HEADERS([stdio.h],,,) AC_CHECK_HEADERS([stdio.h]) It is best to put each macro call on its own line in `configure.ac'. Most of the macros don't add extra newlines; they rely on the newline after the macro call to terminate the commands. This approach makes the generated `configure' script a little easier to read by not inserting lots of blank lines. It is generally safe to set shell variables on the same line as a macro call, because the shell allows assignments without intervening newlines. You can include comments in `configure.ac' files by starting them with the `#'. For example, it is helpful to begin `configure.ac' files with a line like this: # Process this file with autoconf to produce a configure script.  File: autoconf.info, Node: Autoconf Input Layout, Prev: Autoconf Language, Up: Writing Autoconf Input 3.1.3 Standard `configure.ac' Layout ------------------------------------ The order in which `configure.ac' calls the Autoconf macros is not important, with a few exceptions. Every `configure.ac' must contain a call to `AC_INIT' before the checks, and a call to `AC_OUTPUT' at the end (*note Output::). Additionally, some macros rely on other macros having been called first, because they check previously set values of some variables to decide what to do. These macros are noted in the individual descriptions (*note Existing Tests::), and they also warn you when `configure' is created if they are called out of order. To encourage consistency, here is a suggested order for calling the Autoconf macros. Generally speaking, the things near the end of this list are those that could depend on things earlier in it. For example, library functions could be affected by types and libraries. Autoconf requirements `AC_INIT(PACKAGE, VERSION, BUG-REPORT-ADDRESS)' information on the package checks for programs checks for libraries checks for header files checks for types checks for structures checks for compiler characteristics checks for library functions checks for system services `AC_CONFIG_FILES([FILE...])' `AC_OUTPUT'  File: autoconf.info, Node: autoscan Invocation, Next: ifnames Invocation, Prev: Writing Autoconf Input, Up: Making configure Scripts 3.2 Using `autoscan' to Create `configure.ac' ============================================= The `autoscan' program can help you create and/or maintain a `configure.ac' file for a software package. `autoscan' examines source files in the directory tree rooted at a directory given as a command line argument, or the current directory if none is given. It searches the source files for common portability problems and creates a file `configure.scan' which is a preliminary `configure.ac' for that package, and checks a possibly existing `configure.ac' for completeness. When using `autoscan' to create a `configure.ac', you should manually examine `configure.scan' before renaming it to `configure.ac'; it probably needs some adjustments. Occasionally, `autoscan' outputs a macro in the wrong order relative to another macro, so that `autoconf' produces a warning; you need to move such macros manually. Also, if you want the package to use a configuration header file, you must add a call to `AC_CONFIG_HEADERS' (*note Configuration Headers::). You might also have to change or add some `#if' directives to your program in order to make it work with Autoconf (*note ifnames Invocation::, for information about a program that can help with that job). When using `autoscan' to maintain a `configure.ac', simply consider adding its suggestions. The file `autoscan.log' contains detailed information on why a macro is requested. `autoscan' uses several data files (installed along with Autoconf) to determine which macros to output when it finds particular symbols in a package's source files. These data files all have the same format: each line consists of a symbol, one or more blanks, and the Autoconf macro to output if that symbol is encountered. Lines starting with `#' are comments. `autoscan' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' `-v' Print the names of the files it examines and the potentially interesting symbols it finds in them. This output can be voluminous. `--debug' `-d' Don't remove temporary files. `--include=DIR' `-I DIR' Append DIR to the include path. Multiple invocations accumulate. `--prepend-include=DIR' `-B DIR' Prepend DIR to the include path. Multiple invocations accumulate.  File: autoconf.info, Node: ifnames Invocation, Next: autoconf Invocation, Prev: autoscan Invocation, Up: Making configure Scripts 3.3 Using `ifnames' to List Conditionals ======================================== `ifnames' can help you write `configure.ac' for a software package. It prints the identifiers that the package already uses in C preprocessor conditionals. If a package has already been set up to have some portability, `ifnames' can thus help you figure out what its `configure' needs to check for. It may help fill in some gaps in a `configure.ac' generated by `autoscan' (*note autoscan Invocation::). `ifnames' scans all of the C source files named on the command line (or the standard input, if none are given) and writes to the standard output a sorted list of all the identifiers that appear in those files in `#if', `#elif', `#ifdef', or `#ifndef' directives. It prints each identifier on a line, followed by a space-separated list of the files in which that identifier occurs. `ifnames' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit.  File: autoconf.info, Node: autoconf Invocation, Next: autoreconf Invocation, Prev: ifnames Invocation, Up: Making configure Scripts 3.4 Using `autoconf' to Create `configure' ========================================== To create `configure' from `configure.ac', run the `autoconf' program with no arguments. `autoconf' processes `configure.ac' with the M4 macro processor, using the Autoconf macros. If you give `autoconf' an argument, it reads that file instead of `configure.ac' and writes the configuration script to the standard output instead of to `configure'. If you give `autoconf' the argument `-', it reads from the standard input instead of `configure.ac' and writes the configuration script to the standard output. The Autoconf macros are defined in several files. Some of the files are distributed with Autoconf; `autoconf' reads them first. Then it looks for the optional file `acsite.m4' in the directory that contains the distributed Autoconf macro files, and for the optional file `aclocal.m4' in the current directory. Those files can contain your site's or the package's own Autoconf macro definitions (*note Writing Autoconf Macros::, for more information). If a macro is defined in more than one of the files that `autoconf' reads, the last definition it reads overrides the earlier ones. `autoconf' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' `-v' Report processing steps. `--debug' `-d' Don't remove the temporary files. `--force' `-f' Remake `configure' even if newer than its input files. `--include=DIR' `-I DIR' Append DIR to the include path. Multiple invocations accumulate. `--prepend-include=DIR' `-B DIR' Prepend DIR to the include path. Multiple invocations accumulate. `--output=FILE' `-o FILE' Save output (script or trace) to FILE. The file `-' stands for the standard output. `--warnings=CATEGORY' `-W CATEGORY' Report the warnings related to CATEGORY (which can actually be a comma separated list). *Note Reporting Messages::, macro `AC_DIAGNOSE', for a comprehensive list of categories. Special values include: `all' report all the warnings `none' report none `error' treats warnings as errors `no-CATEGORY' disable warnings falling into CATEGORY Warnings about `syntax' are enabled by default, and the environment variable `WARNINGS', a comma separated list of categories, is honored as well. Passing `-W CATEGORY' actually behaves as if you had passed `--warnings syntax,$WARNINGS,CATEGORY'. To disable the defaults and `WARNINGS', and then enable warnings about obsolete constructs, use `-W none,obsolete'. Because `autoconf' uses `autom4te' behind the scenes, it displays a back trace for errors, but not for warnings; if you want them, just pass `-W error'. *Note autom4te Invocation::, for some examples. `--trace=MACRO[:FORMAT]' `-t MACRO[:FORMAT]' Do not create the `configure' script, but list the calls to MACRO according to the FORMAT. Multiple `--trace' arguments can be used to list several macros. Multiple `--trace' arguments for a single macro are not cumulative; instead, you should just make FORMAT as long as needed. The FORMAT is a regular string, with newlines if desired, and several special escape codes. It defaults to `$f:$l:$n:$%'; see *note autom4te Invocation::, for details on the FORMAT. `--initialization' `-i' By default, `--trace' does not trace the initialization of the Autoconf macros (typically the `AC_DEFUN' definitions). This results in a noticeable speedup, but can be disabled by this option. It is often necessary to check the content of a `configure.ac' file, but parsing it yourself is extremely fragile and error-prone. It is suggested that you rely upon `--trace' to scan `configure.ac'. For instance, to find the list of variables that are substituted, use: $ autoconf -t AC_SUBST configure.ac:2:AC_SUBST:ECHO_C configure.ac:2:AC_SUBST:ECHO_N configure.ac:2:AC_SUBST:ECHO_T More traces deleted The example below highlights the difference between `$@', `$*', and `$%'. $ cat configure.ac AC_DEFINE(This, is, [an [example]]) $ autoconf -t 'AC_DEFINE:@: $@ *: $* %: $%' @: [This],[is],[an [example]] *: This,is,an [example] %: This:is:an [example] The FORMAT gives you a lot of freedom: $ autoconf -t 'AC_SUBST:$$ac_subst{"$1"} = "$f:$l";' $ac_subst{"ECHO_C"} = "configure.ac:2"; $ac_subst{"ECHO_N"} = "configure.ac:2"; $ac_subst{"ECHO_T"} = "configure.ac:2"; More traces deleted A long SEPARATOR can be used to improve the readability of complex structures, and to ease their parsing (for instance when no single character is suitable as a separator): $ autoconf -t 'AM_MISSING_PROG:${|:::::|}*' ACLOCAL|:::::|aclocal|:::::|$missing_dir AUTOCONF|:::::|autoconf|:::::|$missing_dir AUTOMAKE|:::::|automake|:::::|$missing_dir More traces deleted  File: autoconf.info, Node: autoreconf Invocation, Prev: autoconf Invocation, Up: Making configure Scripts 3.5 Using `autoreconf' to Update `configure' Scripts ==================================================== Installing the various components of the GNU Build System can be tedious: running `autopoint' for Gettext, `automake' for `Makefile.in' etc. in each directory. It may be needed either because some tools such as `automake' have been updated on your system, or because some of the sources such as `configure.ac' have been updated, or finally, simply in order to install the GNU Build System in a fresh tree. `autoreconf' runs `autoconf', `autoheader', `aclocal', `automake', `libtoolize', and `autopoint' (when appropriate) repeatedly to update the GNU Build System in the specified directories and their subdirectories (*note Subdirectories::). By default, it only remakes those files that are older than their sources. The environment variables `AUTOM4TE', `AUTOCONF', `AUTOHEADER', `AUTOMAKE', `ACLOCAL', `AUTOPOINT', `LIBTOOLIZE', `M4', and `MAKE' may be used to override the invocation of the respective tools. If you install a new version of some tool, you can make `autoreconf' remake _all_ of the files by giving it the `--force' option. *Note Automatic Remaking::, for Make rules to automatically rebuild `configure' scripts when their source files change. That method handles the timestamps of configuration header templates properly, but does not pass `--autoconf-dir=DIR' or `--localdir=DIR'. Gettext supplies the `autopoint' command to add translation infrastructure to a source package. If you use `autopoint', your `configure.ac' should invoke both `AM_GNU_GETTEXT' and `AM_GNU_GETTEXT_VERSION(GETTEXT-VERSION)'. *Note Invoking the `autopoint' Program: (gettext)autopoint Invocation, for further details. `autoreconf' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' `-v' Print the name of each directory `autoreconf' examines and the commands it runs. If given two or more times, pass `--verbose' to subordinate tools that support it. `--debug' `-d' Don't remove the temporary files. `--force' `-f' Remake even `configure' scripts and configuration headers that are newer than their input files (`configure.ac' and, if present, `aclocal.m4'). `--install' `-i' Install the missing auxiliary files in the package. By default, files are copied; this can be changed with `--symlink'. If deemed appropriate, this option triggers calls to `automake --add-missing', `libtoolize', `autopoint', etc. `--no-recursive' Do not rebuild files in subdirectories to configure (see *note Subdirectories::, macro `AC_CONFIG_SUBDIRS'). `--symlink' `-s' When used with `--install', install symbolic links to the missing auxiliary files instead of copying them. `--make' `-m' When the directories were configured, update the configuration by running `./config.status --recheck && ./config.status', and then run `make'. `--include=DIR' `-I DIR' Append DIR to the include path. Multiple invocations accumulate. Passed on to `aclocal', `autoconf' and `autoheader' internally. `--prepend-include=DIR' `-B DIR' Prepend DIR to the include path. Multiple invocations accumulate. Passed on to `autoconf' and `autoheader' internally. `--warnings=CATEGORY' `-W CATEGORY' Report the warnings related to CATEGORY (which can actually be a comma separated list). `cross' related to cross compilation issues. `obsolete' report the uses of obsolete constructs. `portability' portability issues `syntax' dubious syntactic constructs. `all' report all the warnings `none' report none `error' treats warnings as errors `no-CATEGORY' disable warnings falling into CATEGORY Warnings about `syntax' are enabled by default, and the environment variable `WARNINGS', a comma separated list of categories, is honored as well. Passing `-W CATEGORY' actually behaves as if you had passed `--warnings syntax,$WARNINGS,CATEGORY'. To disable the defaults and `WARNINGS', and then enable warnings about obsolete constructs, use `-W none,obsolete'. If you want `autoreconf' to pass flags that are not listed here on to `aclocal', set `ACLOCAL_AMFLAGS' in your `Makefile.am'. Due to a limitation in the Autoconf implementation these flags currently must be set on a single line in `Makefile.am', without any backslash-newlines.  File: autoconf.info, Node: Setup, Next: Existing Tests, Prev: Making configure Scripts, Up: Top 4 Initialization and Output Files ********************************* Autoconf-generated `configure' scripts need some information about how to initialize, such as how to find the package's source files and about the output files to produce. The following sections describe the initialization and the creation of output files. * Menu: * Initializing configure:: Option processing etc. * Versioning:: Dealing with Autoconf versions * Notices:: Copyright, version numbers in `configure' * Input:: Where Autoconf should find files * Output:: Outputting results from the configuration * Configuration Actions:: Preparing the output based on results * Configuration Files:: Creating output files * Makefile Substitutions:: Using output variables in makefiles * Configuration Headers:: Creating a configuration header file * Configuration Commands:: Running arbitrary instantiation commands * Configuration Links:: Links depending on the configuration * Subdirectories:: Configuring independent packages together * Default Prefix:: Changing the default installation prefix  File: autoconf.info, Node: Initializing configure, Next: Versioning, Up: Setup 4.1 Initializing `configure' ============================ Every `configure' script must call `AC_INIT' before doing anything else that produces output. Calls to silent macros, such as `AC_DEFUN', may also occur prior to `AC_INIT', although these are generally used via `aclocal.m4', since that is implicitly included before the start of `configure.ac'. The only other required macro is `AC_OUTPUT' (*note Output::). -- Macro: AC_INIT (PACKAGE, VERSION, [BUG-REPORT], [TARNAME], [URL]) Process any command-line arguments and perform initialization and verification. Set the name of the PACKAGE and its VERSION. These are typically used in `--version' support, including that of `configure'. The optional argument BUG-REPORT should be the email to which users should send bug reports. The package TARNAME differs from PACKAGE: the latter designates the full package name (e.g., `GNU Autoconf'), while the former is meant for distribution tar ball names (e.g., `autoconf'). It defaults to PACKAGE with `GNU ' stripped, lower-cased, and all characters other than alphanumerics and underscores are changed to `-'. If provided, URL should be the home page for the package. The arguments of `AC_INIT' must be static, i.e., there should not be any shell computation, quotes, or newlines, but they can be computed by M4. This is because the package information strings are expanded at M4 time into several contexts, and must give the same text at shell time whether used in single-quoted strings, double-quoted strings, quoted here-documents, or unquoted here-documents. It is permissible to use `m4_esyscmd' or `m4_esyscmd_s' for computing a version string that changes with every commit to a version control system (in fact, Autoconf does just that, for all builds of the development tree made between releases). The following M4 macros (e.g., `AC_PACKAGE_NAME'), output variables (e.g., `PACKAGE_NAME'), and preprocessor symbols (e.g., `PACKAGE_NAME'), are defined by `AC_INIT': `AC_PACKAGE_NAME', `PACKAGE_NAME' Exactly PACKAGE. `AC_PACKAGE_TARNAME', `PACKAGE_TARNAME' Exactly TARNAME, possibly generated from PACKAGE. `AC_PACKAGE_VERSION', `PACKAGE_VERSION' Exactly VERSION. `AC_PACKAGE_STRING', `PACKAGE_STRING' Exactly `PACKAGE VERSION'. `AC_PACKAGE_BUGREPORT', `PACKAGE_BUGREPORT' Exactly BUG-REPORT, if one was provided. Typically an email address, or URL to a bug management web page. `AC_PACKAGE_URL', `PACKAGE_URL' Exactly URL, if one was provided. If URL was empty, but PACKAGE begins with `GNU ', then this defaults to `http://www.gnu.org/software/TARNAME/', otherwise, no URL is assumed. If your `configure' script does its own option processing, it should inspect `$@' or `$*' immediately after calling `AC_INIT', because other Autoconf macros liberally use the `set' command to process strings, and this has the side effect of updating `$@' and `$*'. However, we suggest that you use standard macros like `AC_ARG_ENABLE' instead of attempting to implement your own option processing. *Note Site Configuration::.  File: autoconf.info, Node: Versioning, Next: Notices, Prev: Initializing configure, Up: Setup 4.2 Dealing with Autoconf versions ================================== The following optional macros can be used to help choose the minimum version of Autoconf that can successfully compile a given `configure.ac'. -- Macro: AC_PREREQ (VERSION) Ensure that a recent enough version of Autoconf is being used. If the version of Autoconf being used to create `configure' is earlier than VERSION, print an error message to the standard error output and exit with failure (exit status is 63). For example: AC_PREREQ([2.69]) This macro may be used before `AC_INIT'. -- Macro: AC_AUTOCONF_VERSION This macro was introduced in Autoconf 2.62. It identifies the version of Autoconf that is currently parsing the input file, in a format suitable for `m4_version_compare' (*note m4_version_compare::); in other words, for this release of Autoconf, its value is `2.69'. One potential use of this macro is for writing conditional fallbacks based on when a feature was added to Autoconf, rather than using `AC_PREREQ' to require the newer version of Autoconf. However, remember that the Autoconf philosophy favors feature checks over version checks. You should not expand this macro directly; use `m4_defn([AC_AUTOCONF_VERSION])' instead. This is because some users might have a beta version of Autoconf installed, with arbitrary letters included in its version string. This means it is possible for the version string to contain the name of a defined macro, such that expanding `AC_AUTOCONF_VERSION' would trigger the expansion of that macro during rescanning, and change the version string to be different than what you intended to check.  File: autoconf.info, Node: Notices, Next: Input, Prev: Versioning, Up: Setup 4.3 Notices in `configure' ========================== The following macros manage version numbers for `configure' scripts. Using them is optional. -- Macro: AC_COPYRIGHT (COPYRIGHT-NOTICE) State that, in addition to the Free Software Foundation's copyright on the Autoconf macros, parts of your `configure' are covered by the COPYRIGHT-NOTICE. The COPYRIGHT-NOTICE shows up in both the head of `configure' and in `configure --version'. -- Macro: AC_REVISION (REVISION-INFO) Copy revision stamp REVISION-INFO into the `configure' script, with any dollar signs or double-quotes removed. This macro lets you put a revision stamp from `configure.ac' into `configure' without RCS or CVS changing it when you check in `configure'. That way, you can determine easily which revision of `configure.ac' a particular `configure' corresponds to. For example, this line in `configure.ac': AC_REVISION([$Revision: 1.30 $]) produces this in `configure': #!/bin/sh # From configure.ac Revision: 1.30  File: autoconf.info, Node: Input, Next: Output, Prev: Notices, Up: Setup 4.4 Finding `configure' Input ============================= -- Macro: AC_CONFIG_SRCDIR (UNIQUE-FILE-IN-SOURCE-DIR) UNIQUE-FILE-IN-SOURCE-DIR is some file that is in the package's source directory; `configure' checks for this file's existence to make sure that the directory that it is told contains the source code in fact does. Occasionally people accidentally specify the wrong directory with `--srcdir'; this is a safety check. *Note configure Invocation::, for more information. Packages that do manual configuration or use the `install' program might need to tell `configure' where to find some other shell scripts by calling `AC_CONFIG_AUX_DIR', though the default places it looks are correct for most cases. -- Macro: AC_CONFIG_AUX_DIR (DIR) Use the auxiliary build tools (e.g., `install-sh', `config.sub', `config.guess', Cygnus `configure', Automake and Libtool scripts, etc.) that are in directory DIR. These are auxiliary files used in configuration. DIR can be either absolute or relative to `SRCDIR'. The default is `SRCDIR' or `SRCDIR/..' or `SRCDIR/../..', whichever is the first that contains `install-sh'. The other files are not checked for, so that using `AC_PROG_INSTALL' does not automatically require distributing the other auxiliary files. It checks for `install.sh' also, but that name is obsolete because some `make' have a rule that creates `install' from it if there is no makefile. The auxiliary directory is commonly named `build-aux'. If you need portability to DOS variants, do not name the auxiliary directory `aux'. *Note File System Conventions::. -- Macro: AC_REQUIRE_AUX_FILE (FILE) Declares that FILE is expected in the directory defined above. In Autoconf proper, this macro does nothing: its sole purpose is to be traced by third-party tools to produce a list of expected auxiliary files. For instance it is called by macros like `AC_PROG_INSTALL' (*note Particular Programs::) or `AC_CANONICAL_BUILD' (*note Canonicalizing::) to register the auxiliary files they need. Similarly, packages that use `aclocal' should declare where local macros can be found using `AC_CONFIG_MACRO_DIR'. -- Macro: AC_CONFIG_MACRO_DIR (DIR) Specify DIR as the location of additional local Autoconf macros. This macro is intended for use by future versions of commands like `autoreconf' that trace macro calls. It should be called directly from `configure.ac' so that tools that install macros for `aclocal' can find the macros' declarations. Note that if you use `aclocal' from Automake to generate `aclocal.m4', you must also set `ACLOCAL_AMFLAGS = -I DIR' in your top-level `Makefile.am'. Due to a limitation in the Autoconf implementation of `autoreconf', these include directives currently must be set on a single line in `Makefile.am', without any backslash-newlines.  File: autoconf.info, Node: Output, Next: Configuration Actions, Prev: Input, Up: Setup 4.5 Outputting Files ==================== Every Autoconf script, e.g., `configure.ac', should finish by calling `AC_OUTPUT'. That is the macro that generates and runs `config.status', which in turn creates the makefiles and any other files resulting from configuration. This is the only required macro besides `AC_INIT' (*note Input::). -- Macro: AC_OUTPUT Generate `config.status' and launch it. Call this macro once, at the end of `configure.ac'. `config.status' performs all the configuration actions: all the output files (see *note Configuration Files::, macro `AC_CONFIG_FILES'), header files (see *note Configuration Headers::, macro `AC_CONFIG_HEADERS'), commands (see *note Configuration Commands::, macro `AC_CONFIG_COMMANDS'), links (see *note Configuration Links::, macro `AC_CONFIG_LINKS'), subdirectories to configure (see *note Subdirectories::, macro `AC_CONFIG_SUBDIRS') are honored. The location of your `AC_OUTPUT' invocation is the exact point where configuration actions are taken: any code afterwards is executed by `configure' once `config.status' was run. If you want to bind actions to `config.status' itself (independently of whether `configure' is being run), see *note Running Arbitrary Configuration Commands: Configuration Commands. Historically, the usage of `AC_OUTPUT' was somewhat different. *Note Obsolete Macros::, for a description of the arguments that `AC_OUTPUT' used to support. If you run `make' in subdirectories, you should run it using the `make' variable `MAKE'. Most versions of `make' set `MAKE' to the name of the `make' program plus any options it was given. (But many do not include in it the values of any variables set on the command line, so those are not passed on automatically.) Some old versions of `make' do not set this variable. The following macro allows you to use it even with those versions. -- Macro: AC_PROG_MAKE_SET If the Make command, `$MAKE' if set or else `make', predefines `$(MAKE)', define output variable `SET_MAKE' to be empty. Otherwise, define `SET_MAKE' to a macro definition that sets `$(MAKE)', such as `MAKE=make'. Calls `AC_SUBST' for `SET_MAKE'. If you use this macro, place a line like this in each `Makefile.in' that runs `MAKE' on other directories: @SET_MAKE@  File: autoconf.info, Node: Configuration Actions, Next: Configuration Files, Prev: Output, Up: Setup 4.6 Performing Configuration Actions ==================================== `configure' is designed so that it appears to do everything itself, but there is actually a hidden slave: `config.status'. `configure' is in charge of examining your system, but it is `config.status' that actually takes the proper actions based on the results of `configure'. The most typical task of `config.status' is to _instantiate_ files. This section describes the common behavior of the four standard instantiating macros: `AC_CONFIG_FILES', `AC_CONFIG_HEADERS', `AC_CONFIG_COMMANDS' and `AC_CONFIG_LINKS'. They all have this prototype: AC_CONFIG_ITEMS(TAG..., [COMMANDS], [INIT-CMDS]) where the arguments are: TAG... A blank-or-newline-separated list of tags, which are typically the names of the files to instantiate. You are encouraged to use literals as TAGS. In particular, you should avoid ... && my_foos="$my_foos fooo" ... && my_foos="$my_foos foooo" AC_CONFIG_ITEMS([$my_foos]) and use this instead: ... && AC_CONFIG_ITEMS([fooo]) ... && AC_CONFIG_ITEMS([foooo]) The macros `AC_CONFIG_FILES' and `AC_CONFIG_HEADERS' use special TAG values: they may have the form `OUTPUT' or `OUTPUT:INPUTS'. The file OUTPUT is instantiated from its templates, INPUTS (defaulting to `OUTPUT.in'). `AC_CONFIG_FILES([Makefile:boiler/top.mk:boiler/bot.mk])', for example, asks for the creation of the file `Makefile' that contains the expansion of the output variables in the concatenation of `boiler/top.mk' and `boiler/bot.mk'. The special value `-' might be used to denote the standard output when used in OUTPUT, or the standard input when used in the INPUTS. You most probably don't need to use this in `configure.ac', but it is convenient when using the command line interface of `./config.status', see *note config.status Invocation::, for more details. The INPUTS may be absolute or relative file names. In the latter case they are first looked for in the build tree, and then in the source tree. Input files should be text files, and a line length below 2000 bytes should be safe. COMMANDS Shell commands output literally into `config.status', and associated with a tag that the user can use to tell `config.status' which commands to run. The commands are run each time a TAG request is given to `config.status', typically each time the file `TAG' is created. The variables set during the execution of `configure' are _not_ available here: you first need to set them via the INIT-CMDS. Nonetheless the following variables are precomputed: `srcdir' The name of the top source directory, assuming that the working directory is the top build directory. This is what the `configure' option `--srcdir' sets. `ac_top_srcdir' The name of the top source directory, assuming that the working directory is the current build directory. `ac_top_build_prefix' The name of the top build directory, assuming that the working directory is the current build directory. It can be empty, or else ends with a slash, so that you may concatenate it. `ac_srcdir' The name of the corresponding source directory, assuming that the working directory is the current build directory. `tmp' The name of a temporary directory within the build tree, which you can use if you need to create additional temporary files. The directory is cleaned up when `config.status' is done or interrupted. Please use package-specific file name prefixes to avoid clashing with files that `config.status' may use internally. The "current" directory refers to the directory (or pseudo-directory) containing the input part of TAGS. For instance, running AC_CONFIG_COMMANDS([deep/dir/out:in/in.in], [...], [...]) with `--srcdir=../package' produces the following values: # Argument of --srcdir srcdir='../package' # Reversing deep/dir ac_top_build_prefix='../../' # Concatenation of $ac_top_build_prefix and srcdir ac_top_srcdir='../../../package' # Concatenation of $ac_top_srcdir and deep/dir ac_srcdir='../../../package/deep/dir' independently of `in/in.in'. INIT-CMDS Shell commands output _unquoted_ near the beginning of `config.status', and executed each time `config.status' runs (regardless of the tag). Because they are unquoted, for example, `$var' is output as the value of `var'. INIT-CMDS is typically used by `configure' to give `config.status' some variables it needs to run the COMMANDS. You should be extremely cautious in your variable names: all the INIT-CMDS share the same name space and may overwrite each other in unpredictable ways. Sorry... All these macros can be called multiple times, with different TAG values, of course!  File: autoconf.info, Node: Configuration Files, Next: Makefile Substitutions, Prev: Configuration Actions, Up: Setup 4.7 Creating Configuration Files ================================ Be sure to read the previous section, *note Configuration Actions::. -- Macro: AC_CONFIG_FILES (FILE..., [CMDS], [INIT-CMDS]) Make `AC_OUTPUT' create each `FILE' by copying an input file (by default `FILE.in'), substituting the output variable values. This macro is one of the instantiating macros; see *note Configuration Actions::. *Note Makefile Substitutions::, for more information on using output variables. *Note Setting Output Variables::, for more information on creating them. This macro creates the directory that the file is in if it doesn't exist. Usually, makefiles are created this way, but other files, such as `.gdbinit', can be specified as well. Typical calls to `AC_CONFIG_FILES' look like this: AC_CONFIG_FILES([Makefile src/Makefile man/Makefile X/Imakefile]) AC_CONFIG_FILES([autoconf], [chmod +x autoconf]) You can override an input file name by appending to FILE a colon-separated list of input files. Examples: AC_CONFIG_FILES([Makefile:boiler/top.mk:boiler/bot.mk] [lib/Makefile:boiler/lib.mk]) Doing this allows you to keep your file names acceptable to DOS variants, or to prepend and/or append boilerplate to the file.  File: autoconf.info, Node: Makefile Substitutions, Next: Configuration Headers, Prev: Configuration Files, Up: Setup 4.8 Substitutions in Makefiles ============================== Each subdirectory in a distribution that contains something to be compiled or installed should come with a file `Makefile.in', from which `configure' creates a file `Makefile' in that directory. To create `Makefile', `configure' performs a simple variable substitution, replacing occurrences of `@VARIABLE@' in `Makefile.in' with the value that `configure' has determined for that variable. Variables that are substituted into output files in this way are called "output variables". They are ordinary shell variables that are set in `configure'. To make `configure' substitute a particular variable into the output files, the macro `AC_SUBST' must be called with that variable name as an argument. Any occurrences of `@VARIABLE@' for other variables are left unchanged. *Note Setting Output Variables::, for more information on creating output variables with `AC_SUBST'. A software package that uses a `configure' script should be distributed with a file `Makefile.in', but no makefile; that way, the user has to properly configure the package for the local system before compiling it. *Note Makefile Conventions: (standards)Makefile Conventions, for more information on what to put in makefiles. * Menu: * Preset Output Variables:: Output variables that are always set * Installation Directory Variables:: Other preset output variables * Changed Directory Variables:: Warnings about `datarootdir' * Build Directories:: Supporting multiple concurrent compiles * Automatic Remaking:: Makefile rules for configuring  File: autoconf.info, Node: Preset Output Variables, Next: Installation Directory Variables, Up: Makefile Substitutions 4.8.1 Preset Output Variables ----------------------------- Some output variables are preset by the Autoconf macros. Some of the Autoconf macros set additional output variables, which are mentioned in the descriptions for those macros. *Note Output Variable Index::, for a complete list of output variables. *Note Installation Directory Variables::, for the list of the preset ones related to installation directories. Below are listed the other preset ones, many of which are precious variables (*note Setting Output Variables::, `AC_ARG_VAR'). The preset variables which are available during `config.status' (*note Configuration Actions::) may also be used during `configure' tests. For example, it is permissible to reference `$srcdir' when constructing a list of directories to pass via option `-I' during a compiler feature check. When used in this manner, coupled with the fact that `configure' is always run from the top build directory, it is sufficient to use just `$srcdir' instead of `$top_srcdir'. -- Variable: CFLAGS Debugging and optimization options for the C compiler. If it is not set in the environment when `configure' runs, the default value is set when you call `AC_PROG_CC' (or empty if you don't). `configure' uses this variable when compiling or linking programs to test for C features. If a compiler option affects only the behavior of the preprocessor (e.g., `-DNAME'), it should be put into `CPPFLAGS' instead. If it affects only the linker (e.g., `-LDIRECTORY'), it should be put into `LDFLAGS' instead. If it affects only the compiler proper, `CFLAGS' is the natural home for it. If an option affects multiple phases of the compiler, though, matters get tricky. One approach to put such options directly into `CC', e.g., `CC='gcc -m64''. Another is to put them into both `CPPFLAGS' and `LDFLAGS', but not into `CFLAGS'. However, remember that some `Makefile' variables are reserved by the GNU Coding Standards for the use of the "user"--the person building the package. For instance, `CFLAGS' is one such variable. Sometimes package developers are tempted to set user variables such as `CFLAGS' because it appears to make their job easier. However, the package itself should never set a user variable, particularly not to include switches that are required for proper compilation of the package. Since these variables are documented as being for the package builder, that person rightfully expects to be able to override any of these variables at build time. If the package developer needs to add switches without interfering with the user, the proper way to do that is to introduce an additional variable. Automake makes this easy by introducing `AM_CFLAGS' (*note Flag Variables Ordering: (automake)Flag Variables Ordering.), but the concept is the same even if Automake is not used. -- Variable: configure_input A comment saying that the file was generated automatically by `configure' and giving the name of the input file. `AC_OUTPUT' adds a comment line containing this variable to the top of every makefile it creates. For other files, you should reference this variable in a comment at the top of each input file. For example, an input shell script should begin like this: #!/bin/sh # @configure_input@ The presence of that line also reminds people editing the file that it needs to be processed by `configure' in order to be used. -- Variable: CPPFLAGS Preprocessor options for the C, C++, Objective C, and Objective C++ preprocessors and compilers. If it is not set in the environment when `configure' runs, the default value is empty. `configure' uses this variable when preprocessing or compiling programs to test for C, C++, Objective C, and Objective C++ features. This variable's contents should contain options like `-I', `-D', and `-U' that affect only the behavior of the preprocessor. Please see the explanation of `CFLAGS' for what you can do if an option affects other phases of the compiler as well. Currently, `configure' always links as part of a single invocation of the compiler that also preprocesses and compiles, so it uses this variable also when linking programs. However, it is unwise to depend on this behavior because the GNU Coding Standards do not require it and many packages do not use `CPPFLAGS' when linking programs. *Note Special Chars in Variables::, for limitations that `CPPFLAGS' might run into. -- Variable: CXXFLAGS Debugging and optimization options for the C++ compiler. It acts like `CFLAGS', but for C++ instead of C. -- Variable: DEFS `-D' options to pass to the C compiler. If `AC_CONFIG_HEADERS' is called, `configure' replaces `@DEFS@' with `-DHAVE_CONFIG_H' instead (*note Configuration Headers::). This variable is not defined while `configure' is performing its tests, only when creating the output files. *Note Setting Output Variables::, for how to check the results of previous tests. -- Variable: ECHO_C -- Variable: ECHO_N -- Variable: ECHO_T How does one suppress the trailing newline from `echo' for question-answer message pairs? These variables provide a way: echo $ECHO_N "And the winner is... $ECHO_C" sleep 100000000000 echo "${ECHO_T}dead." Some old and uncommon `echo' implementations offer no means to achieve this, in which case `ECHO_T' is set to tab. You might not want to use it. -- Variable: ERLCFLAGS Debugging and optimization options for the Erlang compiler. If it is not set in the environment when `configure' runs, the default value is empty. `configure' uses this variable when compiling programs to test for Erlang features. -- Variable: FCFLAGS Debugging and optimization options for the Fortran compiler. If it is not set in the environment when `configure' runs, the default value is set when you call `AC_PROG_FC' (or empty if you don't). `configure' uses this variable when compiling or linking programs to test for Fortran features. -- Variable: FFLAGS Debugging and optimization options for the Fortran 77 compiler. If it is not set in the environment when `configure' runs, the default value is set when you call `AC_PROG_F77' (or empty if you don't). `configure' uses this variable when compiling or linking programs to test for Fortran 77 features. -- Variable: LDFLAGS Options for the linker. If it is not set in the environment when `configure' runs, the default value is empty. `configure' uses this variable when linking programs to test for C, C++, Objective C, Objective C++, Fortran, and Go features. This variable's contents should contain options like `-s' and `-L' that affect only the behavior of the linker. Please see the explanation of `CFLAGS' for what you can do if an option also affects other phases of the compiler. Don't use this variable to pass library names (`-l') to the linker; use `LIBS' instead. -- Variable: LIBS `-l' options to pass to the linker. The default value is empty, but some Autoconf macros may prepend extra libraries to this variable if those libraries are found and provide necessary functions, see *note Libraries::. `configure' uses this variable when linking programs to test for C, C++, Objective C, Objective C++, Fortran, and Go features. -- Variable: OBJCFLAGS Debugging and optimization options for the Objective C compiler. It acts like `CFLAGS', but for Objective C instead of C. -- Variable: OBJCXXFLAGS Debugging and optimization options for the Objective C++ compiler. It acts like `CXXFLAGS', but for Objective C++ instead of C++. -- Variable: GOFLAGS Debugging and optimization options for the Go compiler. It acts like `CFLAGS', but for Go instead of C. -- Variable: builddir Rigorously equal to `.'. Added for symmetry only. -- Variable: abs_builddir Absolute name of `builddir'. -- Variable: top_builddir The relative name of the top level of the current build tree. In the top-level directory, this is the same as `builddir'. -- Variable: top_build_prefix The relative name of the top level of the current build tree with final slash if nonempty. This is the same as `top_builddir', except that it contains zero or more runs of `../', so it should not be appended with a slash for concatenation. This helps for `make' implementations that otherwise do not treat `./file' and `file' as equal in the toplevel build directory. -- Variable: abs_top_builddir Absolute name of `top_builddir'. -- Variable: srcdir The name of the directory that contains the source code for that makefile. -- Variable: abs_srcdir Absolute name of `srcdir'. -- Variable: top_srcdir The name of the top-level source code directory for the package. In the top-level directory, this is the same as `srcdir'. -- Variable: abs_top_srcdir Absolute name of `top_srcdir'.  File: autoconf.info, Node: Installation Directory Variables, Next: Changed Directory Variables, Prev: Preset Output Variables, Up: Makefile Substitutions 4.8.2 Installation Directory Variables -------------------------------------- The following variables specify the directories for package installation, see *note Variables for Installation Directories: (standards)Directory Variables, for more information. Each variable corresponds to an argument of `configure'; trailing slashes are stripped so that expressions such as `${prefix}/lib' expand with only one slash between directory names. See the end of this section for details on when and how to use these variables. -- Variable: bindir The directory for installing executables that users run. -- Variable: datadir The directory for installing idiosyncratic read-only architecture-independent data. -- Variable: datarootdir The root of the directory tree for read-only architecture-independent data files. -- Variable: docdir The directory for installing documentation files (other than Info and man). -- Variable: dvidir The directory for installing documentation files in DVI format. -- Variable: exec_prefix The installation prefix for architecture-dependent files. By default it's the same as `prefix'. You should avoid installing anything directly to `exec_prefix'. However, the default value for directories containing architecture-dependent files should be relative to `exec_prefix'. -- Variable: htmldir The directory for installing HTML documentation. -- Variable: includedir The directory for installing C header files. -- Variable: infodir The directory for installing documentation in Info format. -- Variable: libdir The directory for installing object code libraries. -- Variable: libexecdir The directory for installing executables that other programs run. -- Variable: localedir The directory for installing locale-dependent but architecture-independent data, such as message catalogs. This directory usually has a subdirectory per locale. -- Variable: localstatedir The directory for installing modifiable single-machine data. -- Variable: mandir The top-level directory for installing documentation in man format. -- Variable: oldincludedir The directory for installing C header files for non-GCC compilers. -- Variable: pdfdir The directory for installing PDF documentation. -- Variable: prefix The common installation prefix for all files. If `exec_prefix' is defined to a different value, `prefix' is used only for architecture-independent files. -- Variable: psdir The directory for installing PostScript documentation. -- Variable: sbindir The directory for installing executables that system administrators run. -- Variable: sharedstatedir The directory for installing modifiable architecture-independent data. -- Variable: sysconfdir The directory for installing read-only single-machine data. Most of these variables have values that rely on `prefix' or `exec_prefix'. It is deliberate that the directory output variables keep them unexpanded: typically `@datarootdir@' is replaced by `${prefix}/share', not `/usr/local/share', and `@datadir@' is replaced by `${datarootdir}'. This behavior is mandated by the GNU Coding Standards, so that when the user runs: `make' she can still specify a different prefix from the one specified to `configure', in which case, if needed, the package should hard code dependencies corresponding to the make-specified prefix. `make install' she can specify a different installation location, in which case the package _must_ still depend on the location which was compiled in (i.e., never recompile when `make install' is run). This is an extremely important feature, as many people may decide to install all the files of a package grouped together, and then install links from the final locations to there. In order to support these features, it is essential that `datarootdir' remains defined as `${prefix}/share', so that its value can be expanded based on the current value of `prefix'. A corollary is that you should not use these variables except in makefiles. For instance, instead of trying to evaluate `datadir' in `configure' and hard-coding it in makefiles using e.g., `AC_DEFINE_UNQUOTED([DATADIR], ["$datadir"], [Data directory.])', you should add `-DDATADIR='$(datadir)'' to your makefile's definition of `CPPFLAGS' (`AM_CPPFLAGS' if you are also using Automake). Similarly, you should not rely on `AC_CONFIG_FILES' to replace `bindir' and friends in your shell scripts and other files; instead, let `make' manage their replacement. For instance Autoconf ships templates of its shell scripts ending with `.in', and uses a makefile snippet similar to the following to build scripts like `autoheader' and `autom4te': edit = sed \ -e 's|@bindir[@]|$(bindir)|g' \ -e 's|@pkgdatadir[@]|$(pkgdatadir)|g' \ -e 's|@prefix[@]|$(prefix)|g' autoheader autom4te: Makefile rm -f $@ $@.tmp srcdir=''; \ test -f ./$@.in || srcdir=$(srcdir)/; \ $(edit) $${srcdir}$@.in >$@.tmp chmod +x $@.tmp chmod a-w $@.tmp mv $@.tmp $@ autoheader: $(srcdir)/autoheader.in autom4te: $(srcdir)/autom4te.in Some details are noteworthy: `@bindir[@]' The brackets prevent `configure' from replacing `@bindir@' in the Sed expression itself. Brackets are preferable to a backslash here, since Posix says `\@' is not portable. `$(bindir)' Don't use `@bindir@'! Use the matching makefile variable instead. `$(pkgdatadir)' The example takes advantage of the variable `$(pkgdatadir)' provided by Automake; it is equivalent to `$(datadir)/$(PACKAGE)'. `/' Don't use `/' in the Sed expressions that replace file names since most likely the variables you use, such as `$(bindir)', contain `/'. Use a shell metacharacter instead, such as `|'. special characters File names, file name components, and the value of `VPATH' should not contain shell metacharacters or white space. *Note Special Chars in Variables::. dependency on `Makefile' Since `edit' uses values that depend on the configuration specific values (`prefix', etc.) and not only on `VERSION' and so forth, the output depends on `Makefile', not `configure.ac'. `$@' The main rule is generic, and uses `$@' extensively to avoid the need for multiple copies of the rule. Separated dependencies and single suffix rules You can't use them! The above snippet cannot be (portably) rewritten as: autoconf autoheader: Makefile .in: rm -f $@ $@.tmp $(edit) $< >$@.tmp chmod +x $@.tmp mv $@.tmp $@ *Note Single Suffix Rules::, for details. `$(srcdir)' Be sure to specify the name of the source directory, otherwise the package won't support separated builds. For the more specific installation of Erlang libraries, the following variables are defined: -- Variable: ERLANG_INSTALL_LIB_DIR The common parent directory of Erlang library installation directories. This variable is set by calling the `AC_ERLANG_SUBST_INSTALL_LIB_DIR' macro in `configure.ac'. -- Variable: ERLANG_INSTALL_LIB_DIR_LIBRARY The installation directory for Erlang library LIBRARY. This variable is set by using the `AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR' macro in `configure.ac'. *Note Erlang Libraries::, for details.  File: autoconf.info, Node: Changed Directory Variables, Next: Build Directories, Prev: Installation Directory Variables, Up: Makefile Substitutions 4.8.3 Changed Directory Variables --------------------------------- In Autoconf 2.60, the set of directory variables has changed, and the defaults of some variables have been adjusted (*note Installation Directory Variables::) to changes in the GNU Coding Standards. Notably, `datadir', `infodir', and `mandir' are now expressed in terms of `datarootdir'. If you are upgrading from an earlier Autoconf version, you may need to adjust your files to ensure that the directory variables are substituted correctly (*note Defining Directories::), and that a definition of `datarootdir' is in place. For example, in a `Makefile.in', adding datarootdir = @datarootdir@ is usually sufficient. If you use Automake to create `Makefile.in', it will add this for you. To help with the transition, Autoconf warns about files that seem to use `datarootdir' without defining it. In some cases, it then expands the value of `$datarootdir' in substitutions of the directory variables. The following example shows such a warning: $ cat configure.ac AC_INIT AC_CONFIG_FILES([Makefile]) AC_OUTPUT $ cat Makefile.in prefix = @prefix@ datadir = @datadir@ $ autoconf $ configure configure: creating ./config.status config.status: creating Makefile config.status: WARNING: Makefile.in seems to ignore the --datarootdir setting $ cat Makefile prefix = /usr/local datadir = ${prefix}/share Usually one can easily change the file to accommodate both older and newer Autoconf releases: $ cat Makefile.in prefix = @prefix@ datarootdir = @datarootdir@ datadir = @datadir@ $ configure configure: creating ./config.status config.status: creating Makefile $ cat Makefile prefix = /usr/local datarootdir = ${prefix}/share datadir = ${datarootdir} In some cases, however, the checks may not be able to detect that a suitable initialization of `datarootdir' is in place, or they may fail to detect that such an initialization is necessary in the output file. If, after auditing your package, there are still spurious `configure' warnings about `datarootdir', you may add the line AC_DEFUN([AC_DATAROOTDIR_CHECKED]) to your `configure.ac' to disable the warnings. This is an exception to the usual rule that you should not define a macro whose name begins with `AC_' (*note Macro Names::).  File: autoconf.info, Node: Build Directories, Next: Automatic Remaking, Prev: Changed Directory Variables, Up: Makefile Substitutions 4.8.4 Build Directories ----------------------- You can support compiling a software package for several architectures simultaneously from the same copy of the source code. The object files for each architecture are kept in their own directory. To support doing this, `make' uses the `VPATH' variable to find the files that are in the source directory. GNU Make can do this. Most other recent `make' programs can do this as well, though they may have difficulties and it is often simpler to recommend GNU `make' (*note VPATH and Make::). Older `make' programs do not support `VPATH'; when using them, the source code must be in the same directory as the object files. If you are using GNU Automake, the remaining details in this section are already covered for you, based on the contents of your `Makefile.am'. But if you are using Autoconf in isolation, then supporting `VPATH' requires the following in your `Makefile.in': srcdir = @srcdir@ VPATH = @srcdir@ Do not set `VPATH' to the value of another variable (*note Variables listed in VPATH::. `configure' substitutes the correct value for `srcdir' when it produces `Makefile'. Do not use the `make' variable `$<', which expands to the file name of the file in the source directory (found with `VPATH'), except in implicit rules. (An implicit rule is one such as `.c.o', which tells how to create a `.o' file from a `.c' file.) Some versions of `make' do not set `$<' in explicit rules; they expand it to an empty value. Instead, Make command lines should always refer to source files by prefixing them with `$(srcdir)/'. For example: time.info: time.texinfo $(MAKEINFO) '$(srcdir)/time.texinfo'  File: autoconf.info, Node: Automatic Remaking, Prev: Build Directories, Up: Makefile Substitutions 4.8.5 Automatic Remaking ------------------------ You can put rules like the following in the top-level `Makefile.in' for a package to automatically update the configuration information when you change the configuration files. This example includes all of the optional files, such as `aclocal.m4' and those related to configuration header files. Omit from the `Makefile.in' rules for any of these files that your package does not use. The `$(srcdir)/' prefix is included because of limitations in the `VPATH' mechanism. The `stamp-' files are necessary because the timestamps of `config.h.in' and `config.h' are not changed if remaking them does not change their contents. This feature avoids unnecessary recompilation. You should include the file `stamp-h.in' in your package's distribution, so that `make' considers `config.h.in' up to date. Don't use `touch' (*note Limitations of Usual Tools: touch.); instead, use `echo' (using `date' would cause needless differences, hence CVS conflicts, etc.). $(srcdir)/configure: configure.ac aclocal.m4 cd '$(srcdir)' && autoconf # autoheader might not change config.h.in, so touch a stamp file. $(srcdir)/config.h.in: stamp-h.in $(srcdir)/stamp-h.in: configure.ac aclocal.m4 cd '$(srcdir)' && autoheader echo timestamp > '$(srcdir)/stamp-h.in' config.h: stamp-h stamp-h: config.h.in config.status ./config.status Makefile: Makefile.in config.status ./config.status config.status: configure ./config.status --recheck (Be careful if you copy these lines directly into your makefile, as you need to convert the indented lines to start with the tab character.) In addition, you should use AC_CONFIG_FILES([stamp-h], [echo timestamp > stamp-h]) so `config.status' ensures that `config.h' is considered up to date. *Note Output::, for more information about `AC_OUTPUT'. *Note config.status Invocation::, for more examples of handling configuration-related dependencies.  File: autoconf.info, Node: Configuration Headers, Next: Configuration Commands, Prev: Makefile Substitutions, Up: Setup 4.9 Configuration Header Files ============================== When a package contains more than a few tests that define C preprocessor symbols, the command lines to pass `-D' options to the compiler can get quite long. This causes two problems. One is that the `make' output is hard to visually scan for errors. More seriously, the command lines can exceed the length limits of some operating systems. As an alternative to passing `-D' options to the compiler, `configure' scripts can create a C header file containing `#define' directives. The `AC_CONFIG_HEADERS' macro selects this kind of output. Though it can be called anywhere between `AC_INIT' and `AC_OUTPUT', it is customary to call it right after `AC_INIT'. The package should `#include' the configuration header file before any other header files, to prevent inconsistencies in declarations (for example, if it redefines `const'). To provide for VPATH builds, remember to pass the C compiler a `-I.' option (or `-I..'; whichever directory contains `config.h'). Even if you use `#include "config.h"', the preprocessor searches only the directory of the currently read file, i.e., the source directory, not the build directory. With the appropriate `-I' option, you can use `#include '. Actually, it's a good habit to use it, because in the rare case when the source directory contains another `config.h', the build directory should be searched first. -- Macro: AC_CONFIG_HEADERS (HEADER ..., [CMDS], [INIT-CMDS]) This macro is one of the instantiating macros; see *note Configuration Actions::. Make `AC_OUTPUT' create the file(s) in the blank-or-newline-separated list HEADER containing C preprocessor `#define' statements, and replace `@DEFS@' in generated files with `-DHAVE_CONFIG_H' instead of the value of `DEFS'. The usual name for HEADER is `config.h'. If HEADER already exists and its contents are identical to what `AC_OUTPUT' would put in it, it is left alone. Doing this allows making some changes in the configuration without needlessly causing object files that depend on the header file to be recompiled. Usually the input file is named `HEADER.in'; however, you can override the input file name by appending to HEADER a colon-separated list of input files. For example, you might need to make the input file name acceptable to DOS variants: AC_CONFIG_HEADERS([config.h:config.hin]) -- Macro: AH_HEADER This macro is defined as the name of the first declared config header and undefined if no config headers have been declared up to this point. A third-party macro may, for example, require use of a config header without invoking AC_CONFIG_HEADERS twice, like this: AC_CONFIG_COMMANDS_PRE( [m4_ifndef([AH_HEADER], [AC_CONFIG_HEADERS([config.h])])]) *Note Configuration Actions::, for more details on HEADER. * Menu: * Header Templates:: Input for the configuration headers * autoheader Invocation:: How to create configuration templates * Autoheader Macros:: How to specify CPP templates  File: autoconf.info, Node: Header Templates, Next: autoheader Invocation, Up: Configuration Headers 4.9.1 Configuration Header Templates ------------------------------------ Your distribution should contain a template file that looks as you want the final header file to look, including comments, with `#undef' statements which are used as hooks. For example, suppose your `configure.ac' makes these calls: AC_CONFIG_HEADERS([conf.h]) AC_CHECK_HEADERS([unistd.h]) Then you could have code like the following in `conf.h.in'. The `conf.h' created by `configure' defines `HAVE_UNISTD_H' to 1, if and only if the system has `unistd.h'. /* Define as 1 if you have unistd.h. */ #undef HAVE_UNISTD_H The format of the template file is stricter than what the C preprocessor is required to accept. A directive line should contain only whitespace, `#undef', and `HAVE_UNISTD_H'. The use of `#define' instead of `#undef', or of comments on the same line as `#undef', is strongly discouraged. Each hook should only be listed once. Other preprocessor lines, such as `#ifdef' or `#include', are copied verbatim from the template into the generated header. Since it is a tedious task to keep a template header up to date, you may use `autoheader' to generate it, see *note autoheader Invocation::. During the instantiation of the header, each `#undef' line in the template file for each symbol defined by `AC_DEFINE' is changed to an appropriate `#define'. If the corresponding `AC_DEFINE' has not been executed during the `configure' run, the `#undef' line is commented out. (This is important, e.g., for `_POSIX_SOURCE': on many systems, it can be implicitly defined by the compiler, and undefining it in the header would then break compilation of subsequent headers.) Currently, _all_ remaining `#undef' lines in the header template are commented out, whether or not there was a corresponding `AC_DEFINE' for the macro name; but this behavior is not guaranteed for future releases of Autoconf. Generally speaking, since you should not use `#define', and you cannot guarantee whether a `#undef' directive in the header template will be converted to a `#define' or commented out in the generated header file, the template file cannot be used for conditional definition effects. Consequently, if you need to use the construct #ifdef THIS # define THAT #endif you must place it outside of the template. If you absolutely need to hook it to the config header itself, please put the directives to a separate file, and `#include' that file from the config header template. If you are using `autoheader', you would probably use `AH_BOTTOM' to append the `#include' directive.  File: autoconf.info, Node: autoheader Invocation, Next: Autoheader Macros, Prev: Header Templates, Up: Configuration Headers 4.9.2 Using `autoheader' to Create `config.h.in' ------------------------------------------------ The `autoheader' program can create a template file of C `#define' statements for `configure' to use. It searches for the first invocation of `AC_CONFIG_HEADERS' in `configure' sources to determine the name of the template. (If the first call of `AC_CONFIG_HEADERS' specifies more than one input file name, `autoheader' uses the first one.) It is recommended that only one input file is used. If you want to append a boilerplate code, it is preferable to use `AH_BOTTOM([#include ])'. File `conf_post.h' is not processed during the configuration then, which make things clearer. Analogically, `AH_TOP' can be used to prepend a boilerplate code. In order to do its job, `autoheader' needs you to document all of the symbols that you might use. Typically this is done via an `AC_DEFINE' or `AC_DEFINE_UNQUOTED' call whose first argument is a literal symbol and whose third argument describes the symbol (*note Defining Symbols::). Alternatively, you can use `AH_TEMPLATE' (*note Autoheader Macros::), or you can supply a suitable input file for a subsequent configuration header file. Symbols defined by Autoconf's builtin tests are already documented properly; you need to document only those that you define yourself. You might wonder why `autoheader' is needed: after all, why would `configure' need to "patch" a `config.h.in' to produce a `config.h' instead of just creating `config.h' from scratch? Well, when everything rocks, the answer is just that we are wasting our time maintaining `autoheader': generating `config.h' directly is all that is needed. When things go wrong, however, you'll be thankful for the existence of `autoheader'. The fact that the symbols are documented is important in order to _check_ that `config.h' makes sense. The fact that there is a well-defined list of symbols that should be defined (or not) is also important for people who are porting packages to environments where `configure' cannot be run: they just have to _fill in the blanks_. But let's come back to the point: the invocation of `autoheader'... If you give `autoheader' an argument, it uses that file instead of `configure.ac' and writes the header file to the standard output instead of to `config.h.in'. If you give `autoheader' an argument of `-', it reads the standard input instead of `configure.ac' and writes the header file to the standard output. `autoheader' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' `-v' Report processing steps. `--debug' `-d' Don't remove the temporary files. `--force' `-f' Remake the template file even if newer than its input files. `--include=DIR' `-I DIR' Append DIR to the include path. Multiple invocations accumulate. `--prepend-include=DIR' `-B DIR' Prepend DIR to the include path. Multiple invocations accumulate. `--warnings=CATEGORY' `-W CATEGORY' Report the warnings related to CATEGORY (which can actually be a comma separated list). Current categories include: `obsolete' report the uses of obsolete constructs `all' report all the warnings `none' report none `error' treats warnings as errors `no-CATEGORY' disable warnings falling into CATEGORY  File: autoconf.info, Node: Autoheader Macros, Prev: autoheader Invocation, Up: Configuration Headers 4.9.3 Autoheader Macros ----------------------- `autoheader' scans `configure.ac' and figures out which C preprocessor symbols it might define. It knows how to generate templates for symbols defined by `AC_CHECK_HEADERS', `AC_CHECK_FUNCS' etc., but if you `AC_DEFINE' any additional symbol, you must define a template for it. If there are missing templates, `autoheader' fails with an error message. The template for a SYMBOL is created by `autoheader' from the DESCRIPTION argument to an `AC_DEFINE'; see *note Defining Symbols::. For special needs, you can use the following macros. -- Macro: AH_TEMPLATE (KEY, DESCRIPTION) Tell `autoheader' to generate a template for KEY. This macro generates standard templates just like `AC_DEFINE' when a DESCRIPTION is given. For example: AH_TEMPLATE([CRAY_STACKSEG_END], [Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems. This function is required for alloca.c support on those systems.]) generates the following template, with the description properly justified. /* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems. This function is required for alloca.c support on those systems. */ #undef CRAY_STACKSEG_END -- Macro: AH_VERBATIM (KEY, TEMPLATE) Tell `autoheader' to include the TEMPLATE as-is in the header template file. This TEMPLATE is associated with the KEY, which is used to sort all the different templates and guarantee their uniqueness. It should be a symbol that can be defined via `AC_DEFINE'. -- Macro: AH_TOP (TEXT) Include TEXT at the top of the header template file. -- Macro: AH_BOTTOM (TEXT) Include TEXT at the bottom of the header template file. Please note that TEXT gets included "verbatim" to the template file, not to the resulting config header, so it can easily get mangled when the template is processed. There is rarely a need for something other than AH_BOTTOM([#include ])  File: autoconf.info, Node: Configuration Commands, Next: Configuration Links, Prev: Configuration Headers, Up: Setup 4.10 Running Arbitrary Configuration Commands ============================================= You can execute arbitrary commands before, during, and after `config.status' is run. The three following macros accumulate the commands to run when they are called multiple times. `AC_CONFIG_COMMANDS' replaces the obsolete macro `AC_OUTPUT_COMMANDS'; see *note Obsolete Macros::, for details. -- Macro: AC_CONFIG_COMMANDS (TAG..., [CMDS], [INIT-CMDS]) Specify additional shell commands to run at the end of `config.status', and shell commands to initialize any variables from `configure'. Associate the commands with TAG. Since typically the CMDS create a file, TAG should naturally be the name of that file. If needed, the directory hosting TAG is created. This macro is one of the instantiating macros; see *note Configuration Actions::. Here is an unrealistic example: fubar=42 AC_CONFIG_COMMANDS([fubar], [echo this is extra $fubar, and so on.], [fubar=$fubar]) Here is a better one: AC_CONFIG_COMMANDS([timestamp], [date >timestamp]) The following two macros look similar, but in fact they are not of the same breed: they are executed directly by `configure', so you cannot use `config.status' to rerun them. -- Macro: AC_CONFIG_COMMANDS_PRE (CMDS) Execute the CMDS right before creating `config.status'. This macro presents the last opportunity to call `AC_SUBST', `AC_DEFINE', or `AC_CONFIG_ITEMS' macros. -- Macro: AC_CONFIG_COMMANDS_POST (CMDS) Execute the CMDS right after creating `config.status'.  File: autoconf.info, Node: Configuration Links, Next: Subdirectories, Prev: Configuration Commands, Up: Setup 4.11 Creating Configuration Links ================================= You may find it convenient to create links whose destinations depend upon results of tests. One can use `AC_CONFIG_COMMANDS' but the creation of relative symbolic links can be delicate when the package is built in a directory different from the source directory. -- Macro: AC_CONFIG_LINKS (DEST:SOURCE..., [CMDS], [INIT-CMDS]) Make `AC_OUTPUT' link each of the existing files SOURCE to the corresponding link name DEST. Makes a symbolic link if possible, otherwise a hard link if possible, otherwise a copy. The DEST and SOURCE names should be relative to the top level source or build directory. This macro is one of the instantiating macros; see *note Configuration Actions::. For example, this call: AC_CONFIG_LINKS([host.h:config/$machine.h object.h:config/$obj_format.h]) creates in the current directory `host.h' as a link to `SRCDIR/config/$machine.h', and `object.h' as a link to `SRCDIR/config/$obj_format.h'. The tempting value `.' for DEST is invalid: it makes it impossible for `config.status' to guess the links to establish. One can then run: ./config.status host.h object.h to create the links.  File: autoconf.info, Node: Subdirectories, Next: Default Prefix, Prev: Configuration Links, Up: Setup 4.12 Configuring Other Packages in Subdirectories ================================================= In most situations, calling `AC_OUTPUT' is sufficient to produce makefiles in subdirectories. However, `configure' scripts that control more than one independent package can use `AC_CONFIG_SUBDIRS' to run `configure' scripts for other packages in subdirectories. -- Macro: AC_CONFIG_SUBDIRS (DIR ...) Make `AC_OUTPUT' run `configure' in each subdirectory DIR in the given blank-or-newline-separated list. Each DIR should be a literal, i.e., please do not use: if test "x$package_foo_enabled" = xyes; then my_subdirs="$my_subdirs foo" fi AC_CONFIG_SUBDIRS([$my_subdirs]) because this prevents `./configure --help=recursive' from displaying the options of the package `foo'. Instead, you should write: if test "x$package_foo_enabled" = xyes; then AC_CONFIG_SUBDIRS([foo]) fi If a given DIR is not found at `configure' run time, a warning is reported; if the subdirectory is optional, write: if test -d "$srcdir/foo"; then AC_CONFIG_SUBDIRS([foo]) fi If a given DIR contains `configure.gnu', it is run instead of `configure'. This is for packages that might use a non-Autoconf script `Configure', which can't be called through a wrapper `configure' since it would be the same file on case-insensitive file systems. Likewise, if a DIR contains `configure.in' but no `configure', the Cygnus `configure' script found by `AC_CONFIG_AUX_DIR' is used. The subdirectory `configure' scripts are given the same command line options that were given to this `configure' script, with minor changes if needed, which include: - adjusting a relative name for the cache file; - adjusting a relative name for the source directory; - propagating the current value of `$prefix', including if it was defaulted, and if the default values of the top level and of the subdirectory `configure' differ. This macro also sets the output variable `subdirs' to the list of directories `DIR ...'. Make rules can use this variable to determine which subdirectories to recurse into. This macro may be called multiple times.  File: autoconf.info, Node: Default Prefix, Prev: Subdirectories, Up: Setup 4.13 Default Prefix =================== By default, `configure' sets the prefix for files it installs to `/usr/local'. The user of `configure' can select a different prefix using the `--prefix' and `--exec-prefix' options. There are two ways to change the default: when creating `configure', and when running it. Some software packages might want to install in a directory other than `/usr/local' by default. To accomplish that, use the `AC_PREFIX_DEFAULT' macro. -- Macro: AC_PREFIX_DEFAULT (PREFIX) Set the default installation prefix to PREFIX instead of `/usr/local'. It may be convenient for users to have `configure' guess the installation prefix from the location of a related program that they have already installed. If you wish to do that, you can call `AC_PREFIX_PROGRAM'. -- Macro: AC_PREFIX_PROGRAM (PROGRAM) If the user did not specify an installation prefix (using the `--prefix' option), guess a value for it by looking for PROGRAM in `PATH', the way the shell does. If PROGRAM is found, set the prefix to the parent of the directory containing PROGRAM, else default the prefix as described above (`/usr/local' or `AC_PREFIX_DEFAULT'). For example, if PROGRAM is `gcc' and the `PATH' contains `/usr/local/gnu/bin/gcc', set the prefix to `/usr/local/gnu'.  File: autoconf.info, Node: Existing Tests, Next: Writing Tests, Prev: Setup, Up: Top 5 Existing Tests **************** These macros test for particular system features that packages might need or want to use. If you need to test for a kind of feature that none of these macros check for, you can probably do it by calling primitive test macros with appropriate arguments (*note Writing Tests::). These tests print messages telling the user which feature they're checking for, and what they find. They cache their results for future `configure' runs (*note Caching Results::). Some of these macros set output variables. *Note Makefile Substitutions::, for how to get their values. The phrase "define NAME" is used below as a shorthand to mean "define the C preprocessor symbol NAME to the value 1". *Note Defining Symbols::, for how to get those symbol definitions into your program. * Menu: * Common Behavior:: Macros' standard schemes * Alternative Programs:: Selecting between alternative programs * Files:: Checking for the existence of files * Libraries:: Library archives that might be missing * Library Functions:: C library functions that might be missing * Header Files:: Header files that might be missing * Declarations:: Declarations that may be missing * Structures:: Structures or members that might be missing * Types:: Types that might be missing * Compilers and Preprocessors:: Checking for compiling programs * System Services:: Operating system services * Posix Variants:: Special kludges for specific Posix variants * Erlang Libraries:: Checking for the existence of Erlang libraries  File: autoconf.info, Node: Common Behavior, Next: Alternative Programs, Up: Existing Tests 5.1 Common Behavior =================== Much effort has been expended to make Autoconf easy to learn. The most obvious way to reach this goal is simply to enforce standard interfaces and behaviors, avoiding exceptions as much as possible. Because of history and inertia, unfortunately, there are still too many exceptions in Autoconf; nevertheless, this section describes some of the common rules. * Menu: * Standard Symbols:: Symbols defined by the macros * Default Includes:: Includes used by the generic macros  File: autoconf.info, Node: Standard Symbols, Next: Default Includes, Up: Common Behavior 5.1.1 Standard Symbols ---------------------- All the generic macros that `AC_DEFINE' a symbol as a result of their test transform their ARGUMENT values to a standard alphabet. First, ARGUMENT is converted to upper case and any asterisks (`*') are each converted to `P'. Any remaining characters that are not alphanumeric are converted to underscores. For instance, AC_CHECK_TYPES([struct $Expensive*]) defines the symbol `HAVE_STRUCT__EXPENSIVEP' if the check succeeds.  File: autoconf.info, Node: Default Includes, Prev: Standard Symbols, Up: Common Behavior 5.1.2 Default Includes ---------------------- Several tests depend upon a set of header files. Since these headers are not universally available, tests actually have to provide a set of protected includes, such as: #ifdef TIME_WITH_SYS_TIME # include # include #else # ifdef HAVE_SYS_TIME_H # include # else # include # endif #endif Unless you know exactly what you are doing, you should avoid using unconditional includes, and check the existence of the headers you include beforehand (*note Header Files::). Most generic macros use the following macro to provide the default set of includes: -- Macro: AC_INCLUDES_DEFAULT ([INCLUDE-DIRECTIVES]) Expand to INCLUDE-DIRECTIVES if defined, otherwise to: #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif If the default includes are used, then check for the presence of these headers and their compatibility, i.e., you don't need to run `AC_HEADER_STDC', nor check for `stdlib.h' etc. These headers are checked for in the same order as they are included. For instance, on some systems `string.h' and `strings.h' both exist, but conflict. Then `HAVE_STRING_H' is defined, not `HAVE_STRINGS_H'.  File: autoconf.info, Node: Alternative Programs, Next: Files, Prev: Common Behavior, Up: Existing Tests 5.2 Alternative Programs ======================== These macros check for the presence or behavior of particular programs. They are used to choose between several alternative programs and to decide what to do once one has been chosen. If there is no macro specifically defined to check for a program you need, and you don't need to check for any special properties of it, then you can use one of the general program-check macros. * Menu: * Particular Programs:: Special handling to find certain programs * Generic Programs:: How to find other programs  File: autoconf.info, Node: Particular Programs, Next: Generic Programs, Up: Alternative Programs 5.2.1 Particular Program Checks ------------------------------- These macros check for particular programs--whether they exist, and in some cases whether they support certain features. -- Macro: AC_PROG_AWK Check for `gawk', `mawk', `nawk', and `awk', in that order, and set output variable `AWK' to the first one that is found. It tries `gawk' first because that is reported to be the best implementation. The result can be overridden by setting the variable `AWK' or the cache variable `ac_cv_prog_AWK'. Using this macro is sufficient to avoid the pitfalls of traditional `awk' (*note Limitations of Usual Tools: awk.). -- Macro: AC_PROG_GREP Look for the best available `grep' or `ggrep' that accepts the longest input lines possible, and that supports multiple `-e' options. Set the output variable `GREP' to whatever is chosen. *Note Limitations of Usual Tools: grep, for more information about portability problems with the `grep' command family. The result can be overridden by setting the `GREP' variable and is cached in the `ac_cv_path_GREP' variable. -- Macro: AC_PROG_EGREP Check whether `$GREP -E' works, or else look for the best available `egrep' or `gegrep' that accepts the longest input lines possible. Set the output variable `EGREP' to whatever is chosen. The result can be overridden by setting the `EGREP' variable and is cached in the `ac_cv_path_EGREP' variable. -- Macro: AC_PROG_FGREP Check whether `$GREP -F' works, or else look for the best available `fgrep' or `gfgrep' that accepts the longest input lines possible. Set the output variable `FGREP' to whatever is chosen. The result can be overridden by setting the `FGREP' variable and is cached in the `ac_cv_path_FGREP' variable. -- Macro: AC_PROG_INSTALL Set output variable `INSTALL' to the name of a BSD-compatible `install' program, if one is found in the current `PATH'. Otherwise, set `INSTALL' to `DIR/install-sh -c', checking the directories specified to `AC_CONFIG_AUX_DIR' (or its default directories) to determine DIR (*note Output::). Also set the variables `INSTALL_PROGRAM' and `INSTALL_SCRIPT' to `${INSTALL}' and `INSTALL_DATA' to `${INSTALL} -m 644'. `@INSTALL@' is special, as its value may vary for different configuration files. This macro screens out various instances of `install' known not to work. It prefers to find a C program rather than a shell script, for speed. Instead of `install-sh', it can also use `install.sh', but that name is obsolete because some `make' programs have a rule that creates `install' from it if there is no makefile. Further, this macro requires `install' to be able to install multiple files into a target directory in a single invocation. Autoconf comes with a copy of `install-sh' that you can use. If you use `AC_PROG_INSTALL', you must include either `install-sh' or `install.sh' in your distribution; otherwise `configure' produces an error message saying it can't find them--even if the system you're on has a good `install' program. This check is a safety measure to prevent you from accidentally leaving that file out, which would prevent your package from installing on systems that don't have a BSD-compatible `install' program. If you need to use your own installation program because it has features not found in standard `install' programs, there is no reason to use `AC_PROG_INSTALL'; just put the file name of your program into your `Makefile.in' files. The result of the test can be overridden by setting the variable `INSTALL' or the cache variable `ac_cv_path_install'. -- Macro: AC_PROG_MKDIR_P Set output variable `MKDIR_P' to a program that ensures that for each argument, a directory named by this argument exists, creating it and its parent directories if needed, and without race conditions when two instances of the program attempt to make the same directory at nearly the same time. This macro uses the `mkdir -p' command if possible. Otherwise, it falls back on invoking `install-sh' with the `-d' option, so your package should contain `install-sh' as described under `AC_PROG_INSTALL'. An `install-sh' file that predates Autoconf 2.60 or Automake 1.10 is vulnerable to race conditions, so if you want to support parallel installs from different packages into the same directory you need to make sure you have an up-to-date `install-sh'. In particular, be careful about using `autoreconf -if' if your Automake predates Automake 1.10. This macro is related to the `AS_MKDIR_P' macro (*note Programming in M4sh::), but it sets an output variable intended for use in other files, whereas `AS_MKDIR_P' is intended for use in scripts like `configure'. Also, `AS_MKDIR_P' does not accept options, but `MKDIR_P' supports the `-m' option, e.g., a makefile might invoke `$(MKDIR_P) -m 0 dir' to create an inaccessible directory, and conversely a makefile should use `$(MKDIR_P) -- $(FOO)' if FOO might yield a value that begins with `-'. Finally, `AS_MKDIR_P' does not check for race condition vulnerability, whereas `AC_PROG_MKDIR_P' does. `@MKDIR_P@' is special, as its value may vary for different configuration files. The result of the test can be overridden by setting the variable `MKDIR_P' or the cache variable `ac_cv_path_mkdir'. -- Macro: AC_PROG_LEX If `flex' is found, set output variable `LEX' to `flex' and `LEXLIB' to `-lfl', if that library is in a standard place. Otherwise set `LEX' to `lex' and `LEXLIB' to `-ll', if found. If neither variant is available, set `LEX' to `:'; for packages that ship the generated `file.yy.c' alongside the source `file.l', this default allows users without a lexer generator to still build the package even if the timestamp for `file.l' is inadvertently changed. Define `YYTEXT_POINTER' if `yytext' defaults to `char *' instead of to `char []'. Also set output variable `LEX_OUTPUT_ROOT' to the base of the file name that the lexer generates; usually `lex.yy', but sometimes something else. These results vary according to whether `lex' or `flex' is being used. You are encouraged to use Flex in your sources, since it is both more pleasant to use than plain Lex and the C source it produces is portable. In order to ensure portability, however, you must either provide a function `yywrap' or, if you don't use it (e.g., your scanner has no `#include'-like feature), simply include a `%noyywrap' statement in the scanner's source. Once this done, the scanner is portable (unless _you_ felt free to use nonportable constructs) and does not depend on any library. In this case, and in this case only, it is suggested that you use this Autoconf snippet: AC_PROG_LEX if test "x$LEX" != xflex; then LEX="$SHELL $missing_dir/missing flex" AC_SUBST([LEX_OUTPUT_ROOT], [lex.yy]) AC_SUBST([LEXLIB], ['']) fi The shell script `missing' can be found in the Automake distribution. Remember that the user may have supplied an alternate location in `LEX', so if Flex is required, it is better to check that the user provided something sufficient by parsing the output of `$LEX --version' than by simply relying on `test "x$LEX" = xflex'. To ensure backward compatibility, Automake's `AM_PROG_LEX' invokes (indirectly) this macro twice, which causes an annoying but benign "`AC_PROG_LEX' invoked multiple times" warning. Future versions of Automake will fix this issue; meanwhile, just ignore this message. As part of running the test, this macro may delete any file in the configuration directory named `lex.yy.c' or `lexyy.c'. The result of this test can be influenced by setting the variable `LEX' or the cache variable `ac_cv_prog_LEX'. -- Macro: AC_PROG_LN_S If `ln -s' works on the current file system (the operating system and file system support symbolic links), set the output variable `LN_S' to `ln -s'; otherwise, if `ln' works, set `LN_S' to `ln', and otherwise set it to `cp -pR'. If you make a link in a directory other than the current directory, its meaning depends on whether `ln' or `ln -s' is used. To safely create links using `$(LN_S)', either find out which form is used and adjust the arguments, or always invoke `ln' in the directory where the link is to be created. In other words, it does not work to do: $(LN_S) foo /x/bar Instead, do: (cd /x && $(LN_S) foo bar) -- Macro: AC_PROG_RANLIB Set output variable `RANLIB' to `ranlib' if `ranlib' is found, and otherwise to `:' (do nothing). -- Macro: AC_PROG_SED Set output variable `SED' to a Sed implementation that conforms to Posix and does not have arbitrary length limits. Report an error if no acceptable Sed is found. *Note Limitations of Usual Tools: sed, for more information about portability problems with Sed. The result of this test can be overridden by setting the `SED' variable and is cached in the `ac_cv_path_SED' variable. -- Macro: AC_PROG_YACC If `bison' is found, set output variable `YACC' to `bison -y'. Otherwise, if `byacc' is found, set `YACC' to `byacc'. Otherwise set `YACC' to `yacc'. The result of this test can be influenced by setting the variable `YACC' or the cache variable `ac_cv_prog_YACC'.  File: autoconf.info, Node: Generic Programs, Prev: Particular Programs, Up: Alternative Programs 5.2.2 Generic Program and File Checks ------------------------------------- These macros are used to find programs not covered by the "particular" test macros. If you need to check the behavior of a program as well as find out whether it is present, you have to write your own test for it (*note Writing Tests::). By default, these macros use the environment variable `PATH'. If you need to check for a program that might not be in the user's `PATH', you can pass a modified path to use instead, like this: AC_PATH_PROG([INETD], [inetd], [/usr/libexec/inetd], [$PATH$PATH_SEPARATOR/usr/libexec$PATH_SEPARATOR]dnl [/usr/sbin$PATH_SEPARATOR/usr/etc$PATH_SEPARATOR/etc]) You are strongly encouraged to declare the VARIABLE passed to `AC_CHECK_PROG' etc. as precious. *Note Setting Output Variables::, `AC_ARG_VAR', for more details. -- Macro: AC_CHECK_PROG (VARIABLE, PROG-TO-CHECK-FOR, VALUE-IF-FOUND, [VALUE-IF-NOT-FOUND], [PATH = `$PATH'], [REJECT]) Check whether program PROG-TO-CHECK-FOR exists in PATH. If it is found, set VARIABLE to VALUE-IF-FOUND, otherwise to VALUE-IF-NOT-FOUND, if given. Always pass over REJECT (an absolute file name) even if it is the first found in the search path; in that case, set VARIABLE using the absolute file name of the PROG-TO-CHECK-FOR found that is not REJECT. If VARIABLE was already set, do nothing. Calls `AC_SUBST' for VARIABLE. The result of this test can be overridden by setting the VARIABLE variable or the cache variable `ac_cv_prog_VARIABLE'. -- Macro: AC_CHECK_PROGS (VARIABLE, PROGS-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH = `$PATH']) Check for each program in the blank-separated list PROGS-TO-CHECK-FOR existing in the PATH. If one is found, set VARIABLE to the name of that program. Otherwise, continue checking the next program in the list. If none of the programs in the list are found, set VARIABLE to VALUE-IF-NOT-FOUND; if VALUE-IF-NOT-FOUND is not specified, the value of VARIABLE is not changed. Calls `AC_SUBST' for VARIABLE. The result of this test can be overridden by setting the VARIABLE variable or the cache variable `ac_cv_prog_VARIABLE'. -- Macro: AC_CHECK_TARGET_TOOL (VARIABLE, PROG-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH = `$PATH']) Like `AC_CHECK_PROG', but first looks for PROG-TO-CHECK-FOR with a prefix of the target type as determined by `AC_CANONICAL_TARGET', followed by a dash (*note Canonicalizing::). If the tool cannot be found with a prefix, and if the build and target types are equal, then it is also searched for without a prefix. As noted in *note Specifying Target Triplets::, the target is rarely specified, because most of the time it is the same as the host: it is the type of system for which any compiler tool in the package produces code. What this macro looks for is, for example, _a tool (assembler, linker, etc.) that the compiler driver (`gcc' for the GNU C Compiler) uses to produce objects, archives or executables_. -- Macro: AC_CHECK_TOOL (VARIABLE, PROG-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH = `$PATH']) Like `AC_CHECK_PROG', but first looks for PROG-TO-CHECK-FOR with a prefix of the host type as specified by `--host', followed by a dash. For example, if the user runs `configure --build=x86_64-gnu --host=i386-gnu', then this call: AC_CHECK_TOOL([RANLIB], [ranlib], [:]) sets `RANLIB' to `i386-gnu-ranlib' if that program exists in PATH, or otherwise to `ranlib' if that program exists in PATH, or to `:' if neither program exists. When cross-compiling, this macro will issue a warning if no program prefixed with the host type could be found. For more information, see *note Specifying Target Triplets::. -- Macro: AC_CHECK_TARGET_TOOLS (VARIABLE, PROGS-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH = `$PATH']) Like `AC_CHECK_TARGET_TOOL', each of the tools in the list PROGS-TO-CHECK-FOR are checked with a prefix of the target type as determined by `AC_CANONICAL_TARGET', followed by a dash (*note Canonicalizing::). If none of the tools can be found with a prefix, and if the build and target types are equal, then the first one without a prefix is used. If a tool is found, set VARIABLE to the name of that program. If none of the tools in the list are found, set VARIABLE to VALUE-IF-NOT-FOUND; if VALUE-IF-NOT-FOUND is not specified, the value of VARIABLE is not changed. Calls `AC_SUBST' for VARIABLE. -- Macro: AC_CHECK_TOOLS (VARIABLE, PROGS-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH = `$PATH']) Like `AC_CHECK_TOOL', each of the tools in the list PROGS-TO-CHECK-FOR are checked with a prefix of the host type as determined by `AC_CANONICAL_HOST', followed by a dash (*note Canonicalizing::). If none of the tools can be found with a prefix, then the first one without a prefix is used. If a tool is found, set VARIABLE to the name of that program. If none of the tools in the list are found, set VARIABLE to VALUE-IF-NOT-FOUND; if VALUE-IF-NOT-FOUND is not specified, the value of VARIABLE is not changed. Calls `AC_SUBST' for VARIABLE. When cross-compiling, this macro will issue a warning if no program prefixed with the host type could be found. For more information, see *note Specifying Target Triplets::. -- Macro: AC_PATH_PROG (VARIABLE, PROG-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH = `$PATH']) Like `AC_CHECK_PROG', but set VARIABLE to the absolute name of PROG-TO-CHECK-FOR if found. The result of this test can be overridden by setting the VARIABLE variable. A positive result of this test is cached in the `ac_cv_path_VARIABLE' variable. -- Macro: AC_PATH_PROGS (VARIABLE, PROGS-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH = `$PATH']) Like `AC_CHECK_PROGS', but if any of PROGS-TO-CHECK-FOR are found, set VARIABLE to the absolute name of the program found. The result of this test can be overridden by setting the VARIABLE variable. A positive result of this test is cached in the `ac_cv_path_VARIABLE' variable. -- Macro: AC_PATH_PROGS_FEATURE_CHECK (VARIABLE, PROGS-TO-CHECK-FOR, FEATURE-TEST, [ACTION-IF-NOT-FOUND], [PATH = `$PATH']) This macro was introduced in Autoconf 2.62. If VARIABLE is not empty, then set the cache variable `ac_cv_path_VARIABLE' to its value. Otherwise, check for each program in the blank-separated list PROGS-TO-CHECK-FOR existing in PATH. For each program found, execute FEATURE-TEST with `ac_path_VARIABLE' set to the absolute name of the candidate program. If no invocation of FEATURE-TEST sets the shell variable `ac_cv_path_VARIABLE', then ACTION-IF-NOT-FOUND is executed. FEATURE-TEST will be run even when `ac_cv_path_VARIABLE' is set, to provide the ability to choose a better candidate found later in PATH; to accept the current setting and bypass all further checks, FEATURE-TEST can execute `ac_path_VARIABLE_found=:'. Note that this macro has some subtle differences from `AC_CHECK_PROGS'. It is designed to be run inside `AC_CACHE_VAL', therefore, it should have no side effects. In particular, VARIABLE is not set to the final value of `ac_cv_path_VARIABLE', nor is `AC_SUBST' automatically run. Also, on failure, any action can be performed, whereas `AC_CHECK_PROGS' only performs `VARIABLE=VALUE-IF-NOT-FOUND'. Here is an example, similar to what Autoconf uses in its own configure script. It will search for an implementation of `m4' that supports the `indir' builtin, even if it goes by the name `gm4' or is not the first implementation on `PATH'. AC_CACHE_CHECK([for m4 that supports indir], [ac_cv_path_M4], [AC_PATH_PROGS_FEATURE_CHECK([M4], [m4 gm4], [[m4out=`echo 'changequote([,])indir([divnum])' | $ac_path_M4` test "x$m4out" = x0 \ && ac_cv_path_M4=$ac_path_M4 ac_path_M4_found=:]], [AC_MSG_ERROR([could not find m4 that supports indir])])]) AC_SUBST([M4], [$ac_cv_path_M4]) -- Macro: AC_PATH_TARGET_TOOL (VARIABLE, PROG-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH = `$PATH']) Like `AC_CHECK_TARGET_TOOL', but set VARIABLE to the absolute name of the program if it is found. -- Macro: AC_PATH_TOOL (VARIABLE, PROG-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH = `$PATH']) Like `AC_CHECK_TOOL', but set VARIABLE to the absolute name of the program if it is found. When cross-compiling, this macro will issue a warning if no program prefixed with the host type could be found. For more information, see *note Specifying Target Triplets::.  File: autoconf.info, Node: Files, Next: Libraries, Prev: Alternative Programs, Up: Existing Tests 5.3 Files ========= You might also need to check for the existence of files. Before using these macros, ask yourself whether a runtime test might not be a better solution. Be aware that, like most Autoconf macros, they test a feature of the host machine, and therefore, they die when cross-compiling. -- Macro: AC_CHECK_FILE (FILE, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) Check whether file FILE exists on the native system. If it is found, execute ACTION-IF-FOUND, otherwise do ACTION-IF-NOT-FOUND, if given. The result of this test is cached in the `ac_cv_file_FILE' variable, with characters not suitable for a variable name mapped to underscores. -- Macro: AC_CHECK_FILES (FILES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) Executes `AC_CHECK_FILE' once for each file listed in FILES. Additionally, defines `HAVE_FILE' (*note Standard Symbols::) for each file found. The results of each test are cached in the `ac_cv_file_FILE' variable, with characters not suitable for a variable name mapped to underscores.  File: autoconf.info, Node: Libraries, Next: Library Functions, Prev: Files, Up: Existing Tests 5.4 Library Files ================= The following macros check for the presence of certain C, C++, Fortran, or Go library archive files. -- Macro: AC_CHECK_LIB (LIBRARY, FUNCTION, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [OTHER-LIBRARIES]) Test whether the library LIBRARY is available by trying to link a test program that calls function FUNCTION with the library. FUNCTION should be a function provided by the library. Use the base name of the library; e.g., to check for `-lmp', use `mp' as the LIBRARY argument. ACTION-IF-FOUND is a list of shell commands to run if the link with the library succeeds; ACTION-IF-NOT-FOUND is a list of shell commands to run if the link fails. If ACTION-IF-FOUND is not specified, the default action prepends `-lLIBRARY' to `LIBS' and defines `HAVE_LIBLIBRARY' (in all capitals). This macro is intended to support building `LIBS' in a right-to-left (least-dependent to most-dependent) fashion such that library dependencies are satisfied as a natural side effect of consecutive tests. Linkers are sensitive to library ordering so the order in which `LIBS' is generated is important to reliable detection of libraries. If linking with LIBRARY results in unresolved symbols that would be resolved by linking with additional libraries, give those libraries as the OTHER-LIBRARIES argument, separated by spaces: e.g., `-lXt -lX11'. Otherwise, this macro may fail to detect that LIBRARY is present, because linking the test program can fail with unresolved symbols. The OTHER-LIBRARIES argument should be limited to cases where it is desirable to test for one library in the presence of another that is not already in `LIBS'. `AC_CHECK_LIB' requires some care in usage, and should be avoided in some common cases. Many standard functions like `gethostbyname' appear in the standard C library on some hosts, and in special libraries like `nsl' on other hosts. On some hosts the special libraries contain variant implementations that you may not want to use. These days it is normally better to use `AC_SEARCH_LIBS([gethostbyname], [nsl])' instead of `AC_CHECK_LIB([nsl], [gethostbyname])'. The result of this test is cached in the `ac_cv_lib_LIBRARY_FUNCTION' variable. -- Macro: AC_SEARCH_LIBS (FUNCTION, SEARCH-LIBS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [OTHER-LIBRARIES]) Search for a library defining FUNCTION if it's not already available. This equates to calling `AC_LINK_IFELSE([AC_LANG_CALL([], [FUNCTION])])' first with no libraries, then for each library listed in SEARCH-LIBS. Prepend `-lLIBRARY' to `LIBS' for the first library found to contain FUNCTION, and run ACTION-IF-FOUND. If the function is not found, run ACTION-IF-NOT-FOUND. If linking with LIBRARY results in unresolved symbols that would be resolved by linking with additional libraries, give those libraries as the OTHER-LIBRARIES argument, separated by spaces: e.g., `-lXt -lX11'. Otherwise, this macro fails to detect that FUNCTION is present, because linking the test program always fails with unresolved symbols. The result of this test is cached in the `ac_cv_search_FUNCTION' variable as `none required' if FUNCTION is already available, as `no' if no library containing FUNCTION was found, otherwise as the `-lLIBRARY' option that needs to be prepended to `LIBS'.  File: autoconf.info, Node: Library Functions, Next: Header Files, Prev: Libraries, Up: Existing Tests 5.5 Library Functions ===================== The following macros check for particular C library functions. If there is no macro specifically defined to check for a function you need, and you don't need to check for any special properties of it, then you can use one of the general function-check macros. * Menu: * Function Portability:: Pitfalls with usual functions * Particular Functions:: Special handling to find certain functions * Generic Functions:: How to find other functions  File: autoconf.info, Node: Function Portability, Next: Particular Functions, Up: Library Functions 5.5.1 Portability of C Functions -------------------------------- Most usual functions can either be missing, or be buggy, or be limited on some architectures. This section tries to make an inventory of these portability issues. By definition, this list always requires additions. A much more complete list is maintained by the Gnulib project (*note Gnulib::), covering *note Current Posix Functions: (gnulib)Function Substitutes, *note Legacy Functions: (gnulib)Legacy Function Substitutes, and *note Glibc Functions: (gnulib)Glibc Function Substitutes. Please help us keep the gnulib list as complete as possible. `exit' On ancient hosts, `exit' returned `int'. This is because `exit' predates `void', and there was a long tradition of it returning `int'. On current hosts, the problem more likely is that `exit' is not declared, due to C++ problems of some sort or another. For this reason we suggest that test programs not invoke `exit', but return from `main' instead. `free' The C standard says a call `free (NULL)' does nothing, but some old systems don't support this (e.g., NextStep). `isinf' `isnan' The C99 standard says that `isinf' and `isnan' are macros. On some systems just macros are available (e.g., HP-UX and Solaris 10), on some systems both macros and functions (e.g., glibc 2.3.2), and on some systems only functions (e.g., IRIX 6 and Solaris 9). In some cases these functions are declared in nonstandard headers like `' and defined in non-default libraries like `-lm' or `-lsunmath'. The C99 `isinf' and `isnan' macros work correctly with `long double' arguments, but pre-C99 systems that use functions typically assume `double' arguments. On such a system, `isinf' incorrectly returns true for a finite `long double' argument that is outside the range of `double'. The best workaround for these issues is to use gnulib modules `isinf' and `isnan' (*note Gnulib::). But a lighter weight solution involves code like the following. #include #ifndef isnan # define isnan(x) \ (sizeof (x) == sizeof (long double) ? isnan_ld (x) \ : sizeof (x) == sizeof (double) ? isnan_d (x) \ : isnan_f (x)) static inline int isnan_f (float x) { return x != x; } static inline int isnan_d (double x) { return x != x; } static inline int isnan_ld (long double x) { return x != x; } #endif #ifndef isinf # define isinf(x) \ (sizeof (x) == sizeof (long double) ? isinf_ld (x) \ : sizeof (x) == sizeof (double) ? isinf_d (x) \ : isinf_f (x)) static inline int isinf_f (float x) { return !isnan (x) && isnan (x - x); } static inline int isinf_d (double x) { return !isnan (x) && isnan (x - x); } static inline int isinf_ld (long double x) { return !isnan (x) && isnan (x - x); } #endif Use `AC_C_INLINE' (*note C Compiler::) so that this code works on compilers that lack the `inline' keyword. Some optimizing compilers mishandle these definitions, but systems with that bug typically have many other floating point corner-case compliance problems anyway, so it's probably not worth worrying about. `malloc' The C standard says a call `malloc (0)' is implementation dependent. It can return either `NULL' or a new non-null pointer. The latter is more common (e.g., the GNU C Library) but is by no means universal. `AC_FUNC_MALLOC' can be used to insist on non-`NULL' (*note Particular Functions::). `putenv' Posix prefers `setenv' to `putenv'; among other things, `putenv' is not required of all Posix implementations, but `setenv' is. Posix specifies that `putenv' puts the given string directly in `environ', but some systems make a copy of it instead (e.g., glibc 2.0, or BSD). And when a copy is made, `unsetenv' might not free it, causing a memory leak (e.g., FreeBSD 4). On some systems `putenv ("FOO")' removes `FOO' from the environment, but this is not standard usage and it dumps core on some systems (e.g., AIX). On MinGW, a call `putenv ("FOO=")' removes `FOO' from the environment, rather than inserting it with an empty value. `realloc' The C standard says a call `realloc (NULL, size)' is equivalent to `malloc (size)', but some old systems don't support this (e.g., NextStep). `signal' handler Normally `signal' takes a handler function with a return type of `void', but some old systems required `int' instead. Any actual `int' value returned is not used; this is only a difference in the function prototype demanded. All systems we know of in current use return `void'. The `int' was to support K&R C, where of course `void' is not available. The obsolete macro `AC_TYPE_SIGNAL' (*note AC_TYPE_SIGNAL::) can be used to establish the correct type in all cases. In most cases, it is more robust to use `sigaction' when it is available, rather than `signal'. `snprintf' The C99 standard says that if the output array isn't big enough and if no other errors occur, `snprintf' and `vsnprintf' truncate the output and return the number of bytes that ought to have been produced. Some older systems return the truncated length (e.g., GNU C Library 2.0.x or IRIX 6.5), some a negative value (e.g., earlier GNU C Library versions), and some the buffer length without truncation (e.g., 32-bit Solaris 7). Also, some buggy older systems ignore the length and overrun the buffer (e.g., 64-bit Solaris 7). `sprintf' The C standard says `sprintf' and `vsprintf' return the number of bytes written. On some ancient systems (SunOS 4 for instance) they return the buffer pointer instead, but these no longer need to be worried about. `sscanf' On various old systems, e.g., HP-UX 9, `sscanf' requires that its input string be writable (though it doesn't actually change it). This can be a problem when using `gcc' since it normally puts constant strings in read-only memory (*note Incompatibilities of GCC: (gcc)Incompatibilities.). Apparently in some cases even having format strings read-only can be a problem. `strerror_r' Posix specifies that `strerror_r' returns an `int', but many systems (e.g., GNU C Library version 2.2.4) provide a different version returning a `char *'. `AC_FUNC_STRERROR_R' can detect which is in use (*note Particular Functions::). `strnlen' AIX 4.3 provides a broken version which produces the following results: strnlen ("foobar", 0) = 0 strnlen ("foobar", 1) = 3 strnlen ("foobar", 2) = 2 strnlen ("foobar", 3) = 1 strnlen ("foobar", 4) = 0 strnlen ("foobar", 5) = 6 strnlen ("foobar", 6) = 6 strnlen ("foobar", 7) = 6 strnlen ("foobar", 8) = 6 strnlen ("foobar", 9) = 6 `sysconf' `_SC_PAGESIZE' is standard, but some older systems (e.g., HP-UX 9) have `_SC_PAGE_SIZE' instead. This can be tested with `#ifdef'. `unlink' The Posix spec says that `unlink' causes the given file to be removed only after there are no more open file handles for it. Some non-Posix hosts have trouble with this requirement, though, and some DOS variants even corrupt the file system. `unsetenv' On MinGW, `unsetenv' is not available, but a variable `FOO' can be removed with a call `putenv ("FOO=")', as described under `putenv' above. `va_copy' The C99 standard provides `va_copy' for copying `va_list' variables. It may be available in older environments too, though possibly as `__va_copy' (e.g., `gcc' in strict pre-C99 mode). These can be tested with `#ifdef'. A fallback to `memcpy (&dst, &src, sizeof (va_list))' gives maximum portability. `va_list' `va_list' is not necessarily just a pointer. It can be a `struct' (e.g., `gcc' on Alpha), which means `NULL' is not portable. Or it can be an array (e.g., `gcc' in some PowerPC configurations), which means as a function parameter it can be effectively call-by-reference and library routines might modify the value back in the caller (e.g., `vsnprintf' in the GNU C Library 2.1). Signed `>>' Normally the C `>>' right shift of a signed type replicates the high bit, giving a so-called "arithmetic" shift. But care should be taken since Standard C doesn't require that behavior. On those few processors without a native arithmetic shift (for instance Cray vector systems) zero bits may be shifted in, the same as a shift of an unsigned type. Integer `/' C divides signed integers by truncating their quotient toward zero, yielding the same result as Fortran. However, before C99 the standard allowed C implementations to take the floor or ceiling of the quotient in some cases. Hardly any implementations took advantage of this freedom, though, and it's probably not worth worrying about this issue nowadays.  File: autoconf.info, Node: Particular Functions, Next: Generic Functions, Prev: Function Portability, Up: Library Functions 5.5.2 Particular Function Checks -------------------------------- These macros check for particular C functions--whether they exist, and in some cases how they respond when given certain arguments. -- Macro: AC_FUNC_ALLOCA Check how to get `alloca'. Tries to get a builtin version by checking for `alloca.h' or the predefined C preprocessor macros `__GNUC__' and `_AIX'. If this macro finds `alloca.h', it defines `HAVE_ALLOCA_H'. If those attempts fail, it looks for the function in the standard C library. If any of those methods succeed, it defines `HAVE_ALLOCA'. Otherwise, it sets the output variable `ALLOCA' to `${LIBOBJDIR}alloca.o' and defines `C_ALLOCA' (so programs can periodically call `alloca (0)' to garbage collect). This variable is separate from `LIBOBJS' so multiple programs can share the value of `ALLOCA' without needing to create an actual library, in case only some of them use the code in `LIBOBJS'. The `${LIBOBJDIR}' prefix serves the same purpose as in `LIBOBJS' (*note AC_LIBOBJ vs LIBOBJS::). This macro does not try to get `alloca' from the System V R3 `libPW' or the System V R4 `libucb' because those libraries contain some incompatible functions that cause trouble. Some versions do not even contain `alloca' or contain a buggy version. If you still want to use their `alloca', use `ar' to extract `alloca.o' from them instead of compiling `alloca.c'. Source files that use `alloca' should start with a piece of code like the following, to declare it properly. #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_ALLOCA_H # include #elif !defined alloca # ifdef __GNUC__ # define alloca __builtin_alloca # elif defined _AIX # define alloca __alloca # elif defined _MSC_VER # include # define alloca _alloca # elif !defined HAVE_ALLOCA # ifdef __cplusplus extern "C" # endif void *alloca (size_t); # endif #endif -- Macro: AC_FUNC_CHOWN If the `chown' function is available and works (in particular, it should accept `-1' for `uid' and `gid'), define `HAVE_CHOWN'. The result of this macro is cached in the `ac_cv_func_chown_works' variable. -- Macro: AC_FUNC_CLOSEDIR_VOID If the `closedir' function does not return a meaningful value, define `CLOSEDIR_VOID'. Otherwise, callers ought to check its return value for an error indicator. Currently this test is implemented by running a test program. When cross compiling the pessimistic assumption that `closedir' does not return a meaningful value is made. The result of this macro is cached in the `ac_cv_func_closedir_void' variable. This macro is obsolescent, as `closedir' returns a meaningful value on current systems. New programs need not use this macro. -- Macro: AC_FUNC_ERROR_AT_LINE If the `error_at_line' function is not found, require an `AC_LIBOBJ' replacement of `error'. The result of this macro is cached in the `ac_cv_lib_error_at_line' variable. The `AC_FUNC_ERROR_AT_LINE' macro is obsolescent. New programs should use Gnulib's `error' module. *Note Gnulib::. -- Macro: AC_FUNC_FNMATCH If the `fnmatch' function conforms to Posix, define `HAVE_FNMATCH'. Detect common implementation bugs, for example, the bugs in Solaris 2.4. Unlike the other specific `AC_FUNC' macros, `AC_FUNC_FNMATCH' does not replace a broken/missing `fnmatch'. This is for historical reasons. See `AC_REPLACE_FNMATCH' below. The result of this macro is cached in the `ac_cv_func_fnmatch_works' variable. This macro is obsolescent. New programs should use Gnulib's `fnmatch-posix' module. *Note Gnulib::. -- Macro: AC_FUNC_FNMATCH_GNU Behave like `AC_REPLACE_FNMATCH' (_replace_) but also test whether `fnmatch' supports GNU extensions. Detect common implementation bugs, for example, the bugs in the GNU C Library 2.1. The result of this macro is cached in the `ac_cv_func_fnmatch_gnu' variable. This macro is obsolescent. New programs should use Gnulib's `fnmatch-gnu' module. *Note Gnulib::. -- Macro: AC_FUNC_FORK This macro checks for the `fork' and `vfork' functions. If a working `fork' is found, define `HAVE_WORKING_FORK'. This macro checks whether `fork' is just a stub by trying to run it. If `vfork.h' is found, define `HAVE_VFORK_H'. If a working `vfork' is found, define `HAVE_WORKING_VFORK'. Otherwise, define `vfork' to be `fork' for backward compatibility with previous versions of `autoconf'. This macro checks for several known errors in implementations of `vfork' and considers the system to not have a working `vfork' if it detects any of them. It is not considered to be an implementation error if a child's invocation of `signal' modifies the parent's signal handler, since child processes rarely change their signal handlers. Since this macro defines `vfork' only for backward compatibility with previous versions of `autoconf' you're encouraged to define it yourself in new code: #ifndef HAVE_WORKING_VFORK # define vfork fork #endif The results of this macro are cached in the `ac_cv_func_fork_works' and `ac_cv_func_vfork_works' variables. In order to override the test, you also need to set the `ac_cv_func_fork' and `ac_cv_func_vfork' variables. -- Macro: AC_FUNC_FSEEKO If the `fseeko' function is available, define `HAVE_FSEEKO'. Define `_LARGEFILE_SOURCE' if necessary to make the prototype visible on some systems (e.g., glibc 2.2). Otherwise linkage problems may occur when compiling with `AC_SYS_LARGEFILE' on largefile-sensitive systems where `off_t' does not default to a 64bit entity. All systems with `fseeko' also supply `ftello'. -- Macro: AC_FUNC_GETGROUPS If the `getgroups' function is available and works (unlike on Ultrix 4.3, where `getgroups (0, 0)' always fails), define `HAVE_GETGROUPS'. Set `GETGROUPS_LIBS' to any libraries needed to get that function. This macro runs `AC_TYPE_GETGROUPS'. -- Macro: AC_FUNC_GETLOADAVG Check how to get the system load averages. To perform its tests properly, this macro needs the file `getloadavg.c'; therefore, be sure to set the `AC_LIBOBJ' replacement directory properly (see *note Generic Functions::, `AC_CONFIG_LIBOBJ_DIR'). If the system has the `getloadavg' function, define `HAVE_GETLOADAVG', and set `GETLOADAVG_LIBS' to any libraries necessary to get that function. Also add `GETLOADAVG_LIBS' to `LIBS'. Otherwise, require an `AC_LIBOBJ' replacement for `getloadavg' with source code in `DIR/getloadavg.c', and possibly define several other C preprocessor macros and output variables: 1. Define `C_GETLOADAVG'. 2. Define `SVR4', `DGUX', `UMAX', or `UMAX4_3' if on those systems. 3. If `nlist.h' is found, define `HAVE_NLIST_H'. 4. If `struct nlist' has an `n_un.n_name' member, define `HAVE_STRUCT_NLIST_N_UN_N_NAME'. The obsolete symbol `NLIST_NAME_UNION' is still defined, but do not depend upon it. 5. Programs may need to be installed set-group-ID (or set-user-ID) for `getloadavg' to work. In this case, define `GETLOADAVG_PRIVILEGED', set the output variable `NEED_SETGID' to `true' (and otherwise to `false'), and set `KMEM_GROUP' to the name of the group that should own the installed program. The `AC_FUNC_GETLOADAVG' macro is obsolescent. New programs should use Gnulib's `getloadavg' module. *Note Gnulib::. -- Macro: AC_FUNC_GETMNTENT Check for `getmntent' in the standard C library, and then in the `sun', `seq', and `gen' libraries, for UNICOS, IRIX 4, PTX, and UnixWare, respectively. Then, if `getmntent' is available, define `HAVE_GETMNTENT' and set `ac_cv_func_getmntent' to `yes'. Otherwise set `ac_cv_func_getmntent' to `no'. The result of this macro can be overridden by setting the cache variable `ac_cv_search_getmntent'. -- Macro: AC_FUNC_GETPGRP Define `GETPGRP_VOID' if it is an error to pass 0 to `getpgrp'; this is the Posix behavior. On older BSD systems, you must pass 0 to `getpgrp', as it takes an argument and behaves like Posix's `getpgid'. #ifdef GETPGRP_VOID pid = getpgrp (); #else pid = getpgrp (0); #endif This macro does not check whether `getpgrp' exists at all; if you need to work in that situation, first call `AC_CHECK_FUNC' for `getpgrp'. The result of this macro is cached in the `ac_cv_func_getpgrp_void' variable. This macro is obsolescent, as current systems have a `getpgrp' whose signature conforms to Posix. New programs need not use this macro. -- Macro: AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK If `link' is a symbolic link, then `lstat' should treat `link/' the same as `link/.'. However, many older `lstat' implementations incorrectly ignore trailing slashes. It is safe to assume that if `lstat' incorrectly ignores trailing slashes, then other symbolic-link-aware functions like `unlink' also incorrectly ignore trailing slashes. If `lstat' behaves properly, define `LSTAT_FOLLOWS_SLASHED_SYMLINK', otherwise require an `AC_LIBOBJ' replacement of `lstat'. The result of this macro is cached in the `ac_cv_func_lstat_dereferences_slashed_symlink' variable. The `AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK' macro is obsolescent. New programs should use Gnulib's `lstat' module. *Note Gnulib::. -- Macro: AC_FUNC_MALLOC If the `malloc' function is compatible with the GNU C library `malloc' (i.e., `malloc (0)' returns a valid pointer), define `HAVE_MALLOC' to 1. Otherwise define `HAVE_MALLOC' to 0, ask for an `AC_LIBOBJ' replacement for `malloc', and define `malloc' to `rpl_malloc' so that the native `malloc' is not used in the main project. Typically, the replacement file `malloc.c' should look like (note the `#undef malloc'): #include #undef malloc #include void *malloc (); /* Allocate an N-byte block of memory from the heap. If N is zero, allocate a 1-byte block. */ void * rpl_malloc (size_t n) { if (n == 0) n = 1; return malloc (n); } The result of this macro is cached in the `ac_cv_func_malloc_0_nonnull' variable. -- Macro: AC_FUNC_MBRTOWC Define `HAVE_MBRTOWC' to 1 if the function `mbrtowc' and the type `mbstate_t' are properly declared. The result of this macro is cached in the `ac_cv_func_mbrtowc' variable. -- Macro: AC_FUNC_MEMCMP If the `memcmp' function is not available, or does not work on 8-bit data (like the one on SunOS 4.1.3), or fails when comparing 16 bytes or more and with at least one buffer not starting on a 4-byte boundary (such as the one on NeXT x86 OpenStep), require an `AC_LIBOBJ' replacement for `memcmp'. The result of this macro is cached in the `ac_cv_func_memcmp_working' variable. This macro is obsolescent, as current systems have a working `memcmp'. New programs need not use this macro. -- Macro: AC_FUNC_MKTIME If the `mktime' function is not available, or does not work correctly, require an `AC_LIBOBJ' replacement for `mktime'. For the purposes of this test, `mktime' should conform to the Posix standard and should be the inverse of `localtime'. The result of this macro is cached in the `ac_cv_func_working_mktime' variable. The `AC_FUNC_MKTIME' macro is obsolescent. New programs should use Gnulib's `mktime' module. *Note Gnulib::. -- Macro: AC_FUNC_MMAP If the `mmap' function exists and works correctly, define `HAVE_MMAP'. This checks only private fixed mapping of already-mapped memory. The result of this macro is cached in the `ac_cv_func_mmap_fixed_mapped' variable. -- Macro: AC_FUNC_OBSTACK If the obstacks are found, define `HAVE_OBSTACK', else require an `AC_LIBOBJ' replacement for `obstack'. The result of this macro is cached in the `ac_cv_func_obstack' variable. -- Macro: AC_FUNC_REALLOC If the `realloc' function is compatible with the GNU C library `realloc' (i.e., `realloc (NULL, 0)' returns a valid pointer), define `HAVE_REALLOC' to 1. Otherwise define `HAVE_REALLOC' to 0, ask for an `AC_LIBOBJ' replacement for `realloc', and define `realloc' to `rpl_realloc' so that the native `realloc' is not used in the main project. See `AC_FUNC_MALLOC' for details. The result of this macro is cached in the `ac_cv_func_realloc_0_nonnull' variable. -- Macro: AC_FUNC_SELECT_ARGTYPES Determines the correct type to be passed for each of the `select' function's arguments, and defines those types in `SELECT_TYPE_ARG1', `SELECT_TYPE_ARG234', and `SELECT_TYPE_ARG5' respectively. `SELECT_TYPE_ARG1' defaults to `int', `SELECT_TYPE_ARG234' defaults to `int *', and `SELECT_TYPE_ARG5' defaults to `struct timeval *'. This macro is obsolescent, as current systems have a `select' whose signature conforms to Posix. New programs need not use this macro. -- Macro: AC_FUNC_SETPGRP If `setpgrp' takes no argument (the Posix version), define `SETPGRP_VOID'. Otherwise, it is the BSD version, which takes two process IDs as arguments. This macro does not check whether `setpgrp' exists at all; if you need to work in that situation, first call `AC_CHECK_FUNC' for `setpgrp'. The result of this macro is cached in the `ac_cv_func_setpgrp_void' variable. This macro is obsolescent, as current systems have a `setpgrp' whose signature conforms to Posix. New programs need not use this macro. -- Macro: AC_FUNC_STAT -- Macro: AC_FUNC_LSTAT Determine whether `stat' or `lstat' have the bug that it succeeds when given the zero-length file name as argument. The `stat' and `lstat' from SunOS 4.1.4 and the Hurd (as of 1998-11-01) do this. If it does, then define `HAVE_STAT_EMPTY_STRING_BUG' (or `HAVE_LSTAT_EMPTY_STRING_BUG') and ask for an `AC_LIBOBJ' replacement of it. The results of these macros are cached in the `ac_cv_func_stat_empty_string_bug' and the `ac_cv_func_lstat_empty_string_bug' variables, respectively. These macros are obsolescent, as no current systems have the bug. New programs need not use these macros. -- Macro: AC_FUNC_STRCOLL If the `strcoll' function exists and works correctly, define `HAVE_STRCOLL'. This does a bit more than `AC_CHECK_FUNCS(strcoll)', because some systems have incorrect definitions of `strcoll' that should not be used. The result of this macro is cached in the `ac_cv_func_strcoll_works' variable. -- Macro: AC_FUNC_STRERROR_R If `strerror_r' is available, define `HAVE_STRERROR_R', and if it is declared, define `HAVE_DECL_STRERROR_R'. If it returns a `char *' message, define `STRERROR_R_CHAR_P'; otherwise it returns an `int' error number. The Thread-Safe Functions option of Posix requires `strerror_r' to return `int', but many systems (including, for example, version 2.2.4 of the GNU C Library) return a `char *' value that is not necessarily equal to the buffer argument. The result of this macro is cached in the `ac_cv_func_strerror_r_char_p' variable. -- Macro: AC_FUNC_STRFTIME Check for `strftime' in the `intl' library, for SCO Unix. Then, if `strftime' is available, define `HAVE_STRFTIME'. This macro is obsolescent, as no current systems require the `intl' library for `strftime'. New programs need not use this macro. -- Macro: AC_FUNC_STRTOD If the `strtod' function does not exist or doesn't work correctly, ask for an `AC_LIBOBJ' replacement of `strtod'. In this case, because `strtod.c' is likely to need `pow', set the output variable `POW_LIB' to the extra library needed. This macro caches its result in the `ac_cv_func_strtod' variable and depends upon the result in the `ac_cv_func_pow' variable. The `AC_FUNC_STRTOD' macro is obsolescent. New programs should use Gnulib's `strtod' module. *Note Gnulib::. -- Macro: AC_FUNC_STRTOLD If the `strtold' function exists and conforms to C99, define `HAVE_STRTOLD'. This macro caches its result in the `ac_cv_func_strtold' variable. -- Macro: AC_FUNC_STRNLEN If the `strnlen' function is not available, or is buggy (like the one from AIX 4.3), require an `AC_LIBOBJ' replacement for it. This macro caches its result in the `ac_cv_func_strnlen_working' variable. -- Macro: AC_FUNC_UTIME_NULL If `utime (FILE, NULL)' sets FILE's timestamp to the present, define `HAVE_UTIME_NULL'. This macro caches its result in the `ac_cv_func_utime_null' variable. This macro is obsolescent, as all current systems have a `utime' that behaves this way. New programs need not use this macro. -- Macro: AC_FUNC_VPRINTF If `vprintf' is found, define `HAVE_VPRINTF'. Otherwise, if `_doprnt' is found, define `HAVE_DOPRNT'. (If `vprintf' is available, you may assume that `vfprintf' and `vsprintf' are also available.) This macro is obsolescent, as all current systems have `vprintf'. New programs need not use this macro. -- Macro: AC_REPLACE_FNMATCH If the `fnmatch' function does not conform to Posix (see `AC_FUNC_FNMATCH'), ask for its `AC_LIBOBJ' replacement. The files `fnmatch.c', `fnmatch_loop.c', and `fnmatch_.h' in the `AC_LIBOBJ' replacement directory are assumed to contain a copy of the source code of GNU `fnmatch'. If necessary, this source code is compiled as an `AC_LIBOBJ' replacement, and the `fnmatch_.h' file is linked to `fnmatch.h' so that it can be included in place of the system `'. This macro caches its result in the `ac_cv_func_fnmatch_works' variable. This macro is obsolescent, as it assumes the use of particular source files. New programs should use Gnulib's `fnmatch-posix' module, which provides this macro along with the source files. *Note Gnulib::.  File: autoconf.info, Node: Generic Functions, Prev: Particular Functions, Up: Library Functions 5.5.3 Generic Function Checks ----------------------------- These macros are used to find functions not covered by the "particular" test macros. If the functions might be in libraries other than the default C library, first call `AC_CHECK_LIB' for those libraries. If you need to check the behavior of a function as well as find out whether it is present, you have to write your own test for it (*note Writing Tests::). -- Macro: AC_CHECK_FUNC (FUNCTION, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) If C function FUNCTION is available, run shell commands ACTION-IF-FOUND, otherwise ACTION-IF-NOT-FOUND. If you just want to define a symbol if the function is available, consider using `AC_CHECK_FUNCS' instead. This macro checks for functions with C linkage even when `AC_LANG(C++)' has been called, since C is more standardized than C++. (*note Language Choice::, for more information about selecting the language for checks.) This macro caches its result in the `ac_cv_func_FUNCTION' variable. -- Macro: AC_CHECK_FUNCS (FUNCTION..., [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) For each FUNCTION enumerated in the blank-or-newline-separated argument list, define `HAVE_FUNCTION' (in all capitals) if it is available. If ACTION-IF-FOUND is given, it is additional shell code to execute when one of the functions is found. You can give it a value of `break' to break out of the loop on the first match. If ACTION-IF-NOT-FOUND is given, it is executed when one of the functions is not found. Results are cached for each FUNCTION as in `AC_CHECK_FUNC'. -- Macro: AC_CHECK_FUNCS_ONCE (FUNCTION...) For each FUNCTION enumerated in the blank-or-newline-separated argument list, define `HAVE_FUNCTION' (in all capitals) if it is available. This is a once-only variant of `AC_CHECK_FUNCS'. It generates the checking code at most once, so that `configure' is smaller and faster; but the checks cannot be conditionalized and are always done once, early during the `configure' run. Autoconf follows a philosophy that was formed over the years by those who have struggled for portability: isolate the portability issues in specific files, and then program as if you were in a Posix environment. Some functions may be missing or unfixable, and your package must be ready to replace them. Suitable replacements for many such problem functions are available from Gnulib (*note Gnulib::). -- Macro: AC_LIBOBJ (FUNCTION) Specify that `FUNCTION.c' must be included in the executables to replace a missing or broken implementation of FUNCTION. Technically, it adds `FUNCTION.$ac_objext' to the output variable `LIBOBJS' if it is not already in, and calls `AC_LIBSOURCE' for `FUNCTION.c'. You should not directly change `LIBOBJS', since this is not traceable. -- Macro: AC_LIBSOURCE (FILE) Specify that FILE might be needed to compile the project. If you need to know what files might be needed by a `configure.ac', you should trace `AC_LIBSOURCE'. FILE must be a literal. This macro is called automatically from `AC_LIBOBJ', but you must call it explicitly if you pass a shell variable to `AC_LIBOBJ'. In that case, since shell variables cannot be traced statically, you must pass to `AC_LIBSOURCE' any possible files that the shell variable might cause `AC_LIBOBJ' to need. For example, if you want to pass a variable `$foo_or_bar' to `AC_LIBOBJ' that holds either `"foo"' or `"bar"', you should do: AC_LIBSOURCE([foo.c]) AC_LIBSOURCE([bar.c]) AC_LIBOBJ([$foo_or_bar]) There is usually a way to avoid this, however, and you are encouraged to simply call `AC_LIBOBJ' with literal arguments. Note that this macro replaces the obsolete `AC_LIBOBJ_DECL', with slightly different semantics: the old macro took the function name, e.g., `foo', as its argument rather than the file name. -- Macro: AC_LIBSOURCES (FILES) Like `AC_LIBSOURCE', but accepts one or more FILES in a comma-separated M4 list. Thus, the above example might be rewritten: AC_LIBSOURCES([foo.c, bar.c]) AC_LIBOBJ([$foo_or_bar]) -- Macro: AC_CONFIG_LIBOBJ_DIR (DIRECTORY) Specify that `AC_LIBOBJ' replacement files are to be found in DIRECTORY, a name relative to the top level of the source tree. The replacement directory defaults to `.', the top level directory, and the most typical value is `lib', corresponding to `AC_CONFIG_LIBOBJ_DIR([lib])'. `configure' might need to know the replacement directory for the following reasons: (i) some checks use the replacement files, (ii) some macros bypass broken system headers by installing links to the replacement headers (iii) when used in conjunction with Automake, within each makefile, DIRECTORY is used as a relative path from `$(top_srcdir)' to each object named in `LIBOBJS' and `LTLIBOBJS', etc. It is common to merely check for the existence of a function, and ask for its `AC_LIBOBJ' replacement if missing. The following macro is a convenient shorthand. -- Macro: AC_REPLACE_FUNCS (FUNCTION...) Like `AC_CHECK_FUNCS', but uses `AC_LIBOBJ(FUNCTION)' as ACTION-IF-NOT-FOUND. You can declare your replacement function by enclosing the prototype in `#ifndef HAVE_FUNCTION'. If the system has the function, it probably declares it in a header file you should be including, so you shouldn't redeclare it lest your declaration conflict.  File: autoconf.info, Node: Header Files, Next: Declarations, Prev: Library Functions, Up: Existing Tests 5.6 Header Files ================ The following macros check for the presence of certain C header files. If there is no macro specifically defined to check for a header file you need, and you don't need to check for any special properties of it, then you can use one of the general header-file check macros. * Menu: * Header Portability:: Collected knowledge on common headers * Particular Headers:: Special handling to find certain headers * Generic Headers:: How to find other headers  File: autoconf.info, Node: Header Portability, Next: Particular Headers, Up: Header Files 5.6.1 Portability of Headers ---------------------------- This section documents some collected knowledge about common headers, and the problems they cause. By definition, this list always requires additions. A much more complete list is maintained by the Gnulib project (*note Gnulib::), covering *note Posix Headers: (gnulib)Header File Substitutes. and *note Glibc Headers: (gnulib)Glibc Header File Substitutes. Please help us keep the gnulib list as complete as possible. `limits.h' C99 says that `limits.h' defines `LLONG_MIN', `LLONG_MAX', and `ULLONG_MAX', but many almost-C99 environments (e.g., default GCC 4.0.2 + glibc 2.4) do not define them. `inttypes.h' vs. `stdint.h' The C99 standard says that `inttypes.h' includes `stdint.h', so there's no need to include `stdint.h' separately in a standard environment. Some implementations have `inttypes.h' but not `stdint.h' (e.g., Solaris 7), but we don't know of any implementation that has `stdint.h' but not `inttypes.h'. `linux/irda.h' It requires `linux/types.h' and `sys/socket.h'. `linux/random.h' It requires `linux/types.h'. `net/if.h' On Darwin, this file requires that `sys/socket.h' be included beforehand. One should run: AC_CHECK_HEADERS([sys/socket.h]) AC_CHECK_HEADERS([net/if.h], [], [], [#include #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_SYS_SOCKET_H # include #endif ]) `netinet/if_ether.h' On Darwin, this file requires that `stdio.h' and `sys/socket.h' be included beforehand. One should run: AC_CHECK_HEADERS([sys/socket.h]) AC_CHECK_HEADERS([netinet/if_ether.h], [], [], [#include #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_SYS_SOCKET_H # include #endif ]) `stdint.h' See above, item `inttypes.h' vs. `stdint.h'. `stdlib.h' On many systems (e.g., Darwin), `stdio.h' is a prerequisite. `sys/mount.h' On FreeBSD 4.8 on ia32 and using gcc version 2.95.4, `sys/params.h' is a prerequisite. `sys/ptem.h' On Solaris 8, `sys/stream.h' is a prerequisite. `sys/socket.h' On Darwin, `stdlib.h' is a prerequisite. `sys/ucred.h' On Tru64 5.1, `sys/types.h' is a prerequisite. `X11/extensions/scrnsaver.h' Using XFree86, this header requires `X11/Xlib.h', which is probably so required that you might not even consider looking for it. AC_CHECK_HEADERS([X11/extensions/scrnsaver.h], [], [], [[#include ]])  File: autoconf.info, Node: Particular Headers, Next: Generic Headers, Prev: Header Portability, Up: Header Files 5.6.2 Particular Header Checks ------------------------------ These macros check for particular system header files--whether they exist, and in some cases whether they declare certain symbols. -- Macro: AC_CHECK_HEADER_STDBOOL Check whether `stdbool.h' exists and conforms to C99, and cache the result in the `ac_cv_header_stdbool_h' variable. If the type `_Bool' is defined, define `HAVE__BOOL' to 1. This macro is intended for use by Gnulib (*note Gnulib::) and other packages that supply a substitute `stdbool.h' on platforms lacking a conforming one. The `AC_HEADER_STDBOOL' macro is better for code that explicitly checks for `stdbool.h'. -- Macro: AC_HEADER_ASSERT Check whether to enable assertions in the style of `assert.h'. Assertions are enabled by default, but the user can override this by invoking `configure' with the `--disable-assert' option. -- Macro: AC_HEADER_DIRENT Check for the following header files. For the first one that is found and defines `DIR', define the listed C preprocessor macro: `dirent.h' `HAVE_DIRENT_H' `sys/ndir.h' `HAVE_SYS_NDIR_H' `sys/dir.h' `HAVE_SYS_DIR_H' `ndir.h' `HAVE_NDIR_H' The directory-library declarations in your source code should look something like the following: #include #ifdef HAVE_DIRENT_H # include # define NAMLEN(dirent) strlen ((dirent)->d_name) #else # define dirent direct # define NAMLEN(dirent) ((dirent)->d_namlen) # ifdef HAVE_SYS_NDIR_H # include # endif # ifdef HAVE_SYS_DIR_H # include # endif # ifdef HAVE_NDIR_H # include # endif #endif Using the above declarations, the program would declare variables to be of type `struct dirent', not `struct direct', and would access the length of a directory entry name by passing a pointer to a `struct dirent' to the `NAMLEN' macro. This macro also checks for the SCO Xenix `dir' and `x' libraries. This macro is obsolescent, as all current systems with directory libraries have `'. New programs need not use this macro. Also see `AC_STRUCT_DIRENT_D_INO' and `AC_STRUCT_DIRENT_D_TYPE' (*note Particular Structures::). -- Macro: AC_HEADER_MAJOR If `sys/types.h' does not define `major', `minor', and `makedev', but `sys/mkdev.h' does, define `MAJOR_IN_MKDEV'; otherwise, if `sys/sysmacros.h' does, define `MAJOR_IN_SYSMACROS'. -- Macro: AC_HEADER_RESOLV Checks for header `resolv.h', checking for prerequisites first. To properly use `resolv.h', your code should contain something like the following: #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_NETINET_IN_H # include /* inet_ functions / structs */ #endif #ifdef HAVE_ARPA_NAMESER_H # include /* DNS HEADER struct */ #endif #ifdef HAVE_NETDB_H # include #endif #include -- Macro: AC_HEADER_STAT If the macros `S_ISDIR', `S_ISREG', etc. defined in `sys/stat.h' do not work properly (returning false positives), define `STAT_MACROS_BROKEN'. This is the case on Tektronix UTekV, Amdahl UTS and Motorola System V/88. This macro is obsolescent, as no current systems have the bug. New programs need not use this macro. -- Macro: AC_HEADER_STDBOOL If `stdbool.h' exists and conforms to C99, define `HAVE_STDBOOL_H' to 1; if the type `_Bool' is defined, define `HAVE__BOOL' to 1. To fulfill the C99 requirements, your program could contain the following code: #ifdef HAVE_STDBOOL_H # include #else # ifndef HAVE__BOOL # ifdef __cplusplus typedef bool _Bool; # else # define _Bool signed char # endif # endif # define bool _Bool # define false 0 # define true 1 # define __bool_true_false_are_defined 1 #endif Alternatively you can use the `stdbool' package of Gnulib (*note Gnulib::). It simplifies your code so that it can say just `#include ', and it adds support for less-common platforms. This macro caches its result in the `ac_cv_header_stdbool_h' variable. This macro differs from `AC_CHECK_HEADER_STDBOOL' only in that it defines `HAVE_STDBOOL_H' whereas `AC_CHECK_HEADER_STDBOOL' does not. -- Macro: AC_HEADER_STDC Define `STDC_HEADERS' if the system has C header files conforming to ANSI C89 (ISO C90). Specifically, this macro checks for `stdlib.h', `stdarg.h', `string.h', and `float.h'; if the system has those, it probably has the rest of the C89 header files. This macro also checks whether `string.h' declares `memchr' (and thus presumably the other `mem' functions), whether `stdlib.h' declare `free' (and thus presumably `malloc' and other related functions), and whether the `ctype.h' macros work on characters with the high bit set, as the C standard requires. If you use this macro, your code can refer to `STDC_HEADERS' to determine whether the system has conforming header files (and probably C library functions). This macro caches its result in the `ac_cv_header_stdc' variable. This macro is obsolescent, as current systems have conforming header files. New programs need not use this macro. Nowadays `string.h' is part of the C standard and declares functions like `strcpy', and `strings.h' is standardized by Posix and declares BSD functions like `bcopy'; but historically, string functions were a major sticking point in this area. If you still want to worry about portability to ancient systems without standard headers, there is so much variation that it is probably easier to declare the functions you use than to figure out exactly what the system header files declare. Some ancient systems contained a mix of functions from the C standard and from BSD; some were mostly standard but lacked `memmove'; some defined the BSD functions as macros in `string.h' or `strings.h'; some had only the BSD functions but `string.h'; some declared the memory functions in `memory.h', some in `string.h'; etc. It is probably sufficient to check for one string function and one memory function; if the library had the standard versions of those then it probably had most of the others. If you put the following in `configure.ac': # This example is obsolescent. # Nowadays you can omit these macro calls. AC_HEADER_STDC AC_CHECK_FUNCS([strchr memcpy]) then, in your code, you can use declarations like this: /* This example is obsolescent. Nowadays you can just #include . */ #ifdef STDC_HEADERS # include #else # ifndef HAVE_STRCHR # define strchr index # define strrchr rindex # endif char *strchr (), *strrchr (); # ifndef HAVE_MEMCPY # define memcpy(d, s, n) bcopy ((s), (d), (n)) # define memmove(d, s, n) bcopy ((s), (d), (n)) # endif #endif If you use a function like `memchr', `memset', `strtok', or `strspn', which have no BSD equivalent, then macros don't suffice to port to ancient hosts; you must provide an implementation of each function. An easy way to incorporate your implementations only when needed (since the ones in system C libraries may be hand optimized) is to, taking `memchr' for example, put it in `memchr.c' and use `AC_REPLACE_FUNCS([memchr])'. -- Macro: AC_HEADER_SYS_WAIT If `sys/wait.h' exists and is compatible with Posix, define `HAVE_SYS_WAIT_H'. Incompatibility can occur if `sys/wait.h' does not exist, or if it uses the old BSD `union wait' instead of `int' to store a status value. If `sys/wait.h' is not Posix compatible, then instead of including it, define the Posix macros with their usual interpretations. Here is an example: #include #ifdef HAVE_SYS_WAIT_H # include #endif #ifndef WEXITSTATUS # define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8) #endif #ifndef WIFEXITED # define WIFEXITED(stat_val) (((stat_val) & 255) == 0) #endif This macro caches its result in the `ac_cv_header_sys_wait_h' variable. This macro is obsolescent, as current systems are compatible with Posix. New programs need not use this macro. `_POSIX_VERSION' is defined when `unistd.h' is included on Posix systems. If there is no `unistd.h', it is definitely not a Posix system. However, some non-Posix systems do have `unistd.h'. The way to check whether the system supports Posix is: #ifdef HAVE_UNISTD_H # include # include #endif #ifdef _POSIX_VERSION /* Code for Posix systems. */ #endif -- Macro: AC_HEADER_TIME If a program may include both `time.h' and `sys/time.h', define `TIME_WITH_SYS_TIME'. On some ancient systems, `sys/time.h' included `time.h', but `time.h' was not protected against multiple inclusion, so programs could not explicitly include both files. This macro is useful in programs that use, for example, `struct timeval' as well as `struct tm'. It is best used in conjunction with `HAVE_SYS_TIME_H', which can be checked for using `AC_CHECK_HEADERS([sys/time.h])'. #ifdef TIME_WITH_SYS_TIME # include # include #else # ifdef HAVE_SYS_TIME_H # include # else # include # endif #endif This macro caches its result in the `ac_cv_header_time' variable. This macro is obsolescent, as current systems can include both files when they exist. New programs need not use this macro. -- Macro: AC_HEADER_TIOCGWINSZ If the use of `TIOCGWINSZ' requires `', then define `GWINSZ_IN_SYS_IOCTL'. Otherwise `TIOCGWINSZ' can be found in `'. Use: #ifdef HAVE_TERMIOS_H # include #endif #ifdef GWINSZ_IN_SYS_IOCTL # include #endif  File: autoconf.info, Node: Generic Headers, Prev: Particular Headers, Up: Header Files 5.6.3 Generic Header Checks --------------------------- These macros are used to find system header files not covered by the "particular" test macros. If you need to check the contents of a header as well as find out whether it is present, you have to write your own test for it (*note Writing Tests::). -- Macro: AC_CHECK_HEADER (HEADER-FILE, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES]) If the system header file HEADER-FILE is compilable, execute shell commands ACTION-IF-FOUND, otherwise execute ACTION-IF-NOT-FOUND. If you just want to define a symbol if the header file is available, consider using `AC_CHECK_HEADERS' instead. INCLUDES is decoded to determine the appropriate include directives. If omitted or empty, `configure' will check for both header existence (with the preprocessor) and usability (with the compiler), using `AC_INCLUDES_DEFAULT' for the compile test. If there is a discrepancy between the results, a warning is issued to the user, and the compiler results are favored (*note Present But Cannot Be Compiled::). In general, favoring the compiler results means that a header will be treated as not found even though the file exists, because you did not provide enough prerequisites. Providing a non-empty INCLUDES argument allows the code to provide any prerequisites prior to including the header under test; it is common to use the argument `AC_INCLUDES_DEFAULT' (*note Default Includes::). With an explicit fourth argument, no preprocessor test is needed. As a special case, an INCLUDES of exactly `-' triggers the older preprocessor check, which merely determines existence of the file in the preprocessor search path; this should only be used as a last resort (it is safer to determine the actual prerequisites and perform a compiler check, or else use `AC_PREPROC_IFELSE' to make it obvious that only a preprocessor check is desired). This macro caches its result in the `ac_cv_header_HEADER-FILE' variable, with characters not suitable for a variable name mapped to underscores. -- Macro: AC_CHECK_HEADERS (HEADER-FILE..., [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES]) For each given system header file HEADER-FILE in the blank-separated argument list that exists, define `HAVE_HEADER-FILE' (in all capitals). If ACTION-IF-FOUND is given, it is additional shell code to execute when one of the header files is found. You can give it a value of `break' to break out of the loop on the first match. If ACTION-IF-NOT-FOUND is given, it is executed when one of the header files is not found. INCLUDES is interpreted as in `AC_CHECK_HEADER', in order to choose the set of preprocessor directives supplied before the header under test. This macro caches its result in the `ac_cv_header_HEADER-FILE' variable, with characters not suitable for a variable name mapped to underscores. Previous versions of Autoconf merely checked whether the header was accepted by the preprocessor. This was changed because the old test was inappropriate for typical uses. Headers are typically used to compile, not merely to preprocess, and the old behavior sometimes accepted headers that clashed at compile-time (*note Present But Cannot Be Compiled::). If you need to check whether a header is preprocessable, you can use `AC_PREPROC_IFELSE' (*note Running the Preprocessor::). Actually requiring a header to compile improves the robustness of the test, but it also requires that you make sure that headers that must be included before the HEADER-FILE be part of the INCLUDES, (*note Default Includes::). If looking for `bar.h', which requires that `foo.h' be included before if it exists, we suggest the following scheme: AC_CHECK_HEADERS([foo.h]) AC_CHECK_HEADERS([bar.h], [], [], [#ifdef HAVE_FOO_H # include #endif ]) The following variant generates smaller, faster `configure' files if you do not need the full power of `AC_CHECK_HEADERS'. -- Macro: AC_CHECK_HEADERS_ONCE (HEADER-FILE...) For each given system header file HEADER-FILE in the blank-separated argument list that exists, define `HAVE_HEADER-FILE' (in all capitals). This is a once-only variant of `AC_CHECK_HEADERS'. It generates the checking code at most once, so that `configure' is smaller and faster; but the checks cannot be conditionalized and are always done once, early during the `configure' run. Thus, this macro is only safe for checking headers that do not have prerequisites beyond what `AC_INCLUDES_DEFAULT' provides.  File: autoconf.info, Node: Declarations, Next: Structures, Prev: Header Files, Up: Existing Tests 5.7 Declarations ================ The following macros check for the declaration of variables and functions. If there is no macro specifically defined to check for a symbol you need, then you can use the general macros (*note Generic Declarations::) or, for more complex tests, you may use `AC_COMPILE_IFELSE' (*note Running the Compiler::). * Menu: * Particular Declarations:: Macros to check for certain declarations * Generic Declarations:: How to find other declarations  File: autoconf.info, Node: Particular Declarations, Next: Generic Declarations, Up: Declarations 5.7.1 Particular Declaration Checks ----------------------------------- There are no specific macros for declarations.  File: autoconf.info, Node: Generic Declarations, Prev: Particular Declarations, Up: Declarations 5.7.2 Generic Declaration Checks -------------------------------- These macros are used to find declarations not covered by the "particular" test macros. -- Macro: AC_CHECK_DECL (SYMBOL, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `AC_INCLUDES_DEFAULT']) If SYMBOL (a function, variable, or constant) is not declared in INCLUDES and a declaration is needed, run the shell commands ACTION-IF-NOT-FOUND, otherwise ACTION-IF-FOUND. INCLUDES is a series of include directives, defaulting to `AC_INCLUDES_DEFAULT' (*note Default Includes::), which are used prior to the declaration under test. This macro actually tests whether SYMBOL is defined as a macro or can be used as an r-value, not whether it is really declared, because it is much safer to avoid introducing extra declarations when they are not needed. In order to facilitate use of C++ and overloaded function declarations, it is possible to specify function argument types in parentheses for types which can be zero-initialized: AC_CHECK_DECL([basename(char *)]) This macro caches its result in the `ac_cv_have_decl_SYMBOL' variable, with characters not suitable for a variable name mapped to underscores. -- Macro: AC_CHECK_DECLS (SYMBOLS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `AC_INCLUDES_DEFAULT']) For each of the SYMBOLS (_comma_-separated list with optional function argument types for C++ overloads), define `HAVE_DECL_SYMBOL' (in all capitals) to `1' if SYMBOL is declared, otherwise to `0'. If ACTION-IF-NOT-FOUND is given, it is additional shell code to execute when one of the function declarations is needed, otherwise ACTION-IF-FOUND is executed. INCLUDES is a series of include directives, defaulting to `AC_INCLUDES_DEFAULT' (*note Default Includes::), which are used prior to the declarations under test. This macro uses an M4 list as first argument: AC_CHECK_DECLS([strdup]) AC_CHECK_DECLS([strlen]) AC_CHECK_DECLS([malloc, realloc, calloc, free]) AC_CHECK_DECLS([j0], [], [], [[#include ]]) AC_CHECK_DECLS([[basename(char *)], [dirname(char *)]]) Unlike the other `AC_CHECK_*S' macros, when a SYMBOL is not declared, `HAVE_DECL_SYMBOL' is defined to `0' instead of leaving `HAVE_DECL_SYMBOL' undeclared. When you are _sure_ that the check was performed, use `HAVE_DECL_SYMBOL' in `#if': #if !HAVE_DECL_SYMBOL extern char *symbol; #endif If the test may have not been performed, however, because it is safer _not_ to declare a symbol than to use a declaration that conflicts with the system's one, you should use: #if defined HAVE_DECL_MALLOC && !HAVE_DECL_MALLOC void *malloc (size_t *s); #endif You fall into the second category only in extreme situations: either your files may be used without being configured, or they are used during the configuration. In most cases the traditional approach is enough. This macro caches its results in `ac_cv_have_decl_SYMBOL' variables, with characters not suitable for a variable name mapped to underscores. -- Macro: AC_CHECK_DECLS_ONCE (SYMBOLS) For each of the SYMBOLS (_comma_-separated list), define `HAVE_DECL_SYMBOL' (in all capitals) to `1' if SYMBOL is declared in the default include files, otherwise to `0'. This is a once-only variant of `AC_CHECK_DECLS'. It generates the checking code at most once, so that `configure' is smaller and faster; but the checks cannot be conditionalized and are always done once, early during the `configure' run.  File: autoconf.info, Node: Structures, Next: Types, Prev: Declarations, Up: Existing Tests 5.8 Structures ============== The following macros check for the presence of certain members in C structures. If there is no macro specifically defined to check for a member you need, then you can use the general structure-member macros (*note Generic Structures::) or, for more complex tests, you may use `AC_COMPILE_IFELSE' (*note Running the Compiler::). * Menu: * Particular Structures:: Macros to check for certain structure members * Generic Structures:: How to find other structure members  File: autoconf.info, Node: Particular Structures, Next: Generic Structures, Up: Structures 5.8.1 Particular Structure Checks --------------------------------- The following macros check for certain structures or structure members. -- Macro: AC_STRUCT_DIRENT_D_INO Perform all the actions of `AC_HEADER_DIRENT' (*note Particular Headers::). Then, if `struct dirent' contains a `d_ino' member, define `HAVE_STRUCT_DIRENT_D_INO'. `HAVE_STRUCT_DIRENT_D_INO' indicates only the presence of `d_ino', not whether its contents are always reliable. Traditionally, a zero `d_ino' indicated a deleted directory entry, though current systems hide this detail from the user and never return zero `d_ino' values. Many current systems report an incorrect `d_ino' for a directory entry that is a mount point. -- Macro: AC_STRUCT_DIRENT_D_TYPE Perform all the actions of `AC_HEADER_DIRENT' (*note Particular Headers::). Then, if `struct dirent' contains a `d_type' member, define `HAVE_STRUCT_DIRENT_D_TYPE'. -- Macro: AC_STRUCT_ST_BLOCKS If `struct stat' contains an `st_blocks' member, define `HAVE_STRUCT_STAT_ST_BLOCKS'. Otherwise, require an `AC_LIBOBJ' replacement of `fileblocks'. The former name, `HAVE_ST_BLOCKS' is to be avoided, as its support will cease in the future. This macro caches its result in the `ac_cv_member_struct_stat_st_blocks' variable. -- Macro: AC_STRUCT_TM If `time.h' does not define `struct tm', define `TM_IN_SYS_TIME', which means that including `sys/time.h' had better define `struct tm'. This macro is obsolescent, as `time.h' defines `struct tm' in current systems. New programs need not use this macro. -- Macro: AC_STRUCT_TIMEZONE Figure out how to get the current timezone. If `struct tm' has a `tm_zone' member, define `HAVE_STRUCT_TM_TM_ZONE' (and the obsoleted `HAVE_TM_ZONE'). Otherwise, if the external array `tzname' is found, define `HAVE_TZNAME'; if it is declared, define `HAVE_DECL_TZNAME'.  File: autoconf.info, Node: Generic Structures, Prev: Particular Structures, Up: Structures 5.8.2 Generic Structure Checks ------------------------------ These macros are used to find structure members not covered by the "particular" test macros. -- Macro: AC_CHECK_MEMBER (AGGREGATE.MEMBER, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `AC_INCLUDES_DEFAULT']) Check whether MEMBER is a member of the aggregate AGGREGATE. If no INCLUDES are specified, the default includes are used (*note Default Includes::). AC_CHECK_MEMBER([struct passwd.pw_gecos], [], [AC_MSG_ERROR([we need `passwd.pw_gecos'])], [[#include ]]) You can use this macro for submembers: AC_CHECK_MEMBER(struct top.middle.bot) This macro caches its result in the `ac_cv_member_AGGREGATE_MEMBER' variable, with characters not suitable for a variable name mapped to underscores. -- Macro: AC_CHECK_MEMBERS (MEMBERS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `AC_INCLUDES_DEFAULT']) Check for the existence of each `AGGREGATE.MEMBER' of MEMBERS using the previous macro. When MEMBER belongs to AGGREGATE, define `HAVE_AGGREGATE_MEMBER' (in all capitals, with spaces and dots replaced by underscores). If ACTION-IF-FOUND is given, it is executed for each of the found members. If ACTION-IF-NOT-FOUND is given, it is executed for each of the members that could not be found. INCLUDES is a series of include directives, defaulting to `AC_INCLUDES_DEFAULT' (*note Default Includes::), which are used prior to the members under test. This macro uses M4 lists: AC_CHECK_MEMBERS([struct stat.st_rdev, struct stat.st_blksize])  File: autoconf.info, Node: Types, Next: Compilers and Preprocessors, Prev: Structures, Up: Existing Tests 5.9 Types ========= The following macros check for C types, either builtin or typedefs. If there is no macro specifically defined to check for a type you need, and you don't need to check for any special properties of it, then you can use a general type-check macro. * Menu: * Particular Types:: Special handling to find certain types * Generic Types:: How to find other types  File: autoconf.info, Node: Particular Types, Next: Generic Types, Up: Types 5.9.1 Particular Type Checks ---------------------------- These macros check for particular C types in `sys/types.h', `stdlib.h', `stdint.h', `inttypes.h' and others, if they exist. The Gnulib `stdint' module is an alternate way to define many of these symbols; it is useful if you prefer your code to assume a C99-or-better environment. *Note Gnulib::. -- Macro: AC_TYPE_GETGROUPS Define `GETGROUPS_T' to be whichever of `gid_t' or `int' is the base type of the array argument to `getgroups'. This macro caches the base type in the `ac_cv_type_getgroups' variable. -- Macro: AC_TYPE_INT8_T If `stdint.h' or `inttypes.h' does not define the type `int8_t', define `int8_t' to a signed integer type that is exactly 8 bits wide and that uses two's complement representation, if such a type exists. If you are worried about porting to hosts that lack such a type, you can use the results of this macro in C89-or-later code as follows: #if HAVE_STDINT_H # include #endif #if defined INT8_MAX || defined int8_t _code using int8_t_ #else _complicated alternative using >8-bit 'signed char'_ #endif This macro caches the type in the `ac_cv_c_int8_t' variable. -- Macro: AC_TYPE_INT16_T This is like `AC_TYPE_INT8_T', except for 16-bit integers. -- Macro: AC_TYPE_INT32_T This is like `AC_TYPE_INT8_T', except for 32-bit integers. -- Macro: AC_TYPE_INT64_T This is like `AC_TYPE_INT8_T', except for 64-bit integers. -- Macro: AC_TYPE_INTMAX_T If `stdint.h' or `inttypes.h' defines the type `intmax_t', define `HAVE_INTMAX_T'. Otherwise, define `intmax_t' to the widest signed integer type. -- Macro: AC_TYPE_INTPTR_T If `stdint.h' or `inttypes.h' defines the type `intptr_t', define `HAVE_INTPTR_T'. Otherwise, define `intptr_t' to a signed integer type wide enough to hold a pointer, if such a type exists. -- Macro: AC_TYPE_LONG_DOUBLE If the C compiler supports a working `long double' type, define `HAVE_LONG_DOUBLE'. The `long double' type might have the same range and precision as `double'. This macro caches its result in the `ac_cv_type_long_double' variable. This macro is obsolescent, as current C compilers support `long double'. New programs need not use this macro. -- Macro: AC_TYPE_LONG_DOUBLE_WIDER If the C compiler supports a working `long double' type with more range or precision than the `double' type, define `HAVE_LONG_DOUBLE_WIDER'. This macro caches its result in the `ac_cv_type_long_double_wider' variable. -- Macro: AC_TYPE_LONG_LONG_INT If the C compiler supports a working `long long int' type, define `HAVE_LONG_LONG_INT'. However, this test does not test `long long int' values in preprocessor `#if' expressions, because too many compilers mishandle such expressions. *Note Preprocessor Arithmetic::. This macro caches its result in the `ac_cv_type_long_long_int' variable. -- Macro: AC_TYPE_MBSTATE_T Define `HAVE_MBSTATE_T' if `' declares the `mbstate_t' type. Also, define `mbstate_t' to be a type if `' does not declare it. This macro caches its result in the `ac_cv_type_mbstate_t' variable. -- Macro: AC_TYPE_MODE_T Define `mode_t' to a suitable type, if standard headers do not define it. This macro caches its result in the `ac_cv_type_mode_t' variable. -- Macro: AC_TYPE_OFF_T Define `off_t' to a suitable type, if standard headers do not define it. This macro caches its result in the `ac_cv_type_off_t' variable. -- Macro: AC_TYPE_PID_T Define `pid_t' to a suitable type, if standard headers do not define it. This macro caches its result in the `ac_cv_type_pid_t' variable. -- Macro: AC_TYPE_SIZE_T Define `size_t' to a suitable type, if standard headers do not define it. This macro caches its result in the `ac_cv_type_size_t' variable. -- Macro: AC_TYPE_SSIZE_T Define `ssize_t' to a suitable type, if standard headers do not define it. This macro caches its result in the `ac_cv_type_ssize_t' variable. -- Macro: AC_TYPE_UID_T Define `uid_t' and `gid_t' to suitable types, if standard headers do not define them. This macro caches its result in the `ac_cv_type_uid_t' variable. -- Macro: AC_TYPE_UINT8_T If `stdint.h' or `inttypes.h' does not define the type `uint8_t', define `uint8_t' to an unsigned integer type that is exactly 8 bits wide, if such a type exists. This is like `AC_TYPE_INT8_T', except for unsigned integers. -- Macro: AC_TYPE_UINT16_T This is like `AC_TYPE_UINT8_T', except for 16-bit integers. -- Macro: AC_TYPE_UINT32_T This is like `AC_TYPE_UINT8_T', except for 32-bit integers. -- Macro: AC_TYPE_UINT64_T This is like `AC_TYPE_UINT8_T', except for 64-bit integers. -- Macro: AC_TYPE_UINTMAX_T If `stdint.h' or `inttypes.h' defines the type `uintmax_t', define `HAVE_UINTMAX_T'. Otherwise, define `uintmax_t' to the widest unsigned integer type. -- Macro: AC_TYPE_UINTPTR_T If `stdint.h' or `inttypes.h' defines the type `uintptr_t', define `HAVE_UINTPTR_T'. Otherwise, define `uintptr_t' to an unsigned integer type wide enough to hold a pointer, if such a type exists. -- Macro: AC_TYPE_UNSIGNED_LONG_LONG_INT If the C compiler supports a working `unsigned long long int' type, define `HAVE_UNSIGNED_LONG_LONG_INT'. However, this test does not test `unsigned long long int' values in preprocessor `#if' expressions, because too many compilers mishandle such expressions. *Note Preprocessor Arithmetic::. This macro caches its result in the `ac_cv_type_unsigned_long_long_int' variable.  File: autoconf.info, Node: Generic Types, Prev: Particular Types, Up: Types 5.9.2 Generic Type Checks ------------------------- These macros are used to check for types not covered by the "particular" test macros. -- Macro: AC_CHECK_TYPE (TYPE, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `AC_INCLUDES_DEFAULT']) Check whether TYPE is defined. It may be a compiler builtin type or defined by the INCLUDES. INCLUDES is a series of include directives, defaulting to `AC_INCLUDES_DEFAULT' (*note Default Includes::), which are used prior to the type under test. In C, TYPE must be a type-name, so that the expression `sizeof (TYPE)' is valid (but `sizeof ((TYPE))' is not). The same test is applied when compiling for C++, which means that in C++ TYPE should be a type-id and should not be an anonymous `struct' or `union'. This macro caches its result in the `ac_cv_type_TYPE' variable, with `*' mapped to `p' and other characters not suitable for a variable name mapped to underscores. -- Macro: AC_CHECK_TYPES (TYPES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `AC_INCLUDES_DEFAULT']) For each TYPE of the TYPES that is defined, define `HAVE_TYPE' (in all capitals). Each TYPE must follow the rules of `AC_CHECK_TYPE'. If no INCLUDES are specified, the default includes are used (*note Default Includes::). If ACTION-IF-FOUND is given, it is additional shell code to execute when one of the types is found. If ACTION-IF-NOT-FOUND is given, it is executed when one of the types is not found. This macro uses M4 lists: AC_CHECK_TYPES([ptrdiff_t]) AC_CHECK_TYPES([unsigned long long int, uintmax_t]) AC_CHECK_TYPES([float_t], [], [], [[#include ]]) Autoconf, up to 2.13, used to provide to another version of `AC_CHECK_TYPE', broken by design. In order to keep backward compatibility, a simple heuristic, quite safe but not totally, is implemented. In case of doubt, read the documentation of the former `AC_CHECK_TYPE', see *note Obsolete Macros::.  File: autoconf.info, Node: Compilers and Preprocessors, Next: System Services, Prev: Types, Up: Existing Tests 5.10 Compilers and Preprocessors ================================ All the tests for compilers (`AC_PROG_CC', `AC_PROG_CXX', `AC_PROG_F77') define the output variable `EXEEXT' based on the output of the compiler, typically to the empty string if Posix and `.exe' if a DOS variant. They also define the output variable `OBJEXT' based on the output of the compiler, after `.c' files have been excluded, typically to `o' if Posix, `obj' if a DOS variant. If the compiler being used does not produce executables, the tests fail. If the executables can't be run, and cross-compilation is not enabled, they fail too. *Note Manual Configuration::, for more on support for cross compiling. * Menu: * Specific Compiler Characteristics:: Some portability issues * Generic Compiler Characteristics:: Language independent tests and features * C Compiler:: Checking its characteristics * C++ Compiler:: Likewise * Objective C Compiler:: Likewise * Objective C++ Compiler:: Likewise * Erlang Compiler and Interpreter:: Likewise * Fortran Compiler:: Likewise * Go Compiler:: Likewise  File: autoconf.info, Node: Specific Compiler Characteristics, Next: Generic Compiler Characteristics, Up: Compilers and Preprocessors 5.10.1 Specific Compiler Characteristics ---------------------------------------- Some compilers exhibit different behaviors. Static/Dynamic Expressions Autoconf relies on a trick to extract one bit of information from the C compiler: using negative array sizes. For instance the following excerpt of a C source demonstrates how to test whether `int' objects are 4 bytes wide: static int test_array[sizeof (int) == 4 ? 1 : -1]; To our knowledge, there is a single compiler that does not support this trick: the HP C compilers (the real ones, not only the "bundled") on HP-UX 11.00. They incorrectly reject the above program with the diagnostic "Variable-length arrays cannot have static storage." This bug comes from HP compilers' mishandling of `sizeof (int)', not from the `? 1 : -1', and Autoconf works around this problem by casting `sizeof (int)' to `long int' before comparing it.  File: autoconf.info, Node: Generic Compiler Characteristics, Next: C Compiler, Prev: Specific Compiler Characteristics, Up: Compilers and Preprocessors 5.10.2 Generic Compiler Characteristics --------------------------------------- -- Macro: AC_CHECK_SIZEOF (TYPE-OR-EXPR, [UNUSED], [INCLUDES = `AC_INCLUDES_DEFAULT']) Define `SIZEOF_TYPE-OR-EXPR' (*note Standard Symbols::) to be the size in bytes of TYPE-OR-EXPR, which may be either a type or an expression returning a value that has a size. If the expression `sizeof (TYPE-OR-EXPR)' is invalid, the result is 0. INCLUDES is a series of include directives, defaulting to `AC_INCLUDES_DEFAULT' (*note Default Includes::), which are used prior to the expression under test. This macro now works even when cross-compiling. The UNUSED argument was used when cross-compiling. For example, the call AC_CHECK_SIZEOF([int *]) defines `SIZEOF_INT_P' to be 8 on DEC Alpha AXP systems. This macro caches its result in the `ac_cv_sizeof_TYPE-OR-EXPR' variable, with `*' mapped to `p' and other characters not suitable for a variable name mapped to underscores. -- Macro: AC_CHECK_ALIGNOF (TYPE, [INCLUDES = `AC_INCLUDES_DEFAULT']) Define `ALIGNOF_TYPE' (*note Standard Symbols::) to be the alignment in bytes of TYPE. `TYPE y;' must be valid as a structure member declaration. If `type' is unknown, the result is 0. If no INCLUDES are specified, the default includes are used (*note Default Includes::). This macro caches its result in the `ac_cv_alignof_TYPE-OR-EXPR' variable, with `*' mapped to `p' and other characters not suitable for a variable name mapped to underscores. -- Macro: AC_COMPUTE_INT (VAR, EXPRESSION, [INCLUDES = `AC_INCLUDES_DEFAULT'], [ACTION-IF-FAILS]) Store into the shell variable VAR the value of the integer EXPRESSION. The value should fit in an initializer in a C variable of type `signed long'. To support cross compilation (in which case, the macro only works on hosts that use twos-complement arithmetic), it should be possible to evaluate the expression at compile-time. If no INCLUDES are specified, the default includes are used (*note Default Includes::). Execute ACTION-IF-FAILS if the value cannot be determined correctly. -- Macro: AC_LANG_WERROR Normally Autoconf ignores warnings generated by the compiler, linker, and preprocessor. If this macro is used, warnings count as fatal errors for the current language. This macro is useful when the results of configuration are used where warnings are unacceptable; for instance, if parts of a program are built with the GCC `-Werror' option. If the whole program is built using `-Werror' it is often simpler to put `-Werror' in the compiler flags (`CFLAGS', etc.). -- Macro: AC_OPENMP OpenMP (http://www.openmp.org/) specifies extensions of C, C++, and Fortran that simplify optimization of shared memory parallelism, which is a common problem on multicore CPUs. If the current language is C, the macro `AC_OPENMP' sets the variable `OPENMP_CFLAGS' to the C compiler flags needed for supporting OpenMP. `OPENMP_CFLAGS' is set to empty if the compiler already supports OpenMP, if it has no way to activate OpenMP support, or if the user rejects OpenMP support by invoking `configure' with the `--disable-openmp' option. `OPENMP_CFLAGS' needs to be used when compiling programs, when preprocessing program source, and when linking programs. Therefore you need to add `$(OPENMP_CFLAGS)' to the `CFLAGS' of C programs that use OpenMP. If you preprocess OpenMP-specific C code, you also need to add `$(OPENMP_CFLAGS)' to `CPPFLAGS'. The presence of OpenMP support is revealed at compile time by the preprocessor macro `_OPENMP'. Linking a program with `OPENMP_CFLAGS' typically adds one more shared library to the program's dependencies, so its use is recommended only on programs that actually require OpenMP. If the current language is C++, `AC_OPENMP' sets the variable `OPENMP_CXXFLAGS', suitably for the C++ compiler. The same remarks hold as for C. If the current language is Fortran 77 or Fortran, `AC_OPENMP' sets the variable `OPENMP_FFLAGS' or `OPENMP_FCFLAGS', respectively. Similar remarks as for C hold, except that `CPPFLAGS' is not used for Fortran, and no preprocessor macro signals OpenMP support. For portability, it is best to avoid spaces between `#' and `pragma omp'. That is, write `#pragma omp', not `# pragma omp'. The Sun WorkShop 6.2 C compiler chokes on the latter. This macro caches its result in the `ac_cv_prog_c_openmp', `ac_cv_prog_cxx_openmp', `ac_cv_prog_f77_openmp', or `ac_cv_prog_fc_openmp' variable, depending on the current language.  File: autoconf.info, Node: C Compiler, Next: C++ Compiler, Prev: Generic Compiler Characteristics, Up: Compilers and Preprocessors 5.10.3 C Compiler Characteristics --------------------------------- The following macros provide ways to find and exercise a C Compiler. There are a few constructs that ought to be avoided, but do not deserve being checked for, since they can easily be worked around. Don't use lines containing solitary backslashes They tickle a bug in the HP-UX C compiler (checked on HP-UX 10.20, 11.00, and 11i). When given the following source: #ifdef __STDC__ /\ * A comment with backslash-newlines in it. %{ %} *\ \ / char str[] = "\\ " A string with backslash-newlines in it %{ %} \\ ""; char apostrophe = '\\ \ '\ '; #endif the compiler incorrectly fails with the diagnostics "Non-terminating comment at end of file" and "Missing `#endif' at end of file." Removing the lines with solitary backslashes solves the problem. Don't compile several files at once if output matters to you Some compilers, such as HP's, report names of files being compiled when given more than one file operand. For instance: $ cc a.c b.c a.c: b.c: This can cause problems if you observe the output of the compiler to detect failures. Invoking `cc -c a.c && cc -c b.c && cc -o c a.o b.o' solves the issue. Don't rely on `#error' failing The IRIX C compiler does not fail when #error is preprocessed; it simply emits a diagnostic and continues, exiting successfully. So, instead of an error directive like `#error "Unsupported word size"' it is more portable to use an invalid directive like `#Unsupported word size' in Autoconf tests. In ordinary source code, `#error' is OK, since installers with inadequate compilers like IRIX can simply examine these compilers' diagnostic output. Don't rely on correct `#line' support On Solaris, `c89' (at least Sun C 5.3 through 5.8) diagnoses `#line' directives whose line numbers are greater than 32767. Nothing in Posix makes this invalid. That is why Autoconf stopped issuing `#line' directives. -- Macro: AC_PROG_CC ([COMPILER-SEARCH-LIST]) Determine a C compiler to use. If `CC' is not already set in the environment, check for `gcc' and `cc', then for other C compilers. Set output variable `CC' to the name of the compiler found. This macro may, however, be invoked with an optional first argument which, if specified, must be a blank-separated list of C compilers to search for. This just gives the user an opportunity to specify an alternative search list for the C compiler. For example, if you didn't like the default order, then you could invoke `AC_PROG_CC' like this: AC_PROG_CC([gcc cl cc]) If the C compiler does not handle function prototypes correctly by default, try to add an option to output variable `CC' to make it so. This macro tries various options that select standard-conformance modes on various systems. After calling this macro you can check whether the C compiler has been set to accept ANSI C89 (ISO C90); if not, the shell variable `ac_cv_prog_cc_c89' is set to `no'. See also `AC_C_PROTOTYPES' below. If using the GNU C compiler, set shell variable `GCC' to `yes'. If output variable `CFLAGS' was not already set, set it to `-g -O2' for the GNU C compiler (`-O2' on systems where GCC does not accept `-g'), or `-g' for other compilers. If your package does not like this default, then it is acceptable to insert the line `: ${CFLAGS=""}' after `AC_INIT' and before `AC_PROG_CC' to select an empty default instead. Many Autoconf macros use a compiler, and thus call `AC_REQUIRE([AC_PROG_CC])' to ensure that the compiler has been determined before the body of the outermost `AC_DEFUN' macro. Although `AC_PROG_CC' is safe to directly expand multiple times, it performs certain checks (such as the proper value of `EXEEXT') only on the first invocation. Therefore, care must be used when invoking this macro from within another macro rather than at the top level (*note Expanded Before Required::). -- Macro: AC_PROG_CC_C_O If the C compiler does not accept the `-c' and `-o' options simultaneously, define `NO_MINUS_C_MINUS_O'. This macro actually tests both the compiler found by `AC_PROG_CC', and, if different, the first `cc' in the path. The test fails if one fails. This macro was created for GNU Make to choose the default C compilation rule. For the compiler COMPILER, this macro caches its result in the `ac_cv_prog_cc_COMPILER_c_o' variable. -- Macro: AC_PROG_CPP Set output variable `CPP' to a command that runs the C preprocessor. If `$CC -E' doesn't work, `/lib/cpp' is used. It is only portable to run `CPP' on files with a `.c' extension. Some preprocessors don't indicate missing include files by the error status. For such preprocessors an internal variable is set that causes other macros to check the standard error from the preprocessor and consider the test failed if any warnings have been reported. For most preprocessors, though, warnings do not cause include-file tests to fail unless `AC_PROG_CPP_WERROR' is also specified. -- Macro: AC_PROG_CPP_WERROR This acts like `AC_PROG_CPP', except it treats warnings from the preprocessor as errors even if the preprocessor exit status indicates success. This is useful for avoiding headers that generate mandatory warnings, such as deprecation notices. The following macros check for C compiler or machine architecture features. To check for characteristics not listed here, use `AC_COMPILE_IFELSE' (*note Running the Compiler::) or `AC_RUN_IFELSE' (*note Runtime::). -- Macro: AC_PROG_CC_STDC If the C compiler cannot compile ISO Standard C (currently C99), try to add an option to output variable `CC' to make it work. If the compiler does not support C99, fall back to supporting ANSI C89 (ISO C90). After calling this macro you can check whether the C compiler has been set to accept Standard C; if not, the shell variable `ac_cv_prog_cc_stdc' is set to `no'. -- Macro: AC_PROG_CC_C89 If the C compiler is not in ANSI C89 (ISO C90) mode by default, try to add an option to output variable `CC' to make it so. This macro tries various options that select ANSI C89 on some system or another, preferring extended functionality modes over strict conformance modes. It considers the compiler to be in ANSI C89 mode if it handles function prototypes correctly. After calling this macro you can check whether the C compiler has been set to accept ANSI C89; if not, the shell variable `ac_cv_prog_cc_c89' is set to `no'. This macro is called automatically by `AC_PROG_CC'. -- Macro: AC_PROG_CC_C99 If the C compiler is not in C99 mode by default, try to add an option to output variable `CC' to make it so. This macro tries various options that select C99 on some system or another, preferring extended functionality modes over strict conformance modes. It considers the compiler to be in C99 mode if it handles `_Bool', `//' comments, flexible array members, `inline', signed and unsigned `long long int', mixed code and declarations, named initialization of structs, `restrict', `va_copy', varargs macros, variable declarations in `for' loops, and variable length arrays. After calling this macro you can check whether the C compiler has been set to accept C99; if not, the shell variable `ac_cv_prog_cc_c99' is set to `no'. -- Macro: AC_C_BACKSLASH_A Define `HAVE_C_BACKSLASH_A' to 1 if the C compiler understands `\a'. This macro is obsolescent, as current C compilers understand `\a'. New programs need not use this macro. -- Macro: AC_C_BIGENDIAN ([ACTION-IF-TRUE], [ACTION-IF-FALSE], [ACTION-IF-UNKNOWN], [ACTION-IF-UNIVERSAL]) If words are stored with the most significant byte first (like Motorola and SPARC CPUs), execute ACTION-IF-TRUE. If words are stored with the least significant byte first (like Intel and VAX CPUs), execute ACTION-IF-FALSE. This macro runs a test-case if endianness cannot be determined from the system header files. When cross-compiling, the test-case is not run but grep'ed for some magic values. ACTION-IF-UNKNOWN is executed if the latter case fails to determine the byte sex of the host system. In some cases a single run of a compiler can generate code for multiple architectures. This can happen, for example, when generating Mac OS X universal binary files, which work on both PowerPC and Intel architectures. In this case, the different variants might be for different architectures whose endiannesses differ. If `configure' detects this, it executes ACTION-IF-UNIVERSAL instead of ACTION-IF-UNKNOWN. The default for ACTION-IF-TRUE is to define `WORDS_BIGENDIAN'. The default for ACTION-IF-FALSE is to do nothing. The default for ACTION-IF-UNKNOWN is to abort configure and tell the installer how to bypass this test. And finally, the default for ACTION-IF-UNIVERSAL is to ensure that `WORDS_BIGENDIAN' is defined if and only if a universal build is detected and the current code is big-endian; this default works only if `autoheader' is used (*note autoheader Invocation::). If you use this macro without specifying ACTION-IF-UNIVERSAL, you should also use `AC_CONFIG_HEADERS'; otherwise `WORDS_BIGENDIAN' may be set incorrectly for Mac OS X universal binary files. -- Macro: AC_C_CONST If the C compiler does not fully support the `const' keyword, define `const' to be empty. Some C compilers that do not define `__STDC__' do support `const'; some compilers that define `__STDC__' do not completely support `const'. Programs can simply use `const' as if every C compiler supported it; for those that don't, the makefile or configuration header file defines it as empty. Occasionally installers use a C++ compiler to compile C code, typically because they lack a C compiler. This causes problems with `const', because C and C++ treat `const' differently. For example: const int foo; is valid in C but not in C++. These differences unfortunately cannot be papered over by defining `const' to be empty. If `autoconf' detects this situation, it leaves `const' alone, as this generally yields better results in practice. However, using a C++ compiler to compile C code is not recommended or supported, and installers who run into trouble in this area should get a C compiler like GCC to compile their C code. This macro caches its result in the `ac_cv_c_const' variable. This macro is obsolescent, as current C compilers support `const'. New programs need not use this macro. -- Macro: AC_C_RESTRICT If the C compiler recognizes a variant spelling for the `restrict' keyword (`__restrict', `__restrict__', or `_Restrict'), then define `restrict' to that; this is more likely to do the right thing with compilers that support language variants where plain `restrict' is not a keyword. Otherwise, if the C compiler recognizes the `restrict' keyword, don't do anything. Otherwise, define `restrict' to be empty. Thus, programs may simply use `restrict' as if every C compiler supported it; for those that do not, the makefile or configuration header defines it away. Although support in C++ for the `restrict' keyword is not required, several C++ compilers do accept the keyword. This macro works for them, too. This macro caches `no' in the `ac_cv_c_restrict' variable if `restrict' is not supported, and a supported spelling otherwise. -- Macro: AC_C_VOLATILE If the C compiler does not understand the keyword `volatile', define `volatile' to be empty. Programs can simply use `volatile' as if every C compiler supported it; for those that do not, the makefile or configuration header defines it as empty. If the correctness of your program depends on the semantics of `volatile', simply defining it to be empty does, in a sense, break your code. However, given that the compiler does not support `volatile', you are at its mercy anyway. At least your program compiles, when it wouldn't before. *Note Volatile Objects::, for more about `volatile'. In general, the `volatile' keyword is a standard C feature, so you might expect that `volatile' is available only when `__STDC__' is defined. However, Ultrix 4.3's native compiler does support volatile, but does not define `__STDC__'. This macro is obsolescent, as current C compilers support `volatile'. New programs need not use this macro. -- Macro: AC_C_INLINE If the C compiler supports the keyword `inline', do nothing. Otherwise define `inline' to `__inline__' or `__inline' if it accepts one of those, otherwise define `inline' to be empty. -- Macro: AC_C_CHAR_UNSIGNED If the C type `char' is unsigned, define `__CHAR_UNSIGNED__', unless the C compiler predefines it. These days, using this macro is not necessary. The same information can be determined by this portable alternative, thus avoiding the use of preprocessor macros in the namespace reserved for the implementation. #include #if CHAR_MIN == 0 # define CHAR_UNSIGNED 1 #endif -- Macro: AC_C_STRINGIZE If the C preprocessor supports the stringizing operator, define `HAVE_STRINGIZE'. The stringizing operator is `#' and is found in macros such as this: #define x(y) #y This macro is obsolescent, as current C compilers support the stringizing operator. New programs need not use this macro. -- Macro: AC_C_FLEXIBLE_ARRAY_MEMBER If the C compiler supports flexible array members, define `FLEXIBLE_ARRAY_MEMBER' to nothing; otherwise define it to 1. That way, a declaration like this: struct s { size_t n_vals; double val[FLEXIBLE_ARRAY_MEMBER]; }; will let applications use the "struct hack" even with compilers that do not support flexible array members. To allocate and use such an object, you can use code like this: size_t i; size_t n = compute_value_count (); struct s *p = malloc (offsetof (struct s, val) + n * sizeof (double)); p->n_vals = n; for (i = 0; i < n; i++) p->val[i] = compute_value (i); -- Macro: AC_C_VARARRAYS If the C compiler supports variable-length arrays, define `HAVE_C_VARARRAYS'. A variable-length array is an array of automatic storage duration whose length is determined at run time, when the array is declared. -- Macro: AC_C_TYPEOF If the C compiler supports GCC's `typeof' syntax either directly or through a different spelling of the keyword (e.g., `__typeof__'), define `HAVE_TYPEOF'. If the support is available only through a different spelling, define `typeof' to that spelling. -- Macro: AC_C_PROTOTYPES If function prototypes are understood by the compiler (as determined by `AC_PROG_CC'), define `PROTOTYPES' and `__PROTOTYPES'. Defining `__PROTOTYPES' is for the benefit of header files that cannot use macros that infringe on user name space. This macro is obsolescent, as current C compilers support prototypes. New programs need not use this macro. -- Macro: AC_PROG_GCC_TRADITIONAL Add `-traditional' to output variable `CC' if using the GNU C compiler and `ioctl' does not work properly without `-traditional'. That usually happens when the fixed header files have not been installed on an old system. This macro is obsolescent, since current versions of the GNU C compiler fix the header files automatically when installed.  File: autoconf.info, Node: C++ Compiler, Next: Objective C Compiler, Prev: C Compiler, Up: Compilers and Preprocessors 5.10.4 C++ Compiler Characteristics ----------------------------------- -- Macro: AC_PROG_CXX ([COMPILER-SEARCH-LIST]) Determine a C++ compiler to use. Check whether the environment variable `CXX' or `CCC' (in that order) is set; if so, then set output variable `CXX' to its value. Otherwise, if the macro is invoked without an argument, then search for a C++ compiler under the likely names (first `g++' and `c++' then other names). If none of those checks succeed, then as a last resort set `CXX' to `g++'. This macro may, however, be invoked with an optional first argument which, if specified, must be a blank-separated list of C++ compilers to search for. This just gives the user an opportunity to specify an alternative search list for the C++ compiler. For example, if you didn't like the default order, then you could invoke `AC_PROG_CXX' like this: AC_PROG_CXX([gcc cl KCC CC cxx cc++ xlC aCC c++ g++]) If using the GNU C++ compiler, set shell variable `GXX' to `yes'. If output variable `CXXFLAGS' was not already set, set it to `-g -O2' for the GNU C++ compiler (`-O2' on systems where G++ does not accept `-g'), or `-g' for other compilers. If your package does not like this default, then it is acceptable to insert the line `: ${CXXFLAGS=""}' after `AC_INIT' and before `AC_PROG_CXX' to select an empty default instead. -- Macro: AC_PROG_CXXCPP Set output variable `CXXCPP' to a command that runs the C++ preprocessor. If `$CXX -E' doesn't work, `/lib/cpp' is used. It is portable to run `CXXCPP' only on files with a `.c', `.C', `.cc', or `.cpp' extension. Some preprocessors don't indicate missing include files by the error status. For such preprocessors an internal variable is set that causes other macros to check the standard error from the preprocessor and consider the test failed if any warnings have been reported. However, it is not known whether such broken preprocessors exist for C++. -- Macro: AC_PROG_CXX_C_O Test whether the C++ compiler accepts the options `-c' and `-o' simultaneously, and define `CXX_NO_MINUS_C_MINUS_O', if it does not.  File: autoconf.info, Node: Objective C Compiler, Next: Objective C++ Compiler, Prev: C++ Compiler, Up: Compilers and Preprocessors 5.10.5 Objective C Compiler Characteristics ------------------------------------------- -- Macro: AC_PROG_OBJC ([COMPILER-SEARCH-LIST]) Determine an Objective C compiler to use. If `OBJC' is not already set in the environment, check for Objective C compilers. Set output variable `OBJC' to the name of the compiler found. This macro may, however, be invoked with an optional first argument which, if specified, must be a blank-separated list of Objective C compilers to search for. This just gives the user an opportunity to specify an alternative search list for the Objective C compiler. For example, if you didn't like the default order, then you could invoke `AC_PROG_OBJC' like this: AC_PROG_OBJC([gcc objcc objc]) If using the GNU Objective C compiler, set shell variable `GOBJC' to `yes'. If output variable `OBJCFLAGS' was not already set, set it to `-g -O2' for the GNU Objective C compiler (`-O2' on systems where `gcc' does not accept `-g'), or `-g' for other compilers. -- Macro: AC_PROG_OBJCPP Set output variable `OBJCPP' to a command that runs the Objective C preprocessor. If `$OBJC -E' doesn't work, `/lib/cpp' is used.  File: autoconf.info, Node: Objective C++ Compiler, Next: Erlang Compiler and Interpreter, Prev: Objective C Compiler, Up: Compilers and Preprocessors 5.10.6 Objective C++ Compiler Characteristics --------------------------------------------- -- Macro: AC_PROG_OBJCXX ([COMPILER-SEARCH-LIST]) Determine an Objective C++ compiler to use. If `OBJCXX' is not already set in the environment, check for Objective C++ compilers. Set output variable `OBJCXX' to the name of the compiler found. This macro may, however, be invoked with an optional first argument which, if specified, must be a blank-separated list of Objective C++ compilers to search for. This just gives the user an opportunity to specify an alternative search list for the Objective C++ compiler. For example, if you didn't like the default order, then you could invoke `AC_PROG_OBJCXX' like this: AC_PROG_OBJCXX([gcc g++ objcc++ objcxx]) If using the GNU Objective C++ compiler, set shell variable `GOBJCXX' to `yes'. If output variable `OBJCXXFLAGS' was not already set, set it to `-g -O2' for the GNU Objective C++ compiler (`-O2' on systems where `gcc' does not accept `-g'), or `-g' for other compilers. -- Macro: AC_PROG_OBJCXXCPP Set output variable `OBJCXXCPP' to a command that runs the Objective C++ preprocessor. If `$OBJCXX -E' doesn't work, `/lib/cpp' is used.  File: autoconf.info, Node: Erlang Compiler and Interpreter, Next: Fortran Compiler, Prev: Objective C++ Compiler, Up: Compilers and Preprocessors 5.10.7 Erlang Compiler and Interpreter Characteristics ------------------------------------------------------ Autoconf defines the following macros for determining paths to the essential Erlang/OTP programs: -- Macro: AC_ERLANG_PATH_ERLC ([VALUE-IF-NOT-FOUND], [PATH = `$PATH']) Determine an Erlang compiler to use. If `ERLC' is not already set in the environment, check for `erlc'. Set output variable `ERLC' to the complete path of the compiler command found. In addition, if `ERLCFLAGS' is not set in the environment, set it to an empty value. The two optional arguments have the same meaning as the two last arguments of macro `AC_PATH_PROG' for looking for the `erlc' program. For example, to look for `erlc' only in the `/usr/lib/erlang/bin' directory: AC_ERLANG_PATH_ERLC([not found], [/usr/lib/erlang/bin]) -- Macro: AC_ERLANG_NEED_ERLC ([PATH = `$PATH']) A simplified variant of the `AC_ERLANG_PATH_ERLC' macro, that prints an error message and exits the `configure' script if the `erlc' program is not found. -- Macro: AC_ERLANG_PATH_ERL ([VALUE-IF-NOT-FOUND], [PATH = `$PATH']) Determine an Erlang interpreter to use. If `ERL' is not already set in the environment, check for `erl'. Set output variable `ERL' to the complete path of the interpreter command found. The two optional arguments have the same meaning as the two last arguments of macro `AC_PATH_PROG' for looking for the `erl' program. For example, to look for `erl' only in the `/usr/lib/erlang/bin' directory: AC_ERLANG_PATH_ERL([not found], [/usr/lib/erlang/bin]) -- Macro: AC_ERLANG_NEED_ERL ([PATH = `$PATH']) A simplified variant of the `AC_ERLANG_PATH_ERL' macro, that prints an error message and exits the `configure' script if the `erl' program is not found.  File: autoconf.info, Node: Fortran Compiler, Next: Go Compiler, Prev: Erlang Compiler and Interpreter, Up: Compilers and Preprocessors 5.10.8 Fortran Compiler Characteristics --------------------------------------- The Autoconf Fortran support is divided into two categories: legacy Fortran 77 macros (`F77'), and modern Fortran macros (`FC'). The former are intended for traditional Fortran 77 code, and have output variables like `F77', `FFLAGS', and `FLIBS'. The latter are for newer programs that can (or must) compile under the newer Fortran standards, and have output variables like `FC', `FCFLAGS', and `FCLIBS'. Except for the macros `AC_FC_SRCEXT', `AC_FC_FREEFORM', `AC_FC_FIXEDFORM', and `AC_FC_LINE_LENGTH' (see below), the `FC' and `F77' macros behave almost identically, and so they are documented together in this section. -- Macro: AC_PROG_F77 ([COMPILER-SEARCH-LIST]) Determine a Fortran 77 compiler to use. If `F77' is not already set in the environment, then check for `g77' and `f77', and then some other names. Set the output variable `F77' to the name of the compiler found. This macro may, however, be invoked with an optional first argument which, if specified, must be a blank-separated list of Fortran 77 compilers to search for. This just gives the user an opportunity to specify an alternative search list for the Fortran 77 compiler. For example, if you didn't like the default order, then you could invoke `AC_PROG_F77' like this: AC_PROG_F77([fl32 f77 fort77 xlf g77 f90 xlf90]) If using `g77' (the GNU Fortran 77 compiler), then set the shell variable `G77' to `yes'. If the output variable `FFLAGS' was not already set in the environment, then set it to `-g -02' for `g77' (or `-O2' where `g77' does not accept `-g'). Otherwise, set `FFLAGS' to `-g' for all other Fortran 77 compilers. The result of the GNU test is cached in the `ac_cv_f77_compiler_gnu' variable, acceptance of `-g' in the `ac_cv_prog_f77_g' variable. -- Macro: AC_PROG_FC ([COMPILER-SEARCH-LIST], [DIALECT]) Determine a Fortran compiler to use. If `FC' is not already set in the environment, then `dialect' is a hint to indicate what Fortran dialect to search for; the default is to search for the newest available dialect. Set the output variable `FC' to the name of the compiler found. By default, newer dialects are preferred over older dialects, but if `dialect' is specified then older dialects are preferred starting with the specified dialect. `dialect' can currently be one of Fortran 77, Fortran 90, or Fortran 95. However, this is only a hint of which compiler _name_ to prefer (e.g., `f90' or `f95'), and no attempt is made to guarantee that a particular language standard is actually supported. Thus, it is preferable that you avoid the `dialect' option, and use AC_PROG_FC only for code compatible with the latest Fortran standard. This macro may, alternatively, be invoked with an optional first argument which, if specified, must be a blank-separated list of Fortran compilers to search for, just as in `AC_PROG_F77'. If using `gfortran' or `g77' (the GNU Fortran compilers), then set the shell variable `GFC' to `yes'. If the output variable `FCFLAGS' was not already set in the environment, then set it to `-g -02' for GNU `g77' (or `-O2' where `g77' does not accept `-g'). Otherwise, set `FCFLAGS' to `-g' for all other Fortran compilers. The result of the GNU test is cached in the `ac_cv_fc_compiler_gnu' variable, acceptance of `-g' in the `ac_cv_prog_fc_g' variable. -- Macro: AC_PROG_F77_C_O -- Macro: AC_PROG_FC_C_O Test whether the Fortran compiler accepts the options `-c' and `-o' simultaneously, and define `F77_NO_MINUS_C_MINUS_O' or `FC_NO_MINUS_C_MINUS_O', respectively, if it does not. The result of the test is cached in the `ac_cv_prog_f77_c_o' or `ac_cv_prog_fc_c_o' variable, respectively. The following macros check for Fortran compiler characteristics. To check for characteristics not listed here, use `AC_COMPILE_IFELSE' (*note Running the Compiler::) or `AC_RUN_IFELSE' (*note Runtime::), making sure to first set the current language to Fortran 77 or Fortran via `AC_LANG([Fortran 77])' or `AC_LANG(Fortran)' (*note Language Choice::). -- Macro: AC_F77_LIBRARY_LDFLAGS -- Macro: AC_FC_LIBRARY_LDFLAGS Determine the linker flags (e.g., `-L' and `-l') for the "Fortran intrinsic and runtime libraries" that are required to successfully link a Fortran program or shared library. The output variable `FLIBS' or `FCLIBS' is set to these flags (which should be included after `LIBS' when linking). This macro is intended to be used in those situations when it is necessary to mix, e.g., C++ and Fortran source code in a single program or shared library (*note Mixing Fortran 77 With C and C++: (automake)Mixing Fortran 77 With C and C++.). For example, if object files from a C++ and Fortran compiler must be linked together, then the C++ compiler/linker must be used for linking (since special C++-ish things need to happen at link time like calling global constructors, instantiating templates, enabling exception support, etc.). However, the Fortran intrinsic and runtime libraries must be linked in as well, but the C++ compiler/linker doesn't know by default how to add these Fortran 77 libraries. Hence, this macro was created to determine these Fortran libraries. The macros `AC_F77_DUMMY_MAIN' and `AC_FC_DUMMY_MAIN' or `AC_F77_MAIN' and `AC_FC_MAIN' are probably also necessary to link C/C++ with Fortran; see below. Further, it is highly recommended that you use `AC_CONFIG_HEADERS' (*note Configuration Headers::) because the complex defines that the function wrapper macros create may not work with C/C++ compiler drivers. These macros internally compute the flag needed to verbose linking output and cache it in `ac_cv_prog_f77_v' or `ac_cv_prog_fc_v' variables, respectively. The computed linker flags are cached in `ac_cv_f77_libs' or `ac_cv_fc_libs', respectively. -- Macro: AC_F77_DUMMY_MAIN ([ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND = `AC_MSG_FAILURE']) -- Macro: AC_FC_DUMMY_MAIN ([ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND = `AC_MSG_FAILURE']) With many compilers, the Fortran libraries detected by `AC_F77_LIBRARY_LDFLAGS' or `AC_FC_LIBRARY_LDFLAGS' provide their own `main' entry function that initializes things like Fortran I/O, and which then calls a user-provided entry function named (say) `MAIN__' to run the user's program. The `AC_F77_DUMMY_MAIN' and `AC_FC_DUMMY_MAIN' or `AC_F77_MAIN' and `AC_FC_MAIN' macros figure out how to deal with this interaction. When using Fortran for purely numerical functions (no I/O, etc.) often one prefers to provide one's own `main' and skip the Fortran library initializations. In this case, however, one may still need to provide a dummy `MAIN__' routine in order to prevent linking errors on some systems. `AC_F77_DUMMY_MAIN' or `AC_FC_DUMMY_MAIN' detects whether any such routine is _required_ for linking, and what its name is; the shell variable `F77_DUMMY_MAIN' or `FC_DUMMY_MAIN' holds this name, `unknown' when no solution was found, and `none' when no such dummy main is needed. By default, ACTION-IF-FOUND defines `F77_DUMMY_MAIN' or `FC_DUMMY_MAIN' to the name of this routine (e.g., `MAIN__') _if_ it is required. ACTION-IF-NOT-FOUND defaults to exiting with an error. In order to link with Fortran routines, the user's C/C++ program should then include the following code to define the dummy main if it is needed: #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN () { return 1; } #endif (Replace `F77' with `FC' for Fortran instead of Fortran 77.) Note that this macro is called automatically from `AC_F77_WRAPPERS' or `AC_FC_WRAPPERS'; there is generally no need to call it explicitly unless one wants to change the default actions. The result of this macro is cached in the `ac_cv_f77_dummy_main' or `ac_cv_fc_dummy_main' variable, respectively. -- Macro: AC_F77_MAIN -- Macro: AC_FC_MAIN As discussed above, many Fortran libraries allow you to provide an entry point called (say) `MAIN__' instead of the usual `main', which is then called by a `main' function in the Fortran libraries that initializes things like Fortran I/O. The `AC_F77_MAIN' and `AC_FC_MAIN' macros detect whether it is _possible_ to utilize such an alternate main function, and defines `F77_MAIN' and `FC_MAIN' to the name of the function. (If no alternate main function name is found, `F77_MAIN' and `FC_MAIN' are simply defined to `main'.) Thus, when calling Fortran routines from C that perform things like I/O, one should use this macro and declare the "main" function like so: #ifdef __cplusplus extern "C" #endif int F77_MAIN (int argc, char *argv[]); (Again, replace `F77' with `FC' for Fortran instead of Fortran 77.) The result of this macro is cached in the `ac_cv_f77_main' or `ac_cv_fc_main' variable, respectively. -- Macro: AC_F77_WRAPPERS -- Macro: AC_FC_WRAPPERS Defines C macros `F77_FUNC (name, NAME)', `FC_FUNC (name, NAME)', `F77_FUNC_(name, NAME)', and `FC_FUNC_(name, NAME)' to properly mangle the names of C/C++ identifiers, and identifiers with underscores, respectively, so that they match the name-mangling scheme used by the Fortran compiler. Fortran is case-insensitive, and in order to achieve this the Fortran compiler converts all identifiers into a canonical case and format. To call a Fortran subroutine from C or to write a C function that is callable from Fortran, the C program must explicitly use identifiers in the format expected by the Fortran compiler. In order to do this, one simply wraps all C identifiers in one of the macros provided by `AC_F77_WRAPPERS' or `AC_FC_WRAPPERS'. For example, suppose you have the following Fortran 77 subroutine: subroutine foobar (x, y) double precision x, y y = 3.14159 * x return end You would then declare its prototype in C or C++ as: #define FOOBAR_F77 F77_FUNC (foobar, FOOBAR) #ifdef __cplusplus extern "C" /* prevent C++ name mangling */ #endif void FOOBAR_F77 (double *x, double *y); Note that we pass both the lowercase and uppercase versions of the function name to `F77_FUNC' so that it can select the right one. Note also that all parameters to Fortran 77 routines are passed as pointers (*note Mixing Fortran 77 With C and C++: (automake)Mixing Fortran 77 With C and C++.). (Replace `F77' with `FC' for Fortran instead of Fortran 77.) Although Autoconf tries to be intelligent about detecting the name-mangling scheme of the Fortran compiler, there may be Fortran compilers that it doesn't support yet. In this case, the above code generates a compile-time error, but some other behavior (e.g., disabling Fortran-related features) can be induced by checking whether `F77_FUNC' or `FC_FUNC' is defined. Now, to call that routine from a C program, we would do something like: { double x = 2.7183, y; FOOBAR_F77 (&x, &y); } If the Fortran identifier contains an underscore (e.g., `foo_bar'), you should use `F77_FUNC_' or `FC_FUNC_' instead of `F77_FUNC' or `FC_FUNC' (with the same arguments). This is because some Fortran compilers mangle names differently if they contain an underscore. The name mangling scheme is encoded in the `ac_cv_f77_mangling' or `ac_cv_fc_mangling' cache variable, respectively, and also used for the `AC_F77_FUNC' and `AC_FC_FUNC' macros described below. -- Macro: AC_F77_FUNC (NAME, [SHELLVAR]) -- Macro: AC_FC_FUNC (NAME, [SHELLVAR]) Given an identifier NAME, set the shell variable SHELLVAR to hold the mangled version NAME according to the rules of the Fortran linker (see also `AC_F77_WRAPPERS' or `AC_FC_WRAPPERS'). SHELLVAR is optional; if it is not supplied, the shell variable is simply NAME. The purpose of this macro is to give the caller a way to access the name-mangling information other than through the C preprocessor as above, for example, to call Fortran routines from some language other than C/C++. -- Macro: AC_FC_SRCEXT (EXT, [ACTION-IF-SUCCESS], [ACTION-IF-FAILURE = `AC_MSG_FAILURE']) -- Macro: AC_FC_PP_SRCEXT (EXT, [ACTION-IF-SUCCESS], [ACTION-IF-FAILURE = `AC_MSG_FAILURE']) By default, the `FC' macros perform their tests using a `.f' extension for source-code files. Some compilers, however, only enable newer language features for appropriately named files, e.g., Fortran 90 features only for `.f90' files, or preprocessing only with `.F' files or maybe other upper-case extensions. On the other hand, some other compilers expect all source files to end in `.f' and require special flags to support other file name extensions. The `AC_FC_SRCEXT' and `AC_FC_PP_SRCEXT' macros deal with these issues. The `AC_FC_SRCEXT' macro tries to get the `FC' compiler to accept files ending with the extension `.EXT' (i.e., EXT does _not_ contain the dot). If any special compiler flags are needed for this, it stores them in the output variable `FCFLAGS_EXT'. This extension and these flags are then used for all subsequent `FC' tests (until `AC_FC_SRCEXT' or `AC_FC_PP_SRCEXT' is called another time). For example, you would use `AC_FC_SRCEXT(f90)' to employ the `.f90' extension in future tests, and it would set the `FCFLAGS_f90' output variable with any extra flags that are needed to compile such files. Similarly, the `AC_FC_PP_SRCEXT' macro tries to get the `FC' compiler to preprocess and compile files with the extension `.EXT'. When both `fpp' and `cpp' style preprocessing are provided, the former is preferred, as the latter may treat continuation lines, `//' tokens, and white space differently from what some Fortran dialects expect. Conversely, if you do not want files to be preprocessed, use only lower-case characters in the file name extension. Like with `AC_FC_SRCEXT(f90)', any needed flags are stored in the `FCFLAGS_EXT' variable. The `FCFLAGS_EXT' flags can _not_ be simply absorbed into `FCFLAGS', for two reasons based on the limitations of some compilers. First, only one `FCFLAGS_EXT' can be used at a time, so files with different extensions must be compiled separately. Second, `FCFLAGS_EXT' must appear _immediately_ before the source-code file name when compiling. So, continuing the example above, you might compile a `foo.f90' file in your makefile with the command: foo.o: foo.f90 $(FC) -c $(FCFLAGS) $(FCFLAGS_f90) '$(srcdir)/foo.f90' If `AC_FC_SRCEXT' or `AC_FC_PP_SRCEXT' succeeds in compiling files with the EXT extension, it calls ACTION-IF-SUCCESS (defaults to nothing). If it fails, and cannot find a way to make the `FC' compiler accept such files, it calls ACTION-IF-FAILURE (defaults to exiting with an error message). The `AC_FC_SRCEXT' and `AC_FC_PP_SRCEXT' macros cache their results in `ac_cv_fc_srcext_EXT' and `ac_cv_fc_pp_srcext_EXT' variables, respectively. -- Macro: AC_FC_PP_DEFINE ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE = `AC_MSG_FAILURE']) Find a flag to specify defines for preprocessed Fortran. Not all Fortran compilers use `-D'. Substitute `FC_DEFINE' with the result and call ACTION-IF-SUCCESS (defaults to nothing) if successful, and ACTION-IF-FAILURE (defaults to failing with an error message) if not. This macro calls `AC_FC_PP_SRCEXT([F])' in order to learn how to preprocess a `conftest.F' file, but restores a previously used Fortran source file extension afterwards again. The result of this test is cached in the `ac_cv_fc_pp_define' variable. -- Macro: AC_FC_FREEFORM ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE = `AC_MSG_FAILURE']) Try to ensure that the Fortran compiler (`$FC') allows free-format source code (as opposed to the older fixed-format style from Fortran 77). If necessary, it may add some additional flags to `FCFLAGS'. This macro is most important if you are using the default `.f' extension, since many compilers interpret this extension as indicating fixed-format source unless an additional flag is supplied. If you specify a different extension with `AC_FC_SRCEXT', such as `.f90', then `AC_FC_FREEFORM' ordinarily succeeds without modifying `FCFLAGS'. For extensions which the compiler does not know about, the flag set by the `AC_FC_SRCEXT' macro might let the compiler assume Fortran 77 by default, however. If `AC_FC_FREEFORM' succeeds in compiling free-form source, it calls ACTION-IF-SUCCESS (defaults to nothing). If it fails, it calls ACTION-IF-FAILURE (defaults to exiting with an error message). The result of this test, or `none' or `unknown', is cached in the `ac_cv_fc_freeform' variable. -- Macro: AC_FC_FIXEDFORM ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE = `AC_MSG_FAILURE']) Try to ensure that the Fortran compiler (`$FC') allows the old fixed-format source code (as opposed to free-format style). If necessary, it may add some additional flags to `FCFLAGS'. This macro is needed for some compilers alias names like `xlf95' which assume free-form source code by default, and in case you want to use fixed-form source with an extension like `.f90' which many compilers interpret as free-form by default. If you specify a different extension with `AC_FC_SRCEXT', such as `.f', then `AC_FC_FIXEDFORM' ordinarily succeeds without modifying `FCFLAGS'. If `AC_FC_FIXEDFORM' succeeds in compiling fixed-form source, it calls ACTION-IF-SUCCESS (defaults to nothing). If it fails, it calls ACTION-IF-FAILURE (defaults to exiting with an error message). The result of this test, or `none' or `unknown', is cached in the `ac_cv_fc_fixedform' variable. -- Macro: AC_FC_LINE_LENGTH ([LENGTH], [ACTION-IF-SUCCESS], [ACTION-IF-FAILURE = `AC_MSG_FAILURE']) Try to ensure that the Fortran compiler (`$FC') accepts long source code lines. The LENGTH argument may be given as 80, 132, or unlimited, and defaults to 132. Note that line lengths above 254 columns are not portable, and some compilers do not accept more than 132 columns at least for fixed format source. If necessary, it may add some additional flags to `FCFLAGS'. If `AC_FC_LINE_LENGTH' succeeds in compiling fixed-form source, it calls ACTION-IF-SUCCESS (defaults to nothing). If it fails, it calls ACTION-IF-FAILURE (defaults to exiting with an error message). The result of this test, or `none' or `unknown', is cached in the `ac_cv_fc_line_length' variable. -- Macro: AC_FC_CHECK_BOUNDS ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE = `AC_MSG_FAILURE']) The `AC_FC_CHECK_BOUNDS' macro tries to enable array bounds checking in the Fortran compiler. If successful, the ACTION-IF-SUCCESS is called and any needed flags are added to `FCFLAGS'. Otherwise, ACTION-IF-FAILURE is called, which defaults to failing with an error message. The macro currently requires Fortran 90 or a newer dialect. The result of the macro is cached in the `ac_cv_fc_check_bounds' variable. -- Macro: AC_F77_IMPLICIT_NONE ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE = `AC_MSG_FAILURE']) -- Macro: AC_FC_IMPLICIT_NONE ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE = `AC_MSG_FAILURE']) Try to disallow implicit declarations in the Fortran compiler. If successful, ACTION-IF-SUCCESS is called and any needed flags are added to `FFLAGS' or `FCFLAGS', respectively. Otherwise, ACTION-IF-FAILURE is called, which defaults to failing with an error message. The result of these macros are cached in the `ac_cv_f77_implicit_none' and `ac_cv_fc_implicit_none' variables, respectively. -- Macro: AC_FC_MODULE_EXTENSION Find the Fortran 90 module file name extension. Most Fortran 90 compilers store module information in files separate from the object files. The module files are usually named after the name of the module rather than the source file name, with characters possibly turned to upper case, plus an extension, often `.mod'. Not all compilers use module files at all, or by default. The Cray Fortran compiler requires `-e m' in order to store and search module information in `.mod' files rather than in object files. Likewise, the Fujitsu Fortran compilers uses the `-Am' option to indicate how module information is stored. The `AC_FC_MODULE_EXTENSION' macro computes the module extension without the leading dot, and stores that in the `FC_MODEXT' variable. If the compiler does not produce module files, or the extension cannot be determined, `FC_MODEXT' is empty. Typically, the result of this macro may be used in cleanup `make' rules as follows: clean-modules: -test -z "$(FC_MODEXT)" || rm -f *.$(FC_MODEXT) The extension, or `unknown', is cached in the `ac_cv_fc_module_ext' variable. -- Macro: AC_FC_MODULE_FLAG ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE = `AC_MSG_FAILURE']) Find the compiler flag to include Fortran 90 module information from another directory, and store that in the `FC_MODINC' variable. Call ACTION-IF-SUCCESS (defaults to nothing) if successful, and set `FC_MODINC' to empty and call ACTION-IF-FAILURE (defaults to exiting with an error message) if not. Most Fortran 90 compilers provide a way to specify module directories. Some have separate flags for the directory to write module files to, and directories to search them in, whereas others only allow writing to the current directory or to the first directory specified in the include path. Further, with some compilers, the module search path and the preprocessor search path can only be modified with the same flag. Thus, for portability, write module files to the current directory only and list that as first directory in the search path. There may be no whitespace between `FC_MODINC' and the following directory name, but `FC_MODINC' may contain trailing white space. For example, if you use Automake and would like to search `../lib' for module files, you can use the following: AM_FCFLAGS = $(FC_MODINC). $(FC_MODINC)../lib Inside `configure' tests, you can use: if test -n "$FC_MODINC"; then FCFLAGS="$FCFLAGS $FC_MODINC. $FC_MODINC../lib" fi The flag is cached in the `ac_cv_fc_module_flag' variable. The substituted value of `FC_MODINC' may refer to the `ac_empty' dummy placeholder empty variable, to avoid losing the significant trailing whitespace in a `Makefile'. -- Macro: AC_FC_MODULE_OUTPUT_FLAG ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE = `AC_MSG_FAILURE']) Find the compiler flag to write Fortran 90 module information to another directory, and store that in the `FC_MODOUT' variable. Call ACTION-IF-SUCCESS (defaults to nothing) if successful, and set `FC_MODOUT' to empty and call ACTION-IF-FAILURE (defaults to exiting with an error message) if not. Not all Fortran 90 compilers write module files, and of those that do, not all allow writing to a directory other than the current one, nor do all have separate flags for writing and reading; see the description of `AC_FC_MODULE_FLAG' above. If you need to be able to write to another directory, for maximum portability use `FC_MODOUT' before any `FC_MODINC' and include both the current directory and the one you write to in the search path: AM_FCFLAGS = $(FC_MODOUT)../mod $(FC_MODINC)../mod $(FC_MODINC). ... The flag is cached in the `ac_cv_fc_module_output_flag' variable. The substituted value of `FC_MODOUT' may refer to the `ac_empty' dummy placeholder empty variable, to avoid losing the significant trailing whitespace in a `Makefile'.  File: autoconf.info, Node: Go Compiler, Prev: Fortran Compiler, Up: Compilers and Preprocessors 5.10.9 Go Compiler Characteristics ---------------------------------- Autoconf provides basic support for the Go programming language when using the `gccgo' compiler (there is currently no support for the `6g' and `8g' compilers). -- Macro: AC_PROG_GO ([COMPILER-SEARCH-LIST]) Find the Go compiler to use. Check whether the environment variable `GOC' is set; if so, then set output variable `GOC' to its value. Otherwise, if the macro is invoked without an argument, then search for a Go compiler named `gccgo'. If it is not found, then as a last resort set `GOC' to `gccgo'. This macro may be invoked with an optional first argument which, if specified, must be a blank-separated list of Go compilers to search for. If output variable `GOFLAGS' was not already set, set it to `-g -O2'. If your package does not like this default, `GOFLAGS' may be set before `AC_PROG_GO'.  File: autoconf.info, Node: System Services, Next: Posix Variants, Prev: Compilers and Preprocessors, Up: Existing Tests 5.11 System Services ==================== The following macros check for operating system services or capabilities. -- Macro: AC_PATH_X Try to locate the X Window System include files and libraries. If the user gave the command line options `--x-includes=DIR' and `--x-libraries=DIR', use those directories. If either or both were not given, get the missing values by running `xmkmf' (or an executable pointed to by the `XMKMF' environment variable) on a trivial `Imakefile' and examining the makefile that it produces. Setting `XMKMF' to `false' disables this method. If this method fails to find the X Window System, `configure' looks for the files in several directories where they often reside. If either method is successful, set the shell variables `x_includes' and `x_libraries' to their locations, unless they are in directories the compiler searches by default. If both methods fail, or the user gave the command line option `--without-x', set the shell variable `no_x' to `yes'; otherwise set it to the empty string. -- Macro: AC_PATH_XTRA An enhanced version of `AC_PATH_X'. It adds the C compiler flags that X needs to output variable `X_CFLAGS', and the X linker flags to `X_LIBS'. Define `X_DISPLAY_MISSING' if X is not available. This macro also checks for special libraries that some systems need in order to compile X programs. It adds any that the system needs to output variable `X_EXTRA_LIBS'. And it checks for special X11R6 libraries that need to be linked with before `-lX11', and adds any found to the output variable `X_PRE_LIBS'. -- Macro: AC_SYS_INTERPRETER Check whether the system supports starting scripts with a line of the form `#!/bin/sh' to select the interpreter to use for the script. After running this macro, shell code in `configure.ac' can check the shell variable `interpval'; it is set to `yes' if the system supports `#!', `no' if not. -- Macro: AC_SYS_LARGEFILE Arrange for 64-bit file offsets, known as large-file support (http://www.unix-systems.org/version2/whatsnew/lfs20mar.html). On some hosts, one must use special compiler options to build programs that can access large files. Append any such options to the output variable `CC'. Define `_FILE_OFFSET_BITS' and `_LARGE_FILES' if necessary. Large-file support can be disabled by configuring with the `--disable-largefile' option. If you use this macro, check that your program works even when `off_t' is wider than `long int', since this is common when large-file support is enabled. For example, it is not correct to print an arbitrary `off_t' value `X' with `printf ("%ld", (long int) X)'. The LFS introduced the `fseeko' and `ftello' functions to replace their C counterparts `fseek' and `ftell' that do not use `off_t'. Take care to use `AC_FUNC_FSEEKO' to make their prototypes available when using them and large-file support is enabled. -- Macro: AC_SYS_LONG_FILE_NAMES If the system supports file names longer than 14 characters, define `HAVE_LONG_FILE_NAMES'. -- Macro: AC_SYS_POSIX_TERMIOS Check to see if the Posix termios headers and functions are available on the system. If so, set the shell variable `ac_cv_sys_posix_termios' to `yes'. If not, set the variable to `no'.  File: autoconf.info, Node: Posix Variants, Next: Erlang Libraries, Prev: System Services, Up: Existing Tests 5.12 Posix Variants =================== The following macro makes it possible to use features of Posix that are extensions to C, as well as platform extensions not defined by Posix. -- Macro: AC_USE_SYSTEM_EXTENSIONS This macro was introduced in Autoconf 2.60. If possible, enable extensions to C or Posix on hosts that normally disable the extensions, typically due to standards-conformance namespace issues. This should be called before any macros that run the C compiler. The following preprocessor macros are defined where appropriate: `_GNU_SOURCE' Enable extensions on GNU/Linux. `__EXTENSIONS__' Enable general extensions on Solaris. `_POSIX_PTHREAD_SEMANTICS' Enable threading extensions on Solaris. `_TANDEM_SOURCE' Enable extensions for the HP NonStop platform. `_ALL_SOURCE' Enable extensions for AIX 3, and for Interix. `_POSIX_SOURCE' Enable Posix functions for Minix. `_POSIX_1_SOURCE' Enable additional Posix functions for Minix. `_MINIX' Identify Minix platform. This particular preprocessor macro is obsolescent, and may be removed in a future release of Autoconf.  File: autoconf.info, Node: Erlang Libraries, Prev: Posix Variants, Up: Existing Tests 5.13 Erlang Libraries ===================== The following macros check for an installation of Erlang/OTP, and for the presence of certain Erlang libraries. All those macros require the configuration of an Erlang interpreter and an Erlang compiler (*note Erlang Compiler and Interpreter::). -- Macro: AC_ERLANG_SUBST_ERTS_VER Set the output variable `ERLANG_ERTS_VER' to the version of the Erlang runtime system (as returned by Erlang's `erlang:system_info(version)' function). The result of this test is cached if caching is enabled when running `configure'. The `ERLANG_ERTS_VER' variable is not intended to be used for testing for features of specific ERTS versions, but to be used for substituting the ERTS version in Erlang/OTP release resource files (`.rel' files), as shown below. -- Macro: AC_ERLANG_SUBST_ROOT_DIR Set the output variable `ERLANG_ROOT_DIR' to the path to the base directory in which Erlang/OTP is installed (as returned by Erlang's `code:root_dir/0' function). The result of this test is cached if caching is enabled when running `configure'. -- Macro: AC_ERLANG_SUBST_LIB_DIR Set the output variable `ERLANG_LIB_DIR' to the path of the library directory of Erlang/OTP (as returned by Erlang's `code:lib_dir/0' function), which subdirectories each contain an installed Erlang/OTP library. The result of this test is cached if caching is enabled when running `configure'. -- Macro: AC_ERLANG_CHECK_LIB (LIBRARY, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) Test whether the Erlang/OTP library LIBRARY is installed by calling Erlang's `code:lib_dir/1' function. The result of this test is cached if caching is enabled when running `configure'. ACTION-IF-FOUND is a list of shell commands to run if the library is installed; ACTION-IF-NOT-FOUND is a list of shell commands to run if it is not. Additionally, if the library is installed, the output variable `ERLANG_LIB_DIR_LIBRARY' is set to the path to the library installation directory, and the output variable `ERLANG_LIB_VER_LIBRARY' is set to the version number that is part of the subdirectory name, if it is in the standard form (`LIBRARY-VERSION'). If the directory name does not have a version part, `ERLANG_LIB_VER_LIBRARY' is set to the empty string. If the library is not installed, `ERLANG_LIB_DIR_LIBRARY' and `ERLANG_LIB_VER_LIBRARY' are set to `"not found"'. For example, to check if library `stdlib' is installed: AC_ERLANG_CHECK_LIB([stdlib], [echo "stdlib version \"$ERLANG_LIB_VER_stdlib\"" echo "is installed in \"$ERLANG_LIB_DIR_stdlib\""], [AC_MSG_ERROR([stdlib was not found!])]) The `ERLANG_LIB_VER_LIBRARY' variables (set by `AC_ERLANG_CHECK_LIB') and the `ERLANG_ERTS_VER' variable (set by `AC_ERLANG_SUBST_ERTS_VER') are not intended to be used for testing for features of specific versions of libraries or of the Erlang runtime system. Those variables are intended to be substituted in Erlang release resource files (`.rel' files). For instance, to generate a `example.rel' file for an application depending on the `stdlib' library, `configure.ac' could contain: AC_ERLANG_SUBST_ERTS_VER AC_ERLANG_CHECK_LIB([stdlib], [], [AC_MSG_ERROR([stdlib was not found!])]) AC_CONFIG_FILES([example.rel]) The `example.rel.in' file used to generate `example.rel' should contain: {release, {"@PACKAGE@", "@VERSION@"}, {erts, "@ERLANG_ERTS_VER@"}, [{stdlib, "@ERLANG_LIB_VER_stdlib@"}, {@PACKAGE@, "@VERSION@"}]}. In addition to the above macros, which test installed Erlang libraries, the following macros determine the paths to the directories into which newly built Erlang libraries are to be installed: -- Macro: AC_ERLANG_SUBST_INSTALL_LIB_DIR Set the `ERLANG_INSTALL_LIB_DIR' output variable to the directory into which every built Erlang library should be installed in a separate subdirectory. If this variable is not set in the environment when `configure' runs, its default value is `${libdir}/erlang/lib'. -- Macro: AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR (LIBRARY, VERSION) Set the `ERLANG_INSTALL_LIB_DIR_LIBRARY' output variable to the directory into which the built Erlang library LIBRARY version VERSION should be installed. If this variable is not set in the environment when `configure' runs, its default value is `$ERLANG_INSTALL_LIB_DIR/LIBRARY-VERSION', the value of the `ERLANG_INSTALL_LIB_DIR' variable being set by the `AC_ERLANG_SUBST_INSTALL_LIB_DIR' macro.  File: autoconf.info, Node: Writing Tests, Next: Results, Prev: Existing Tests, Up: Top 6 Writing Tests *************** If the existing feature tests don't do something you need, you have to write new ones. These macros are the building blocks. They provide ways for other macros to check whether various kinds of features are available and report the results. This chapter contains some suggestions and some of the reasons why the existing tests are written the way they are. You can also learn a lot about how to write Autoconf tests by looking at the existing ones. If something goes wrong in one or more of the Autoconf tests, this information can help you understand the assumptions behind them, which might help you figure out how to best solve the problem. These macros check the output of the compiler system of the current language (*note Language Choice::). They do not cache the results of their tests for future use (*note Caching Results::), because they don't know enough about the information they are checking for to generate a cache variable name. They also do not print any messages, for the same reason. The checks for particular kinds of features call these macros and do cache their results and print messages about what they're checking for. When you write a feature test that could be applicable to more than one software package, the best thing to do is encapsulate it in a new macro. *Note Writing Autoconf Macros::, for how to do that. * Menu: * Language Choice:: Selecting which language to use for testing * Writing Test Programs:: Forging source files for compilers * Running the Preprocessor:: Detecting preprocessor symbols * Running the Compiler:: Detecting language or header features * Running the Linker:: Detecting library features * Runtime:: Testing for runtime features * Systemology:: A zoology of operating systems * Multiple Cases:: Tests for several possible values  File: autoconf.info, Node: Language Choice, Next: Writing Test Programs, Up: Writing Tests 6.1 Language Choice =================== Autoconf-generated `configure' scripts check for the C compiler and its features by default. Packages that use other programming languages (maybe more than one, e.g., C and C++) need to test features of the compilers for the respective languages. The following macros determine which programming language is used in the subsequent tests in `configure.ac'. -- Macro: AC_LANG (LANGUAGE) Do compilation tests using the compiler, preprocessor, and file extensions for the specified LANGUAGE. Supported languages are: `C' Do compilation tests using `CC' and `CPP' and use extension `.c' for test programs. Use compilation flags: `CPPFLAGS' with `CPP', and both `CPPFLAGS' and `CFLAGS' with `CC'. `C++' Do compilation tests using `CXX' and `CXXCPP' and use extension `.C' for test programs. Use compilation flags: `CPPFLAGS' with `CXXCPP', and both `CPPFLAGS' and `CXXFLAGS' with `CXX'. `Fortran 77' Do compilation tests using `F77' and use extension `.f' for test programs. Use compilation flags: `FFLAGS'. `Fortran' Do compilation tests using `FC' and use extension `.f' (or whatever has been set by `AC_FC_SRCEXT') for test programs. Use compilation flags: `FCFLAGS'. `Erlang' Compile and execute tests using `ERLC' and `ERL' and use extension `.erl' for test Erlang modules. Use compilation flags: `ERLCFLAGS'. `Objective C' Do compilation tests using `OBJC' and `OBJCPP' and use extension `.m' for test programs. Use compilation flags: `CPPFLAGS' with `OBJCPP', and both `CPPFLAGS' and `OBJCFLAGS' with `OBJC'. `Objective C++' Do compilation tests using `OBJCXX' and `OBJCXXCPP' and use extension `.mm' for test programs. Use compilation flags: `CPPFLAGS' with `OBJCXXCPP', and both `CPPFLAGS' and `OBJCXXFLAGS' with `OBJCXX'. `Go' Do compilation tests using `GOC' and use extension `.go' for test programs. Use compilation flags `GOFLAGS'. -- Macro: AC_LANG_PUSH (LANGUAGE) Remember the current language (as set by `AC_LANG') on a stack, and then select the LANGUAGE. Use this macro and `AC_LANG_POP' in macros that need to temporarily switch to a particular language. -- Macro: AC_LANG_POP ([LANGUAGE]) Select the language that is saved on the top of the stack, as set by `AC_LANG_PUSH', and remove it from the stack. If given, LANGUAGE specifies the language we just _quit_. It is a good idea to specify it when it's known (which should be the case...), since Autoconf detects inconsistencies. AC_LANG_PUSH([Fortran 77]) # Perform some tests on Fortran 77. # ... AC_LANG_POP([Fortran 77]) -- Macro: AC_LANG_ASSERT (LANGUAGE) Check statically that the current language is LANGUAGE. You should use this in your language specific macros to avoid that they be called with an inappropriate language. This macro runs only at `autoconf' time, and incurs no cost at `configure' time. Sadly enough and because Autoconf is a two layer language (1), the macros `AC_LANG_PUSH' and `AC_LANG_POP' cannot be "optimizing", therefore as much as possible you ought to avoid using them to wrap your code, rather, require from the user to run the macro with a correct current language, and check it with `AC_LANG_ASSERT'. And anyway, that may help the user understand she is running a Fortran macro while expecting a result about her Fortran 77 compiler... -- Macro: AC_REQUIRE_CPP Ensure that whichever preprocessor would currently be used for tests has been found. Calls `AC_REQUIRE' (*note Prerequisite Macros::) with an argument of either `AC_PROG_CPP' or `AC_PROG_CXXCPP', depending on which language is current. ---------- Footnotes ---------- (1) Because M4 is not aware of Sh code, especially conditionals, some optimizations that look nice statically may produce incorrect results at runtime.  File: autoconf.info, Node: Writing Test Programs, Next: Running the Preprocessor, Prev: Language Choice, Up: Writing Tests 6.2 Writing Test Programs ========================= Autoconf tests follow a common scheme: feed some program with some input, and most of the time, feed a compiler with some source file. This section is dedicated to these source samples. * Menu: * Guidelines:: General rules for writing test programs * Test Functions:: Avoiding pitfalls in test programs * Generating Sources:: Source program boilerplate  File: autoconf.info, Node: Guidelines, Next: Test Functions, Up: Writing Test Programs 6.2.1 Guidelines for Test Programs ---------------------------------- The most important rule to follow when writing testing samples is: _Look for realism._ This motto means that testing samples must be written with the same strictness as real programs are written. In particular, you should avoid "shortcuts" and simplifications. Don't just play with the preprocessor if you want to prepare a compilation. For instance, using `cpp' to check whether a header is functional might let your `configure' accept a header which causes some _compiler_ error. Do not hesitate to check a header with other headers included before, especially required headers. Make sure the symbols you use are properly defined, i.e., refrain from simply declaring a function yourself instead of including the proper header. Test programs should not write to standard output. They should exit with status 0 if the test succeeds, and with status 1 otherwise, so that success can be distinguished easily from a core dump or other failure; segmentation violations and other failures produce a nonzero exit status. Unless you arrange for `exit' to be declared, test programs should `return', not `exit', from `main', because on many systems `exit' is not declared by default. Test programs can use `#if' or `#ifdef' to check the values of preprocessor macros defined by tests that have already run. For example, if you call `AC_HEADER_STDBOOL', then later on in `configure.ac' you can have a test program that includes `stdbool.h' conditionally: #ifdef HAVE_STDBOOL_H # include #endif Both `#if HAVE_STDBOOL_H' and `#ifdef HAVE_STDBOOL_H' will work with any standard C compiler. Some developers prefer `#if' because it is easier to read, while others prefer `#ifdef' because it avoids diagnostics with picky compilers like GCC with the `-Wundef' option. If a test program needs to use or create a data file, give it a name that starts with `conftest', such as `conftest.data'. The `configure' script cleans up by running `rm -f -r conftest*' after running test programs and if the script is interrupted.  File: autoconf.info, Node: Test Functions, Next: Generating Sources, Prev: Guidelines, Up: Writing Test Programs 6.2.2 Test Functions -------------------- These days it's safe to assume support for function prototypes (introduced in C89). Functions that test programs declare should also be conditionalized for C++, which requires `extern "C"' prototypes. Make sure to not include any header files containing clashing prototypes. #ifdef __cplusplus extern "C" #endif void *valloc (size_t); If a test program calls a function with invalid parameters (just to see whether it exists), organize the program to ensure that it never invokes that function. You can do this by calling it in another function that is never invoked. You can't do it by putting it after a call to `exit', because GCC version 2 knows that `exit' never returns and optimizes out any code that follows it in the same block. If you include any header files, be sure to call the functions relevant to them with the correct number of arguments, even if they are just 0, to avoid compilation errors due to prototypes. GCC version 2 has internal prototypes for several functions that it automatically inlines; for example, `memcpy'. To avoid errors when checking for them, either pass them the correct number of arguments or redeclare them with a different return type (such as `char').  File: autoconf.info, Node: Generating Sources, Prev: Test Functions, Up: Writing Test Programs 6.2.3 Generating Sources ------------------------ Autoconf provides a set of macros that can be used to generate test source files. They are written to be language generic, i.e., they actually depend on the current language (*note Language Choice::) to "format" the output properly. -- Macro: AC_LANG_CONFTEST (SOURCE) Save the SOURCE text in the current test source file: `conftest.EXTENSION' where the EXTENSION depends on the current language. As of Autoconf 2.63b, the source file also contains the results of all of the `AC_DEFINE' performed so far. Note that the SOURCE is evaluated exactly once, like regular Autoconf macro arguments, and therefore (i) you may pass a macro invocation, (ii) if not, be sure to double quote if needed. This macro issues a warning during `autoconf' processing if SOURCE does not include an expansion of the macro `AC_LANG_DEFINES_PROVIDED' (note that both `AC_LANG_SOURCE' and `AC_LANG_PROGRAM' call this macro, and thus avoid the warning). This macro is seldom called directly, but is used under the hood by more common macros such as `AC_COMPILE_IFELSE' and `AC_RUN_IFELSE'. -- Macro: AC_LANG_DEFINES_PROVIDED This macro is called as a witness that the file `conftest.EXTENSION' appropriate for the current language is complete, including all previously determined results from `AC_DEFINE'. This macro is seldom called directly, but exists if you have a compelling reason to write a conftest file without using `AC_LANG_SOURCE', yet still want to avoid a syntax warning from `AC_LANG_CONFTEST'. -- Macro: AC_LANG_SOURCE (SOURCE) Expands into the SOURCE, with the definition of all the `AC_DEFINE' performed so far. This macro includes an expansion of `AC_LANG_DEFINES_PROVIDED'. In many cases, you may find it more convenient to use the wrapper `AC_LANG_PROGRAM'. For instance, executing (observe the double quotation!): AC_INIT([Hello], [1.0], [bug-hello@example.org], [], [http://www.example.org/]) AC_DEFINE([HELLO_WORLD], ["Hello, World\n"], [Greetings string.]) AC_LANG([C]) AC_LANG_CONFTEST( [AC_LANG_SOURCE([[const char hw[] = "Hello, World\n";]])]) gcc -E -dD conftest.c on a system with `gcc' installed, results in: ... # 1 "conftest.c" #define PACKAGE_NAME "Hello" #define PACKAGE_TARNAME "hello" #define PACKAGE_VERSION "1.0" #define PACKAGE_STRING "Hello 1.0" #define PACKAGE_BUGREPORT "bug-hello@example.org" #define PACKAGE_URL "http://www.example.org/" #define HELLO_WORLD "Hello, World\n" const char hw[] = "Hello, World\n"; When the test language is Fortran, Erlang, or Go, the `AC_DEFINE' definitions are not automatically translated into constants in the source code by this macro. -- Macro: AC_LANG_PROGRAM (PROLOGUE, BODY) Expands into a source file which consists of the PROLOGUE, and then BODY as body of the main function (e.g., `main' in C). Since it uses `AC_LANG_SOURCE', the features of the latter are available. For instance: AC_INIT([Hello], [1.0], [bug-hello@example.org], [], [http://www.example.org/]) AC_DEFINE([HELLO_WORLD], ["Hello, World\n"], [Greetings string.]) AC_LANG_CONFTEST( [AC_LANG_PROGRAM([[const char hw[] = "Hello, World\n";]], [[fputs (hw, stdout);]])]) gcc -E -dD conftest.c on a system with `gcc' installed, results in: ... # 1 "conftest.c" #define PACKAGE_NAME "Hello" #define PACKAGE_TARNAME "hello" #define PACKAGE_VERSION "1.0" #define PACKAGE_STRING "Hello 1.0" #define PACKAGE_BUGREPORT "bug-hello@example.org" #define PACKAGE_URL "http://www.example.org/" #define HELLO_WORLD "Hello, World\n" const char hw[] = "Hello, World\n"; int main () { fputs (hw, stdout); ; return 0; } In Erlang tests, the created source file is that of an Erlang module called `conftest' (`conftest.erl'). This module defines and exports at least one `start/0' function, which is called to perform the test. The PROLOGUE is optional code that is inserted between the module header and the `start/0' function definition. BODY is the body of the `start/0' function without the final period (*note Runtime::, about constraints on this function's behavior). For instance: AC_INIT([Hello], [1.0], [bug-hello@example.org]) AC_LANG(Erlang) AC_LANG_CONFTEST( [AC_LANG_PROGRAM([[-define(HELLO_WORLD, "Hello, world!").]], [[io:format("~s~n", [?HELLO_WORLD])]])]) cat conftest.erl results in: -module(conftest). -export([start/0]). -define(HELLO_WORLD, "Hello, world!"). start() -> io:format("~s~n", [?HELLO_WORLD]) . -- Macro: AC_LANG_CALL (PROLOGUE, FUNCTION) Expands into a source file which consists of the PROLOGUE, and then a call to the FUNCTION as body of the main function (e.g., `main' in C). Since it uses `AC_LANG_PROGRAM', the feature of the latter are available. This function will probably be replaced in the future by a version which would enable specifying the arguments. The use of this macro is not encouraged, as it violates strongly the typing system. This macro cannot be used for Erlang tests. -- Macro: AC_LANG_FUNC_LINK_TRY (FUNCTION) Expands into a source file which uses the FUNCTION in the body of the main function (e.g., `main' in C). Since it uses `AC_LANG_PROGRAM', the features of the latter are available. As `AC_LANG_CALL', this macro is documented only for completeness. It is considered to be severely broken, and in the future will be removed in favor of actual function calls (with properly typed arguments). This macro cannot be used for Erlang tests.  File: autoconf.info, Node: Running the Preprocessor, Next: Running the Compiler, Prev: Writing Test Programs, Up: Writing Tests 6.3 Running the Preprocessor ============================ Sometimes one might need to run the preprocessor on some source file. _Usually it is a bad idea_, as you typically need to _compile_ your project, not merely run the preprocessor on it; therefore you certainly want to run the compiler, not the preprocessor. Resist the temptation of following the easiest path. Nevertheless, if you need to run the preprocessor, then use `AC_PREPROC_IFELSE'. The macros described in this section cannot be used for tests in Erlang, Fortran, or Go, since those languages require no preprocessor. -- Macro: AC_PREPROC_IFELSE (INPUT, [ACTION-IF-TRUE], [ACTION-IF-FALSE]) Run the preprocessor of the current language (*note Language Choice::) on the INPUT, run the shell commands ACTION-IF-TRUE on success, ACTION-IF-FALSE otherwise. The INPUT can be made by `AC_LANG_PROGRAM' and friends. This macro uses `CPPFLAGS', but not `CFLAGS', because `-g', `-O', etc. are not valid options to many C preprocessors. It is customary to report unexpected failures with `AC_MSG_FAILURE'. If needed, ACTION-IF-TRUE can further access the preprocessed output in the file `conftest.i'. For instance: AC_INIT([Hello], [1.0], [bug-hello@example.org]) AC_DEFINE([HELLO_WORLD], ["Hello, World\n"], [Greetings string.]) AC_PREPROC_IFELSE( [AC_LANG_PROGRAM([[const char hw[] = "Hello, World\n";]], [[fputs (hw, stdout);]])], [AC_MSG_RESULT([OK])], [AC_MSG_FAILURE([unexpected preprocessor failure])]) results in: checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E OK The macro `AC_TRY_CPP' (*note Obsolete Macros::) used to play the role of `AC_PREPROC_IFELSE', but double quotes its argument, making it impossible to use it to elaborate sources. You are encouraged to get rid of your old use of the macro `AC_TRY_CPP' in favor of `AC_PREPROC_IFELSE', but, in the first place, are you sure you need to run the _preprocessor_ and not the compiler? -- Macro: AC_EGREP_HEADER (PATTERN, HEADER-FILE, ACTION-IF-FOUND, [ACTION-IF-NOT-FOUND]) If the output of running the preprocessor on the system header file HEADER-FILE matches the extended regular expression PATTERN, execute shell commands ACTION-IF-FOUND, otherwise execute ACTION-IF-NOT-FOUND. -- Macro: AC_EGREP_CPP (PATTERN, PROGRAM, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) PROGRAM is the text of a C or C++ program, on which shell variable, back quote, and backslash substitutions are performed. If the output of running the preprocessor on PROGRAM matches the extended regular expression PATTERN, execute shell commands ACTION-IF-FOUND, otherwise execute ACTION-IF-NOT-FOUND.  File: autoconf.info, Node: Running the Compiler, Next: Running the Linker, Prev: Running the Preprocessor, Up: Writing Tests 6.4 Running the Compiler ======================== To check for a syntax feature of the current language's (*note Language Choice::) compiler, such as whether it recognizes a certain keyword, or simply to try some library feature, use `AC_COMPILE_IFELSE' to try to compile a small program that uses that feature. -- Macro: AC_COMPILE_IFELSE (INPUT, [ACTION-IF-TRUE], [ACTION-IF-FALSE]) Run the compiler and compilation flags of the current language (*note Language Choice::) on the INPUT, run the shell commands ACTION-IF-TRUE on success, ACTION-IF-FALSE otherwise. The INPUT can be made by `AC_LANG_PROGRAM' and friends. It is customary to report unexpected failures with `AC_MSG_FAILURE'. This macro does not try to link; use `AC_LINK_IFELSE' if you need to do that (*note Running the Linker::). If needed, ACTION-IF-TRUE can further access the just-compiled object file `conftest.$OBJEXT'. This macro uses `AC_REQUIRE' for the compiler associated with the current language, which means that if the compiler has not yet been determined, the compiler determination will be made prior to the body of the outermost `AC_DEFUN' macro that triggered this macro to expand (*note Expanded Before Required::). For tests in Erlang, the INPUT must be the source code of a module named `conftest'. `AC_COMPILE_IFELSE' generates a `conftest.beam' file that can be interpreted by the Erlang virtual machine (`ERL'). It is recommended to use `AC_LANG_PROGRAM' to specify the test program, to ensure that the Erlang module has the right name.  File: autoconf.info, Node: Running the Linker, Next: Runtime, Prev: Running the Compiler, Up: Writing Tests 6.5 Running the Linker ====================== To check for a library, a function, or a global variable, Autoconf `configure' scripts try to compile and link a small program that uses it. This is unlike Metaconfig, which by default uses `nm' or `ar' on the C library to try to figure out which functions are available. Trying to link with the function is usually a more reliable approach because it avoids dealing with the variations in the options and output formats of `nm' and `ar' and in the location of the standard libraries. It also allows configuring for cross-compilation or checking a function's runtime behavior if needed. On the other hand, it can be slower than scanning the libraries once, but accuracy is more important than speed. `AC_LINK_IFELSE' is used to compile test programs to test for functions and global variables. It is also used by `AC_CHECK_LIB' to check for libraries (*note Libraries::), by adding the library being checked for to `LIBS' temporarily and trying to link a small program. -- Macro: AC_LINK_IFELSE (INPUT, [ACTION-IF-TRUE], [ACTION-IF-FALSE]) Run the compiler (and compilation flags) and the linker of the current language (*note Language Choice::) on the INPUT, run the shell commands ACTION-IF-TRUE on success, ACTION-IF-FALSE otherwise. The INPUT can be made by `AC_LANG_PROGRAM' and friends. If needed, ACTION-IF-TRUE can further access the just-linked program file `conftest$EXEEXT'. `LDFLAGS' and `LIBS' are used for linking, in addition to the current compilation flags. It is customary to report unexpected failures with `AC_MSG_FAILURE'. This macro does not try to execute the program; use `AC_RUN_IFELSE' if you need to do that (*note Runtime::). The `AC_LINK_IFELSE' macro cannot be used for Erlang tests, since Erlang programs are interpreted and do not require linking.  File: autoconf.info, Node: Runtime, Next: Systemology, Prev: Running the Linker, Up: Writing Tests 6.6 Checking Runtime Behavior ============================= Sometimes you need to find out how a system performs at runtime, such as whether a given function has a certain capability or bug. If you can, make such checks when your program runs instead of when it is configured. You can check for things like the machine's endianness when your program initializes itself. If you really need to test for a runtime behavior while configuring, you can write a test program to determine the result, and compile and run it using `AC_RUN_IFELSE'. Avoid running test programs if possible, because this prevents people from configuring your package for cross-compiling. -- Macro: AC_RUN_IFELSE (INPUT, [ACTION-IF-TRUE], [ACTION-IF-FALSE], [ACTION-IF-CROSS-COMPILING = `AC_MSG_FAILURE']) Run the compiler (and compilation flags) and the linker of the current language (*note Language Choice::) on the INPUT, then execute the resulting program. If the program returns an exit status of 0 when executed, run shell commands ACTION-IF-TRUE. Otherwise, run shell commands ACTION-IF-FALSE. The INPUT can be made by `AC_LANG_PROGRAM' and friends. `LDFLAGS' and `LIBS' are used for linking, in addition to the compilation flags of the current language (*note Language Choice::). Additionally, ACTION-IF-TRUE can run `./conftest$EXEEXT' for further testing. In the ACTION-IF-FALSE section, the failing exit status is available in the shell variable `$?'. This exit status might be that of a failed compilation, or it might be that of a failed program execution. If cross-compilation mode is enabled (this is the case if either the compiler being used does not produce executables that run on the system where `configure' is being run, or if the options `--build' and `--host' were both specified and their values are different), then the test program is not run. If the optional shell commands ACTION-IF-CROSS-COMPILING are given, those commands are run instead; typically these commands provide pessimistic defaults that allow cross-compilation to work even if the guess was wrong. If the fourth argument is empty or omitted, but cross-compilation is detected, then `configure' prints an error message and exits. If you want your package to be useful in a cross-compilation scenario, you _should_ provide a non-empty ACTION-IF-CROSS-COMPILING clause, as well as wrap the `AC_RUN_IFELSE' compilation inside an `AC_CACHE_CHECK' (*note Caching Results::) which allows the user to override the pessimistic default if needed. It is customary to report unexpected failures with `AC_MSG_FAILURE'. `autoconf' prints a warning message when creating `configure' each time it encounters a call to `AC_RUN_IFELSE' with no ACTION-IF-CROSS-COMPILING argument given. If you are not concerned about users configuring your package for cross-compilation, you may ignore the warning. A few of the macros distributed with Autoconf produce this warning message; but if this is a problem for you, please report it as a bug, along with an appropriate pessimistic guess to use instead. To configure for cross-compiling you can also choose a value for those parameters based on the canonical system name (*note Manual Configuration::). Alternatively, set up a test results cache file with the correct values for the host system (*note Caching Results::). To provide a default for calls of `AC_RUN_IFELSE' that are embedded in other macros, including a few of the ones that come with Autoconf, you can test whether the shell variable `cross_compiling' is set to `yes', and then use an alternate method to get the results instead of calling the macros. It is also permissible to temporarily assign to `cross_compiling' in order to force tests to behave as though they are in a cross-compilation environment, particularly since this provides a way to test your ACTION-IF-CROSS-COMPILING even when you are not using a cross-compiler. # We temporarily set cross-compile mode to force AC_COMPUTE_INT # to use the slow link-only method save_cross_compiling=$cross_compiling cross_compiling=yes AC_COMPUTE_INT([...]) cross_compiling=$save_cross_compiling A C or C++ runtime test should be portable. *Note Portable C and C++::. Erlang tests must exit themselves the Erlang VM by calling the `halt/1' function: the given status code is used to determine the success of the test (status is `0') or its failure (status is different than `0'), as explained above. It must be noted that data output through the standard output (e.g., using `io:format/2') may be truncated when halting the VM. Therefore, if a test must output configuration information, it is recommended to create and to output data into the temporary file named `conftest.out', using the functions of module `file'. The `conftest.out' file is automatically deleted by the `AC_RUN_IFELSE' macro. For instance, a simplified implementation of Autoconf's `AC_ERLANG_SUBST_LIB_DIR' macro is: AC_INIT([LibdirTest], [1.0], [bug-libdirtest@example.org]) AC_ERLANG_NEED_ERL AC_LANG(Erlang) AC_RUN_IFELSE( [AC_LANG_PROGRAM([], [dnl file:write_file("conftest.out", code:lib_dir()), halt(0)])], [echo "code:lib_dir() returned: `cat conftest.out`"], [AC_MSG_FAILURE([test Erlang program execution failed])])  File: autoconf.info, Node: Systemology, Next: Multiple Cases, Prev: Runtime, Up: Writing Tests 6.7 Systemology =============== This section aims at presenting some systems and pointers to documentation. It may help you addressing particular problems reported by users. Posix-conforming systems (http://www.opengroup.org/susv3) are derived from the Unix operating system (http://www.bell-labs.com/history/unix/). The Rosetta Stone for Unix (http://bhami.com/rosetta.html) contains a table correlating the features of various Posix-conforming systems. Unix History (http://www.levenez.com/unix/) is a simplified diagram of how many Unix systems were derived from each other. The Heirloom Project (http://heirloom.sourceforge.net/) provides some variants of traditional implementations of Unix utilities. Darwin Darwin is also known as Mac OS X. Beware that the file system _can_ be case-preserving, but case insensitive. This can cause nasty problems, since for instance the installation attempt for a package having an `INSTALL' file can result in `make install' report that nothing was to be done! That's all dependent on whether the file system is a UFS (case sensitive) or HFS+ (case preserving). By default Apple wants you to install the OS on HFS+. Unfortunately, there are some pieces of software which really need to be built on UFS. We may want to rebuild Darwin to have both UFS and HFS+ available (and put the /local/build tree on the UFS). QNX 4.25 QNX is a realtime operating system running on Intel architecture meant to be scalable from the small embedded systems to the hundred processor super-computer. It claims to be Posix certified. More information is available on the QNX home page (http://www.qnx.com/). Tru64 Documentation of several versions of Tru64 (http://h30097.www3.hp.com/docs/) is available in different formats. Unix version 7 Officially this was called the "Seventh Edition" of "the UNIX time-sharing system" but we use the more-common name "Unix version 7". Documentation is available in the Unix Seventh Edition Manual (http://plan9.bell-labs.com/7thEdMan/). Previous versions of Unix are called "Unix version 6", etc., but they were not as widely used.  File: autoconf.info, Node: Multiple Cases, Prev: Systemology, Up: Writing Tests 6.8 Multiple Cases ================== Some operations are accomplished in several possible ways, depending on the OS variant. Checking for them essentially requires a "case statement". Autoconf does not directly provide one; however, it is easy to simulate by using a shell variable to keep track of whether a way to perform the operation has been found yet. Here is an example that uses the shell variable `fstype' to keep track of whether the remaining cases need to be checked. Note that since the value of `fstype' is under our control, we don't have to use the longer `test "x$fstype" = xno'. AC_MSG_CHECKING([how to get file system type]) fstype=no # The order of these tests is important. AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include ]])], [AC_DEFINE([FSTYPE_STATVFS], [1], [Define if statvfs exists.]) fstype=SVR4]) if test $fstype = no; then AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include ]])], [AC_DEFINE([FSTYPE_USG_STATFS], [1], [Define if USG statfs.]) fstype=SVR3]) fi if test $fstype = no; then AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include ]])]), [AC_DEFINE([FSTYPE_AIX_STATFS], [1], [Define if AIX statfs.]) fstype=AIX]) fi # (more cases omitted here) AC_MSG_RESULT([$fstype])  File: autoconf.info, Node: Results, Next: Programming in M4, Prev: Writing Tests, Up: Top 7 Results of Tests ****************** Once `configure' has determined whether a feature exists, what can it do to record that information? There are four sorts of things it can do: define a C preprocessor symbol, set a variable in the output files, save the result in a cache file for future `configure' runs, and print a message letting the user know the result of the test. * Menu: * Defining Symbols:: Defining C preprocessor symbols * Setting Output Variables:: Replacing variables in output files * Special Chars in Variables:: Characters to beware of in variables * Caching Results:: Speeding up subsequent `configure' runs * Printing Messages:: Notifying `configure' users  File: autoconf.info, Node: Defining Symbols, Next: Setting Output Variables, Up: Results 7.1 Defining C Preprocessor Symbols =================================== A common action to take in response to a feature test is to define a C preprocessor symbol indicating the results of the test. That is done by calling `AC_DEFINE' or `AC_DEFINE_UNQUOTED'. By default, `AC_OUTPUT' places the symbols defined by these macros into the output variable `DEFS', which contains an option `-DSYMBOL=VALUE' for each symbol defined. Unlike in Autoconf version 1, there is no variable `DEFS' defined while `configure' is running. To check whether Autoconf macros have already defined a certain C preprocessor symbol, test the value of the appropriate cache variable, as in this example: AC_CHECK_FUNC([vprintf], [AC_DEFINE([HAVE_VPRINTF], [1], [Define if vprintf exists.])]) if test "x$ac_cv_func_vprintf" != xyes; then AC_CHECK_FUNC([_doprnt], [AC_DEFINE([HAVE_DOPRNT], [1], [Define if _doprnt exists.])]) fi If `AC_CONFIG_HEADERS' has been called, then instead of creating `DEFS', `AC_OUTPUT' creates a header file by substituting the correct values into `#define' statements in a template file. *Note Configuration Headers::, for more information about this kind of output. -- Macro: AC_DEFINE (VARIABLE, VALUE, [DESCRIPTION]) -- Macro: AC_DEFINE (VARIABLE) Define VARIABLE to VALUE (verbatim), by defining a C preprocessor macro for VARIABLE. VARIABLE should be a C identifier, optionally suffixed by a parenthesized argument list to define a C preprocessor macro with arguments. The macro argument list, if present, should be a comma-separated list of C identifiers, possibly terminated by an ellipsis `...' if C99 syntax is employed. VARIABLE should not contain comments, white space, trigraphs, backslash-newlines, universal character names, or non-ASCII characters. VALUE may contain backslash-escaped newlines, which will be preserved if you use `AC_CONFIG_HEADERS' but flattened if passed via `@DEFS@' (with no effect on the compilation, since the preprocessor sees only one line in the first place). VALUE should not contain raw newlines. If you are not using `AC_CONFIG_HEADERS', VALUE should not contain any `#' characters, as `make' tends to eat them. To use a shell variable, use `AC_DEFINE_UNQUOTED' instead. DESCRIPTION is only useful if you are using `AC_CONFIG_HEADERS'. In this case, DESCRIPTION is put into the generated `config.h.in' as the comment before the macro define. The following example defines the C preprocessor variable `EQUATION' to be the string constant `"$a > $b"': AC_DEFINE([EQUATION], ["$a > $b"], [Equation string.]) If neither VALUE nor DESCRIPTION are given, then VALUE defaults to 1 instead of to the empty string. This is for backwards compatibility with older versions of Autoconf, but this usage is obsolescent and may be withdrawn in future versions of Autoconf. If the VARIABLE is a literal string, it is passed to `m4_pattern_allow' (*note Forbidden Patterns::). If multiple `AC_DEFINE' statements are executed for the same VARIABLE name (not counting any parenthesized argument list), the last one wins. -- Macro: AC_DEFINE_UNQUOTED (VARIABLE, VALUE, [DESCRIPTION]) -- Macro: AC_DEFINE_UNQUOTED (VARIABLE) Like `AC_DEFINE', but three shell expansions are performed--once--on VARIABLE and VALUE: variable expansion (`$'), command substitution (``'), and backslash escaping (`\'), as if in an unquoted here-document. Single and double quote characters in the value have no special meaning. Use this macro instead of `AC_DEFINE' when VARIABLE or VALUE is a shell variable. Examples: AC_DEFINE_UNQUOTED([config_machfile], ["$machfile"], [Configuration machine file.]) AC_DEFINE_UNQUOTED([GETGROUPS_T], [$ac_cv_type_getgroups], [getgroups return type.]) AC_DEFINE_UNQUOTED([$ac_tr_hdr], [1], [Translated header name.]) Due to a syntactical bizarreness of the Bourne shell, do not use semicolons to separate `AC_DEFINE' or `AC_DEFINE_UNQUOTED' calls from other macro calls or shell code; that can cause syntax errors in the resulting `configure' script. Use either blanks or newlines. That is, do this: AC_CHECK_HEADER([elf.h], [AC_DEFINE([SVR4], [1], [System V Release 4]) LIBS="-lelf $LIBS"]) or this: AC_CHECK_HEADER([elf.h], [AC_DEFINE([SVR4], [1], [System V Release 4]) LIBS="-lelf $LIBS"]) instead of this: AC_CHECK_HEADER([elf.h], [AC_DEFINE([SVR4], [1], [System V Release 4]); LIBS="-lelf $LIBS"])  File: autoconf.info, Node: Setting Output Variables, Next: Special Chars in Variables, Prev: Defining Symbols, Up: Results 7.2 Setting Output Variables ============================ Another way to record the results of tests is to set "output variables", which are shell variables whose values are substituted into files that `configure' outputs. The two macros below create new output variables. *Note Preset Output Variables::, for a list of output variables that are always available. -- Macro: AC_SUBST (VARIABLE, [VALUE]) Create an output variable from a shell variable. Make `AC_OUTPUT' substitute the variable VARIABLE into output files (typically one or more makefiles). This means that `AC_OUTPUT' replaces instances of `@VARIABLE@' in input files with the value that the shell variable VARIABLE has when `AC_OUTPUT' is called. The value can contain any non-`NUL' character, including newline. If you are using Automake 1.11 or newer, for newlines in values you might want to consider using `AM_SUBST_NOTMAKE' to prevent `automake' from adding a line `VARIABLE = @VARIABLE@' to the `Makefile.in' files (*note Automake: (automake)Optional.). Variable occurrences should not overlap: e.g., an input file should not contain `@VAR1@VAR2@' if VAR1 and VAR2 are variable names. The substituted value is not rescanned for more output variables; occurrences of `@VARIABLE@' in the value are inserted literally into the output file. (The algorithm uses the special marker `|#_!!_#|' internally, so neither the substituted value nor the output file may contain `|#_!!_#|'.) If VALUE is given, in addition assign it to VARIABLE. The string VARIABLE is passed to `m4_pattern_allow' (*note Forbidden Patterns::). -- Macro: AC_SUBST_FILE (VARIABLE) Another way to create an output variable from a shell variable. Make `AC_OUTPUT' insert (without substitutions) the contents of the file named by shell variable VARIABLE into output files. This means that `AC_OUTPUT' replaces instances of `@VARIABLE@' in output files (such as `Makefile.in') with the contents of the file that the shell variable VARIABLE names when `AC_OUTPUT' is called. Set the variable to `/dev/null' for cases that do not have a file to insert. This substitution occurs only when the `@VARIABLE@' is on a line by itself, optionally surrounded by spaces and tabs. The substitution replaces the whole line, including the spaces, tabs, and the terminating newline. This macro is useful for inserting makefile fragments containing special dependencies or other `make' directives for particular host or target types into makefiles. For example, `configure.ac' could contain: AC_SUBST_FILE([host_frag]) host_frag=$srcdir/conf/sun4.mh and then a `Makefile.in' could contain: @host_frag@ The string VARIABLE is passed to `m4_pattern_allow' (*note Forbidden Patterns::). Running `configure' in varying environments can be extremely dangerous. If for instance the user runs `CC=bizarre-cc ./configure', then the cache, `config.h', and many other output files depend upon `bizarre-cc' being the C compiler. If for some reason the user runs `./configure' again, or if it is run via `./config.status --recheck', (*Note Automatic Remaking::, and *note config.status Invocation::), then the configuration can be inconsistent, composed of results depending upon two different compilers. Environment variables that affect this situation, such as `CC' above, are called "precious variables", and can be declared as such by `AC_ARG_VAR'. -- Macro: AC_ARG_VAR (VARIABLE, DESCRIPTION) Declare VARIABLE is a precious variable, and include its DESCRIPTION in the variable section of `./configure --help'. Being precious means that - VARIABLE is substituted via `AC_SUBST'. - The value of VARIABLE when `configure' was launched is saved in the cache, including if it was not specified on the command line but via the environment. Indeed, while `configure' can notice the definition of `CC' in `./configure CC=bizarre-cc', it is impossible to notice it in `CC=bizarre-cc ./configure', which, unfortunately, is what most users do. We emphasize that it is the _initial_ value of VARIABLE which is saved, not that found during the execution of `configure'. Indeed, specifying `./configure FOO=foo' and letting `./configure' guess that `FOO' is `foo' can be two different things. - VARIABLE is checked for consistency between two `configure' runs. For instance: $ ./configure --silent --config-cache $ CC=cc ./configure --silent --config-cache configure: error: `CC' was not set in the previous run configure: error: changes in the environment can compromise \ the build configure: error: run `make distclean' and/or \ `rm config.cache' and start over and similarly if the variable is unset, or if its content is changed. If the content has white space changes only, then the error is degraded to a warning only, but the old value is reused. - VARIABLE is kept during automatic reconfiguration (*note config.status Invocation::) as if it had been passed as a command line argument, including when no cache is used: $ CC=/usr/bin/cc ./configure var=raboof --silent $ ./config.status --recheck running CONFIG_SHELL=/bin/sh /bin/sh ./configure var=raboof \ CC=/usr/bin/cc --no-create --no-recursion  File: autoconf.info, Node: Special Chars in Variables, Next: Caching Results, Prev: Setting Output Variables, Up: Results 7.3 Special Characters in Output Variables ========================================== Many output variables are intended to be evaluated both by `make' and by the shell. Some characters are expanded differently in these two contexts, so to avoid confusion these variables' values should not contain any of the following characters: " # $ & ' ( ) * ; < > ? [ \ ^ ` | Also, these variables' values should neither contain newlines, nor start with `~', nor contain white space or `:' immediately followed by `~'. The values can contain nonempty sequences of white space characters like tabs and spaces, but each such sequence might arbitrarily be replaced by a single space during substitution. These restrictions apply both to the values that `configure' computes, and to the values set directly by the user. For example, the following invocations of `configure' are problematic, since they attempt to use special characters within `CPPFLAGS' and white space within `$(srcdir)': CPPFLAGS='-DOUCH="&\"#$*?"' '../My Source/ouch-1.0/configure' '../My Source/ouch-1.0/configure' CPPFLAGS='-DOUCH="&\"#$*?"'  File: autoconf.info, Node: Caching Results, Next: Printing Messages, Prev: Special Chars in Variables, Up: Results 7.4 Caching Results =================== To avoid checking for the same features repeatedly in various `configure' scripts (or in repeated runs of one script), `configure' can optionally save the results of many checks in a "cache file" (*note Cache Files::). If a `configure' script runs with caching enabled and finds a cache file, it reads the results of previous runs from the cache and avoids rerunning those checks. As a result, `configure' can then run much faster than if it had to perform all of the checks every time. -- Macro: AC_CACHE_VAL (CACHE-ID, COMMANDS-TO-SET-IT) Ensure that the results of the check identified by CACHE-ID are available. If the results of the check were in the cache file that was read, and `configure' was not given the `--quiet' or `--silent' option, print a message saying that the result was cached; otherwise, run the shell commands COMMANDS-TO-SET-IT. If the shell commands are run to determine the value, the value is saved in the cache file just before `configure' creates its output files. *Note Cache Variable Names::, for how to choose the name of the CACHE-ID variable. The COMMANDS-TO-SET-IT _must have no side effects_ except for setting the variable CACHE-ID, see below. -- Macro: AC_CACHE_CHECK (MESSAGE, CACHE-ID, COMMANDS-TO-SET-IT) A wrapper for `AC_CACHE_VAL' that takes care of printing the messages. This macro provides a convenient shorthand for the most common way to use these macros. It calls `AC_MSG_CHECKING' for MESSAGE, then `AC_CACHE_VAL' with the CACHE-ID and COMMANDS arguments, and `AC_MSG_RESULT' with CACHE-ID. The COMMANDS-TO-SET-IT _must have no side effects_ except for setting the variable CACHE-ID, see below. It is common to find buggy macros using `AC_CACHE_VAL' or `AC_CACHE_CHECK', because people are tempted to call `AC_DEFINE' in the COMMANDS-TO-SET-IT. Instead, the code that _follows_ the call to `AC_CACHE_VAL' should call `AC_DEFINE', by examining the value of the cache variable. For instance, the following macro is broken: AC_DEFUN([AC_SHELL_TRUE], [AC_CACHE_CHECK([whether true(1) works], [my_cv_shell_true_works], [my_cv_shell_true_works=no (true) 2>/dev/null && my_cv_shell_true_works=yes if test "x$my_cv_shell_true_works" = xyes; then AC_DEFINE([TRUE_WORKS], [1], [Define if `true(1)' works properly.]) fi]) ]) This fails if the cache is enabled: the second time this macro is run, `TRUE_WORKS' _will not be defined_. The proper implementation is: AC_DEFUN([AC_SHELL_TRUE], [AC_CACHE_CHECK([whether true(1) works], [my_cv_shell_true_works], [my_cv_shell_true_works=no (true) 2>/dev/null && my_cv_shell_true_works=yes]) if test "x$my_cv_shell_true_works" = xyes; then AC_DEFINE([TRUE_WORKS], [1], [Define if `true(1)' works properly.]) fi ]) Also, COMMANDS-TO-SET-IT should not print any messages, for example with `AC_MSG_CHECKING'; do that before calling `AC_CACHE_VAL', so the messages are printed regardless of whether the results of the check are retrieved from the cache or determined by running the shell commands. * Menu: * Cache Variable Names:: Shell variables used in caches * Cache Files:: Files `configure' uses for caching * Cache Checkpointing:: Loading and saving the cache file  File: autoconf.info, Node: Cache Variable Names, Next: Cache Files, Up: Caching Results 7.4.1 Cache Variable Names -------------------------- The names of cache variables should have the following format: PACKAGE-PREFIX_cv_VALUE-TYPE_SPECIFIC-VALUE_[ADDITIONAL-OPTIONS] for example, `ac_cv_header_stat_broken' or `ac_cv_prog_gcc_traditional'. The parts of the variable name are: PACKAGE-PREFIX An abbreviation for your package or organization; the same prefix you begin local Autoconf macros with, except lowercase by convention. For cache values used by the distributed Autoconf macros, this value is `ac'. `_cv_' Indicates that this shell variable is a cache value. This string _must_ be present in the variable name, including the leading underscore. VALUE-TYPE A convention for classifying cache values, to produce a rational naming system. The values used in Autoconf are listed in *note Macro Names::. SPECIFIC-VALUE Which member of the class of cache values this test applies to. For example, which function (`alloca'), program (`gcc'), or output variable (`INSTALL'). ADDITIONAL-OPTIONS Any particular behavior of the specific member that this test applies to. For example, `broken' or `set'. This part of the name may be omitted if it does not apply. The values assigned to cache variables may not contain newlines. Usually, their values are Boolean (`yes' or `no') or the names of files or functions; so this is not an important restriction. *note Cache Variable Index:: for an index of cache variables with documented semantics.  File: autoconf.info, Node: Cache Files, Next: Cache Checkpointing, Prev: Cache Variable Names, Up: Caching Results 7.4.2 Cache Files ----------------- A cache file is a shell script that caches the results of configure tests run on one system so they can be shared between configure scripts and configure runs. It is not useful on other systems. If its contents are invalid for some reason, the user may delete or edit it, or override documented cache variables on the `configure' command line. By default, `configure' uses no cache file, to avoid problems caused by accidental use of stale cache files. To enable caching, `configure' accepts `--config-cache' (or `-C') to cache results in the file `config.cache'. Alternatively, `--cache-file=FILE' specifies that FILE be the cache file. The cache file is created if it does not exist already. When `configure' calls `configure' scripts in subdirectories, it uses the `--cache-file' argument so that they share the same cache. *Note Subdirectories::, for information on configuring subdirectories with the `AC_CONFIG_SUBDIRS' macro. `config.status' only pays attention to the cache file if it is given the `--recheck' option, which makes it rerun `configure'. It is wrong to try to distribute cache files for particular system types. There is too much room for error in doing that, and too much administrative overhead in maintaining them. For any features that can't be guessed automatically, use the standard method of the canonical system type and linking files (*note Manual Configuration::). The site initialization script can specify a site-wide cache file to use, instead of the usual per-program cache. In this case, the cache file gradually accumulates information whenever someone runs a new `configure' script. (Running `configure' merges the new cache results with the existing cache file.) This may cause problems, however, if the system configuration (e.g., the installed libraries or compilers) changes and the stale cache file is not deleted. If `configure' is interrupted at the right time when it updates a cache file outside of the build directory where the `configure' script is run, it may leave behind a temporary file named after the cache file with digits following it. You may safely delete such a file.  File: autoconf.info, Node: Cache Checkpointing, Prev: Cache Files, Up: Caching Results 7.4.3 Cache Checkpointing ------------------------- If your configure script, or a macro called from `configure.ac', happens to abort the configure process, it may be useful to checkpoint the cache a few times at key points using `AC_CACHE_SAVE'. Doing so reduces the amount of time it takes to rerun the configure script with (hopefully) the error that caused the previous abort corrected. -- Macro: AC_CACHE_LOAD Loads values from existing cache file, or creates a new cache file if a cache file is not found. Called automatically from `AC_INIT'. -- Macro: AC_CACHE_SAVE Flushes all cached values to the cache file. Called automatically from `AC_OUTPUT', but it can be quite useful to call `AC_CACHE_SAVE' at key points in `configure.ac'. For instance: ... AC_INIT, etc. ... # Checks for programs. AC_PROG_CC AC_PROG_AWK ... more program checks ... AC_CACHE_SAVE # Checks for libraries. AC_CHECK_LIB([nsl], [gethostbyname]) AC_CHECK_LIB([socket], [connect]) ... more lib checks ... AC_CACHE_SAVE # Might abort... AM_PATH_GTK([1.0.2], [], [AC_MSG_ERROR([GTK not in path])]) AM_PATH_GTKMM([0.9.5], [], [AC_MSG_ERROR([GTK not in path])]) ... AC_OUTPUT, etc. ...  File: autoconf.info, Node: Printing Messages, Prev: Caching Results, Up: Results 7.5 Printing Messages ===================== `configure' scripts need to give users running them several kinds of information. The following macros print messages in ways appropriate for each kind. The arguments to all of them get enclosed in shell double quotes, so the shell performs variable and back-quote substitution on them. These macros are all wrappers around the `echo' shell command. They direct output to the appropriate file descriptor (*note File Descriptor Macros::). `configure' scripts should rarely need to run `echo' directly to print messages for the user. Using these macros makes it easy to change how and when each kind of message is printed; such changes need only be made to the macro definitions and all the callers change automatically. To diagnose static issues, i.e., when `autoconf' is run, see *note Diagnostic Macros::. -- Macro: AC_MSG_CHECKING (FEATURE-DESCRIPTION) Notify the user that `configure' is checking for a particular feature. This macro prints a message that starts with `checking ' and ends with `...' and no newline. It must be followed by a call to `AC_MSG_RESULT' to print the result of the check and the newline. The FEATURE-DESCRIPTION should be something like `whether the Fortran compiler accepts C++ comments' or `for c89'. This macro prints nothing if `configure' is run with the `--quiet' or `--silent' option. -- Macro: AC_MSG_RESULT (RESULT-DESCRIPTION) Notify the user of the results of a check. RESULT-DESCRIPTION is almost always the value of the cache variable for the check, typically `yes', `no', or a file name. This macro should follow a call to `AC_MSG_CHECKING', and the RESULT-DESCRIPTION should be the completion of the message printed by the call to `AC_MSG_CHECKING'. This macro prints nothing if `configure' is run with the `--quiet' or `--silent' option. -- Macro: AC_MSG_NOTICE (MESSAGE) Deliver the MESSAGE to the user. It is useful mainly to print a general description of the overall purpose of a group of feature checks, e.g., AC_MSG_NOTICE([checking if stack overflow is detectable]) This macro prints nothing if `configure' is run with the `--quiet' or `--silent' option. -- Macro: AC_MSG_ERROR (ERROR-DESCRIPTION, [EXIT-STATUS = `$?/1']) Notify the user of an error that prevents `configure' from completing. This macro prints an error message to the standard error output and exits `configure' with EXIT-STATUS (`$?' by default, except that `0' is converted to `1'). ERROR-DESCRIPTION should be something like `invalid value $HOME for \$HOME'. The ERROR-DESCRIPTION should start with a lower-case letter, and "cannot" is preferred to "can't". -- Macro: AC_MSG_FAILURE (ERROR-DESCRIPTION, [EXIT-STATUS]) This `AC_MSG_ERROR' wrapper notifies the user of an error that prevents `configure' from completing _and_ that additional details are provided in `config.log'. This is typically used when abnormal results are found during a compilation. -- Macro: AC_MSG_WARN (PROBLEM-DESCRIPTION) Notify the `configure' user of a possible problem. This macro prints the message to the standard error output; `configure' continues running afterward, so macros that call `AC_MSG_WARN' should provide a default (back-up) behavior for the situations they warn about. PROBLEM-DESCRIPTION should be something like `ln -s seems to make hard links'.  File: autoconf.info, Node: Programming in M4, Next: Programming in M4sh, Prev: Results, Up: Top 8 Programming in M4 ******************* Autoconf is written on top of two layers: "M4sugar", which provides convenient macros for pure M4 programming, and "M4sh", which provides macros dedicated to shell script generation. As of this version of Autoconf, these two layers still contain experimental macros, whose interface might change in the future. As a matter of fact, _anything that is not documented must not be used_. * Menu: * M4 Quotation:: Protecting macros from unwanted expansion * Using autom4te:: The Autoconf executables backbone * Programming in M4sugar:: Convenient pure M4 macros * Debugging via autom4te:: Figuring out what M4 was doing  File: autoconf.info, Node: M4 Quotation, Next: Using autom4te, Up: Programming in M4 8.1 M4 Quotation ================ The most common problem with existing macros is an improper quotation. This section, which users of Autoconf can skip, but which macro writers _must_ read, first justifies the quotation scheme that was chosen for Autoconf and then ends with a rule of thumb. Understanding the former helps one to follow the latter. * Menu: * Active Characters:: Characters that change the behavior of M4 * One Macro Call:: Quotation and one macro call * Quoting and Parameters:: M4 vs. shell parameters * Quotation and Nested Macros:: Macros calling macros * Changequote is Evil:: Worse than INTERCAL: M4 + changequote * Quadrigraphs:: Another way to escape special characters * Balancing Parentheses:: Dealing with unbalanced parentheses * Quotation Rule Of Thumb:: One parenthesis, one quote  File: autoconf.info, Node: Active Characters, Next: One Macro Call, Up: M4 Quotation 8.1.1 Active Characters ----------------------- To fully understand where proper quotation is important, you first need to know what the special characters are in Autoconf: `#' introduces a comment inside which no macro expansion is performed, `,' separates arguments, `[' and `]' are the quotes themselves(1), `(' and `)' (which M4 tries to match by pairs), and finally `$' inside a macro definition. In order to understand the delicate case of macro calls, we first have to present some obvious failures. Below they are "obvious-ified", but when you find them in real life, they are usually in disguise. Comments, introduced by a hash and running up to the newline, are opaque tokens to the top level: active characters are turned off, and there is no macro expansion: # define([def], ine) =># define([def], ine) Each time there can be a macro expansion, there is a quotation expansion, i.e., one level of quotes is stripped: int tab[10]; =>int tab10; [int tab[10];] =>int tab[10]; Without this in mind, the reader might try hopelessly to use her macro `array': define([array], [int tab[10];]) array =>int tab10; [array] =>array How can you correctly output the intended results(2)? ---------- Footnotes ---------- (1) By itself, M4 uses ``' and `''; it is the M4sugar layer that sets up the preferred quotes of `[' and `]'. (2) Using `defn'.  File: autoconf.info, Node: One Macro Call, Next: Quoting and Parameters, Prev: Active Characters, Up: M4 Quotation 8.1.2 One Macro Call -------------------- Let's proceed on the interaction between active characters and macros with this small macro, which just returns its first argument: define([car], [$1]) The two pairs of quotes above are not part of the arguments of `define'; rather, they are understood by the top level when it tries to find the arguments of `define'. Therefore, assuming `car' is not already defined, it is equivalent to write: define(car, $1) But, while it is acceptable for a `configure.ac' to avoid unnecessary quotes, it is bad practice for Autoconf macros which must both be more robust and also advocate perfect style. At the top level, there are only two possibilities: either you quote or you don't: car(foo, bar, baz) =>foo [car(foo, bar, baz)] =>car(foo, bar, baz) Let's pay attention to the special characters: car(#) error-->EOF in argument list The closing parenthesis is hidden in the comment; with a hypothetical quoting, the top level understood it this way: car([#)] Proper quotation, of course, fixes the problem: car([#]) =># Here are more examples: car(foo, bar) =>foo car([foo, bar]) =>foo, bar car((foo, bar)) =>(foo, bar) car([(foo], [bar)]) =>(foo define([a], [b]) => car(a) =>b car([a]) =>b car([[a]]) =>a car([[[a]]]) =>[a]  File: autoconf.info, Node: Quoting and Parameters, Next: Quotation and Nested Macros, Prev: One Macro Call, Up: M4 Quotation 8.1.3 Quoting and Parameters ---------------------------- When M4 encounters `$' within a macro definition, followed immediately by a character it recognizes (`0'...`9', `#', `@', or `*'), it will perform M4 parameter expansion. This happens regardless of how many layers of quotes the parameter expansion is nested within, or even if it occurs in text that will be rescanned as a comment. define([none], [$1]) => define([one], [[$1]]) => define([two], [[[$1]]]) => define([comment], [# $1]) => define([active], [ACTIVE]) => none([active]) =>ACTIVE one([active]) =>active two([active]) =>[active] comment([active]) =># active On the other hand, since autoconf generates shell code, you often want to output shell variable expansion, rather than performing M4 parameter expansion. To do this, you must use M4 quoting to separate the `$' from the next character in the definition of your macro. If the macro definition occurs in single-quoted text, then insert another level of quoting; if the usage is already inside a double-quoted string, then split it into concatenated strings. define([single], [a single-quoted $[]1 definition]) => define([double], [[a double-quoted $][1 definition]]) => single =>a single-quoted $1 definition double =>a double-quoted $1 definition Posix states that M4 implementations are free to provide implementation extensions when `${' is encountered in a macro definition. Autoconf reserves the longer sequence `${{' for use with planned extensions that will be available in the future GNU M4 2.0, but guarantees that all other instances of `${' will be output literally. Therefore, this idiom can also be used to output shell code parameter references: define([first], [${1}])first =>${1} Posix also states that `$11' should expand to the first parameter concatenated with a literal `1', although some versions of GNU M4 expand the eleventh parameter instead. For portability, you should only use single-digit M4 parameter expansion. With this in mind, we can explore the cases where macros invoke macros...  File: autoconf.info, Node: Quotation and Nested Macros, Next: Changequote is Evil, Prev: Quoting and Parameters, Up: M4 Quotation 8.1.4 Quotation and Nested Macros --------------------------------- The examples below use the following macros: define([car], [$1]) define([active], [ACT, IVE]) define([array], [int tab[10]]) Each additional embedded macro call introduces other possible interesting quotations: car(active) =>ACT car([active]) =>ACT, IVE car([[active]]) =>active In the first case, the top level looks for the arguments of `car', and finds `active'. Because M4 evaluates its arguments before applying the macro, `active' is expanded, which results in: car(ACT, IVE) =>ACT In the second case, the top level gives `active' as first and only argument of `car', which results in: active =>ACT, IVE i.e., the argument is evaluated _after_ the macro that invokes it. In the third case, `car' receives `[active]', which results in: [active] =>active exactly as we already saw above. The example above, applied to a more realistic example, gives: car(int tab[10];) =>int tab10; car([int tab[10];]) =>int tab10; car([[int tab[10];]]) =>int tab[10]; Huh? The first case is easily understood, but why is the second wrong, and the third right? To understand that, you must know that after M4 expands a macro, the resulting text is immediately subjected to macro expansion and quote removal. This means that the quote removal occurs twice--first before the argument is passed to the `car' macro, and second after the `car' macro expands to the first argument. As the author of the Autoconf macro `car', you then consider it to be incorrect that your users have to double-quote the arguments of `car', so you "fix" your macro. Let's call it `qar' for quoted car: define([qar], [[$1]]) and check that `qar' is properly fixed: qar([int tab[10];]) =>int tab[10]; Ahhh! That's much better. But note what you've done: now that the result of `qar' is always a literal string, the only time a user can use nested macros is if she relies on an _unquoted_ macro call: qar(active) =>ACT qar([active]) =>active leaving no way for her to reproduce what she used to do with `car': car([active]) =>ACT, IVE Worse yet: she wants to use a macro that produces a set of `cpp' macros: define([my_includes], [#include ]) car([my_includes]) =>#include qar(my_includes) error-->EOF in argument list This macro, `qar', because it double quotes its arguments, forces its users to leave their macro calls unquoted, which is dangerous. Commas and other active symbols are interpreted by M4 before they are given to the macro, often not in the way the users expect. Also, because `qar' behaves differently from the other macros, it's an exception that should be avoided in Autoconf.  File: autoconf.info, Node: Changequote is Evil, Next: Quadrigraphs, Prev: Quotation and Nested Macros, Up: M4 Quotation 8.1.5 `changequote' is Evil --------------------------- The temptation is often high to bypass proper quotation, in particular when it's late at night. Then, many experienced Autoconf hackers finally surrender to the dark side of the force and use the ultimate weapon: `changequote'. The M4 builtin `changequote' belongs to a set of primitives that allow one to adjust the syntax of the language to adjust it to one's needs. For instance, by default M4 uses ``' and `'' as quotes, but in the context of shell programming (and actually of most programming languages), that's about the worst choice one can make: because of strings and back-quoted expressions in shell code (such as `'this'' and ``that`'), and because of literal characters in usual programming languages (as in `'0''), there are many unbalanced ``' and `''. Proper M4 quotation then becomes a nightmare, if not impossible. In order to make M4 useful in such a context, its designers have equipped it with `changequote', which makes it possible to choose another pair of quotes. M4sugar, M4sh, Autoconf, and Autotest all have chosen to use `[' and `]'. Not especially because they are unlikely characters, but _because they are characters unlikely to be unbalanced_. There are other magic primitives, such as `changecom' to specify what syntactic forms are comments (it is common to see `changecom()' when M4 is used to produce HTML pages), `changeword' and `changesyntax' to change other syntactic details (such as the character to denote the Nth argument, `$' by default, the parentheses around arguments, etc.). These primitives are really meant to make M4 more useful for specific domains: they should be considered like command line options: `--quotes', `--comments', `--words', and `--syntax'. Nevertheless, they are implemented as M4 builtins, as it makes M4 libraries self contained (no need for additional options). There lies the problem... The problem is that it is then tempting to use them in the middle of an M4 script, as opposed to its initialization. This, if not carefully thought out, can lead to disastrous effects: _you are changing the language in the middle of the execution_. Changing and restoring the syntax is often not enough: if you happened to invoke macros in between, these macros are lost, as the current syntax is probably not the one they were implemented with.  File: autoconf.info, Node: Quadrigraphs, Next: Balancing Parentheses, Prev: Changequote is Evil, Up: M4 Quotation 8.1.6 Quadrigraphs ------------------ When writing an Autoconf macro you may occasionally need to generate special characters that are difficult to express with the standard Autoconf quoting rules. For example, you may need to output the regular expression `[^[]', which matches any character other than `['. This expression contains unbalanced brackets so it cannot be put easily into an M4 macro. Additionally, there are a few m4sugar macros (such as `m4_split' and `m4_expand') which internally use special markers in addition to the regular quoting characters. If the arguments to these macros contain the literal strings `-=<{(' or `)}>=-', the macros might behave incorrectly. You can work around these problems by using one of the following "quadrigraphs": `@<:@' `[' `@:>@' `]' `@S|@' `$' `@%:@' `#' `@{:@' `(' `@:}@' `)' `@&t@' Expands to nothing. Quadrigraphs are replaced at a late stage of the translation process, after `m4' is run, so they do not get in the way of M4 quoting. For example, the string `^@<:@', independently of its quotation, appears as `^[' in the output. The empty quadrigraph can be used: - to mark trailing spaces explicitly Trailing spaces are smashed by `autom4te'. This is a feature. - to produce quadrigraphs and other strings reserved by m4sugar For instance `@<@&t@:@' produces `@<:@'. For a more contrived example: m4_define([a], [A])m4_define([b], [B])m4_define([c], [C])dnl m4_split([a )}>=- b -=<{( c]) =>[a], [], [B], [], [c] m4_split([a )}@&t@>=- b -=<@&t@{( c]) =>[a], [)}>=-], [b], [-=<{(], [c] - to escape _occurrences_ of forbidden patterns For instance you might want to mention `AC_FOO' in a comment, while still being sure that `autom4te' still catches unexpanded `AC_*'. Then write `AC@&t@_FOO'. The name `@&t@' was suggested by Paul Eggert: I should give some credit to the `@&t@' pun. The `&' is my own invention, but the `t' came from the source code of the ALGOL68C compiler, written by Steve Bourne (of Bourne shell fame), and which used `mt' to denote the empty string. In C, it would have looked like something like: char const mt[] = ""; but of course the source code was written in Algol 68. I don't know where he got `mt' from: it could have been his own invention, and I suppose it could have been a common pun around the Cambridge University computer lab at the time.  File: autoconf.info, Node: Balancing Parentheses, Next: Quotation Rule Of Thumb, Prev: Quadrigraphs, Up: M4 Quotation 8.1.7 Dealing with unbalanced parentheses ----------------------------------------- One of the pitfalls of portable shell programming is that `case' statements require unbalanced parentheses (*note Limitations of Shell Builtins: case.). With syntax highlighting editors, the presence of unbalanced `)' can interfere with editors that perform syntax highlighting of macro contents based on finding the matching `('. Another concern is how much editing must be done when transferring code snippets between shell scripts and macro definitions. But most importantly, the presence of unbalanced parentheses can introduce expansion bugs. For an example, here is an underquoted attempt to use the macro `my_case', which happens to expand to a portable `case' statement: AC_DEFUN([my_case], [case $file_name in *.c) echo "C source code";; esac]) AS_IF(:, my_case) In the above example, the `AS_IF' call underquotes its arguments. As a result, the unbalanced `)' generated by the premature expansion of `my_case' results in expanding `AS_IF' with a truncated parameter, and the expansion is syntactically invalid: if :; then case $file_name in *.c fi echo "C source code";; esac) If nothing else, this should emphasize the importance of the quoting arguments to macro calls. On the other hand, there are several variations for defining `my_case' to be more robust, even when used without proper quoting, each with some benefits and some drawbacks. Creative literal shell comment AC_DEFUN([my_case], [case $file_name in #( *.c) echo "C source code";; esac]) This version provides balanced parentheses to several editors, and can be copied and pasted into a terminal as is. Unfortunately, it is still unbalanced as an Autoconf argument, since `#(' is an M4 comment that masks the normal properties of `('. Quadrigraph shell comment AC_DEFUN([my_case], [case $file_name in @%:@( *.c) echo "C source code";; esac]) This version provides balanced parentheses to even more editors, and can be used as a balanced Autoconf argument. Unfortunately, it requires some editing before it can be copied and pasted into a terminal, and the use of the quadrigraph `@%:@' for `#' reduces readability. Quoting just the parenthesis AC_DEFUN([my_case], [case $file_name in *.c[)] echo "C source code";; esac]) This version quotes the `)', so that it can be used as a balanced Autoconf argument. As written, this is not balanced to an editor, but it can be coupled with `[#(]' to meet that need, too. However, it still requires some edits before it can be copied and pasted into a terminal. Double-quoting the entire statement AC_DEFUN([my_case], [[case $file_name in #( *.c) echo "C source code";; esac]]) Since the entire macro is double-quoted, there is no problem with using this as an Autoconf argument; and since the double-quoting is over the entire statement, this code can be easily copied and pasted into a terminal. However, the double quoting prevents the expansion of any macros inside the case statement, which may cause its own set of problems. Using `AS_CASE' AC_DEFUN([my_case], [AS_CASE([$file_name], [*.c], [echo "C source code"])]) This version avoids the balancing issue altogether, by relying on `AS_CASE' (*note Common Shell Constructs::); it also allows for the expansion of `AC_REQUIRE' to occur prior to the entire case statement, rather than within a branch of the case statement that might not be taken. However, the abstraction comes with a penalty that it is no longer a quick copy, paste, and edit to get back to shell code.  File: autoconf.info, Node: Quotation Rule Of Thumb, Prev: Balancing Parentheses, Up: M4 Quotation 8.1.8 Quotation Rule Of Thumb ----------------------------- To conclude, the quotation rule of thumb is: _One pair of quotes per pair of parentheses._ Never over-quote, never under-quote, in particular in the definition of macros. In the few places where the macros need to use brackets (usually in C program text or regular expressions), properly quote _the arguments_! It is common to read Autoconf programs with snippets like: AC_TRY_LINK( changequote(<<, >>)dnl <<#include #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others reject char **tzname. */ #endif>>, changequote([, ])dnl [atoi (*tzname);], ac_cv_var_tzname=yes, ac_cv_var_tzname=no) which is incredibly useless since `AC_TRY_LINK' is _already_ double quoting, so you just need: AC_TRY_LINK( [#include #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others reject char **tzname. */ #endif], [atoi (*tzname);], [ac_cv_var_tzname=yes], [ac_cv_var_tzname=no]) The M4-fluent reader might note that these two examples are rigorously equivalent, since M4 swallows both the `changequote(<<, >>)' and `<<' `>>' when it "collects" the arguments: these quotes are not part of the arguments! Simplified, the example above is just doing this: changequote(<<, >>)dnl <<[]>> changequote([, ])dnl instead of simply: [[]] With macros that do not double quote their arguments (which is the rule), double-quote the (risky) literals: AC_LINK_IFELSE([AC_LANG_PROGRAM( [[#include #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others reject char **tzname. */ #endif]], [atoi (*tzname);])], [ac_cv_var_tzname=yes], [ac_cv_var_tzname=no]) Please note that the macro `AC_TRY_LINK' is obsolete, so you really should be using `AC_LINK_IFELSE' instead. *Note Quadrigraphs::, for what to do if you run into a hopeless case where quoting does not suffice. When you create a `configure' script using newly written macros, examine it carefully to check whether you need to add more quotes in your macros. If one or more words have disappeared in the M4 output, you need more quotes. When in doubt, quote. However, it's also possible to put on too many layers of quotes. If this happens, the resulting `configure' script may contain unexpanded macros. The `autoconf' program checks for this problem by looking for the string `AC_' in `configure'. However, this heuristic does not work in general: for example, it does not catch overquoting in `AC_DEFINE' descriptions.  File: autoconf.info, Node: Using autom4te, Next: Programming in M4sugar, Prev: M4 Quotation, Up: Programming in M4 8.2 Using `autom4te' ==================== The Autoconf suite, including M4sugar, M4sh, and Autotest, in addition to Autoconf per se, heavily rely on M4. All these different uses revealed common needs factored into a layer over M4: `autom4te'(1). `autom4te' is a preprocessor that is like `m4'. It supports M4 extensions designed for use in tools like Autoconf. * Menu: * autom4te Invocation:: A GNU M4 wrapper * Customizing autom4te:: Customizing the Autoconf package ---------- Footnotes ---------- (1) Yet another great name from Lars J. Aas.  File: autoconf.info, Node: autom4te Invocation, Next: Customizing autom4te, Up: Using autom4te 8.2.1 Invoking `autom4te' ------------------------- The command line arguments are modeled after M4's: autom4te OPTIONS FILES where the FILES are directly passed to `m4'. By default, GNU M4 is found during configuration, but the environment variable `M4' can be set to tell `autom4te' where to look. In addition to the regular expansion, it handles the replacement of the quadrigraphs (*note Quadrigraphs::), and of `__oline__', the current line in the output. It supports an extended syntax for the FILES: `FILE.m4f' This file is an M4 frozen file. Note that _all the previous files are ignored_. See the option `--melt' for the rationale. `FILE?' If found in the library path, the FILE is included for expansion, otherwise it is ignored instead of triggering a failure. Of course, it supports the Autoconf common subset of options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' `-v' Report processing steps. `--debug' `-d' Don't remove the temporary files and be even more verbose. `--include=DIR' `-I DIR' Also look for input files in DIR. Multiple invocations accumulate. `--output=FILE' `-o FILE' Save output (script or trace) to FILE. The file `-' stands for the standard output. As an extension of `m4', it includes the following options: `--warnings=CATEGORY' `-W CATEGORY' Report the warnings related to CATEGORY (which can actually be a comma separated list). *Note Reporting Messages::, macro `AC_DIAGNOSE', for a comprehensive list of categories. Special values include: `all' report all the warnings `none' report none `error' treats warnings as errors `no-CATEGORY' disable warnings falling into CATEGORY Warnings about `syntax' are enabled by default, and the environment variable `WARNINGS', a comma separated list of categories, is honored. `autom4te -W CATEGORY' actually behaves as if you had run: autom4te --warnings=syntax,$WARNINGS,CATEGORY For example, if you want to disable defaults and `WARNINGS' of `autom4te', but enable the warnings about obsolete constructs, you would use `-W none,obsolete'. `autom4te' displays a back trace for errors, but not for warnings; if you want them, just pass `-W error'. `--melt' `-M' Do not use frozen files. Any argument `FILE.m4f' is replaced by `FILE.m4'. This helps tracing the macros which are executed only when the files are frozen, typically `m4_define'. For instance, running: autom4te --melt 1.m4 2.m4f 3.m4 4.m4f input.m4 is roughly equivalent to running: m4 1.m4 2.m4 3.m4 4.m4 input.m4 while autom4te 1.m4 2.m4f 3.m4 4.m4f input.m4 is equivalent to: m4 --reload-state=4.m4f input.m4 `--freeze' `-F' Produce a frozen state file. `autom4te' freezing is stricter than M4's: it must produce no warnings, and no output other than empty lines (a line with white space is _not_ empty) and comments (starting with `#'). Unlike `m4''s similarly-named option, this option takes no argument: autom4te 1.m4 2.m4 3.m4 --freeze --output=3.m4f corresponds to m4 1.m4 2.m4 3.m4 --freeze-state=3.m4f `--mode=OCTAL-MODE' `-m OCTAL-MODE' Set the mode of the non-traces output to OCTAL-MODE; by default `0666'. As another additional feature over `m4', `autom4te' caches its results. GNU M4 is able to produce a regular output and traces at the same time. Traces are heavily used in the GNU Build System: `autoheader' uses them to build `config.h.in', `autoreconf' to determine what GNU Build System components are used, `automake' to "parse" `configure.ac' etc. To avoid recomputation, traces are cached while performing regular expansion, and conversely. This cache is (actually, the caches are) stored in the directory `autom4te.cache'. _It can safely be removed_ at any moment (especially if for some reason `autom4te' considers it trashed). `--cache=DIRECTORY' `-C DIRECTORY' Specify the name of the directory where the result should be cached. Passing an empty value disables caching. Be sure to pass a relative file name, as for the time being, global caches are not supported. `--no-cache' Don't cache the results. `--force' `-f' If a cache is used, consider it obsolete (but update it anyway). Because traces are so important to the GNU Build System, `autom4te' provides high level tracing features as compared to M4, and helps exploiting the cache: `--trace=MACRO[:FORMAT]' `-t MACRO[:FORMAT]' Trace the invocations of MACRO according to the FORMAT. Multiple `--trace' arguments can be used to list several macros. Multiple `--trace' arguments for a single macro are not cumulative; instead, you should just make FORMAT as long as needed. The FORMAT is a regular string, with newlines if desired, and several special escape codes. It defaults to `$f:$l:$n:$%'. It can use the following special escapes: `$$' The character `$'. `$f' The file name from which MACRO is called. `$l' The line number from which MACRO is called. `$d' The depth of the MACRO call. This is an M4 technical detail that you probably don't want to know about. `$n' The name of the MACRO. `$NUM' The NUMth argument of the call to MACRO. `$@' `$SEP@' `${SEPARATOR}@' All the arguments passed to MACRO, separated by the character SEP or the string SEPARATOR (`,' by default). Each argument is quoted, i.e., enclosed in a pair of square brackets. `$*' `$SEP*' `${SEPARATOR}*' As above, but the arguments are not quoted. `$%' `$SEP%' `${SEPARATOR}%' As above, but the arguments are not quoted, all new line characters in the arguments are smashed, and the default separator is `:'. The escape `$%' produces single-line trace outputs (unless you put newlines in the `separator'), while `$@' and `$*' do not. *Note autoconf Invocation::, for examples of trace uses. `--preselect=MACRO' `-p MACRO' Cache the traces of MACRO, but do not enable traces. This is especially important to save CPU cycles in the future. For instance, when invoked, `autoconf' preselects all the macros that `autoheader', `automake', `autoreconf', etc., trace, so that running `m4' is not needed to trace them: the cache suffices. This results in a huge speed-up. Finally, `autom4te' introduces the concept of "Autom4te libraries". They consists in a powerful yet extremely simple feature: sets of combined command line arguments: `--language=LANGUAGE' `-l LANGUAGE' Use the LANGUAGE Autom4te library. Current languages include: `M4sugar' create M4sugar output. `M4sh' create M4sh executable shell scripts. `Autotest' create Autotest executable test suites. `Autoconf-without-aclocal-m4' create Autoconf executable configure scripts without reading `aclocal.m4'. `Autoconf' create Autoconf executable configure scripts. This language inherits all the characteristics of `Autoconf-without-aclocal-m4' and additionally reads `aclocal.m4'. `--prepend-include=DIR' `-B DIR' Prepend directory DIR to the search path. This is used to include the language-specific files before any third-party macros. As an example, if Autoconf is installed in its default location, `/usr/local', the command `autom4te -l m4sugar foo.m4' is strictly equivalent to the command: autom4te --prepend-include /usr/local/share/autoconf \ m4sugar/m4sugar.m4f --warnings syntax foo.m4 Recursive expansion applies here: the command `autom4te -l m4sh foo.m4' is the same as `autom4te --language M4sugar m4sugar/m4sh.m4f foo.m4', i.e.: autom4te --prepend-include /usr/local/share/autoconf \ m4sugar/m4sugar.m4f m4sugar/m4sh.m4f --mode 777 foo.m4 The definition of the languages is stored in `autom4te.cfg'.  File: autoconf.info, Node: Customizing autom4te, Prev: autom4te Invocation, Up: Using autom4te 8.2.2 Customizing `autom4te' ---------------------------- One can customize `autom4te' via `~/.autom4te.cfg' (i.e., as found in the user home directory), and `./.autom4te.cfg' (i.e., as found in the directory from which `autom4te' is run). The order is first reading `autom4te.cfg', then `~/.autom4te.cfg', then `./.autom4te.cfg', and finally the command line arguments. In these text files, comments are introduced with `#', and empty lines are ignored. Customization is performed on a per-language basis, wrapped in between a `begin-language: "LANGUAGE"', `end-language: "LANGUAGE"' pair. Customizing a language stands for appending options (*note autom4te Invocation::) to the current definition of the language. Options, and more generally arguments, are introduced by `args: ARGUMENTS'. You may use the traditional shell syntax to quote the ARGUMENTS. As an example, to disable Autoconf caches (`autom4te.cache') globally, include the following lines in `~/.autom4te.cfg': ## ------------------ ## ## User Preferences. ## ## ------------------ ## begin-language: "Autoconf-without-aclocal-m4" args: --no-cache end-language: "Autoconf-without-aclocal-m4"  File: autoconf.info, Node: Programming in M4sugar, Next: Debugging via autom4te, Prev: Using autom4te, Up: Programming in M4 8.3 Programming in M4sugar ========================== M4 by itself provides only a small, but sufficient, set of all-purpose macros. M4sugar introduces additional generic macros. Its name was coined by Lars J. Aas: "Readability And Greater Understanding Stands 4 M4sugar". M4sugar reserves the macro namespace `^_m4_' for internal use, and the macro namespace `^m4_' for M4sugar macros. You should not define your own macros into these namespaces. * Menu: * Redefined M4 Macros:: M4 builtins changed in M4sugar * Diagnostic Macros:: Diagnostic messages from M4sugar * Diversion support:: Diversions in M4sugar * Conditional constructs:: Conditions in M4 * Looping constructs:: Iteration in M4 * Evaluation Macros:: More quotation and evaluation control * Text processing Macros:: String manipulation in M4 * Number processing Macros:: Arithmetic computation in M4 * Set manipulation Macros:: Set manipulation in M4 * Forbidden Patterns:: Catching unexpanded macros  File: autoconf.info, Node: Redefined M4 Macros, Next: Diagnostic Macros, Up: Programming in M4sugar 8.3.1 Redefined M4 Macros ------------------------- With a few exceptions, all the M4 native macros are moved in the `m4_' pseudo-namespace, e.g., M4sugar renames `define' as `m4_define' etc. The list of macros unchanged from M4, except for their name, is: - m4_builtin - m4_changecom - m4_changequote - m4_debugfile - m4_debugmode - m4_decr - m4_define - m4_divnum - m4_errprint - m4_esyscmd - m4_eval - m4_format - m4_ifdef - m4_incr - m4_index - m4_indir - m4_len - m4_pushdef - m4_shift - m4_substr - m4_syscmd - m4_sysval - m4_traceoff - m4_traceon - m4_translit Some M4 macros are redefined, and are slightly incompatible with their native equivalent. -- Macro: __file__ -- Macro: __line__ All M4 macros starting with `__' retain their original name: for example, no `m4__file__' is defined. -- Macro: __oline__ This is not technically a macro, but a feature of Autom4te. The sequence `__oline__' can be used similarly to the other m4sugar location macros, but rather than expanding to the location of the input file, it is translated to the line number where it appears in the output file after all other M4 expansions. -- Macro: dnl This macro kept its original name: no `m4_dnl' is defined. -- Macro: m4_bpatsubst (STRING, REGEXP, [REPLACEMENT]) This macro corresponds to `patsubst'. The name `m4_patsubst' is kept for future versions of M4sugar, once GNU M4 2.0 is released and supports extended regular expression syntax. -- Macro: m4_bregexp (STRING, REGEXP, [REPLACEMENT]) This macro corresponds to `regexp'. The name `m4_regexp' is kept for future versions of M4sugar, once GNU M4 2.0 is released and supports extended regular expression syntax. -- Macro: m4_copy (SOURCE, DEST) -- Macro: m4_copy_force (SOURCE, DEST) -- Macro: m4_rename (SOURCE, DEST) -- Macro: m4_rename_force (SOURCE, DEST) These macros aren't directly builtins, but are closely related to `m4_pushdef' and `m4_defn'. `m4_copy' and `m4_rename' ensure that DEST is undefined, while `m4_copy_force' and `m4_rename_force' overwrite any existing definition. All four macros then proceed to copy the entire pushdef stack of definitions of SOURCE over to DEST. `m4_copy' and `m4_copy_force' preserve the source (including in the special case where SOURCE is undefined), while `m4_rename' and `m4_rename_force' undefine the original macro name (making it an error to rename an undefined SOURCE). Note that attempting to invoke a renamed macro might not work, since the macro may have a dependence on helper macros accessed via composition of `$0' but that were not also renamed; likewise, other macros may have a hard-coded dependence on SOURCE and could break if SOURCE has been deleted. On the other hand, it is always safe to rename a macro to temporarily move it out of the way, then rename it back later to restore original semantics. -- Macro: m4_defn (MACRO...) This macro fails if MACRO is not defined, even when using older versions of M4 that did not warn. See `m4_undefine'. Unfortunately, in order to support these older versions of M4, there are some situations involving unbalanced quotes where concatenating multiple macros together will work in newer M4 but not in m4sugar; use quadrigraphs to work around this. -- Macro: m4_divert (DIVERSION) M4sugar relies heavily on diversions, so rather than behaving as a primitive, `m4_divert' behaves like: m4_divert_pop()m4_divert_push([DIVERSION]) *Note Diversion support::, for more details about the use of the diversion stack. In particular, this implies that DIVERSION should be a named diversion rather than a raw number. But be aware that it is seldom necessary to explicitly change the diversion stack, and that when done incorrectly, it can lead to syntactically invalid scripts. -- Macro: m4_dumpdef (NAME...) -- Macro: m4_dumpdefs (NAME...) `m4_dumpdef' is like the M4 builtin, except that this version requires at least one argument, output always goes to standard error rather than the current debug file, no sorting is done on multiple arguments, and an error is issued if any NAME is undefined. `m4_dumpdefs' is a convenience macro that calls `m4_dumpdef' for all of the `m4_pushdef' stack of definitions, starting with the current, and silently does nothing if NAME is undefined. Unfortunately, due to a limitation in M4 1.4.x, any macro defined as a builtin is output as the empty string. This behavior is rectified by using M4 1.6 or newer. However, this behavior difference means that `m4_dumpdef' should only be used while developing m4sugar macros, and never in the final published form of a macro. -- Macro: m4_esyscmd_s (COMMAND) Like `m4_esyscmd', this macro expands to the result of running COMMAND in a shell. The difference is that any trailing newlines are removed, so that the output behaves more like shell command substitution. -- Macro: m4_exit (EXIT-STATUS) This macro corresponds to `m4exit'. -- Macro: m4_if (COMMENT) -- Macro: m4_if (STRING-1, STRING-2, EQUAL, [NOT-EQUAL]) -- Macro: m4_if (STRING-1, STRING-2, EQUAL-1, STRING-3, STRING-4, EQUAL-2, ..., [NOT-EQUAL]) This macro corresponds to `ifelse'. STRING-1 and STRING-2 are compared literally, so usually one of the two arguments is passed unquoted. *Note Conditional constructs::, for more conditional idioms. -- Macro: m4_include (FILE) -- Macro: m4_sinclude (FILE) Like the M4 builtins, but warn against multiple inclusions of FILE. -- Macro: m4_mkstemp (TEMPLATE) -- Macro: m4_maketemp (TEMPLATE) Posix requires `maketemp' to replace the trailing `X' characters in TEMPLATE with the process id, without regards to the existence of a file by that name, but this a security hole. When this was pointed out to the Posix folks, they agreed to invent a new macro `mkstemp' that always creates a uniquely named file, but not all versions of GNU M4 support the new macro. In M4sugar, `m4_maketemp' and `m4_mkstemp' are synonyms for each other, and both have the secure semantics regardless of which macro the underlying M4 provides. -- Macro: m4_popdef (MACRO...) This macro fails if MACRO is not defined, even when using older versions of M4 that did not warn. See `m4_undefine'. -- Macro: m4_undefine (MACRO...) This macro fails if MACRO is not defined, even when using older versions of M4 that did not warn. Use m4_ifdef([MACRO], [m4_undefine([MACRO])]) if you are not sure whether MACRO is defined. -- Macro: m4_undivert (DIVERSION...) Unlike the M4 builtin, at least one DIVERSION must be specified. Also, since the M4sugar diversion stack prefers named diversions, the use of `m4_undivert' to include files is risky. *Note Diversion support::, for more details about the use of the diversion stack. But be aware that it is seldom necessary to explicitly change the diversion stack, and that when done incorrectly, it can lead to syntactically invalid scripts. -- Macro: m4_wrap (TEXT) -- Macro: m4_wrap_lifo (TEXT) These macros correspond to `m4wrap'. Posix requires arguments of multiple wrap calls to be reprocessed at EOF in the same order as the original calls (first-in, first-out). GNU M4 versions through 1.4.10, however, reprocess them in reverse order (last-in, first-out). Both orders are useful, therefore, you can rely on `m4_wrap' to provide FIFO semantics and `m4_wrap_lifo' for LIFO semantics, regardless of the underlying GNU M4 version. Unlike the GNU M4 builtin, these macros only recognize one argument, and avoid token pasting between consecutive invocations. On the other hand, nested calls to `m4_wrap' from within wrapped text work just as in the builtin.  File: autoconf.info, Node: Diagnostic Macros, Next: Diversion support, Prev: Redefined M4 Macros, Up: Programming in M4sugar 8.3.2 Diagnostic messages from M4sugar -------------------------------------- When macros statically diagnose abnormal situations, benign or fatal, they should report them using these macros. For issuing dynamic issues, i.e., when `configure' is run, see *note Printing Messages::. -- Macro: m4_assert (EXPRESSION, [EXIT-STATUS = `1']) Assert that the arithmetic EXPRESSION evaluates to non-zero. Otherwise, issue a fatal error, and exit `autom4te' with EXIT-STATUS. -- Macro: m4_errprintn (MESSAGE) Similar to the builtin `m4_errprint', except that a newline is guaranteed after MESSAGE. -- Macro: m4_fatal (MESSAGE) Report a severe error MESSAGE prefixed with the current location, and have `autom4te' die. -- Macro: m4_location Useful as a prefix in a message line. Short for: __file__:__line__ -- Macro: m4_warn (CATEGORY, MESSAGE) Report MESSAGE as a warning (or as an error if requested by the user) if warnings of the CATEGORY are turned on. If the message is emitted, it is prefixed with the current location, and followed by a call trace of all macros defined via `AC_DEFUN' used to get to the current expansion. You are encouraged to use standard categories, which currently include: `all' messages that don't fall into one of the following categories. Use of an empty CATEGORY is equivalent. `cross' related to cross compilation issues. `obsolete' use of an obsolete construct. `syntax' dubious syntactic constructs, incorrectly ordered macro calls.  File: autoconf.info, Node: Diversion support, Next: Conditional constructs, Prev: Diagnostic Macros, Up: Programming in M4sugar 8.3.3 Diversion support ----------------------- M4sugar makes heavy use of diversions under the hood, because it is often the case that text that must appear early in the output is not discovered until late in the input. Additionally, some of the topological sorting algorithms used in resolving macro dependencies use diversions. However, most macros should not need to change diversions directly, but rather rely on higher-level M4sugar macros to manage diversions transparently. If you change diversions improperly, you risk generating a syntactically invalid script, because an incorrect diversion will violate assumptions made by many macros about whether prerequisite text has been previously output. In short, if you manually change the diversion, you should not expect any macros provided by the Autoconf package to work until you have restored the diversion stack back to its original state. In the rare case that it is necessary to write a macro that explicitly outputs text to a different diversion, it is important to be aware of an M4 limitation regarding diversions: text only goes to a diversion if it is not part of argument collection. Therefore, any macro that changes the current diversion cannot be used as an unquoted argument to another macro, but must be expanded at the top level. The macro `m4_expand' will diagnose any attempt to change diversions, since it is generally useful only as an argument to another macro. The following example shows what happens when diversion manipulation is attempted within macro arguments: m4_do([normal text] m4_divert_push([KILL])unwanted[]m4_divert_pop([KILL]) [m4_divert_push([KILL])discarded[]m4_divert_pop([KILL])])dnl =>normal text =>unwanted Notice that the unquoted text `unwanted' is output, even though it was processed while the current diversion was `KILL', because it was collected as part of the argument to `m4_do'. However, the text `discarded' disappeared as desired, because the diversion changes were single-quoted, and were not expanded until the top-level rescan of the output of `m4_do'. To make diversion management easier, M4sugar uses the concept of named diversions. Rather than using diversion numbers directly, it is nicer to associate a name with each diversion. The diversion number associated with a particular diversion name is an implementation detail, and a syntax warning is issued if a diversion number is used instead of a name. In general, you should not output text to a named diversion until after calling the appropriate initialization routine for your language (`m4_init', `AS_INIT', `AT_INIT', ...), although there are some exceptions documented below. M4sugar defines two named diversions. `KILL' Text written to this diversion is discarded. This is the default diversion once M4sugar is initialized. `GROW' This diversion is used behind the scenes by topological sorting macros, such as `AC_REQUIRE'. M4sh adds several more named diversions. `BINSH' This diversion is reserved for the `#!' interpreter line. `HEADER-REVISION' This diversion holds text from `AC_REVISION'. `HEADER-COMMENT' This diversion holds comments about the purpose of a file. `HEADER-COPYRIGHT' This diversion is managed by `AC_COPYRIGHT'. `M4SH-SANITIZE' This diversion contains M4sh sanitization code, used to ensure M4sh is executing in a reasonable shell environment. `M4SH-INIT' This diversion contains M4sh initialization code, initializing variables that are required by other M4sh macros. `BODY' This diversion contains the body of the shell code, and is the default diversion once M4sh is initialized. Autotest inherits diversions from M4sh, and changes the default diversion from `BODY' back to `KILL'. It also adds several more named diversions, with the following subset designed for developer use. `PREPARE_TESTS' This diversion contains initialization sequences which are executed after `atconfig' and `atlocal', and after all command line arguments have been parsed, but prior to running any tests. It can be used to set up state that is required across all tests. This diversion will work even before `AT_INIT'. Autoconf inherits diversions from M4sh, and adds the following named diversions which developers can utilize. `DEFAULTS' This diversion contains shell variable assignments to set defaults that must be in place before arguments are parsed. This diversion is placed early enough in `configure' that it is unsafe to expand any autoconf macros into this diversion. `HELP_ENABLE' If `AC_PRESERVE_HELP_ORDER' was used, then text placed in this diversion will be included as part of a quoted here-doc providing all of the `--help' output of `configure' related to options created by `AC_ARG_WITH' and `AC_ARG_ENABLE'. `INIT_PREPARE' This diversion occurs after all command line options have been parsed, but prior to the main body of the `configure' script. This diversion is the last chance to insert shell code such as variable assignments or shell function declarations that will used by the expansion of other macros. For now, the remaining named diversions of Autoconf, Autoheader, and Autotest are not documented. In other words, intentionally outputting text into an undocumented diversion is subject to breakage in a future release of Autoconf. -- Macro: m4_cleardivert (DIVERSION...) Permanently discard any text that has been diverted into DIVERSION. -- Macro: m4_divert_once (DIVERSION, [CONTENT]) Similar to `m4_divert_text', except that CONTENT is only output to DIVERSION if this is the first time that `m4_divert_once' has been called with its particular arguments. -- Macro: m4_divert_pop ([DIVERSION]) If provided, check that the current diversion is indeed DIVERSION. Then change to the diversion located earlier on the stack, giving an error if an attempt is made to pop beyond the initial m4sugar diversion of `KILL'. -- Macro: m4_divert_push (DIVERSION) Remember the former diversion on the diversion stack, and output subsequent text into DIVERSION. M4sugar maintains a diversion stack, and issues an error if there is not a matching pop for every push. -- Macro: m4_divert_text (DIVERSION, [CONTENT]) Output CONTENT and a newline into DIVERSION, without affecting the current diversion. Shorthand for: m4_divert_push([DIVERSION])CONTENT m4_divert_pop([DIVERSION])dnl One use of `m4_divert_text' is to develop two related macros, where macro `MY_A' does the work, but adjusts what work is performed based on whether the optional macro `MY_B' has also been expanded. Of course, it is possible to use `AC_BEFORE' within `MY_A' to require that `MY_B' occurs first, if it occurs at all. But this imposes an ordering restriction on the user; it would be nicer if macros `MY_A' and `MY_B' can be invoked in either order. The trick is to let `MY_B' leave a breadcrumb in an early diversion, which `MY_A' can then use to determine whether `MY_B' has been expanded. AC_DEFUN([MY_A], [# various actions if test -n "$b_was_used"; then # extra action fi]) AC_DEFUN([MY_B], [AC_REQUIRE([MY_A])dnl m4_divert_text([INIT_PREPARE], [b_was_used=true])]) -- Macro: m4_init Initialize the M4sugar environment, setting up the default named diversion to be `KILL'.  File: autoconf.info, Node: Conditional constructs, Next: Looping constructs, Prev: Diversion support, Up: Programming in M4sugar 8.3.4 Conditional constructs ---------------------------- The following macros provide additional conditional constructs as convenience wrappers around `m4_if'. -- Macro: m4_bmatch (STRING, REGEX-1, VALUE-1, [REGEX-2], [VALUE-2], ..., [DEFAULT]) The string STRING is repeatedly compared against a series of REGEX arguments; if a match is found, the expansion is the corresponding VALUE, otherwise, the macro moves on to the next REGEX. If no REGEX match, then the result is the optional DEFAULT, or nothing. -- Macro: m4_bpatsubsts (STRING, REGEX-1, SUBST-1, [REGEX-2], [SUBST-2], ...) The string STRING is altered by REGEX-1 and SUBST-1, as if by: m4_bpatsubst([[STRING]], [REGEX], [SUBST]) The result of the substitution is then passed through the next set of REGEX and SUBST, and so forth. An empty SUBST implies deletion of any matched portions in the current string. Note that this macro over-quotes STRING; this behavior is intentional, so that the result of each step of the recursion remains as a quoted string. However, it means that anchors (`^' and `$' in the REGEX will line up with the extra quotations, and not the characters of the original string. The overquoting is removed after the final substitution. -- Macro: m4_case (STRING, VALUE-1, IF-VALUE-1, [VALUE-2], [IF-VALUE-2], ..., [DEFAULT]) Test STRING against multiple VALUE possibilities, resulting in the first IF-VALUE for a match, or in the optional DEFAULT. This is shorthand for: m4_if([STRING], [VALUE-1], [IF-VALUE-1], [STRING], [VALUE-2], [IF-VALUE-2], ..., [DEFAULT]) -- Macro: m4_cond (TEST-1, VALUE-1, IF-VALUE-1, [TEST-2], [VALUE-2], [IF-VALUE-2], ..., [DEFAULT]) This macro was introduced in Autoconf 2.62. Similar to `m4_if', except that each TEST is expanded only when it is encountered. This is useful for short-circuiting expensive tests; while `m4_if' requires all its strings to be expanded up front before doing comparisons, `m4_cond' only expands a TEST when all earlier tests have failed. For an example, these two sequences give the same result, but in the case where `$1' does not contain a backslash, the `m4_cond' version only expands `m4_index' once, instead of five times, for faster computation if this is a common case for `$1'. Notice that every third argument is unquoted for `m4_if', and quoted for `m4_cond': m4_if(m4_index([$1], [\]), [-1], [$2], m4_eval(m4_index([$1], [\\]) >= 0), [1], [$2], m4_eval(m4_index([$1], [\$]) >= 0), [1], [$2], m4_eval(m4_index([$1], [\`]) >= 0), [1], [$3], m4_eval(m4_index([$1], [\"]) >= 0), [1], [$3], [$2]) m4_cond([m4_index([$1], [\])], [-1], [$2], [m4_eval(m4_index([$1], [\\]) >= 0)], [1], [$2], [m4_eval(m4_index([$1], [\$]) >= 0)], [1], [$2], [m4_eval(m4_index([$1], [\`]) >= 0)], [1], [$3], [m4_eval(m4_index([$1], [\"]) >= 0)], [1], [$3], [$2]) -- Macro: m4_default (EXPR-1, EXPR-2) -- Macro: m4_default_quoted (EXPR-1, EXPR-2) -- Macro: m4_default_nblank (EXPR-1, [EXPR-2]) -- Macro: m4_default_nblank_quoted (EXPR-1, [EXPR-2]) If EXPR-1 contains text, use it. Otherwise, select EXPR-2. `m4_default' expands the result, while `m4_default_quoted' does not. Useful for providing a fixed default if the expression that results in EXPR-1 would otherwise be empty. The difference between `m4_default' and `m4_default_nblank' is whether an argument consisting of just blanks (space, tab, newline) is significant. When using the expanding versions, note that an argument may contain text but still expand to an empty string. m4_define([active], [ACTIVE])dnl m4_define([empty], [])dnl m4_define([demo1], [m4_default([$1], [$2])])dnl m4_define([demo2], [m4_default_quoted([$1], [$2])])dnl m4_define([demo3], [m4_default_nblank([$1], [$2])])dnl m4_define([demo4], [m4_default_nblank_quoted([$1], [$2])])dnl demo1([active], [default]) =>ACTIVE demo1([], [active]) =>ACTIVE demo1([empty], [text]) => -demo1([ ], [active])- =>- - demo2([active], [default]) =>active demo2([], [active]) =>active demo2([empty], [text]) =>empty -demo2([ ], [active])- =>- - demo3([active], [default]) =>ACTIVE demo3([], [active]) =>ACTIVE demo3([empty], [text]) => -demo3([ ], [active])- =>-ACTIVE- demo4([active], [default]) =>active demo4([], [active]) =>active demo4([empty], [text]) =>empty -demo4([ ], [active])- =>-active- -- Macro: m4_define_default (MACRO, [DEFAULT-DEFINITION]) If MACRO does not already have a definition, then define it to DEFAULT-DEFINITION. -- Macro: m4_ifblank (COND, [IF-BLANK], [IF-TEXT]) -- Macro: m4_ifnblank (COND, [IF-TEXT], [IF-BLANK]) If COND is empty or consists only of blanks (space, tab, newline), then expand IF-BLANK; otherwise, expand IF-TEXT. Two variants exist, in order to make it easier to select the correct logical sense when using only two parameters. Note that this is more efficient than the equivalent behavior of: m4_ifval(m4_normalize([COND]), IF-TEXT, IF-BLANK) -- Macro: m4_ifndef (MACRO, IF-NOT-DEFINED, [IF-DEFINED]) This is shorthand for: m4_ifdef([MACRO], [IF-DEFINED], [IF-NOT-DEFINED]) -- Macro: m4_ifset (MACRO, [IF-TRUE], [IF-FALSE]) If MACRO is undefined, or is defined as the empty string, expand to IF-FALSE. Otherwise, expands to IF-TRUE. Similar to: m4_ifval(m4_defn([MACRO]), [IF-TRUE], [IF-FALSE]) except that it is not an error if MACRO is undefined. -- Macro: m4_ifval (COND, [IF-TRUE], [IF-FALSE]) Expands to IF-TRUE if COND is not empty, otherwise to IF-FALSE. This is shorthand for: m4_if([COND], [], [IF-FALSE], [IF-TRUE]) -- Macro: m4_ifvaln (COND, [IF-TRUE], [IF-FALSE]) Similar to `m4_ifval', except guarantee that a newline is present after any non-empty expansion. Often followed by `dnl'. -- Macro: m4_n (TEXT) Expand to TEXT, and add a newline if TEXT is not empty. Often followed by `dnl'.  File: autoconf.info, Node: Looping constructs, Next: Evaluation Macros, Prev: Conditional constructs, Up: Programming in M4sugar 8.3.5 Looping constructs ------------------------ The following macros are useful in implementing recursive algorithms in M4, including loop operations. An M4 list is formed by quoting a list of quoted elements; generally the lists are comma-separated, although `m4_foreach_w' is whitespace-separated. For example, the list `[[a], [b,c]]' contains two elements: `[a]' and `[b,c]'. It is common to see lists with unquoted elements when those elements are not likely to be macro names, as in `[fputc_unlocked, fgetc_unlocked]'. Although not generally recommended, it is possible for quoted lists to have side effects; all side effects are expanded only once, and prior to visiting any list element. On the other hand, the fact that unquoted macros are expanded exactly once means that macros without side effects can be used to generate lists. For example, m4_foreach([i], [[1], [2], [3]m4_errprintn([hi])], [i]) error-->hi =>123 m4_define([list], [[1], [2], [3]]) => m4_foreach([i], [list], [i]) =>123 -- Macro: m4_argn (N, [ARG]...) Extracts argument N (larger than 0) from the remaining arguments. If there are too few arguments, the empty string is used. For any N besides 1, this is more efficient than the similar `m4_car(m4_shiftn([N], [], [ARG...]))'. -- Macro: m4_car (ARG...) Expands to the quoted first ARG. Can be used with `m4_cdr' to recursively iterate through a list. Generally, when using quoted lists of quoted elements, `m4_car' should be called without any extra quotes. -- Macro: m4_cdr (ARG...) Expands to a quoted list of all but the first ARG, or the empty string if there was only one argument. Generally, when using quoted lists of quoted elements, `m4_cdr' should be called without any extra quotes. For example, this is a simple implementation of `m4_map'; note how each iteration checks for the end of recursion, then merely applies the first argument to the first element of the list, then repeats with the rest of the list. (The actual implementation in M4sugar is a bit more involved, to gain some speed and share code with `m4_map_sep', and also to avoid expanding side effects in `$2' twice). m4_define([m4_map], [m4_ifval([$2], [m4_apply([$1], m4_car($2))[]$0([$1], m4_cdr($2))])])dnl m4_map([ m4_eval], [[[1]], [[1+1]], [[10],[16]]]) => 1 2 a -- Macro: m4_for (VAR, FIRST, LAST, [STEP], EXPRESSION) Loop over the numeric values between FIRST and LAST including bounds by increments of STEP. For each iteration, expand EXPRESSION with the numeric value assigned to VAR. If STEP is omitted, it defaults to `1' or `-1' depending on the order of the limits. If given, STEP has to match this order. The number of iterations is determined independently from definition of VAR; iteration cannot be short-circuited or lengthened by modifying VAR from within EXPRESSION. -- Macro: m4_foreach (VAR, LIST, EXPRESSION) Loop over the comma-separated M4 list LIST, assigning each value to VAR, and expand EXPRESSION. The following example outputs two lines: m4_foreach([myvar], [[foo], [bar, baz]], [echo myvar ])dnl =>echo foo =>echo bar, baz Note that for some forms of EXPRESSION, it may be faster to use `m4_map_args'. -- Macro: m4_foreach_w (VAR, LIST, EXPRESSION) Loop over the white-space-separated list LIST, assigning each value to VAR, and expand EXPRESSION. If VAR is only referenced once in EXPRESSION, it is more efficient to use `m4_map_args_w'. The deprecated macro `AC_FOREACH' is an alias of `m4_foreach_w'. -- Macro: m4_map (MACRO, LIST) -- Macro: m4_mapall (MACRO, LIST) -- Macro: m4_map_sep (MACRO, SEPARATOR, LIST) -- Macro: m4_mapall_sep (MACRO, SEPARATOR, LIST) Loop over the comma separated quoted list of argument descriptions in LIST, and invoke MACRO with the arguments. An argument description is in turn a comma-separated quoted list of quoted elements, suitable for `m4_apply'. The macros `m4_map' and `m4_map_sep' ignore empty argument descriptions, while `m4_mapall' and `m4_mapall_sep' invoke MACRO with no arguments. The macros `m4_map_sep' and `m4_mapall_sep' additionally expand SEPARATOR between invocations of MACRO. Note that SEPARATOR is expanded, unlike in `m4_join'. When separating output with commas, this means that the map result can be used as a series of arguments, by using a single-quoted comma as SEPARATOR, or as a single string, by using a double-quoted comma. m4_map([m4_count], []) => m4_map([ m4_count], [[], [[1]], [[1], [2]]]) => 1 2 m4_mapall([ m4_count], [[], [[1]], [[1], [2]]]) => 0 1 2 m4_map_sep([m4_eval], [,], [[[1+2]], [[10], [16]]]) =>3,a m4_map_sep([m4_echo], [,], [[[a]], [[b]]]) =>a,b m4_count(m4_map_sep([m4_echo], [,], [[[a]], [[b]]])) =>2 m4_map_sep([m4_echo], [[,]], [[[a]], [[b]]]) =>a,b m4_count(m4_map_sep([m4_echo], [[,]], [[[a]], [[b]]])) =>1 -- Macro: m4_map_args (MACRO, ARG...) Repeatedly invoke MACRO with each successive ARG as its only argument. In the following example, three solutions are presented with the same expansion; the solution using `m4_map_args' is the most efficient. m4_define([active], [ACTIVE])dnl m4_foreach([var], [[plain], [active]], [ m4_echo(m4_defn([var]))]) => plain active m4_map([ m4_echo], [[[plain]], [[active]]]) => plain active m4_map_args([ m4_echo], [plain], [active]) => plain active In cases where it is useful to operate on additional parameters besides the list elements, the macro `m4_curry' can be used in MACRO to supply the argument currying necessary to generate the desired argument list. In the following example, `list_add_n' is more efficient than `list_add_x'. On the other hand, using `m4_map_args_sep' can be even more efficient. m4_define([list], [[1], [2], [3]])dnl m4_define([add], [m4_eval(([$1]) + ([$2]))])dnl dnl list_add_n(N, ARG...) dnl Output a list consisting of each ARG added to N m4_define([list_add_n], [m4_shift(m4_map_args([,m4_curry([add], [$1])], m4_shift($@)))])dnl list_add_n([1], list) =>2,3,4 list_add_n([2], list) =>3,4,5 m4_define([list_add_x], [m4_shift(m4_foreach([var], m4_dquote(m4_shift($@)), [,add([$1],m4_defn([var]))]))])dnl list_add_x([1], list) =>2,3,4 -- Macro: m4_map_args_pair (MACRO, [MACRO-END = `macro'], ARG...) For every pair of arguments ARG, invoke MACRO with two arguments. If there is an odd number of arguments, invoke MACRO-END, which defaults to MACRO, with the remaining argument. m4_map_args_pair([, m4_reverse], [], [1], [2], [3]) =>, 2, 1, 3 m4_map_args_pair([, m4_reverse], [, m4_dquote], [1], [2], [3]) =>, 2, 1, [3] m4_map_args_pair([, m4_reverse], [, m4_dquote], [1], [2], [3], [4]) =>, 2, 1, 4, 3 -- Macro: m4_map_args_sep ([PRE], [POST], [SEP], ARG...) Expand the sequence `PRE[ARG]POST' for each argument, additionally expanding SEP between arguments. One common use of this macro is constructing a macro call, where the opening and closing parentheses are split between PRE and POST; in particular, `m4_map_args([MACRO], [ARG])' is equivalent to `m4_map_args_sep([MACRO(], [)], [], [ARG])'. This macro provides the most efficient means for iterating over an arbitrary list of arguments, particularly when repeatedly constructing a macro call with more arguments than ARG. -- Macro: m4_map_args_w (STRING, [PRE], [POST], [SEP]) Expand the sequence `PRE[word]POST' for each word in the whitespace-separated STRING, additionally expanding SEP between words. This macro provides the most efficient means for iterating over a whitespace-separated string. In particular, `m4_map_args_w([STRING], [ACTION(], [)])' is more efficient than `m4_foreach_w([var], [STRING], [ACTION(m4_defn([var]))])'. -- Macro: m4_shiftn (COUNT, ...) -- Macro: m4_shift2 (...) -- Macro: m4_shift3 (...) `m4_shiftn' performs COUNT iterations of `m4_shift', along with validation that enough arguments were passed in to match the shift count, and that the count is positive. `m4_shift2' and `m4_shift3' are specializations of `m4_shiftn', introduced in Autoconf 2.62, and are more efficient for two and three shifts, respectively. -- Macro: m4_stack_foreach (MACRO, ACTION) -- Macro: m4_stack_foreach_lifo (MACRO, ACTION) For each of the `m4_pushdef' definitions of MACRO, expand ACTION with the single argument of a definition of MACRO. `m4_stack_foreach' starts with the oldest definition, while `m4_stack_foreach_lifo' starts with the current definition. ACTION should not push or pop definitions of MACRO, nor is there any guarantee that the current definition of MACRO matches the argument that was passed to ACTION. The macro `m4_curry' can be used if ACTION needs more than one argument, although in that case it is more efficient to use M4_STACK_FOREACH_SEP. Due to technical limitations, there are a few low-level m4sugar functions, such as `m4_pushdef', that cannot be used as the MACRO argument. m4_pushdef([a], [1])m4_pushdef([a], [2])dnl m4_stack_foreach([a], [ m4_incr]) => 2 3 m4_stack_foreach_lifo([a], [ m4_curry([m4_substr], [abcd])]) => cd bcd -- Macro: m4_stack_foreach_sep (MACRO, [PRE], [POST], [SEP]) -- Macro: m4_stack_foreach_sep_lifo (MACRO, [PRE], [POST], [SEP]) Expand the sequence `PRE[definition]POST' for each `m4_pushdef' definition of MACRO, additionally expanding SEP between definitions. `m4_stack_foreach_sep' visits the oldest definition first, while `m4_stack_foreach_sep_lifo' visits the current definition first. This macro provides the most efficient means for iterating over a pushdef stack. In particular, `m4_stack_foreach([MACRO], [ACTION])' is short for `m4_stack_foreach_sep([MACRO], [ACTION(], [)])'.  File: autoconf.info, Node: Evaluation Macros, Next: Text processing Macros, Prev: Looping constructs, Up: Programming in M4sugar 8.3.6 Evaluation Macros ----------------------- The following macros give some control over the order of the evaluation by adding or removing levels of quotes. -- Macro: m4_apply (MACRO, LIST) Apply the elements of the quoted, comma-separated LIST as the arguments to MACRO. If LIST is empty, invoke MACRO without arguments. Note the difference between `m4_indir', which expects its first argument to be a macro name but can use names that are otherwise invalid, and `m4_apply', where MACRO can contain other text, but must end in a valid macro name. m4_apply([m4_count], []) =>0 m4_apply([m4_count], [[]]) =>1 m4_apply([m4_count], [[1], [2]]) =>2 m4_apply([m4_join], [[|], [1], [2]]) =>1|2 -- Macro: m4_count (ARG, ...) This macro returns the decimal count of the number of arguments it was passed. -- Macro: m4_curry (MACRO, ARG...) This macro performs argument currying. The expansion of this macro is another macro name that expects exactly one argument; that argument is then appended to the ARG list, and then MACRO is expanded with the resulting argument list. m4_curry([m4_curry], [m4_reverse], [1])([2])([3]) =>3, 2, 1 Unfortunately, due to a limitation in M4 1.4.x, it is not possible to pass the definition of a builtin macro as the argument to the output of `m4_curry'; the empty string is used instead of the builtin token. This behavior is rectified by using M4 1.6 or newer. -- Macro: m4_do (ARG, ...) This macro loops over its arguments and expands each ARG in sequence. Its main use is for readability; it allows the use of indentation and fewer `dnl' to result in the same expansion. This macro guarantees that no expansion will be concatenated with subsequent text; to achieve full concatenation, use `m4_unquote(m4_join([], ARG...))'. m4_define([ab],[1])m4_define([bc],[2])m4_define([abc],[3])dnl m4_do([a],[b])c =>abc m4_unquote(m4_join([],[a],[b]))c =>3 m4_define([a],[A])m4_define([b],[B])m4_define([c],[C])dnl m4_define([AB],[4])m4_define([BC],[5])m4_define([ABC],[6])dnl m4_do([a],[b])c =>ABC m4_unquote(m4_join([],[a],[b]))c =>3 -- Macro: m4_dquote (ARG, ...) Return the arguments as a quoted list of quoted arguments. Conveniently, if there is just one ARG, this effectively adds a level of quoting. -- Macro: m4_dquote_elt (ARG, ...) Return the arguments as a series of double-quoted arguments. Whereas `m4_dquote' returns a single argument, `m4_dquote_elt' returns as many arguments as it was passed. -- Macro: m4_echo (ARG, ...) Return the arguments, with the same level of quoting. Other than discarding whitespace after unquoted commas, this macro is a no-op. -- Macro: m4_expand (ARG) Return the expansion of ARG as a quoted string. Whereas `m4_quote' is designed to collect expanded text into a single argument, `m4_expand' is designed to perform one level of expansion on quoted text. One distinction is in the treatment of whitespace following a comma in the original ARG. Any time multiple arguments are collected into one with `m4_quote', the M4 argument collection rules discard the whitespace. However, with `m4_expand', whitespace is preserved, even after the expansion of macros contained in ARG. Additionally, `m4_expand' is able to expand text that would involve an unterminated comment, whereas expanding that same text as the argument to `m4_quote' runs into difficulty in finding the end of the argument. Since manipulating diversions during argument collection is inherently unsafe, `m4_expand' issues an error if ARG attempts to change the current diversion (*note Diversion support::). m4_define([active], [ACT, IVE])dnl m4_define([active2], [[ACT, IVE]])dnl m4_quote(active, active) =>ACT,IVE,ACT,IVE m4_expand([active, active]) =>ACT, IVE, ACT, IVE m4_quote(active2, active2) =>ACT, IVE,ACT, IVE m4_expand([active2, active2]) =>ACT, IVE, ACT, IVE m4_expand([# m4_echo]) =># m4_echo m4_quote(# m4_echo) ) =># m4_echo) => Note that `m4_expand' cannot handle an ARG that expands to literal unbalanced quotes, but that quadrigraphs can be used when unbalanced output is necessary. Likewise, unbalanced parentheses should be supplied with double quoting or a quadrigraph. m4_define([pattern], [[!@<:@]])dnl m4_define([bar], [BAR])dnl m4_expand([case $foo in m4_defn([pattern])@:}@ bar ;; *[)] blah ;; esac]) =>case $foo in => [![]) BAR ;; => *) blah ;; =>esac -- Macro: m4_ignore (...) This macro was introduced in Autoconf 2.62. Expands to nothing, ignoring all of its arguments. By itself, this isn't very useful. However, it can be used to conditionally ignore an arbitrary number of arguments, by deciding which macro name to apply to a list of arguments. dnl foo outputs a message only if [debug] is defined. m4_define([foo], [m4_ifdef([debug],[AC_MSG_NOTICE],[m4_ignore])([debug message])]) Note that for earlier versions of Autoconf, the macro `__gnu__' can serve the same purpose, although it is less readable. -- Macro: m4_make_list (ARG, ...) This macro exists to aid debugging of M4sugar algorithms. Its net effect is similar to `m4_dquote'--it produces a quoted list of quoted arguments, for each ARG. The difference is that this version uses a comma-newline separator instead of just comma, to improve readability of the list; with the result that it is less efficient than `m4_dquote'. m4_define([zero],[0])m4_define([one],[1])m4_define([two],[2])dnl m4_dquote(zero, [one], [[two]]) =>[0],[one],[[two]] m4_make_list(zero, [one], [[two]]) =>[0], =>[one], =>[[two]] m4_foreach([number], m4_dquote(zero, [one], [[two]]), [ number]) => 0 1 two m4_foreach([number], m4_make_list(zero, [one], [[two]]), [ number]) => 0 1 two -- Macro: m4_quote (ARG, ...) Return the arguments as a single entity, i.e., wrap them into a pair of quotes. This effectively collapses multiple arguments into one, although it loses whitespace after unquoted commas in the process. -- Macro: m4_reverse (ARG, ...) Outputs each argument with the same level of quoting, but in reverse order, and with space following each comma for readability. m4_define([active], [ACT,IVE]) => m4_reverse(active, [active]) =>active, IVE, ACT -- Macro: m4_unquote (ARG, ...) This macro was introduced in Autoconf 2.62. Expand each argument, separated by commas. For a single ARG, this effectively removes a layer of quoting, and `m4_unquote([ARG])' is more efficient than the equivalent `m4_do([ARG])'. For multiple arguments, this results in an unquoted list of expansions. This is commonly used with `m4_split', in order to convert a single quoted list into a series of quoted elements. The following example aims at emphasizing the difference between several scenarios: not using these macros, using `m4_defn', using `m4_quote', using `m4_dquote', and using `m4_expand'. $ cat example.m4 dnl Overquote, so that quotes are visible. m4_define([show], [$[]1 = [$1], $[]@ = [$@]]) m4_define([a], [A]) m4_define([mkargs], [1, 2[,] 3]) m4_define([arg1], [[$1]]) m4_divert([0])dnl show(a, b) show([a, b]) show(m4_quote(a, b)) show(m4_dquote(a, b)) show(m4_expand([a, b])) arg1(mkargs) arg1([mkargs]) arg1(m4_defn([mkargs])) arg1(m4_quote(mkargs)) arg1(m4_dquote(mkargs)) arg1(m4_expand([mkargs])) $ autom4te -l m4sugar example.m4 $1 = A, $@ = [A],[b] $1 = a, b, $@ = [a, b] $1 = A,b, $@ = [A,b] $1 = [A],[b], $@ = [[A],[b]] $1 = A, b, $@ = [A, b] 1 mkargs 1, 2[,] 3 1,2, 3 [1],[2, 3] 1, 2, 3  File: autoconf.info, Node: Text processing Macros, Next: Number processing Macros, Prev: Evaluation Macros, Up: Programming in M4sugar 8.3.7 String manipulation in M4 ------------------------------- The following macros may be used to manipulate strings in M4. Many of the macros in this section intentionally result in quoted strings as output, rather than subjecting the arguments to further expansions. As a result, if you are manipulating text that contains active M4 characters, the arguments are passed with single quoting rather than double. -- Macro: m4_append (MACRO-NAME, STRING, [SEPARATOR]) -- Macro: m4_append_uniq (MACRO-NAME, STRING, [SEPARATOR] [IF-UNIQ], [IF-DUPLICATE]) Redefine MACRO-NAME to its former contents with SEPARATOR and STRING added at the end. If MACRO-NAME was undefined before (but not if it was defined but empty), then no SEPARATOR is added. As of Autoconf 2.62, neither STRING nor SEPARATOR are expanded during this macro; instead, they are expanded when MACRO-NAME is invoked. `m4_append' can be used to grow strings, and `m4_append_uniq' to grow strings without duplicating substrings. Additionally, `m4_append_uniq' takes two optional parameters as of Autoconf 2.62; IF-UNIQ is expanded if STRING was appended, and IF-DUPLICATE is expanded if STRING was already present. Also, `m4_append_uniq' warns if SEPARATOR is not empty, but occurs within STRING, since that can lead to duplicates. Note that `m4_append' can scale linearly in the length of the final string, depending on the quality of the underlying M4 implementation, while `m4_append_uniq' has an inherent quadratic scaling factor. If an algorithm can tolerate duplicates in the final string, use the former for speed. If duplicates must be avoided, consider using `m4_set_add' instead (*note Set manipulation Macros::). m4_define([active], [ACTIVE])dnl m4_append([sentence], [This is an])dnl m4_append([sentence], [ active ])dnl m4_append([sentence], [symbol.])dnl sentence =>This is an ACTIVE symbol. m4_undefine([active])dnl =>This is an active symbol. m4_append_uniq([list], [one], [, ], [new], [existing]) =>new m4_append_uniq([list], [one], [, ], [new], [existing]) =>existing m4_append_uniq([list], [two], [, ], [new], [existing]) =>new m4_append_uniq([list], [three], [, ], [new], [existing]) =>new m4_append_uniq([list], [two], [, ], [new], [existing]) =>existing list =>one, two, three m4_dquote(list) =>[one],[two],[three] m4_append([list2], [one], [[, ]])dnl m4_append_uniq([list2], [two], [[, ]])dnl m4_append([list2], [three], [[, ]])dnl list2 =>one, two, three m4_dquote(list2) =>[one, two, three] -- Macro: m4_append_uniq_w (MACRO-NAME, STRINGS) This macro was introduced in Autoconf 2.62. It is similar to `m4_append_uniq', but treats STRINGS as a whitespace separated list of words to append, and only appends unique words. MACRO-NAME is updated with a single space between new words. m4_append_uniq_w([numbers], [1 1 2])dnl m4_append_uniq_w([numbers], [ 2 3 ])dnl numbers =>1 2 3 -- Macro: m4_chomp (STRING) -- Macro: m4_chomp_all (STRING) Output STRING in quotes, but without a trailing newline. The macro `m4_chomp' is slightly faster, and removes at most one newline; the macro `m4_chomp_all' removes all consecutive trailing newlines. Unlike `m4_flatten', embedded newlines are left intact, and backslash does not influence the result. -- Macro: m4_combine ([SEPARATOR], PREFIX-LIST, [INFIX], SUFFIX-1, [SUFFIX-2], ...) This macro produces a quoted string containing the pairwise combination of every element of the quoted, comma-separated PREFIX-LIST, and every element from the SUFFIX arguments. Each pairwise combination is joined with INFIX in the middle, and successive pairs are joined by SEPARATOR. No expansion occurs on any of the arguments. No output occurs if either the PREFIX or SUFFIX list is empty, but the lists can contain empty elements. m4_define([a], [oops])dnl m4_combine([, ], [[a], [b], [c]], [-], [1], [2], [3]) =>a-1, a-2, a-3, b-1, b-2, b-3, c-1, c-2, c-3 m4_combine([, ], [[a], [b]], [-]) => m4_combine([, ], [[a], [b]], [-], []) =>a-, b- m4_combine([, ], [], [-], [1], [2]) => m4_combine([, ], [[]], [-], [1], [2]) =>-1, -2 -- Macro: m4_escape (STRING) Convert all instances of `[', `]', `#', and `$' within STRING into their respective quadrigraphs. The result is still a quoted string. -- Macro: m4_flatten (STRING) Flatten STRING into a single line. Delete all backslash-newline pairs, and replace all remaining newlines with a space. The result is still a quoted string. -- Macro: m4_join ([SEPARATOR], ARGS...) -- Macro: m4_joinall ([SEPARATOR], ARGS...) Concatenate each ARG, separated by SEPARATOR. `joinall' uses every argument, while `join' omits empty arguments so that there are no back-to-back separators in the output. The result is a quoted string. m4_define([active], [ACTIVE])dnl m4_join([|], [one], [], [active], [two]) =>one|active|two m4_joinall([|], [one], [], [active], [two]) =>one||active|two Note that if all you intend to do is join ARGS with commas between them, to form a quoted list suitable for `m4_foreach', it is more efficient to use `m4_dquote'. -- Macro: m4_newline ([TEXT]) This macro was introduced in Autoconf 2.62, and expands to a newline, followed by any TEXT. It is primarily useful for maintaining macro formatting, and ensuring that M4 does not discard leading whitespace during argument collection. -- Macro: m4_normalize (STRING) Remove leading and trailing spaces and tabs, sequences of backslash-then-newline, and replace multiple spaces, tabs, and newlines with a single space. This is a combination of `m4_flatten' and `m4_strip'. To determine if STRING consists only of bytes that would be removed by `m4_normalize', you can use `m4_ifblank'. -- Macro: m4_re_escape (STRING) Backslash-escape all characters in STRING that are active in regexps. -- Macro: m4_split (STRING, [REGEXP = `[\t ]+']) Split STRING into an M4 list of elements quoted by `[' and `]', while keeping white space at the beginning and at the end. If REGEXP is given, use it instead of `[\t ]+' for splitting. If STRING is empty, the result is an empty list. -- Macro: m4_strip (STRING) Strip whitespace from STRING. Sequences of spaces and tabs are reduced to a single space, then leading and trailing spaces are removed. The result is still a quoted string. Note that this does not interfere with newlines; if you want newlines stripped as well, consider `m4_flatten', or do it all at once with `m4_normalize'. To quickly test if STRING has only whitespace, use `m4_ifblank'. -- Macro: m4_text_box (MESSAGE, [FRAME = `-']) Add a text box around MESSAGE, using FRAME as the border character above and below the message. The FRAME argument must be a single byte, and does not support quadrigraphs. The frame correctly accounts for the subsequent expansion of MESSAGE. For example: m4_define([macro], [abc])dnl m4_text_box([macro]) =>## --- ## =>## abc ## =>## --- ## The MESSAGE must contain balanced quotes and parentheses, although quadrigraphs can be used to work around this. -- Macro: m4_text_wrap (STRING, [PREFIX], [PREFIX1 = `PREFIX'], [WIDTH = `79']) Break STRING into a series of whitespace-separated words, then output those words separated by spaces, and wrapping lines any time the output would exceed WIDTH columns. If given, PREFIX1 begins the first line, and PREFIX begins all wrapped lines. If PREFIX1 is longer than PREFIX, then the first line consists of just PREFIX1. If PREFIX is longer than PREFIX1, padding is inserted so that the first word of STRING begins at the same indentation as all wrapped lines. Note that using literal tab characters in any of the arguments will interfere with the calculation of width. No expansions occur on PREFIX, PREFIX1, or the words of STRING, although quadrigraphs are recognized. For some examples: m4_text_wrap([Short string */], [ ], [/* ], [20]) =>/* Short string */ m4_text_wrap([Much longer string */], [ ], [/* ], [20]) =>/* Much longer => string */ m4_text_wrap([Short doc.], [ ], [ --short ], [30]) => --short Short doc. m4_text_wrap([Short doc.], [ ], [ --too-wide ], [30]) => --too-wide => Short doc. m4_text_wrap([Super long documentation.], [ ], [ --too-wide ], 30) => --too-wide => Super long => documentation. -- Macro: m4_tolower (STRING) -- Macro: m4_toupper (STRING) Return STRING with letters converted to upper or lower case, respectively.  File: autoconf.info, Node: Number processing Macros, Next: Set manipulation Macros, Prev: Text processing Macros, Up: Programming in M4sugar 8.3.8 Arithmetic computation in M4 ---------------------------------- The following macros facilitate integer arithmetic operations. Where a parameter is documented as taking an arithmetic expression, you can use anything that can be parsed by `m4_eval'. -- Macro: m4_cmp (EXPR-1, EXPR-2) Compare the arithmetic expressions EXPR-1 and EXPR-2, and expand to `-1' if EXPR-1 is smaller, `0' if they are equal, and `1' if EXPR-1 is larger. -- Macro: m4_list_cmp (LIST-1, LIST-2) Compare the two M4 lists consisting of comma-separated arithmetic expressions, left to right. Expand to `-1' for the first element pairing where the value from LIST-1 is smaller, `1' where the value from LIST-2 is smaller, or `0' if both lists have the same values. If one list is shorter than the other, the remaining elements of the longer list are compared against zero. m4_list_cmp([1, 0], [1]) =>0 m4_list_cmp([1, [1 * 0]], [1, 0]) =>0 m4_list_cmp([1, 2], [1, 0]) =>1 m4_list_cmp([1, [1+1], 3],[1, 2]) =>1 m4_list_cmp([1, 2, -3], [1, 2]) =>-1 m4_list_cmp([1, 0], [1, 2]) =>-1 m4_list_cmp([1], [1, 2]) =>-1 -- Macro: m4_max (ARG, ...) This macro was introduced in Autoconf 2.62. Expand to the decimal value of the maximum arithmetic expression among all the arguments. -- Macro: m4_min (ARG, ...) This macro was introduced in Autoconf 2.62. Expand to the decimal value of the minimum arithmetic expression among all the arguments. -- Macro: m4_sign (EXPR) Expand to `-1' if the arithmetic expression EXPR is negative, `1' if it is positive, and `0' if it is zero. -- Macro: m4_version_compare (VERSION-1, VERSION-2) This macro was introduced in Autoconf 2.53, but had a number of usability limitations that were not lifted until Autoconf 2.62. Compare the version strings VERSION-1 and VERSION-2, and expand to `-1' if VERSION-1 is smaller, `0' if they are the same, or `1' VERSION-2 is smaller. Version strings must be a list of elements separated by `.', `,' or `-', where each element is a number along with optional case-insensitive letters designating beta releases. The comparison stops at the leftmost element that contains a difference, although a 0 element compares equal to a missing element. It is permissible to include commit identifiers in VERSION, such as an abbreviated SHA1 of the commit, provided there is still a monotonically increasing prefix to allow for accurate version-based comparisons. For example, this paragraph was written when the development snapshot of autoconf claimed to be at version `2.61a-248-dc51', or 248 commits after the 2.61a release, with an abbreviated commit identification of `dc51'. m4_version_compare([1.1], [2.0]) =>-1 m4_version_compare([2.0b], [2.0a]) =>1 m4_version_compare([1.1.1], [1.1.1a]) =>-1 m4_version_compare([1.2], [1.1.1a]) =>1 m4_version_compare([1.0], [1]) =>0 m4_version_compare([1.1pre], [1.1PRE]) =>0 m4_version_compare([1.1a], [1,10]) =>-1 m4_version_compare([2.61a], [2.61a-248-dc51]) =>-1 m4_version_compare([2.61b], [2.61a-248-dc51]) =>1 -- Macro: m4_version_prereq (VERSION, [IF-NEW-ENOUGH], [IF-OLD = `m4_fatal']) Compares VERSION against the version of Autoconf currently running. If the running version is at VERSION or newer, expand IF-NEW-ENOUGH, but if VERSION is larger than the version currently executing, expand IF-OLD, which defaults to printing an error message and exiting m4sugar with status 63. When given only one argument, this behaves like `AC_PREREQ' (*note Versioning::). Remember that the autoconf philosophy favors feature checks over version checks.  File: autoconf.info, Node: Set manipulation Macros, Next: Forbidden Patterns, Prev: Number processing Macros, Up: Programming in M4sugar 8.3.9 Set manipulation in M4 ---------------------------- Sometimes, it is necessary to track a set of data, where the order does not matter and where there are no duplicates in the set. The following macros facilitate set manipulations. Each set is an opaque object, which can only be accessed via these basic operations. The underlying implementation guarantees linear scaling for set creation, which is more efficient than using the quadratic `m4_append_uniq'. Both set names and values can be arbitrary strings, except for unbalanced quotes. This implementation ties up memory for removed elements until the next operation that must traverse all the elements of a set; and although that may slow down some operations until the memory for removed elements is pruned, it still guarantees linear performance. -- Macro: m4_set_add (SET, VALUE, [IF-UNIQ], [IF-DUP]) Adds the string VALUE as a member of set SET. Expand IF-UNIQ if the element was added, or IF-DUP if it was previously in the set. Operates in amortized constant time, so that set creation scales linearly. -- Macro: m4_set_add_all (SET, VALUE...) Adds each VALUE to the set SET. This is slightly more efficient than repeatedly invoking `m4_set_add'. -- Macro: m4_set_contains (SET, VALUE, [IF-PRESENT], [IF-ABSENT]) Expands IF-PRESENT if the string VALUE is a member of SET, otherwise IF-ABSENT. m4_set_contains([a], [1], [yes], [no]) =>no m4_set_add([a], [1], [added], [dup]) =>added m4_set_add([a], [1], [added], [dup]) =>dup m4_set_contains([a], [1], [yes], [no]) =>yes m4_set_remove([a], [1], [removed], [missing]) =>removed m4_set_contains([a], [1], [yes], [no]) =>no m4_set_remove([a], [1], [removed], [missing]) =>missing -- Macro: m4_set_contents (SET, [SEP]) -- Macro: m4_set_dump (SET, [SEP]) Expands to a single string consisting of all the members of the set SET, each separated by SEP, which is not expanded. `m4_set_contents' leaves the elements in SET but reclaims any memory occupied by removed elements, while `m4_set_dump' is a faster one-shot action that also deletes the set. No provision is made for disambiguating members that contain a non-empty SEP as a substring; use `m4_set_empty' to distinguish between an empty set and the set containing only the empty string. The order of the output is unspecified; in the current implementation, part of the speed of `m4_set_dump' results from using a different output order than `m4_set_contents'. These macros scale linearly in the size of the set before memory pruning, and `m4_set_contents([SET], [SEP])' is faster than `m4_joinall([SEP]m4_set_listc([SET]))'. m4_set_add_all([a], [1], [2], [3]) => m4_set_contents([a], [-]) =>1-2-3 m4_joinall([-]m4_set_listc([a])) =>1-2-3 m4_set_dump([a], [-]) =>3-2-1 m4_set_contents([a]) => m4_set_add([a], []) => m4_set_contents([a], [-]) => -- Macro: m4_set_delete (SET) Delete all elements and memory associated with SET. This is linear in the set size, and faster than removing one element at a time. -- Macro: m4_set_difference (SETA, SETB) -- Macro: m4_set_intersection (SETA, SETB) -- Macro: m4_set_union (SETA, SETB) Compute the relation between SETA and SETB, and output the result as a list of quoted arguments without duplicates and with a leading comma. Set difference selects the elements in SETA but not SETB, intersection selects only elements in both sets, and union selects elements in either set. These actions are linear in the sum of the set sizes. The leading comma is necessary to distinguish between no elements and the empty string as the only element. m4_set_add_all([a], [1], [2], [3]) => m4_set_add_all([b], [3], [], [4]) => m4_set_difference([a], [b]) =>,1,2 m4_set_difference([b], [a]) =>,,4 m4_set_intersection([a], [b]) =>,3 m4_set_union([a], [b]) =>,1,2,3,,4 -- Macro: m4_set_empty (SET, [IF-EMPTY], [IF-ELEMENTS]) Expand IF-EMPTY if the set SET has no elements, otherwise expand IF-ELEMENTS. This macro operates in constant time. Using this macro can help disambiguate output from `m4_set_contents' or `m4_set_list'. -- Macro: m4_set_foreach (SET, VARIABLE, ACTION) For each element in the set SET, expand ACTION with the macro VARIABLE defined as the set element. Behavior is unspecified if ACTION recursively lists the contents of SET (although listing other sets is acceptable), or if it modifies the set in any way other than removing the element currently contained in VARIABLE. This macro is faster than the corresponding `m4_foreach([VARIABLE], m4_indir([m4_dquote]m4_set_listc([SET])), [ACTION])', although `m4_set_map' might be faster still. m4_set_add_all([a]m4_for([i], [1], [5], [], [,i])) => m4_set_contents([a]) =>12345 m4_set_foreach([a], [i], [m4_if(m4_eval(i&1), [0], [m4_set_remove([a], i, [i])])]) =>24 m4_set_contents([a]) =>135 -- Macro: m4_set_list (SET) -- Macro: m4_set_listc (SET) Produce a list of arguments, where each argument is a quoted element from the set SET. The variant `m4_set_listc' is unambiguous, by adding a leading comma if there are any set elements, whereas the variant `m4_set_list' cannot distinguish between an empty set and a set containing only the empty string. These can be directly used in macros that take multiple arguments, such as `m4_join' or `m4_set_add_all', or wrapped by `m4_dquote' for macros that take a quoted list, such as `m4_map' or `m4_foreach'. Any memory occupied by removed elements is reclaimed during these macros. m4_set_add_all([a], [1], [2], [3]) => m4_set_list([a]) =>1,2,3 m4_set_list([b]) => m4_set_listc([b]) => m4_count(m4_set_list([b])) =>1 m4_set_empty([b], [0], [m4_count(m4_set_list([b]))]) =>0 m4_set_add([b], []) => m4_set_list([b]) => m4_set_listc([b]) =>, m4_count(m4_set_list([b])) =>1 m4_set_empty([b], [0], [m4_count(m4_set_list([b]))]) =>1 -- Macro: m4_set_map (SET, ACTION) For each element in the set SET, expand ACTION with a single argument of the set element. Behavior is unspecified if ACTION recursively lists the contents of SET (although listing other sets is acceptable), or if it modifies the set in any way other than removing the element passed as an argument. This macro is faster than either corresponding counterpart of `m4_map_args([ACTION]m4_set_listc([SET]))' or `m4_set_foreach([SET], [var], [ACTION(m4_defn([var]))])'. It is possible to use `m4_curry' if more than one argument is needed for ACTION, although it is more efficient to use `m4_set_map_sep' in that case. -- Macro: m4_set_map_sep (SET, [PRE], [POST], [SEP]) For each element in the set SET, expand `PRE[element]POST', additionally expanding SEP between elements. Behavior is unspecified if the expansion recursively lists the contents of SET (although listing other sets is acceptable), or if it modifies the set in any way other than removing the element visited by the expansion. This macro provides the most efficient means for non-destructively visiting the elements of a set; in particular, `m4_set_map([SET], [ACTION])' is equivalent to `m4_set_map_sep([SET], [ACTION(], [)])'. -- Macro: m4_set_remove (SET, VALUE, [IF-PRESENT], [IF-ABSENT]) If VALUE is an element in the set SET, then remove it and expand IF-PRESENT. Otherwise expand IF-ABSENT. This macro operates in constant time so that multiple removals will scale linearly rather than quadratically; but when used outside of `m4_set_foreach' or `m4_set_map', it leaves memory occupied until the set is later compacted by `m4_set_contents' or `m4_set_list'. Several other set operations are then less efficient between the time of element removal and subsequent memory compaction, but still maintain their guaranteed scaling performance. -- Macro: m4_set_size (SET) Expand to the size of the set SET. This implementation operates in constant time, and is thus more efficient than `m4_eval(m4_count(m4_set_listc([set])) - 1)'.  File: autoconf.info, Node: Forbidden Patterns, Prev: Set manipulation Macros, Up: Programming in M4sugar 8.3.10 Forbidden Patterns ------------------------- M4sugar provides a means to define suspicious patterns, patterns describing tokens which should not be found in the output. For instance, if an Autoconf `configure' script includes tokens such as `AC_DEFINE', or `dnl', then most probably something went wrong (typically a macro was not evaluated because of overquotation). M4sugar forbids all the tokens matching `^_?m4_' and `^dnl$'. Additional layers, such as M4sh and Autoconf, add additional forbidden patterns to the list. -- Macro: m4_pattern_forbid (PATTERN) Declare that no token matching PATTERN must be found in the output. Comments are not checked; this can be a problem if, for instance, you have some macro left unexpanded after an `#include'. No consensus is currently found in the Autoconf community, as some people consider it should be valid to name macros in comments (which doesn't make sense to the authors of this documentation: input, such as macros, should be documented by `dnl' comments; reserving `#'-comments to document the output). Of course, you might encounter exceptions to these generic rules, for instance you might have to refer to `$m4_flags'. -- Macro: m4_pattern_allow (PATTERN) Any token matching PATTERN is allowed, including if it matches an `m4_pattern_forbid' pattern.  File: autoconf.info, Node: Debugging via autom4te, Prev: Programming in M4sugar, Up: Programming in M4 8.4 Debugging via autom4te ========================== At times, it is desirable to see what was happening inside m4, to see why output was not matching expectations. However, post-processing done by `autom4te' means that directly using the m4 builtin `m4_traceon' is likely to interfere with operation. Also, frequent diversion changes and the concept of forbidden tokens make it difficult to use `m4_defn' to generate inline comments in the final output. There are a couple of tools to help with this. One is the use of the `--trace' option provided by `autom4te' (as well as each of the programs that wrap `autom4te', such as `autoconf'), in order to inspect when a macro is called and with which arguments. For example, when this paragraph was written, the autoconf version could be found by: $ autoconf --trace=AC_INIT configure.ac:23:AC_INIT:GNU Autoconf:2.63b.95-3963:bug-autoconf@gnu.org $ autoconf --trace='AC_INIT:version is $2' version is 2.63b.95-3963 Another trick is to print out the expansion of various m4 expressions to standard error or to an independent file, with no further m4 expansion, and without interfering with diversion changes or the post-processing done to standard output. `m4_errprintn' shows a given expression on standard error. For example, if you want to see the expansion of an autoconf primitive or of one of your autoconf macros, you can do it like this: $ cat <<\EOF > configure.ac AC_INIT m4_errprintn([The definition of AC_DEFINE_UNQUOTED:]) m4_errprintn(m4_defn([AC_DEFINE_UNQUOTED])) AC_OUTPUT EOF $ autoconf error-->The definition of AC_DEFINE_UNQUOTED: error-->_AC_DEFINE_Q([], $@)  File: autoconf.info, Node: Programming in M4sh, Next: Writing Autoconf Macros, Prev: Programming in M4, Up: Top 9 Programming in M4sh ********************* M4sh, pronounced "mash", is aiming at producing portable Bourne shell scripts. This name was coined by Lars J. Aas, who notes that, according to the Webster's Revised Unabridged Dictionary (1913): Mash \Mash\, n. [Akin to G. meisch, maisch, meische, maische, mash, wash, and prob. to AS. miscian to mix. See "Mix".] 1. A mass of mixed ingredients reduced to a soft pulpy state by beating or pressure... 2. A mixture of meal or bran and water fed to animals. 3. A mess; trouble. [Obs.] -Beau. & Fl. M4sh reserves the M4 macro namespace `^_AS_' for internal use, and the namespace `^AS_' for M4sh macros. It also reserves the shell and environment variable namespace `^as_', and the here-document delimiter namespace `^_AS[A-Z]' in the output file. You should not define your own macros or output shell code that conflicts with these namespaces. * Menu: * Common Shell Constructs:: Portability layer for common shell constructs * Polymorphic Variables:: Support for indirect variable names * Initialization Macros:: Macros to establish a sane shell environment * File Descriptor Macros:: File descriptor macros for input and output  File: autoconf.info, Node: Common Shell Constructs, Next: Polymorphic Variables, Up: Programming in M4sh 9.1 Common Shell Constructs =========================== M4sh provides portable alternatives for some common shell constructs that unfortunately are not portable in practice. -- Macro: AS_BOX (TEXT, [CHAR = `-']) Expand into shell code that will output TEXT surrounded by a box with CHAR in the top and bottom border. TEXT should not contain a newline, but may contain shell expansions valid for unquoted here-documents. CHAR defaults to `-', but can be any character except `/', `'', `"', `\', `&', or ``'. This is useful for outputting a comment box into log files to separate distinct phases of script operation. -- Macro: AS_CASE (WORD, [PATTERN1], [IF-MATCHED1], ..., [DEFAULT]) Expand into a shell `case' statement, where WORD is matched against one or more patterns. IF-MATCHED is run if the corresponding pattern matched WORD, else DEFAULT is run. Avoids several portability issues (*note Limitations of Shell Builtins: case.). -- Macro: AS_DIRNAME (FILE-NAME) Output the directory portion of FILE-NAME. For example, if `$file' is `/one/two/three', the command `dir=`AS_DIRNAME(["$file"])`' sets `dir' to `/one/two'. This interface may be improved in the future to avoid forks and losing trailing newlines. -- Macro: AS_ECHO (WORD) Emits WORD to the standard output, followed by a newline. WORD must be a single shell word (typically a quoted string). The bytes of WORD are output as-is, even if it starts with "-" or contains "\". Redirections can be placed outside the macro invocation. This is much more portable than using `echo' (*note Limitations of Shell Builtins: echo.). -- Macro: AS_ECHO_N (WORD) Emits WORD to the standard output, without a following newline. WORD must be a single shell word (typically a quoted string) and, for portability, should not include more than one newline. The bytes of WORD are output as-is, even if it starts with "-" or contains "\". Redirections can be placed outside the macro invocation. -- Macro: AS_ESCAPE (STRING, [CHARS = ``\"$']) Expands to STRING, with any characters in CHARS escaped with a backslash (`\'). CHARS should be at most four bytes long, and only contain characters from the set ``\"$'; however, characters may be safely listed more than once in CHARS for the sake of syntax highlighting editors. The current implementation expands STRING after adding escapes; if STRING contains macro calls that in turn expand to text needing shell quoting, you can use `AS_ESCAPE(m4_dquote(m4_expand([string])))'. The default for CHARS (`\"$`') is the set of characters needing escapes when STRING will be used literally within double quotes. One common variant is the set of characters to protect when STRING will be used literally within back-ticks or an unquoted here-document (`\$`'). Another common variant is `""', which can be used to form a double-quoted string containing the same expansions that would have occurred if STRING were expanded in an unquoted here-document; however, when using this variant, care must be taken that STRING does not use double quotes within complex variable expansions (such as `${foo-`echo "hi"`}') that would be broken with improper escapes. This macro is often used with `AS_ECHO'. For an example, observe the output generated by the shell code generated from this snippet: foo=bar AS_ECHO(["AS_ESCAPE(["$foo" = ])AS_ESCAPE(["$foo"], [""])"]) =>"$foo" = "bar" m4_define([macro], [a, [\b]]) AS_ECHO(["AS_ESCAPE([[macro]])"]) =>macro AS_ECHO(["AS_ESCAPE([macro])"]) =>a, b AS_ECHO(["AS_ESCAPE(m4_dquote(m4_expand([macro])))"]) =>a, \b To escape a string that will be placed within single quotes, use: m4_bpatsubst([[STRING]], ['], ['\\'']) -- Macro: AS_EXECUTABLE_P (FILE) Emit code to probe whether FILE is a regular file with executable permissions (and not a directory with search permissions). The caller is responsible for quoting FILE. -- Macro: AS_EXIT ([STATUS = `$?']) Emit code to exit the shell with STATUS, defaulting to `$?'. This macro works around shells that see the exit status of the command prior to `exit' inside a `trap 0' handler (*note Limitations of Shell Builtins: trap.). -- Macro: AS_IF (TEST1, [RUN-IF-TRUE1], ..., [RUN-IF-FALSE]) Run shell code TEST1. If TEST1 exits with a zero status then run shell code RUN-IF-TRUE1, else examine further tests. If no test exits with a zero status, run shell code RUN-IF-FALSE, with simplifications if either RUN-IF-TRUE1 or RUN-IF-FALSE is empty. For example, AS_IF([test "x$foo" = xyes], [HANDLE_FOO([yes])], [test "x$foo" != xno], [HANDLE_FOO([maybe])], [echo foo not specified]) ensures any required macros of `HANDLE_FOO' are expanded before the first test. -- Macro: AS_MKDIR_P (FILE-NAME) Make the directory FILE-NAME, including intervening directories as necessary. This is equivalent to `mkdir -p -- FILE-NAME', except that it is portable to older versions of `mkdir' that lack support for the `-p' option or for the `--' delimiter (*note Limitations of Usual Tools: mkdir.). Also, `AS_MKDIR_P' succeeds if FILE-NAME is a symbolic link to an existing directory, even though Posix is unclear whether `mkdir -p' should succeed in that case. If creation of FILE-NAME fails, exit the script. Also see the `AC_PROG_MKDIR_P' macro (*note Particular Programs::). -- Macro: AS_SET_STATUS (STATUS) Emit shell code to set the value of `$?' to STATUS, as efficiently as possible. However, this is not guaranteed to abort a shell running with `set -e' (*note Limitations of Shell Builtins: set.). This should also be used at the end of a complex shell function instead of `return' (*note Shell Functions::) to avoid a DJGPP shell bug. -- Macro: AS_TR_CPP (EXPRESSION) Transform EXPRESSION into a valid right-hand side for a C `#define'. For example: # This outputs "#define HAVE_CHAR_P 1". # Notice the m4 quoting around #, to prevent an m4 comment type="char *" echo "[#]define AS_TR_CPP([HAVE_$type]) 1" -- Macro: AS_TR_SH (EXPRESSION) Transform EXPRESSION into shell code that generates a valid shell variable name. The result is literal when possible at m4 time, but must be used with `eval' if EXPRESSION causes shell indirections. For example: # This outputs "Have it!". header="sys/some file.h" eval AS_TR_SH([HAVE_$header])=yes if test "x$HAVE_sys_some_file_h" = xyes; then echo "Have it!"; fi -- Macro: AS_SET_CATFILE (VAR, DIR, FILE) Set the polymorphic shell variable VAR to DIR/FILE, but optimizing the common cases (DIR or FILE is `.', FILE is absolute, etc.). -- Macro: AS_UNSET (VAR) Unsets the shell variable VAR, working around bugs in older shells (*note Limitations of Shell Builtins: unset.). VAR can be a literal or indirect variable name. -- Macro: AS_VERSION_COMPARE (VERSION-1, VERSION-2, [ACTION-IF-LESS], [ACTION-IF-EQUAL], [ACTION-IF-GREATER]) Compare two strings VERSION-1 and VERSION-2, possibly containing shell variables, as version strings, and expand ACTION-IF-LESS, ACTION-IF-EQUAL, or ACTION-IF-GREATER depending upon the result. The algorithm to compare is similar to the one used by strverscmp in glibc (*note String/Array Comparison: (libc)String/Array Comparison.).  File: autoconf.info, Node: Polymorphic Variables, Next: Initialization Macros, Prev: Common Shell Constructs, Up: Programming in M4sh 9.2 Support for indirect variable names ======================================= Often, it is convenient to write a macro that will emit shell code operating on a shell variable. The simplest case is when the variable name is known. But a more powerful idiom is writing shell code that can work through an indirection, where another variable or command substitution produces the name of the variable to actually manipulate. M4sh supports the notion of polymorphic shell variables, making it easy to write a macro that can deal with either literal or indirect variable names and output shell code appropriate for both use cases. Behavior is undefined if expansion of an indirect variable does not result in a literal variable name. -- Macro: AS_LITERAL_IF (EXPRESSION, [IF-LITERAL], [IF-NOT], [IF-SIMPLE-REF = `IF-NOT']) -- Macro: AS_LITERAL_WORD_IF (EXPRESSION, [IF-LITERAL], [IF-NOT], [IF-SIMPLE-REF = `IF-NOT']) If the expansion of EXPRESSION is definitely a shell literal, expand IF-LITERAL. If the expansion of EXPRESSION looks like it might contain shell indirections (such as `$var' or ``expr`'), then IF-NOT is expanded. Sometimes, it is possible to output optimized code if EXPRESSION consists only of shell variable expansions (such as `${var}'), in which case IF-SIMPLE-REF can be provided; but defaulting to IF-NOT should always be safe. `AS_LITERAL_WORD_IF' only expands IF-LITERAL if EXPRESSION looks like a single shell word, containing no whitespace; while `AS_LITERAL_IF' allows whitespace in EXPRESSION. In order to reduce the time spent recognizing whether an EXPRESSION qualifies as a literal or a simple indirection, the implementation is somewhat conservative: EXPRESSION must be a single shell word (possibly after stripping whitespace), consisting only of bytes that would have the same meaning whether unquoted or enclosed in double quotes (for example, `a.b' results in IF-LITERAL, even though it is not a valid shell variable name; while both `'a'' and `[$]' result in IF-NOT, because they behave differently than `"'a'"' and `"[$]"'). This macro can be used in contexts for recognizing portable file names (such as in the implementation of `AC_LIBSOURCE'), or coupled with some transliterations for forming valid variable names (such as in the implementation of `AS_TR_SH', which uses an additional `m4_translit' to convert `.' to `_'). This example shows how to read the contents of the shell variable `bar', exercising all three arguments to `AS_LITERAL_IF'. It results in a script that will output the line `hello' three times. AC_DEFUN([MY_ACTION], [AS_LITERAL_IF([$1], [echo "$$1"], [AS_VAR_COPY([var], [$1]) echo "$var"], [eval 'echo "$'"$1"\"])]) foo=bar bar=hello MY_ACTION([bar]) MY_ACTION([`echo bar`]) MY_ACTION([$foo]) -- Macro: AS_VAR_APPEND (VAR, TEXT) Emit shell code to append the shell expansion of TEXT to the end of the current contents of the polymorphic shell variable VAR, taking advantage of shells that provide the `+=' extension for more efficient scaling. For situations where the final contents of VAR are relatively short (less than 256 bytes), it is more efficient to use the simpler code sequence of `VAR=${VAR}TEXT' (or its polymorphic equivalent of `AS_VAR_COPY([t], [VAR])' and `AS_VAR_SET([VAR], ["$t"TEXT])'). But in the case when the script will be repeatedly appending text into `var', issues of scaling start to become apparent. A naive implementation requires execution time linear to the length of the current contents of VAR as well as the length of TEXT for a single append, for an overall quadratic scaling with multiple appends. This macro takes advantage of shells which provide the extension `VAR+=TEXT', which can provide amortized constant time for a single append, for an overall linear scaling with multiple appends. Note that unlike `AS_VAR_SET', this macro requires that TEXT be quoted properly to avoid field splitting and file name expansion. -- Macro: AS_VAR_ARITH (VAR, EXPRESSION) Emit shell code to compute the arithmetic expansion of EXPRESSION, assigning the result as the contents of the polymorphic shell variable VAR. The code takes advantage of shells that provide `$(())' for fewer forks, but uses `expr' as a fallback. Therefore, the syntax for a valid EXPRESSION is rather limited: all operators must occur as separate shell arguments and with proper quoting, there is no portable equality operator, all variables containing numeric values must be expanded prior to the computation, all numeric values must be provided in decimal without leading zeroes, and the first shell argument should not be a negative number. In the following example, this snippet will print `(2+3)*4 == 20'. bar=3 AS_VAR_ARITH([foo], [\( 2 + $bar \) \* 4]) echo "(2+$bar)*4 == $foo" -- Macro: AS_VAR_COPY (DEST, SOURCE) Emit shell code to assign the contents of the polymorphic shell variable SOURCE to the polymorphic shell variable DEST. For example, executing this M4sh snippet will output `bar hi': foo=bar bar=hi AS_VAR_COPY([a], [foo]) AS_VAR_COPY([b], [$foo]) echo "$a $b" When it is necessary to access the contents of an indirect variable inside a shell double-quoted context, the recommended idiom is to first copy the contents into a temporary literal shell variable. for header in stdint_h inttypes_h ; do AS_VAR_COPY([var], [ac_cv_header_$header]) echo "$header detected: $var" done -- Macro: AS_VAR_IF (VAR, [WORD], [IF-EQUAL], [IF-NOT-EQUAL]) Output a shell conditional statement. If the contents of the polymorphic shell variable VAR match the string WORD, execute IF-EQUAL; otherwise execute IF-NOT-EQUAL. WORD must be a single shell word (typically a quoted string). Avoids shell bugs if an interrupt signal arrives while a command substitution in VAR is being expanded. -- Macro: AS_VAR_PUSHDEF (M4-NAME, VALUE) -- Macro: AS_VAR_POPDEF (M4-NAME) A common M4sh idiom involves composing shell variable names from an m4 argument (for example, writing a macro that uses a cache variable). VALUE can be an arbitrary string, which will be transliterated into a valid shell name by `AS_TR_SH'. In order to access the composed variable name based on VALUE, it is easier to declare a temporary m4 macro M4-NAME with `AS_VAR_PUSHDEF', then use that macro as the argument to subsequent `AS_VAR' macros as a polymorphic variable name, and finally free the temporary macro with `AS_VAR_POPDEF'. These macros are often followed with `dnl', to avoid excess newlines in the output. Here is an involved example, that shows the power of writing macros that can handle composed shell variable names: m4_define([MY_CHECK_HEADER], [AS_VAR_PUSHDEF([my_Header], [ac_cv_header_$1])dnl AS_VAR_IF([my_Header], [yes], [echo "header $1 detected"])dnl AS_VAR_POPDEF([my_Header])dnl ]) MY_CHECK_HEADER([stdint.h]) for header in inttypes.h stdlib.h ; do MY_CHECK_HEADER([$header]) done In the above example, `MY_CHECK_HEADER' can operate on polymorphic variable names. In the first invocation, the m4 argument is `stdint.h', which transliterates into a literal `stdint_h'. As a result, the temporary macro `my_Header' expands to the literal shell name `ac_cv_header_stdint_h'. In the second invocation, the m4 argument to `MY_CHECK_HEADER' is `$header', and the temporary macro `my_Header' expands to the indirect shell name `$as_my_Header'. During the shell execution of the for loop, when `$header' contains `inttypes.h', then `$as_my_Header' contains `ac_cv_header_inttypes_h'. If this script is then run on a platform where all three headers have been previously detected, the output of the script will include: header stdint.h detected header inttypes.h detected header stdlib.h detected -- Macro: AS_VAR_SET (VAR, [VALUE]) Emit shell code to assign the contents of the polymorphic shell variable VAR to the shell expansion of VALUE. VALUE is not subject to field splitting or file name expansion, so if command substitution is used, it may be done with ``""`' rather than using an intermediate variable (*note Shell Substitutions::). However, VALUE does undergo rescanning for additional macro names; behavior is unspecified if late expansion results in any shell meta-characters. -- Macro: AS_VAR_SET_IF (VAR, [IF-SET], [IF-UNDEF]) Emit a shell conditional statement, which executes IF-SET if the polymorphic shell variable `var' is set to any value, and IF-UNDEF otherwise. -- Macro: AS_VAR_TEST_SET (VAR) Emit a shell statement that results in a successful exit status only if the polymorphic shell variable `var' is set.  File: autoconf.info, Node: Initialization Macros, Next: File Descriptor Macros, Prev: Polymorphic Variables, Up: Programming in M4sh 9.3 Initialization Macros ========================= -- Macro: AS_BOURNE_COMPATIBLE Set up the shell to be more compatible with the Bourne shell as standardized by Posix, if possible. This may involve setting environment variables, or setting options, or similar implementation-specific actions. This macro is deprecated, since `AS_INIT' already invokes it. -- Macro: AS_INIT Initialize the M4sh environment. This macro calls `m4_init', then outputs the `#! /bin/sh' line, a notice about where the output was generated from, and code to sanitize the environment for the rest of the script. Among other initializations, this sets `SHELL' to the shell chosen to run the script (*note CONFIG_SHELL::), and `LC_ALL' to ensure the C locale. Finally, it changes the current diversion to `BODY'. `AS_INIT' is called automatically by `AC_INIT' and `AT_INIT', so shell code in `configure', `config.status', and `testsuite' all benefit from a sanitized shell environment. -- Macro: AS_INIT_GENERATED (FILE, [COMMENT]) Emit shell code to start the creation of a subsidiary shell script in FILE, including changing FILE to be executable. This macro populates the child script with information learned from the parent (thus, the emitted code is equivalent in effect, but more efficient, than the code output by `AS_INIT', `AS_BOURNE_COMPATIBLE', and `AS_SHELL_SANITIZE'). If present, COMMENT is output near the beginning of the child, prior to the shell initialization code, and is subject to parameter expansion, command substitution, and backslash quote removal. The parent script should check the exit status after this macro, in case FILE could not be properly created (for example, if the disk was full). If successfully created, the parent script can then proceed to append additional M4sh constructs into the child script. Note that the child script starts life without a log file open, so if the parent script uses logging (*note AS_MESSAGE_LOG_FD::), you must temporarily disable any attempts to use the log file until after emitting code to open a log within the child. On the other hand, if the parent script has `AS_MESSAGE_FD' redirected somewhere besides `1', then the child script already has code that copies stdout to that descriptor. Currently, the suggested idiom for writing a M4sh shell script from within another script is: AS_INIT_GENERATED([FILE], [[# My child script. ]]) || { AS_ECHO(["Failed to create child script"]); AS_EXIT; } m4_pushdef([AS_MESSAGE_LOG_FD])dnl cat >> "FILE" <<\__EOF__ # Code to initialize AS_MESSAGE_LOG_FD m4_popdef([AS_MESSAGE_LOG_FD])dnl # Additional code __EOF__ This, however, may change in the future as the M4sh interface is stabilized further. Also, be aware that use of `LINENO' within the child script may report line numbers relative to their location in the parent script, even when using `AS_LINENO_PREPARE', if the parent script was unable to locate a shell with working `LINENO' support. -- Macro: AS_LINENO_PREPARE Find a shell that supports the special variable `LINENO', which contains the number of the currently executing line. This macro is automatically invoked by `AC_INIT' in configure scripts. -- Macro: AS_ME_PREPARE Set up variable `as_me' to be the basename of the currently executing script. This macro is automatically invoked by `AC_INIT' in configure scripts. -- Macro: AS_TMPDIR (PREFIX, [DIR = `${TMPDIR:=/tmp}']) Create, as safely as possible, a temporary sub-directory within DIR with a name starting with PREFIX. PREFIX should be 2-4 characters, to make it slightly easier to identify the owner of the directory. If DIR is omitted, then the value of `TMPDIR' will be used (defaulting to `/tmp'). On success, the name of the newly created directory is stored in the shell variable `tmp'. On error, the script is aborted. Typically, this macro is coupled with some exit traps to delete the created directory and its contents on exit or interrupt. However, there is a slight window between when the directory is created and when the name is actually known to the shell, so an interrupt at the right moment might leave the temporary directory behind. Hence it is important to use a PREFIX that makes it easier to determine if a leftover temporary directory from an interrupted script is safe to delete. The use of the output variable `$tmp' rather than something in the `as_' namespace is historical; it has the unfortunate consequence that reusing this otherwise common name for any other purpose inside your script has the potential to break any cleanup traps designed to remove the temporary directory. -- Macro: AS_SHELL_SANITIZE Initialize the shell suitably for `configure' scripts. This has the effect of `AS_BOURNE_COMPATIBLE', and sets some other environment variables for predictable results from configuration tests. For example, it sets `LC_ALL' to change to the default C locale. *Note Special Shell Variables::. This macro is deprecated, since `AS_INIT' already invokes it.  File: autoconf.info, Node: File Descriptor Macros, Prev: Initialization Macros, Up: Programming in M4sh 9.4 File Descriptor Macros ========================== The following macros define file descriptors used to output messages (or input values) from `configure' scripts. For example: echo "$wombats found" >&AS_MESSAGE_LOG_FD echo 'Enter desired kangaroo count:' >&AS_MESSAGE_FD read kangaroos <&AS_ORIGINAL_STDIN_FD` However doing so is seldom needed, because Autoconf provides higher level macros as described below. -- Macro: AS_MESSAGE_FD The file descriptor for `checking for...' messages and results. By default, `AS_INIT' sets this to `1' for standalone M4sh clients. However, `AC_INIT' shuffles things around to another file descriptor, in order to allow the `-q' option of `configure' to choose whether messages should go to the script's standard output or be discarded. If you want to display some messages, consider using one of the printing macros (*note Printing Messages::) instead. Copies of messages output via these macros are also recorded in `config.log'. -- Macro: AS_MESSAGE_LOG_FD This must either be empty, or expand to a file descriptor for log messages. By default, `AS_INIT' sets this macro to the empty string for standalone M4sh clients, thus disabling logging. However, `AC_INIT' shuffles things around so that both `configure' and `config.status' use `config.log' for log messages. Macros that run tools, like `AC_COMPILE_IFELSE' (*note Running the Compiler::), redirect all output to this descriptor. You may want to do so if you develop such a low-level macro. -- Macro: AS_ORIGINAL_STDIN_FD This must expand to a file descriptor for the original standard input. By default, `AS_INIT' sets this macro to `0' for standalone M4sh clients. However, `AC_INIT' shuffles things around for safety. When `configure' runs, it may accidentally execute an interactive command that has the same name as the non-interactive meant to be used or checked. If the standard input was the terminal, such interactive programs would cause `configure' to stop, pending some user input. Therefore `configure' redirects its standard input from `/dev/null' during its initialization. This is not normally a problem, since `configure' normally does not need user input. In the extreme case where your `configure' script really needs to obtain some values from the original standard input, you can read them explicitly from `AS_ORIGINAL_STDIN_FD'.  File: autoconf.info, Node: Writing Autoconf Macros, Next: Portable Shell, Prev: Programming in M4sh, Up: Top 10 Writing Autoconf Macros ************************** When you write a feature test that could be applicable to more than one software package, the best thing to do is encapsulate it in a new macro. Here are some instructions and guidelines for writing Autoconf macros. * Menu: * Macro Definitions:: Basic format of an Autoconf macro * Macro Names:: What to call your new macros * Reporting Messages:: Notifying `autoconf' users * Dependencies Between Macros:: What to do when macros depend on other macros * Obsoleting Macros:: Warning about old ways of doing things * Coding Style:: Writing Autoconf macros a` la Autoconf  File: autoconf.info, Node: Macro Definitions, Next: Macro Names, Up: Writing Autoconf Macros 10.1 Macro Definitions ====================== -- Macro: AC_DEFUN (NAME, [BODY]) Autoconf macros are defined using the `AC_DEFUN' macro, which is similar to the M4 builtin `m4_define' macro; this creates a macro named NAME and with BODY as its expansion. In addition to defining a macro, `AC_DEFUN' adds to it some code that is used to constrain the order in which macros are called, while avoiding redundant output (*note Prerequisite Macros::). An Autoconf macro definition looks like this: AC_DEFUN(MACRO-NAME, MACRO-BODY) You can refer to any arguments passed to the macro as `$1', `$2', etc. *Note How to define new macros: (m4.info)Definitions, for more complete information on writing M4 macros. Most macros fall in one of two general categories. The first category includes macros which take arguments, in order to generate output parameterized by those arguments. Macros in this category are designed to be directly expanded, often multiple times, and should not be used as the argument to `AC_REQUIRE'. The other category includes macros which are shorthand for a fixed block of text, and therefore do not take arguments. For this category of macros, directly expanding the macro multiple times results in redundant output, so it is more common to use the macro as the argument to `AC_REQUIRE', or to declare the macro with `AC_DEFUN_ONCE' (*note One-Shot Macros::). Be sure to properly quote both the MACRO-BODY _and_ the MACRO-NAME to avoid any problems if the macro happens to have been previously defined. Each macro should have a header comment that gives its prototype, and a brief description. When arguments have default values, display them in the prototype. For example: # AC_MSG_ERROR(ERROR, [EXIT-STATUS = 1]) # -------------------------------------- m4_define([AC_MSG_ERROR], [{ AS_MESSAGE([error: $1], [2]) exit m4_default([$2], [1]); }]) Comments about the macro should be left in the header comment. Most other comments make their way into `configure', so just keep using `#' to introduce comments. If you have some special comments about pure M4 code, comments that make no sense in `configure' and in the header comment, then use the builtin `dnl': it causes M4 to discard the text through the next newline. Keep in mind that `dnl' is rarely needed to introduce comments; `dnl' is more useful to get rid of the newlines following macros that produce no output, such as `AC_REQUIRE'. Public third-party macros need to use `AC_DEFUN', and not `m4_define', in order to be found by `aclocal' (*note Extending aclocal: (automake)Extending aclocal.). Additionally, if it is ever determined that a macro should be made obsolete, it is easy to convert from `AC_DEFUN' to `AU_DEFUN' in order to have `autoupdate' assist the user in choosing a better alternative, but there is no corresponding way to make `m4_define' issue an upgrade notice (*note AU_DEFUN::). There is another subtle, but important, difference between using `m4_define' and `AC_DEFUN': only the former is unaffected by `AC_REQUIRE'. When writing a file, it is always safe to replace a block of text with a `m4_define' macro that will expand to the same text. But replacing a block of text with an `AC_DEFUN' macro with the same content does not necessarily give the same results, because it changes the location where any embedded but unsatisfied `AC_REQUIRE' invocations within the block will be expanded. For an example of this, see *note Expanded Before Required::.  File: autoconf.info, Node: Macro Names, Next: Reporting Messages, Prev: Macro Definitions, Up: Writing Autoconf Macros 10.2 Macro Names ================ All of the public Autoconf macros have all-uppercase names in the namespace `^AC_' to prevent them from accidentally conflicting with other text; Autoconf also reserves the namespace `^_AC_' for internal macros. All shell variables that they use for internal purposes have mostly-lowercase names starting with `ac_'. Autoconf also uses here-document delimiters in the namespace `^_AC[A-Z]'. During `configure', files produced by Autoconf make heavy use of the file system namespace `^conf'. Since Autoconf is built on top of M4sugar (*note Programming in M4sugar::) and M4sh (*note Programming in M4sh::), you must also be aware of those namespaces (`^_?\(m4\|AS\)_'). And since `configure.ac' is also designed to be scanned by Autoheader, Autoscan, Autoupdate, and Automake, you should be aware of the `^_?A[HNUM]_' namespaces. In general, you _should not use_ the namespace of a package that does not own the macro or shell code you are writing. To ensure that your macros don't conflict with present or future Autoconf macros, you should prefix your own macro names and any shell variables they use with some other sequence. Possibilities include your initials, or an abbreviation for the name of your organization or software package. Historically, people have not always followed the rule of using a namespace appropriate for their package, and this has made it difficult for determining the origin of a macro (and where to report bugs about that macro), as well as difficult for the true namespace owner to add new macros without interference from pre-existing uses of third-party macros. Perhaps the best example of this confusion is the `AM_GNU_GETTEXT' macro, which belongs, not to Automake, but to Gettext. Most of the Autoconf macros' names follow a structured naming convention that indicates the kind of feature check by the name. The macro names consist of several words, separated by underscores, going from most general to most specific. The names of their cache variables use the same convention (*note Cache Variable Names::, for more information on them). The first word of the name after the namespace initials (such as `AC_') usually tells the category of the feature being tested. Here are the categories used in Autoconf for specific test macros, the kind of macro that you are more likely to write. They are also used for cache variables, in all-lowercase. Use them where applicable; where they're not, invent your own categories. `C' C language builtin features. `DECL' Declarations of C variables in header files. `FUNC' Functions in libraries. `GROUP' Posix group owners of files. `HEADER' Header files. `LIB' C libraries. `PROG' The base names of programs. `MEMBER' Members of aggregates. `SYS' Operating system features. `TYPE' C builtin or declared types. `VAR' C variables in libraries. After the category comes the name of the particular feature being tested. Any further words in the macro name indicate particular aspects of the feature. For example, `AC_PROG_CC_STDC' checks whether the C compiler supports ISO Standard C. An internal macro should have a name that starts with an underscore; Autoconf internals should therefore start with `_AC_'. Additionally, a macro that is an internal subroutine of another macro should have a name that starts with an underscore and the name of that other macro, followed by one or more words saying what the internal macro does. For example, `AC_PATH_X' has internal macros `_AC_PATH_X_XMKMF' and `_AC_PATH_X_DIRECT'.  File: autoconf.info, Node: Reporting Messages, Next: Dependencies Between Macros, Prev: Macro Names, Up: Writing Autoconf Macros 10.3 Reporting Messages ======================= When macros statically diagnose abnormal situations, benign or fatal, it is possible to make `autoconf' detect the problem, and refuse to create `configure' in the case of an error. The macros in this section are considered obsolescent, and new code should use M4sugar macros for this purpose, see *note Diagnostic Macros::. On the other hand, it is possible to want to detect errors when `configure' is run, which are dependent on the environment of the user rather than the maintainer. For dynamic diagnostics, see *note Printing Messages::. -- Macro: AC_DIAGNOSE (CATEGORY, MESSAGE) Report MESSAGE as a warning (or as an error if requested by the user) if warnings of the CATEGORY are turned on. This macro is obsolescent; you are encouraged to use: m4_warn([CATEGORY], [MESSAGE]) instead. *Note m4_warn::, for more details, including valid CATEGORY names. -- Macro: AC_WARNING (MESSAGE) Report MESSAGE as a syntax warning. This macro is obsolescent; you are encouraged to use: m4_warn([syntax], [MESSAGE]) instead. *Note m4_warn::, for more details, as well as better finer-grained categories of warnings (not all problems have to do with syntax). -- Macro: AC_FATAL (MESSAGE) Report a severe error MESSAGE, and have `autoconf' die. This macro is obsolescent; you are encouraged to use: m4_fatal([MESSAGE]) instead. *Note m4_fatal::, for more details. When the user runs `autoconf -W error', warnings from `m4_warn' (including those issued through `AC_DIAGNOSE' and `AC_WARNING') are reported as errors, see *note autoconf Invocation::.  File: autoconf.info, Node: Dependencies Between Macros, Next: Obsoleting Macros, Prev: Reporting Messages, Up: Writing Autoconf Macros 10.4 Dependencies Between Macros ================================ Some Autoconf macros depend on other macros having been called first in order to work correctly. Autoconf provides a way to ensure that certain macros are called if needed and a way to warn the user if macros are called in an order that might cause incorrect operation. * Menu: * Prerequisite Macros:: Ensuring required information * Suggested Ordering:: Warning about possible ordering problems * One-Shot Macros:: Ensuring a macro is called only once  File: autoconf.info, Node: Prerequisite Macros, Next: Suggested Ordering, Up: Dependencies Between Macros 10.4.1 Prerequisite Macros -------------------------- A macro that you write might need to use values that have previously been computed by other macros. For example, `AC_DECL_YYTEXT' examines the output of `flex' or `lex', so it depends on `AC_PROG_LEX' having been called first to set the shell variable `LEX'. Rather than forcing the user of the macros to keep track of the dependencies between them, you can use the `AC_REQUIRE' macro to do it automatically. `AC_REQUIRE' can ensure that a macro is only called if it is needed, and only called once. -- Macro: AC_REQUIRE (MACRO-NAME) If the M4 macro MACRO-NAME has not already been called, call it (without any arguments). Make sure to quote MACRO-NAME with square brackets. MACRO-NAME must have been defined using `AC_DEFUN' or else contain a call to `AC_PROVIDE' to indicate that it has been called. `AC_REQUIRE' must be used inside a macro defined by `AC_DEFUN'; it must not be called from the top level. Also, it does not make sense to require a macro that takes parameters. `AC_REQUIRE' is often misunderstood. It really implements dependencies between macros in the sense that if one macro depends upon another, the latter is expanded _before_ the body of the former. To be more precise, the required macro is expanded before the outermost defined macro in the current expansion stack. In particular, `AC_REQUIRE([FOO])' is not replaced with the body of `FOO'. For instance, this definition of macros: AC_DEFUN([TRAVOLTA], [test "$body_temperature_in_celsius" -gt "38" && dance_floor=occupied]) AC_DEFUN([NEWTON_JOHN], [test "x$hair_style" = xcurly && dance_floor=occupied]) AC_DEFUN([RESERVE_DANCE_FLOOR], [if date | grep '^Sat.*pm' >/dev/null 2>&1; then AC_REQUIRE([TRAVOLTA]) AC_REQUIRE([NEWTON_JOHN]) fi]) with this `configure.ac' AC_INIT([Dance Manager], [1.0], [bug-dance@example.org]) RESERVE_DANCE_FLOOR if test "x$dance_floor" = xoccupied; then AC_MSG_ERROR([cannot pick up here, let's move]) fi does not leave you with a better chance to meet a kindred soul at other times than Saturday night since it expands into: test "$body_temperature_in_Celsius" -gt "38" && dance_floor=occupied test "x$hair_style" = xcurly && dance_floor=occupied fi if date | grep '^Sat.*pm' >/dev/null 2>&1; then fi This behavior was chosen on purpose: (i) it prevents messages in required macros from interrupting the messages in the requiring macros; (ii) it avoids bad surprises when shell conditionals are used, as in: if ...; then AC_REQUIRE([SOME_CHECK]) fi ... SOME_CHECK However, this implementation can lead to another class of problems. Consider the case where an outer macro first expands, then indirectly requires, an inner macro: AC_DEFUN([TESTA], [[echo in A if test -n "$SEEN_A" ; then echo duplicate ; fi SEEN_A=:]]) AC_DEFUN([TESTB], [AC_REQUIRE([TESTA])[echo in B if test -z "$SEEN_A" ; then echo bug ; fi]]) AC_DEFUN([TESTC], [AC_REQUIRE([TESTB])[echo in C]]) AC_DEFUN([OUTER], [[echo in OUTER] TESTA TESTC]) OUTER Prior to Autoconf 2.64, the implementation of `AC_REQUIRE' recognized that `TESTB' needed to be hoisted prior to the expansion of `OUTER', but because `TESTA' had already been directly expanded, it failed to hoist `TESTA'. Therefore, the expansion of `TESTB' occurs prior to its prerequisites, leading to the following output: in B bug in OUTER in A in C Newer Autoconf is smart enough to recognize this situation, and hoists `TESTA' even though it has already been expanded, but issues a syntax warning in the process. This is because the hoisted expansion of `TESTA' defeats the purpose of using `AC_REQUIRE' to avoid redundant code, and causes its own set of problems if the hoisted macro is not idempotent: in A in B in OUTER in A duplicate in C The bug is not in Autoconf, but in the macro definitions. If you ever pass a particular macro name to `AC_REQUIRE', then you are implying that the macro only needs to be expanded once. But to enforce this, either the macro must be declared with `AC_DEFUN_ONCE' (although this only helps in Autoconf 2.64 or newer), or all uses of that macro should be through `AC_REQUIRE'; directly expanding the macro defeats the point of using `AC_REQUIRE' to eliminate redundant expansion. In the example, this rule of thumb was violated because `TESTB' requires `TESTA' while `OUTER' directly expands it. One way of fixing the bug is to factor `TESTA' into two macros, the portion designed for direct and repeated use (here, named `TESTA'), and the portion designed for one-shot output and used only inside `AC_REQUIRE' (here, named `TESTA_PREREQ'). Then, by fixing all clients to use the correct calling convention according to their needs: AC_DEFUN([TESTA], [AC_REQUIRE([TESTA_PREREQ])[echo in A]]) AC_DEFUN([TESTA_PREREQ], [[echo in A_PREREQ if test -n "$SEEN_A" ; then echo duplicate ; fi SEEN_A=:]]) AC_DEFUN([TESTB], [AC_REQUIRE([TESTA_PREREQ])[echo in B if test -z "$SEEN_A" ; then echo bug ; fi]]) AC_DEFUN([TESTC], [AC_REQUIRE([TESTB])[echo in C]]) AC_DEFUN([OUTER], [[echo in OUTER] TESTA TESTC]) OUTER the resulting output will then obey all dependency rules and avoid any syntax warnings, whether the script is built with old or new Autoconf versions: in A_PREREQ in B in OUTER in A in C The helper macros `AS_IF' and `AS_CASE' may be used to enforce expansion of required macros outside of shell conditional constructs. You are furthermore encouraged, although not required, to put all `AC_REQUIRE' calls at the beginning of a macro. You can use `dnl' to avoid the empty lines they leave.  File: autoconf.info, Node: Suggested Ordering, Next: One-Shot Macros, Prev: Prerequisite Macros, Up: Dependencies Between Macros 10.4.2 Suggested Ordering ------------------------- Some macros should be run before another macro if both are called, but neither _requires_ that the other be called. For example, a macro that changes the behavior of the C compiler should be called before any macros that run the C compiler. Many of these dependencies are noted in the documentation. Autoconf provides the `AC_BEFORE' macro to warn users when macros with this kind of dependency appear out of order in a `configure.ac' file. The warning occurs when creating `configure' from `configure.ac', not when running `configure'. For example, `AC_PROG_CPP' checks whether the C compiler can run the C preprocessor when given the `-E' option. It should therefore be called after any macros that change which C compiler is being used, such as `AC_PROG_CC'. So `AC_PROG_CC' contains: AC_BEFORE([$0], [AC_PROG_CPP])dnl This warns the user if a call to `AC_PROG_CPP' has already occurred when `AC_PROG_CC' is called. -- Macro: AC_BEFORE (THIS-MACRO-NAME, CALLED-MACRO-NAME) Make M4 print a warning message to the standard error output if CALLED-MACRO-NAME has already been called. THIS-MACRO-NAME should be the name of the macro that is calling `AC_BEFORE'. The macro CALLED-MACRO-NAME must have been defined using `AC_DEFUN' or else contain a call to `AC_PROVIDE' to indicate that it has been called.  File: autoconf.info, Node: One-Shot Macros, Prev: Suggested Ordering, Up: Dependencies Between Macros 10.4.3 One-Shot Macros ---------------------- Some macros should be called only once, either because calling them multiple time is unsafe, or because it is bad style. For instance Autoconf ensures that `AC_CANONICAL_BUILD' and cousins (*note Canonicalizing::) are evaluated only once, because it makes no sense to run these expensive checks more than once. Such one-shot macros can be defined using `AC_DEFUN_ONCE'. -- Macro: AC_DEFUN_ONCE (MACRO-NAME, MACRO-BODY) Declare macro MACRO-NAME like `AC_DEFUN' would (*note Macro Definitions::), but add additional logic that guarantees that only the first use of the macro (whether by direct expansion or `AC_REQUIRE') causes an expansion of MACRO-BODY; the expansion will occur before the start of any enclosing macro defined by `AC_DEFUN'. Subsequent expansions are silently ignored. Generally, it does not make sense for MACRO-BODY to use parameters such as `$1'. Prior to Autoconf 2.64, a macro defined by `AC_DEFUN_ONCE' would emit a warning if it was directly expanded a second time, so for portability, it is better to use `AC_REQUIRE' than direct invocation of MACRO-NAME inside a macro defined by `AC_DEFUN' (*note Prerequisite Macros::).  File: autoconf.info, Node: Obsoleting Macros, Next: Coding Style, Prev: Dependencies Between Macros, Up: Writing Autoconf Macros 10.5 Obsoleting Macros ====================== Configuration and portability technology has evolved over the years. Often better ways of solving a particular problem are developed, or ad-hoc approaches are systematized. This process has occurred in many parts of Autoconf. One result is that some of the macros are now considered "obsolete"; they still work, but are no longer considered the best thing to do, hence they should be replaced with more modern macros. Ideally, `autoupdate' should replace the old macro calls with their modern implementation. Autoconf provides a simple means to obsolete a macro. -- Macro: AU_DEFUN (OLD-MACRO, IMPLEMENTATION, [MESSAGE]) Define OLD-MACRO as IMPLEMENTATION. The only difference with `AC_DEFUN' is that the user is warned that OLD-MACRO is now obsolete. If she then uses `autoupdate', the call to OLD-MACRO is replaced by the modern IMPLEMENTATION. MESSAGE should include information on what to do after running `autoupdate'; `autoupdate' prints it as a warning, and includes it in the updated `configure.ac' file. The details of this macro are hairy: if `autoconf' encounters an `AU_DEFUN'ed macro, all macros inside its second argument are expanded as usual. However, when `autoupdate' is run, only M4 and M4sugar macros are expanded here, while all other macros are disabled and appear literally in the updated `configure.ac'. -- Macro: AU_ALIAS (OLD-NAME, NEW-NAME) Used if the OLD-NAME is to be replaced by a call to NEW-MACRO with the same parameters. This happens for example if the macro was renamed.  File: autoconf.info, Node: Coding Style, Prev: Obsoleting Macros, Up: Writing Autoconf Macros 10.6 Coding Style ================= The Autoconf macros follow a strict coding style. You are encouraged to follow this style, especially if you intend to distribute your macro, either by contributing it to Autoconf itself or the Autoconf Macro Archive (http://www.gnu.org/software/autoconf-archive/), or by other means. The first requirement is to pay great attention to the quotation. For more details, see *note Autoconf Language::, and *note M4 Quotation::. Do not try to invent new interfaces. It is likely that there is a macro in Autoconf that resembles the macro you are defining: try to stick to this existing interface (order of arguments, default values, etc.). We _are_ conscious that some of these interfaces are not perfect; nevertheless, when harmless, homogeneity should be preferred over creativity. Be careful about clashes both between M4 symbols and between shell variables. If you stick to the suggested M4 naming scheme (*note Macro Names::), you are unlikely to generate conflicts. Nevertheless, when you need to set a special value, _avoid using a regular macro name_; rather, use an "impossible" name. For instance, up to version 2.13, the macro `AC_SUBST' used to remember what SYMBOL macros were already defined by setting `AC_SUBST_SYMBOL', which is a regular macro name. But since there is a macro named `AC_SUBST_FILE', it was just impossible to `AC_SUBST(FILE)'! In this case, `AC_SUBST(SYMBOL)' or `_AC_SUBST(SYMBOL)' should have been used (yes, with the parentheses). No Autoconf macro should ever enter the user-variable name space; i.e., except for the variables that are the actual result of running the macro, all shell variables should start with `ac_'. In addition, small macros or any macro that is likely to be embedded in other macros should be careful not to use obvious names. Do not use `dnl' to introduce comments: most of the comments you are likely to write are either header comments which are not output anyway, or comments that should make their way into `configure'. There are exceptional cases where you do want to comment special M4 constructs, in which case `dnl' is right, but keep in mind that it is unlikely. M4 ignores the leading blanks and newlines before each argument. Use this feature to indent in such a way that arguments are (more or less) aligned with the opening parenthesis of the macro being called. For instance, instead of AC_CACHE_CHECK(for EMX OS/2 environment, ac_cv_emxos2, [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(, [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) write AC_CACHE_CHECK([for EMX OS/2 environment], [ac_cv_emxos2], [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) or even AC_CACHE_CHECK([for EMX OS/2 environment], [ac_cv_emxos2], [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) When using `AC_RUN_IFELSE' or any macro that cannot work when cross-compiling, provide a pessimistic value (typically `no'). Feel free to use various tricks to prevent auxiliary tools, such as syntax-highlighting editors, from behaving improperly. For instance, instead of: m4_bpatsubst([$1], [$"]) use m4_bpatsubst([$1], [$""]) so that Emacsen do not open an endless "string" at the first quote. For the same reasons, avoid: test $[#] != 0 and use: test $[@%:@] != 0 Otherwise, the closing bracket would be hidden inside a `#'-comment, breaking the bracket-matching highlighting from Emacsen. Note the preferred style to escape from M4: `$[1]', `$[@]', etc. Do not escape when it is unnecessary. Common examples of useless quotation are `[$]$1' (write `$$1'), `[$]var' (use `$var'), etc. If you add portability issues to the picture, you'll prefer `${1+"$[@]"}' to `"[$]@"', and you'll prefer do something better than hacking Autoconf `:-)'. When using `sed', don't use `-e' except for indenting purposes. With the `s' and `y' commands, the preferred separator is `/' unless `/' itself might appear in the pattern or replacement, in which case you should use `|', or optionally `,' if you know the pattern and replacement cannot contain a file name. If none of these characters will do, choose a printable character that cannot appear in the pattern or replacement. Characters from the set `"#$&'()*;<=>?`|~' are good choices if the pattern or replacement might contain a file name, since they have special meaning to the shell and are less likely to occur in file names. *Note Macro Definitions::, for details on how to define a macro. If a macro doesn't use `AC_REQUIRE', is expected to never be the object of an `AC_REQUIRE' directive, and macros required by other macros inside arguments do not need to be expanded before this macro, then use `m4_define'. In case of doubt, use `AC_DEFUN'. Also take into account that public third-party macros need to use `AC_DEFUN' in order to be found by `aclocal' (*note Extending aclocal: (automake)Extending aclocal.). All the `AC_REQUIRE' statements should be at the beginning of the macro, and each statement should be followed by `dnl'. You should not rely on the number of arguments: instead of checking whether an argument is missing, test that it is not empty. It provides both a simpler and a more predictable interface to the user, and saves room for further arguments. Unless the macro is short, try to leave the closing `])' at the beginning of a line, followed by a comment that repeats the name of the macro being defined. This introduces an additional newline in `configure'; normally, that is not a problem, but if you want to remove it you can use `[]dnl' on the last line. You can similarly use `[]dnl' after a macro call to remove its newline. `[]dnl' is recommended instead of `dnl' to ensure that M4 does not interpret the `dnl' as being attached to the preceding text or macro output. For example, instead of: AC_DEFUN([AC_PATH_X], [AC_MSG_CHECKING([for X]) AC_REQUIRE_CPP() # ...omitted... AC_MSG_RESULT([libraries $x_libraries, headers $x_includes]) fi]) you would write: AC_DEFUN([AC_PATH_X], [AC_REQUIRE_CPP()[]dnl AC_MSG_CHECKING([for X]) # ...omitted... AC_MSG_RESULT([libraries $x_libraries, headers $x_includes]) fi[]dnl ])# AC_PATH_X If the macro is long, try to split it into logical chunks. Typically, macros that check for a bug in a function and prepare its `AC_LIBOBJ' replacement should have an auxiliary macro to perform this setup. Do not hesitate to introduce auxiliary macros to factor your code. In order to highlight the recommended coding style, here is a macro written the old way: dnl Check for EMX on OS/2. dnl _AC_EMXOS2 AC_DEFUN(_AC_EMXOS2, [AC_CACHE_CHECK(for EMX OS/2 environment, ac_cv_emxos2, [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(, return __EMX__;)], ac_cv_emxos2=yes, ac_cv_emxos2=no)]) test "x$ac_cv_emxos2" = xyes && EMXOS2=yes]) and the new way: # _AC_EMXOS2 # ---------- # Check for EMX on OS/2. m4_define([_AC_EMXOS2], [AC_CACHE_CHECK([for EMX OS/2 environment], [ac_cv_emxos2], [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) test "x$ac_cv_emxos2" = xyes && EMXOS2=yes[]dnl ])# _AC_EMXOS2  File: autoconf.info, Node: Portable Shell, Next: Portable Make, Prev: Writing Autoconf Macros, Up: Top 11 Portable Shell Programming ***************************** When writing your own checks, there are some shell-script programming techniques you should avoid in order to make your code portable. The Bourne shell and upward-compatible shells like the Korn shell and Bash have evolved over the years, and many features added to the original System7 shell are now supported on all interesting porting targets. However, the following discussion between Russ Allbery and Robert Lipe is worth reading: Russ Allbery: The GNU assumption that `/bin/sh' is the one and only shell leads to a permanent deadlock. Vendors don't want to break users' existing shell scripts, and there are some corner cases in the Bourne shell that are not completely compatible with a Posix shell. Thus, vendors who have taken this route will _never_ (OK..."never say never") replace the Bourne shell (as `/bin/sh') with a Posix shell. Robert Lipe: This is exactly the problem. While most (at least most System V's) do have a Bourne shell that accepts shell functions most vendor `/bin/sh' programs are not the Posix shell. So while most modern systems do have a shell _somewhere_ that meets the Posix standard, the challenge is to find it. For this reason, part of the job of M4sh (*note Programming in M4sh::) is to find such a shell. But to prevent trouble, if you're not using M4sh you should not take advantage of features that were added after Unix version 7, circa 1977 (*note Systemology::); you should not use aliases, negated character classes, or even `unset'. `#' comments, while not in Unix version 7, were retrofitted in the original Bourne shell and can be assumed to be part of the least common denominator. On the other hand, if you're using M4sh you can assume that the shell has the features that were added in SVR2 (circa 1984), including shell functions, `return', `unset', and I/O redirection for builtins. For more information, refer to `http://www.in-ulm.de/~mascheck/bourne/'. However, some pitfalls have to be avoided for portable use of these constructs; these will be documented in the rest of this chapter. See in particular *note Shell Functions:: and *note Limitations of Shell Builtins: Limitations of Builtins. Some ancient systems have quite small limits on the length of the `#!' line; for instance, 32 bytes (not including the newline) on SunOS 4. However, these ancient systems are no longer of practical concern. The set of external programs you should run in a `configure' script is fairly small. *Note Utilities in Makefiles: (standards)Utilities in Makefiles, for the list. This restriction allows users to start out with a fairly small set of programs and build the rest, avoiding too many interdependencies between packages. Some of these external utilities have a portable subset of features; see *note Limitations of Usual Tools::. There are other sources of documentation about shells. The specification for the Posix Shell Command Language (http://www.opengroup.org/susv3/utilities/xcu_chap02.html), though more generous than the restrictive shell subset described above, is fairly portable nowadays. Also please see the Shell FAQs (http://www.faqs.org/faqs/unix-faq/shell/). * Menu: * Shellology:: A zoology of shells * Invoking the Shell:: Invoking the shell as a command * Here-Documents:: Quirks and tricks * File Descriptors:: FDs and redirections * Signal Handling:: Shells, signals, and headaches * File System Conventions:: File names * Shell Pattern Matching:: Pattern matching * Shell Substitutions:: Variable and command expansions * Assignments:: Varying side effects of assignments * Parentheses:: Parentheses in shell scripts * Slashes:: Slashes in shell scripts * Special Shell Variables:: Variables you should not change * Shell Functions:: What to look out for if you use them * Limitations of Builtins:: Portable use of not so portable /bin/sh * Limitations of Usual Tools:: Portable use of portable tools  File: autoconf.info, Node: Shellology, Next: Invoking the Shell, Up: Portable Shell 11.1 Shellology =============== There are several families of shells, most prominently the Bourne family and the C shell family which are deeply incompatible. If you want to write portable shell scripts, avoid members of the C shell family. The the Shell difference FAQ (http://www.faqs.org/faqs/unix-faq/shell/shell-differences/) includes a small history of Posix shells, and a comparison between several of them. Below we describe some of the members of the Bourne shell family. Ash Ash is often used on GNU/Linux and BSD systems as a light-weight Bourne-compatible shell. Ash 0.2 has some bugs that are fixed in the 0.3.x series, but portable shell scripts should work around them, since version 0.2 is still shipped with many GNU/Linux distributions. To be compatible with Ash 0.2: - don't use `$?' after expanding empty or unset variables, or at the start of an `eval': foo= false $foo echo "Do not use it: $?" false eval 'echo "Do not use it: $?"' - don't use command substitution within variable expansion: cat ${FOO=`bar`} - beware that single builtin substitutions are not performed by a subshell, hence their effect applies to the current shell! *Note Shell Substitutions::, item "Command Substitution". Bash To detect whether you are running Bash, test whether `BASH_VERSION' is set. To require Posix compatibility, run `set -o posix'. *Note Bash Posix Mode: (bash)Bash POSIX Mode, for details. Bash 2.05 and later Versions 2.05 and later of Bash use a different format for the output of the `set' builtin, designed to make evaluating its output easier. However, this output is not compatible with earlier versions of Bash (or with many other shells, probably). So if you use Bash 2.05 or higher to execute `configure', you'll need to use Bash 2.05 for all other build tasks as well. Ksh The Korn shell is compatible with the Bourne family and it mostly conforms to Posix. It has two major variants commonly called `ksh88' and `ksh93', named after the years of initial release. It is usually called `ksh', but is called `sh' on some hosts if you set your path appropriately. Solaris systems have three variants: `/usr/bin/ksh' is `ksh88'; it is standard on Solaris 2.0 and later. `/usr/xpg4/bin/sh' is a Posix-compliant variant of `ksh88'; it is standard on Solaris 9 and later. `/usr/dt/bin/dtksh' is `ksh93'. Variants that are not standard may be parts of optional packages. There is no extra charge for these packages, but they are not part of a minimal OS install and therefore some installations may not have it. Starting with Tru64 Version 4.0, the Korn shell `/usr/bin/ksh' is also available as `/usr/bin/posix/sh'. If the environment variable `BIN_SH' is set to `xpg4', subsidiary invocations of the standard shell conform to Posix. Pdksh A public-domain clone of the Korn shell called `pdksh' is widely available: it has most of the `ksh88' features along with a few of its own. It usually sets `KSH_VERSION', except if invoked as `/bin/sh' on OpenBSD, and similarly to Bash you can require Posix compatibility by running `set -o posix'. Unfortunately, with `pdksh' 5.2.14 (the latest stable version as of January 2007) Posix mode is buggy and causes `pdksh' to depart from Posix in at least one respect, see *note Shell Substitutions::. Zsh To detect whether you are running `zsh', test whether `ZSH_VERSION' is set. By default `zsh' is _not_ compatible with the Bourne shell: you must execute `emulate sh', and for `zsh' versions before 3.1.6-dev-18 you must also set `NULLCMD' to `:'. *Note Compatibility: (zsh)Compatibility, for details. The default Mac OS X `sh' was originally Zsh; it was changed to Bash in Mac OS X 10.2.  File: autoconf.info, Node: Invoking the Shell, Next: Here-Documents, Prev: Shellology, Up: Portable Shell 11.2 Invoking the Shell ======================= The Korn shell (up to at least version M-12/28/93d) has a bug when invoked on a file whose name does not contain a slash. It first searches for the file's name in `PATH', and if found it executes that rather than the original file. For example, assuming there is a binary executable `/usr/bin/script' in your `PATH', the last command in the following example fails because the Korn shell finds `/usr/bin/script' and refuses to execute it as a shell script: $ touch xxyzzyz script $ ksh xxyzzyz $ ksh ./script $ ksh script ksh: script: cannot execute Bash 2.03 has a bug when invoked with the `-c' option: if the option-argument ends in backslash-newline, Bash incorrectly reports a syntax error. The problem does not occur if a character follows the backslash: $ $ bash -c 'echo foo \ > ' bash: -c: line 2: syntax error: unexpected end of file $ bash -c 'echo foo \ > ' foo *Note Backslash-Newline-Empty::, for how this can cause problems in makefiles.  File: autoconf.info, Node: Here-Documents, Next: File Descriptors, Prev: Invoking the Shell, Up: Portable Shell 11.3 Here-Documents =================== Don't rely on `\' being preserved just because it has no special meaning together with the next symbol. In the native `sh' on OpenBSD 2.7 `\"' expands to `"' in here-documents with unquoted delimiter. As a general rule, if `\\' expands to `\' use `\\' to get `\'. With OpenBSD 2.7's `sh' $ cat < \" \\ > EOF " \ and with Bash: bash-2.04$ cat < \" \\ > EOF \" \ Using command substitutions in a here-document that is fed to a shell function is not portable. For example, with Solaris 10 `/bin/sh': $ kitty () { cat; } $ kitty < `echo ok` > EOF /tmp/sh199886: cannot open $ echo $? 1 Some shells mishandle large here-documents: for example, Solaris 10 `dtksh' and the UnixWare 7.1.1 Posix shell, which are derived from Korn shell version M-12/28/93d, mishandle braced variable expansion that crosses a 1024- or 4096-byte buffer boundary within a here-document. Only the part of the variable name after the boundary is used. For example, `${variable}' could be replaced by the expansion of `${ble}'. If the end of the variable name is aligned with the block boundary, the shell reports an error, as if you used `${}'. Instead of `${variable-default}', the shell may expand `${riable-default}', or even `${fault}'. This bug can often be worked around by omitting the braces: `$variable'. The bug was fixed in `ksh93g' (1998-04-30) but as of 2006 many operating systems were still shipping older versions with the bug. Empty here-documents are not portable either; with the following code, `zsh' up to at least version 4.3.10 creates a file with a single newline, whereas other shells create an empty file: cat >file <; then assume this and that else check this check that check something else ... on and on forever ... fi A shell parses the whole `if'/`fi' construct, creating temporary files for each here-document in it. Some shells create links for such here-documents on every `fork', so that the clean-up code they had installed correctly removes them. It is creating the links that can take the shell forever. Moving the tests out of the `if'/`fi', or creating multiple `if'/`fi' constructs, would improve the performance significantly. Anyway, this kind of construct is not exactly the typical use of Autoconf. In fact, it's even not recommended, because M4 macros can't look into shell conditionals, so we may fail to expand a macro when it was expanded before in a conditional path, and the condition turned out to be false at runtime, and we end up not executing the macro at all. Be careful with the use of `<<-' to unindent here-documents. The behavior is only portable for stripping leading s, and things can silently break if an overzealous editor converts to using leading spaces (not all shells are nice enough to warn about unterminated here-documents). $ printf 'cat <<-x\n\t1\n\t 2\n\tx\n' | bash && echo done 1 2 done $ printf 'cat <<-x\n 1\n 2\n x\n' | bash-3.2 && echo done 1 2 x done  File: autoconf.info, Node: File Descriptors, Next: Signal Handling, Prev: Here-Documents, Up: Portable Shell 11.4 File Descriptors ===================== Most shells, if not all (including Bash, Zsh, Ash), output traces on stderr, even for subshells. This might result in undesirable content if you meant to capture the standard-error output of the inner command: $ ash -x -c '(eval "echo foo >&2") 2>stderr' $ cat stderr + eval echo foo >&2 + echo foo foo $ bash -x -c '(eval "echo foo >&2") 2>stderr' $ cat stderr + eval 'echo foo >&2' ++ echo foo foo $ zsh -x -c '(eval "echo foo >&2") 2>stderr' # Traces on startup files deleted here. $ cat stderr +zsh:1> eval echo foo >&2 +zsh:1> echo foo foo One workaround is to grep out uninteresting lines, hoping not to remove good ones. If you intend to redirect both standard error and standard output, redirect standard output first. This works better with HP-UX, since its shell mishandles tracing if standard error is redirected first: $ sh -x -c ': 2>err >out' + : + 2> err $ cat err 1> out Don't try to redirect the standard error of a command substitution. It must be done _inside_ the command substitution. When running `: `cd /zorglub` 2>/dev/null' expect the error message to escape, while `: `cd /zorglub 2>/dev/null`' works properly. On the other hand, some shells, such as Solaris or FreeBSD `/bin/sh', warn about missing programs before performing redirections. Therefore, to silently check whether a program exists, it is necessary to perform redirections on a subshell or brace group: $ /bin/sh -c 'nosuch 2>/dev/null' nosuch: not found $ /bin/sh -c '(nosuch) 2>/dev/null' $ /bin/sh -c '{ nosuch; } 2>/dev/null' $ bash -c 'nosuch 2>/dev/null' FreeBSD 6.2 sh may mix the trace output lines from the statements in a shell pipeline. It is worth noting that Zsh (but not Ash nor Bash) makes it possible in assignments though: `foo=`cd /zorglub` 2>/dev/null'. Some shells, like `ash', don't recognize bi-directional redirection (`<>'). And even on shells that recognize it, it is not portable to use on fifos: Posix does not require read-write support for named pipes, and Cygwin does not support it: $ mkfifo fifo $ exec 5<>fifo $ echo hi >&5 bash: echo: write error: Communication error on send Furthermore, versions of `dash' before 0.5.6 mistakenly truncate regular files when using `<>': $ echo a > file $ bash -c ': 1<>file'; cat file a $ dash -c ': 1<>file'; cat file $ rm a When catering to old systems, don't redirect the same file descriptor several times, as you are doomed to failure under Ultrix. ULTRIX V4.4 (Rev. 69) System #31: Thu Aug 10 19:42:23 GMT 1995 UWS V4.4 (Rev. 11) $ eval 'echo matter >fullness' >void illegal io $ eval '(echo matter >fullness)' >void illegal io $ (eval '(echo matter >fullness)') >void Ambiguous output redirect. In each case the expected result is of course `fullness' containing `matter' and `void' being empty. However, this bug is probably not of practical concern to modern platforms. Solaris 10 `sh' will try to optimize away a `:' command (even if it is redirected) in a loop after the first iteration, or in a shell function after the first call: $ for i in 1 2 3 ; do : >x$i; done $ ls x* x1 $ f () { : >$1; }; f y1; f y2; f y3; $ ls y* y1 As a workaround, `echo' or `eval' can be used. Don't rely on file descriptors 0, 1, and 2 remaining closed in a subsidiary program. If any of these descriptors is closed, the operating system may open an unspecified file for the descriptor in the new process image. Posix 2008 says this may be done only if the subsidiary program is set-user-ID or set-group-ID, but HP-UX 11.23 does it even for ordinary programs, and the next version of Posix will allow HP-UX behavior. If you want a file descriptor above 2 to be inherited into a child process, then you must use redirections specific to that command or a containing subshell or command group, rather than relying on `exec' in the shell. In `ksh' as well as HP-UX `sh', file descriptors above 2 which are opened using `exec N>file' are closed by a subsequent `exec' (such as that involved in the fork-and-exec which runs a program or script): $ echo 'echo hello >&5' >k $ /bin/sh -c 'exec 5>t; ksh ./k; exec 5>&-; cat t hello $ bash -c 'exec 5>t; ksh ./k; exec 5>&-; cat t hello $ ksh -c 'exec 5>t; ksh ./k; exec 5>&-; cat t ./k[1]: 5: cannot open [Bad file number] $ ksh -c '(ksh ./k) 5>t; cat t' hello $ ksh -c '{ ksh ./k; } 5>t; cat t' hello $ ksh -c '5>t ksh ./k; cat t hello Don't rely on duplicating a closed file descriptor to cause an error. With Solaris `/bin/sh', failed duplication is silently ignored, which can cause unintended leaks to the original file descriptor. In this example, observe the leak to standard output: $ bash -c 'echo hi >&3' 3>&-; echo $? bash: 3: Bad file descriptor 1 $ /bin/sh -c 'echo hi >&3' 3>&-; echo $? hi 0 Fortunately, an attempt to close an already closed file descriptor will portably succeed. Likewise, it is safe to use either style of `N<&-' or `N>&-' for closing a file descriptor, even if it doesn't match the read/write mode that the file descriptor was opened with. DOS variants cannot rename or remove open files, such as in `mv foo bar >foo' or `rm foo >foo', even though this is perfectly portable among Posix hosts. A few ancient systems reserved some file descriptors. By convention, file descriptor 3 was opened to `/dev/tty' when you logged into Eighth Edition (1985) through Tenth Edition Unix (1989). File descriptor 4 had a special use on the Stardent/Kubota Titan (circa 1990), though we don't now remember what it was. Both these systems are obsolete, so it's now safe to treat file descriptors 3 and 4 like any other file descriptors. On the other hand, you can't portably use multi-digit file descriptors. Solaris `ksh' doesn't understand any file descriptor larger than `9': $ bash -c 'exec 10>&-'; echo $? 0 $ ksh -c 'exec 9>&-'; echo $? 0 $ ksh -c 'exec 10>&-'; echo $? ksh[1]: exec: 10: not found 127  File: autoconf.info, Node: Signal Handling, Next: File System Conventions, Prev: File Descriptors, Up: Portable Shell 11.5 Signal Handling ==================== Portable handling of signals within the shell is another major source of headaches. This is worsened by the fact that various different, mutually incompatible approaches are possible in this area, each with its distinctive merits and demerits. A detailed description of these possible approaches, as well as of their pros and cons, can be found in this article (http://www.cons.org/cracauer/sigint.html). Solaris 10 `/bin/sh' automatically traps most signals by default; the shell still exits with error upon termination by one of those signals, but in such a case the exit status might be somewhat unexpected (even if allowed by POSIX, strictly speaking): $ bash -c 'kill -1 $$'; echo $? # Will exit 128 + (signal number). Hangup 129 $ /bin/ksh -c 'kill -15 $$'; echo $? # Likewise. Terminated 143 $ for sig in 1 2 3 15; do > echo $sig: > /bin/sh -c "kill -$s \$\$"; echo $? > done signal 1: Hangup 129 signal 2: 208 signal 3: 208 signal 15: 208 This gets even worse if one is using the POSIX `wait' interface to get details about the shell process terminations: it will result in the shell having exited normally, rather than by receiving a signal. $ cat > foo.c <<'END' #include /* for printf */ #include /* for system */ #include /* for WIF* macros */ int main(void) { int status = system ("kill -15 $$"); printf ("Terminated by signal: %s\n", WIFSIGNALED (status) ? "yes" : "no"); printf ("Exited normally: %s\n", WIFEXITED (status) ? "yes" : "no"); return 0; } END $ cc -o foo foo.c $ ./a.out # On GNU/Linux Terminated by signal: no Exited normally: yes $ ./a.out # On Solaris 10 Terminated by signal: yes Exited normally: no Various shells seem to handle `SIGQUIT' specially: they ignore it even if it is not blocked, and even if the shell is not running interactively (in fact, even if the shell has no attached tty); among these shells are at least Bash (from version 2 onwards), Zsh 4.3.12, Solaris 10 `/bin/ksh' and `/usr/xpg4/bin/sh', and AT&T `ksh93' (2011). Still, `SIGQUIT' seems to be trappable quite portably within all these shells. OTOH, some other shells doesn't special-case the handling of `SIGQUIT'; among these shells are at least `pdksh' 5.2.14, Solaris 10 and NetBSD 5.1 `/bin/sh', and the Almquist Shell 0.5.5.1. Some shells (especially Korn shells and derivatives) might try to propagate to themselves a signal that has killed a child process; this is not a bug, but a conscious design choice (although its overall value might be debatable). The exact details of how this is attained vary from shell to shell. For example, upon running `perl -e 'kill 2, $$'', after the perl process has been interrupted AT&T `ksh93' (2011) will proceed to send itself a `SIGINT', while Solaris 10 `/bin/ksh' and `/usr/xpg4/bin/sh' will proceed to exit with status 130 (i.e., 128 + 2). In any case, if there is an active trap associated with `SIGINT', those shells will correctly execute it. Some Korn shells, when a child process die due receiving a signal with signal number N, can leave in `$?' an exit status of 256+N instead of the more common 128+N. Observe the difference between AT&T `ksh93' (2011) and `bash' 4.1.5 on Debian: $ /bin/ksh -c 'sh -c "kill -1 \$\$"; echo $?' /bin/ksh: line 1: 7837: Hangup 257 $ /bin/bash -c 'sh -c "kill -1 \$\$"; echo $?' /bin/bash: line 1: 7861 Hangup (sh -c "kill -1 \$\$") 129 This `ksh' behavior is allowed by POSIX, if implemented with due care; see this Austin Group discussion (http://www.austingroupbugs.net/view.php?id=51) for more background. However, if it is not implemented with proper care, such a behavior might cause problems in some corner cases. To see why, assume we have a "wrapper" script like this: #!/bin/sh # Ignore some signals in the shell only, not in its child processes. trap : 1 2 13 15 wrapped_command "$@" ret=$? other_command exit $ret If `wrapped_command' is interrupted by a `SIGHUP' (which has signal number 1), `ret' will be set to 257. Unless the `exit' shell builtin is smart enough to understand that such a value can only have originated from a signal, and adjust the final wait status of the shell appropriately, the value 257 will just get truncated to 1 by the closing `exit' call, so that a caller of the script will have no way to determine that termination by a signal was involved. Observe the different behavior of AT&T `ksh93' (2011) and `bash' 4.1.5 on Debian: $ cat foo.sh #!/bin/sh sh -c 'kill -1 $$' ret=$? echo $ret exit $ret $ /bin/ksh foo.sh; echo $? foo.sh: line 2: 12479: Hangup 257 1 $ /bin/bash foo.sh; echo $? foo.sh: line 2: 12487 Hangup (sh -c 'kill -1 $$') 129 129  File: autoconf.info, Node: File System Conventions, Next: Shell Pattern Matching, Prev: Signal Handling, Up: Portable Shell 11.6 File System Conventions ============================ Autoconf uses shell-script processing extensively, so the file names that it processes should not contain characters that are special to the shell. Special characters include space, tab, newline, NUL, and the following: " # $ & ' ( ) * ; < = > ? [ \ ` | Also, file names should not begin with `~' or `-', and should contain neither `-' immediately after `/' nor `~' immediately after `:'. On Posix-like platforms, directory names should not contain `:', as this runs afoul of `:' used as the path separator. These restrictions apply not only to the files that you distribute, but also to the absolute file names of your source, build, and destination directories. On some Posix-like platforms, `!' and `^' are special too, so they should be avoided. Posix lets implementations treat leading `//' specially, but requires leading `///' and beyond to be equivalent to `/'. Most Unix variants treat `//' like `/'. However, some treat `//' as a "super-root" that can provide access to files that are not otherwise reachable from `/'. The super-root tradition began with Apollo Domain/OS, which died out long ago, but unfortunately Cygwin has revived it. While `autoconf' and friends are usually run on some Posix variety, they can be used on other systems, most notably DOS variants. This impacts several assumptions regarding file names. For example, the following code: case $foo_dir in /*) # Absolute ;; *) foo_dir=$dots$foo_dir ;; esac fails to properly detect absolute file names on those systems, because they can use a drivespec, and usually use a backslash as directory separator. If you want to be portable to DOS variants (at the price of rejecting valid but oddball Posix file names like `a:\b'), you can check for absolute file names like this: case $foo_dir in [\\/]* | ?:[\\/]* ) # Absolute ;; *) foo_dir=$dots$foo_dir ;; esac Make sure you quote the brackets if appropriate and keep the backslash as first character (*note Limitations of Shell Builtins: case.). Also, because the colon is used as part of a drivespec, these systems don't use it as path separator. When creating or accessing paths, you can use the `PATH_SEPARATOR' output variable instead. `configure' sets this to the appropriate value for the build system (`:' or `;') when it starts up. File names need extra care as well. While DOS variants that are Posixy enough to run `autoconf' (such as DJGPP) are usually able to handle long file names properly, there are still limitations that can seriously break packages. Several of these issues can be easily detected by the doschk (ftp://ftp.gnu.org/gnu/non-gnu/doschk/doschk-1.1.tar.gz) package. A short overview follows; problems are marked with SFN/LFN to indicate where they apply: SFN means the issues are only relevant to plain DOS, not to DOS under Microsoft Windows variants, while LFN identifies problems that exist even under Microsoft Windows variants. No multiple dots (SFN) DOS cannot handle multiple dots in file names. This is an especially important thing to remember when building a portable configure script, as `autoconf' uses a .in suffix for template files. This is perfectly OK on Posix variants: AC_CONFIG_HEADERS([config.h]) AC_CONFIG_FILES([source.c foo.bar]) AC_OUTPUT but it causes problems on DOS, as it requires `config.h.in', `source.c.in' and `foo.bar.in'. To make your package more portable to DOS-based environments, you should use this instead: AC_CONFIG_HEADERS([config.h:config.hin]) AC_CONFIG_FILES([source.c:source.cin foo.bar:foobar.in]) AC_OUTPUT No leading dot (SFN) DOS cannot handle file names that start with a dot. This is usually not important for `autoconf'. Case insensitivity (LFN) DOS is case insensitive, so you cannot, for example, have both a file called `INSTALL' and a directory called `install'. This also affects `make'; if there's a file called `INSTALL' in the directory, `make install' does nothing (unless the `install' target is marked as PHONY). The 8+3 limit (SFN) Because the DOS file system only stores the first 8 characters of the file name and the first 3 of the extension, those must be unique. That means that `foobar-part1.c', `foobar-part2.c' and `foobar-prettybird.c' all resolve to the same file name (`FOOBAR-P.C'). The same goes for `foo.bar' and `foo.bartender'. The 8+3 limit is not usually a problem under Microsoft Windows, as it uses numeric tails in the short version of file names to make them unique. However, a registry setting can turn this behavior off. While this makes it possible to share file trees containing long file names between SFN and LFN environments, it also means the above problem applies there as well. Invalid characters (LFN) Some characters are invalid in DOS file names, and should therefore be avoided. In a LFN environment, these are `/', `\', `?', `*', `:', `<', `>', `|' and `"'. In a SFN environment, other characters are also invalid. These include `+', `,', `[' and `]'. Invalid names (LFN) Some DOS file names are reserved, and cause problems if you try to use files with those names. These names include `CON', `AUX', `COM1', `COM2', `COM3', `COM4', `LPT1', `LPT2', `LPT3', `NUL', and `PRN'. File names are case insensitive, so even names like `aux/config.guess' are disallowed.  File: autoconf.info, Node: Shell Pattern Matching, Next: Shell Substitutions, Prev: File System Conventions, Up: Portable Shell 11.7 Shell Pattern Matching =========================== Nowadays portable patterns can use negated character classes like `[!-aeiou]'. The older syntax `[^-aeiou]' is supported by some shells but not others; hence portable scripts should never use `^' as the first character of a bracket pattern. Outside the C locale, patterns like `[a-z]' are problematic since they may match characters that are not lower-case letters.  File: autoconf.info, Node: Shell Substitutions, Next: Assignments, Prev: Shell Pattern Matching, Up: Portable Shell 11.8 Shell Substitutions ======================== Contrary to a persistent urban legend, the Bourne shell does not systematically split variables and back-quoted expressions, in particular on the right-hand side of assignments and in the argument of `case'. For instance, the following code: case "$given_srcdir" in .) top_srcdir="`echo "$dots" | sed 's|/$||'`" ;; *) top_srcdir="$dots$given_srcdir" ;; esac is more readable when written as: case $given_srcdir in .) top_srcdir=`echo "$dots" | sed 's|/$||'` ;; *) top_srcdir=$dots$given_srcdir ;; esac and in fact it is even _more_ portable: in the first case of the first attempt, the computation of `top_srcdir' is not portable, since not all shells properly understand `"`..."..."...`"', for example Solaris 10 ksh: $ foo="`echo " bar" | sed 's, ,,'`" ksh: : cannot execute ksh: bar | sed 's, ,,': cannot execute Posix does not specify behavior for this sequence. On the other hand, behavior for `"`...\"...\"...`"' is specified by Posix, but in practice, not all shells understand it the same way: pdksh 5.2.14 prints spurious quotes when in Posix mode: $ echo "`echo \"hello\"`" hello $ set -o posix $ echo "`echo \"hello\"`" "hello" There is just no portable way to use double-quoted strings inside double-quoted back-quoted expressions (pfew!). Bash 4.1 has a bug where quoted empty strings adjacent to unquoted parameter expansions are elided during word splitting. Meanwhile, zsh does not perform word splitting except when in Bourne compatibility mode. In the example below, the correct behavior is to have five arguments to the function, and exactly two spaces on either side of the middle `-', since word splitting collapses multiple spaces in `$f' but leaves empty arguments intact. $ bash -c 'n() { echo "$#$@"; }; f=" - "; n - ""$f"" -' 3- - - $ ksh -c 'n() { echo "$#$@"; }; f=" - "; n - ""$f"" -' 5- - - $ zsh -c 'n() { echo "$#$@"; }; f=" - "; n - ""$f"" -' 3- - - $ zsh -c 'emulate sh; > n() { echo "$#$@"; }; f=" - "; n - ""$f"" -' 5- - - You can work around this by doing manual word splitting, such as using `"$str" $list' rather than `"$str"$list'. There are also portability pitfalls with particular expansions: `$@' One of the most famous shell-portability issues is related to `"$@"'. When there are no positional arguments, Posix says that `"$@"' is supposed to be equivalent to nothing, but the original Unix version 7 Bourne shell treated it as equivalent to `""' instead, and this behavior survives in later implementations like Digital Unix 5.0. The traditional way to work around this portability problem is to use `${1+"$@"}'. Unfortunately this method does not work with Zsh (3.x and 4.x), which is used on Mac OS X. When emulating the Bourne shell, Zsh performs word splitting on `${1+"$@"}': zsh $ emulate sh zsh $ for i in "$@"; do echo $i; done Hello World ! zsh $ for i in ${1+"$@"}; do echo $i; done Hello World ! Zsh handles plain `"$@"' properly, but we can't use plain `"$@"' because of the portability problems mentioned above. One workaround relies on Zsh's "global aliases" to convert `${1+"$@"}' into `"$@"' by itself: test "${ZSH_VERSION+set}" = set && alias -g '${1+"$@"}'='"$@"' Zsh only recognizes this alias when a shell word matches it exactly; `"foo"${1+"$@"}' remains subject to word splitting. Since this case always yields at least one shell word, use plain `"$@"'. A more conservative workaround is to avoid `"$@"' if it is possible that there may be no positional arguments. For example, instead of: cat conftest.c "$@" you can use this instead: case $# in 0) cat conftest.c;; *) cat conftest.c "$@";; esac Autoconf macros often use the `set' command to update `$@', so if you are writing shell code intended for `configure' you should not assume that the value of `$@' persists for any length of time. `${10}' The 10th, 11th, ... positional parameters can be accessed only after a `shift'. The 7th Edition shell reported an error if given `${10}', and Solaris 10 `/bin/sh' still acts that way: $ set 1 2 3 4 5 6 7 8 9 10 $ echo ${10} bad substitution Conversely, not all shells obey the Posix rule that when braces are omitted, multiple digits beyond a `$' imply the single-digit positional parameter expansion concatenated with the remaining literal digits. To work around the issue, you must use braces. $ bash -c 'set a b c d e f g h i j; echo $10 ${1}0' a0 a0 $ dash -c 'set a b c d e f g h i j; echo $10 ${1}0' j a0 `${VAR:-VALUE}' Old BSD shells, including the Ultrix `sh', don't accept the colon for any shell substitution, and complain and die. Similarly for ${VAR:=VALUE}, ${VAR:?VALUE}, etc. However, all shells that support functions allow the use of colon in shell substitution, and since m4sh requires functions, you can portably use null variable substitution patterns in configure scripts. `${VAR+VALUE}' When using `${VAR-VALUE}' or `${VAR-VALUE}' for providing alternate substitutions, VALUE must either be a single shell word, quoted, or in the context of an unquoted here-document. Solaris `/bin/sh' complains otherwise. $ /bin/sh -c 'echo ${a-b c}' /bin/sh: bad substitution $ /bin/sh -c 'echo ${a-'\''b c'\''}' b c $ /bin/sh -c 'echo "${a-b c}"' b c $ /bin/sh -c 'cat < broken $ echo "`printf 'foo\r\n'`"" bar" | cmp - broken - broken differ: char 4, line 1 Upon interrupt or SIGTERM, some shells may abort a command substitution, replace it with a null string, and wrongly evaluate the enclosing command before entering the trap or ending the script. This can lead to spurious errors: $ sh -c 'if test `sleep 5; echo hi` = hi; then echo yes; fi' $ ^C sh: test: hi: unexpected operator/operand You can avoid this by assigning the command substitution to a temporary variable: $ sh -c 'res=`sleep 5; echo hi` if test "x$res" = xhi; then echo yes; fi' $ ^C `$(COMMANDS)' This construct is meant to replace ``COMMANDS`', and it has most of the problems listed under ``COMMANDS`'. This construct can be nested while this is impossible to do portably with back quotes. Unfortunately it is not yet universally supported. Most notably, even recent releases of Solaris don't support it: $ showrev -c /bin/sh | grep version Command version: SunOS 5.10 Generic 121005-03 Oct 2006 $ echo $(echo blah) syntax error: `(' unexpected nor does IRIX 6.5's Bourne shell: $ uname -a IRIX firebird-image 6.5 07151432 IP22 $ echo $(echo blah) $(echo blah) If you do use `$(COMMANDS)', make sure that the commands do not start with a parenthesis, as that would cause confusion with a different notation `$((EXPRESSION))' that in modern shells is an arithmetic expression not a command. To avoid the confusion, insert a space between the two opening parentheses. Avoid COMMANDS that contain unbalanced parentheses in here-documents, comments, or case statement patterns, as many shells mishandle them. For example, Bash 3.1, `ksh88', `pdksh' 5.2.14, and Zsh 4.2.6 all mishandle the following valid command: echo $(case x in x) echo hello;; esac) `$((EXPRESSION))' Arithmetic expansion is not portable as some shells (most notably Solaris 10 `/bin/sh') don't support it. Among shells that do support `$(( ))', not all of them obey the Posix rule that octal and hexadecimal constants must be recognized: $ bash -c 'echo $(( 010 + 0x10 ))' 24 $ zsh -c 'echo $(( 010 + 0x10 ))' 26 $ zsh -c 'emulate sh; echo $(( 010 + 0x10 ))' 24 $ pdksh -c 'echo $(( 010 + 0x10 ))' pdksh: 010 + 0x10 : bad number `0x10' $ pdksh -c 'echo $(( 010 ))' 10 When it is available, using arithmetic expansion provides a noticeable speedup in script execution; but testing for support requires `eval' to avoid syntax errors. The following construct is used by `AS_VAR_ARITH' to provide arithmetic computation when all arguments are provided in decimal and without a leading zero, and all operators are properly quoted and appear as distinct arguments: if ( eval 'test $(( 1 + 1 )) = 2' ) 2>/dev/null; then eval 'func_arith () { func_arith_result=$(( $* )) }' else func_arith () { func_arith_result=`expr "$@"` } fi func_arith 1 + 1 foo=$func_arith_result `^' Always quote `^', otherwise traditional shells such as `/bin/sh' on Solaris 10 treat this like `|'.  File: autoconf.info, Node: Assignments, Next: Parentheses, Prev: Shell Substitutions, Up: Portable Shell 11.9 Assignments ================ When setting several variables in a row, be aware that the order of the evaluation is undefined. For instance `foo=1 foo=2; echo $foo' gives `1' with Solaris `/bin/sh', but `2' with Bash. You must use `;' to enforce the order: `foo=1; foo=2; echo $foo'. Don't rely on the following to find `subdir/program': PATH=subdir$PATH_SEPARATOR$PATH program as this does not work with Zsh 3.0.6. Use something like this instead: (PATH=subdir$PATH_SEPARATOR$PATH; export PATH; exec program) Don't rely on the exit status of an assignment: Ash 0.2 does not change the status and propagates that of the last statement: $ false || foo=bar; echo $? 1 $ false || foo=`:`; echo $? 0 and to make things even worse, QNX 4.25 just sets the exit status to 0 in any case: $ foo=`exit 1`; echo $? 0 To assign default values, follow this algorithm: 1. If the default value is a literal and does not contain any closing brace, use: : "${var='my literal'}" 2. If the default value contains no closing brace, has to be expanded, and the variable being initialized is not intended to be IFS-split (i.e., it's not a list), then use: : ${var="$default"} 3. If the default value contains no closing brace, has to be expanded, and the variable being initialized is intended to be IFS-split (i.e., it's a list), then use: var=${var="$default"} 4. If the default value contains a closing brace, then use: test "${var+set}" = set || var="has a '}'" In most cases `var=${var="$default"}' is fine, but in case of doubt, just use the last form. *Note Shell Substitutions::, items `${VAR:-VALUE}' and `${VAR=VALUE}' for the rationale.  File: autoconf.info, Node: Parentheses, Next: Slashes, Prev: Assignments, Up: Portable Shell 11.10 Parentheses in Shell Scripts ================================== Beware of two opening parentheses in a row, as many shell implementations treat them specially, and Posix says that a portable script cannot use `((' outside the `$((' form used for shell arithmetic. In traditional shells, `((cat))' behaves like `(cat)'; but many shells, including Bash and the Korn shell, treat `((cat))' as an arithmetic expression equivalent to `let "cat"', and may or may not report an error when they detect that `cat' is not a number. As another example, `pdksh' 5.2.14 does not treat the following code as a traditional shell would: if ((true) || false); then echo ok fi To work around this problem, insert a space between the two opening parentheses. There is a similar problem and workaround with `$(('; see *note Shell Substitutions::.  File: autoconf.info, Node: Slashes, Next: Special Shell Variables, Prev: Parentheses, Up: Portable Shell 11.11 Slashes in Shell Scripts ============================== Unpatched Tru64 5.1 `sh' omits the last slash of command-line arguments that contain two trailing slashes: $ echo / // /// //// .// //. / / // /// ./ //. $ x=// $ eval "echo \$x" / $ set -x $ echo abc | tr -t ab // + echo abc + tr -t ab / /bc Unpatched Tru64 4.0 `sh' adds a slash after `"$var"' if the variable is empty and the second double-quote is followed by a word that begins and ends with slash: $ sh -xc 'p=; echo "$p"/ouch/' p= + echo //ouch/ //ouch/ However, our understanding is that patches are available, so perhaps it's not worth worrying about working around these horrendous bugs.  File: autoconf.info, Node: Special Shell Variables, Next: Shell Functions, Prev: Slashes, Up: Portable Shell 11.12 Special Shell Variables ============================= Some shell variables should not be used, since they can have a deep influence on the behavior of the shell. In order to recover a sane behavior from the shell, some variables should be unset; M4sh takes care of this and provides fallback values, whenever needed, to cater for a very old `/bin/sh' that does not support `unset'. (*note Portable Shell Programming: Portable Shell.). As a general rule, shell variable names containing a lower-case letter are safe; you can define and use these variables without worrying about their effect on the underlying system, and without worrying about whether the shell changes them unexpectedly. (The exception is the shell variable `status', as described below.) Here is a list of names that are known to cause trouble. This list is not exhaustive, but you should be safe if you avoid the name `status' and names containing only upper-case letters and underscores. `?' Not all shells correctly reset `$?' after conditionals (*note Limitations of Shell Builtins: if.). Not all shells manage `$?' correctly in shell functions (*note Shell Functions::) or in traps (*note Limitations of Shell Builtins: trap.). Not all shells reset `$?' to zero after an empty command. $ bash -c 'false; $empty; echo $?' 0 $ zsh -c 'false; $empty; echo $?' 1 `_' Many shells reserve `$_' for various purposes, e.g., the name of the last command executed. `BIN_SH' In Tru64, if `BIN_SH' is set to `xpg4', subsidiary invocations of the standard shell conform to Posix. `CDPATH' When this variable is set it specifies a list of directories to search when invoking `cd' with a relative file name that did not start with `./' or `../'. Posix 1003.1-2001 says that if a nonempty directory name from `CDPATH' is used successfully, `cd' prints the resulting absolute file name. Unfortunately this output can break idioms like `abs=`cd src && pwd`' because `abs' receives the name twice. Also, many shells do not conform to this part of Posix; for example, `zsh' prints the result only if a directory name other than `.' was chosen from `CDPATH'. In practice the shells that have this problem also support `unset', so you can work around the problem as follows: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH You can also avoid output by ensuring that your directory name is absolute or anchored at `./', as in `abs=`cd ./src && pwd`'. Configure scripts use M4sh, which automatically unsets `CDPATH' if possible, so you need not worry about this problem in those scripts. `CLICOLOR_FORCE' When this variable is set, some implementations of tools like `ls' attempt to add color to their output via terminal escape sequences, even when the output is not directed to a terminal, and can thus cause spurious failures in scripts. Configure scripts use M4sh, which automatically unsets this variable. `DUALCASE' In the MKS shell, case statements and file name generation are case-insensitive unless `DUALCASE' is nonzero. Autoconf-generated scripts export this variable when they start up. `ENV' `MAIL' `MAILPATH' `PS1' `PS2' `PS4' These variables should not matter for shell scripts, since they are supposed to affect only interactive shells. However, at least one shell (the pre-3.0 UWIN Korn shell) gets confused about whether it is interactive, which means that (for example) a `PS1' with a side effect can unexpectedly modify `$?'. To work around this bug, M4sh scripts (including `configure' scripts) do something like this: (unset ENV) >/dev/null 2>&1 && unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' (actually, there is some complication due to bugs in `unset'; *note Limitations of Shell Builtins: unset.). `FPATH' The Korn shell uses `FPATH' to find shell functions, so avoid `FPATH' in portable scripts. `FPATH' is consulted after `PATH', but you still need to be wary of tests that use `PATH' to find whether a command exists, since they might report the wrong result if `FPATH' is also set. `GREP_OPTIONS' When this variable is set, some implementations of `grep' honor these options, even if the options include direction to enable colored output via terminal escape sequences, and the result can cause spurious failures when the output is not directed to a terminal. Configure scripts use M4sh, which automatically unsets this variable. `IFS' Long ago, shell scripts inherited `IFS' from the environment, but this caused many problems so modern shells ignore any environment settings for `IFS'. Don't set the first character of `IFS' to backslash. Indeed, Bourne shells use the first character (backslash) when joining the components in `"$@"' and some shells then reinterpret (!) the backslash escapes, so you can end up with backspace and other strange characters. The proper value for `IFS' (in regular code, not when performing splits) is `'. The first character is especially important, as it is used to join the arguments in `$*'; however, note that traditional shells, but also bash-2.04, fail to adhere to this and join with a space anyway. M4sh guarantees that `IFS' will have the default value at the beginning of a script, and many macros within autoconf rely on this setting. It is okay to use blocks of shell code that temporarily change the value of `IFS' in order to split on another character, but remember to restore it before expanding further macros. Unsetting `IFS' instead of resetting it to the default sequence is not suggested, since code that tries to save and restore the variable's value will incorrectly reset it to an empty value, thus disabling field splitting: unset IFS # default separators used for field splitting save_IFS=$IFS IFS=: # ... IFS=$save_IFS # no field splitting performed `LANG' `LC_ALL' `LC_COLLATE' `LC_CTYPE' `LC_MESSAGES' `LC_MONETARY' `LC_NUMERIC' `LC_TIME' You should set all these variables to `C' because so much configuration code assumes the C locale and Posix requires that locale environment variables be set to `C' if the C locale is desired; `configure' scripts and M4sh do that for you. Export these variables after setting them. `LANGUAGE' `LANGUAGE' is not specified by Posix, but it is a GNU extension that overrides `LC_ALL' in some cases, so you (or M4sh) should set it too. `LC_ADDRESS' `LC_IDENTIFICATION' `LC_MEASUREMENT' `LC_NAME' `LC_PAPER' `LC_TELEPHONE' These locale environment variables are GNU extensions. They are treated like their Posix brethren (`LC_COLLATE', etc.) as described above. `LINENO' Most modern shells provide the current line number in `LINENO'. Its value is the line number of the beginning of the current command. M4sh, and hence Autoconf, attempts to execute `configure' with a shell that supports `LINENO'. If no such shell is available, it attempts to implement `LINENO' with a Sed prepass that replaces each instance of the string `$LINENO' (not followed by an alphanumeric character) with the line's number. In M4sh scripts you should execute `AS_LINENO_PREPARE' so that these workarounds are included in your script; configure scripts do this automatically in `AC_INIT'. You should not rely on `LINENO' within `eval' or shell functions, as the behavior differs in practice. The presence of a quoted newline within simple commands can alter which line number is used as the starting point for `$LINENO' substitutions within that command. Also, the possibility of the Sed prepass means that you should not rely on `$LINENO' when quoted, when in here-documents, or when line continuations are used. Subshells should be OK, though. In the following example, lines 1, 9, and 14 are portable, but the other instances of `$LINENO' do not have deterministic values: $ cat lineno echo 1. $LINENO echo "2. $LINENO 3. $LINENO" cat < N > s,$,-, > t loop > :loop > s,^\([0-9]*\)\(.*\)[$]LINENO\([^a-zA-Z0-9_]\),\1\2\1\3, > t loop > s,-$,, > s,^[0-9]*\n,, > ' | > sh 1. 1 2. 2 3. 3 5. 5 6. 6 7. \7 9. 9 10. 10 11. 11 12. 12 13. 13 14. 14 15. 15 18. 16 18. 17 19. 20 In particular, note that `config.status' (and any other subsidiary script created by `AS_INIT_GENERATED') might report line numbers relative to the parent script as a result of the potential Sed pass. `NULLCMD' When executing the command `>foo', `zsh' executes `$NULLCMD >foo' unless it is operating in Bourne shell compatibility mode and the `zsh' version is newer than 3.1.6-dev-18. If you are using an older `zsh' and forget to set `NULLCMD', your script might be suspended waiting for data on its standard input. `options' For `zsh' 4.3.10, `options' is treated as an associative array even after `emulate sh', so it should not be used. `PATH_SEPARATOR' On DJGPP systems, the `PATH_SEPARATOR' environment variable can be set to either `:' or `;' to control the path separator Bash uses to set up certain environment variables (such as `PATH'). You can set this variable to `;' if you want `configure' to use `;' as a separator; this might be useful if you plan to use non-Posix shells to execute files. *Note File System Conventions::, for more information about `PATH_SEPARATOR'. `POSIXLY_CORRECT' In the GNU environment, exporting `POSIXLY_CORRECT' with any value (even empty) causes programs to try harder to conform to Posix. Autoconf does not directly manipulate this variable, but `bash' ties the shell variable `POSIXLY_CORRECT' to whether the script is running in Posix mode. Therefore, take care when exporting or unsetting this variable, so as not to change whether `bash' is in Posix mode. $ bash --posix -c 'set -o | grep posix > unset POSIXLY_CORRECT > set -o | grep posix' posix on posix off `PWD' Posix 1003.1-2001 requires that `cd' and `pwd' must update the `PWD' environment variable to point to the logical name of the current directory, but traditional shells do not support this. This can cause confusion if one shell instance maintains `PWD' but a subsidiary and different shell does not know about `PWD' and executes `cd'; in this case `PWD' points to the wrong directory. Use ``pwd`' rather than `$PWD'. `RANDOM' Many shells provide `RANDOM', a variable that returns a different integer each time it is used. Most of the time, its value does not change when it is not used, but on IRIX 6.5 the value changes all the time. This can be observed by using `set'. It is common practice to use `$RANDOM' as part of a file name, but code shouldn't rely on `$RANDOM' expanding to a nonempty string. `status' This variable is an alias to `$?' for `zsh' (at least 3.1.6), hence read-only. Do not use it.  File: autoconf.info, Node: Shell Functions, Next: Limitations of Builtins, Prev: Special Shell Variables, Up: Portable Shell 11.13 Shell Functions ===================== Nowadays, it is difficult to find a shell that does not support shell functions at all. However, some differences should be expected. When declaring a shell function, you must include whitespace between the `)' after the function name and the start of the compound expression, to avoid upsetting `ksh'. While it is possible to use any compound command, most scripts use `{...}'. $ /bin/sh -c 'a(){ echo hi;}; a' hi $ ksh -c 'a(){ echo hi;}; a' ksh: syntax error at line 1: `}' unexpected $ ksh -c 'a() { echo hi;}; a' hi Inside a shell function, you should not rely on the error status of a subshell if the last command of that subshell was `exit' or `trap', as this triggers bugs in zsh 4.x; while Autoconf tries to find a shell that does not exhibit the bug, zsh might be the only shell present on the user's machine. Likewise, the state of `$?' is not reliable when entering a shell function. This has the effect that using a function as the first command in a `trap' handler can cause problems. $ bash -c 'foo() { echo $?; }; trap foo 0; (exit 2); exit 2'; echo $? 2 2 $ ash -c 'foo() { echo $?; }; trap foo 0; (exit 2); exit 2'; echo $? 0 2 DJGPP bash 2.04 has a bug in that `return' from a shell function which also used a command substitution causes a segmentation fault. To work around the issue, you can use `return' from a subshell, or `AS_SET_STATUS' as last command in the execution flow of the function (*note Common Shell Constructs::). Not all shells treat shell functions as simple commands impacted by `set -e', for example with Solaris 10 `/bin/sh': $ bash -c 'f() { return 1; }; set -e; f; echo oops' $ /bin/sh -c 'f() { return 1; }; set -e; f; echo oops' oops Shell variables and functions may share the same namespace, for example with Solaris 10 `/bin/sh': $ f () { :; }; f=; f f: not found For this reason, Autoconf (actually M4sh, *note Programming in M4sh::) uses the prefix `as_fn_' for its functions. Handling of positional parameters and shell options varies among shells. For example, Korn shells reset and restore trace output (`set -x') and other options upon function entry and exit. Inside a function, IRIX sh sets `$0' to the function name. It is not portable to pass temporary environment variables to shell functions. Solaris `/bin/sh' does not see the variable. Meanwhile, not all shells follow the Posix rule that the assignment must affect the current environment in the same manner as special built-ins. $ /bin/sh -c 'func() { echo $a;}; a=1 func; echo $a' => => $ ash -c 'func() { echo $a;}; a=1 func; echo $a' =>1 => $ bash -c 'set -o posix; func() { echo $a;}; a=1 func; echo $a' =>1 =>1 Some ancient Bourne shell variants with function support did not reset `$I, I >= 0', upon function exit, so effectively the arguments of the script were lost after the first function invocation. It is probably not worth worrying about these shells any more. With AIX sh, a `trap' on 0 installed in a shell function triggers at function exit rather than at script exit. *Note Limitations of Shell Builtins: trap.  File: autoconf.info, Node: Limitations of Builtins, Next: Limitations of Usual Tools, Prev: Shell Functions, Up: Portable Shell 11.14 Limitations of Shell Builtins =================================== No, no, we are serious: some shells do have limitations! :) You should always keep in mind that any builtin or command may support options, and therefore differ in behavior with arguments starting with a dash. For instance, even the innocent `echo "$word"' can give unexpected results when `word' starts with a dash. It is often possible to avoid this problem using `echo "x$word"', taking the `x' into account later in the pipe. Many of these limitations can be worked around using M4sh (*note Programming in M4sh::). `.' Use `.' only with regular files (use `test -f'). Bash 2.03, for instance, chokes on `. /dev/null'. Remember that `.' uses `PATH' if its argument contains no slashes. Also, some shells, including bash 3.2, implicitly append the current directory to this `PATH' search, even though Posix forbids it. So if you want to use `.' on a file `foo' in the current directory, you must use `. ./foo'. Not all shells gracefully handle syntax errors within a sourced file. On one extreme, some non-interactive shells abort the entire script. On the other, `zsh' 4.3.10 has a bug where it fails to react to the syntax error. $ echo 'fi' > syntax $ bash -c '. ./syntax; echo $?' ./syntax: line 1: syntax error near unexpected token `fi' ./syntax: line 1: `fi' 1 $ ash -c '. ./syntax; echo $?' ./syntax: 1: Syntax error: "fi" unexpected $ zsh -c '. ./syntax; echo $?' ./syntax:1: parse error near `fi' 0 `!' The Unix version 7 shell did not support negating the exit status of commands with `!', and this feature is still absent from some shells (e.g., Solaris `/bin/sh'). Other shells, such as FreeBSD `/bin/sh' or `ash', have bugs when using `!': $ sh -c '! : | :'; echo $? 1 $ ash -c '! : | :'; echo $? 0 $ sh -c '! { :; }'; echo $? 1 $ ash -c '! { :; }'; echo $? {: not found Syntax error: "}" unexpected 2 Shell code like this: if ! cmp file1 file2 >/dev/null 2>&1; then echo files differ or trouble fi is therefore not portable in practice. Typically it is easy to rewrite such code, e.g.: cmp file1 file2 >/dev/null 2>&1 || echo files differ or trouble More generally, one can always rewrite `! COMMAND' as: if COMMAND; then (exit 1); else :; fi `{...}' Bash 3.2 (and earlier versions) sometimes does not properly set `$?' when failing to write redirected output of a compound command. This problem is most commonly observed with `{...}'; it does not occur with `(...)'. For example: $ bash -c '{ echo foo; } >/bad; echo $?' bash: line 1: /bad: Permission denied 0 $ bash -c 'while :; do echo; done >/bad; echo $?' bash: line 1: /bad: Permission denied 0 To work around the bug, prepend `:;': $ bash -c ':;{ echo foo; } >/bad; echo $?' bash: line 1: /bad: Permission denied 1 Posix requires a syntax error if a brace list has no contents. However, not all shells obey this rule; and on shells where empty lists are permitted, the effect on `$?' is inconsistent. To avoid problems, ensure that a brace list is never empty. $ bash -c 'false; { }; echo $?' || echo $? bash: line 1: syntax error near unexpected token `}' bash: line 1: `false; { }; echo $?' 2 $ zsh -c 'false; { }; echo $?' || echo $? 1 $ pdksh -c 'false; { }; echo $?' || echo $? 0 `break' The use of `break 2' etc. is safe. `case' You don't need to quote the argument; no splitting is performed. You don't need the final `;;', but you should use it. Posix requires support for `case' patterns with opening parentheses like this: case $file_name in (*.c) echo "C source code";; esac but the `(' in this example is not portable to many Bourne shell implementations, which is a pity for those of us using tools that rely on balanced parentheses. For instance, with Solaris `/bin/sh': $ case foo in (foo) echo foo;; esac error-->syntax error: `(' unexpected The leading `(' can be omitted safely. Unfortunately, there are contexts where unbalanced parentheses cause other problems, such as when using a syntax-highlighting editor that searches for the balancing counterpart, or more importantly, when using a case statement as an underquoted argument to an Autoconf macro. *Note Balancing Parentheses::, for tradeoffs involved in various styles of dealing with unbalanced `)'. Zsh handles pattern fragments derived from parameter expansions or command substitutions as though quoted: $ pat=\?; case aa in ?$pat) echo match;; esac $ pat=\?; case a? in ?$pat) echo match;; esac match Because of a bug in its `fnmatch', Bash fails to properly handle backslashes in character classes: bash-2.02$ case /tmp in [/\\]*) echo OK;; esac bash-2.02$ This is extremely unfortunate, since you are likely to use this code to handle Posix or MS-DOS absolute file names. To work around this bug, always put the backslash first: bash-2.02$ case '\TMP' in [\\/]*) echo OK;; esac OK bash-2.02$ case /tmp in [\\/]*) echo OK;; esac OK Many Bourne shells cannot handle closing brackets in character classes correctly. Some shells also have problems with backslash escaping in case you do not want to match the backslash: both a backslash and the escaped character match this pattern. To work around this, specify the character class in a variable, so that quote removal does not apply afterwards, and the special characters don't have to be backslash-escaped: $ case '\' in [\<]) echo OK;; esac OK $ scanset='[<]'; case '\' in $scanset) echo OK;; esac $ Even with this, Solaris `ksh' matches a backslash if the set contains any of the characters `|', `&', `(', or `)'. Conversely, Tru64 `ksh' (circa 2003) erroneously always matches a closing parenthesis if not specified in a character class: $ case foo in *\)*) echo fail ;; esac fail $ case foo in *')'*) echo fail ;; esac fail Some shells, such as Ash 0.3.8, are confused by an empty `case'/`esac': ash-0.3.8 $ case foo in esac; error-->Syntax error: ";" unexpected (expecting ")") Posix requires `case' to give an exit status of 0 if no cases match. However, `/bin/sh' in Solaris 10 does not obey this rule. Meanwhile, it is unclear whether a case that matches, but contains no statements, must also change the exit status to 0. The M4sh macro `AS_CASE' works around these inconsistencies. $ bash -c 'case `false` in ?) ;; esac; echo $?' 0 $ /bin/sh -c 'case `false` in ?) ;; esac; echo $?' 255 `cd' Posix 1003.1-2001 requires that `cd' must support the `-L' ("logical") and `-P' ("physical") options, with `-L' being the default. However, traditional shells do not support these options, and their `cd' command has the `-P' behavior. Portable scripts should assume neither option is supported, and should assume neither behavior is the default. This can be a bit tricky, since the Posix default behavior means that, for example, `ls ..' and `cd ..' may refer to different directories if the current logical directory is a symbolic link. It is safe to use `cd DIR' if DIR contains no `..' components. Also, Autoconf-generated scripts check for this problem when computing variables like `ac_top_srcdir' (*note Configuration Actions::), so it is safe to `cd' to these variables. Posix states that behavior is undefined if `cd' is given an explicit empty argument. Some shells do nothing, some change to the first entry in `CDPATH', some change to `HOME', and some exit the shell rather than returning an error. Unfortunately, this means that if `$var' is empty, then `cd "$var"' is less predictable than `cd $var' (at least the latter is well-behaved in all shells at changing to `HOME', although this is probably not what you wanted in a script). You should check that a directory name was supplied before trying to change locations. *Note Special Shell Variables::, for portability problems involving `cd' and the `CDPATH' environment variable. Also please see the discussion of the `pwd' command. `echo' The simple `echo' is probably the most surprising source of portability troubles. It is not possible to use `echo' portably unless both options and escape sequences are omitted. Don't expect any option. Do not use backslashes in the arguments, as there is no consensus on their handling. For `echo '\n' | wc -l', the `sh' of Solaris outputs 2, but Bash and Zsh (in `sh' emulation mode) output 1. The problem is truly `echo': all the shells understand `'\n'' as the string composed of a backslash and an `n'. Within a command substitution, `echo 'string\c'' will mess up the internal state of ksh88 on AIX 6.1 so that it will print the first character `s' only, followed by a newline, and then entirely drop the output of the next echo in a command substitution. Because of these problems, do not pass a string containing arbitrary characters to `echo'. For example, `echo "$foo"' is safe only if you know that FOO's value cannot contain backslashes and cannot start with `-'. If this may not be true, `printf' is in general safer and easier to use than `echo' and `echo -n'. Thus, scripts where portability is not a major concern should use `printf '%s\n'' whenever `echo' could fail, and similarly use `printf %s' instead of `echo -n'. For portable shell scripts, instead, it is suggested to use a here-document like this: cat </dev/null && ACTION `expr "XFOO" : "XBAR"' is more robust than `echo "XFOO" | grep "^XBAR"', because it avoids problems when `FOO' contains backslashes. `trap' It is safe to trap at least the signals 1, 2, 13, and 15. You can also trap 0, i.e., have the `trap' run when the script ends (either via an explicit `exit', or the end of the script). The trap for 0 should be installed outside of a shell function, or AIX 5.3 `/bin/sh' will invoke the trap at the end of this function. Posix says that `trap - 1 2 13 15' resets the traps for the specified signals to their default values, but many common shells (e.g., Solaris `/bin/sh') misinterpret this and attempt to execute a "command" named `-' when the specified conditions arise. Posix 2008 also added a requirement to support `trap 1 2 13 15' to reset traps, as this is supported by a larger set of shells, but there are still shells like `dash' that mistakenly try to execute `1' instead of resetting the traps. Therefore, there is no portable workaround, except for `trap - 0', for which `trap '' 0' is a portable substitute. Although Posix is not absolutely clear on this point, it is widely admitted that when entering the trap `$?' should be set to the exit status of the last command run before the trap. The ambiguity can be summarized as: "when the trap is launched by an `exit', what is the _last_ command run: that before `exit', or `exit' itself?" Bash considers `exit' to be the last command, while Zsh and Solaris `/bin/sh' consider that when the trap is run it is _still_ in the `exit', hence it is the previous exit status that the trap receives: $ cat trap.sh trap 'echo $?' 0 (exit 42); exit 0 $ zsh trap.sh 42 $ bash trap.sh 0 The portable solution is then simple: when you want to `exit 42', run `(exit 42); exit 42', the first `exit' being used to set the exit status to 42 for Zsh, and the second to trigger the trap and pass 42 as exit status for Bash. In M4sh, this is covered by using `AS_EXIT'. The shell in FreeBSD 4.0 has the following bug: `$?' is reset to 0 by empty lines if the code is inside `trap'. $ trap 'false echo $?' 0 $ exit 0 Fortunately, this bug only affects `trap'. Several shells fail to execute an exit trap that is defined inside a subshell, when the last command of that subshell is not a builtin. A workaround is to use `exit $?' as the shell builtin. $ bash -c '(trap "echo hi" 0; /bin/true)' hi $ /bin/sh -c '(trap "echo hi" 0; /bin/true)' $ /bin/sh -c '(trap "echo hi" 0; /bin/true; exit $?)' hi Likewise, older implementations of `bash' failed to preserve `$?' across an exit trap consisting of a single cleanup command. $ bash -c 'trap "/bin/true" 0; exit 2'; echo $? 2 $ bash-2.05b -c 'trap "/bin/true" 0; exit 2'; echo $? 0 $ bash-2.05b -c 'trap ":; /bin/true" 0; exit 2'; echo $? 2 `true' Don't worry: as far as we know `true' is portable. Nevertheless, it's not always a builtin (e.g., Bash 1.x), and the portable shell community tends to prefer using `:'. This has a funny side effect: when asked whether `false' is more portable than `true' Alexandre Oliva answered: In a sense, yes, because if it doesn't exist, the shell will produce an exit status of failure, which is correct for `false', but not for `true'. Remember that even though `:' ignores its arguments, it still takes time to compute those arguments. It is a good idea to use double quotes around any arguments to `:' to avoid time spent in field splitting and file name expansion. `unset' In some nonconforming shells (e.g., Solaris 10 `/bin/ksh' and `/usr/xpg4/bin/sh', NetBSD 5.99.43 sh, or Bash 2.05a), `unset FOO' fails when `FOO' is not set. This can interfere with `set -e' operation. You can use FOO=; unset FOO if you are not sure that `FOO' is set. A few ancient shells lack `unset' entirely. For some variables such as `PS1', you can use a neutralizing value instead: PS1='$ ' Usually, shells that do not support `unset' need less effort to make the environment sane, so for example is not a problem if you cannot unset `CDPATH' on those shells. However, Bash 2.01 mishandles `unset MAIL' and `unset MAILPATH' in some cases and dumps core. So, you should do something like ( (unset MAIL) || exit 1) >/dev/null 2>&1 && unset MAIL || : *Note Special Shell Variables::, for some neutralizing values. Also, see *note Limitations of Builtins: export, for the case of environment variables. `wait' The exit status of `wait' is not always reliable.  File: autoconf.info, Node: Limitations of Usual Tools, Prev: Limitations of Builtins, Up: Portable Shell 11.15 Limitations of Usual Tools ================================ The small set of tools you can expect to find on any machine can still include some limitations you should be aware of. `awk' Don't leave white space before the opening parenthesis in a user function call. Posix does not allow this and GNU Awk rejects it: $ gawk 'function die () { print "Aaaaarg!" } BEGIN { die () }' gawk: cmd. line:2: BEGIN { die () } gawk: cmd. line:2: ^ parse error $ gawk 'function die () { print "Aaaaarg!" } BEGIN { die() }' Aaaaarg! Posix says that if a program contains only `BEGIN' actions, and contains no instances of `getline', then the program merely executes the actions without reading input. However, traditional Awk implementations (such as Solaris 10 `awk') read and discard input in this case. Portable scripts can redirect input from `/dev/null' to work around the problem. For example: awk 'BEGIN {print "hello world"}' printf "foo\n|foo\n" | $EGREP '^(|foo|bar)$' |foo > printf "bar\nbar|\n" | $EGREP '^(foo|bar|)$' bar| > printf "foo\nfoo|\n|bar\nbar\n" | $EGREP '^(foo||bar)$' foo |bar `$EGREP' also suffers the limitations of `grep' (*note Limitations of Usual Tools: grep.). `expr' Not all implementations obey the Posix rule that `--' separates options from arguments; likewise, not all implementations provide the extension to Posix that the first argument can be treated as part of a valid expression rather than an invalid option if it begins with `-'. When performing arithmetic, use `expr 0 + $var' if `$var' might be a negative number, to keep `expr' from interpreting it as an option. No `expr' keyword starts with `X', so use `expr X"WORD" : 'XREGEX'' to keep `expr' from misinterpreting WORD. Don't use `length', `substr', `match' and `index'. `expr' (`|') You can use `|'. Although Posix does require that `expr ''' return the empty string, it does not specify the result when you `|' together the empty string (or zero) with the empty string. For example: expr '' \| '' Posix 1003.2-1992 returns the empty string for this case, but traditional Unix returns `0' (Solaris is one such example). In Posix 1003.1-2001, the specification was changed to match traditional Unix's behavior (which is bizarre, but it's too late to fix this). Please note that the same problem does arise when the empty string results from a computation, as in: expr bar : foo \| foo : bar Avoid this portability problem by avoiding the empty string. `expr' (`:') Portable `expr' regular expressions should use `\' to escape only characters in the string `$()*.0123456789[\^n{}'. For example, alternation, `\|', is common but Posix does not require its support, so it should be avoided in portable scripts. Similarly, `\+' and `\?' should be avoided. Portable `expr' regular expressions should not begin with `^'. Patterns are automatically anchored so leading `^' is not needed anyway. On the other hand, the behavior of the `$' anchor is not portable on multi-line strings. Posix is ambiguous whether the anchor applies to each line, as was done in older versions of the GNU Core Utilities, or whether it applies only to the end of the overall string, as in Coreutils 6.0 and most other implementations. $ baz='foo > bar' $ expr "X$baz" : 'X\(foo\)$' $ expr-5.97 "X$baz" : 'X\(foo\)$' foo The Posix standard is ambiguous as to whether `expr 'a' : '\(b\)'' outputs `0' or the empty string. In practice, it outputs the empty string on most platforms, but portable scripts should not assume this. For instance, the QNX 4.25 native `expr' returns `0'. One might think that a way to get a uniform behavior would be to use the empty string as a default value: expr a : '\(b\)' \| '' Unfortunately this behaves exactly as the original expression; see the `expr' (`|') entry for more information. Some ancient `expr' implementations (e.g., SunOS 4 `expr' and Solaris 8 `/usr/ucb/expr') have a silly length limit that causes `expr' to fail if the matched substring is longer than 120 bytes. In this case, you might want to fall back on `echo|sed' if `expr' fails. Nowadays this is of practical importance only for the rare installer who mistakenly puts `/usr/ucb' before `/usr/bin' in `PATH'. On Mac OS X 10.4, `expr' mishandles the pattern `[^-]' in some cases. For example, the command expr Xpowerpc-apple-darwin8.1.0 : 'X[^-]*-[^-]*-\(.*\)' outputs `apple-darwin8.1.0' rather than the correct `darwin8.1.0'. This particular case can be worked around by substituting `[^--]' for `[^-]'. Don't leave, there is some more! The QNX 4.25 `expr', in addition of preferring `0' to the empty string, has a funny behavior in its exit status: it's always 1 when parentheses are used! $ val=`expr 'a' : 'a'`; echo "$?: $val" 0: 1 $ val=`expr 'a' : 'b'`; echo "$?: $val" 1: 0 $ val=`expr 'a' : '\(a\)'`; echo "?: $val" 1: a $ val=`expr 'a' : '\(b\)'`; echo "?: $val" 1: 0 In practice this can be a big problem if you are ready to catch failures of `expr' programs with some other method (such as using `sed'), since you may get twice the result. For instance $ expr 'a' : '\(a\)' || echo 'a' | sed 's/^\(a\)$/\1/' outputs `a' on most hosts, but `aa' on QNX 4.25. A simple workaround consists of testing `expr' and using a variable set to `expr' or to `false' according to the result. Tru64 `expr' incorrectly treats the result as a number, if it can be interpreted that way: $ expr 00001 : '.*\(...\)' 1 On HP-UX 11, `expr' only supports a single sub-expression. $ expr 'Xfoo' : 'X\(f\(oo\)*\)$' expr: More than one '\(' was used. `fgrep' Posix 1003.1-2001 no longer requires `fgrep', but many hosts do not yet support the Posix replacement `grep -F'. Also, some traditional implementations do not work on long input lines. To work around these problems, invoke `AC_PROG_FGREP' and then use `$FGREP'. Tru64/OSF 5.1 `fgrep' does not match an empty pattern. `find' The option `-maxdepth' seems to be GNU specific. Tru64 v5.1, NetBSD 1.5 and Solaris `find' commands do not understand it. The replacement of `{}' is guaranteed only if the argument is exactly _{}_, not if it's only a part of an argument. For instance on DU, and HP-UX 10.20 and HP-UX 11: $ touch foo $ find . -name foo -exec echo "{}-{}" \; {}-{} while GNU `find' reports `./foo-./foo'. `grep' Portable scripts can rely on the `grep' options `-c', `-l', `-n', and `-v', but should avoid other options. For example, don't use `-w', as Posix does not require it and Irix 6.5.16m's `grep' does not support it. Also, portable scripts should not combine `-c' with `-l', as Posix does not allow this. Some of the options required by Posix are not portable in practice. Don't use `grep -q' to suppress output, because many `grep' implementations (e.g., Solaris) do not support `-q'. Don't use `grep -s' to suppress output either, because Posix says `-s' does not suppress output, only some error messages; also, the `-s' option of traditional `grep' behaved like `-q' does in most modern implementations. Instead, redirect the standard output and standard error (in case the file doesn't exist) of `grep' to `/dev/null'. Check the exit status of `grep' to determine whether it found a match. The QNX4 implementation fails to count lines with `grep -c '$'', but works with `grep -c '^''. Other alternatives for counting lines are to use `sed -n '$='' or `wc -l'. Some traditional `grep' implementations do not work on long input lines. On AIX the default `grep' silently truncates long lines on the input before matching. Also, many implementations do not support multiple regexps with `-e': they either reject `-e' entirely (e.g., Solaris) or honor only the last pattern (e.g., IRIX 6.5 and NeXT). To work around these problems, invoke `AC_PROG_GREP' and then use `$GREP'. Another possible workaround for the multiple `-e' problem is to separate the patterns by newlines, for example: grep 'foo bar' in.txt except that this fails with traditional `grep' implementations and with OpenBSD 3.8 `grep'. Traditional `grep' implementations (e.g., Solaris) do not support the `-E' or `-F' options. To work around these problems, invoke `AC_PROG_EGREP' and then use `$EGREP', and similarly for `AC_PROG_FGREP' and `$FGREP'. Even if you are willing to require support for Posix `grep', your script should not use both `-E' and `-F', since Posix does not allow this combination. Portable `grep' regular expressions should use `\' only to escape characters in the string `$()*.0123456789[\^{}'. For example, alternation, `\|', is common but Posix does not require its support in basic regular expressions, so it should be avoided in portable scripts. Solaris and HP-UX `grep' do not support it. Similarly, the following escape sequences should also be avoided: `\<', `\>', `\+', `\?', `\`', `\'', `\B', `\b', `\S', `\s', `\W', and `\w'. Posix does not specify the behavior of `grep' on binary files. An example where this matters is using BSD `grep' to search text that includes embedded ANSI escape sequences for colored output to terminals (`\033[m' is the sequence to restore normal output); the behavior depends on whether input is seekable: $ printf 'esc\033[mape\n' > sample $ grep . sample Binary file sample matches $ cat sample | grep . escape `join' Solaris 8 `join' has bugs when the second operand is standard input, and when standard input is a pipe. For example, the following shell script causes Solaris 8 `join' to loop forever: cat >file <<'EOF' 1 x 2 y EOF cat file | join file - Use `join - file' instead. On NetBSD, `join -a 1 file1 file2' mistakenly behaves like `join -a 1 -a 2 1 file1 file2', resulting in a usage warning; the workaround is to use `join -a1 file1 file2' instead. `ln' Don't rely on `ln' having a `-f' option. Symbolic links are not available on old systems; use `$(LN_S)' as a portable substitute. For versions of the DJGPP before 2.04, `ln' emulates symbolic links to executables by generating a stub that in turn calls the real program. This feature also works with nonexistent files like in the Posix spec. So `ln -s file link' generates `link.exe', which attempts to call `file.exe' if run. But this feature only works for executables, so `cp -p' is used instead for these systems. DJGPP versions 2.04 and later have full support for symbolic links. `ls' The portable options are `-acdilrtu'. Current practice is for `-l' to output both owner and group, even though ancient versions of `ls' omitted the group. On ancient hosts, `ls foo' sent the diagnostic `foo not found' to standard output if `foo' did not exist. Hence a shell command like `sources=`ls *.c 2>/dev/null`' did not always work, since it was equivalent to `sources='*.c not found'' in the absence of `.c' files. This is no longer a practical problem, since current `ls' implementations send diagnostics to standard error. The behavior of `ls' on a directory that is being concurrently modified is not always predictable, because of a data race where cached information returned by `readdir' does not match the current directory state. In fact, MacOS 10.5 has an intermittent bug where `readdir', and thus `ls', sometimes lists a file more than once if other files were added or removed from the directory immediately prior to the `ls' call. Since `ls' already sorts its output, the duplicate entries can be avoided by piping the results through `uniq'. `mkdir' No `mkdir' option is portable to older systems. Instead of `mkdir -p FILE-NAME', you should use `AS_MKDIR_P(FILE-NAME)' (*note Programming in M4sh::) or `AC_PROG_MKDIR_P' (*note Particular Programs::). Combining the `-m' and `-p' options, as in `mkdir -m go-w -p DIR', often leads to trouble. FreeBSD `mkdir' incorrectly attempts to change the permissions of DIR even if it already exists. HP-UX 11.23 and IRIX 6.5 `mkdir' often assign the wrong permissions to any newly-created parents of DIR. Posix does not clearly specify whether `mkdir -p foo' should succeed when `foo' is a symbolic link to an already-existing directory. The GNU Core Utilities 5.1.0 `mkdir' succeeds, but Solaris `mkdir' fails. Traditional `mkdir -p' implementations suffer from race conditions. For example, if you invoke `mkdir -p a/b' and `mkdir -p a/c' at the same time, both processes might detect that `a' is missing, one might create `a', then the other might try to create `a' and fail with a `File exists' diagnostic. The GNU Core Utilities (`fileutils' version 4.1), FreeBSD 5.0, NetBSD 2.0.2, and OpenBSD 2.4 are known to be race-free when two processes invoke `mkdir -p' simultaneously, but earlier versions are vulnerable. Solaris `mkdir' is still vulnerable as of Solaris 10, and other traditional Unix systems are probably vulnerable too. This possible race is harmful in parallel builds when several Make rules call `mkdir -p' to construct directories. You may use `install-sh -d' as a safe replacement, provided this script is recent enough; the copy shipped with Autoconf 2.60 and Automake 1.10 is OK, but copies from older versions are vulnerable. `mkfifo' `mknod' The GNU Coding Standards state that `mknod' is safe to use on platforms where it has been tested to exist; but it is generally portable only for creating named FIFOs, since device numbers are platform-specific. Autotest uses `mkfifo' to implement parallel testsuites. Posix states that behavior is unspecified when opening a named FIFO for both reading and writing; on at least Cygwin, this results in failure on any attempt to read or write to that file descriptor. `mktemp' Shell scripts can use temporary files safely with `mktemp', but it does not exist on all systems. A portable way to create a safe temporary file name is to create a temporary directory with mode 700 and use a file inside this directory. Both methods prevent attackers from gaining control, though `mktemp' is far less likely to fail gratuitously under attack. Here is sample code to create a new temporary directory `$dir' safely: # Create a temporary directory $dir in $TMPDIR (default /tmp). # Use mktemp if possible; otherwise fall back on mkdir, # with $RANDOM to make collisions less likely. : "${TMPDIR:=/tmp}" { dir=` (umask 077 && mktemp -d "$TMPDIR/fooXXXXXX") 2>/dev/null ` && test -d "$dir" } || { dir=$TMPDIR/foo$$-$RANDOM (umask 077 && mkdir "$dir") } || exit $? `mv' The only portable options are `-f' and `-i'. Moving individual files between file systems is portable (it was in Unix version 6), but it is not always atomic: when doing `mv new existing', there's a critical section where neither the old nor the new version of `existing' actually exists. On some systems moving files from `/tmp' can sometimes cause undesirable (but perfectly valid) warnings, even if you created these files. This is because `/tmp' belongs to a group that ordinary users are not members of, and files created in `/tmp' inherit the group of `/tmp'. When the file is copied, `mv' issues a diagnostic without failing: $ touch /tmp/foo $ mv /tmp/foo . error-->mv: ./foo: set owner/group (was: 100/0): Operation not permitted $ echo $? 0 $ ls foo foo This annoying behavior conforms to Posix, unfortunately. Moving directories across mount points is not portable, use `cp' and `rm'. DOS variants cannot rename or remove open files, and do not support commands like `mv foo bar >foo', even though this is perfectly portable among Posix hosts. `od' In Mac OS X 10.3, `od' does not support the standard Posix options `-A', `-j', `-N', or `-t', or the XSI option `-s'. The only supported Posix option is `-v', and the only supported XSI options are those in `-bcdox'. The BSD `hexdump' program can be used instead. This problem no longer exists in Mac OS X 10.4.3. `rm' The `-f' and `-r' options are portable. It is not portable to invoke `rm' without options or operands. On the other hand, Posix now requires `rm -f' to silently succeed when there are no operands (useful for constructs like `rm -rf $filelist' without first checking if `$filelist' was empty). But this was not always portable; at least NetBSD `rm' built before 2008 would fail with a diagnostic. A file might not be removed even if its parent directory is writable and searchable. Many Posix hosts cannot remove a mount point, a named stream, a working directory, or a last link to a file that is being executed. DOS variants cannot rename or remove open files, and do not support commands like `rm foo >foo', even though this is perfectly portable among Posix hosts. `rmdir' Just as with `rm', some platforms refuse to remove a working directory. `sed' Patterns should not include the separator (unless escaped), even as part of a character class. In conformance with Posix, the Cray `sed' rejects `s/[^/]*$//': use `s%[^/]*$%%'. Even when escaped, patterns should not include separators that are also used as `sed' metacharacters. For example, GNU sed 4.0.9 rejects `s,x\{1\,\},,', while sed 4.1 strips the backslash before the comma before evaluating the basic regular expression. Avoid empty patterns within parentheses (i.e., `\(\)'). Posix does not require support for empty patterns, and Unicos 9 `sed' rejects them. Unicos 9 `sed' loops endlessly on patterns like `.*\n.*'. Sed scripts should not use branch labels longer than 7 characters and should not contain comments; AIX 5.3 `sed' rejects indented comments. HP-UX sed has a limit of 99 commands (not counting `:' commands) and 48 labels, which cannot be circumvented by using more than one script file. It can execute up to 19 reads with the `r' command per cycle. Solaris `/usr/ucb/sed' rejects usages that exceed a limit of about 6000 bytes for the internal representation of commands. Avoid redundant `;', as some `sed' implementations, such as NetBSD 1.4.2's, incorrectly try to interpret the second `;' as a command: $ echo a | sed 's/x/x/;;s/x/x/' sed: 1: "s/x/x/;;s/x/x/": invalid command code ; Some `sed' implementations have a buffer limited to 4000 bytes, and this limits the size of input lines, output lines, and internal buffers that can be processed portably. Likewise, not all `sed' implementations can handle embedded `NUL' or a missing trailing newline. Remember that ranges within a bracket expression of a regular expression are only well-defined in the `C' (or `POSIX') locale. Meanwhile, support for character classes like `[[:upper:]]' is not yet universal, so if you cannot guarantee the setting of `LC_ALL', it is better to spell out a range `[ABCDEFGHIJKLMNOPQRSTUVWXYZ]' than to rely on `[A-Z]'. Additionally, Posix states that regular expressions are only well-defined on characters. Unfortunately, there exist platforms such as MacOS X 10.5 where not all 8-bit byte values are valid characters, even though that platform has a single-byte `C' locale. And Posix allows the existence of a multi-byte `C' locale, although that does not yet appear to be a common implementation. At any rate, it means that not all bytes will be matched by the regular expression `.': $ printf '\200\n' | LC_ALL=C sed -n /./p | wc -l 0 $ printf '\200\n' | LC_ALL=en_US.ISO8859-1 sed -n /./p | wc -l 1 Portable `sed' regular expressions should use `\' only to escape characters in the string `$()*.0123456789[\^n{}'. For example, alternation, `\|', is common but Posix does not require its support, so it should be avoided in portable scripts. Solaris `sed' does not support alternation; e.g., `sed '/a\|b/d'' deletes only lines that contain the literal string `a|b'. Similarly, `\+' and `\?' should be avoided. Anchors (`^' and `$') inside groups are not portable. Nested parentheses in patterns (e.g., `\(\(a*\)b*)\)') are quite portable to current hosts, but was not supported by some ancient `sed' implementations like SVR3. Some `sed' implementations, e.g., Solaris, restrict the special role of the asterisk `*' to one-character regular expressions and back-references, and the special role of interval expressions `\{M\}', `\{M,\}', or `\{M,N\}' to one-character regular expressions. This may lead to unexpected behavior: $ echo '1*23*4' | /usr/bin/sed 's/\(.\)*/x/g' x2x4 $ echo '1*23*4' | /usr/xpg4/bin/sed 's/\(.\)*/x/g' x The `-e' option is mostly portable. However, its argument cannot start with `a', `c', or `i', as this runs afoul of a Tru64 5.1 bug. Also, its argument cannot be empty, as this fails on AIX 5.3. Some people prefer to use `-e': sed -e 'COMMAND-1' \ -e 'COMMAND-2' as opposed to the equivalent: sed ' COMMAND-1 COMMAND-2 ' The following usage is sometimes equivalent: sed 'COMMAND-1;COMMAND-2' but Posix says that this use of a semicolon has undefined effect if COMMAND-1's verb is `{', `a', `b', `c', `i', `r', `t', `w', `:', or `#', so you should use semicolon only with simple scripts that do not use these verbs. Posix up to the 2008 revision requires the argument of the `-e' option to be a syntactically complete script. GNU `sed' allows to pass multiple script fragments, each as argument of a separate `-e' option, that are then combined, with newlines between the fragments, and a future Posix revision may allow this as well. This approach is not portable with script fragments ending in backslash; for example, the `sed' programs on Solaris 10, HP-UX 11, and AIX don't allow splitting in this case: $ echo a | sed -n -e 'i\ 0' 0 $ echo a | sed -n -e 'i\' -e 0 Unrecognized command: 0 In practice, however, this technique of joining fragments through `-e' works for multiple `sed' functions within `{' and `}', even if that is not specified by Posix: $ echo a | sed -n -e '/a/{' -e s/a/b/ -e p -e '}' b Commands inside { } brackets are further restricted. Posix 2008 says that they cannot be preceded by addresses, `!', or `;', and that each command must be followed immediately by a newline, without any intervening blanks or semicolons. The closing bracket must be alone on a line, other than white space preceding or following it. However, a future version of Posix may standardize the use of addresses within brackets. Contrary to yet another urban legend, you may portably use `&' in the replacement part of the `s' command to mean "what was matched". All descendants of Unix version 7 `sed' (at least; we don't have first hand experience with older `sed' implementations) have supported it. Posix requires that you must not have any white space between `!' and the following command. It is OK to have blanks between the address and the `!'. For instance, on Solaris: $ echo "foo" | sed -n '/bar/ ! p' error-->Unrecognized command: /bar/ ! p $ echo "foo" | sed -n '/bar/! p' error-->Unrecognized command: /bar/! p $ echo "foo" | sed -n '/bar/ !p' foo Posix also says that you should not combine `!' and `;'. If you use `!', it is best to put it on a command that is delimited by newlines rather than `;'. Also note that Posix requires that the `b', `t', `r', and `w' commands be followed by exactly one space before their argument. On the other hand, no white space is allowed between `:' and the subsequent label name. If a sed script is specified on the command line and ends in an `a', `c', or `i' command, the last line of inserted text should be followed by a newline. Otherwise some `sed' implementations (e.g., OpenBSD 3.9) do not append a newline to the inserted text. Many `sed' implementations (e.g., MacOS X 10.4, OpenBSD 3.9, Solaris 10 `/usr/ucb/sed') strip leading white space from the text of `a', `c', and `i' commands. Prepend a backslash to work around this incompatibility with Posix: $ echo flushleft | sed 'a\ > indented > ' flushleft indented $ echo foo | sed 'a\ > \ indented > ' flushleft indented Posix requires that with an empty regular expression, the last non-empty regular expression from either an address specification or substitution command is applied. However, busybox 1.6.1 complains when using a substitution command with a replacement containing a back-reference to an empty regular expression; the workaround is repeating the regular expression. $ echo abc | busybox sed '/a\(b\)c/ s//\1/' sed: No previous regexp. $ echo abc | busybox sed '/a\(b\)c/ s/a\(b\)c/\1/' b `sed' (`t') Some old systems have `sed' that "forget" to reset their `t' flag when starting a new cycle. For instance on MIPS RISC/OS, and on IRIX 5.3, if you run the following `sed' script (the line numbers are not actual part of the texts): s/keep me/kept/g # a t end # b s/.*/deleted/g # c :end # d on delete me # 1 delete me # 2 keep me # 3 delete me # 4 you get deleted delete me kept deleted instead of deleted deleted kept deleted Why? When processing line 1, (c) matches, therefore sets the `t' flag, and the output is produced. When processing line 2, the `t' flag is still set (this is the bug). Command (a) fails to match, but `sed' is not supposed to clear the `t' flag when a substitution fails. Command (b) sees that the flag is set, therefore it clears it, and jumps to (d), hence you get `delete me' instead of `deleted'. When processing line (3), `t' is clear, (a) matches, so the flag is set, hence (b) clears the flags and jumps. Finally, since the flag is clear, line 4 is processed properly. There are two things one should remember about `t' in `sed'. Firstly, always remember that `t' jumps if _some_ substitution succeeded, not only the immediately preceding substitution. Therefore, always use a fake `t clear' followed by a `:clear' on the next line, to reset the `t' flag where needed. Secondly, you cannot rely on `sed' to clear the flag at each new cycle. One portable implementation of the script above is: t clear :clear s/keep me/kept/g t end s/.*/deleted/g :end `sleep' Using `sleep' is generally portable. However, remember that adding a `sleep' to work around timestamp issues, with a minimum granularity of one second, doesn't scale well for parallel builds on modern machines with sub-second process completion. `sort' Remember that sort order is influenced by the current locale. Inside `configure', the C locale is in effect, but in Makefile snippets, you may need to specify `LC_ALL=C sort'. `tar' There are multiple file formats for `tar'; if you use Automake, the macro `AM_INIT_AUTOMAKE' has some options controlling which level of portability to use. `touch' If you specify the desired timestamp (e.g., with the `-r' option), older `touch' implementations use the `utime' or `utimes' system call, which can result in the same kind of timestamp truncation problems that `cp -p' has. On ancient BSD systems, `touch' or any command that results in an empty file does not update the timestamps, so use a command like `echo' as a workaround. Also, GNU `touch' 3.16r (and presumably all before that) fails to work on SunOS 4.1.3 when the empty file is on an NFS-mounted 4.2 volume. However, these problems are no longer of practical concern. `tr' Not all versions of `tr' handle all backslash character escapes. For example, Solaris 10 `/usr/ucb/tr' falls over, even though Solaris contains more modern `tr' in other locations. Using octal escapes is more portable for carriage returns, since `\015' is the same for both ASCII and EBCDIC, and since use of literal carriage returns in scripts causes a number of other problems. But for other characters, like newline, using octal escapes ties the operation to ASCII, so it is better to use literal characters. $ { echo moon; echo light; } | /usr/ucb/tr -d '\n' ; echo moo light $ { echo moon; echo light; } | /usr/bin/tr -d '\n' ; echo moonlight $ { echo moon; echo light; } | /usr/ucb/tr -d '\012' ; echo moonlight $ nl=' '; { echo moon; echo light; } | /usr/ucb/tr -d "$nl" ; echo moonlight Not all versions of `tr' recognize direct ranges of characters: at least Solaris `/usr/bin/tr' still fails to do so. But you can use `/usr/xpg4/bin/tr' instead, or add brackets (which in Posix transliterate to themselves). $ echo "Hazy Fantazy" | LC_ALL=C /usr/bin/tr a-z A-Z HAZy FAntAZy $ echo "Hazy Fantazy" | LC_ALL=C /usr/bin/tr '[a-z]' '[A-Z]' HAZY FANTAZY $ echo "Hazy Fantazy" | LC_ALL=C /usr/xpg4/bin/tr a-z A-Z HAZY FANTAZY When providing two arguments, be sure the second string is at least as long as the first. $ echo abc | /usr/xpg4/bin/tr bc d adc $ echo abc | coreutils/tr bc d add Posix requires `tr' to operate on binary files. But at least Solaris `/usr/ucb/tr' and `/usr/bin/tr' silently discard `NUL' in the input prior to doing any translation. When using `tr' to process a binary file that may contain `NUL' bytes, it is necessary to use `/usr/xpg4/bin/tr' instead, or `/usr/xpg6/bin/tr' if that is available. $ printf 'a\0b' | /usr/ucb/tr x x | od -An -tx1 61 62 $ printf 'a\0b' | /usr/bin/tr x x | od -An -tx1 61 62 $ printf 'a\0b' | /usr/xpg4/bin/tr x x | od -An -tx1 61 00 62 Solaris `/usr/ucb/tr' additionally fails to handle `\0' as the octal escape for `NUL'. $ printf 'abc' | /usr/ucb/tr 'bc' '\0d' | od -An -tx1 61 62 63 $ printf 'abc' | /usr/bin/tr 'bc' '\0d' | od -An -tx1 61 00 64 $ printf 'abc' | /usr/xpg4/bin/tr 'bc' '\0d' | od -An -tx1 61 00 64  File: autoconf.info, Node: Portable Make, Next: Portable C and C++, Prev: Portable Shell, Up: Top 12 Portable Make Programming **************************** Writing portable makefiles is an art. Since a makefile's commands are executed by the shell, you must consider the shell portability issues already mentioned. However, other issues are specific to `make' itself. * Menu: * $< in Ordinary Make Rules:: $< in ordinary rules * Failure in Make Rules:: Failing portably in rules * Special Chars in Names:: Special Characters in Macro Names * Backslash-Newline-Empty:: Empty lines after backslash-newline * Backslash-Newline Comments:: Spanning comments across line boundaries * Long Lines in Makefiles:: Line length limitations * Macros and Submakes:: `make macro=value' and submakes * The Make Macro MAKEFLAGS:: `$(MAKEFLAGS)' portability issues * The Make Macro SHELL:: `$(SHELL)' portability issues * Parallel Make:: Parallel `make' quirks * Comments in Make Rules:: Other problems with Make comments * Newlines in Make Rules:: Using literal newlines in rules * Comments in Make Macros:: Other problems with Make comments in macros * Trailing whitespace in Make Macros:: Macro substitution problems * Command-line Macros and whitespace:: Whitespace trimming of values * obj/ and Make:: Don't name a subdirectory `obj' * make -k Status:: Exit status of `make -k' * VPATH and Make:: `VPATH' woes * Single Suffix Rules:: Single suffix rules and separated dependencies * Timestamps and Make:: Subsecond timestamp resolution  File: autoconf.info, Node: $< in Ordinary Make Rules, Next: Failure in Make Rules, Up: Portable Make 12.1 `$<' in Ordinary Make Rules ================================ Posix says that the `$<' construct in makefiles can be used only in inference rules and in the `.DEFAULT' rule; its meaning in ordinary rules is unspecified. Solaris `make' for instance replaces it with the empty string. OpenBSD (3.0 and later) `make' diagnoses these uses and errors out.  File: autoconf.info, Node: Failure in Make Rules, Next: Special Chars in Names, Prev: $< in Ordinary Make Rules, Up: Portable Make 12.2 Failure in Make Rules ========================== Posix 2008 requires that `make' must invoke each command with the equivalent of a `sh -e -c' subshell, which causes the subshell to exit immediately if a subsidiary simple-command fails, although not all `make' implementations have historically followed this rule. For example, the command `touch T; rm -f U' may attempt to remove `U' even if the `touch' fails, although this is not permitted with Posix make. One way to work around failures in simple commands is to reword them so that they always succeed, e.g., `touch T || :; rm -f U'. However, even this approach can run into common bugs in BSD implementations of the `-e' option of `sh' and `set' (*note Limitations of Shell Builtins: set.), so if you are worried about porting to buggy BSD shells it may be simpler to migrate complicated `make' actions into separate scripts.  File: autoconf.info, Node: Special Chars in Names, Next: Backslash-Newline-Empty, Prev: Failure in Make Rules, Up: Portable Make 12.3 Special Characters in Make Macro Names =========================================== Posix limits macro names to nonempty strings containing only ASCII letters and digits, `.', and `_'. Many `make' implementations allow a wider variety of characters, but portable makefiles should avoid them. It is portable to start a name with a special character, e.g., `$(.FOO)'. Some ancient `make' implementations don't support leading underscores in macro names. An example is NEWS-OS 4.2R. $ cat Makefile _am_include = # _am_quote = all:; @echo this is test $ make Make: Must be a separator on rules line 2. Stop. $ cat Makefile2 am_include = # am_quote = all:; @echo this is test $ make -f Makefile2 this is test However, this problem is no longer of practical concern.  File: autoconf.info, Node: Backslash-Newline-Empty, Next: Backslash-Newline Comments, Prev: Special Chars in Names, Up: Portable Make 12.4 Backslash-Newline Before Empty Lines ========================================= A bug in Bash 2.03 can cause problems if a Make rule contains a backslash-newline followed by line that expands to nothing. For example, on Solaris 8: SHELL = /bin/bash EMPTY = foo: touch foo \ $(EMPTY) executes /bin/bash -c 'touch foo \ ' which fails with a syntax error, due to the Bash bug. To avoid this problem, avoid nullable macros in the last line of a multiline command. On some versions of HP-UX, `make' reads multiple newlines following a backslash, continuing to the next non-empty line. For example, FOO = one \ BAR = two test: : FOO is "$(FOO)" : BAR is "$(BAR)" shows `FOO' equal to `one BAR = two'. Other implementations sensibly let a backslash continue only to the immediately following line.  File: autoconf.info, Node: Backslash-Newline Comments, Next: Long Lines in Makefiles, Prev: Backslash-Newline-Empty, Up: Portable Make 12.5 Backslash-Newline in Make Comments ======================================= According to Posix, Make comments start with `#' and continue until an unescaped newline is reached. $ cat Makefile # A = foo \ bar \ baz all: @echo ok $ make # GNU make ok However this is not always the case. Some implementations discard everything from `#' through the end of the line, ignoring any trailing backslash. $ pmake # BSD make "Makefile", line 3: Need an operator Fatal errors encountered -- cannot continue Therefore, if you want to comment out a multi-line definition, prefix each line with `#', not only the first. # A = foo \ # bar \ # baz  File: autoconf.info, Node: Long Lines in Makefiles, Next: Macros and Submakes, Prev: Backslash-Newline Comments, Up: Portable Make 12.6 Long Lines in Makefiles ============================ Tru64 5.1's `make' has been reported to crash when given a makefile with lines longer than around 20 kB. Earlier versions are reported to exit with `Line too long' diagnostics.  File: autoconf.info, Node: Macros and Submakes, Next: The Make Macro MAKEFLAGS, Prev: Long Lines in Makefiles, Up: Portable Make 12.7 `make macro=value' and Submakes ==================================== A command-line variable definition such as `foo=bar' overrides any definition of `foo' in a makefile. Some `make' implementations (such as GNU `make') propagate this override to subsidiary invocations of `make'. Some other implementations do not pass the substitution along to submakes. $ cat Makefile foo = foo one: @echo $(foo) $(MAKE) two two: @echo $(foo) $ make foo=bar # GNU make 3.79.1 bar make two make[1]: Entering directory `/home/adl' bar make[1]: Leaving directory `/home/adl' $ pmake foo=bar # BSD make bar pmake two foo You have a few possibilities if you do want the `foo=bar' override to propagate to submakes. One is to use the `-e' option, which causes all environment variables to have precedence over the makefile macro definitions, and declare foo as an environment variable: $ env foo=bar make -e The `-e' option is propagated to submakes automatically, and since the environment is inherited between `make' invocations, the `foo' macro is overridden in submakes as expected. This syntax (`foo=bar make -e') is portable only when used outside of a makefile, for instance from a script or from the command line. When run inside a `make' rule, GNU `make' 3.80 and prior versions forget to propagate the `-e' option to submakes. Moreover, using `-e' could have unexpected side effects if your environment contains some other macros usually defined by the makefile. (See also the note about `make -e' and `SHELL' below.) If you can foresee all macros that a user might want to override, then you can propagate them to submakes manually, from your makefile: foo = foo one: @echo $(foo) $(MAKE) foo=$(foo) two two: @echo $(foo) Another way to propagate a variable to submakes in a portable way is to expand an extra variable in every invocation of `$(MAKE)' within your makefile: foo = foo one: @echo $(foo) $(MAKE) $(SUBMAKEFLAGS) two two: @echo $(foo) Users must be aware that this technique is in use to take advantage of it, e.g. with `make foo=bar SUBMAKEFLAGS='foo=bar'', but it allows any macro to be overridden. Makefiles generated by `automake' use this technique, expanding `$(AM_MAKEFLAGS)' on the command lines of submakes (*note Automake: (automake)Subdirectories.).  File: autoconf.info, Node: The Make Macro MAKEFLAGS, Next: The Make Macro SHELL, Prev: Macros and Submakes, Up: Portable Make 12.8 The Make Macro MAKEFLAGS ============================= Posix requires `make' to use `MAKEFLAGS' to affect the current and recursive invocations of make, but allows implementations several formats for the variable. It is tricky to parse `$MAKEFLAGS' to determine whether `-s' for silent execution or `-k' for continued execution are in effect. For example, you cannot assume that the first space-separated word in `$MAKEFLAGS' contains single-letter options, since in the Cygwin version of GNU `make' it is either `--unix' or `--win32' with the second word containing single-letter options. $ cat Makefile all: @echo MAKEFLAGS = $(MAKEFLAGS) $ make MAKEFLAGS = --unix $ make -k MAKEFLAGS = --unix -k  File: autoconf.info, Node: The Make Macro SHELL, Next: Parallel Make, Prev: The Make Macro MAKEFLAGS, Up: Portable Make 12.9 The Make Macro `SHELL' =========================== Posix-compliant `make' internally uses the `$(SHELL)' macro to spawn shell processes and execute Make rules. This is a builtin macro supplied by `make', but it can be modified by a makefile or by a command-line argument. Not all `make' implementations define this `SHELL' macro. Tru64 `make' is an example; this implementation always uses `/bin/sh'. So it's a good idea to always define `SHELL' in your makefiles. If you use Autoconf, do SHELL = @SHELL@ If you use Automake, this is done for you. Do not force `SHELL = /bin/sh' because that is not correct everywhere. Remember, `/bin/sh' is not Posix compliant on many systems, such as FreeBSD 4, NetBSD 3, AIX 3, Solaris 10, or Tru64. Additionally, DJGPP lacks `/bin/sh', and when its GNU `make' port sees such a setting it enters a special emulation mode where features like pipes and redirections are emulated on top of DOS's `command.com'. Unfortunately this emulation is incomplete; for instance it does not handle command substitutions. Using `@SHELL@' means that your makefile will benefit from the same improved shell, such as `bash' or `ksh', that was discovered during `configure', so that you aren't fighting two different sets of shell bugs between the two contexts. Posix-compliant `make' should never acquire the value of $(SHELL) from the environment, even when `make -e' is used (otherwise, think about what would happen to your rules if `SHELL=/bin/tcsh'). However not all `make' implementations have this exception. For instance it's not surprising that Tru64 `make' doesn't protect `SHELL', since it doesn't use it. $ cat Makefile SHELL = /bin/sh FOO = foo all: @echo $(SHELL) @echo $(FOO) $ env SHELL=/bin/tcsh FOO=bar make -e # Tru64 Make /bin/tcsh bar $ env SHELL=/bin/tcsh FOO=bar gmake -e # GNU make /bin/sh bar Conversely, `make' is not supposed to export any changes to the macro `SHELL' to child processes. Again, many implementations break this rule: $ cat Makefile all: @echo $(SHELL) @printenv SHELL $ env SHELL=sh make -e SHELL=/bin/ksh # BSD Make, GNU make 3.80 /bin/ksh /bin/ksh $ env SHELL=sh gmake -e SHELL=/bin/ksh # GNU make 3.81 /bin/ksh sh  File: autoconf.info, Node: Parallel Make, Next: Comments in Make Rules, Prev: The Make Macro SHELL, Up: Portable Make 12.10 Parallel Make =================== Support for parallel execution in `make' implementation varies. Generally, using GNU make is your best bet. When NetBSD or FreeBSD `make' are run in parallel mode, they will reuse the same shell for multiple commands within one recipe. This can have various unexpected consequences. For example, changes of directories or variables persist between recipes, so that: all: @var=value; cd /; pwd; echo $$var; echo $$$$ @pwd; echo $$var; echo $$$$ may output the following with `make -j1', at least on NetBSD up to 5.1 and FreeBSD up to 8.2: / value 32235 / value 32235 while without `-j1', or with `-B', the output looks less surprising: / value 32238 /tmp 32239 Another consequence is that, if one command in a recipe uses `exit 0' to indicate a successful exit, the shell will be gone and the remaining commands of this recipe will not be executed. The BSD `make' implementations, when run in parallel mode, will also pass the `Makefile' recipes to the shell through its standard input, thus making it unusable from the recipes: $ cat Makefile read: @read line; echo LINE: $$line $ echo foo | make read LINE: foo $ echo foo | make -j1 read # NetBSD 5.1 and FreeBSD 8.2 LINE: Moreover, when FreeBSD `make' (up at least to 8.2) is run in parallel mode, it implements the `@' and `-' "recipe modifiers" by dynamically modifying the active shell flags. This behavior has the effects of potentially clobbering the exit status of recipes silenced with the `@' modifier if they also unset the `errexit' shell flag, and of mangling the output in unexpected ways: $ cat Makefile a: @echo $$-; set +e; false b: -echo $$-; false; echo set - $ make a; echo status: $? ehBc *** Error code 1 status: 1 $ make -j1 a; echo status: $? ehB status: 0 $ make b echo $-; echo set - hBc set - $ make -j1 b echo $-; echo hvB You can avoid all these issues by using the `-B' option to enable compatibility semantics. However, that will effectively also disable all parallelism as that will cause prerequisites to be updated in the order they are listed in a rule. Some make implementations (among them, FreeBSD `make', NetBSD `make', and Solaris `dmake'), when invoked with a `-jN' option, connect the standard output and standard error of all their child processes to pipes or temporary regular files. This can lead to subtly different semantics in the behavior of the spawned processes. For example, even if the `make' standard output is connected to a tty, the recipe command will not be: $ cat Makefile all: @test -t 1 && echo "Is a tty" || echo "Is not a tty" $ make -j 2 # FreeBSD 8.2 make Is not a tty $ make -j 2 # NetBSD 5.1 make --- all --- Is not a tty $ dmake -j 2 # Solaris 10 dmake HOSTNAME --> 1 job HOSTNAME --> Job output Is not a tty On the other hand: $ make -j 2 # GNU make, Heirloom make Is a tty The above examples also show additional status output produced in parallel mode for targets being updated by Solaris `dmake' and NetBSD `make' (but _not_ by FreeBSD `make'). Furthermore, parallel runs of those `make' implementations will route standard error from commands that they spawn into their own standard output, and may remove leading whitespace from output lines.  File: autoconf.info, Node: Comments in Make Rules, Next: Newlines in Make Rules, Prev: Parallel Make, Up: Portable Make 12.11 Comments in Make Rules ============================ Never put comments in a rule. Some `make' treat anything starting with a tab as a command for the current rule, even if the tab is immediately followed by a `#'. The `make' from Tru64 Unix V5.1 is one of them. The following makefile runs `# foo' through the shell. all: # foo As a workaround, you can use the `:' no-op command with a string argument that gets ignored: all: : "foo" Conversely, if you want to use the `#' character in some command, you can only do so by expanding it inside a rule (*note Comments in Make Macros::). So for example, if `COMMENT_CHAR' is substituted by `config.status' as `#', then the following substitutes `@COMMENT_CHAR@' in a generated header: foo.h: foo.h.in sed -e 's|@''COMMENT_CHAR''@|@COMMENT_CHAR@|g' \ $(srcdir)/foo.h.in > $@ The funny shell quoting avoids a substitution at `config.status' run time of the left-hand side of the `sed' `s' command.  File: autoconf.info, Node: Newlines in Make Rules, Next: Comments in Make Macros, Prev: Comments in Make Rules, Up: Portable Make 12.12 Newlines in Make Rules ============================ In shell scripts, newlines can be used inside string literals. But in the shell statements of `Makefile' rules, this is not possible: A newline not preceded by a backslash is a separator between shell statements. Whereas a newline that is preceded by a backslash becomes part of the shell statement according to POSIX, but gets replaced, together with the backslash that precedes it, by a space in GNU `make' 3.80 and older. So, how can a newline be used in a string literal? The trick is to set up a shell variable that contains a newline: nlinit=`echo 'nl="'; echo '"'`; eval "$$nlinit" For example, in order to create a multiline `sed' expression that inserts a blank line after every line of a file, this code can be used: nlinit=`echo 'nl="'; echo '"'`; eval "$$nlinit"; \ sed -e "s/\$$/\\$${nl}/" < input > output  File: autoconf.info, Node: Comments in Make Macros, Next: Trailing whitespace in Make Macros, Prev: Newlines in Make Rules, Up: Portable Make 12.13 Comments in Make Macros ============================= Avoid putting comments in macro values as far as possible. Posix specifies that the text starting from the `#' sign until the end of the line is to be ignored, which has the unfortunate effect of disallowing them even within quotes. Thus, the following might lead to a syntax error at compile time: CPPFLAGS = "-DCOMMENT_CHAR='#'" as `CPPFLAGS' may be expanded to `"-DCOMMENT_CHAR=''. Most `make' implementations disregard this and treat single and double quotes specially here. Also, GNU `make' lets you put `#' into a macro value by escaping it with a backslash, i.e., `\#'. However, neither of these usages are portable. *Note Comments in Make Rules::, for a portable alternative. Even without quoting involved, comments can have surprising effects, because the whitespace before them is part of the variable value: foo = bar # trailing comment print: ; @echo "$(foo)." prints `bar .', which is usually not intended, and can expose `make' bugs as described below.  File: autoconf.info, Node: Trailing whitespace in Make Macros, Next: Command-line Macros and whitespace, Prev: Comments in Make Macros, Up: Portable Make 12.14 Trailing whitespace in Make Macros ======================================== GNU `make' 3.80 mistreats trailing whitespace in macro substitutions and appends another spurious suffix: empty = foo = bar $(empty) print: ; @echo $(foo:=.test) prints `bar.test .test'. BSD and Solaris `make' implementations do not honor trailing whitespace in macro definitions as Posix requires: foo = bar # Note the space after "bar". print: ; @echo $(foo)t prints `bart' instead of `bar t'. To work around this, you can use a helper macro as in the previous example.  File: autoconf.info, Node: Command-line Macros and whitespace, Next: obj/ and Make, Prev: Trailing whitespace in Make Macros, Up: Portable Make 12.15 Command-line Macros and whitespace ======================================== Some `make' implementations may strip trailing whitespace off of macros set on the command line in addition to leading whitespace. Further, some may strip leading whitespace off of macros set from environment variables: $ echo 'print: ; @echo "x$(foo)x$(bar)x"' | foo=' f f ' make -f - bar=' b b ' x f f xb b x # AIX, BSD, GNU make xf f xb b x # HP-UX, IRIX, Tru64/OSF make x f f xb bx # Solaris make  File: autoconf.info, Node: obj/ and Make, Next: make -k Status, Prev: Command-line Macros and whitespace, Up: Portable Make 12.16 The `obj/' Subdirectory and Make ====================================== Never name one of your subdirectories `obj/' if you don't like surprises. If an `obj/' directory exists, BSD `make' enters it before reading the makefile. Hence the makefile in the current directory is not read. $ cat Makefile all: echo Hello $ cat obj/Makefile all: echo World $ make # GNU make echo Hello Hello $ pmake # BSD make echo World World  File: autoconf.info, Node: make -k Status, Next: VPATH and Make, Prev: obj/ and Make, Up: Portable Make 12.17 Exit Status of `make -k' ============================== Do not rely on the exit status of `make -k'. Some implementations reflect whether they encountered an error in their exit status; other implementations always succeed. $ cat Makefile all: false $ make -k; echo exit status: $? # GNU make false make: *** [all] Error 1 exit status: 2 $ pmake -k; echo exit status: $? # BSD make false *** Error code 1 (continuing) exit status: 0  File: autoconf.info, Node: VPATH and Make, Next: Single Suffix Rules, Prev: make -k Status, Up: Portable Make 12.18 `VPATH' and Make ====================== Posix does not specify the semantics of `VPATH'. Typically, `make' supports `VPATH', but its implementation is not consistent. Autoconf and Automake support makefiles whose usages of `VPATH' are portable to recent-enough popular implementations of `make', but to keep the resulting makefiles portable, a package's makefile prototypes must take the following issues into account. These issues are complicated and are often poorly understood, and installers who use `VPATH' should expect to find many bugs in this area. If you use `VPATH', the simplest way to avoid these portability bugs is to stick with GNU `make', since it is the most commonly-used `make' among Autoconf users. Here are some known issues with some `VPATH' implementations. * Menu: * Variables listed in VPATH:: `VPATH' must be literal on ancient hosts * VPATH and Double-colon:: Problems with `::' on ancient hosts * $< in Explicit Rules:: `$<' does not work in ordinary rules * Automatic Rule Rewriting:: `VPATH' goes wild on Solaris * Tru64 Directory Magic:: `mkdir' goes wild on Tru64 * Make Target Lookup:: More details about `VPATH' lookup  File: autoconf.info, Node: Variables listed in VPATH, Next: VPATH and Double-colon, Up: VPATH and Make 12.18.1 Variables listed in `VPATH' ----------------------------------- Do not set `VPATH' to the value of another variable, for example `VPATH = $(srcdir)', because some ancient versions of `make' do not do variable substitutions on the value of `VPATH'. For example, use this srcdir = @srcdir@ VPATH = @srcdir@ rather than `VPATH = $(srcdir)'. Note that with GNU Automake, there is no need to set this yourself.  File: autoconf.info, Node: VPATH and Double-colon, Next: $< in Explicit Rules, Prev: Variables listed in VPATH, Up: VPATH and Make 12.18.2 `VPATH' and Double-colon Rules -------------------------------------- With ancient versions of Sun `make', any assignment to `VPATH' causes `make' to execute only the first set of double-colon rules. However, this problem is no longer of practical concern.  File: autoconf.info, Node: $< in Explicit Rules, Next: Automatic Rule Rewriting, Prev: VPATH and Double-colon, Up: VPATH and Make 12.18.3 `$<' Not Supported in Explicit Rules -------------------------------------------- Using `$<' in explicit rules is not portable. The prerequisite file must be named explicitly in the rule. If you want to find the prerequisite via a `VPATH' search, you have to code the whole thing manually. *Note Build Directories::.  File: autoconf.info, Node: Automatic Rule Rewriting, Next: Tru64 Directory Magic, Prev: $< in Explicit Rules, Up: VPATH and Make 12.18.4 Automatic Rule Rewriting -------------------------------- Some `make' implementations, such as Solaris and Tru64, search for prerequisites in `VPATH' and then rewrite each occurrence as a plain word in the rule. For instance: # This isn't portable to GNU make. VPATH = ../pkg/src f.c: if.c cp if.c f.c executes `cp ../pkg/src/if.c f.c' if `if.c' is found in `../pkg/src'. However, this rule leads to real problems in practice. For example, if the source directory contains an ordinary file named `test' that is used in a dependency, Solaris `make' rewrites commands like `if test -r foo; ...' to `if ../pkg/src/test -r foo; ...', which is typically undesirable. In fact, `make' is completely unaware of shell syntax used in the rules, so the VPATH rewrite can potentially apply to _any_ whitespace-separated word in a rule, including shell variables, functions, and keywords. $ mkdir build $ cd build $ cat > Makefile <<'END' VPATH = .. all: arg func for echo func () { for arg in "$$@"; do echo $$arg; done; }; \ func "hello world" END $ touch ../arg ../func ../for ../echo $ make ../func () { ../for ../arg in "$@"; do ../echo $arg; done; }; \ ../func "hello world" sh: syntax error at line 1: `do' unexpected *** Error code 2 To avoid this problem, portable makefiles should never mention a source file or dependency whose name is that of a shell keyword like `for' or `until', a shell command like `cat' or `gcc' or `test', or a shell function or variable used in the corresponding `Makefile' recipe. Because of these problems GNU `make' and many other `make' implementations do not rewrite commands, so portable makefiles should search `VPATH' manually. It is tempting to write this: # This isn't portable to Solaris make. VPATH = ../pkg/src f.c: if.c cp `test -f if.c || echo $(VPATH)/`if.c f.c However, the "prerequisite rewriting" still applies here. So if `if.c' is in `../pkg/src', Solaris and Tru64 `make' execute cp `test -f ../pkg/src/if.c || echo ../pkg/src/`if.c f.c which reduces to cp if.c f.c and thus fails. Oops. A simple workaround, and good practice anyway, is to use `$?' and `$@' when possible: VPATH = ../pkg/src f.c: if.c cp $? $@ but this does not generalize well to commands with multiple prerequisites. A more general workaround is to rewrite the rule so that the prerequisite `if.c' never appears as a plain word. For example, these three rules would be safe, assuming `if.c' is in `../pkg/src' and the other files are in the working directory: VPATH = ../pkg/src f.c: if.c f1.c cat `test -f ./if.c || echo $(VPATH)/`if.c f1.c >$@ g.c: if.c g1.c cat `test -f 'if.c' || echo $(VPATH)/`if.c g1.c >$@ h.c: if.c h1.c cat `test -f "if.c" || echo $(VPATH)/`if.c h1.c >$@ Things get worse when your prerequisites are in a macro. VPATH = ../pkg/src HEADERS = f.h g.h h.h install-HEADERS: $(HEADERS) for i in $(HEADERS); do \ $(INSTALL) -m 644 \ `test -f $$i || echo $(VPATH)/`$$i \ $(DESTDIR)$(includedir)/$$i; \ done The above `install-HEADERS' rule is not Solaris-proof because `for i in $(HEADERS);' is expanded to `for i in f.h g.h h.h;' where `f.h' and `g.h' are plain words and are hence subject to `VPATH' adjustments. If the three files are in `../pkg/src', the rule is run as: for i in ../pkg/src/f.h ../pkg/src/g.h h.h; do \ install -m 644 \ `test -f $i || echo ../pkg/src/`$i \ /usr/local/include/$i; \ done where the two first `install' calls fail. For instance, consider the `f.h' installation: install -m 644 \ `test -f ../pkg/src/f.h || \ echo ../pkg/src/ \ `../pkg/src/f.h \ /usr/local/include/../pkg/src/f.h; It reduces to: install -m 644 \ ../pkg/src/f.h \ /usr/local/include/../pkg/src/f.h; Note that the manual `VPATH' search did not cause any problems here; however this command installs `f.h' in an incorrect directory. Trying to quote `$(HEADERS)' in some way, as we did for `foo.c' a few makefiles ago, does not help: install-HEADERS: $(HEADERS) headers='$(HEADERS)'; \ for i in $$headers; do \ $(INSTALL) -m 644 \ `test -f $$i || echo $(VPATH)/`$$i \ $(DESTDIR)$(includedir)/$$i; \ done Now, `headers='$(HEADERS)'' macro-expands to: headers='f.h g.h h.h' but `g.h' is still a plain word. (As an aside, the idiom `headers='$(HEADERS)'; for i in $$headers;' is a good idea if `$(HEADERS)' can be empty, because some shells diagnose a syntax error on `for i in;'.) One workaround is to strip this unwanted `../pkg/src/' prefix manually: VPATH = ../pkg/src HEADERS = f.h g.h h.h install-HEADERS: $(HEADERS) headers='$(HEADERS)'; \ for i in $$headers; do \ i=`expr "$$i" : '$(VPATH)/\(.*\)'`; $(INSTALL) -m 644 \ `test -f $$i || echo $(VPATH)/`$$i \ $(DESTDIR)$(includedir)/$$i; \ done Automake does something similar. However the above hack works only if the files listed in `HEADERS' are in the current directory or a subdirectory; they should not be in an enclosing directory. If we had `HEADERS = ../f.h', the above fragment would fail in a VPATH build with Tru64 `make'. The reason is that not only does Tru64 `make' rewrite dependencies, but it also simplifies them. Hence `../f.h' becomes `../pkg/f.h' instead of `../pkg/src/../f.h'. This obviously defeats any attempt to strip a leading `../pkg/src/' component. The following example makes the behavior of Tru64 `make' more apparent. $ cat Makefile VPATH = sub all: ../foo echo ../foo $ ls Makefile foo $ make echo foo foo Dependency `../foo' was found in `sub/../foo', but Tru64 `make' simplified it as `foo'. (Note that the `sub/' directory does not even exist, this just means that the simplification occurred before the file was checked for.) For the record here is how SunOS 4 `make' behaves on this example. $ make make: Fatal error: Don't know how to make target `../foo' $ mkdir sub $ make echo sub/../foo sub/../foo  File: autoconf.info, Node: Tru64 Directory Magic, Next: Make Target Lookup, Prev: Automatic Rule Rewriting, Up: VPATH and Make 12.18.5 Tru64 `make' Creates Prerequisite Directories Magically --------------------------------------------------------------- When a prerequisite is a subdirectory of `VPATH', Tru64 `make' creates it in the current directory. $ mkdir -p foo/bar build $ cd build $ cat >Makefile <dest-stamp Apart from timestamp resolution, there are also differences in handling equal timestamps. HP-UX `make' updates targets if it has the same time stamp as one of its prerequisites, in violation of Posix rules. This can cause spurious rebuilds for repeated runs of `make'. This in turn can cause `make' to fail if it tries to rebuild generated files in a possibly read-only source tree with tools not present on the end-user machine. Use GNU `make' instead.  File: autoconf.info, Node: Portable C and C++, Next: Manual Configuration, Prev: Portable Make, Up: Top 13 Portable C and C++ Programming ********************************* C and C++ programs often use low-level features of the underlying system, and therefore are often more difficult to make portable to other platforms. Several standards have been developed to help make your programs more portable. If you write programs with these standards in mind, you can have greater confidence that your programs work on a wide variety of systems. *Note Language Standards Supported by GCC: (gcc)Standards, for a list of C-related standards. Many programs also assume the Posix standard (http://www.opengroup.org/susv3). Some old code is written to be portable to K&R C, which predates any C standard. K&R C compilers are no longer of practical interest, though, and the rest of section assumes at least C89, the first C standard. Program portability is a huge topic, and this section can only briefly introduce common pitfalls. *Note Portability between System Types: (standards)System Portability, for more information. * Menu: * Varieties of Unportability:: How to make your programs unportable * Integer Overflow:: When integers get too large * Preprocessor Arithmetic:: `#if' expression problems * Null Pointers:: Properties of null pointers * Buffer Overruns:: Subscript errors and the like * Volatile Objects:: `volatile' and signals * Floating Point Portability:: Portable floating-point arithmetic * Exiting Portably:: Exiting and the exit status  File: autoconf.info, Node: Varieties of Unportability, Next: Integer Overflow, Up: Portable C and C++ 13.1 Varieties of Unportability =============================== Autoconf tests and ordinary programs often need to test what is allowed on a system, and therefore they may need to deliberately exceed the boundaries of what the standards allow, if only to see whether an optional feature is present. When you write such a program, you should keep in mind the difference between constraints, unspecified behavior, and undefined behavior. In C, a "constraint" is a rule that the compiler must enforce. An example constraint is that C programs must not declare a bit-field with negative width. Tests can therefore reliably assume that programs with negative-width bit-fields are rejected by a compiler that conforms to the standard. "Unspecified behavior" is valid behavior, where the standard allows multiple possibilities. For example, the order of evaluation of function arguments is unspecified. Some unspecified behavior is "implementation-defined", i.e., documented by the implementation, but since Autoconf tests cannot read the documentation they cannot distinguish between implementation-defined and other unspecified behavior. It is common for Autoconf tests to probe implementations to determine otherwise-unspecified behavior. "Undefined behavior" is invalid behavior, where the standard allows the implementation to do anything it pleases. For example, dereferencing a null pointer leads to undefined behavior. If possible, test programs should avoid undefined behavior, since a program with undefined behavior might succeed on a test that should fail. The above rules apply to programs that are intended to conform to the standard. However, strictly-conforming programs are quite rare, since the standards are so limiting. A major goal of Autoconf is to support programs that use implementation features not described by the standard, and it is fairly common for test programs to violate the above rules, if the programs work well enough in practice.  File: autoconf.info, Node: Integer Overflow, Next: Preprocessor Arithmetic, Prev: Varieties of Unportability, Up: Portable C and C++ 13.2 Integer Overflow ===================== In practice many portable C programs assume that signed integer overflow wraps around reliably using two's complement arithmetic. Yet the C standard says that program behavior is undefined on overflow, and in a few cases C programs do not work on some modern implementations because their overflows do not wrap around as their authors expected. Conversely, in signed integer remainder, the C standard requires overflow behavior that is commonly not implemented. * Menu: * Integer Overflow Basics:: Why integer overflow is a problem * Signed Overflow Examples:: Examples of code assuming wraparound * Optimization and Wraparound:: Optimizations that break uses of wraparound * Signed Overflow Advice:: Practical advice for signed overflow issues * Signed Integer Division:: `INT_MIN / -1' and `INT_MIN % -1'  File: autoconf.info, Node: Integer Overflow Basics, Next: Signed Overflow Examples, Up: Integer Overflow 13.2.1 Basics of Integer Overflow --------------------------------- In languages like C, unsigned integer overflow reliably wraps around; e.g., `UINT_MAX + 1' yields zero. This is guaranteed by the C standard and is portable in practice, unless you specify aggressive, nonstandard optimization options suitable only for special applications. In contrast, the C standard says that signed integer overflow leads to undefined behavior where a program can do anything, including dumping core or overrunning a buffer. The misbehavior can even precede the overflow. Such an overflow can occur during addition, subtraction, multiplication, division, and left shift. Despite this requirement of the standard, many C programs and Autoconf tests assume that signed integer overflow silently wraps around modulo a power of two, using two's complement arithmetic, so long as you cast the resulting value to a signed integer type or store it into a signed integer variable. If you use conservative optimization flags, such programs are generally portable to the vast majority of modern platforms, with a few exceptions discussed later. For historical reasons the C standard also allows implementations with ones' complement or signed magnitude arithmetic, but it is safe to assume two's complement nowadays. Also, overflow can occur when converting an out-of-range value to a signed integer type. Here a standard implementation must define what happens, but this might include raising an exception. In practice all known implementations support silent wraparound in this case, so you need not worry about other possibilities.  File: autoconf.info, Node: Signed Overflow Examples, Next: Optimization and Wraparound, Prev: Integer Overflow Basics, Up: Integer Overflow 13.2.2 Examples of Code Assuming Wraparound Overflow ---------------------------------------------------- There has long been a tension between what the C standard requires for signed integer overflow, and what C programs commonly assume. The standard allows aggressive optimizations based on assumptions that overflow never occurs, but many practical C programs rely on overflow wrapping around. These programs do not conform to the standard, but they commonly work in practice because compiler writers are understandably reluctant to implement optimizations that would break many programs, unless perhaps a user specifies aggressive optimization. The C Standard says that if a program has signed integer overflow its behavior is undefined, and the undefined behavior can even precede the overflow. To take an extreme example: if (password == expected_password) allow_superuser_privileges (); else if (counter++ == INT_MAX) abort (); else printf ("%d password mismatches\n", counter); If the `int' variable `counter' equals `INT_MAX', `counter++' must overflow and the behavior is undefined, so the C standard allows the compiler to optimize away the test against `INT_MAX' and the `abort' call. Worse, if an earlier bug in the program lets the compiler deduce that `counter == INT_MAX' or that `counter' previously overflowed, the C standard allows the compiler to optimize away the password test and generate code that allows superuser privileges unconditionally. Despite this requirement by the standard, it has long been common for C code to assume wraparound arithmetic after signed overflow, and all known practical C implementations support some C idioms that assume wraparound signed arithmetic, even if the idioms do not conform strictly to the standard. If your code looks like the following examples it will almost surely work with real-world compilers. Here is an example derived from the 7th Edition Unix implementation of `atoi' (1979-01-10): char *p; int f, n; ... while (*p >= '0' && *p <= '9') n = n * 10 + *p++ - '0'; return (f ? -n : n); Even if the input string is in range, on most modern machines this has signed overflow when computing the most negative integer (the `-n' overflows) or a value near an extreme integer (the first `+' overflows). Here is another example, derived from the 7th Edition implementation of `rand' (1979-01-10). Here the programmer expects both multiplication and addition to wrap on overflow: static long int randx = 1; ... randx = randx * 1103515245 + 12345; return (randx >> 16) & 077777; In the following example, derived from the GNU C Library 2.5 implementation of `mktime' (2006-09-09), the code assumes wraparound arithmetic in `+' to detect signed overflow: time_t t, t1, t2; int sec_requested, sec_adjustment; ... t1 = t + sec_requested; t2 = t1 + sec_adjustment; if (((t1 < t) != (sec_requested < 0)) | ((t2 < t1) != (sec_adjustment < 0))) return -1; If your code looks like these examples, it is probably safe even though it does not strictly conform to the C standard. This might lead one to believe that one can generally assume wraparound on overflow, but that is not always true, as can be seen in the next section.  File: autoconf.info, Node: Optimization and Wraparound, Next: Signed Overflow Advice, Prev: Signed Overflow Examples, Up: Integer Overflow 13.2.3 Optimizations That Break Wraparound Arithmetic ----------------------------------------------------- Compilers sometimes generate code that is incompatible with wraparound integer arithmetic. A simple example is an algebraic simplification: a compiler might translate `(i * 2000) / 1000' to `i * 2' because it assumes that `i * 2000' does not overflow. The translation is not equivalent to the original when overflow occurs: e.g., in the typical case of 32-bit signed two's complement wraparound `int', if `i' has type `int' and value `1073742', the original expression returns -2147483 but the optimized version returns the mathematically correct value 2147484. More subtly, loop induction optimizations often exploit the undefined behavior of signed overflow. Consider the following contrived function `sumc': int sumc (int lo, int hi) { int sum = 0; int i; for (i = lo; i <= hi; i++) sum ^= i * 53; return sum; } To avoid multiplying by 53 each time through the loop, an optimizing compiler might internally transform `sumc' to the equivalent of the following: int transformed_sumc (int lo, int hi) { int sum = 0; int hic = hi * 53; int ic; for (ic = lo * 53; ic <= hic; ic += 53) sum ^= ic; return sum; } This transformation is allowed by the C standard, but it is invalid for wraparound arithmetic when `INT_MAX / 53 < hi', because then the overflow in computing expressions like `hi * 53' can cause the expression `i <= hi' to yield a different value from the transformed expression `ic <= hic'. For this reason, compilers that use loop induction and similar techniques often do not support reliable wraparound arithmetic when a loop induction variable like `ic' is involved. Since loop induction variables are generated by the compiler, and are not visible in the source code, it is not always trivial to say whether the problem affects your code. Hardly any code actually depends on wraparound arithmetic in cases like these, so in practice these loop induction optimizations are almost always useful. However, edge cases in this area can cause problems. For example: int j; for (j = 1; 0 < j; j *= 2) test (j); Here, the loop attempts to iterate through all powers of 2 that `int' can represent, but the C standard allows a compiler to optimize away the comparison and generate an infinite loop, under the argument that behavior is undefined on overflow. As of this writing this optimization is not done by any production version of GCC with `-O2', but it might be performed by other compilers, or by more aggressive GCC optimization options, and the GCC developers have not decided whether it will continue to work with GCC and `-O2'.  File: autoconf.info, Node: Signed Overflow Advice, Next: Signed Integer Division, Prev: Optimization and Wraparound, Up: Integer Overflow 13.2.4 Practical Advice for Signed Overflow Issues -------------------------------------------------- Ideally the safest approach is to avoid signed integer overflow entirely. For example, instead of multiplying two signed integers, you can convert them to unsigned integers, multiply the unsigned values, then test whether the result is in signed range. Rewriting code in this way will be inconvenient, though, particularly if the signed values might be negative. Also, it may hurt performance. Using unsigned arithmetic to check for overflow is particularly painful to do portably and efficiently when dealing with an integer type like `uid_t' whose width and signedness vary from platform to platform. Furthermore, many C applications pervasively assume wraparound behavior and typically it is not easy to find and remove all these assumptions. Hence it is often useful to maintain nonstandard code that assumes wraparound on overflow, instead of rewriting the code. The rest of this section attempts to give practical advice for this situation. If your code wants to detect signed integer overflow in `sum = a + b', it is generally safe to use an expression like `(sum < a) != (b < 0)'. If your code uses a signed loop index, make sure that the index cannot overflow, along with all signed expressions derived from the index. Here is a contrived example of problematic code with two instances of overflow. for (i = INT_MAX - 10; i <= INT_MAX; i++) if (i + 1 < 0) { report_overflow (); break; } Because of the two overflows, a compiler might optimize away or transform the two comparisons in a way that is incompatible with the wraparound assumption. If your code uses an expression like `(i * 2000) / 1000' and you actually want the multiplication to wrap around on overflow, use unsigned arithmetic to do it, e.g., `((int) (i * 2000u)) / 1000'. If your code assumes wraparound behavior and you want to insulate it against any GCC optimizations that would fail to support that behavior, you should use GCC's `-fwrapv' option, which causes signed overflow to wrap around reliably (except for division and remainder, as discussed in the next section). If you need to port to platforms where signed integer overflow does not reliably wrap around (e.g., due to hardware overflow checking, or to highly aggressive optimizations), you should consider debugging with GCC's `-ftrapv' option, which causes signed overflow to raise an exception.  File: autoconf.info, Node: Signed Integer Division, Prev: Signed Overflow Advice, Up: Integer Overflow 13.2.5 Signed Integer Division and Integer Overflow --------------------------------------------------- Overflow in signed integer division is not always harmless: for example, on CPUs of the i386 family, dividing `INT_MIN' by `-1' yields a SIGFPE signal which by default terminates the program. Worse, taking the remainder of these two values typically yields the same signal on these CPUs, even though the C standard requires `INT_MIN % -1' to yield zero because the expression does not overflow.  File: autoconf.info, Node: Preprocessor Arithmetic, Next: Null Pointers, Prev: Integer Overflow, Up: Portable C and C++ 13.3 Preprocessor Arithmetic ============================ In C99, preprocessor arithmetic, used for `#if' expressions, must be evaluated as if all signed values are of type `intmax_t' and all unsigned values of type `uintmax_t'. Many compilers are buggy in this area, though. For example, as of 2007, Sun C mishandles `#if LLONG_MIN < 0' on a platform with 32-bit `long int' and 64-bit `long long int'. Also, some older preprocessors mishandle constants ending in `LL'. To work around these problems, you can compute the value of expressions like `LONG_MAX < LLONG_MAX' at `configure'-time rather than at `#if'-time.  File: autoconf.info, Node: Null Pointers, Next: Buffer Overruns, Prev: Preprocessor Arithmetic, Up: Portable C and C++ 13.4 Properties of Null Pointers ================================ Most modern hosts reliably fail when you attempt to dereference a null pointer. On almost all modern hosts, null pointers use an all-bits-zero internal representation, so you can reliably use `memset' with 0 to set all the pointers in an array to null values. If `p' is a null pointer to an object type, the C expression `p + 0' always evaluates to `p' on modern hosts, even though the standard says that it has undefined behavior.  File: autoconf.info, Node: Buffer Overruns, Next: Volatile Objects, Prev: Null Pointers, Up: Portable C and C++ 13.5 Buffer Overruns and Subscript Errors ========================================= Buffer overruns and subscript errors are the most common dangerous errors in C programs. They result in undefined behavior because storing outside an array typically modifies storage that is used by some other object, and most modern systems lack runtime checks to catch these errors. Programs should not rely on buffer overruns being caught. There is one exception to the usual rule that a portable program cannot address outside an array. In C, it is valid to compute the address just past an object, e.g., `&a[N]' where `a' has `N' elements, so long as you do not dereference the resulting pointer. But it is not valid to compute the address just before an object, e.g., `&a[-1]'; nor is it valid to compute two past the end, e.g., `&a[N+1]'. On most platforms `&a[-1] < &a[0] && &a[N] < &a[N+1]', but this is not reliable in general, and it is usually easy enough to avoid the potential portability problem, e.g., by allocating an extra unused array element at the start or end. Valgrind (http://valgrind.org/) can catch many overruns. GCC users might also consider using the `-fmudflap' option to catch overruns. Buffer overruns are usually caused by off-by-one errors, but there are more subtle ways to get them. Using `int' values to index into an array or compute array sizes causes problems on typical 64-bit hosts where an array index might be 2^31 or larger. Index values of type `size_t' avoid this problem, but cannot be negative. Index values of type `ptrdiff_t' are signed, and are wide enough in practice. If you add or multiply two numbers to calculate an array size, e.g., `malloc (x * sizeof y + z)', havoc ensues if the addition or multiplication overflows. Many implementations of the `alloca' function silently misbehave and can generate buffer overflows if given sizes that are too large. The size limits are implementation dependent, but are at least 4000 bytes on all platforms that we know about. The standard functions `asctime', `asctime_r', `ctime', `ctime_r', and `gets' are prone to buffer overflows, and portable code should not use them unless the inputs are known to be within certain limits. The time-related functions can overflow their buffers if given timestamps out of range (e.g., a year less than -999 or greater than 9999). Time-related buffer overflows cannot happen with recent-enough versions of the GNU C library, but are possible with other implementations. The `gets' function is the worst, since it almost invariably overflows its buffer when presented with an input line larger than the buffer.  File: autoconf.info, Node: Volatile Objects, Next: Floating Point Portability, Prev: Buffer Overruns, Up: Portable C and C++ 13.6 Volatile Objects ===================== The keyword `volatile' is often misunderstood in portable code. Its use inhibits some memory-access optimizations, but programmers often wish that it had a different meaning than it actually does. `volatile' was designed for code that accesses special objects like memory-mapped device registers whose contents spontaneously change. Such code is inherently low-level, and it is difficult to specify portably what `volatile' means in these cases. The C standard says, "What constitutes an access to an object that has volatile-qualified type is implementation-defined," so in theory each implementation is supposed to fill in the gap by documenting what `volatile' means for that implementation. In practice, though, this documentation is usually absent or incomplete. One area of confusion is the distinction between objects defined with volatile types, and volatile lvalues. From the C standard's point of view, an object defined with a volatile type has externally visible behavior. You can think of such objects as having little oscilloscope probes attached to them, so that the user can observe some properties of accesses to them, just as the user can observe data written to output files. However, the standard does not make it clear whether users can observe accesses by volatile lvalues to ordinary objects. For example: /* Declare and access a volatile object. Accesses to X are "visible" to users. */ static int volatile x; x = 1; /* Access two ordinary objects via a volatile lvalue. It's not clear whether accesses to *P are "visible". */ int y; int *z = malloc (sizeof (int)); int volatile *p; p = &y; *p = 1; p = z; *p = 1; Programmers often wish that `volatile' meant "Perform the memory access here and now, without merging several memory accesses, without changing the memory word size, and without reordering." But the C standard does not require this. For objects defined with a volatile type, accesses must be done before the next sequence point; but otherwise merging, reordering, and word-size change is allowed. Worse, it is not clear from the standard whether volatile lvalues provide more guarantees in general than nonvolatile lvalues, if the underlying objects are ordinary. Even when accessing objects defined with a volatile type, the C standard allows only extremely limited signal handlers: the behavior is undefined if a signal handler reads any nonlocal object, or writes to any nonlocal object whose type is not `sig_atomic_t volatile', or calls any standard library function other than `abort', `signal', and (if C99) `_Exit'. Hence C compilers need not worry about a signal handler disturbing ordinary computation, unless the computation accesses a `sig_atomic_t volatile' lvalue that is not a local variable. (There is an obscure exception for accesses via a pointer to a volatile character, since it may point into part of a `sig_atomic_t volatile' object.) Posix adds to the list of library functions callable from a portable signal handler, but otherwise is like the C standard in this area. Some C implementations allow memory-access optimizations within each translation unit, such that actual behavior agrees with the behavior required by the standard only when calling a function in some other translation unit, and a signal handler acts like it was called from a different translation unit. The C standard hints that in these implementations, objects referred to by signal handlers "would require explicit specification of `volatile' storage, as well as other implementation-defined restrictions." But unfortunately even for this special case these other restrictions are often not documented well. *Note When is a Volatile Object Accessed?: (gcc)Volatiles, for some restrictions imposed by GCC. *Note Defining Signal Handlers: (libc)Defining Handlers, for some restrictions imposed by the GNU C library. Restrictions differ on other platforms. If possible, it is best to use a signal handler that fits within the limits imposed by the C and Posix standards. If this is not practical, you can try the following rules of thumb. A signal handler should access only volatile lvalues, preferably lvalues that refer to objects defined with a volatile type, and should not assume that the accessed objects have an internally consistent state if they are larger than a machine word. Furthermore, installers should employ compilers and compiler options that are commonly used for building operating system kernels, because kernels often need more from `volatile' than the C Standard requires, and installers who compile an application in a similar environment can sometimes benefit from the extra constraints imposed by kernels on compilers. Admittedly we are handwaving somewhat here, as there are few guarantees in this area; the rules of thumb may help to fix some bugs but there is a good chance that they will not fix them all. For `volatile', C++ has the same problems that C does. Multithreaded applications have even more problems with `volatile', but they are beyond the scope of this section. The bottom line is that using `volatile' typically hurts performance but should not hurt correctness. In some cases its use does help correctness, but these cases are often so poorly understood that all too often adding `volatile' to a data structure merely alleviates some symptoms of a bug while not fixing the bug in general.  File: autoconf.info, Node: Floating Point Portability, Next: Exiting Portably, Prev: Volatile Objects, Up: Portable C and C++ 13.7 Floating Point Portability =============================== Almost all modern systems use IEEE-754 floating point, and it is safe to assume IEEE-754 in most portable code these days. For more information, please see David Goldberg's classic paper What Every Computer Scientist Should Know About Floating-Point Arithmetic (http://www.validlab.com/goldberg/paper.pdf).  File: autoconf.info, Node: Exiting Portably, Prev: Floating Point Portability, Up: Portable C and C++ 13.8 Exiting Portably ===================== A C or C++ program can exit with status N by returning N from the `main' function. Portable programs are supposed to exit either with status 0 or `EXIT_SUCCESS' to succeed, or with status `EXIT_FAILURE' to fail, but in practice it is portable to fail by exiting with status 1, and test programs that assume Posix can fail by exiting with status values from 1 through 255. Programs on SunOS 2.0 (1985) through 3.5.2 (1988) incorrectly exited with zero status when `main' returned nonzero, but ancient systems like these are no longer of practical concern. A program can also exit with status N by passing N to the `exit' function, and a program can fail by calling the `abort' function. If a program is specialized to just some platforms, it can fail by calling functions specific to those platforms, e.g., `_exit' (Posix) and `_Exit' (C99). However, like other functions, an exit function should be declared, typically by including a header. For example, if a C program calls `exit', it should include `stdlib.h' either directly or via the default includes (*note Default Includes::). A program can fail due to undefined behavior such as dereferencing a null pointer, but this is not recommended as undefined behavior allows an implementation to do whatever it pleases and this includes exiting successfully.  File: autoconf.info, Node: Manual Configuration, Next: Site Configuration, Prev: Portable C and C++, Up: Top 14 Manual Configuration *********************** A few kinds of features can't be guessed automatically by running test programs. For example, the details of the object-file format, or special options that need to be passed to the compiler or linker. You can check for such features using ad-hoc means, such as having `configure' check the output of the `uname' program, or looking for libraries that are unique to particular systems. However, Autoconf provides a uniform method for handling unguessable features. * Menu: * Specifying Target Triplets:: Specifying target triplets * Canonicalizing:: Getting the canonical system type * Using System Type:: What to do with the system type  File: autoconf.info, Node: Specifying Target Triplets, Next: Canonicalizing, Up: Manual Configuration 14.1 Specifying target triplets =============================== Autoconf-generated `configure' scripts can make decisions based on a canonical name for the system type, or "target triplet", which has the form: `CPU-VENDOR-OS', where OS can be `SYSTEM' or `KERNEL-SYSTEM' `configure' can usually guess the canonical name for the type of system it's running on. To do so it runs a script called `config.guess', which infers the name using the `uname' command or symbols predefined by the C preprocessor. Alternately, the user can specify the system type with command line arguments to `configure' (*note System Type::. Doing so is necessary when cross-compiling. In the most complex case of cross-compiling, three system types are involved. The options to specify them are: `--build=BUILD-TYPE' the type of system on which the package is being configured and compiled. It defaults to the result of running `config.guess'. Specifying a BUILD-TYPE that differs from HOST-TYPE enables cross-compilation mode. `--host=HOST-TYPE' the type of system on which the package runs. By default it is the same as the build machine. Specifying a HOST-TYPE that differs from BUILD-TYPE, when BUILD-TYPE was also explicitly specified, enables cross-compilation mode. `--target=TARGET-TYPE' the type of system for which any compiler tools in the package produce code (rarely needed). By default, it is the same as host. If you mean to override the result of `config.guess', use `--build', not `--host', since the latter enables cross-compilation. For historical reasons, whenever you specify `--host', be sure to specify `--build' too; this will be fixed in the future. So, to enter cross-compilation mode, use a command like this ./configure --build=i686-pc-linux-gnu --host=m68k-coff Note that if you do not specify `--host', `configure' fails if it can't run the code generated by the specified compiler. For example, configuring as follows fails: ./configure CC=m68k-coff-gcc When cross-compiling, `configure' will warn about any tools (compilers, linkers, assemblers) whose name is not prefixed with the host type. This is an aid to users performing cross-compilation. Continuing the example above, if a cross-compiler named `cc' is used with a native `pkg-config', then libraries found by `pkg-config' will likely cause subtle build failures; but using the names `m68k-coff-cc' and `m68k-coff-pkg-config' avoids any confusion. Avoiding the warning is as simple as creating the correct symlinks naming the cross tools. `configure' recognizes short aliases for many system types; for example, `decstation' can be used instead of `mips-dec-ultrix4.2'. `configure' runs a script called `config.sub' to canonicalize system type aliases. This section deliberately omits the description of the obsolete interface; see *note Hosts and Cross-Compilation::.  File: autoconf.info, Node: Canonicalizing, Next: Using System Type, Prev: Specifying Target Triplets, Up: Manual Configuration 14.2 Getting the Canonical System Type ====================================== The following macros make the system type available to `configure' scripts. The variables `build_alias', `host_alias', and `target_alias' are always exactly the arguments of `--build', `--host', and `--target'; in particular, they are left empty if the user did not use them, even if the corresponding `AC_CANONICAL' macro was run. Any configure script may use these variables anywhere. These are the variables that should be used when in interaction with the user. If you need to recognize some special environments based on their system type, run the following macros to get canonical system names. These variables are not set before the macro call. If you use these macros, you must distribute `config.guess' and `config.sub' along with your source code. *Note Output::, for information about the `AC_CONFIG_AUX_DIR' macro which you can use to control in which directory `configure' looks for those scripts. -- Macro: AC_CANONICAL_BUILD Compute the canonical build-system type variable, `build', and its three individual parts `build_cpu', `build_vendor', and `build_os'. If `--build' was specified, then `build' is the canonicalization of `build_alias' by `config.sub', otherwise it is determined by the shell script `config.guess'. -- Macro: AC_CANONICAL_HOST Compute the canonical host-system type variable, `host', and its three individual parts `host_cpu', `host_vendor', and `host_os'. If `--host' was specified, then `host' is the canonicalization of `host_alias' by `config.sub', otherwise it defaults to `build'. -- Macro: AC_CANONICAL_TARGET Compute the canonical target-system type variable, `target', and its three individual parts `target_cpu', `target_vendor', and `target_os'. If `--target' was specified, then `target' is the canonicalization of `target_alias' by `config.sub', otherwise it defaults to `host'. Note that there can be artifacts due to the backward compatibility code. *Note Hosts and Cross-Compilation::, for more.  File: autoconf.info, Node: Using System Type, Prev: Canonicalizing, Up: Manual Configuration 14.3 Using the System Type ========================== In `configure.ac' the system type is generally used by one or more `case' statements to select system-specifics. Shell wildcards can be used to match a group of system types. For example, an extra assembler code object file could be chosen, giving access to a CPU cycle counter register. `$(CYCLE_OBJ)' in the following would be used in a makefile to add the object to a program or library. AS_CASE([$host], [alpha*-*-*], [CYCLE_OBJ=rpcc.o], [i?86-*-*], [CYCLE_OBJ=rdtsc.o], [CYCLE_OBJ=""] ) AC_SUBST([CYCLE_OBJ]) `AC_CONFIG_LINKS' (*note Configuration Links::) is another good way to select variant source files, for example optimized code for some CPUs. The configured CPU type doesn't always indicate exact CPU types, so some runtime capability checks may be necessary too. case $host in alpha*-*-*) AC_CONFIG_LINKS([dither.c:alpha/dither.c]) ;; powerpc*-*-*) AC_CONFIG_LINKS([dither.c:powerpc/dither.c]) ;; *-*-*) AC_CONFIG_LINKS([dither.c:generic/dither.c]) ;; esac The host system type can also be used to find cross-compilation tools with `AC_CHECK_TOOL' (*note Generic Programs::). The above examples all show `$host', since this is where the code is going to run. Only rarely is it necessary to test `$build' (which is where the build is being done). Whenever you're tempted to use `$host' it's worth considering whether some sort of probe would be better. New system types come along periodically or previously missing features are added. Well-written probes can adapt themselves to such things, but hard-coded lists of names can't. Here are some guidelines, * Availability of libraries and library functions should always be checked by probing. * Variant behavior of system calls is best identified with runtime tests if possible, but bug workarounds or obscure difficulties might have to be driven from `$host'. * Assembler code is inevitably highly CPU-specific and is best selected according to `$host_cpu'. * Assembler variations like underscore prefix on globals or ELF versus COFF type directives are however best determined by probing, perhaps even examining the compiler output. `$target' is for use by a package creating a compiler or similar. For ordinary packages it's meaningless and should not be used. It indicates what the created compiler should generate code for, if it can cross-compile. `$target' generally selects various hard-coded CPU and system conventions, since usually the compiler or tools under construction themselves determine how the target works.  File: autoconf.info, Node: Site Configuration, Next: Running configure Scripts, Prev: Manual Configuration, Up: Top 15 Site Configuration ********************* `configure' scripts support several kinds of local configuration decisions. There are ways for users to specify where external software packages are, include or exclude optional features, install programs under modified names, and set default values for `configure' options. * Menu: * Help Formatting:: Customizing `configure --help' * External Software:: Working with other optional software * Package Options:: Selecting optional features * Pretty Help Strings:: Formatting help string * Option Checking:: Controlling checking of `configure' options * Site Details:: Configuring site details * Transforming Names:: Changing program names when installing * Site Defaults:: Giving `configure' local defaults  File: autoconf.info, Node: Help Formatting, Next: External Software, Up: Site Configuration 15.1 Controlling Help Output ============================ Users consult `configure --help' to learn of configuration decisions specific to your package. By default, `configure' breaks this output into sections for each type of option; within each section, help strings appear in the order `configure.ac' defines them: Optional Features: ... --enable-bar include bar Optional Packages: ... --with-foo use foo -- Macro: AC_PRESERVE_HELP_ORDER Request an alternate `--help' format, in which options of all types appear together, in the order defined. Call this macro before any `AC_ARG_ENABLE' or `AC_ARG_WITH'. Optional Features and Packages: ... --enable-bar include bar --with-foo use foo  File: autoconf.info, Node: External Software, Next: Package Options, Prev: Help Formatting, Up: Site Configuration 15.2 Working With External Software =================================== Some packages require, or can optionally use, other software packages that are already installed. The user can give `configure' command line options to specify which such external software to use. The options have one of these forms: --with-PACKAGE[=ARG] --without-PACKAGE For example, `--with-gnu-ld' means work with the GNU linker instead of some other linker. `--with-x' means work with The X Window System. The user can give an argument by following the package name with `=' and the argument. Giving an argument of `no' is for packages that are used by default; it says to _not_ use the package. An argument that is neither `yes' nor `no' could include a name or number of a version of the other package, to specify more precisely which other package this program is supposed to work with. If no argument is given, it defaults to `yes'. `--without-PACKAGE' is equivalent to `--with-PACKAGE=no'. Normally `configure' scripts complain about `--with-PACKAGE' options that they do not support. *Note Option Checking::, for details, and for how to override the defaults. For each external software package that may be used, `configure.ac' should call `AC_ARG_WITH' to detect whether the `configure' user asked to use it. Whether each package is used or not by default, and which arguments are valid, is up to you. -- Macro: AC_ARG_WITH (PACKAGE, HELP-STRING, [ACTION-IF-GIVEN], [ACTION-IF-NOT-GIVEN]) If the user gave `configure' the option `--with-PACKAGE' or `--without-PACKAGE', run shell commands ACTION-IF-GIVEN. If neither option was given, run shell commands ACTION-IF-NOT-GIVEN. The name PACKAGE indicates another software package that this program should work with. It should consist only of alphanumeric characters, dashes, plus signs, and dots. The option's argument is available to the shell commands ACTION-IF-GIVEN in the shell variable `withval', which is actually just the value of the shell variable named `with_PACKAGE', with any non-alphanumeric characters in PACKAGE changed into `_'. You may use that variable instead, if you wish. The argument HELP-STRING is a description of the option that looks like this: --with-readline support fancy command line editing HELP-STRING may be more than one line long, if more detail is needed. Just make sure the columns line up in `configure --help'. Avoid tabs in the help string. The easiest way to provide the proper leading whitespace is to format your HELP-STRING with the macro `AS_HELP_STRING' (*note Pretty Help Strings::). The following example shows how to use the `AC_ARG_WITH' macro in a common situation. You want to let the user decide whether to enable support for an external library (e.g., the readline library); if the user specified neither `--with-readline' nor `--without-readline', you want to enable support for readline only if the library is available on the system. AC_ARG_WITH([readline], [AS_HELP_STRING([--with-readline], [support fancy command line editing @<:@default=check@:>@])], [], [with_readline=check]) LIBREADLINE= AS_IF([test "x$with_readline" != xno], [AC_CHECK_LIB([readline], [main], [AC_SUBST([LIBREADLINE], ["-lreadline -lncurses"]) AC_DEFINE([HAVE_LIBREADLINE], [1], [Define if you have libreadline]) ], [if test "x$with_readline" != xcheck; then AC_MSG_FAILURE( [--with-readline was given, but test for readline failed]) fi ], -lncurses)]) The next example shows how to use `AC_ARG_WITH' to give the user the possibility to enable support for the readline library, in case it is still experimental and not well tested, and is therefore disabled by default. AC_ARG_WITH([readline], [AS_HELP_STRING([--with-readline], [enable experimental support for readline])], [], [with_readline=no]) LIBREADLINE= AS_IF([test "x$with_readline" != xno], [AC_CHECK_LIB([readline], [main], [AC_SUBST([LIBREADLINE], ["-lreadline -lncurses"]) AC_DEFINE([HAVE_LIBREADLINE], [1], [Define if you have libreadline]) ], [AC_MSG_FAILURE( [--with-readline was given, but test for readline failed])], [-lncurses])]) The last example shows how to use `AC_ARG_WITH' to give the user the possibility to disable support for the readline library, given that it is an important feature and that it should be enabled by default. AC_ARG_WITH([readline], [AS_HELP_STRING([--without-readline], [disable support for readline])], [], [with_readline=yes]) LIBREADLINE= AS_IF([test "x$with_readline" != xno], [AC_CHECK_LIB([readline], [main], [AC_SUBST([LIBREADLINE], ["-lreadline -lncurses"]) AC_DEFINE([HAVE_LIBREADLINE], [1], [Define if you have libreadline]) ], [AC_MSG_FAILURE( [readline test failed (--without-readline to disable)])], [-lncurses])]) These three examples can be easily adapted to the case where `AC_ARG_ENABLE' should be preferred to `AC_ARG_WITH' (see *note Package Options::).  File: autoconf.info, Node: Package Options, Next: Pretty Help Strings, Prev: External Software, Up: Site Configuration 15.3 Choosing Package Options ============================= If a software package has optional compile-time features, the user can give `configure' command line options to specify whether to compile them. The options have one of these forms: --enable-FEATURE[=ARG] --disable-FEATURE These options allow users to choose which optional features to build and install. `--enable-FEATURE' options should never make a feature behave differently or cause one feature to replace another. They should only cause parts of the program to be built rather than left out. The user can give an argument by following the feature name with `=' and the argument. Giving an argument of `no' requests that the feature _not_ be made available. A feature with an argument looks like `--enable-debug=stabs'. If no argument is given, it defaults to `yes'. `--disable-FEATURE' is equivalent to `--enable-FEATURE=no'. Normally `configure' scripts complain about `--enable-PACKAGE' options that they do not support. *Note Option Checking::, for details, and for how to override the defaults. For each optional feature, `configure.ac' should call `AC_ARG_ENABLE' to detect whether the `configure' user asked to include it. Whether each feature is included or not by default, and which arguments are valid, is up to you. -- Macro: AC_ARG_ENABLE (FEATURE, HELP-STRING, [ACTION-IF-GIVEN], [ACTION-IF-NOT-GIVEN]) If the user gave `configure' the option `--enable-FEATURE' or `--disable-FEATURE', run shell commands ACTION-IF-GIVEN. If neither option was given, run shell commands ACTION-IF-NOT-GIVEN. The name FEATURE indicates an optional user-level facility. It should consist only of alphanumeric characters, dashes, plus signs, and dots. The option's argument is available to the shell commands ACTION-IF-GIVEN in the shell variable `enableval', which is actually just the value of the shell variable named `enable_FEATURE', with any non-alphanumeric characters in FEATURE changed into `_'. You may use that variable instead, if you wish. The HELP-STRING argument is like that of `AC_ARG_WITH' (*note External Software::). You should format your HELP-STRING with the macro `AS_HELP_STRING' (*note Pretty Help Strings::). See the examples suggested with the definition of `AC_ARG_WITH' (*note External Software::) to get an idea of possible applications of `AC_ARG_ENABLE'.  File: autoconf.info, Node: Pretty Help Strings, Next: Option Checking, Prev: Package Options, Up: Site Configuration 15.4 Making Your Help Strings Look Pretty ========================================= Properly formatting the `help strings' which are used in `AC_ARG_WITH' (*note External Software::) and `AC_ARG_ENABLE' (*note Package Options::) can be challenging. Specifically, you want your own `help strings' to line up in the appropriate columns of `configure --help' just like the standard Autoconf `help strings' do. This is the purpose of the `AS_HELP_STRING' macro. -- Macro: AS_HELP_STRING (LEFT-HAND-SIDE, RIGHT-HAND-SIDE [INDENT-COLUMN = `26'], [WRAP-COLUMN = `79']) Expands into a help string that looks pretty when the user executes `configure --help'. It is typically used in `AC_ARG_WITH' (*note External Software::) or `AC_ARG_ENABLE' (*note Package Options::). The following example makes this clearer. AC_ARG_WITH([foo], [AS_HELP_STRING([--with-foo], [use foo (default is no)])], [use_foo=$withval], [use_foo=no]) Then the last few lines of `configure --help' appear like this: --enable and --with options recognized: --with-foo use foo (default is no) Macro expansion is performed on the first argument. However, the second argument of `AS_HELP_STRING' is treated as a whitespace separated list of text to be reformatted, and is not subject to macro expansion. Since it is not expanded, it should not be double quoted. *Note Autoconf Language::, for a more detailed explanation. The `AS_HELP_STRING' macro is particularly helpful when the LEFT-HAND-SIDE and/or RIGHT-HAND-SIDE are composed of macro arguments, as shown in the following example. Be aware that LEFT-HAND-SIDE may not expand to unbalanced quotes, although quadrigraphs can be used. AC_DEFUN([MY_ARG_WITH], [AC_ARG_WITH(m4_translit([[$1]], [_], [-]), [AS_HELP_STRING([--with-m4_translit([$1], [_], [-])], [use $1 (default is $2)])], [use_[]$1=$withval], [use_[]$1=$2])]) MY_ARG_WITH([a_b], [no]) Here, the last few lines of `configure --help' will include: --enable and --with options recognized: --with-a-b use a_b (default is no) The parameters INDENT-COLUMN and WRAP-COLUMN were introduced in Autoconf 2.62. Generally, they should not be specified; they exist for fine-tuning of the wrapping. AS_HELP_STRING([--option], [description of option]) => --option description of option AS_HELP_STRING([--option], [description of option], [15], [30]) => --option description of => option  File: autoconf.info, Node: Option Checking, Next: Site Details, Prev: Pretty Help Strings, Up: Site Configuration 15.5 Controlling Checking of `configure' Options ================================================ The `configure' script checks its command-line options against a list of known options, like `--help' or `--config-cache'. An unknown option ordinarily indicates a mistake by the user and `configure' halts with an error. However, by default unknown `--with-PACKAGE' and `--enable-FEATURE' options elicit only a warning, to support configuring entire source trees. Source trees often contain multiple packages with a top-level `configure' script that uses the `AC_CONFIG_SUBDIRS' macro (*note Subdirectories::). Because the packages generally support different `--with-PACKAGE' and `--enable-FEATURE' options, the GNU Coding Standards say they must accept unrecognized options without halting. Even a warning message is undesirable here, so `AC_CONFIG_SUBDIRS' automatically disables the warnings. This default behavior may be modified in two ways. First, the installer can invoke `configure --disable-option-checking' to disable these warnings, or invoke `configure --enable-option-checking=fatal' options to turn them into fatal errors, respectively. Second, the maintainer can use `AC_DISABLE_OPTION_CHECKING'. -- Macro: AC_DISABLE_OPTION_CHECKING By default, disable warnings related to any unrecognized `--with-PACKAGE' or `--enable-FEATURE' options. This is implied by `AC_CONFIG_SUBDIRS'. The installer can override this behavior by passing `--enable-option-checking' (enable warnings) or `--enable-option-checking=fatal' (enable errors) to `configure'.  File: autoconf.info, Node: Site Details, Next: Transforming Names, Prev: Option Checking, Up: Site Configuration 15.6 Configuring Site Details ============================= Some software packages require complex site-specific information. Some examples are host names to use for certain services, company names, and email addresses to contact. Since some configuration scripts generated by Metaconfig ask for such information interactively, people sometimes wonder how to get that information in Autoconf-generated configuration scripts, which aren't interactive. Such site configuration information should be put in a file that is edited _only by users_, not by programs. The location of the file can either be based on the `prefix' variable, or be a standard location such as the user's home directory. It could even be specified by an environment variable. The programs should examine that file at runtime, rather than at compile time. Runtime configuration is more convenient for users and makes the configuration process simpler than getting the information while configuring. *Note Variables for Installation Directories: (standards)Directory Variables, for more information on where to put data files.  File: autoconf.info, Node: Transforming Names, Next: Site Defaults, Prev: Site Details, Up: Site Configuration 15.7 Transforming Program Names When Installing =============================================== Autoconf supports changing the names of programs when installing them. In order to use these transformations, `configure.ac' must call the macro `AC_ARG_PROGRAM'. -- Macro: AC_ARG_PROGRAM Place in output variable `program_transform_name' a sequence of `sed' commands for changing the names of installed programs. If any of the options described below are given to `configure', program names are transformed accordingly. Otherwise, if `AC_CANONICAL_TARGET' has been called and a `--target' value is given, the target type followed by a dash is used as a prefix. Otherwise, no program name transformation is done. * Menu: * Transformation Options:: `configure' options to transform names * Transformation Examples:: Sample uses of transforming names * Transformation Rules:: Makefile uses of transforming names  File: autoconf.info, Node: Transformation Options, Next: Transformation Examples, Up: Transforming Names 15.7.1 Transformation Options ----------------------------- You can specify name transformations by giving `configure' these command line options: `--program-prefix=PREFIX' prepend PREFIX to the names; `--program-suffix=SUFFIX' append SUFFIX to the names; `--program-transform-name=EXPRESSION' perform `sed' substitution EXPRESSION on the names.  File: autoconf.info, Node: Transformation Examples, Next: Transformation Rules, Prev: Transformation Options, Up: Transforming Names 15.7.2 Transformation Examples ------------------------------ These transformations are useful with programs that can be part of a cross-compilation development environment. For example, a cross-assembler running on a Sun 4 configured with `--target=i960-vxworks' is normally installed as `i960-vxworks-as', rather than `as', which could be confused with a native Sun 4 assembler. You can force a program name to begin with `g', if you don't want GNU programs installed on your system to shadow other programs with the same name. For example, if you configure GNU `diff' with `--program-prefix=g', then when you run `make install' it is installed as `/usr/local/bin/gdiff'. As a more sophisticated example, you could use --program-transform-name='s/^/g/; s/^gg/g/; s/^gless/less/' to prepend `g' to most of the program names in a source tree, excepting those like `gdb' that already have one and those like `less' and `lesskey' that aren't GNU programs. (That is assuming that you have a source tree containing those programs that is set up to use this feature.) One way to install multiple versions of some programs simultaneously is to append a version number to the name of one or both. For example, if you want to keep Autoconf version 1 around for awhile, you can configure Autoconf version 2 using `--program-suffix=2' to install the programs as `/usr/local/bin/autoconf2', `/usr/local/bin/autoheader2', etc. Nevertheless, pay attention that only the binaries are renamed, therefore you'd have problems with the library files which might overlap.  File: autoconf.info, Node: Transformation Rules, Prev: Transformation Examples, Up: Transforming Names 15.7.3 Transformation Rules --------------------------- Here is how to use the variable `program_transform_name' in a `Makefile.in': PROGRAMS = cp ls rm transform = @program_transform_name@ install: for p in $(PROGRAMS); do \ $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p | \ sed '$(transform)'`; \ done uninstall: for p in $(PROGRAMS); do \ rm -f $(DESTDIR)$(bindir)/`echo $$p | sed '$(transform)'`; \ done It is guaranteed that `program_transform_name' is never empty, and that there are no useless separators. Therefore you may safely embed `program_transform_name' within a sed program using `;': transform = @program_transform_name@ transform_exe = s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/ Whether to do the transformations on documentation files (Texinfo or `man') is a tricky question; there seems to be no perfect answer, due to the several reasons for name transforming. Documentation is not usually particular to a specific architecture, and Texinfo files do not conflict with system documentation. But they might conflict with earlier versions of the same files, and `man' pages sometimes do conflict with system documentation. As a compromise, it is probably best to do name transformations on `man' pages but not on Texinfo manuals.  File: autoconf.info, Node: Site Defaults, Prev: Transforming Names, Up: Site Configuration 15.8 Setting Site Defaults ========================== Autoconf-generated `configure' scripts allow your site to provide default values for some configuration values. You do this by creating site- and system-wide initialization files. If the environment variable `CONFIG_SITE' is set, `configure' uses its value as the name of a shell script to read; it is recommended that this be an absolute file name. Otherwise, it reads the shell script `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Thus, settings in machine-specific files override those in machine-independent ones in case of conflict. Site files can be arbitrary shell scripts, but only certain kinds of code are really appropriate to be in them. Because `configure' reads any cache file after it has read any site files, a site file can define a default cache file to be shared between all Autoconf-generated `configure' scripts run on that system (*note Cache Files::). If you set a default cache file in a site file, it is a good idea to also set the output variable `CC' in that site file, because the cache file is only valid for a particular compiler, but many systems have several available. You can examine or override the value set by a command line option to `configure' in a site file; options set shell variables that have the same names as the options, with any dashes turned into underscores. The exceptions are that `--without-' and `--disable-' options are like giving the corresponding `--with-' or `--enable-' option and the value `no'. Thus, `--cache-file=localcache' sets the variable `cache_file' to the value `localcache'; `--enable-warnings=no' or `--disable-warnings' sets the variable `enable_warnings' to the value `no'; `--prefix=/usr' sets the variable `prefix' to the value `/usr'; etc. Site files are also good places to set default values for other output variables, such as `CFLAGS', if you need to give them non-default values: anything you would normally do, repetitively, on the command line. If you use non-default values for PREFIX or EXEC_PREFIX (wherever you locate the site file), you can set them in the site file if you specify it with the `CONFIG_SITE' environment variable. You can set some cache values in the site file itself. Doing this is useful if you are cross-compiling, where it is impossible to check features that require running a test program. You could "prime the cache" by setting those values correctly for that system in `PREFIX/etc/config.site'. To find out the names of the cache variables you need to set, see the documentation of the respective Autoconf macro. If the variables or their semantics are undocumented, you may need to look for shell variables with `_cv_' in their names in the affected `configure' scripts, or in the Autoconf M4 source code for those macros; but in that case, their name or semantics may change in a future Autoconf version. The cache file is careful to not override any variables set in the site files. Similarly, you should not override command-line options in the site files. Your code should check that variables such as `prefix' and `cache_file' have their default values (as set near the top of `configure') before changing them. Here is a sample file `/usr/share/local/gnu/share/config.site'. The command `configure --prefix=/usr/share/local/gnu' would read this file (if `CONFIG_SITE' is not set to a different file). # /usr/share/local/gnu/share/config.site for configure # # Change some defaults. test "$prefix" = NONE && prefix=/usr/share/local/gnu test "$exec_prefix" = NONE && exec_prefix=/usr/local/gnu test "$sharedstatedir" = '${prefix}/com' && sharedstatedir=/var test "$localstatedir" = '${prefix}/var' && localstatedir=/var # Give Autoconf 2.x generated configure scripts a shared default # cache file for feature test results, architecture-specific. if test "$cache_file" = /dev/null; then cache_file="$prefix/var/config.cache" # A cache file is only valid for one C compiler. CC=gcc fi Another use of `config.site' is for priming the directory variables in a manner consistent with the Filesystem Hierarchy Standard (FHS). Once the following file is installed at `/usr/share/config.site', a user can execute simply `./configure --prefix=/usr' to get all the directories chosen in the locations recommended by FHS. # /usr/share/config.site for FHS defaults when installing below /usr, # and the respective settings were not changed on the command line. if test "$prefix" = /usr; then test "$sysconfdir" = '${prefix}/etc' && sysconfdir=/etc test "$sharedstatedir" = '${prefix}/com' && sharedstatedir=/var test "$localstatedir" = '${prefix}/var' && localstatedir=/var fi Likewise, on platforms where 64-bit libraries are built by default, then installed in `/usr/local/lib64' instead of `/usr/local/lib', it is appropriate to install `/usr/local/share/config.site': # /usr/local/share/config.site for platforms that prefer # the directory /usr/local/lib64 over /usr/local/lib. test "$libdir" = '${exec_prefix}/lib' && libdir='${exec_prefix}/lib64'  File: autoconf.info, Node: Running configure Scripts, Next: config.status Invocation, Prev: Site Configuration, Up: Top 16 Running `configure' Scripts ****************************** Below are instructions on how to configure a package that uses a `configure' script, suitable for inclusion as an `INSTALL' file in the package. A plain-text version of `INSTALL' which you may use comes with Autoconf. * Menu: * Basic Installation:: Instructions for typical cases * Compilers and Options:: Selecting compilers and optimization * Multiple Architectures:: Compiling for multiple architectures at once * Installation Names:: Installing in different directories * Optional Features:: Selecting optional features * Particular Systems:: Particular systems * System Type:: Specifying the system type * Sharing Defaults:: Setting site-wide defaults for `configure' * Defining Variables:: Specifying the compiler etc. * configure Invocation:: Changing how `configure' runs  File: autoconf.info, Node: Basic Installation, Next: Compilers and Options, Up: Running configure Scripts 16.1 Basic Installation ======================= Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for instructions specific to this package. More recommendations for GNU packages can be found in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale cache files. If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. Running `configure' might take a while. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and documentation. When installing into a prefix owned by root, it is recommended that the package be configured and built as a regular user, and only the `make install' phase executed with root privileges. 5. Optionally, type `make installcheck' to repeat any self-tests, but this time using the binaries in their final installed location. This target does not install anything. Running this target as a regular user, particularly if the prior `make install' required root privileges, verifies that the installation completed correctly. 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. 7. Often, you can also type `make uninstall' to remove the installed files again. In practice, not all packages have tested that uninstallation works correctly, even though it is required by the GNU Coding Standards. 8. Some packages, particularly those that use Automake, provide `make distcheck', which can by used by developers to test that all other targets like `make install' and `make uninstall' work correctly. This target is generally not run by end users.  File: autoconf.info, Node: Compilers and Options, Next: Multiple Architectures, Prev: Basic Installation, Up: Running configure Scripts 16.2 Compilers and Options ========================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c99 CFLAGS=-g LIBS=-lposix *Note Defining Variables::, for more details.  File: autoconf.info, Node: Multiple Architectures, Next: Installation Names, Prev: Compilers and Options, Up: Running configure Scripts 16.3 Compiling For Multiple Architectures ========================================= You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. This is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. On MacOS X 10.5 and later systems, you can create libraries and executables that work on multiple system types--known as "fat" or "universal" binaries--by specifying multiple `-arch' options to the compiler but only a single `-arch' option to the preprocessor. Like this: ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CPP="gcc -E" CXXCPP="g++ -E" This is not guaranteed to produce working output in all cases, you may have to build one architecture at a time and combine the results using the `lipo' tool if you have problems.  File: autoconf.info, Node: Installation Names, Next: Optional Features, Prev: Multiple Architectures, Up: Running configure Scripts 16.4 Installation Names ======================= By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PREFIX', where PREFIX must be an absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option `--exec-prefix=PREFIX' to `configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. In general, the default for these options is expressed in terms of `${prefix}', so that specifying just `--prefix' will affect all of the other directory specifications that were not explicitly provided. The most portable way to affect installation locations is to pass the correct locations to `configure'; however, many packages provide one or both of the following shortcuts of passing variable assignments to the `make install' command line to change installation locations without having to reconfigure or recompile. The first method involves providing an override variable for each affected directory. For example, `make install prefix=/alternate/directory' will choose an alternate location for all directory configuration variables that were expressed in terms of `${prefix}'. Any directories that were specified during `configure', but not in terms of `${prefix}', must each be overridden at install time for the entire installation to be relocated. The approach of makefile variable overrides for each directory variable is required by the GNU Coding Standards, and ideally causes no recompilation. However, some platforms have known limitations with the semantics of shared libraries that end up requiring recompilation when using this method, particularly noticeable in packages that use GNU Libtool. The second method involves providing the `DESTDIR' variable. For example, `make install DESTDIR=/alternate/directory' will prepend `/alternate/directory' before all installation names. The approach of `DESTDIR' overrides is not required by the GNU Coding Standards, and does not work on platforms that have drive letters. On the other hand, it does better at avoiding recompilation issues, and works well even when some directory options were not specified in terms of `${prefix}' at `configure' time.  File: autoconf.info, Node: Optional Features, Next: Particular Systems, Prev: Installation Names, Up: Running configure Scripts 16.5 Optional Features ====================== If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Some packages offer the ability to configure how verbose the execution of `make' will be. For these packages, running `./configure --enable-silent-rules' sets the default to minimal output, which can be overridden with `make V=1'; while running `./configure --disable-silent-rules' sets the default to verbose, which can be overridden with `make V=0'.  File: autoconf.info, Node: Particular Systems, Next: System Type, Prev: Optional Features, Up: Running configure Scripts 16.6 Particular systems ======================= On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. HP-UX `make' updates targets which have the same time stamps as their prerequisites, which makes it generally unusable when shipped generated files such as `configure' are involved. Use GNU `make' instead. On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended to try ./configure CC="cc" and if that doesn't work, try ./configure CC="cc -nodtk" On Solaris, don't put `/usr/ucb' early in your `PATH'. This directory contains several dysfunctional programs; working variants of these programs are available in `/usr/bin'. So, if you need `/usr/ucb' in your `PATH', put it _after_ `/usr/bin'. On Haiku, software installed for all users goes in `/boot/common', not `/usr/local'. It is recommended to use the following options: ./configure --prefix=/boot/common  File: autoconf.info, Node: System Type, Next: Sharing Defaults, Prev: Particular Systems, Up: Running configure Scripts 16.7 Specifying the System Type =============================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'.  File: autoconf.info, Node: Sharing Defaults, Next: Defining Variables, Prev: System Type, Up: Running configure Scripts 16.8 Sharing Defaults ===================== If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script.  File: autoconf.info, Node: Defining Variables, Next: configure Invocation, Prev: Sharing Defaults, Up: Running configure Scripts 16.9 Defining Variables ======================= Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is overridden in the site shell script). Unfortunately, this technique does not work for `CONFIG_SHELL' due to an Autoconf limitation. Until the limitation is lifted, you can use this workaround: CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash  File: autoconf.info, Node: configure Invocation, Prev: Defining Variables, Up: Running configure Scripts 16.10 `configure' Invocation ============================ `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of all of the options to `configure', and exit. `--help=short' `--help=recursive' Print a summary of the options unique to this package's `configure', and exit. The `short' variant lists options used only in the top level, while the `recursive' variant lists options also present in any nested packages. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--prefix=DIR' Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. `--no-create' `-n' Run the configure checks, but stop before creating any output files. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details.  File: autoconf.info, Node: config.status Invocation, Next: Obsolete Constructs, Prev: Running configure Scripts, Up: Top 17 config.status Invocation *************************** The `configure' script creates a file named `config.status', which actually configures, "instantiates", the template files. It also records the configuration options that were specified when the package was last configured in case reconfiguring is needed. Synopsis: ./config.status [OPTION]... [TAG]... It configures each TAG; if none are specified, all the templates are instantiated. A TAG refers to a file or other tag associated with a configuration action, as specified by an `AC_CONFIG_ITEMS' macro (*note Configuration Actions::). The files must be specified without their dependencies, as in ./config.status foobar not ./config.status foobar:foo.in:bar.in The supported options are: `--help' `-h' Print a summary of the command line options, the list of the template files, and exit. `--version' `-V' Print the version number of Autoconf and the configuration settings, and exit. `--config' Print the configuration settings in reusable way, quoted for the shell, and exit. For example, for a debugging build that otherwise reuses the configuration from a different build directory BUILD-DIR of a package in SRC-DIR, you could use the following: args=`BUILD-DIR/config.status --config` eval SRC-DIR/configure "$args" CFLAGS=-g --srcdir=SRC-DIR Note that it may be necessary to override a `--srcdir' setting that was saved in the configuration, if the arguments are used in a different build directory. `--silent' `--quiet' `-q' Do not print progress messages. `--debug' `-d' Don't remove the temporary files. `--file=FILE[:TEMPLATE]' Require that FILE be instantiated as if `AC_CONFIG_FILES(FILE:TEMPLATE)' was used. Both FILE and TEMPLATE may be `-' in which case the standard output and/or standard input, respectively, is used. If a TEMPLATE file name is relative, it is first looked for in the build tree, and then in the source tree. *Note Configuration Actions::, for more details. This option and the following ones provide one way for separately distributed packages to share the values computed by `configure'. Doing so can be useful if some of the packages need a superset of the features that one of them, perhaps a common library, does. These options allow a `config.status' file to create files other than the ones that its `configure.ac' specifies, so it can be used for a different package, or for extracting a subset of values. For example, echo '@CC@' | ./config.status --file=- provides the value of `@CC@' on standard output. `--header=FILE[:TEMPLATE]' Same as `--file' above, but with `AC_CONFIG_HEADERS'. `--recheck' Ask `config.status' to update itself and exit (no instantiation). This option is useful if you change `configure', so that the results of some tests might be different from the previous run. The `--recheck' option reruns `configure' with the same arguments you used before, plus the `--no-create' option, which prevents `configure' from running `config.status' and creating `Makefile' and other files, and the `--no-recursion' option, which prevents `configure' from running other `configure' scripts in subdirectories. (This is so other Make rules can run `config.status' when it changes; *note Automatic Remaking::, for an example). `config.status' checks several optional environment variables that can alter its behavior: -- Variable: CONFIG_SHELL The shell with which to run `configure'. It must be Bourne-compatible, and the absolute name of the shell should be passed. The default is a shell that supports `LINENO' if available, and `/bin/sh' otherwise. -- Variable: CONFIG_STATUS The file name to use for the shell script that records the configuration. The default is `./config.status'. This variable is useful when one package uses parts of another and the `configure' scripts shouldn't be merged because they are maintained separately. You can use `./config.status' in your makefiles. For example, in the dependencies given above (*note Automatic Remaking::), `config.status' is run twice when `configure.ac' has changed. If that bothers you, you can make each run only regenerate the files for that rule: config.h: stamp-h stamp-h: config.h.in config.status ./config.status config.h echo > stamp-h Makefile: Makefile.in config.status ./config.status Makefile The calling convention of `config.status' has changed; see *note Obsolete config.status Use::, for details.  File: autoconf.info, Node: Obsolete Constructs, Next: Using Autotest, Prev: config.status Invocation, Up: Top 18 Obsolete Constructs ********************** Autoconf changes, and throughout the years some constructs have been obsoleted. Most of the changes involve the macros, but in some cases the tools themselves, or even some concepts, are now considered obsolete. You may completely skip this chapter if you are new to Autoconf. Its intention is mainly to help maintainers updating their packages by understanding how to move to more modern constructs. * Menu: * Obsolete config.status Use:: Obsolete convention for `config.status' * acconfig Header:: Additional entries in `config.h.in' * autoupdate Invocation:: Automatic update of `configure.ac' * Obsolete Macros:: Backward compatibility macros * Autoconf 1:: Tips for upgrading your files * Autoconf 2.13:: Some fresher tips  File: autoconf.info, Node: Obsolete config.status Use, Next: acconfig Header, Up: Obsolete Constructs 18.1 Obsolete `config.status' Invocation ======================================== `config.status' now supports arguments to specify the files to instantiate; see *note config.status Invocation::, for more details. Before, environment variables had to be used. -- Variable: CONFIG_COMMANDS The tags of the commands to execute. The default is the arguments given to `AC_OUTPUT' and `AC_CONFIG_COMMANDS' in `configure.ac'. -- Variable: CONFIG_FILES The files in which to perform `@VARIABLE@' substitutions. The default is the arguments given to `AC_OUTPUT' and `AC_CONFIG_FILES' in `configure.ac'. -- Variable: CONFIG_HEADERS The files in which to substitute C `#define' statements. The default is the arguments given to `AC_CONFIG_HEADERS'; if that macro was not called, `config.status' ignores this variable. -- Variable: CONFIG_LINKS The symbolic links to establish. The default is the arguments given to `AC_CONFIG_LINKS'; if that macro was not called, `config.status' ignores this variable. In *note config.status Invocation::, using this old interface, the example would be: config.h: stamp-h stamp-h: config.h.in config.status CONFIG_COMMANDS= CONFIG_LINKS= CONFIG_FILES= \ CONFIG_HEADERS=config.h ./config.status echo > stamp-h Makefile: Makefile.in config.status CONFIG_COMMANDS= CONFIG_LINKS= CONFIG_HEADERS= \ CONFIG_FILES=Makefile ./config.status (If `configure.ac' does not call `AC_CONFIG_HEADERS', there is no need to set `CONFIG_HEADERS' in the `make' rules. Equally for `CONFIG_COMMANDS', etc.)  File: autoconf.info, Node: acconfig Header, Next: autoupdate Invocation, Prev: Obsolete config.status Use, Up: Obsolete Constructs 18.2 `acconfig.h' ================= In order to produce `config.h.in', `autoheader' needs to build or to find templates for each symbol. Modern releases of Autoconf use `AH_VERBATIM' and `AH_TEMPLATE' (*note Autoheader Macros::), but in older releases a file, `acconfig.h', contained the list of needed templates. `autoheader' copied comments and `#define' and `#undef' statements from `acconfig.h' in the current directory, if present. This file used to be mandatory if you `AC_DEFINE' any additional symbols. Modern releases of Autoconf also provide `AH_TOP' and `AH_BOTTOM' if you need to prepend/append some information to `config.h.in'. Ancient versions of Autoconf had a similar feature: if `./acconfig.h' contains the string `@TOP@', `autoheader' copies the lines before the line containing `@TOP@' into the top of the file that it generates. Similarly, if `./acconfig.h' contains the string `@BOTTOM@', `autoheader' copies the lines after that line to the end of the file it generates. Either or both of those strings may be omitted. An even older alternate way to produce the same effect in ancient versions of Autoconf is to create the files `FILE.top' (typically `config.h.top') and/or `FILE.bot' in the current directory. If they exist, `autoheader' copies them to the beginning and end, respectively, of its output. In former versions of Autoconf, the files used in preparing a software package for distribution were: configure.ac --. .------> autoconf* -----> configure +---+ [aclocal.m4] --+ `---. [acsite.m4] ---' | +--> [autoheader*] -> [config.h.in] [acconfig.h] ----. | +-----' [config.h.top] --+ [config.h.bot] --' Using only the `AH_' macros, `configure.ac' should be self-contained, and should not depend upon `acconfig.h' etc.  File: autoconf.info, Node: autoupdate Invocation, Next: Obsolete Macros, Prev: acconfig Header, Up: Obsolete Constructs 18.3 Using `autoupdate' to Modernize `configure.ac' =================================================== The `autoupdate' program updates a `configure.ac' file that calls Autoconf macros by their old names to use the current macro names. In version 2 of Autoconf, most of the macros were renamed to use a more uniform and descriptive naming scheme. *Note Macro Names::, for a description of the new scheme. Although the old names still work (*note Obsolete Macros::, for a list of the old macros and the corresponding new names), you can make your `configure.ac' files more readable and make it easier to use the current Autoconf documentation if you update them to use the new macro names. If given no arguments, `autoupdate' updates `configure.ac', backing up the original version with the suffix `~' (or the value of the environment variable `SIMPLE_BACKUP_SUFFIX', if that is set). If you give `autoupdate' an argument, it reads that file instead of `configure.ac' and writes the updated file to the standard output. `autoupdate' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' `-v' Report processing steps. `--debug' `-d' Don't remove the temporary files. `--force' `-f' Force the update even if the file has not changed. Disregard the cache. `--include=DIR' `-I DIR' Also look for input files in DIR. Multiple invocations accumulate. Directories are browsed from last to first. `--prepend-include=DIR' `-B DIR' Prepend directory DIR to the search path. This is used to include the language-specific files before any third-party macros.  File: autoconf.info, Node: Obsolete Macros, Next: Autoconf 1, Prev: autoupdate Invocation, Up: Obsolete Constructs 18.4 Obsolete Macros ==================== Several macros are obsoleted in Autoconf, for various reasons (typically they failed to quote properly, couldn't be extended for more recent issues, etc.). They are still supported, but deprecated: their use should be avoided. During the jump from Autoconf version 1 to version 2, most of the macros were renamed to use a more uniform and descriptive naming scheme, but their signature did not change. *Note Macro Names::, for a description of the new naming scheme. Below, if there is just the mapping from old names to new names for these macros, the reader is invited to refer to the definition of the new macro for the signature and the description. -- Macro: AC_AIX This macro is a platform-specific subset of `AC_USE_SYSTEM_EXTENSIONS' (*note AC_USE_SYSTEM_EXTENSIONS::). -- Macro: AC_ALLOCA Replaced by `AC_FUNC_ALLOCA' (*note AC_FUNC_ALLOCA::). -- Macro: AC_ARG_ARRAY Removed because of limited usefulness. -- Macro: AC_C_CROSS This macro is obsolete; it does nothing. -- Macro: AC_C_LONG_DOUBLE If the C compiler supports a working `long double' type with more range or precision than the `double' type, define `HAVE_LONG_DOUBLE'. You should use `AC_TYPE_LONG_DOUBLE' or `AC_TYPE_LONG_DOUBLE_WIDER' instead. *Note Particular Types::. -- Macro: AC_CANONICAL_SYSTEM Determine the system type and set output variables to the names of the canonical system types. *Note Canonicalizing::, for details about the variables this macro sets. The user is encouraged to use either `AC_CANONICAL_BUILD', or `AC_CANONICAL_HOST', or `AC_CANONICAL_TARGET', depending on the needs. Using `AC_CANONICAL_TARGET' is enough to run the two other macros (*note Canonicalizing::). -- Macro: AC_CHAR_UNSIGNED Replaced by `AC_C_CHAR_UNSIGNED' (*note AC_C_CHAR_UNSIGNED::). -- Macro: AC_CHECK_TYPE (TYPE, DEFAULT) Autoconf, up to 2.13, used to provide this version of `AC_CHECK_TYPE', deprecated because of its flaws. First, although it is a member of the `CHECK' clan, it does more than just checking. Secondly, missing types are defined using `#define', not `typedef', and this can lead to problems in the case of pointer types. This use of `AC_CHECK_TYPE' is obsolete and discouraged; see *note Generic Types::, for the description of the current macro. If the type TYPE is not defined, define it to be the C (or C++) builtin type DEFAULT, e.g., `short int' or `unsigned int'. This macro is equivalent to: AC_CHECK_TYPE([TYPE], [], [AC_DEFINE_UNQUOTED([TYPE], [DEFAULT], [Define to `DEFAULT' if does not define.])]) In order to keep backward compatibility, the two versions of `AC_CHECK_TYPE' are implemented, selected using these heuristics: 1. If there are three or four arguments, the modern version is used. 2. If the second argument appears to be a C or C++ type, then the obsolete version is used. This happens if the argument is a C or C++ _builtin_ type or a C identifier ending in `_t', optionally followed by one of `[(* ' and then by a string of zero or more characters taken from the set `[]()* _a-zA-Z0-9'. 3. If the second argument is spelled with the alphabet of valid C and C++ types, the user is warned and the modern version is used. 4. Otherwise, the modern version is used. You are encouraged either to use a valid builtin type, or to use the equivalent modern code (see above), or better yet, to use `AC_CHECK_TYPES' together with #ifndef HAVE_LOFF_T typedef loff_t off_t; #endif -- Macro: AC_CHECKING (FEATURE-DESCRIPTION) Same as AC_MSG_NOTICE([checking FEATURE-DESCRIPTION...] *Note AC_MSG_NOTICE::. -- Macro: AC_COMPILE_CHECK (ECHO-TEXT, INCLUDES, FUNCTION-BODY, ACTION-IF-TRUE, [ACTION-IF-FALSE]) This is an obsolete version of `AC_TRY_COMPILE' itself replaced by `AC_COMPILE_IFELSE' (*note Running the Compiler::), with the addition that it prints `checking for ECHO-TEXT' to the standard output first, if ECHO-TEXT is non-empty. Use `AC_MSG_CHECKING' and `AC_MSG_RESULT' instead to print messages (*note Printing Messages::). -- Macro: AC_CONST Replaced by `AC_C_CONST' (*note AC_C_CONST::). -- Macro: AC_CROSS_CHECK Same as `AC_C_CROSS', which is obsolete too, and does nothing `:-)'. -- Macro: AC_CYGWIN Check for the Cygwin environment in which case the shell variable `CYGWIN' is set to `yes'. Don't use this macro, the dignified means to check the nature of the host is using `AC_CANONICAL_HOST' (*note Canonicalizing::). As a matter of fact this macro is defined as: AC_REQUIRE([AC_CANONICAL_HOST])[]dnl case $host_os in *cygwin* ) CYGWIN=yes;; * ) CYGWIN=no;; esac Beware that the variable `CYGWIN' has a special meaning when running Cygwin, and should not be changed. That's yet another reason not to use this macro. -- Macro: AC_DECL_SYS_SIGLIST Same as: AC_CHECK_DECLS([sys_siglist], [], [], [#include /* NetBSD declares sys_siglist in unistd.h. */ #ifdef HAVE_UNISTD_H # include #endif ]) *Note AC_CHECK_DECLS::. -- Macro: AC_DECL_YYTEXT Does nothing, now integrated in `AC_PROG_LEX' (*note AC_PROG_LEX::). -- Macro: AC_DIR_HEADER Like calling `AC_FUNC_CLOSEDIR_VOID' (*note AC_FUNC_CLOSEDIR_VOID::) and `AC_HEADER_DIRENT' (*note AC_HEADER_DIRENT::), but defines a different set of C preprocessor macros to indicate which header file is found: Header Old Symbol New Symbol `dirent.h' `DIRENT' `HAVE_DIRENT_H' `sys/ndir.h' `SYSNDIR' `HAVE_SYS_NDIR_H' `sys/dir.h' `SYSDIR' `HAVE_SYS_DIR_H' `ndir.h' `NDIR' `HAVE_NDIR_H' -- Macro: AC_DYNIX_SEQ If on DYNIX/ptx, add `-lseq' to output variable `LIBS'. This macro used to be defined as AC_CHECK_LIB([seq], [getmntent], [LIBS="-lseq $LIBS"]) now it is just `AC_FUNC_GETMNTENT' (*note AC_FUNC_GETMNTENT::). -- Macro: AC_EXEEXT Defined the output variable `EXEEXT' based on the output of the compiler, which is now done automatically. Typically set to empty string if Posix and `.exe' if a DOS variant. -- Macro: AC_EMXOS2 Similar to `AC_CYGWIN' but checks for the EMX environment on OS/2 and sets `EMXOS2'. Don't use this macro, the dignified means to check the nature of the host is using `AC_CANONICAL_HOST' (*note Canonicalizing::). -- Macro: AC_ENABLE (FEATURE, ACTION-IF-GIVEN, [ACTION-IF-NOT-GIVEN]) This is an obsolete version of `AC_ARG_ENABLE' that does not support providing a help string (*note AC_ARG_ENABLE::). -- Macro: AC_ERROR Replaced by `AC_MSG_ERROR' (*note AC_MSG_ERROR::). -- Macro: AC_FIND_X Replaced by `AC_PATH_X' (*note AC_PATH_X::). -- Macro: AC_FIND_XTRA Replaced by `AC_PATH_XTRA' (*note AC_PATH_XTRA::). -- Macro: AC_FOREACH Replaced by `m4_foreach_w' (*note m4_foreach_w::). -- Macro: AC_FUNC_CHECK Replaced by `AC_CHECK_FUNC' (*note AC_CHECK_FUNC::). -- Macro: AC_FUNC_SETVBUF_REVERSED Do nothing. Formerly, this macro checked whether `setvbuf' takes the buffering type as its second argument and the buffer pointer as the third, instead of the other way around, and defined `SETVBUF_REVERSED'. However, the last systems to have the problem were those based on SVR2, which became obsolete in 1987, and the macro is no longer needed. -- Macro: AC_FUNC_WAIT3 If `wait3' is found and fills in the contents of its third argument (a `struct rusage *'), which HP-UX does not do, define `HAVE_WAIT3'. These days portable programs should use `waitpid', not `wait3', as `wait3' has been removed from Posix. -- Macro: AC_GCC_TRADITIONAL Replaced by `AC_PROG_GCC_TRADITIONAL' (*note AC_PROG_GCC_TRADITIONAL::). -- Macro: AC_GETGROUPS_T Replaced by `AC_TYPE_GETGROUPS' (*note AC_TYPE_GETGROUPS::). -- Macro: AC_GETLOADAVG Replaced by `AC_FUNC_GETLOADAVG' (*note AC_FUNC_GETLOADAVG::). -- Macro: AC_GNU_SOURCE This macro is a platform-specific subset of `AC_USE_SYSTEM_EXTENSIONS' (*note AC_USE_SYSTEM_EXTENSIONS::). -- Macro: AC_HAVE_FUNCS Replaced by `AC_CHECK_FUNCS' (*note AC_CHECK_FUNCS::). -- Macro: AC_HAVE_HEADERS Replaced by `AC_CHECK_HEADERS' (*note AC_CHECK_HEADERS::). -- Macro: AC_HAVE_LIBRARY (LIBRARY, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [OTHER-LIBRARIES]) This macro is equivalent to calling `AC_CHECK_LIB' with a FUNCTION argument of `main'. In addition, LIBRARY can be written as any of `foo', `-lfoo', or `libfoo.a'. In all of those cases, the compiler is passed `-lfoo'. However, LIBRARY cannot be a shell variable; it must be a literal name. *Note AC_CHECK_LIB::. -- Macro: AC_HAVE_POUNDBANG Replaced by `AC_SYS_INTERPRETER' (*note AC_SYS_INTERPRETER::). -- Macro: AC_HEADER_CHECK Replaced by `AC_CHECK_HEADER' (*note AC_CHECK_HEADER::). -- Macro: AC_HEADER_EGREP Replaced by `AC_EGREP_HEADER' (*note AC_EGREP_HEADER::). -- Macro: AC_HELP_STRING Replaced by `AS_HELP_STRING' (*note AS_HELP_STRING::). -- Macro: AC_INIT (UNIQUE-FILE-IN-SOURCE-DIR) Formerly `AC_INIT' used to have a single argument, and was equivalent to: AC_INIT AC_CONFIG_SRCDIR(UNIQUE-FILE-IN-SOURCE-DIR) See *note AC_INIT:: and *note AC_CONFIG_SRCDIR::. -- Macro: AC_INLINE Replaced by `AC_C_INLINE' (*note AC_C_INLINE::). -- Macro: AC_INT_16_BITS If the C type `int' is 16 bits wide, define `INT_16_BITS'. Use `AC_CHECK_SIZEOF(int)' instead (*note AC_CHECK_SIZEOF::). -- Macro: AC_IRIX_SUN If on IRIX (Silicon Graphics Unix), add `-lsun' to output `LIBS'. If you were using it to get `getmntent', use `AC_FUNC_GETMNTENT' instead. If you used it for the NIS versions of the password and group functions, use `AC_CHECK_LIB(sun, getpwnam)'. Up to Autoconf 2.13, it used to be AC_CHECK_LIB([sun], [getmntent], [LIBS="-lsun $LIBS"]) now it is defined as AC_FUNC_GETMNTENT AC_CHECK_LIB([sun], [getpwnam]) See *note AC_FUNC_GETMNTENT:: and *note AC_CHECK_LIB::. -- Macro: AC_ISC_POSIX This macro adds `-lcposix' to output variable `LIBS' if necessary for Posix facilities. Sun dropped support for the obsolete INTERACTIVE Systems Corporation Unix on 2006-07-23. New programs need not use this macro. It is implemented as `AC_SEARCH_LIBS([strerror], [cposix])' (*note AC_SEARCH_LIBS::). -- Macro: AC_LANG_C Same as `AC_LANG([C])' (*note AC_LANG::). -- Macro: AC_LANG_CPLUSPLUS Same as `AC_LANG([C++])' (*note AC_LANG::). -- Macro: AC_LANG_FORTRAN77 Same as `AC_LANG([Fortran 77])' (*note AC_LANG::). -- Macro: AC_LANG_RESTORE Select the LANGUAGE that is saved on the top of the stack, as set by `AC_LANG_SAVE', remove it from the stack, and call `AC_LANG(LANGUAGE)'. *Note Language Choice::, for the preferred way to change languages. -- Macro: AC_LANG_SAVE Remember the current language (as set by `AC_LANG') on a stack. The current language does not change. `AC_LANG_PUSH' is preferred (*note AC_LANG_PUSH::). -- Macro: AC_LINK_FILES (SOURCE..., DEST...) This is an obsolete version of `AC_CONFIG_LINKS' (*note AC_CONFIG_LINKS::. An updated version of: AC_LINK_FILES(config/$machine.h config/$obj_format.h, host.h object.h) is: AC_CONFIG_LINKS([host.h:config/$machine.h object.h:config/$obj_format.h]) -- Macro: AC_LN_S Replaced by `AC_PROG_LN_S' (*note AC_PROG_LN_S::). -- Macro: AC_LONG_64_BITS Define `LONG_64_BITS' if the C type `long int' is 64 bits wide. Use the generic macro `AC_CHECK_SIZEOF([long int])' instead (*note AC_CHECK_SIZEOF::). -- Macro: AC_LONG_DOUBLE If the C compiler supports a working `long double' type with more range or precision than the `double' type, define `HAVE_LONG_DOUBLE'. You should use `AC_TYPE_LONG_DOUBLE' or `AC_TYPE_LONG_DOUBLE_WIDER' instead. *Note Particular Types::. -- Macro: AC_LONG_FILE_NAMES Replaced by AC_SYS_LONG_FILE_NAMES *Note AC_SYS_LONG_FILE_NAMES::. -- Macro: AC_MAJOR_HEADER Replaced by `AC_HEADER_MAJOR' (*note AC_HEADER_MAJOR::). -- Macro: AC_MEMORY_H Used to define `NEED_MEMORY_H' if the `mem' functions were defined in `memory.h'. Today it is equivalent to `AC_CHECK_HEADERS([memory.h])' (*note AC_CHECK_HEADERS::). Adjust your code to depend upon `HAVE_MEMORY_H', not `NEED_MEMORY_H'; see *note Standard Symbols::. -- Macro: AC_MINGW32 Similar to `AC_CYGWIN' but checks for the MinGW compiler environment and sets `MINGW32'. Don't use this macro, the dignified means to check the nature of the host is using `AC_CANONICAL_HOST' (*note Canonicalizing::). -- Macro: AC_MINIX This macro is a platform-specific subset of `AC_USE_SYSTEM_EXTENSIONS' (*note AC_USE_SYSTEM_EXTENSIONS::). -- Macro: AC_MINUS_C_MINUS_O Replaced by `AC_PROG_CC_C_O' (*note AC_PROG_CC_C_O::). -- Macro: AC_MMAP Replaced by `AC_FUNC_MMAP' (*note AC_FUNC_MMAP::). -- Macro: AC_MODE_T Replaced by `AC_TYPE_MODE_T' (*note AC_TYPE_MODE_T::). -- Macro: AC_OBJEXT Defined the output variable `OBJEXT' based on the output of the compiler, after .c files have been excluded. Typically set to `o' if Posix, `obj' if a DOS variant. Now the compiler checking macros handle this automatically. -- Macro: AC_OBSOLETE (THIS-MACRO-NAME, [SUGGESTION]) Make M4 print a message to the standard error output warning that THIS-MACRO-NAME is obsolete, and giving the file and line number where it was called. THIS-MACRO-NAME should be the name of the macro that is calling `AC_OBSOLETE'. If SUGGESTION is given, it is printed at the end of the warning message; for example, it can be a suggestion for what to use instead of THIS-MACRO-NAME. For instance AC_OBSOLETE([$0], [; use AC_CHECK_HEADERS(unistd.h) instead])dnl You are encouraged to use `AU_DEFUN' instead, since it gives better services to the user (*note AU_DEFUN::). -- Macro: AC_OFF_T Replaced by `AC_TYPE_OFF_T' (*note AC_TYPE_OFF_T::). -- Macro: AC_OUTPUT ([FILE]..., [EXTRA-CMDS], [INIT-CMDS]) The use of `AC_OUTPUT' with arguments is deprecated. This obsoleted interface is equivalent to: AC_CONFIG_FILES(FILE...) AC_CONFIG_COMMANDS([default], EXTRA-CMDS, INIT-CMDS) AC_OUTPUT See *note AC_CONFIG_FILES::, *note AC_CONFIG_COMMANDS::, and *note AC_OUTPUT::. -- Macro: AC_OUTPUT_COMMANDS (EXTRA-CMDS, [INIT-CMDS]) Specify additional shell commands to run at the end of `config.status', and shell commands to initialize any variables from `configure'. This macro may be called multiple times. It is obsolete, replaced by `AC_CONFIG_COMMANDS' (*note AC_CONFIG_COMMANDS::). Here is an unrealistic example: fubar=27 AC_OUTPUT_COMMANDS([echo this is extra $fubar, and so on.], [fubar=$fubar]) AC_OUTPUT_COMMANDS([echo this is another, extra, bit], [echo init bit]) Aside from the fact that `AC_CONFIG_COMMANDS' requires an additional key, an important difference is that `AC_OUTPUT_COMMANDS' is quoting its arguments twice, unlike `AC_CONFIG_COMMANDS'. This means that `AC_CONFIG_COMMANDS' can safely be given macro calls as arguments: AC_CONFIG_COMMANDS(foo, [my_FOO()]) Conversely, where one level of quoting was enough for literal strings with `AC_OUTPUT_COMMANDS', you need two with `AC_CONFIG_COMMANDS'. The following lines are equivalent: AC_OUTPUT_COMMANDS([echo "Square brackets: []"]) AC_CONFIG_COMMANDS([default], [[echo "Square brackets: []"]]) -- Macro: AC_PID_T Replaced by `AC_TYPE_PID_T' (*note AC_TYPE_PID_T::). -- Macro: AC_PREFIX Replaced by `AC_PREFIX_PROGRAM' (*note AC_PREFIX_PROGRAM::). -- Macro: AC_PROGRAMS_CHECK Replaced by `AC_CHECK_PROGS' (*note AC_CHECK_PROGS::). -- Macro: AC_PROGRAMS_PATH Replaced by `AC_PATH_PROGS' (*note AC_PATH_PROGS::). -- Macro: AC_PROGRAM_CHECK Replaced by `AC_CHECK_PROG' (*note AC_CHECK_PROG::). -- Macro: AC_PROGRAM_EGREP Replaced by `AC_EGREP_CPP' (*note AC_EGREP_CPP::). -- Macro: AC_PROGRAM_PATH Replaced by `AC_PATH_PROG' (*note AC_PATH_PROG::). -- Macro: AC_REMOTE_TAPE Removed because of limited usefulness. -- Macro: AC_RESTARTABLE_SYSCALLS This macro was renamed `AC_SYS_RESTARTABLE_SYSCALLS'. However, these days portable programs should use `sigaction' with `SA_RESTART' if they want restartable system calls. They should not rely on `HAVE_RESTARTABLE_SYSCALLS', since nowadays whether a system call is restartable is a dynamic issue, not a configuration-time issue. -- Macro: AC_RETSIGTYPE Replaced by `AC_TYPE_SIGNAL' (*note AC_TYPE_SIGNAL::), which itself is obsolete when assuming C89 or better. -- Macro: AC_RSH Removed because of limited usefulness. -- Macro: AC_SCO_INTL If on SCO Unix, add `-lintl' to output variable `LIBS'. This macro used to do this: AC_CHECK_LIB([intl], [strftime], [LIBS="-lintl $LIBS"]) Now it just calls `AC_FUNC_STRFTIME' instead (*note AC_FUNC_STRFTIME::). -- Macro: AC_SETVBUF_REVERSED Replaced by AC_FUNC_SETVBUF_REVERSED *Note AC_FUNC_SETVBUF_REVERSED::. -- Macro: AC_SET_MAKE Replaced by `AC_PROG_MAKE_SET' (*note AC_PROG_MAKE_SET::). -- Macro: AC_SIZEOF_TYPE Replaced by `AC_CHECK_SIZEOF' (*note AC_CHECK_SIZEOF::). -- Macro: AC_SIZE_T Replaced by `AC_TYPE_SIZE_T' (*note AC_TYPE_SIZE_T::). -- Macro: AC_STAT_MACROS_BROKEN Replaced by `AC_HEADER_STAT' (*note AC_HEADER_STAT::). -- Macro: AC_STDC_HEADERS Replaced by `AC_HEADER_STDC' (*note AC_HEADER_STDC::). -- Macro: AC_STRCOLL Replaced by `AC_FUNC_STRCOLL' (*note AC_FUNC_STRCOLL::). -- Macro: AC_STRUCT_ST_BLKSIZE If `struct stat' contains an `st_blksize' member, define `HAVE_STRUCT_STAT_ST_BLKSIZE'. The former name, `HAVE_ST_BLKSIZE' is to be avoided, as its support will cease in the future. This macro is obsoleted, and should be replaced by AC_CHECK_MEMBERS([struct stat.st_blksize]) *Note AC_CHECK_MEMBERS::. -- Macro: AC_STRUCT_ST_RDEV If `struct stat' contains an `st_rdev' member, define `HAVE_STRUCT_STAT_ST_RDEV'. The former name for this macro, `HAVE_ST_RDEV', is to be avoided as it will cease to be supported in the future. Actually, even the new macro is obsolete and should be replaced by: AC_CHECK_MEMBERS([struct stat.st_rdev]) *Note AC_CHECK_MEMBERS::. -- Macro: AC_ST_BLKSIZE Replaced by `AC_CHECK_MEMBERS' (*note AC_CHECK_MEMBERS::). -- Macro: AC_ST_BLOCKS Replaced by `AC_STRUCT_ST_BLOCKS' (*note AC_STRUCT_ST_BLOCKS::). -- Macro: AC_ST_RDEV Replaced by `AC_CHECK_MEMBERS' (*note AC_CHECK_MEMBERS::). -- Macro: AC_SYS_RESTARTABLE_SYSCALLS If the system automatically restarts a system call that is interrupted by a signal, define `HAVE_RESTARTABLE_SYSCALLS'. This macro does not check whether system calls are restarted in general--it checks whether a signal handler installed with `signal' (but not `sigaction') causes system calls to be restarted. It does not check whether system calls can be restarted when interrupted by signals that have no handler. These days portable programs should use `sigaction' with `SA_RESTART' if they want restartable system calls. They should not rely on `HAVE_RESTARTABLE_SYSCALLS', since nowadays whether a system call is restartable is a dynamic issue, not a configuration-time issue. -- Macro: AC_SYS_SIGLIST_DECLARED This macro was renamed `AC_DECL_SYS_SIGLIST'. However, even that name is obsolete, as the same functionality is now achieved via `AC_CHECK_DECLS' (*note AC_CHECK_DECLS::). -- Macro: AC_TEST_CPP This macro was renamed `AC_TRY_CPP', which in turn was replaced by `AC_PREPROC_IFELSE' (*note AC_PREPROC_IFELSE::). -- Macro: AC_TEST_PROGRAM This macro was renamed `AC_TRY_RUN', which in turn was replaced by `AC_RUN_IFELSE' (*note AC_RUN_IFELSE::). -- Macro: AC_TIMEZONE Replaced by `AC_STRUCT_TIMEZONE' (*note AC_STRUCT_TIMEZONE::). -- Macro: AC_TIME_WITH_SYS_TIME Replaced by `AC_HEADER_TIME' (*note AC_HEADER_TIME::). -- Macro: AC_TRY_COMPILE (INCLUDES, FUNCTION-BODY, [ACTION-IF-TRUE], [ACTION-IF-FALSE]) Same as: AC_COMPILE_IFELSE( [AC_LANG_PROGRAM([[INCLUDES]], [[FUNCTION-BODY]])], [ACTION-IF-TRUE], [ACTION-IF-FALSE]) *Note Running the Compiler::. This macro double quotes both INCLUDES and FUNCTION-BODY. For C and C++, INCLUDES is any `#include' statements needed by the code in FUNCTION-BODY (INCLUDES is ignored if the currently selected language is Fortran or Fortran 77). The compiler and compilation flags are determined by the current language (*note Language Choice::). -- Macro: AC_TRY_CPP (INPUT, [ACTION-IF-TRUE], [ACTION-IF-FALSE]) Same as: AC_PREPROC_IFELSE( [AC_LANG_SOURCE([[INPUT]])], [ACTION-IF-TRUE], [ACTION-IF-FALSE]) *Note Running the Preprocessor::. This macro double quotes the INPUT. -- Macro: AC_TRY_LINK (INCLUDES, FUNCTION-BODY, [ACTION-IF-TRUE], [ACTION-IF-FALSE]) Same as: AC_LINK_IFELSE( [AC_LANG_PROGRAM([[INCLUDES]], [[FUNCTION-BODY]])], [ACTION-IF-TRUE], [ACTION-IF-FALSE]) *Note Running the Compiler::. This macro double quotes both INCLUDES and FUNCTION-BODY. Depending on the current language (*note Language Choice::), create a test program to see whether a function whose body consists of FUNCTION-BODY can be compiled and linked. If the file compiles and links successfully, run shell commands ACTION-IF-FOUND, otherwise run ACTION-IF-NOT-FOUND. This macro double quotes both INCLUDES and FUNCTION-BODY. For C and C++, INCLUDES is any `#include' statements needed by the code in FUNCTION-BODY (INCLUDES is ignored if the currently selected language is Fortran or Fortran 77). The compiler and compilation flags are determined by the current language (*note Language Choice::), and in addition `LDFLAGS' and `LIBS' are used for linking. -- Macro: AC_TRY_LINK_FUNC (FUNCTION, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) This macro is equivalent to AC_LINK_IFELSE([AC_LANG_CALL([], [FUNCTION])], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) *Note AC_LINK_IFELSE::. -- Macro: AC_TRY_RUN (PROGRAM, [ACTION-IF-TRUE], [ACTION-IF-FALSE], [ACTION-IF-CROSS-COMPILING = `AC_MSG_FAILURE']) Same as: AC_RUN_IFELSE( [AC_LANG_SOURCE([[PROGRAM]])], [ACTION-IF-TRUE], [ACTION-IF-FALSE], [ACTION-IF-CROSS-COMPILING]) *Note Runtime::. -- Macro: AC_TYPE_SIGNAL If `signal.h' declares `signal' as returning a pointer to a function returning `void', define `RETSIGTYPE' to be `void'; otherwise, define it to be `int'. These days, it is portable to assume C89, and that signal handlers return `void', without needing to use this macro or `RETSIGTYPE'. When targeting older K&R C, it is possible to define signal handlers as returning type `RETSIGTYPE', and omit a return statement: RETSIGTYPE hup_handler () { ... } -- Macro: AC_UID_T Replaced by `AC_TYPE_UID_T' (*note AC_TYPE_UID_T::). -- Macro: AC_UNISTD_H Same as `AC_CHECK_HEADERS([unistd.h])' (*note AC_CHECK_HEADERS::). -- Macro: AC_USG Define `USG' if the BSD string functions are defined in `strings.h'. You should no longer depend upon `USG', but on `HAVE_STRING_H'; see *note Standard Symbols::. -- Macro: AC_UTIME_NULL Replaced by `AC_FUNC_UTIME_NULL' (*note AC_FUNC_UTIME_NULL::). -- Macro: AC_VALIDATE_CACHED_SYSTEM_TUPLE ([CMD]) If the cache file is inconsistent with the current host, target and build system types, it used to execute CMD or print a default error message. This is now handled by default. -- Macro: AC_VERBOSE (RESULT-DESCRIPTION) Replaced by `AC_MSG_RESULT' (*note AC_MSG_RESULT::). -- Macro: AC_VFORK Replaced by `AC_FUNC_FORK' (*note AC_FUNC_FORK::). -- Macro: AC_VPRINTF Replaced by `AC_FUNC_VPRINTF' (*note AC_FUNC_VPRINTF::). -- Macro: AC_WAIT3 This macro was renamed `AC_FUNC_WAIT3'. However, these days portable programs should use `waitpid', not `wait3', as `wait3' has been removed from Posix. -- Macro: AC_WARN Replaced by `AC_MSG_WARN' (*note AC_MSG_WARN::). -- Macro: AC_WITH (PACKAGE, ACTION-IF-GIVEN, [ACTION-IF-NOT-GIVEN]) This is an obsolete version of `AC_ARG_WITH' that does not support providing a help string (*note AC_ARG_WITH::). -- Macro: AC_WORDS_BIGENDIAN Replaced by `AC_C_BIGENDIAN' (*note AC_C_BIGENDIAN::). -- Macro: AC_XENIX_DIR This macro used to add `-lx' to output variable `LIBS' if on Xenix. Also, if `dirent.h' is being checked for, added `-ldir' to `LIBS'. Now it is merely an alias of `AC_HEADER_DIRENT' instead, plus some code to detect whether running XENIX on which you should not depend: AC_MSG_CHECKING([for Xenix]) AC_EGREP_CPP([yes], [#if defined M_XENIX && !defined M_UNIX yes #endif], [AC_MSG_RESULT([yes]); XENIX=yes], [AC_MSG_RESULT([no]); XENIX=]) Don't use this macro, the dignified means to check the nature of the host is using `AC_CANONICAL_HOST' (*note Canonicalizing::). -- Macro: AC_YYTEXT_POINTER This macro was renamed `AC_DECL_YYTEXT', which in turn was integrated into `AC_PROG_LEX' (*note AC_PROG_LEX::).  File: autoconf.info, Node: Autoconf 1, Next: Autoconf 2.13, Prev: Obsolete Macros, Up: Obsolete Constructs 18.5 Upgrading From Version 1 ============================= Autoconf version 2 is mostly backward compatible with version 1. However, it introduces better ways to do some things, and doesn't support some of the ugly things in version 1. So, depending on how sophisticated your `configure.ac' files are, you might have to do some manual work in order to upgrade to version 2. This chapter points out some problems to watch for when upgrading. Also, perhaps your `configure' scripts could benefit from some of the new features in version 2; the changes are summarized in the file `NEWS' in the Autoconf distribution. * Menu: * Changed File Names:: Files you might rename * Changed Makefiles:: New things to put in `Makefile.in' * Changed Macros:: Macro calls you might replace * Changed Results:: Changes in how to check test results * Changed Macro Writing:: Better ways to write your own macros  File: autoconf.info, Node: Changed File Names, Next: Changed Makefiles, Up: Autoconf 1 18.5.1 Changed File Names ------------------------- If you have an `aclocal.m4' installed with Autoconf (as opposed to in a particular package's source directory), you must rename it to `acsite.m4'. *Note autoconf Invocation::. If you distribute `install.sh' with your package, rename it to `install-sh' so `make' builtin rules don't inadvertently create a file called `install' from it. `AC_PROG_INSTALL' looks for the script under both names, but it is best to use the new name. If you were using `config.h.top', `config.h.bot', or `acconfig.h', you still can, but you have less clutter if you use the `AH_' macros. *Note Autoheader Macros::.  File: autoconf.info, Node: Changed Makefiles, Next: Changed Macros, Prev: Changed File Names, Up: Autoconf 1 18.5.2 Changed Makefiles ------------------------ Add `@CFLAGS@', `@CPPFLAGS@', and `@LDFLAGS@' in your `Makefile.in' files, so they can take advantage of the values of those variables in the environment when `configure' is run. Doing this isn't necessary, but it's a convenience for users. Also add `@configure_input@' in a comment to each input file for `AC_OUTPUT', so that the output files contain a comment saying they were produced by `configure'. Automatically selecting the right comment syntax for all the kinds of files that people call `AC_OUTPUT' on became too much work. Add `config.log' and `config.cache' to the list of files you remove in `distclean' targets. If you have the following in `Makefile.in': prefix = /usr/local exec_prefix = $(prefix) you must change it to: prefix = @prefix@ exec_prefix = @exec_prefix@ The old behavior of replacing those variables without `@' characters around them has been removed.  File: autoconf.info, Node: Changed Macros, Next: Changed Results, Prev: Changed Makefiles, Up: Autoconf 1 18.5.3 Changed Macros --------------------- Many of the macros were renamed in Autoconf version 2. You can still use the old names, but the new ones are clearer, and it's easier to find the documentation for them. *Note Obsolete Macros::, for a table showing the new names for the old macros. Use the `autoupdate' program to convert your `configure.ac' to using the new macro names. *Note autoupdate Invocation::. Some macros have been superseded by similar ones that do the job better, but are not call-compatible. If you get warnings about calling obsolete macros while running `autoconf', you may safely ignore them, but your `configure' script generally works better if you follow the advice that is printed about what to replace the obsolete macros with. In particular, the mechanism for reporting the results of tests has changed. If you were using `echo' or `AC_VERBOSE' (perhaps via `AC_COMPILE_CHECK'), your `configure' script's output looks better if you switch to `AC_MSG_CHECKING' and `AC_MSG_RESULT'. *Note Printing Messages::. Those macros work best in conjunction with cache variables. *Note Caching Results::.  File: autoconf.info, Node: Changed Results, Next: Changed Macro Writing, Prev: Changed Macros, Up: Autoconf 1 18.5.4 Changed Results ---------------------- If you were checking the results of previous tests by examining the shell variable `DEFS', you need to switch to checking the values of the cache variables for those tests. `DEFS' no longer exists while `configure' is running; it is only created when generating output files. This difference from version 1 is because properly quoting the contents of that variable turned out to be too cumbersome and inefficient to do every time `AC_DEFINE' is called. *Note Cache Variable Names::. For example, here is a `configure.ac' fragment written for Autoconf version 1: AC_HAVE_FUNCS(syslog) case "$DEFS" in *-DHAVE_SYSLOG*) ;; *) # syslog is not in the default libraries. See if it's in some other. saved_LIBS="$LIBS" for lib in bsd socket inet; do AC_CHECKING(for syslog in -l$lib) LIBS="-l$lib $saved_LIBS" AC_HAVE_FUNCS(syslog) case "$DEFS" in *-DHAVE_SYSLOG*) break ;; *) ;; esac LIBS="$saved_LIBS" done ;; esac Here is a way to write it for version 2: AC_CHECK_FUNCS([syslog]) if test "x$ac_cv_func_syslog" = xno; then # syslog is not in the default libraries. See if it's in some other. for lib in bsd socket inet; do AC_CHECK_LIB([$lib], [syslog], [AC_DEFINE([HAVE_SYSLOG]) LIBS="-l$lib $LIBS"; break]) done fi If you were working around bugs in `AC_DEFINE_UNQUOTED' by adding backslashes before quotes, you need to remove them. It now works predictably, and does not treat quotes (except back quotes) specially. *Note Setting Output Variables::. All of the Boolean shell variables set by Autoconf macros now use `yes' for the true value. Most of them use `no' for false, though for backward compatibility some use the empty string instead. If you were relying on a shell variable being set to something like 1 or `t' for true, you need to change your tests.  File: autoconf.info, Node: Changed Macro Writing, Prev: Changed Results, Up: Autoconf 1 18.5.5 Changed Macro Writing ---------------------------- When defining your own macros, you should now use `AC_DEFUN' instead of `define'. `AC_DEFUN' automatically calls `AC_PROVIDE' and ensures that macros called via `AC_REQUIRE' do not interrupt other macros, to prevent nested `checking...' messages on the screen. There's no actual harm in continuing to use the older way, but it's less convenient and attractive. *Note Macro Definitions::. You probably looked at the macros that came with Autoconf as a guide for how to do things. It would be a good idea to take a look at the new versions of them, as the style is somewhat improved and they take advantage of some new features. If you were doing tricky things with undocumented Autoconf internals (macros, variables, diversions), check whether you need to change anything to account for changes that have been made. Perhaps you can even use an officially supported technique in version 2 instead of kludging. Or perhaps not. To speed up your locally written feature tests, add caching to them. See whether any of your tests are of general enough usefulness to encapsulate them into macros that you can share.  File: autoconf.info, Node: Autoconf 2.13, Prev: Autoconf 1, Up: Obsolete Constructs 18.6 Upgrading From Version 2.13 ================================ The introduction of the previous section (*note Autoconf 1::) perfectly suits this section... Autoconf version 2.50 is mostly backward compatible with version 2.13. However, it introduces better ways to do some things, and doesn't support some of the ugly things in version 2.13. So, depending on how sophisticated your `configure.ac' files are, you might have to do some manual work in order to upgrade to version 2.50. This chapter points out some problems to watch for when upgrading. Also, perhaps your `configure' scripts could benefit from some of the new features in version 2.50; the changes are summarized in the file `NEWS' in the Autoconf distribution. * Menu: * Changed Quotation:: Broken code which used to work * New Macros:: Interaction with foreign macros * Hosts and Cross-Compilation:: Bugward compatibility kludges * AC_LIBOBJ vs LIBOBJS:: LIBOBJS is a forbidden token * AC_ACT_IFELSE vs AC_TRY_ACT:: A more generic scheme for testing sources  File: autoconf.info, Node: Changed Quotation, Next: New Macros, Up: Autoconf 2.13 18.6.1 Changed Quotation ------------------------ The most important changes are invisible to you: the implementation of most macros have completely changed. This allowed more factorization of the code, better error messages, a higher uniformity of the user's interface etc. Unfortunately, as a side effect, some construct which used to (miraculously) work might break starting with Autoconf 2.50. The most common culprit is bad quotation. For instance, in the following example, the message is not properly quoted: AC_INIT AC_CHECK_HEADERS(foo.h, , AC_MSG_ERROR(cannot find foo.h, bailing out)) AC_OUTPUT Autoconf 2.13 simply ignores it: $ autoconf-2.13; ./configure --silent creating cache ./config.cache configure: error: cannot find foo.h $ while Autoconf 2.50 produces a broken `configure': $ autoconf-2.50; ./configure --silent configure: error: cannot find foo.h ./configure: exit: bad non-numeric arg `bailing' ./configure: exit: bad non-numeric arg `bailing' $ The message needs to be quoted, and the `AC_MSG_ERROR' invocation too! AC_INIT([Example], [1.0], [bug-example@example.org]) AC_CHECK_HEADERS([foo.h], [], [AC_MSG_ERROR([cannot find foo.h, bailing out])]) AC_OUTPUT Many many (and many more) Autoconf macros were lacking proper quotation, including no less than... `AC_DEFUN' itself! $ cat configure.in AC_DEFUN([AC_PROG_INSTALL], [# My own much better version ]) AC_INIT AC_PROG_INSTALL AC_OUTPUT $ autoconf-2.13 autoconf: Undefined macros: ***BUG in Autoconf--please report*** AC_FD_MSG ***BUG in Autoconf--please report*** AC_EPI configure.in:1:AC_DEFUN([AC_PROG_INSTALL], configure.in:5:AC_PROG_INSTALL $ autoconf-2.50 $  File: autoconf.info, Node: New Macros, Next: Hosts and Cross-Compilation, Prev: Changed Quotation, Up: Autoconf 2.13 18.6.2 New Macros ----------------- While Autoconf was relatively dormant in the late 1990s, Automake provided Autoconf-like macros for a while. Starting with Autoconf 2.50 in 2001, Autoconf provided versions of these macros, integrated in the `AC_' namespace, instead of `AM_'. But in order to ease the upgrading via `autoupdate', bindings to such `AM_' macros are provided. Unfortunately older versions of Automake (e.g., Automake 1.4) did not quote the names of these macros. Therefore, when `m4' finds something like `AC_DEFUN(AM_TYPE_PTRDIFF_T, ...)' in `aclocal.m4', `AM_TYPE_PTRDIFF_T' is expanded, replaced with its Autoconf definition. Fortunately Autoconf catches pre-`AC_INIT' expansions, and complains, in its own words: $ cat configure.ac AC_INIT([Example], [1.0], [bug-example@example.org]) AM_TYPE_PTRDIFF_T $ aclocal-1.4 $ autoconf aclocal.m4:17: error: m4_defn: undefined macro: _m4_divert_diversion aclocal.m4:17: the top level autom4te: m4 failed with exit status: 1 $ Modern versions of Automake no longer define most of these macros, and properly quote the names of the remaining macros. If you must use an old Automake, do not depend upon macros from Automake as it is simply not its job to provide macros (but the one it requires itself): $ cat configure.ac AC_INIT([Example], [1.0], [bug-example@example.org]) AM_TYPE_PTRDIFF_T $ rm aclocal.m4 $ autoupdate autoupdate: `configure.ac' is updated $ cat configure.ac AC_INIT([Example], [1.0], [bug-example@example.org]) AC_CHECK_TYPES([ptrdiff_t]) $ aclocal-1.4 $ autoconf $  File: autoconf.info, Node: Hosts and Cross-Compilation, Next: AC_LIBOBJ vs LIBOBJS, Prev: New Macros, Up: Autoconf 2.13 18.6.3 Hosts and Cross-Compilation ---------------------------------- Based on the experience of compiler writers, and after long public debates, many aspects of the cross-compilation chain have changed: - the relationship between the build, host, and target architecture types, - the command line interface for specifying them to `configure', - the variables defined in `configure', - the enabling of cross-compilation mode. The relationship between build, host, and target have been cleaned up: the chain of default is now simply: target defaults to host, host to build, and build to the result of `config.guess'. Nevertheless, in order to ease the transition from 2.13 to 2.50, the following transition scheme is implemented. _Do not rely on it_, as it will be completely disabled in a couple of releases (we cannot keep it, as it proves to cause more problems than it cures). They all default to the result of running `config.guess', unless you specify either `--build' or `--host'. In this case, the default becomes the system type you specified. If you specify both, and they're different, `configure' enters cross compilation mode, so it doesn't run any tests that require execution. Hint: if you mean to override the result of `config.guess', prefer `--build' over `--host'. For backward compatibility, `configure' accepts a system type as an option by itself. Such an option overrides the defaults for build, host, and target system types. The following configure statement configures a cross toolchain that runs on NetBSD/alpha but generates code for GNU Hurd/sparc, which is also the build platform. ./configure --host=alpha-netbsd sparc-gnu In Autoconf 2.13 and before, the variables `build', `host', and `target' had a different semantics before and after the invocation of `AC_CANONICAL_BUILD' etc. Now, the argument of `--build' is strictly copied into `build_alias', and is left empty otherwise. After the `AC_CANONICAL_BUILD', `build' is set to the canonicalized build type. To ease the transition, before, its contents is the same as that of `build_alias'. Do _not_ rely on this broken feature. For consistency with the backward compatibility scheme exposed above, when `--host' is specified but `--build' isn't, the build system is assumed to be the same as `--host', and `build_alias' is set to that value. Eventually, this historically incorrect behavior will go away. The former scheme to enable cross-compilation proved to cause more harm than good, in particular, it used to be triggered too easily, leaving regular end users puzzled in front of cryptic error messages. `configure' could even enter cross-compilation mode only because the compiler was not functional. This is mainly because `configure' used to try to detect cross-compilation, instead of waiting for an explicit flag from the user. Now, `configure' enters cross-compilation mode if and only if `--host' is passed. That's the short documentation. To ease the transition between 2.13 and its successors, a more complicated scheme is implemented. _Do not rely on the following_, as it will be removed in the near future. If you specify `--host', but not `--build', when `configure' performs the first compiler test it tries to run an executable produced by the compiler. If the execution fails, it enters cross-compilation mode. This is fragile. Moreover, by the time the compiler test is performed, it may be too late to modify the build-system type: other tests may have already been performed. Therefore, whenever you specify `--host', be sure to specify `--build' too. ./configure --build=i686-pc-linux-gnu --host=m68k-coff enters cross-compilation mode. The former interface, which consisted in setting the compiler to a cross-compiler without informing `configure' is obsolete. For instance, `configure' fails if it can't run the code generated by the specified compiler if you configure as follows: ./configure CC=m68k-coff-gcc  File: autoconf.info, Node: AC_LIBOBJ vs LIBOBJS, Next: AC_ACT_IFELSE vs AC_TRY_ACT, Prev: Hosts and Cross-Compilation, Up: Autoconf 2.13 18.6.4 `AC_LIBOBJ' vs. `LIBOBJS' -------------------------------- Up to Autoconf 2.13, the replacement of functions was triggered via the variable `LIBOBJS'. Since Autoconf 2.50, the macro `AC_LIBOBJ' should be used instead (*note Generic Functions::). Starting at Autoconf 2.53, the use of `LIBOBJS' is an error. This change is mandated by the unification of the GNU Build System components. In particular, the various fragile techniques used to parse a `configure.ac' are all replaced with the use of traces. As a consequence, any action must be traceable, which obsoletes critical variable assignments. Fortunately, `LIBOBJS' was the only problem, and it can even be handled gracefully (read, "without your having to change something"). There were two typical uses of `LIBOBJS': asking for a replacement function, and adjusting `LIBOBJS' for Automake and/or Libtool. As for function replacement, the fix is immediate: use `AC_LIBOBJ'. For instance: LIBOBJS="$LIBOBJS fnmatch.o" LIBOBJS="$LIBOBJS malloc.$ac_objext" should be replaced with: AC_LIBOBJ([fnmatch]) AC_LIBOBJ([malloc]) When used with Automake 1.10 or newer, a suitable value for `LIBOBJDIR' is set so that the `LIBOBJS' and `LTLIBOBJS' can be referenced from any `Makefile.am'. Even without Automake, arranging for `LIBOBJDIR' to be set correctly enables referencing `LIBOBJS' and `LTLIBOBJS' in another directory. The `LIBOBJDIR' feature is experimental.  File: autoconf.info, Node: AC_ACT_IFELSE vs AC_TRY_ACT, Prev: AC_LIBOBJ vs LIBOBJS, Up: Autoconf 2.13 18.6.5 `AC_ACT_IFELSE' vs. `AC_TRY_ACT' --------------------------------------- Since Autoconf 2.50, internal codes uses `AC_PREPROC_IFELSE', `AC_COMPILE_IFELSE', `AC_LINK_IFELSE', and `AC_RUN_IFELSE' on one hand and `AC_LANG_SOURCE', and `AC_LANG_PROGRAM' on the other hand instead of the deprecated `AC_TRY_CPP', `AC_TRY_COMPILE', `AC_TRY_LINK', and `AC_TRY_RUN'. The motivations where: - a more consistent interface: `AC_TRY_COMPILE' etc. were double quoting their arguments; - the combinatoric explosion is solved by decomposing on the one hand the generation of sources, and on the other hand executing the program; - this scheme helps supporting more languages than plain C and C++. In addition to the change of syntax, the philosophy has changed too: while emphasis was put on speed at the expense of accuracy, today's Autoconf promotes accuracy of the testing framework at, ahem..., the expense of speed. As a perfect example of what is _not_ to be done, here is how to find out whether a header file contains a particular declaration, such as a typedef, a structure, a structure member, or a function. Use `AC_EGREP_HEADER' instead of running `grep' directly on the header file; on some systems the symbol might be defined in another header file that the file you are checking includes. As a (bad) example, here is how you should not check for C preprocessor symbols, either defined by header files or predefined by the C preprocessor: using `AC_EGREP_CPP': AC_EGREP_CPP(yes, [#ifdef _AIX yes #endif ], is_aix=yes, is_aix=no) The above example, properly written would (i) use `AC_LANG_PROGRAM', and (ii) run the compiler: AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [[#ifndef _AIX error: This isn't AIX! #endif ]])], [is_aix=yes], [is_aix=no])  File: autoconf.info, Node: Using Autotest, Next: FAQ, Prev: Obsolete Constructs, Up: Top 19 Generating Test Suites with Autotest *************************************** *N.B.: This section describes a feature which is still stabilizing. Although we believe that Autotest is useful as-is, this documentation describes an interface which might change in the future: do not depend upon Autotest without subscribing to the Autoconf mailing lists.* It is paradoxical that portable projects depend on nonportable tools to run their test suite. Autoconf by itself is the paragon of this problem: although it aims at perfectly portability, up to 2.13 its test suite was using DejaGNU, a rich and complex testing framework, but which is far from being standard on Posix systems. Worse yet, it was likely to be missing on the most fragile platforms, the very platforms that are most likely to torture Autoconf and exhibit deficiencies. To circumvent this problem, many package maintainers have developed their own testing framework, based on simple shell scripts whose sole outputs are exit status values describing whether the test succeeded. Most of these tests share common patterns, and this can result in lots of duplicated code and tedious maintenance. Following exactly the same reasoning that yielded to the inception of Autoconf, Autotest provides a test suite generation framework, based on M4 macros building a portable shell script. The suite itself is equipped with automatic logging and tracing facilities which greatly diminish the interaction with bug reporters, and simple timing reports. Autoconf itself has been using Autotest for years, and we do attest that it has considerably improved the strength of the test suite and the quality of bug reports. Other projects are known to use some generation of Autotest, such as Bison, Free Recode, Free Wdiff, GNU Tar, each of them with different needs, and this usage has validated Autotest as a general testing framework. Nonetheless, compared to DejaGNU, Autotest is inadequate for interactive tool testing, which is probably its main limitation. * Menu: * Using an Autotest Test Suite:: Autotest and the user * Writing Testsuites:: Autotest macros * testsuite Invocation:: Running `testsuite' scripts * Making testsuite Scripts:: Using autom4te to create `testsuite'  File: autoconf.info, Node: Using an Autotest Test Suite, Next: Writing Testsuites, Up: Using Autotest 19.1 Using an Autotest Test Suite ================================= * Menu: * testsuite Scripts:: The concepts of Autotest * Autotest Logs:: Their contents  File: autoconf.info, Node: testsuite Scripts, Next: Autotest Logs, Up: Using an Autotest Test Suite 19.1.1 `testsuite' Scripts -------------------------- Generating testing or validation suites using Autotest is rather easy. The whole validation suite is held in a file to be processed through `autom4te', itself using GNU M4 under the hood, to produce a stand-alone Bourne shell script which then gets distributed. Neither `autom4te' nor GNU M4 are needed at the installer's end. Each test of the validation suite should be part of some test group. A "test group" is a sequence of interwoven tests that ought to be executed together, usually because one test in the group creates data files that a later test in the same group needs to read. Complex test groups make later debugging more tedious. It is much better to keep only a few tests per test group. Ideally there is only one test per test group. For all but the simplest packages, some file such as `testsuite.at' does not fully hold all test sources, as these are often easier to maintain in separate files. Each of these separate files holds a single test group, or a sequence of test groups all addressing some common functionality in the package. In such cases, `testsuite.at' merely initializes the validation suite, and sometimes does elementary health checking, before listing include statements for all other test files. The special file `package.m4', containing the identification of the package, is automatically included if found. A convenient alternative consists in moving all the global issues (local Autotest macros, elementary health checking, and `AT_INIT' invocation) into the file `local.at', and making `testsuite.at' be a simple list of `m4_include's of sub test suites. In such case, generating the whole test suite or pieces of it is only a matter of choosing the `autom4te' command line arguments. The validation scripts that Autotest produces are by convention called `testsuite'. When run, `testsuite' executes each test group in turn, producing only one summary line per test to say if that particular test succeeded or failed. At end of all tests, summarizing counters get printed. One debugging directory is left for each test group which failed, if any: such directories are named `testsuite.dir/NN', where NN is the sequence number of the test group, and they include: * a debugging script named `run' which reruns the test in "debug mode" (*note testsuite Invocation::). The automatic generation of debugging scripts has the purpose of easing the chase for bugs. * all the files created with `AT_DATA' * all the Erlang source code files created with `AT_CHECK_EUNIT' * a log of the run, named `testsuite.log' In the ideal situation, none of the tests fail, and consequently no debugging directory is left behind for validation. It often happens in practice that individual tests in the validation suite need to get information coming out of the configuration process. Some of this information, common for all validation suites, is provided through the file `atconfig', automatically created by `AC_CONFIG_TESTDIR'. For configuration information which your testing environment specifically needs, you might prepare an optional file named `atlocal.in', instantiated by `AC_CONFIG_FILES'. The configuration process produces `atconfig' and `atlocal' out of these two input files, and these two produced files are automatically read by the `testsuite' script. Here is a diagram showing the relationship between files. Files used in preparing a software package for distribution: [package.m4] -->. \ subfile-1.at ->. [local.at] ---->+ ... \ \ subfile-i.at ---->-- testsuite.at -->-- autom4te* -->testsuite ... / subfile-n.at ->' Files used in configuring a software package: .--> atconfig / [atlocal.in] --> config.status* --< \ `--> [atlocal] Files created during test suite execution: atconfig -->. .--> testsuite.log \ / >-- testsuite* --< / \ [atlocal] ->' `--> [testsuite.dir]  File: autoconf.info, Node: Autotest Logs, Prev: testsuite Scripts, Up: Using an Autotest Test Suite 19.1.2 Autotest Logs -------------------- When run, the test suite creates a log file named after itself, e.g., a test suite named `testsuite' creates `testsuite.log'. It contains a lot of information, usually more than maintainers actually need, but therefore most of the time it contains all that is needed: command line arguments A bad but unfortunately widespread habit consists of setting environment variables before the command, such as in `CC=my-home-grown-cc ./testsuite'. The test suite does not know this change, hence (i) it cannot report it to you, and (ii) it cannot preserve the value of `CC' for subsequent runs. Autoconf faced exactly the same problem, and solved it by asking users to pass the variable definitions as command line arguments. Autotest requires this rule, too, but has no means to enforce it; the log then contains a trace of the variables that were changed by the user. `ChangeLog' excerpts The topmost lines of all the `ChangeLog' files found in the source hierarchy. This is especially useful when bugs are reported against development versions of the package, since the version string does not provide sufficient information to know the exact state of the sources the user compiled. Of course, this relies on the use of a `ChangeLog'. build machine Running a test suite in a cross-compile environment is not an easy task, since it would mean having the test suite run on a machine BUILD, while running programs on a machine HOST. It is much simpler to run both the test suite and the programs on HOST, but then, from the point of view of the test suite, there remains a single environment, HOST = BUILD. The log contains relevant information on the state of the BUILD machine, including some important environment variables. tested programs The absolute file name and answers to `--version' of the tested programs (see *note Writing Testsuites::, `AT_TESTED'). configuration log The contents of `config.log', as created by `configure', are appended. It contains the configuration flags and a detailed report on the configuration itself.  File: autoconf.info, Node: Writing Testsuites, Next: testsuite Invocation, Prev: Using an Autotest Test Suite, Up: Using Autotest 19.2 Writing `testsuite.at' =========================== The `testsuite.at' is a Bourne shell script making use of special Autotest M4 macros. It often contains a call to `AT_INIT' near its beginning followed by one call to `m4_include' per source file for tests. Each such included file, or the remainder of `testsuite.at' if include files are not used, contain a sequence of test groups. Each test group begins with a call to `AT_SETUP', then an arbitrary number of shell commands or calls to `AT_CHECK', and then completes with a call to `AT_CLEANUP'. Multiple test groups can be categorized by a call to `AT_BANNER'. All of the public Autotest macros have all-uppercase names in the namespace `^AT_' to prevent them from accidentally conflicting with other text; Autoconf also reserves the namespace `^_AT_' for internal macros. All shell variables used in the testsuite for internal purposes have mostly-lowercase names starting with `at_'. Autotest also uses here-document delimiters in the namespace `^_AT[A-Z]', and makes use of the file system namespace `^at-'. Since Autoconf is built on top of M4sugar (*note Programming in M4sugar::) and M4sh (*note Programming in M4sh::), you must also be aware of those namespaces (`^_?\(m4\|AS\)_'). In general, you _should not use_ the namespace of a package that does not own the macro or shell code you are writing. -- Macro: AT_INIT ([NAME]) Initialize Autotest. Giving a NAME to the test suite is encouraged if your package includes several test suites. Before this macro is called, `AT_PACKAGE_STRING' and `AT_PACKAGE_BUGREPORT' must be defined, which are used to display information about the testsuite to the user. Typically, these macros are provided by a file `package.m4' built by `make' (*note Making testsuite Scripts::), in order to inherit the package name, version, and bug reporting address from `configure.ac'. -- Macro: AT_COPYRIGHT (COPYRIGHT-NOTICE) State that, in addition to the Free Software Foundation's copyright on the Autotest macros, parts of your test suite are covered by COPYRIGHT-NOTICE. The COPYRIGHT-NOTICE shows up in both the head of `testsuite' and in `testsuite --version'. -- Macro: AT_ARG_OPTION (OPTIONS, HELP-TEXT, [ACTION-IF-GIVEN], [ACTION-IF-NOT-GIVEN]) Accept options from the space-separated list OPTIONS, a list that has leading dashes removed from the options. Long options will be prefixed with `--', single-character options with `-'. The first word in this list is the primary OPTION, any others are assumed to be short-hand aliases. The variable associated with it is `at_arg_OPTION', with any dashes in OPTION replaced with underscores. If the user passes `--OPTION' to the `testsuite', the variable will be set to `:'. If the user does not pass the option, or passes `--no-OPTION', then the variable will be set to `false'. ACTION-IF-GIVEN is run each time the option is encountered; here, the variable `at_optarg' will be set to `:' or `false' as appropriate. `at_optarg' is actually just a copy of `at_arg_OPTION'. ACTION-IF-NOT-GIVEN will be run once after option parsing is complete and if no option from OPTIONS was used. HELP-TEXT is added to the end of the list of options shown in `testsuite --help' (*note AS_HELP_STRING::). It is recommended that you use a package-specific prefix to OPTIONS names in order to avoid clashes with future Autotest built-in options. -- Macro: AT_ARG_OPTION_ARG (OPTIONS, HELP-TEXT, [ACTION-IF-GIVEN], [ACTION-IF-NOT-GIVEN]) Accept options with arguments from the space-separated list OPTIONS, a list that has leading dashes removed from the options. Long options will be prefixed with `--', single-character options with `-'. The first word in this list is the primary OPTION, any others are assumed to be short-hand aliases. The variable associated with it is `at_arg_OPTION', with any dashes in OPTION replaced with underscores. If the user passes `--OPTION=ARG' or `--OPTION ARG' to the `testsuite', the variable will be set to `ARG'. ACTION-IF-GIVEN is run each time the option is encountered; here, the variable `at_optarg' will be set to `ARG'. `at_optarg' is actually just a copy of `at_arg_OPTION'. ACTION-IF-NOT-GIVEN will be run once after option parsing is complete and if no option from OPTIONS was used. HELP-TEXT is added to the end of the list of options shown in `testsuite --help' (*note AS_HELP_STRING::). It is recommended that you use a package-specific prefix to OPTIONS names in order to avoid clashes with future Autotest built-in options. -- Macro: AT_COLOR_TESTS Enable colored test results by default when the output is connected to a terminal. -- Macro: AT_TESTED (EXECUTABLES) Log the file name and answer to `--version' of each program in space-separated list EXECUTABLES. Several invocations register new executables, in other words, don't fear registering one program several times. Autotest test suites rely on `PATH' to find the tested program. This avoids the need to generate absolute names of the various tools, and makes it possible to test installed programs. Therefore, knowing which programs are being exercised is crucial to understanding problems in the test suite itself, or its occasional misuses. It is a good idea to also subscribe foreign programs you depend upon, to avoid incompatible diagnostics. -- Macro: AT_BANNER (TEST-CATEGORY-NAME) This macro identifies the start of a category of related test groups. When the resulting `testsuite' is invoked with more than one test group to run, its output will include a banner containing TEST-CATEGORY-NAME prior to any tests run from that category. The banner should be no more than about 40 or 50 characters. A blank banner indicates uncategorized tests; an empty line will be inserted after tests from an earlier category, effectively ending that category. -- Macro: AT_SETUP (TEST-GROUP-NAME) This macro starts a group of related tests, all to be executed in the same subshell. It accepts a single argument, which holds a few words (no more than about 30 or 40 characters) quickly describing the purpose of the test group being started. TEST-GROUP-NAME must not expand to unbalanced quotes, although quadrigraphs can be used. -- Macro: AT_KEYWORDS (KEYWORDS) Associate the space-separated list of KEYWORDS to the enclosing test group. This makes it possible to run "slices" of the test suite. For instance, if some of your test groups exercise some `foo' feature, then using `AT_KEYWORDS(foo)' lets you run `./testsuite -k foo' to run exclusively these test groups. The TEST-GROUP-NAME of the test group is automatically recorded to `AT_KEYWORDS'. Several invocations within a test group accumulate new keywords. In other words, don't fear registering the same keyword several times in a test group. -- Macro: AT_CAPTURE_FILE (FILE) If the current test group fails, log the contents of FILE. Several identical calls within one test group have no additional effect. -- Macro: AT_FAIL_IF (SHELL-CONDITION) Make the test group fail and skip the rest of its execution, if SHELL-CONDITION is true. SHELL-CONDITION is a shell expression such as a `test' command. Tests before `AT_FAIL_IF' will be executed and may still cause the test group to be skipped. You can instantiate this macro many times from within the same test group. You should use this macro only for very simple failure conditions. If the SHELL-CONDITION could emit any kind of output you should instead use `AT_CHECK' like AT_CHECK([if SHELL-CONDITION; then exit 99; fi]) so that such output is properly recorded in the `testsuite.log' file. -- Macro: AT_SKIP_IF (SHELL-CONDITION) Determine whether the test should be skipped because it requires features that are unsupported on the machine under test. SHELL-CONDITION is a shell expression such as a `test' command. Tests before `AT_SKIP_IF' will be executed and may still cause the test group to fail. You can instantiate this macro many times from within the same test group. You should use this macro only for very simple skip conditions. If the SHELL-CONDITION could emit any kind of output you should instead use `AT_CHECK' like AT_CHECK([if SHELL-CONDITION; then exit 77; fi]) so that such output is properly recorded in the `testsuite.log' file. -- Macro: AT_XFAIL_IF (SHELL-CONDITION) Determine whether the test is expected to fail because it is a known bug (for unsupported features, you should skip the test). SHELL-CONDITION is a shell expression such as a `test' command; you can instantiate this macro many times from within the same test group, and one of the conditions is enough to turn the test into an expected failure. -- Macro: AT_CLEANUP End the current test group. -- Macro: AT_DATA (FILE, CONTENTS) Initialize an input data FILE with given CONTENTS. Of course, the CONTENTS have to be properly quoted between square brackets to protect against included commas or spurious M4 expansion. CONTENTS must be empty or end with a newline. FILE must be a single shell word that expands into a single file name. -- Macro: AT_CHECK (COMMANDS, [STATUS = `0'], [STDOUT], [STDERR], [RUN-IF-FAIL], [RUN-IF-PASS]) -- Macro: AT_CHECK_UNQUOTED (COMMANDS, [STATUS = `0'], [STDOUT], [STDERR], [RUN-IF-FAIL], [RUN-IF-PASS]) Execute a test by performing given shell COMMANDS in a subshell. COMMANDS is output as-is, so shell expansions are honored. These commands should normally exit with STATUS, while producing expected STDOUT and STDERR contents. If COMMANDS exit with unexpected status 77, then the rest of the test group is skipped. If COMMANDS exit with unexpected status 99, then the test group is immediately failed. Otherwise, if this test fails, run shell commands RUN-IF-FAIL or, if this test passes, run shell commands RUN-IF-PASS, both inside the current shell execution environment. At the beginning of RUN-IF-FAIL and RUN-IF-PASS, the status of COMMANDS is available in the `at_status' shell variable. This macro must be invoked in between `AT_SETUP' and `AT_CLEANUP'. If STATUS is the literal `ignore', then the corresponding exit status is not checked, except for the special cases of 77 (skip) and 99 (hard failure). The existence of hard failures allows one to mark a test as an expected failure with `AT_XFAIL_IF' because a feature has not yet been implemented, but to still distinguish between gracefully handling the missing feature and dumping core. A hard failure also inhibits post-test actions in RUN-IF-FAIL. If the value of the STDOUT or STDERR parameter is one of the literals in the following table, then the test treats the output according to the rules of that literal. Otherwise, the value of the parameter is treated as text that must exactly match the output given by COMMANDS on standard output and standard error (including an empty parameter for no output); any differences are captured in the testsuite log and the test is failed (unless an unexpected exit status of 77 skipped the test instead). The difference between `AT_CHECK' and `AT_CHECK_UNQUOTED' is that only the latter performs shell variable expansion (`$'), command substitution (``'), and backslash escaping (`\') on comparison text given in the STDOUT and STDERR arguments; if the text includes a trailing newline, this would be the same as if it were specified via an unquoted here-document. (However, there is no difference in the interpretation of COMMANDS). `ignore' The content of the output is ignored, but still captured in the test group log (if the testsuite is run with option `-v', the test group log is displayed as the test is run; if the test group later fails, the test group log is also copied into the overall testsuite log). This action is valid for both STDOUT and STDERR. `ignore-nolog' The content of the output is ignored, and nothing is captured in the log files. If COMMANDS are likely to produce binary output (including long lines) or large amounts of output, then logging the output can make it harder to locate details related to subsequent tests within the group, and could potentially corrupt terminal display of a user running `testsuite -v'. `stdout' For the STDOUT parameter, capture the content of standard output to both the file `stdout' and the test group log. Subsequent commands in the test group can then post-process the file. This action is often used when it is desired to use `grep' to look for a substring in the output, or when the output must be post-processed to normalize error messages into a common form. `stderr' Like `stdout', except that it only works for the STDERR parameter, and the standard error capture file will be named `stderr'. `stdout-nolog' `stderr-nolog' Like `stdout' or `stderr', except that the captured output is not duplicated into the test group log. This action is particularly useful for an intermediate check that produces large amounts of data, which will be followed by another check that filters down to the relevant data, as it makes it easier to locate details in the log. `expout' For the STDOUT parameter, compare standard output contents with the previously created file `expout', and list any differences in the testsuite log. `experr' Like `expout', except that it only works for the STDERR parameter, and the standard error contents are compared with `experr'. -- Macro: AT_CHECK_EUNIT (MODULE, TEST-SPEC, [ERLFLAGS], [RUN-IF-FAIL], [RUN-IF-PASS]) Initialize and execute an Erlang module named MODULE that performs tests following the TEST-SPEC EUnit test specification. TEST-SPEC must be a valid EUnit test specification, as defined in the EUnit Reference Manual (http://erlang.org/doc/apps/eunit/index.html). ERLFLAGS are optional command-line options passed to the Erlang interpreter to execute the test Erlang module. Typically, ERLFLAGS defines at least the paths to directories containing the compiled Erlang modules under test, as `-pa path1 path2 ...'. For example, the unit tests associated with Erlang module `testme', which compiled code is in subdirectory `src', can be performed with: AT_CHECK_EUNIT([testme_testsuite], [{module, testme}], [-pa "${abs_top_builddir}/src"]) This macro must be invoked in between `AT_SETUP' and `AT_CLEANUP'. Variables `ERL', `ERLC', and (optionally) `ERLCFLAGS' must be defined as the path of the Erlang interpreter, the path of the Erlang compiler, and the command-line flags to pass to the compiler, respectively. Those variables should be configured in `configure.ac' using the `AC_ERLANG_PATH_ERL' and `AC_ERLANG_PATH_ERLC' macros, and the configured values of those variables are automatically defined in the testsuite. If `ERL' or `ERLC' is not defined, the test group is skipped. If the EUnit library cannot be found, i.e. if module `eunit' cannot be loaded, the test group is skipped. Otherwise, if TEST-SPEC is an invalid EUnit test specification, the test group fails. Otherwise, if the EUnit test passes, shell commands RUN-IF-PASS are executed or, if the EUnit test fails, shell commands RUN-IF-FAIL are executed and the test group fails. Only the generated test Erlang module is automatically compiled and executed. If TEST-SPEC involves testing other Erlang modules, e.g. module `testme' in the example above, those modules must be already compiled. If the testsuite is run in verbose mode, with option `--verbose', EUnit is also run in verbose mode to output more details about individual unit tests.  File: autoconf.info, Node: testsuite Invocation, Next: Making testsuite Scripts, Prev: Writing Testsuites, Up: Using Autotest 19.3 Running `testsuite' Scripts ================================ Autotest test suites support the following options: `--help' `-h' Display the list of options and exit successfully. `--version' `-V' Display the version of the test suite and exit successfully. `--directory=DIR' `-C DIR' Change the current directory to DIR before creating any files. Useful for running the testsuite in a subdirectory from a top-level Makefile. `--jobs[=N]' `-j[N]' Run N tests in parallel, if possible. If N is not given, run all given tests in parallel. Note that there should be no space before the argument to `-j', as `-j NUMBER' denotes the separate arguments `-j' and `NUMBER', see below. In parallel mode, the standard input device of the testsuite script is not available to commands inside a test group. Furthermore, banner lines are not printed, and the summary line for each test group is output after the test group completes. Summary lines may appear unordered. If verbose and trace output are enabled (see below), they may appear intermixed from concurrently running tests. Parallel mode requires the `mkfifo' command to work, and will be silently disabled otherwise. `--clean' `-c' Remove all the files the test suite might have created and exit. Meant for `clean' Make targets. `--list' `-l' List all the tests (or only the selection), including their possible keywords. By default all tests are performed (or described with `--list') silently in the default environment, but the environment, set of tests, and verbosity level can be tuned: `VARIABLE=VALUE' Set the environment VARIABLE to VALUE. Use this rather than `FOO=foo ./testsuite' as debugging scripts would then run in a different environment. The variable `AUTOTEST_PATH' specifies the testing path to prepend to `PATH'. Relative directory names (not starting with `/') are considered to be relative to the top level of the package being built. All directories are made absolute, first starting from the top level _build_ tree, then from the _source_ tree. For instance `./testsuite AUTOTEST_PATH=tests:bin' for a `/src/foo-1.0' source package built in `/tmp/foo' results in `/tmp/foo/tests:/tmp/foo/bin' and then `/src/foo-1.0/tests:/src/foo-1.0/bin' being prepended to `PATH'. `NUMBER' `NUMBER-NUMBER' `NUMBER-' `-NUMBER' Add the corresponding test groups, with obvious semantics, to the selection. `--keywords=KEYWORDS' `-k KEYWORDS' Add to the selection the test groups with title or keywords (arguments to `AT_SETUP' or `AT_KEYWORDS') that match _all_ keywords of the comma separated list KEYWORDS, case-insensitively. Use `!' immediately before the keyword to invert the selection for this keyword. By default, the keywords match whole words; enclose them in `.*' to also match parts of words. For example, running ./testsuite -k 'autoupdate,.*FUNC.*' selects all tests tagged `autoupdate' _and_ with tags containing `FUNC' (as in `AC_CHECK_FUNC', `AC_FUNC_ALLOCA', etc.), while ./testsuite -k '!autoupdate' -k '.*FUNC.*' selects all tests not tagged `autoupdate' _or_ with tags containing `FUNC'. `--errexit' `-e' If any test fails, immediately abort testing. This implies `--debug': post test group clean up, and top-level logging are inhibited. This option is meant for the full test suite, it is not really useful for generated debugging scripts. If the testsuite is run in parallel mode using `--jobs', then concurrently running tests will finish before exiting. `--verbose' `-v' Force more verbosity in the detailed output of what is being done. This is the default for debugging scripts. `--color' `--color[=never|auto|always]' Enable colored test results. Without an argument, or with `always', test results will be colored. With `never', color mode is turned off. Otherwise, if either the macro `AT_COLOR_TESTS' is used by the testsuite author, or the argument `auto' is given, then test results are colored if standard output is connected to a terminal. `--debug' `-d' Do not remove the files after a test group was performed--but they are still removed _before_, therefore using this option is sane when running several test groups. Create debugging scripts. Do not overwrite the top-level log (in order to preserve a supposedly existing full log file). This is the default for debugging scripts, but it can also be useful to debug the testsuite itself. `--recheck' Add to the selection all test groups that failed or passed unexpectedly during the last non-debugging test run. `--trace' `-x' Trigger shell tracing of the test groups. Besides these options accepted by every Autotest testsuite, the testsuite author might have added package-specific options via the `AT_ARG_OPTION' and `AT_ARG_OPTION_ARG' macros (*note Writing Testsuites::); refer to `testsuite --help' and the package documentation for details.  File: autoconf.info, Node: Making testsuite Scripts, Prev: testsuite Invocation, Up: Using Autotest 19.4 Making `testsuite' Scripts =============================== For putting Autotest into movement, you need some configuration and makefile machinery. We recommend, at least if your package uses deep or shallow hierarchies, that you use `tests/' as the name of the directory holding all your tests and their makefile. Here is a check list of things to do. - Make sure to create the file `package.m4', which defines the identity of the package. It must define `AT_PACKAGE_STRING', the full signature of the package, and `AT_PACKAGE_BUGREPORT', the address to which bug reports should be sent. For sake of completeness, we suggest that you also define `AT_PACKAGE_NAME', `AT_PACKAGE_TARNAME', `AT_PACKAGE_VERSION', and `AT_PACKAGE_URL'. *Note Initializing configure::, for a description of these variables. Be sure to distribute `package.m4' and to put it into the source hierarchy: the test suite ought to be shipped! See below for an example `Makefile' excerpt. - Invoke `AC_CONFIG_TESTDIR'. -- Macro: AC_CONFIG_TESTDIR (DIRECTORY, [TEST-PATH = `directory']) An Autotest test suite is to be configured in DIRECTORY. This macro causes `DIRECTORY/atconfig' to be created by `config.status' and sets the default `AUTOTEST_PATH' to TEST-PATH (*note testsuite Invocation::). - Still within `configure.ac', as appropriate, ensure that some `AC_CONFIG_FILES' command includes substitution for `tests/atlocal'. - The appropriate `Makefile' should be modified so the validation in your package is triggered by `make check'. An example is provided below. With Automake, here is a minimal example for inclusion in `tests/Makefile.am', in order to link `make check' with a validation suite. # The `:;' works around a Bash 3.2 bug when the output is not writable. $(srcdir)/package.m4: $(top_srcdir)/configure.ac :;{ \ echo '# Signature of the current package.' && \ echo 'm4_define([AT_PACKAGE_NAME],' && \ echo ' [$(PACKAGE_NAME)])' && \ echo 'm4_define([AT_PACKAGE_TARNAME],' && \ echo ' [$(PACKAGE_TARNAME)])' && \ echo 'm4_define([AT_PACKAGE_VERSION],' && \ echo ' [$(PACKAGE_VERSION)])' && \ echo 'm4_define([AT_PACKAGE_STRING],' && \ echo ' [$(PACKAGE_STRING)])' && \ echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \ echo ' [$(PACKAGE_BUGREPORT)])'; \ echo 'm4_define([AT_PACKAGE_URL],' && \ echo ' [$(PACKAGE_URL)])'; \ } >'$(srcdir)/package.m4' EXTRA_DIST = testsuite.at $(srcdir)/package.m4 $(TESTSUITE) atlocal.in TESTSUITE = $(srcdir)/testsuite check-local: atconfig atlocal $(TESTSUITE) $(SHELL) '$(TESTSUITE)' $(TESTSUITEFLAGS) installcheck-local: atconfig atlocal $(TESTSUITE) $(SHELL) '$(TESTSUITE)' AUTOTEST_PATH='$(bindir)' \ $(TESTSUITEFLAGS) clean-local: test ! -f '$(TESTSUITE)' || \ $(SHELL) '$(TESTSUITE)' --clean AUTOM4TE = $(SHELL) $(srcdir)/build-aux/missing --run autom4te AUTOTEST = $(AUTOM4TE) --language=autotest $(TESTSUITE): $(srcdir)/testsuite.at $(srcdir)/package.m4 $(AUTOTEST) -I '$(srcdir)' -o $@.tmp $@.at mv $@.tmp $@ Note that the built testsuite is distributed; this is necessary because users might not have Autoconf installed, and thus would not be able to rebuild it. Likewise, the use of `missing' provides the user with a nicer error message if they modify a source file to the testsuite, and accidentally trigger the rebuild rules. You might want to list explicitly the dependencies, i.e., the list of the files `testsuite.at' includes. If you don't use Automake, you should include the above example in `tests/Makefile.in', along with additional lines inspired from the following: subdir = tests PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_URL = @PACKAGE_URL@ atconfig: $(top_builddir)/config.status cd $(top_builddir) && \ $(SHELL) ./config.status $(subdir)/$@ atlocal: $(srcdir)/atlocal.in $(top_builddir)/config.status cd $(top_builddir) && \ $(SHELL) ./config.status $(subdir)/$@ and manage to have `$(EXTRA_DIST)' distributed. You will also want to distribute the file `build-aux/missing' from the Automake project; a copy of this file resides in the Autoconf source tree. With all this in place, and if you have not initialized `TESTSUITEFLAGS' within your makefile, you can fine-tune test suite execution with this variable, for example: make check TESTSUITEFLAGS='-v -d -x 75 -k AC_PROG_CC CFLAGS=-g'  File: autoconf.info, Node: FAQ, Next: History, Prev: Using Autotest, Up: Top 20 Frequent Autoconf Questions, with answers ******************************************** Several questions about Autoconf come up occasionally. Here some of them are addressed. * Menu: * Distributing:: Distributing `configure' scripts * Why GNU M4:: Why not use the standard M4? * Bootstrapping:: Autoconf and GNU M4 require each other? * Why Not Imake:: Why GNU uses `configure' instead of Imake * Defining Directories:: Passing `datadir' to program * Autom4te Cache:: What is it? Can I remove it? * Present But Cannot Be Compiled:: Compiler and Preprocessor Disagree * Expanded Before Required:: Expanded Before Required * Debugging:: Debugging `configure' scripts  File: autoconf.info, Node: Distributing, Next: Why GNU M4, Up: FAQ 20.1 Distributing `configure' Scripts ===================================== What are the restrictions on distributing `configure' scripts that Autoconf generates? How does that affect my programs that use them? There are no restrictions on how the configuration scripts that Autoconf produces may be distributed or used. In Autoconf version 1, they were covered by the GNU General Public License. We still encourage software authors to distribute their work under terms like those of the GPL, but doing so is not required to use Autoconf. Of the other files that might be used with `configure', `config.h.in' is under whatever copyright you use for your `configure.ac'. `config.sub' and `config.guess' have an exception to the GPL when they are used with an Autoconf-generated `configure' script, which permits you to distribute them under the same terms as the rest of your package. `install-sh' is from the X Consortium and is not copyrighted.  File: autoconf.info, Node: Why GNU M4, Next: Bootstrapping, Prev: Distributing, Up: FAQ 20.2 Why Require GNU M4? ======================== Why does Autoconf require GNU M4? Many M4 implementations have hard-coded limitations on the size and number of macros that Autoconf exceeds. They also lack several builtin macros that it would be difficult to get along without in a sophisticated application like Autoconf, including: m4_builtin m4_indir m4_bpatsubst __file__ __line__ Autoconf requires version 1.4.6 or later of GNU M4. Since only software maintainers need to use Autoconf, and since GNU M4 is simple to configure and install, it seems reasonable to require GNU M4 to be installed also. Many maintainers of GNU and other free software already have most of the GNU utilities installed, since they prefer them.  File: autoconf.info, Node: Bootstrapping, Next: Why Not Imake, Prev: Why GNU M4, Up: FAQ 20.3 How Can I Bootstrap? ========================= If Autoconf requires GNU M4 and GNU M4 has an Autoconf `configure' script, how do I bootstrap? It seems like a chicken and egg problem! This is a misunderstanding. Although GNU M4 does come with a `configure' script produced by Autoconf, Autoconf is not required in order to run the script and install GNU M4. Autoconf is only required if you want to change the M4 `configure' script, which few people have to do (mainly its maintainer).  File: autoconf.info, Node: Why Not Imake, Next: Defining Directories, Prev: Bootstrapping, Up: FAQ 20.4 Why Not Imake? =================== Why not use Imake instead of `configure' scripts? Several people have written addressing this question, so adaptations of their explanations are included here. The following answer is based on one written by Richard Pixley: Autoconf generated scripts frequently work on machines that it has never been set up to handle before. That is, it does a good job of inferring a configuration for a new system. Imake cannot do this. Imake uses a common database of host specific data. For X11, this makes sense because the distribution is made as a collection of tools, by one central authority who has control over the database. GNU tools are not released this way. Each GNU tool has a maintainer; these maintainers are scattered across the world. Using a common database would be a maintenance nightmare. Autoconf may appear to be this kind of database, but in fact it is not. Instead of listing host dependencies, it lists program requirements. If you view the GNU suite as a collection of native tools, then the problems are similar. But the GNU development tools can be configured as cross tools in almost any host+target permutation. All of these configurations can be installed concurrently. They can even be configured to share host independent files across hosts. Imake doesn't address these issues. Imake templates are a form of standardization. The GNU coding standards address the same issues without necessarily imposing the same restrictions. Here is some further explanation, written by Per Bothner: One of the advantages of Imake is that it is easy to generate large makefiles using the `#include' and macro mechanisms of `cpp'. However, `cpp' is not programmable: it has limited conditional facilities, and no looping. And `cpp' cannot inspect its environment. All of these problems are solved by using `sh' instead of `cpp'. The shell is fully programmable, has macro substitution, can execute (or source) other shell scripts, and can inspect its environment. Paul Eggert elaborates more: With Autoconf, installers need not assume that Imake itself is already installed and working well. This may not seem like much of an advantage to people who are accustomed to Imake. But on many hosts Imake is not installed or the default installation is not working well, and requiring Imake to install a package hinders the acceptance of that package on those hosts. For example, the Imake template and configuration files might not be installed properly on a host, or the Imake build procedure might wrongly assume that all source files are in one big directory tree, or the Imake configuration might assume one compiler whereas the package or the installer needs to use another, or there might be a version mismatch between the Imake expected by the package and the Imake supported by the host. These problems are much rarer with Autoconf, where each package comes with its own independent configuration processor. Also, Imake often suffers from unexpected interactions between `make' and the installer's C preprocessor. The fundamental problem here is that the C preprocessor was designed to preprocess C programs, not makefiles. This is much less of a problem with Autoconf, which uses the general-purpose preprocessor M4, and where the package's author (rather than the installer) does the preprocessing in a standard way. Finally, Mark Eichin notes: Imake isn't all that extensible, either. In order to add new features to Imake, you need to provide your own project template, and duplicate most of the features of the existing one. This means that for a sophisticated project, using the vendor-provided Imake templates fails to provide any leverage--since they don't cover anything that your own project needs (unless it is an X11 program). On the other side, though: The one advantage that Imake has over `configure': `Imakefile' files tend to be much shorter (likewise, less redundant) than `Makefile.in' files. There is a fix to this, however--at least for the Kerberos V5 tree, we've modified things to call in common `post.in' and `pre.in' makefile fragments for the entire tree. This means that a lot of common things don't have to be duplicated, even though they normally are in `configure' setups.  File: autoconf.info, Node: Defining Directories, Next: Autom4te Cache, Prev: Why Not Imake, Up: FAQ 20.5 How Do I `#define' Installation Directories? ================================================= My program needs library files, installed in `datadir' and similar. If I use AC_DEFINE_UNQUOTED([DATADIR], [$datadir], [Define to the read-only architecture-independent data directory.]) I get #define DATADIR "${prefix}/share" As already explained, this behavior is on purpose, mandated by the GNU Coding Standards, see *note Installation Directory Variables::. There are several means to achieve a similar goal: - Do not use `AC_DEFINE' but use your makefile to pass the actual value of `datadir' via compilation flags. *Note Installation Directory Variables::, for the details. - This solution can be simplified when compiling a program: you may either extend the `CPPFLAGS': CPPFLAGS = -DDATADIR='"$(datadir)"' @CPPFLAGS@ If you are using Automake, you should use `AM_CPPFLAGS' instead: AM_CPPFLAGS = -DDATADIR='"$(datadir)"' Alternatively, create a dedicated header file: DISTCLEANFILES = myprog-paths.h myprog-paths.h: Makefile echo '#define DATADIR "$(datadir)"' >$@ The gnulib module `configmake' provides such a header with all the standard directory variables defined, *note configmake: (gnulib)configmake. - Use `AC_DEFINE' but have `configure' compute the literal value of `datadir' and others. Many people have wrapped macros to automate this task; for an example, see the macro `AC_DEFINE_DIR' from the Autoconf Macro Archive (http://www.gnu.org/software/autoconf-archive/). This solution does not conform to the GNU Coding Standards. - Note that all the previous solutions hard wire the absolute name of these directories in the executables, which is not a good property. You may try to compute the names relative to `prefix', and try to find `prefix' at runtime, this way your package is relocatable.  File: autoconf.info, Node: Autom4te Cache, Next: Present But Cannot Be Compiled, Prev: Defining Directories, Up: FAQ 20.6 What is `autom4te.cache'? ============================== What is this directory `autom4te.cache'? Can I safely remove it? In the GNU Build System, `configure.ac' plays a central role and is read by many tools: `autoconf' to create `configure', `autoheader' to create `config.h.in', `automake' to create `Makefile.in', `autoscan' to check the completeness of `configure.ac', `autoreconf' to check the GNU Build System components that are used. To "read `configure.ac'" actually means to compile it with M4, which can be a long process for complex `configure.ac'. This is why all these tools, instead of running directly M4, invoke `autom4te' (*note autom4te Invocation::) which, while answering to a specific demand, stores additional information in `autom4te.cache' for future runs. For instance, if you run `autoconf', behind the scenes, `autom4te' also stores information for the other tools, so that when you invoke `autoheader' or `automake' etc., reprocessing `configure.ac' is not needed. The speed up is frequently 30%, and is increasing with the size of `configure.ac'. But it is and remains being simply a cache: you can safely remove it. Can I permanently get rid of it? The creation of this cache can be disabled from `~/.autom4te.cfg', see *note Customizing autom4te::, for more details. You should be aware that disabling the cache slows down the Autoconf test suite by 40%. The more GNU Build System components are used, the more the cache is useful; for instance running `autoreconf -f' on the Core Utilities is twice slower without the cache _although `--force' implies that the cache is not fully exploited_, and eight times slower than without `--force'.  File: autoconf.info, Node: Present But Cannot Be Compiled, Next: Expanded Before Required, Prev: Autom4te Cache, Up: FAQ 20.7 Header Present But Cannot Be Compiled ========================================== The most important guideline to bear in mind when checking for features is to mimic as much as possible the intended use. Unfortunately, old versions of `AC_CHECK_HEADER' and `AC_CHECK_HEADERS' failed to follow this idea, and called the preprocessor, instead of the compiler, to check for headers. As a result, incompatibilities between headers went unnoticed during configuration, and maintainers finally had to deal with this issue elsewhere. The transition began with Autoconf 2.56. As of Autoconf 2.64 both checks are performed, and `configure' complains loudly if the compiler and the preprocessor do not agree. However, only the compiler result is considered. Consider the following example: $ cat number.h typedef int number; $ cat pi.h const number pi = 3; $ cat configure.ac AC_INIT([Example], [1.0], [bug-example@example.org]) AC_CHECK_HEADERS([pi.h]) $ autoconf -Wall $ ./configure checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... grep checking for egrep... grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking pi.h usability... no checking pi.h presence... yes configure: WARNING: pi.h: present but cannot be compiled configure: WARNING: pi.h: check for missing prerequisite headers? configure: WARNING: pi.h: see the Autoconf documentation configure: WARNING: pi.h: section "Present But Cannot Be Compiled" configure: WARNING: pi.h: proceeding with the compiler's result configure: WARNING: ## -------------------------------------- ## configure: WARNING: ## Report this to bug-example@example.org ## configure: WARNING: ## -------------------------------------- ## checking for pi.h... yes The proper way the handle this case is using the fourth argument (*note Generic Headers::): $ cat configure.ac AC_INIT([Example], [1.0], [bug-example@example.org]) AC_CHECK_HEADERS([number.h pi.h], [], [], [[#ifdef HAVE_NUMBER_H # include #endif ]]) $ autoconf -Wall $ ./configure checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for number.h... yes checking for pi.h... yes See *note Particular Headers::, for a list of headers with their prerequisites.  File: autoconf.info, Node: Expanded Before Required, Next: Debugging, Prev: Present But Cannot Be Compiled, Up: FAQ 20.8 Expanded Before Required ============================= Older versions of Autoconf silently built files with incorrect ordering between dependent macros if an outer macro first expanded, then later indirectly required, an inner macro. Starting with Autoconf 2.64, this situation no longer generates out-of-order code, but results in duplicate output and a syntax warning: $ cat configure.ac =>AC_DEFUN([TESTA], [[echo in A =>if test -n "$SEEN_A" ; then echo duplicate ; fi =>SEEN_A=:]]) =>AC_DEFUN([TESTB], [AC_REQUIRE([TESTA])[echo in B =>if test -z "$SEEN_A" ; then echo bug ; fi]]) =>AC_DEFUN([TESTC], [AC_REQUIRE([TESTB])[echo in C]]) =>AC_DEFUN([OUTER], [[echo in OUTER] =>TESTA =>TESTC]) =>AC_INIT =>OUTER =>AC_OUTPUT $ autoconf =>configure.ac:11: warning: AC_REQUIRE: => `TESTA' was expanded before it was required =>configure.ac:4: TESTB is expanded from... =>configure.ac:6: TESTC is expanded from... =>configure.ac:7: OUTER is expanded from... =>configure.ac:11: the top level To avoid this warning, decide what purpose the macro in question serves. If it only needs to be expanded once (for example, if it provides initialization text used by later macros), then the simplest fix is to change the macro to be declared with `AC_DEFUN_ONCE' (*note One-Shot Macros::), although this only works in Autoconf 2.64 and newer. A more portable fix is to change all instances of direct calls to instead go through `AC_REQUIRE' (*note Prerequisite Macros::). If, instead, the macro is parameterized by arguments or by the current definition of other macros in the m4 environment, then the macro should always be directly expanded instead of required. For another case study, consider this example trimmed down from an actual package. Originally, the package contained shell code and multiple macro invocations at the top level of `configure.ac': AC_DEFUN([FOO], [AC_COMPILE_IFELSE([...])]) foobar= AC_PROG_CC FOO but that was getting complex, so the author wanted to offload some of the text into a new macro in another file included via `aclocal.m4'. The nai"ve approach merely wraps the text in a new macro: AC_DEFUN([FOO], [AC_COMPILE_IFELSE([...])]) AC_DEFUN([BAR], [ foobar= AC_PROG_CC FOO ]) BAR With older versions of Autoconf, the setting of `foobar=' occurs before the single compiler check, as the author intended. But with Autoconf 2.64, this issues the "expanded before it was required" warning for `AC_PROG_CC', and outputs two copies of the compiler check, one before `foobar=', and one after. To understand why this is happening, remember that the use of `AC_COMPILE_IFELSE' includes a call to `AC_REQUIRE([AC_PROG_CC])' under the hood. According to the documented semantics of `AC_REQUIRE', this means that `AC_PROG_CC' _must_ occur before the body of the outermost `AC_DEFUN', which in this case is `BAR', thus preceding the use of `foobar='. The older versions of Autoconf were broken with regards to the rules of `AC_REQUIRE', which explains why the code changed from one over to two copies of `AC_PROG_CC' when upgrading autoconf. In other words, the author was unknowingly relying on a bug exploit to get the desired results, and that exploit broke once the bug was fixed. So, what recourse does the author have, to restore their intended semantics of setting `foobar=' prior to a single compiler check, regardless of whether Autoconf 2.63 or 2.64 is used? One idea is to remember that only `AC_DEFUN' is impacted by `AC_REQUIRE'; there is always the possibility of using the lower-level `m4_define': AC_DEFUN([FOO], [AC_COMPILE_IFELSE([...])]) m4_define([BAR], [ foobar= AC_PROG_CC FOO ]) BAR This works great if everything is in the same file. However, it does not help in the case where the author wants to have `aclocal' find the definition of `BAR' from its own file, since `aclocal' requires the use of `AC_DEFUN'. In this case, a better fix is to recognize that if `BAR' also uses `AC_REQUIRE', then there will no longer be direct expansion prior to a subsequent require. Then, by creating yet another helper macro, the author can once again guarantee a single invocation of `AC_PROG_CC', which will still occur after `foobar='. The author can also use `AC_BEFORE' to make sure no other macro appearing before `BAR' has triggered an unwanted expansion of `AC_PROG_CC'. AC_DEFUN([FOO], [AC_COMPILE_IFELSE([...])]) AC_DEFUN([BEFORE_CC], [ foobar= ]) AC_DEFUN([BAR], [ AC_BEFORE([$0], [AC_PROG_CC])dnl AC_REQUIRE([BEFORE_CC])dnl AC_REQUIRE([AC_PROG_CC])dnl FOO ]) BAR  File: autoconf.info, Node: Debugging, Prev: Expanded Before Required, Up: FAQ 20.9 Debugging `configure' scripts ================================== While in general, `configure' scripts generated by Autoconf strive to be fairly portable to various systems, compilers, shells, and other tools, it may still be necessary to debug a failing test, broken script or makefile, or fix or override an incomplete, faulty, or erroneous test, especially during macro development. Failures can occur at all levels, in M4 syntax or semantics, shell script issues, or due to bugs in the test or the tools invoked by `configure'. Together with the rather arcane error message that `m4' and `make' may produce when their input contains syntax errors, this can make debugging rather painful. Nevertheless, here is a list of hints and strategies that may help: * When `autoconf' fails, common causes for error include: * mismatched or unbalanced parentheses or braces (*note Balancing Parentheses::), * under- or overquoted macro arguments (*note Autoconf Language::, *note Quoting and Parameters::, *note Quotation and Nested Macros::), * spaces between macro name and opening parenthesis (*note Autoconf Language::). Typically, it helps to go back to the last working version of the input and compare the differences for each of these errors. Another possibility is to sprinkle pairs of `m4_traceon' and `m4_traceoff' judiciously in the code, either without a parameter or listing some macro names and watch `m4' expand its input verbosely (*note Debugging via autom4te::). * Sometimes `autoconf' succeeds but the generated `configure' script has invalid shell syntax. You can detect this case by running `bash -n configure' or `sh -n configure'. If this command fails, the same tips apply, as if `autoconf' had failed. * Debugging `configure' script execution may be done by sprinkling pairs of `set -x' and `set +x' into the shell script before and after the region that contains a bug. Running the whole script with `SHELL -vx ./configure 2>&1 | tee LOG-FILE' with a decent SHELL may work, but produces lots of output. Here, it can help to search for markers like `checking for' a particular test in the LOG-FILE. * Alternatively, you might use a shell with debugging capabilities like bashdb (http://bashdb.sourceforge.net/). * When `configure' tests produce invalid results for your system, it may be necessary to override them: * For programs, tools or libraries variables, preprocessor, compiler, or linker flags, it is often sufficient to override them at `make' run time with some care (*note Macros and Submakes::). Since this normally won't cause `configure' to be run again with these changed settings, it may fail if the changed variable would have caused different test results from `configure', so this may work only for simple differences. * Most tests which produce their result in a substituted variable allow to override the test by setting the variable on the `configure' command line (*note Compilers and Options::, *note Defining Variables::, *note Particular Systems::). * Many tests store their result in a cache variable (*note Caching Results::). This lets you override them either on the `configure' command line as above, or through a primed cache or site file (*note Cache Files::, *note Site Defaults::). The name of a cache variable is documented with a test macro or may be inferred from *note Cache Variable Names::; the precise semantics of undocumented variables are often internal details, subject to change. * Alternatively, `configure' may produce invalid results because of uncaught programming errors, in your package or in an upstream library package. For example, when `AC_CHECK_LIB' fails to find a library with a specified function, always check `config.log'. This will reveal the exact error that produced the failing result: the library linked by `AC_CHECK_LIB' probably has a fatal bug. Conversely, as macro author, you can make it easier for users of your macro: * by minimizing dependencies between tests and between test results as far as possible, * by using `make' variables to factorize and allow override of settings at `make' run time, * by honoring the GNU Coding Standards and not overriding flags reserved for the user except temporarily during `configure' tests, * by not requiring users of your macro to use the cache variables. Instead, expose the result of the test via RUN-IF-TRUE and RUN-IF-FALSE parameters. If the result is not a boolean, then provide it through documented shell variables.  File: autoconf.info, Node: History, Next: GNU Free Documentation License, Prev: FAQ, Up: Top 21 History of Autoconf ********************** _This chapter was written by the original author, David MacKenzie._ You may be wondering, Why was Autoconf originally written? How did it get into its present form? (Why does it look like gorilla spit?) If you're not wondering, then this chapter contains no information useful to you, and you might as well skip it. If you _are_ wondering, then let there be light... * Menu: * Genesis:: Prehistory and naming of `configure' * Exodus:: The plagues of M4 and Perl * Leviticus:: The priestly code of portability arrives * Numbers:: Growth and contributors * Deuteronomy:: Approaching the promises of easy configuration  File: autoconf.info, Node: Genesis, Next: Exodus, Up: History 21.1 Genesis ============ In June 1991 I was maintaining many of the GNU utilities for the Free Software Foundation. As they were ported to more platforms and more programs were added, the number of `-D' options that users had to select in the makefile (around 20) became burdensome. Especially for me--I had to test each new release on a bunch of different systems. So I wrote a little shell script to guess some of the correct settings for the fileutils package, and released it as part of fileutils 2.0. That `configure' script worked well enough that the next month I adapted it (by hand) to create similar `configure' scripts for several other GNU utilities packages. Brian Berliner also adapted one of my scripts for his CVS revision control system. Later that summer, I learned that Richard Stallman and Richard Pixley were developing similar scripts to use in the GNU compiler tools; so I adapted my `configure' scripts to support their evolving interface: using the file name `Makefile.in' as the templates; adding `+srcdir', the first option (of many); and creating `config.status' files.  File: autoconf.info, Node: Exodus, Next: Leviticus, Prev: Genesis, Up: History 21.2 Exodus =========== As I got feedback from users, I incorporated many improvements, using Emacs to search and replace, cut and paste, similar changes in each of the scripts. As I adapted more GNU utilities packages to use `configure' scripts, updating them all by hand became impractical. Rich Murphey, the maintainer of the GNU graphics utilities, sent me mail saying that the `configure' scripts were great, and asking if I had a tool for generating them that I could send him. No, I thought, but I should! So I started to work out how to generate them. And the journey from the slavery of hand-written `configure' scripts to the abundance and ease of Autoconf began. Cygnus `configure', which was being developed at around that time, is table driven; it is meant to deal mainly with a discrete number of system types with a small number of mainly unguessable features (such as details of the object file format). The automatic configuration system that Brian Fox had developed for Bash takes a similar approach. For general use, it seems to me a hopeless cause to try to maintain an up-to-date database of which features each variant of each operating system has. It's easier and more reliable to check for most features on the fly--especially on hybrid systems that people have hacked on locally or that have patches from vendors installed. I considered using an architecture similar to that of Cygnus `configure', where there is a single `configure' script that reads pieces of `configure.in' when run. But I didn't want to have to distribute all of the feature tests with every package, so I settled on having a different `configure' made from each `configure.in' by a preprocessor. That approach also offered more control and flexibility. I looked briefly into using the Metaconfig package, by Larry Wall, Harlan Stenn, and Raphael Manfredi, but I decided not to for several reasons. The `Configure' scripts it produces are interactive, which I find quite inconvenient; I didn't like the ways it checked for some features (such as library functions); I didn't know that it was still being maintained, and the `Configure' scripts I had seen didn't work on many modern systems (such as System V R4 and NeXT); it wasn't flexible in what it could do in response to a feature's presence or absence; I found it confusing to learn; and it was too big and complex for my needs (I didn't realize then how much Autoconf would eventually have to grow). I considered using Perl to generate my style of `configure' scripts, but decided that M4 was better suited to the job of simple textual substitutions: it gets in the way less, because output is implicit. Plus, everyone already has it. (Initially I didn't rely on the GNU extensions to M4.) Also, some of my friends at the University of Maryland had recently been putting M4 front ends on several programs, including `tvtwm', and I was interested in trying out a new language.  File: autoconf.info, Node: Leviticus, Next: Numbers, Prev: Exodus, Up: History 21.3 Leviticus ============== Since my `configure' scripts determine the system's capabilities automatically, with no interactive user intervention, I decided to call the program that generates them Autoconfig. But with a version number tacked on, that name would be too long for old Unix file systems, so I shortened it to Autoconf. In the fall of 1991 I called together a group of fellow questers after the Holy Grail of portability (er, that is, alpha testers) to give me feedback as I encapsulated pieces of my handwritten scripts in M4 macros and continued to add features and improve the techniques used in the checks. Prominent among the testers were Franc,ois Pinard, who came up with the idea of making an Autoconf shell script to run M4 and check for unresolved macro calls; Richard Pixley, who suggested running the compiler instead of searching the file system to find include files and symbols, for more accurate results; Karl Berry, who got Autoconf to configure TeX and added the macro index to the documentation; and Ian Lance Taylor, who added support for creating a C header file as an alternative to putting `-D' options in a makefile, so he could use Autoconf for his UUCP package. The alpha testers cheerfully adjusted their files again and again as the names and calling conventions of the Autoconf macros changed from release to release. They all contributed many specific checks, great ideas, and bug fixes.  File: autoconf.info, Node: Numbers, Next: Deuteronomy, Prev: Leviticus, Up: History 21.4 Numbers ============ In July 1992, after months of alpha testing, I released Autoconf 1.0, and converted many GNU packages to use it. I was surprised by how positive the reaction to it was. More people started using it than I could keep track of, including people working on software that wasn't part of the GNU Project (such as TCL, FSP, and Kerberos V5). Autoconf continued to improve rapidly, as many people using the `configure' scripts reported problems they encountered. Autoconf turned out to be a good torture test for M4 implementations. Unix M4 started to dump core because of the length of the macros that Autoconf defined, and several bugs showed up in GNU M4 as well. Eventually, we realized that we needed to use some features that only GNU M4 has. 4.3BSD M4, in particular, has an impoverished set of builtin macros; the System V version is better, but still doesn't provide everything we need. More development occurred as people put Autoconf under more stresses (and to uses I hadn't anticipated). Karl Berry added checks for X11. david zuhn contributed C++ support. Franc,ois Pinard made it diagnose invalid arguments. Jim Blandy bravely coerced it into configuring GNU Emacs, laying the groundwork for several later improvements. Roland McGrath got it to configure the GNU C Library, wrote the `autoheader' script to automate the creation of C header file templates, and added a `--verbose' option to `configure'. Noah Friedman added the `--autoconf-dir' option and `AC_MACRODIR' environment variable. (He also coined the term "autoconfiscate" to mean "adapt a software package to use Autoconf".) Roland and Noah improved the quoting protection in `AC_DEFINE' and fixed many bugs, especially when I got sick of dealing with portability problems from February through June, 1993.  File: autoconf.info, Node: Deuteronomy, Prev: Numbers, Up: History 21.5 Deuteronomy ================ A long wish list for major features had accumulated, and the effect of several years of patching by various people had left some residual cruft. In April 1994, while working for Cygnus Support, I began a major revision of Autoconf. I added most of the features of the Cygnus `configure' that Autoconf had lacked, largely by adapting the relevant parts of Cygnus `configure' with the help of david zuhn and Ken Raeburn. These features include support for using `config.sub', `config.guess', `--host', and `--target'; making links to files; and running `configure' scripts in subdirectories. Adding these features enabled Ken to convert GNU `as', and Rob Savoye to convert DejaGNU, to using Autoconf. I added more features in response to other peoples' requests. Many people had asked for `configure' scripts to share the results of the checks between runs, because (particularly when configuring a large source tree, like Cygnus does) they were frustratingly slow. Mike Haertel suggested adding site-specific initialization scripts. People distributing software that had to unpack on MS-DOS asked for a way to override the `.in' extension on the file names, which produced file names like `config.h.in' containing two dots. Jim Avera did an extensive examination of the problems with quoting in `AC_DEFINE' and `AC_SUBST'; his insights led to significant improvements. Richard Stallman asked that compiler output be sent to `config.log' instead of `/dev/null', to help people debug the Emacs `configure' script. I made some other changes because of my dissatisfaction with the quality of the program. I made the messages showing results of the checks less ambiguous, always printing a result. I regularized the names of the macros and cleaned up coding style inconsistencies. I added some auxiliary utilities that I had developed to help convert source code packages to use Autoconf. With the help of Franc,ois Pinard, I made the macros not interrupt each others' messages. (That feature revealed some performance bottlenecks in GNU M4, which he hastily corrected!) I reorganized the documentation around problems people want to solve. And I began a test suite, because experience had shown that Autoconf has a pronounced tendency to regress when we change it. Again, several alpha testers gave invaluable feedback, especially Franc,ois Pinard, Jim Meyering, Karl Berry, Rob Savoye, Ken Raeburn, and Mark Eichin. Finally, version 2.0 was ready. And there was much rejoicing. (And I have free time again. I think. Yeah, right.)  File: autoconf.info, Node: GNU Free Documentation License, Next: Indices, Prev: History, Up: Top Appendix A GNU Free Documentation License ***************************************** Version 1.3, 3 November 2008 Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. `http://fsf.org/' Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. 0. PREAMBLE The purpose of this License is to make a manual, textbook, or other functional and useful document "free" in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others. This License is a kind of "copyleft", which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software. We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference. 1. APPLICABILITY AND DEFINITIONS This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The "Document", below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as "you". You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law. A "Modified Version" of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language. A "Secondary Section" is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them. The "Invariant Sections" are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none. The "Cover Texts" are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words. A "Transparent" copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not "Transparent" is called "Opaque". Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only. The "Title Page" means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, "Title Page" means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text. The "publisher" means any person or entity that distributes copies of the Document to the public. A section "Entitled XYZ" means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as "Acknowledgements", "Dedications", "Endorsements", or "History".) To "Preserve the Title" of such a section when you modify the Document means that it remains a section "Entitled XYZ" according to this definition. The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License. 2. VERBATIM COPYING You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3. You may also lend copies, under the same conditions stated above, and you may publicly display copies. 3. COPYING IN QUANTITY If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects. If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages. If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public. It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document. 4. MODIFICATIONS You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version: A. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission. B. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has fewer than five), unless they release you from this requirement. C. State on the Title page the name of the publisher of the Modified Version, as the publisher. D. Preserve all the copyright notices of the Document. E. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices. F. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below. G. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice. H. Include an unaltered copy of this License. I. Preserve the section Entitled "History", Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled "History" in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence. J. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the "History" section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission. K. For any section Entitled "Acknowledgements" or "Dedications", Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein. L. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles. M. Delete any section Entitled "Endorsements". Such a section may not be included in the Modified Version. N. Do not retitle any existing section to be Entitled "Endorsements" or to conflict in title with any Invariant Section. O. Preserve any Warranty Disclaimers. If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles. You may add a section Entitled "Endorsements", provided it contains nothing but endorsements of your Modified Version by various parties--for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard. You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one. The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version. 5. COMBINING DOCUMENTS You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers. The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work. In the combination, you must combine any sections Entitled "History" in the various original documents, forming one section Entitled "History"; likewise combine any sections Entitled "Acknowledgements", and any sections Entitled "Dedications". You must delete all sections Entitled "Endorsements." 6. COLLECTIONS OF DOCUMENTS You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects. You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document. 7. AGGREGATION WITH INDEPENDENT WORKS A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an "aggregate" if the copyright resulting from the compilation is not used to limit the legal rights of the compilation's users beyond what the individual works permit. When the Document is included in an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document. If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document's Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate. 8. TRANSLATION Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail. If a section in the Document is Entitled "Acknowledgements", "Dedications", or "History", the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title. 9. TERMINATION You may not copy, modify, sublicense, or distribute the Document except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, or distribute it is void, and will automatically terminate your rights under this License. However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, receipt of a copy of some or all of the same material does not give you any rights to use it. 10. FUTURE REVISIONS OF THIS LICENSE The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See `http://www.gnu.org/copyleft/'. Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License "or any later version" applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation. If the Document specifies that a proxy can decide which future versions of this License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Document. 11. RELICENSING "Massive Multiauthor Collaboration Site" (or "MMC Site") means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A "Massive Multiauthor Collaboration" (or "MMC") contained in the site means any set of copyrightable works thus published on the MMC site. "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0 license published by Creative Commons Corporation, a not-for-profit corporation with a principal place of business in San Francisco, California, as well as future copyleft versions of that license published by that same organization. "Incorporate" means to publish or republish a Document, in whole or in part, as part of another Document. An MMC is "eligible for relicensing" if it is licensed under this License, and if all works that were first published under this License somewhere other than this MMC, and subsequently incorporated in whole or in part into the MMC, (1) had no cover texts or invariant sections, and (2) were thus incorporated prior to November 1, 2008. The operator of an MMC Site may republish an MMC contained in the site under CC-BY-SA on the same site at any time before August 1, 2009, provided the MMC is eligible for relicensing. ADDENDUM: How to use this License for your documents ==================================================== To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page: Copyright (C) YEAR YOUR NAME. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled ``GNU Free Documentation License''. If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the "with...Texts." line with this: with the Invariant Sections being LIST THEIR TITLES, with the Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. If you have Invariant Sections without Cover Texts, or some other combination of the three, merge those two alternatives to suit the situation. If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software.  File: autoconf.info, Node: Indices, Prev: GNU Free Documentation License, Up: Top Appendix B Indices ****************** * Menu: * Environment Variable Index:: Index of environment variables used * Output Variable Index:: Index of variables set in output files * Preprocessor Symbol Index:: Index of C preprocessor symbols defined * Cache Variable Index:: Index of documented cache variables * Autoconf Macro Index:: Index of Autoconf macros * M4 Macro Index:: Index of M4, M4sugar, and M4sh macros * Autotest Macro Index:: Index of Autotest macros * Program & Function Index:: Index of those with portability problems * Concept Index:: General index  File: autoconf.info, Node: Environment Variable Index, Next: Output Variable Index, Up: Indices B.1 Environment Variable Index ============================== This is an alphabetical list of the environment variables that might influence Autoconf checks. [index] * Menu: * _: Special Shell Variables. (line 36) * BIN_SH: Special Shell Variables. (line 40) * CC: C Compiler. (line 61) * CDPATH: Special Shell Variables. (line 44) * CFLAGS <1>: C Compiler. (line 61) * CFLAGS: Preset Output Variables. (line 23) * CLICOLOR_FORCE: Special Shell Variables. (line 67) * CONFIG_COMMANDS: Obsolete config.status Use. (line 11) * CONFIG_FILES: Obsolete config.status Use. (line 15) * CONFIG_HEADERS: Obsolete config.status Use. (line 20) * CONFIG_LINKS: Obsolete config.status Use. (line 25) * CONFIG_SHELL: config.status Invocation. (line 102) * CONFIG_SITE: Site Defaults. (line 10) * CONFIG_STATUS: config.status Invocation. (line 108) * CPP: C Compiler. (line 113) * CPPFLAGS: Preset Output Variables. (line 72) * CXX: C++ Compiler. (line 7) * CXXCPP: C++ Compiler. (line 35) * CXXFLAGS <1>: C++ Compiler. (line 7) * CXXFLAGS: Preset Output Variables. (line 94) * CYGWIN: Obsolete Macros. (line 124) * DUALCASE: Special Shell Variables. (line 74) * ENV: Special Shell Variables. (line 84) * ERL: Erlang Compiler and Interpreter. (line 29) * ERLC: Erlang Compiler and Interpreter. (line 10) * ERLCFLAGS <1>: Erlang Compiler and Interpreter. (line 10) * ERLCFLAGS: Preset Output Variables. (line 120) * F77: Fortran Compiler. (line 19) * FC: Fortran Compiler. (line 44) * FCFLAGS <1>: Fortran Compiler. (line 44) * FCFLAGS: Preset Output Variables. (line 126) * FFLAGS <1>: Fortran Compiler. (line 19) * FFLAGS: Preset Output Variables. (line 133) * FPATH: Special Shell Variables. (line 101) * GOFLAGS: Preset Output Variables. (line 170) * GREP_OPTIONS: Special Shell Variables. (line 108) * IFS: Special Shell Variables. (line 116) * LANG: Special Shell Variables. (line 160) * LANGUAGE: Special Shell Variables. (line 167) * LC_ADDRESS: Special Shell Variables. (line 177) * LC_ALL <1>: Special Shell Variables. (line 160) * LC_ALL: Initialization Macros. (line 14) * LC_COLLATE: Special Shell Variables. (line 160) * LC_CTYPE: Special Shell Variables. (line 160) * LC_IDENTIFICATION: Special Shell Variables. (line 177) * LC_MEASUREMENT: Special Shell Variables. (line 177) * LC_MESSAGES: Special Shell Variables. (line 160) * LC_MONETARY: Special Shell Variables. (line 160) * LC_NAME: Special Shell Variables. (line 177) * LC_NUMERIC: Special Shell Variables. (line 160) * LC_PAPER: Special Shell Variables. (line 177) * LC_TELEPHONE: Special Shell Variables. (line 177) * LC_TIME: Special Shell Variables. (line 160) * LDFLAGS: Preset Output Variables. (line 140) * LIBS: Preset Output Variables. (line 154) * LINENO <1>: Special Shell Variables. (line 182) * LINENO: Initialization Macros. (line 67) * M4: autom4te Invocation. (line 10) * MAIL: Special Shell Variables. (line 84) * MAILPATH: Special Shell Variables. (line 84) * NULLCMD: Special Shell Variables. (line 311) * OBJC: Objective C Compiler. (line 7) * OBJCFLAGS <1>: Objective C Compiler. (line 7) * OBJCFLAGS: Preset Output Variables. (line 162) * OBJCPP: Objective C Compiler. (line 26) * OBJCXX: Objective C++ Compiler. (line 7) * OBJCXXCPP: Objective C++ Compiler. (line 27) * OBJCXXFLAGS <1>: Objective C++ Compiler. (line 7) * OBJCXXFLAGS: Preset Output Variables. (line 166) * options: Special Shell Variables. (line 318) * PATH_SEPARATOR: Special Shell Variables. (line 322) * POSIXLY_CORRECT: Special Shell Variables. (line 331) * PS1: Special Shell Variables. (line 84) * PS2: Special Shell Variables. (line 84) * PS4: Special Shell Variables. (line 84) * PWD: Special Shell Variables. (line 346) * RANDOM: Special Shell Variables. (line 355) * SHELL: Initialization Macros. (line 14) * SIMPLE_BACKUP_SUFFIX: autoupdate Invocation. (line 16) * status: Special Shell Variables. (line 363) * TMPDIR: Initialization Macros. (line 77) * WARNINGS <1>: autom4te Invocation. (line 58) * WARNINGS <2>: autoheader Invocation. (line 83) * WARNINGS <3>: autoreconf Invocation. (line 97) * WARNINGS: autoconf Invocation. (line 62) * XMKMF: System Services. (line 10) * YACC: Particular Programs. (line 200) * YFLAGS: Particular Programs. (line 200)  File: autoconf.info, Node: Output Variable Index, Next: Preprocessor Symbol Index, Prev: Environment Variable Index, Up: Indices B.2 Output Variable Index ========================= This is an alphabetical list of the variables that Autoconf can substitute into files that it creates, typically one or more makefiles. *Note Setting Output Variables::, for more information on how this is done. [index] * Menu: * abs_builddir: Preset Output Variables. (line 177) * abs_srcdir: Preset Output Variables. (line 199) * abs_top_builddir: Preset Output Variables. (line 192) * abs_top_srcdir: Preset Output Variables. (line 206) * ac_empty: Fortran Compiler. (line 465) * ALLOCA: Particular Functions. (line 10) * AWK: Particular Programs. (line 10) * bindir: Installation Directory Variables. (line 15) * build: Canonicalizing. (line 26) * build_alias: Canonicalizing. (line 9) * build_cpu: Canonicalizing. (line 26) * build_os: Canonicalizing. (line 26) * build_vendor: Canonicalizing. (line 26) * builddir: Preset Output Variables. (line 174) * CC <1>: System Services. (line 49) * CC: C Compiler. (line 61) * CFLAGS <1>: C Compiler. (line 61) * CFLAGS: Preset Output Variables. (line 23) * configure_input: Preset Output Variables. (line 58) * CPP: C Compiler. (line 113) * CPPFLAGS: Preset Output Variables. (line 72) * cross_compiling: Runtime. (line 71) * CXX: C++ Compiler. (line 7) * CXXCPP: C++ Compiler. (line 35) * CXXFLAGS <1>: C++ Compiler. (line 7) * CXXFLAGS: Preset Output Variables. (line 94) * datadir: Installation Directory Variables. (line 18) * datarootdir: Installation Directory Variables. (line 22) * DEFS: Preset Output Variables. (line 98) * docdir: Installation Directory Variables. (line 26) * dvidir: Installation Directory Variables. (line 30) * ECHO_C: Preset Output Variables. (line 108) * ECHO_N: Preset Output Variables. (line 108) * ECHO_T: Preset Output Variables. (line 108) * EGREP: Particular Programs. (line 29) * ERL <1>: Running the Compiler. (line 30) * ERL <2>: Language Choice. (line 40) * ERL: Erlang Compiler and Interpreter. (line 29) * ERLANG_ERTS_VER: Erlang Libraries. (line 12) * ERLANG_INSTALL_LIB_DIR <1>: Erlang Libraries. (line 86) * ERLANG_INSTALL_LIB_DIR: Installation Directory Variables. (line 201) * ERLANG_INSTALL_LIB_DIR_LIBRARY <1>: Erlang Libraries. (line 93) * ERLANG_INSTALL_LIB_DIR_LIBRARY: Installation Directory Variables. (line 206) * ERLANG_LIB_DIR: Erlang Libraries. (line 28) * ERLANG_LIB_DIR_LIBRARY: Erlang Libraries. (line 36) * ERLANG_LIB_VER_LIBRARY: Erlang Libraries. (line 36) * ERLANG_ROOT_DIR: Erlang Libraries. (line 22) * ERLC <1>: Language Choice. (line 40) * ERLC: Erlang Compiler and Interpreter. (line 10) * ERLCFLAGS <1>: Language Choice. (line 40) * ERLCFLAGS <2>: Erlang Compiler and Interpreter. (line 10) * ERLCFLAGS: Preset Output Variables. (line 120) * exec_prefix: Installation Directory Variables. (line 33) * EXEEXT <1>: Obsolete Macros. (line 178) * EXEEXT: Compilers and Preprocessors. (line 6) * F77: Fortran Compiler. (line 19) * FC: Fortran Compiler. (line 44) * FC_MODEXT: Fortran Compiler. (line 438) * FC_MODINC: Fortran Compiler. (line 465) * FC_MODOUT: Fortran Compiler. (line 501) * FCFLAGS <1>: Fortran Compiler. (line 44) * FCFLAGS: Preset Output Variables. (line 126) * FCLIBS: Fortran Compiler. (line 92) * FFLAGS <1>: Fortran Compiler. (line 19) * FFLAGS: Preset Output Variables. (line 133) * FGREP: Particular Programs. (line 36) * FLIBS: Fortran Compiler. (line 92) * GETGROUPS_LIBS: Particular Functions. (line 155) * GETLOADAVG_LIBS: Particular Functions. (line 161) * GOFLAGS: Preset Output Variables. (line 170) * GREP: Particular Programs. (line 20) * host: Canonicalizing. (line 34) * host_alias: Canonicalizing. (line 9) * host_cpu: Canonicalizing. (line 34) * host_os: Canonicalizing. (line 34) * host_vendor: Canonicalizing. (line 34) * htmldir: Installation Directory Variables. (line 40) * includedir: Installation Directory Variables. (line 43) * infodir: Installation Directory Variables. (line 46) * INSTALL: Particular Programs. (line 43) * INSTALL_DATA: Particular Programs. (line 43) * INSTALL_PROGRAM: Particular Programs. (line 43) * INSTALL_SCRIPT: Particular Programs. (line 43) * KMEM_GROUP: Particular Functions. (line 161) * LDFLAGS: Preset Output Variables. (line 140) * LEX: Particular Programs. (line 114) * LEX_OUTPUT_ROOT: Particular Programs. (line 114) * LEXLIB: Particular Programs. (line 114) * libdir: Installation Directory Variables. (line 49) * libexecdir: Installation Directory Variables. (line 52) * LIBOBJDIR: AC_LIBOBJ vs LIBOBJS. (line 35) * LIBOBJS <1>: Particular Structures. (line 26) * LIBOBJS <2>: Generic Functions. (line 56) * LIBOBJS: Particular Functions. (line 161) * LIBS <1>: Obsolete Macros. (line 295) * LIBS: Preset Output Variables. (line 154) * LN_S: Particular Programs. (line 168) * localedir: Installation Directory Variables. (line 55) * localstatedir: Installation Directory Variables. (line 60) * mandir: Installation Directory Variables. (line 63) * MKDIR_P: Particular Programs. (line 80) * NEED_SETGID: Particular Functions. (line 161) * OBJC: Objective C Compiler. (line 7) * OBJCFLAGS <1>: Objective C Compiler. (line 7) * OBJCFLAGS: Preset Output Variables. (line 162) * OBJCPP: Objective C Compiler. (line 26) * OBJCXX: Objective C++ Compiler. (line 7) * OBJCXXCPP: Objective C++ Compiler. (line 27) * OBJCXXFLAGS <1>: Objective C++ Compiler. (line 7) * OBJCXXFLAGS: Preset Output Variables. (line 166) * OBJEXT <1>: Obsolete Macros. (line 384) * OBJEXT: Compilers and Preprocessors. (line 11) * oldincludedir: Installation Directory Variables. (line 66) * OPENMP_CFLAGS: Generic Compiler Characteristics. (line 64) * OPENMP_CXXFLAGS: Generic Compiler Characteristics. (line 64) * OPENMP_FCFLAGS: Generic Compiler Characteristics. (line 64) * OPENMP_FFLAGS: Generic Compiler Characteristics. (line 64) * PACKAGE_BUGREPORT: Initializing configure. (line 57) * PACKAGE_NAME: Initializing configure. (line 45) * PACKAGE_STRING: Initializing configure. (line 54) * PACKAGE_TARNAME: Initializing configure. (line 48) * PACKAGE_URL: Initializing configure. (line 61) * PACKAGE_VERSION: Initializing configure. (line 51) * pdfdir: Installation Directory Variables. (line 69) * POW_LIB: Particular Functions. (line 408) * prefix: Installation Directory Variables. (line 72) * program_transform_name: Transforming Names. (line 11) * psdir: Installation Directory Variables. (line 77) * RANLIB: Particular Programs. (line 187) * sbindir: Installation Directory Variables. (line 80) * SED: Particular Programs. (line 191) * SET_MAKE: Output. (line 45) * sharedstatedir: Installation Directory Variables. (line 84) * srcdir: Preset Output Variables. (line 195) * subdirs: Subdirectories. (line 12) * sysconfdir: Installation Directory Variables. (line 88) * target: Canonicalizing. (line 41) * target_alias: Canonicalizing. (line 9) * target_cpu: Canonicalizing. (line 41) * target_os: Canonicalizing. (line 41) * target_vendor: Canonicalizing. (line 41) * tmp: Initialization Macros. (line 77) * top_build_prefix: Preset Output Variables. (line 184) * top_builddir: Preset Output Variables. (line 180) * top_srcdir: Preset Output Variables. (line 202) * X_CFLAGS: System Services. (line 30) * X_EXTRA_LIBS: System Services. (line 30) * X_LIBS: System Services. (line 30) * X_PRE_LIBS: System Services. (line 30) * YACC: Particular Programs. (line 200)  File: autoconf.info, Node: Preprocessor Symbol Index, Next: Cache Variable Index, Prev: Output Variable Index, Up: Indices B.3 Preprocessor Symbol Index ============================= This is an alphabetical list of the C preprocessor symbols that the Autoconf macros define. To work with Autoconf, C source code needs to use these names in `#if' or `#ifdef' directives. [index] * Menu: * __CHAR_UNSIGNED__: C Compiler. (line 291) * __EXTENSIONS__: Posix Variants. (line 10) * __PROTOTYPES: C Compiler. (line 351) * _ALL_SOURCE <1>: Obsolete Macros. (line 20) * _ALL_SOURCE: Posix Variants. (line 10) * _FILE_OFFSET_BITS: System Services. (line 49) * _GNU_SOURCE <1>: Obsolete Macros. (line 234) * _GNU_SOURCE: Posix Variants. (line 10) * _LARGE_FILES: System Services. (line 49) * _LARGEFILE_SOURCE: Particular Functions. (line 147) * _MINIX <1>: Obsolete Macros. (line 371) * _MINIX: Posix Variants. (line 10) * _OPENMP: Generic Compiler Characteristics. (line 64) * _POSIX_1_SOURCE <1>: Obsolete Macros. (line 371) * _POSIX_1_SOURCE: Posix Variants. (line 10) * _POSIX_PTHREAD_SEMANTICS: Posix Variants. (line 10) * _POSIX_SOURCE <1>: Obsolete Macros. (line 371) * _POSIX_SOURCE: Posix Variants. (line 10) * _POSIX_VERSION: Particular Headers. (line 228) * _TANDEM_SOURCE: Posix Variants. (line 10) * ALIGNOF_TYPE: Generic Compiler Characteristics. (line 30) * C_ALLOCA: Particular Functions. (line 10) * C_GETLOADAVG: Particular Functions. (line 161) * CLOSEDIR_VOID: Particular Functions. (line 69) * const: C Compiler. (line 217) * CXX_NO_MINUS_C_MINUS_O: C++ Compiler. (line 48) * DGUX: Particular Functions. (line 161) * DIRENT: Obsolete Macros. (line 158) * F77_DUMMY_MAIN: Fortran Compiler. (line 130) * F77_FUNC: Fortran Compiler. (line 202) * F77_FUNC_: Fortran Compiler. (line 202) * F77_MAIN: Fortran Compiler. (line 176) * F77_NO_MINUS_C_MINUS_O: Fortran Compiler. (line 76) * FC_DUMMY_MAIN: Fortran Compiler. (line 130) * FC_FUNC: Fortran Compiler. (line 202) * FC_FUNC_: Fortran Compiler. (line 202) * FC_MAIN: Fortran Compiler. (line 176) * FC_NO_MINUS_C_MINUS_O: Fortran Compiler. (line 76) * FLEXIBLE_ARRAY_MEMBER: C Compiler. (line 315) * GETGROUPS_T: Particular Types. (line 14) * GETLOADAVG_PRIVILEGED: Particular Functions. (line 161) * GETPGRP_VOID: Particular Functions. (line 205) * gid_t: Particular Types. (line 126) * GWINSZ_IN_SYS_IOCTL: Particular Headers. (line 270) * HAVE__BOOL: Particular Headers. (line 10) * HAVE_AGGREGATE_MEMBER: Generic Structures. (line 29) * HAVE_ALLOCA_H: Particular Functions. (line 10) * HAVE_C_BACKSLASH_A: C Compiler. (line 176) * HAVE_C_VARARRAYS: C Compiler. (line 339) * HAVE_CHOWN: Particular Functions. (line 63) * HAVE_CONFIG_H: Configuration Headers. (line 33) * HAVE_DECL_STRERROR_R: Particular Functions. (line 388) * HAVE_DECL_SYMBOL: Generic Declarations. (line 34) * HAVE_DECL_TZNAME: Particular Structures. (line 43) * HAVE_DIRENT_H: Particular Headers. (line 25) * HAVE_DOPRNT: Particular Functions. (line 443) * HAVE_FSEEKO: Particular Functions. (line 147) * HAVE_FUNCTION: Generic Functions. (line 27) * HAVE_GETGROUPS: Particular Functions. (line 155) * HAVE_GETMNTENT: Particular Functions. (line 195) * HAVE_HEADER: Generic Headers. (line 46) * HAVE_INT16_T: Particular Types. (line 40) * HAVE_INT32_T: Particular Types. (line 43) * HAVE_INT64_T: Particular Types. (line 46) * HAVE_INT8_T: Particular Types. (line 21) * HAVE_INTMAX_T: Particular Types. (line 49) * HAVE_INTPTR_T: Particular Types. (line 54) * HAVE_LONG_DOUBLE <1>: Obsolete Macros. (line 33) * HAVE_LONG_DOUBLE: Particular Types. (line 59) * HAVE_LONG_DOUBLE_WIDER: Particular Types. (line 70) * HAVE_LONG_FILE_NAMES: System Services. (line 71) * HAVE_LONG_LONG_INT: Particular Types. (line 78) * HAVE_LSTAT_EMPTY_STRING_BUG: Particular Functions. (line 363) * HAVE_MALLOC: Particular Functions. (line 247) * HAVE_MBRTOWC: Particular Functions. (line 279) * HAVE_MMAP: Particular Functions. (line 311) * HAVE_NDIR_H: Particular Headers. (line 25) * HAVE_NLIST_H: Particular Functions. (line 161) * HAVE_OBSTACK: Particular Functions. (line 319) * HAVE_REALLOC: Particular Functions. (line 326) * HAVE_RESOLV_H: Particular Headers. (line 73) * HAVE_RESTARTABLE_SYSCALLS: Obsolete Macros. (line 548) * HAVE_ST_BLKSIZE: Obsolete Macros. (line 521) * HAVE_ST_BLOCKS: Particular Structures. (line 26) * HAVE_ST_RDEV: Obsolete Macros. (line 530) * HAVE_STAT_EMPTY_STRING_BUG: Particular Functions. (line 363) * HAVE_STDBOOL_H: Particular Headers. (line 101) * HAVE_STRCOLL: Particular Functions. (line 379) * HAVE_STRERROR_R: Particular Functions. (line 388) * HAVE_STRFTIME: Particular Functions. (line 401) * HAVE_STRINGIZE: C Compiler. (line 305) * HAVE_STRNLEN: Particular Functions. (line 426) * HAVE_STRTOLD: Particular Functions. (line 420) * HAVE_STRUCT_DIRENT_D_INO: Particular Structures. (line 9) * HAVE_STRUCT_DIRENT_D_TYPE: Particular Structures. (line 21) * HAVE_STRUCT_STAT_ST_BLKSIZE: Obsolete Macros. (line 521) * HAVE_STRUCT_STAT_ST_BLOCKS: Particular Structures. (line 26) * HAVE_STRUCT_STAT_ST_RDEV: Obsolete Macros. (line 530) * HAVE_STRUCT_TM_TM_ZONE: Particular Structures. (line 43) * HAVE_SYS_DIR_H: Particular Headers. (line 25) * HAVE_SYS_NDIR_H: Particular Headers. (line 25) * HAVE_SYS_WAIT_H: Particular Headers. (line 204) * HAVE_TM_ZONE: Particular Structures. (line 43) * HAVE_TYPE: Generic Types. (line 28) * HAVE_TYPEOF: C Compiler. (line 345) * HAVE_TZNAME: Particular Structures. (line 43) * HAVE_UINT16_T: Particular Types. (line 138) * HAVE_UINT32_T: Particular Types. (line 141) * HAVE_UINT64_T: Particular Types. (line 144) * HAVE_UINT8_T: Particular Types. (line 132) * HAVE_UINTMAX_T: Particular Types. (line 147) * HAVE_UINTPTR_T: Particular Types. (line 152) * HAVE_UNSIGNED_LONG_LONG_INT: Particular Types. (line 157) * HAVE_UTIME_NULL: Particular Functions. (line 433) * HAVE_VFORK_H: Particular Functions. (line 120) * HAVE_VPRINTF: Particular Functions. (line 443) * HAVE_WAIT3: Obsolete Macros. (line 216) * HAVE_WORKING_FORK: Particular Functions. (line 120) * HAVE_WORKING_VFORK: Particular Functions. (line 120) * inline: C Compiler. (line 286) * int16_t: Particular Types. (line 40) * int32_t: Particular Types. (line 43) * int64_t: Particular Types. (line 46) * int8_t: Particular Types. (line 21) * INT_16_BITS: Obsolete Macros. (line 275) * intmax_t: Particular Types. (line 49) * intptr_t: Particular Types. (line 54) * LONG_64_BITS: Obsolete Macros. (line 337) * LSTAT_FOLLOWS_SLASHED_SYMLINK: Particular Functions. (line 228) * MAJOR_IN_MKDEV: Particular Headers. (line 68) * MAJOR_IN_SYSMACROS: Particular Headers. (line 68) * malloc: Particular Functions. (line 247) * mbstate_t: Particular Types. (line 88) * mode_t: Particular Types. (line 96) * NDEBUG: Particular Headers. (line 20) * NDIR: Obsolete Macros. (line 158) * NEED_MEMORY_H: Obsolete Macros. (line 358) * NEED_SETGID: Particular Functions. (line 161) * NLIST_NAME_UNION: Particular Functions. (line 161) * NO_MINUS_C_MINUS_O: C Compiler. (line 102) * off_t: Particular Types. (line 102) * PACKAGE_BUGREPORT: Initializing configure. (line 57) * PACKAGE_NAME: Initializing configure. (line 45) * PACKAGE_STRING: Initializing configure. (line 54) * PACKAGE_TARNAME: Initializing configure. (line 48) * PACKAGE_URL: Initializing configure. (line 61) * PACKAGE_VERSION: Initializing configure. (line 51) * PARAMS: C Compiler. (line 351) * pid_t: Particular Types. (line 108) * PROTOTYPES: C Compiler. (line 351) * realloc: Particular Functions. (line 326) * restrict: C Compiler. (line 247) * RETSIGTYPE: Obsolete Macros. (line 662) * SELECT_TYPE_ARG1: Particular Functions. (line 337) * SELECT_TYPE_ARG234: Particular Functions. (line 337) * SELECT_TYPE_ARG5: Particular Functions. (line 337) * SETPGRP_VOID: Particular Functions. (line 348) * SETVBUF_REVERSED: Obsolete Macros. (line 208) * size_t: Particular Types. (line 114) * SIZEOF_TYPE-OR-EXPR: Generic Compiler Characteristics. (line 8) * ssize_t: Particular Types. (line 120) * STAT_MACROS_BROKEN: Particular Headers. (line 92) * STDC_HEADERS: Particular Headers. (line 135) * STRERROR_R_CHAR_P: Particular Functions. (line 388) * SVR4: Particular Functions. (line 161) * SYS_SIGLIST_DECLARED: Obsolete Macros. (line 141) * SYSDIR: Obsolete Macros. (line 158) * SYSNDIR: Obsolete Macros. (line 158) * TIME_WITH_SYS_TIME: Particular Headers. (line 244) * TM_IN_SYS_TIME: Particular Structures. (line 35) * typeof: C Compiler. (line 345) * uid_t: Particular Types. (line 126) * uint16_t: Particular Types. (line 138) * uint32_t: Particular Types. (line 141) * uint64_t: Particular Types. (line 144) * uint8_t: Particular Types. (line 132) * uintmax_t: Particular Types. (line 147) * uintptr_t: Particular Types. (line 152) * UMAX: Particular Functions. (line 161) * UMAX4_3: Particular Functions. (line 161) * USG: Obsolete Macros. (line 685) * VARIABLE: Defining Symbols. (line 32) * vfork: Particular Functions. (line 120) * volatile: C Compiler. (line 265) * WORDS_BIGENDIAN: C Compiler. (line 184) * X_DISPLAY_MISSING: System Services. (line 30) * YYTEXT_POINTER: Particular Programs. (line 114)  File: autoconf.info, Node: Cache Variable Index, Next: Autoconf Macro Index, Prev: Preprocessor Symbol Index, Up: Indices B.4 Cache Variable Index ======================== This is an alphabetical list of documented cache variables used by macros defined in Autoconf. Autoconf macros may use additional cache variables internally. [index] * Menu: * ac_cv_alignof_TYPE-OR-EXPR: Generic Compiler Characteristics. (line 30) * ac_cv_c_const: C Compiler. (line 217) * ac_cv_c_int16_t: Particular Types. (line 40) * ac_cv_c_int32_t: Particular Types. (line 43) * ac_cv_c_int64_t: Particular Types. (line 46) * ac_cv_c_int8_t: Particular Types. (line 21) * ac_cv_c_restrict: C Compiler. (line 247) * ac_cv_c_uint16_t: Particular Types. (line 138) * ac_cv_c_uint32_t: Particular Types. (line 141) * ac_cv_c_uint64_t: Particular Types. (line 144) * ac_cv_c_uint8_t: Particular Types. (line 132) * ac_cv_f77_compiler_gnu: Fortran Compiler. (line 19) * ac_cv_f77_dummy_main: Fortran Compiler. (line 130) * ac_cv_f77_implicit_none: Fortran Compiler. (line 427) * ac_cv_f77_libs: Fortran Compiler. (line 92) * ac_cv_f77_main: Fortran Compiler. (line 176) * ac_cv_f77_mangling: Fortran Compiler. (line 202) * ac_cv_fc_check_bounds: Fortran Compiler. (line 413) * ac_cv_fc_compiler_gnu: Fortran Compiler. (line 44) * ac_cv_fc_dummy_main: Fortran Compiler. (line 130) * ac_cv_fc_fixedform: Fortran Compiler. (line 375) * ac_cv_fc_freeform: Fortran Compiler. (line 351) * ac_cv_fc_implicit_none: Fortran Compiler. (line 427) * ac_cv_fc_libs: Fortran Compiler. (line 92) * ac_cv_fc_line_length: Fortran Compiler. (line 396) * ac_cv_fc_main: Fortran Compiler. (line 176) * ac_cv_fc_mangling: Fortran Compiler. (line 202) * ac_cv_fc_module_ext: Fortran Compiler. (line 438) * ac_cv_fc_module_flag: Fortran Compiler. (line 465) * ac_cv_fc_module_output_flag: Fortran Compiler. (line 501) * ac_cv_fc_pp_define: Fortran Compiler. (line 336) * ac_cv_fc_pp_srcext_EXT: Fortran Compiler. (line 279) * ac_cv_fc_srcext_EXT: Fortran Compiler. (line 279) * ac_cv_file_FILE: Files. (line 13) * ac_cv_func_chown_works: Particular Functions. (line 63) * ac_cv_func_closedir_void: Particular Functions. (line 69) * ac_cv_func_fnmatch_gnu: Particular Functions. (line 109) * ac_cv_func_fnmatch_works: Particular Functions. (line 94) * ac_cv_func_FUNCTION: Generic Functions. (line 15) * ac_cv_func_getgroups_works: Particular Functions. (line 155) * ac_cv_func_getpgrp_void: Particular Functions. (line 205) * ac_cv_func_lstat_dereferences_slashed_symlink: Particular Functions. (line 228) * ac_cv_func_lstat_empty_string_bug: Particular Functions. (line 363) * ac_cv_func_malloc_0_nonnull: Particular Functions. (line 247) * ac_cv_func_mbrtowc: Particular Functions. (line 279) * ac_cv_func_memcmp_working: Particular Functions. (line 286) * ac_cv_func_mmap_fixed_mapped: Particular Functions. (line 311) * ac_cv_func_obstack: Particular Functions. (line 319) * ac_cv_func_pow: Particular Functions. (line 408) * ac_cv_func_realloc_0_nonnull: Particular Functions. (line 326) * ac_cv_func_setpgrp_void: Particular Functions. (line 348) * ac_cv_func_stat_empty_string_bug: Particular Functions. (line 363) * ac_cv_func_strcoll_works: Particular Functions. (line 379) * ac_cv_func_strerror_r_char_p: Particular Functions. (line 388) * ac_cv_func_strnlen_working: Particular Functions. (line 426) * ac_cv_func_strtod: Particular Functions. (line 408) * ac_cv_func_strtold: Particular Functions. (line 420) * ac_cv_func_utime_null: Particular Functions. (line 433) * ac_cv_func_working_mktime: Particular Functions. (line 299) * ac_cv_have_decl_SYMBOL: Generic Declarations. (line 11) * ac_cv_header_HEADER-FILE: Generic Headers. (line 13) * ac_cv_header_stdbool_h: Particular Headers. (line 10) * ac_cv_header_stdc: Particular Headers. (line 135) * ac_cv_header_sys_wait_h: Particular Headers. (line 204) * ac_cv_header_time: Particular Headers. (line 244) * ac_cv_lib_error_at_line: Particular Functions. (line 84) * ac_cv_lib_LIBRARY_FUNCTION: Libraries. (line 11) * ac_cv_member_AGGREGATE_MEMBER: Generic Structures. (line 11) * ac_cv_member_struct_stat_st_blocks: Particular Structures. (line 26) * ac_cv_path_install: Particular Programs. (line 43) * ac_cv_path_mkdir: Particular Programs. (line 80) * ac_cv_path_SED: Particular Programs. (line 191) * ac_cv_path_VARIABLE: Generic Programs. (line 108) * ac_cv_prog_AWK: Particular Programs. (line 10) * ac_cv_prog_c_openmp: Generic Compiler Characteristics. (line 64) * ac_cv_prog_cc_c89: C Compiler. (line 61) * ac_cv_prog_cc_c99: C Compiler. (line 161) * ac_cv_prog_cc_COMPILER_c_o: C Compiler. (line 102) * ac_cv_prog_cc_stdc: C Compiler. (line 137) * ac_cv_prog_cxx_openmp: Generic Compiler Characteristics. (line 64) * ac_cv_prog_EGREP: Particular Programs. (line 29) * ac_cv_prog_f77_c_o: Fortran Compiler. (line 76) * ac_cv_prog_f77_g: Fortran Compiler. (line 19) * ac_cv_prog_f77_openmp: Generic Compiler Characteristics. (line 64) * ac_cv_prog_f77_v: Fortran Compiler. (line 92) * ac_cv_prog_fc_c_o: Fortran Compiler. (line 76) * ac_cv_prog_fc_g: Fortran Compiler. (line 44) * ac_cv_prog_fc_openmp: Generic Compiler Characteristics. (line 64) * ac_cv_prog_fc_v: Fortran Compiler. (line 92) * ac_cv_prog_FGREP: Particular Programs. (line 36) * ac_cv_prog_GREP: Particular Programs. (line 20) * ac_cv_prog_LEX: Particular Programs. (line 114) * ac_cv_prog_VARIABLE: Generic Programs. (line 24) * ac_cv_prog_YACC: Particular Programs. (line 200) * ac_cv_search_FUNCTION: Libraries. (line 52) * ac_cv_search_getmntent: Particular Functions. (line 195) * ac_cv_sizeof_TYPE-OR-EXPR: Generic Compiler Characteristics. (line 8) * ac_cv_sys_posix_termios: System Services. (line 75) * ac_cv_type_getgroups: Particular Types. (line 14) * ac_cv_type_long_double: Particular Types. (line 59) * ac_cv_type_long_double_wider: Particular Types. (line 70) * ac_cv_type_long_long_int: Particular Types. (line 78) * ac_cv_type_mbstate_t: Particular Types. (line 88) * ac_cv_type_mode_t: Particular Types. (line 96) * ac_cv_type_off_t: Particular Types. (line 102) * ac_cv_type_pid_t: Particular Types. (line 108) * ac_cv_type_size_t: Particular Types. (line 114) * ac_cv_type_ssize_t: Particular Types. (line 120) * ac_cv_type_TYPE: Generic Types. (line 11) * ac_cv_type_uid_t: Particular Types. (line 126) * ac_cv_type_unsigned_long_long_int: Particular Types. (line 157)  File: autoconf.info, Node: Autoconf Macro Index, Next: M4 Macro Index, Prev: Cache Variable Index, Up: Indices B.5 Autoconf Macro Index ======================== This is an alphabetical list of the Autoconf macros. [index] * Menu: * AC_ACT_IFELSE: AC_ACT_IFELSE vs AC_TRY_ACT. (line 6) * AC_AIX: Obsolete Macros. (line 20) * AC_ALLOCA: Obsolete Macros. (line 24) * AC_ARG_ARRAY: Obsolete Macros. (line 27) * AC_ARG_ENABLE: Package Options. (line 35) * AC_ARG_PROGRAM: Transforming Names. (line 11) * AC_ARG_VAR: Setting Output Variables. (line 79) * AC_ARG_WITH: External Software. (line 36) * AC_AUTOCONF_VERSION: Versioning. (line 21) * AC_BEFORE: Suggested Ordering. (line 28) * AC_C_BACKSLASH_A: C Compiler. (line 176) * AC_C_BIGENDIAN: C Compiler. (line 184) * AC_C_CHAR_UNSIGNED: C Compiler. (line 291) * AC_C_CONST: C Compiler. (line 217) * AC_C_CROSS: Obsolete Macros. (line 30) * AC_C_FLEXIBLE_ARRAY_MEMBER: C Compiler. (line 315) * AC_C_INLINE: C Compiler. (line 286) * AC_C_LONG_DOUBLE: Obsolete Macros. (line 33) * AC_C_PROTOTYPES: C Compiler. (line 351) * AC_C_RESTRICT: C Compiler. (line 247) * AC_C_STRINGIZE: C Compiler. (line 305) * AC_C_TYPEOF: C Compiler. (line 345) * AC_C_VARARRAYS: C Compiler. (line 339) * AC_C_VOLATILE: C Compiler. (line 265) * AC_CACHE_CHECK: Caching Results. (line 30) * AC_CACHE_LOAD: Cache Checkpointing. (line 13) * AC_CACHE_SAVE: Cache Checkpointing. (line 17) * AC_CACHE_VAL: Caching Results. (line 16) * AC_CANONICAL_BUILD: Canonicalizing. (line 26) * AC_CANONICAL_HOST: Canonicalizing. (line 34) * AC_CANONICAL_SYSTEM: Obsolete Macros. (line 41) * AC_CANONICAL_TARGET: Canonicalizing. (line 41) * AC_CHAR_UNSIGNED: Obsolete Macros. (line 51) * AC_CHECK_ALIGNOF: Generic Compiler Characteristics. (line 30) * AC_CHECK_DECL: Generic Declarations. (line 11) * AC_CHECK_DECLS: Generic Declarations. (line 34) * AC_CHECK_DECLS_ONCE: Generic Declarations. (line 79) * AC_CHECK_FILE: Files. (line 13) * AC_CHECK_FILES: Files. (line 21) * AC_CHECK_FUNC: Generic Functions. (line 15) * AC_CHECK_FUNCS: Generic Functions. (line 27) * AC_CHECK_FUNCS_ONCE: Generic Functions. (line 38) * AC_CHECK_HEADER: Generic Headers. (line 13) * AC_CHECK_HEADER_STDBOOL: Particular Headers. (line 10) * AC_CHECK_HEADERS: Generic Headers. (line 46) * AC_CHECK_HEADERS_ONCE: Generic Headers. (line 87) * AC_CHECK_LIB: Libraries. (line 11) * AC_CHECK_MEMBER: Generic Structures. (line 11) * AC_CHECK_MEMBERS: Generic Structures. (line 29) * AC_CHECK_PROG: Generic Programs. (line 24) * AC_CHECK_PROGS: Generic Programs. (line 36) * AC_CHECK_SIZEOF: Generic Compiler Characteristics. (line 8) * AC_CHECK_TARGET_TOOL: Generic Programs. (line 48) * AC_CHECK_TARGET_TOOLS: Generic Programs. (line 79) * AC_CHECK_TOOL: Generic Programs. (line 64) * AC_CHECK_TOOLS: Generic Programs. (line 92) * AC_CHECK_TYPE <1>: Obsolete Macros. (line 54) * AC_CHECK_TYPE: Generic Types. (line 11) * AC_CHECK_TYPES: Generic Types. (line 28) * AC_CHECKING: Obsolete Macros. (line 101) * AC_COMPILE_CHECK: Obsolete Macros. (line 109) * AC_COMPILE_IFELSE: Running the Compiler. (line 13) * AC_COMPUTE_INT: Generic Compiler Characteristics. (line 42) * AC_CONFIG_AUX_DIR: Input. (line 20) * AC_CONFIG_COMMANDS: Configuration Commands. (line 13) * AC_CONFIG_COMMANDS_POST: Configuration Commands. (line 41) * AC_CONFIG_COMMANDS_PRE: Configuration Commands. (line 35) * AC_CONFIG_FILES: Configuration Files. (line 9) * AC_CONFIG_HEADERS: Configuration Headers. (line 33) * AC_CONFIG_ITEMS: Configuration Actions. (line 12) * AC_CONFIG_LIBOBJ_DIR: Generic Functions. (line 97) * AC_CONFIG_LINKS: Configuration Links. (line 12) * AC_CONFIG_MACRO_DIR: Input. (line 48) * AC_CONFIG_SRCDIR: Input. (line 7) * AC_CONFIG_SUBDIRS: Subdirectories. (line 12) * AC_CONFIG_TESTDIR: Making testsuite Scripts. (line 26) * AC_CONST: Obsolete Macros. (line 117) * AC_COPYRIGHT: Notices. (line 10) * AC_CROSS_CHECK: Obsolete Macros. (line 120) * AC_CYGWIN: Obsolete Macros. (line 124) * AC_DATAROOTDIR_CHECKED: Changed Directory Variables. (line 58) * AC_DECL_SYS_SIGLIST: Obsolete Macros. (line 141) * AC_DECL_YYTEXT: Obsolete Macros. (line 154) * AC_DEFINE: Defining Symbols. (line 32) * AC_DEFINE_UNQUOTED: Defining Symbols. (line 74) * AC_DEFUN: Macro Definitions. (line 7) * AC_DEFUN_ONCE: One-Shot Macros. (line 14) * AC_DIAGNOSE: Reporting Messages. (line 18) * AC_DIR_HEADER: Obsolete Macros. (line 158) * AC_DISABLE_OPTION_CHECKING: Option Checking. (line 28) * AC_DYNIX_SEQ: Obsolete Macros. (line 170) * AC_EGREP_CPP: Running the Preprocessor. (line 74) * AC_EGREP_HEADER: Running the Preprocessor. (line 67) * AC_EMXOS2: Obsolete Macros. (line 183) * AC_ENABLE: Obsolete Macros. (line 189) * AC_ERLANG_CHECK_LIB: Erlang Libraries. (line 36) * AC_ERLANG_NEED_ERL: Erlang Compiler and Interpreter. (line 41) * AC_ERLANG_NEED_ERLC: Erlang Compiler and Interpreter. (line 24) * AC_ERLANG_PATH_ERL: Erlang Compiler and Interpreter. (line 29) * AC_ERLANG_PATH_ERLC: Erlang Compiler and Interpreter. (line 10) * AC_ERLANG_SUBST_ERTS_VER: Erlang Libraries. (line 12) * AC_ERLANG_SUBST_INSTALL_LIB_DIR <1>: Erlang Libraries. (line 86) * AC_ERLANG_SUBST_INSTALL_LIB_DIR: Installation Directory Variables. (line 201) * AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR <1>: Erlang Libraries. (line 93) * AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR: Installation Directory Variables. (line 206) * AC_ERLANG_SUBST_LIB_DIR: Erlang Libraries. (line 28) * AC_ERLANG_SUBST_ROOT_DIR: Erlang Libraries. (line 22) * AC_ERROR: Obsolete Macros. (line 193) * AC_EXEEXT: Obsolete Macros. (line 178) * AC_F77_DUMMY_MAIN: Fortran Compiler. (line 130) * AC_F77_FUNC: Fortran Compiler. (line 266) * AC_F77_IMPLICIT_NONE: Fortran Compiler. (line 427) * AC_F77_LIBRARY_LDFLAGS: Fortran Compiler. (line 92) * AC_F77_MAIN: Fortran Compiler. (line 176) * AC_F77_WRAPPERS: Fortran Compiler. (line 202) * AC_FATAL: Reporting Messages. (line 34) * AC_FC_CHECK_BOUNDS: Fortran Compiler. (line 413) * AC_FC_DUMMY_MAIN: Fortran Compiler. (line 130) * AC_FC_FIXEDFORM: Fortran Compiler. (line 375) * AC_FC_FREEFORM: Fortran Compiler. (line 351) * AC_FC_FUNC: Fortran Compiler. (line 266) * AC_FC_IMPLICIT_NONE: Fortran Compiler. (line 427) * AC_FC_LIBRARY_LDFLAGS: Fortran Compiler. (line 92) * AC_FC_LINE_LENGTH: Fortran Compiler. (line 396) * AC_FC_MAIN: Fortran Compiler. (line 176) * AC_FC_MODULE_EXTENSION: Fortran Compiler. (line 438) * AC_FC_MODULE_FLAG: Fortran Compiler. (line 465) * AC_FC_MODULE_OUTPUT_FLAG: Fortran Compiler. (line 501) * AC_FC_PP_DEFINE: Fortran Compiler. (line 336) * AC_FC_PP_SRCEXT: Fortran Compiler. (line 279) * AC_FC_SRCEXT: Fortran Compiler. (line 279) * AC_FC_WRAPPERS: Fortran Compiler. (line 202) * AC_FIND_X: Obsolete Macros. (line 196) * AC_FIND_XTRA: Obsolete Macros. (line 199) * AC_FOREACH: Obsolete Macros. (line 202) * AC_FUNC_ALLOCA: Particular Functions. (line 10) * AC_FUNC_CHECK: Obsolete Macros. (line 205) * AC_FUNC_CHOWN: Particular Functions. (line 63) * AC_FUNC_CLOSEDIR_VOID: Particular Functions. (line 69) * AC_FUNC_ERROR_AT_LINE: Particular Functions. (line 84) * AC_FUNC_FNMATCH: Particular Functions. (line 94) * AC_FUNC_FNMATCH_GNU: Particular Functions. (line 109) * AC_FUNC_FORK: Particular Functions. (line 120) * AC_FUNC_FSEEKO: Particular Functions. (line 147) * AC_FUNC_GETGROUPS: Particular Functions. (line 155) * AC_FUNC_GETLOADAVG: Particular Functions. (line 161) * AC_FUNC_GETMNTENT: Particular Functions. (line 195) * AC_FUNC_GETPGRP: Particular Functions. (line 205) * AC_FUNC_LSTAT: Particular Functions. (line 363) * AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK: Particular Functions. (line 228) * AC_FUNC_MALLOC: Particular Functions. (line 247) * AC_FUNC_MBRTOWC: Particular Functions. (line 279) * AC_FUNC_MEMCMP: Particular Functions. (line 286) * AC_FUNC_MKTIME: Particular Functions. (line 299) * AC_FUNC_MMAP: Particular Functions. (line 311) * AC_FUNC_OBSTACK: Particular Functions. (line 319) * AC_FUNC_REALLOC: Particular Functions. (line 326) * AC_FUNC_SELECT_ARGTYPES: Particular Functions. (line 337) * AC_FUNC_SETPGRP: Particular Functions. (line 348) * AC_FUNC_SETVBUF_REVERSED: Obsolete Macros. (line 208) * AC_FUNC_STAT: Particular Functions. (line 363) * AC_FUNC_STRCOLL: Particular Functions. (line 379) * AC_FUNC_STRERROR_R: Particular Functions. (line 388) * AC_FUNC_STRFTIME: Particular Functions. (line 401) * AC_FUNC_STRNLEN: Particular Functions. (line 426) * AC_FUNC_STRTOD: Particular Functions. (line 408) * AC_FUNC_STRTOLD: Particular Functions. (line 420) * AC_FUNC_UTIME_NULL: Particular Functions. (line 433) * AC_FUNC_VPRINTF: Particular Functions. (line 443) * AC_FUNC_WAIT3: Obsolete Macros. (line 216) * AC_GCC_TRADITIONAL: Obsolete Macros. (line 224) * AC_GETGROUPS_T: Obsolete Macros. (line 228) * AC_GETLOADAVG: Obsolete Macros. (line 231) * AC_GNU_SOURCE: Obsolete Macros. (line 234) * AC_HAVE_FUNCS: Obsolete Macros. (line 238) * AC_HAVE_HEADERS: Obsolete Macros. (line 241) * AC_HAVE_LIBRARY: Obsolete Macros. (line 245) * AC_HAVE_POUNDBANG: Obsolete Macros. (line 252) * AC_HEADER_ASSERT: Particular Headers. (line 20) * AC_HEADER_CHECK: Obsolete Macros. (line 255) * AC_HEADER_DIRENT: Particular Headers. (line 25) * AC_HEADER_EGREP: Obsolete Macros. (line 258) * AC_HEADER_MAJOR: Particular Headers. (line 68) * AC_HEADER_RESOLV: Particular Headers. (line 73) * AC_HEADER_STAT: Particular Headers. (line 92) * AC_HEADER_STDBOOL: Particular Headers. (line 101) * AC_HEADER_STDC: Particular Headers. (line 135) * AC_HEADER_SYS_WAIT: Particular Headers. (line 204) * AC_HEADER_TIME: Particular Headers. (line 244) * AC_HEADER_TIOCGWINSZ: Particular Headers. (line 270) * AC_HELP_STRING: Obsolete Macros. (line 261) * AC_INCLUDES_DEFAULT: Default Includes. (line 29) * AC_INIT <1>: Obsolete Macros. (line 264) * AC_INIT: Initializing configure. (line 14) * AC_INLINE: Obsolete Macros. (line 272) * AC_INT_16_BITS: Obsolete Macros. (line 275) * AC_IRIX_SUN: Obsolete Macros. (line 279) * AC_ISC_POSIX: Obsolete Macros. (line 295) * AC_LANG: Language Choice. (line 14) * AC_LANG_ASSERT: Language Choice. (line 79) * AC_LANG_C: Obsolete Macros. (line 302) * AC_LANG_CALL: Generating Sources. (line 142) * AC_LANG_CONFTEST: Generating Sources. (line 12) * AC_LANG_CPLUSPLUS: Obsolete Macros. (line 305) * AC_LANG_DEFINES_PROVIDED: Generating Sources. (line 31) * AC_LANG_FORTRAN77: Obsolete Macros. (line 308) * AC_LANG_FUNC_LINK_TRY: Generating Sources. (line 154) * AC_LANG_POP: Language Choice. (line 66) * AC_LANG_PROGRAM: Generating Sources. (line 78) * AC_LANG_PUSH: Language Choice. (line 61) * AC_LANG_RESTORE: Obsolete Macros. (line 311) * AC_LANG_SAVE: Obsolete Macros. (line 317) * AC_LANG_SOURCE: Generating Sources. (line 40) * AC_LANG_WERROR: Generic Compiler Characteristics. (line 54) * AC_LIBOBJ: Generic Functions. (line 56) * AC_LIBSOURCE: Generic Functions. (line 65) * AC_LIBSOURCES: Generic Functions. (line 89) * AC_LINK_FILES: Obsolete Macros. (line 322) * AC_LINK_IFELSE: Running the Linker. (line 24) * AC_LN_S: Obsolete Macros. (line 334) * AC_LONG_64_BITS: Obsolete Macros. (line 337) * AC_LONG_DOUBLE: Obsolete Macros. (line 342) * AC_LONG_FILE_NAMES: Obsolete Macros. (line 350) * AC_MAJOR_HEADER: Obsolete Macros. (line 355) * AC_MEMORY_H: Obsolete Macros. (line 358) * AC_MINGW32: Obsolete Macros. (line 365) * AC_MINIX: Obsolete Macros. (line 371) * AC_MINUS_C_MINUS_O: Obsolete Macros. (line 375) * AC_MMAP: Obsolete Macros. (line 378) * AC_MODE_T: Obsolete Macros. (line 381) * AC_MSG_CHECKING: Printing Messages. (line 24) * AC_MSG_ERROR: Printing Messages. (line 56) * AC_MSG_FAILURE: Printing Messages. (line 66) * AC_MSG_NOTICE: Printing Messages. (line 46) * AC_MSG_RESULT: Printing Messages. (line 35) * AC_MSG_WARN: Printing Messages. (line 72) * AC_OBJEXT: Obsolete Macros. (line 384) * AC_OBSOLETE: Obsolete Macros. (line 390) * AC_OFF_T: Obsolete Macros. (line 405) * AC_OPENMP: Generic Compiler Characteristics. (line 64) * AC_OUTPUT <1>: Obsolete Macros. (line 408) * AC_OUTPUT: Output. (line 13) * AC_OUTPUT_COMMANDS: Obsolete Macros. (line 420) * AC_PACKAGE_BUGREPORT: Initializing configure. (line 57) * AC_PACKAGE_NAME: Initializing configure. (line 45) * AC_PACKAGE_STRING: Initializing configure. (line 54) * AC_PACKAGE_TARNAME: Initializing configure. (line 48) * AC_PACKAGE_URL: Initializing configure. (line 61) * AC_PACKAGE_VERSION: Initializing configure. (line 51) * AC_PATH_PROG: Generic Programs. (line 108) * AC_PATH_PROGS: Generic Programs. (line 115) * AC_PATH_PROGS_FEATURE_CHECK: Generic Programs. (line 123) * AC_PATH_TARGET_TOOL: Generic Programs. (line 159) * AC_PATH_TOOL: Generic Programs. (line 164) * AC_PATH_X: System Services. (line 10) * AC_PATH_XTRA: System Services. (line 30) * AC_PID_T: Obsolete Macros. (line 450) * AC_PREFIX: Obsolete Macros. (line 453) * AC_PREFIX_DEFAULT: Default Prefix. (line 16) * AC_PREFIX_PROGRAM: Default Prefix. (line 25) * AC_PREPROC_IFELSE: Running the Preprocessor. (line 20) * AC_PREREQ: Versioning. (line 11) * AC_PRESERVE_HELP_ORDER: Help Formatting. (line 20) * AC_PROG_AWK: Particular Programs. (line 10) * AC_PROG_CC: C Compiler. (line 61) * AC_PROG_CC_C89: C Compiler. (line 147) * AC_PROG_CC_C99: C Compiler. (line 161) * AC_PROG_CC_C_O: C Compiler. (line 102) * AC_PROG_CC_STDC: C Compiler. (line 137) * AC_PROG_CPP: C Compiler. (line 113) * AC_PROG_CPP_WERROR: C Compiler. (line 126) * AC_PROG_CXX: C++ Compiler. (line 7) * AC_PROG_CXX_C_O: C++ Compiler. (line 48) * AC_PROG_CXXCPP: C++ Compiler. (line 35) * AC_PROG_EGREP: Particular Programs. (line 29) * AC_PROG_F77: Fortran Compiler. (line 19) * AC_PROG_F77_C_O: Fortran Compiler. (line 76) * AC_PROG_FC: Fortran Compiler. (line 44) * AC_PROG_FC_C_O: Fortran Compiler. (line 76) * AC_PROG_FGREP: Particular Programs. (line 36) * AC_PROG_GCC_TRADITIONAL: C Compiler. (line 361) * AC_PROG_GREP: Particular Programs. (line 20) * AC_PROG_INSTALL: Particular Programs. (line 43) * AC_PROG_LEX: Particular Programs. (line 114) * AC_PROG_LN_S: Particular Programs. (line 168) * AC_PROG_MAKE_SET: Output. (line 45) * AC_PROG_MKDIR_P: Particular Programs. (line 80) * AC_PROG_OBJC: Objective C Compiler. (line 7) * AC_PROG_OBJCPP: Objective C Compiler. (line 26) * AC_PROG_OBJCXX: Objective C++ Compiler. (line 7) * AC_PROG_OBJCXXCPP: Objective C++ Compiler. (line 27) * AC_PROG_RANLIB: Particular Programs. (line 187) * AC_PROG_SED: Particular Programs. (line 191) * AC_PROG_YACC: Particular Programs. (line 200) * AC_PROGRAM_CHECK: Obsolete Macros. (line 462) * AC_PROGRAM_EGREP: Obsolete Macros. (line 465) * AC_PROGRAM_PATH: Obsolete Macros. (line 468) * AC_PROGRAMS_CHECK: Obsolete Macros. (line 456) * AC_PROGRAMS_PATH: Obsolete Macros. (line 459) * AC_REMOTE_TAPE: Obsolete Macros. (line 471) * AC_REPLACE_FNMATCH: Particular Functions. (line 452) * AC_REPLACE_FUNCS: Generic Functions. (line 117) * AC_REQUIRE: Prerequisite Macros. (line 17) * AC_REQUIRE_AUX_FILE: Input. (line 37) * AC_REQUIRE_CPP: Language Choice. (line 94) * AC_RESTARTABLE_SYSCALLS: Obsolete Macros. (line 474) * AC_RETSIGTYPE: Obsolete Macros. (line 482) * AC_REVISION: Notices. (line 18) * AC_RSH: Obsolete Macros. (line 486) * AC_RUN_IFELSE: Runtime. (line 20) * AC_SCO_INTL: Obsolete Macros. (line 489) * AC_SEARCH_LIBS: Libraries. (line 52) * AC_SET_MAKE: Obsolete Macros. (line 503) * AC_SETVBUF_REVERSED: Obsolete Macros. (line 498) * AC_SIZE_T: Obsolete Macros. (line 509) * AC_SIZEOF_TYPE: Obsolete Macros. (line 506) * AC_ST_BLKSIZE: Obsolete Macros. (line 539) * AC_ST_BLOCKS: Obsolete Macros. (line 542) * AC_ST_RDEV: Obsolete Macros. (line 545) * AC_STAT_MACROS_BROKEN: Obsolete Macros. (line 512) * AC_STDC_HEADERS: Obsolete Macros. (line 515) * AC_STRCOLL: Obsolete Macros. (line 518) * AC_STRUCT_DIRENT_D_INO: Particular Structures. (line 9) * AC_STRUCT_DIRENT_D_TYPE: Particular Structures. (line 21) * AC_STRUCT_ST_BLKSIZE: Obsolete Macros. (line 521) * AC_STRUCT_ST_BLOCKS: Particular Structures. (line 26) * AC_STRUCT_ST_RDEV: Obsolete Macros. (line 530) * AC_STRUCT_TIMEZONE: Particular Structures. (line 43) * AC_STRUCT_TM: Particular Structures. (line 35) * AC_SUBST: Setting Output Variables. (line 13) * AC_SUBST_FILE: Setting Output Variables. (line 38) * AC_SYS_INTERPRETER: System Services. (line 42) * AC_SYS_LARGEFILE: System Services. (line 49) * AC_SYS_LONG_FILE_NAMES: System Services. (line 71) * AC_SYS_POSIX_TERMIOS: System Services. (line 75) * AC_SYS_RESTARTABLE_SYSCALLS: Obsolete Macros. (line 548) * AC_SYS_SIGLIST_DECLARED: Obsolete Macros. (line 563) * AC_TEST_CPP: Obsolete Macros. (line 568) * AC_TEST_PROGRAM: Obsolete Macros. (line 572) * AC_TIME_WITH_SYS_TIME: Obsolete Macros. (line 579) * AC_TIMEZONE: Obsolete Macros. (line 576) * AC_TRY_ACT: AC_ACT_IFELSE vs AC_TRY_ACT. (line 6) * AC_TRY_COMPILE: Obsolete Macros. (line 583) * AC_TRY_CPP: Obsolete Macros. (line 602) * AC_TRY_LINK: Obsolete Macros. (line 615) * AC_TRY_LINK_FUNC: Obsolete Macros. (line 644) * AC_TRY_RUN: Obsolete Macros. (line 651) * AC_TYPE_GETGROUPS: Particular Types. (line 14) * AC_TYPE_INT16_T: Particular Types. (line 40) * AC_TYPE_INT32_T: Particular Types. (line 43) * AC_TYPE_INT64_T: Particular Types. (line 46) * AC_TYPE_INT8_T: Particular Types. (line 21) * AC_TYPE_INTMAX_T: Particular Types. (line 49) * AC_TYPE_INTPTR_T: Particular Types. (line 54) * AC_TYPE_LONG_DOUBLE: Particular Types. (line 59) * AC_TYPE_LONG_DOUBLE_WIDER: Particular Types. (line 70) * AC_TYPE_LONG_LONG_INT: Particular Types. (line 78) * AC_TYPE_MBSTATE_T: Particular Types. (line 88) * AC_TYPE_MODE_T: Particular Types. (line 96) * AC_TYPE_OFF_T: Particular Types. (line 102) * AC_TYPE_PID_T: Particular Types. (line 108) * AC_TYPE_SIGNAL: Obsolete Macros. (line 662) * AC_TYPE_SIZE_T: Particular Types. (line 114) * AC_TYPE_SSIZE_T: Particular Types. (line 120) * AC_TYPE_UID_T: Particular Types. (line 126) * AC_TYPE_UINT16_T: Particular Types. (line 138) * AC_TYPE_UINT32_T: Particular Types. (line 141) * AC_TYPE_UINT64_T: Particular Types. (line 144) * AC_TYPE_UINT8_T: Particular Types. (line 132) * AC_TYPE_UINTMAX_T: Particular Types. (line 147) * AC_TYPE_UINTPTR_T: Particular Types. (line 152) * AC_TYPE_UNSIGNED_LONG_LONG_INT: Particular Types. (line 157) * AC_UID_T: Obsolete Macros. (line 679) * AC_UNISTD_H: Obsolete Macros. (line 682) * AC_USE_SYSTEM_EXTENSIONS: Posix Variants. (line 10) * AC_USG: Obsolete Macros. (line 685) * AC_UTIME_NULL: Obsolete Macros. (line 690) * AC_VALIDATE_CACHED_SYSTEM_TUPLE: Obsolete Macros. (line 693) * AC_VERBOSE: Obsolete Macros. (line 698) * AC_VFORK: Obsolete Macros. (line 701) * AC_VPRINTF: Obsolete Macros. (line 704) * AC_WAIT3: Obsolete Macros. (line 707) * AC_WARN: Obsolete Macros. (line 712) * AC_WARNING: Reporting Messages. (line 26) * AC_WITH: Obsolete Macros. (line 715) * AC_WORDS_BIGENDIAN: Obsolete Macros. (line 719) * AC_XENIX_DIR: Obsolete Macros. (line 722) * AC_YYTEXT_POINTER: Obsolete Macros. (line 739) * AH_BOTTOM: Autoheader Macros. (line 50) * AH_HEADER: Configuration Headers. (line 54) * AH_TEMPLATE: Autoheader Macros. (line 19) * AH_TOP: Autoheader Macros. (line 47) * AH_VERBATIM: Autoheader Macros. (line 40) * AU_ALIAS: Obsoleting Macros. (line 34) * AU_DEFUN: Obsoleting Macros. (line 18)  File: autoconf.info, Node: M4 Macro Index, Next: Autotest Macro Index, Prev: Autoconf Macro Index, Up: Indices B.6 M4 Macro Index ================== This is an alphabetical list of the M4, M4sugar, and M4sh macros. [index] * Menu: * __file__: Redefined M4 Macros. (line 65) * __line__: Redefined M4 Macros. (line 65) * __oline__: Redefined M4 Macros. (line 69) * AS_BOURNE_COMPATIBLE: Initialization Macros. (line 7) * AS_BOX: Common Shell Constructs. (line 10) * AS_CASE: Common Shell Constructs. (line 19) * AS_DIRNAME: Common Shell Constructs. (line 26) * AS_ECHO: Common Shell Constructs. (line 34) * AS_ECHO_N: Common Shell Constructs. (line 42) * AS_ESCAPE: Common Shell Constructs. (line 50) * AS_EXECUTABLE_P: Common Shell Constructs. (line 90) * AS_EXIT: Common Shell Constructs. (line 95) * AS_HELP_STRING: Pretty Help Strings. (line 15) * AS_IF: Common Shell Constructs. (line 101) * AS_INIT: Initialization Macros. (line 14) * AS_INIT_GENERATED: Initialization Macros. (line 26) * AS_LINENO_PREPARE: Initialization Macros. (line 67) * AS_LITERAL_IF: Polymorphic Variables. (line 21) * AS_LITERAL_WORD_IF: Polymorphic Variables. (line 21) * AS_ME_PREPARE: Initialization Macros. (line 72) * AS_MESSAGE_FD: File Descriptor Macros. (line 17) * AS_MESSAGE_LOG_FD: File Descriptor Macros. (line 29) * AS_MKDIR_P: Common Shell Constructs. (line 115) * AS_ORIGINAL_STDIN_FD: File Descriptor Macros. (line 39) * AS_SET_CATFILE: Common Shell Constructs. (line 155) * AS_SET_STATUS: Common Shell Constructs. (line 127) * AS_SHELL_SANITIZE: Initialization Macros. (line 101) * AS_TMPDIR: Initialization Macros. (line 77) * AS_TR_CPP: Common Shell Constructs. (line 135) * AS_TR_SH: Common Shell Constructs. (line 144) * AS_UNSET: Common Shell Constructs. (line 159) * AS_VAR_APPEND: Polymorphic Variables. (line 63) * AS_VAR_ARITH: Polymorphic Variables. (line 85) * AS_VAR_COPY: Polymorphic Variables. (line 103) * AS_VAR_IF: Polymorphic Variables. (line 122) * AS_VAR_POPDEF: Polymorphic Variables. (line 131) * AS_VAR_PUSHDEF: Polymorphic Variables. (line 131) * AS_VAR_SET: Polymorphic Variables. (line 173) * AS_VAR_SET_IF: Polymorphic Variables. (line 183) * AS_VAR_TEST_SET: Polymorphic Variables. (line 188) * AS_VERSION_COMPARE: Common Shell Constructs. (line 165) * dnl: Redefined M4 Macros. (line 76) * m4_append: Text processing Macros. (line 16) * m4_append_uniq: Text processing Macros. (line 16) * m4_append_uniq_w: Text processing Macros. (line 69) * m4_apply: Evaluation Macros. (line 10) * m4_argn: Looping constructs. (line 29) * m4_assert: Diagnostic Macros. (line 11) * m4_bmatch: Conditional constructs. (line 11) * m4_bpatsubst: Redefined M4 Macros. (line 79) * m4_bpatsubsts: Conditional constructs. (line 18) * m4_bregexp: Redefined M4 Macros. (line 84) * m4_builtin: Redefined M4 Macros. (line 6) * m4_car: Looping constructs. (line 35) * m4_case: Conditional constructs. (line 33) * m4_cdr: Looping constructs. (line 41) * m4_changecom: Redefined M4 Macros. (line 6) * m4_changequote: Redefined M4 Macros. (line 6) * m4_chomp: Text processing Macros. (line 80) * m4_chomp_all: Text processing Macros. (line 80) * m4_cleardivert: Diversion support. (line 125) * m4_cmp: Number processing Macros. (line 11) * m4_combine: Text processing Macros. (line 88) * m4_cond: Conditional constructs. (line 42) * m4_copy: Redefined M4 Macros. (line 92) * m4_copy_force: Redefined M4 Macros. (line 92) * m4_count: Evaluation Macros. (line 26) * m4_curry: Evaluation Macros. (line 30) * m4_debugfile: Redefined M4 Macros. (line 6) * m4_debugmode: Redefined M4 Macros. (line 6) * m4_decr: Redefined M4 Macros. (line 6) * m4_default: Conditional constructs. (line 73) * m4_default_nblank: Conditional constructs. (line 73) * m4_default_nblank_quoted: Conditional constructs. (line 73) * m4_default_quoted: Conditional constructs. (line 73) * m4_define: Redefined M4 Macros. (line 6) * m4_define_default: Conditional constructs. (line 122) * m4_defn: Redefined M4 Macros. (line 111) * m4_divert: Redefined M4 Macros. (line 119) * m4_divert_once: Diversion support. (line 128) * m4_divert_pop: Diversion support. (line 133) * m4_divert_push: Diversion support. (line 139) * m4_divert_text: Diversion support. (line 145) * m4_divnum: Redefined M4 Macros. (line 6) * m4_do: Evaluation Macros. (line 45) * m4_dquote: Evaluation Macros. (line 65) * m4_dquote_elt: Evaluation Macros. (line 70) * m4_dumpdef: Redefined M4 Macros. (line 131) * m4_dumpdefs: Redefined M4 Macros. (line 131) * m4_echo: Evaluation Macros. (line 75) * m4_errprint: Redefined M4 Macros. (line 6) * m4_errprintn: Diagnostic Macros. (line 16) * m4_escape: Text processing Macros. (line 108) * m4_esyscmd: Redefined M4 Macros. (line 6) * m4_esyscmd_s: Redefined M4 Macros. (line 148) * m4_eval: Redefined M4 Macros. (line 6) * m4_exit: Redefined M4 Macros. (line 154) * m4_expand: Evaluation Macros. (line 79) * m4_fatal: Diagnostic Macros. (line 20) * m4_flatten: Text processing Macros. (line 113) * m4_for: Looping constructs. (line 59) * m4_foreach: Looping constructs. (line 69) * m4_foreach_w: Looping constructs. (line 83) * m4_format: Redefined M4 Macros. (line 6) * m4_if: Redefined M4 Macros. (line 160) * m4_ifblank: Conditional constructs. (line 127) * m4_ifdef: Redefined M4 Macros. (line 6) * m4_ifnblank: Conditional constructs. (line 127) * m4_ifndef: Conditional constructs. (line 135) * m4_ifset: Conditional constructs. (line 139) * m4_ifval: Conditional constructs. (line 145) * m4_ifvaln: Conditional constructs. (line 150) * m4_ignore: Evaluation Macros. (line 129) * m4_include: Redefined M4 Macros. (line 167) * m4_incr: Redefined M4 Macros. (line 6) * m4_index: Redefined M4 Macros. (line 6) * m4_indir: Redefined M4 Macros. (line 6) * m4_init: Diversion support. (line 171) * m4_join: Text processing Macros. (line 119) * m4_joinall: Text processing Macros. (line 119) * m4_len: Redefined M4 Macros. (line 6) * m4_list_cmp: Number processing Macros. (line 16) * m4_location: Diagnostic Macros. (line 24) * m4_make_list: Evaluation Macros. (line 142) * m4_maketemp: Redefined M4 Macros. (line 171) * m4_map: Looping constructs. (line 93) * m4_map_args: Looping constructs. (line 130) * m4_map_args_pair: Looping constructs. (line 166) * m4_map_args_sep: Looping constructs. (line 178) * m4_map_args_w: Looping constructs. (line 189) * m4_map_sep: Looping constructs. (line 93) * m4_mapall: Looping constructs. (line 93) * m4_mapall_sep: Looping constructs. (line 93) * m4_max: Number processing Macros. (line 38) * m4_min: Number processing Macros. (line 42) * m4_mkstemp: Redefined M4 Macros. (line 171) * m4_n: Conditional constructs. (line 154) * m4_newline: Text processing Macros. (line 134) * m4_normalize: Text processing Macros. (line 140) * m4_pattern_allow: Forbidden Patterns. (line 30) * m4_pattern_forbid: Forbidden Patterns. (line 17) * m4_popdef: Redefined M4 Macros. (line 182) * m4_pushdef: Redefined M4 Macros. (line 6) * m4_quote: Evaluation Macros. (line 161) * m4_re_escape: Text processing Macros. (line 148) * m4_rename: Redefined M4 Macros. (line 92) * m4_rename_force: Redefined M4 Macros. (line 92) * m4_reverse: Evaluation Macros. (line 167) * m4_set_add: Set manipulation Macros. (line 19) * m4_set_add_all: Set manipulation Macros. (line 25) * m4_set_contains: Set manipulation Macros. (line 29) * m4_set_contents: Set manipulation Macros. (line 49) * m4_set_delete: Set manipulation Macros. (line 79) * m4_set_difference: Set manipulation Macros. (line 86) * m4_set_dump: Set manipulation Macros. (line 49) * m4_set_empty: Set manipulation Macros. (line 109) * m4_set_foreach: Set manipulation Macros. (line 115) * m4_set_intersection: Set manipulation Macros. (line 86) * m4_set_list: Set manipulation Macros. (line 136) * m4_set_listc: Set manipulation Macros. (line 136) * m4_set_map: Set manipulation Macros. (line 171) * m4_set_map_sep: Set manipulation Macros. (line 184) * m4_set_remove: Set manipulation Macros. (line 195) * m4_set_size: Set manipulation Macros. (line 206) * m4_set_union: Set manipulation Macros. (line 86) * m4_shift: Redefined M4 Macros. (line 6) * m4_shift2: Looping constructs. (line 199) * m4_shift3: Looping constructs. (line 199) * m4_shiftn: Looping constructs. (line 199) * m4_sign: Number processing Macros. (line 46) * m4_sinclude: Redefined M4 Macros. (line 167) * m4_split: Text processing Macros. (line 152) * m4_stack_foreach: Looping constructs. (line 208) * m4_stack_foreach_lifo: Looping constructs. (line 208) * m4_stack_foreach_sep: Looping constructs. (line 230) * m4_stack_foreach_sep_lifo: Looping constructs. (line 230) * m4_strip: Text processing Macros. (line 158) * m4_substr: Redefined M4 Macros. (line 6) * m4_syscmd: Redefined M4 Macros. (line 6) * m4_sysval: Redefined M4 Macros. (line 6) * m4_text_box: Text processing Macros. (line 167) * m4_text_wrap: Text processing Macros. (line 182) * m4_tolower: Text processing Macros. (line 213) * m4_toupper: Text processing Macros. (line 213) * m4_traceoff: Redefined M4 Macros. (line 6) * m4_traceon: Redefined M4 Macros. (line 6) * m4_translit: Redefined M4 Macros. (line 6) * m4_undefine: Redefined M4 Macros. (line 186) * m4_undivert: Redefined M4 Macros. (line 194) * m4_unquote: Evaluation Macros. (line 176) * m4_version_compare: Number processing Macros. (line 50) * m4_version_prereq: Number processing Macros. (line 90) * m4_warn: Diagnostic Macros. (line 28) * m4_wrap: Redefined M4 Macros. (line 204) * m4_wrap_lifo: Redefined M4 Macros. (line 204)  File: autoconf.info, Node: Autotest Macro Index, Next: Program & Function Index, Prev: M4 Macro Index, Up: Indices B.7 Autotest Macro Index ======================== This is an alphabetical list of the Autotest macros. [index] * Menu: * AT_ARG_OPTION: Writing Testsuites. (line 50) * AT_ARG_OPTION_ARG: Writing Testsuites. (line 79) * AT_BANNER: Writing Testsuites. (line 124) * AT_CAPTURE_FILE: Writing Testsuites. (line 155) * AT_CHECK: Writing Testsuites. (line 212) * AT_CHECK_EUNIT: Writing Testsuites. (line 302) * AT_CHECK_UNQUOTED: Writing Testsuites. (line 212) * AT_CLEANUP: Writing Testsuites. (line 198) * AT_COLOR_TESTS: Writing Testsuites. (line 105) * AT_COPYRIGHT: Writing Testsuites. (line 41) * AT_DATA: Writing Testsuites. (line 202) * AT_FAIL_IF: Writing Testsuites. (line 160) * AT_INIT: Writing Testsuites. (line 31) * AT_KEYWORDS: Writing Testsuites. (line 142) * AT_PACKAGE_BUGREPORT: Making testsuite Scripts. (line 12) * AT_PACKAGE_NAME: Making testsuite Scripts. (line 12) * AT_PACKAGE_STRING: Making testsuite Scripts. (line 12) * AT_PACKAGE_TARNAME: Making testsuite Scripts. (line 12) * AT_PACKAGE_URL: Making testsuite Scripts. (line 12) * AT_PACKAGE_VERSION: Making testsuite Scripts. (line 12) * AT_SETUP: Writing Testsuites. (line 134) * AT_SKIP_IF: Writing Testsuites. (line 175) * AT_TESTED: Writing Testsuites. (line 109) * AT_XFAIL_IF: Writing Testsuites. (line 190)  File: autoconf.info, Node: Program & Function Index, Next: Concept Index, Prev: Autotest Macro Index, Up: Indices B.8 Program and Function Index ============================== This is an alphabetical list of the programs and functions whose portability is discussed in this document. [index] * Menu: * !: Limitations of Builtins. (line 41) * .: Limitations of Builtins. (line 17) * /usr/bin/ksh on Solaris: Shellology. (line 63) * /usr/dt/bin/dtksh on Solaris: Shellology. (line 66) * /usr/xpg4/bin/sh on Solaris: Shellology. (line 64) * alloca: Particular Functions. (line 10) * alloca.h: Particular Functions. (line 10) * assert.h: Particular Headers. (line 20) * awk: Limitations of Usual Tools. (line 10) * basename: Limitations of Usual Tools. (line 142) * break: Limitations of Builtins. (line 107) * case: Limitations of Builtins. (line 110) * cat: Limitations of Usual Tools. (line 146) * cc: Limitations of Usual Tools. (line 149) * cd: Limitations of Builtins. (line 203) * chgrp: Limitations of Usual Tools. (line 183) * chmod: Limitations of Usual Tools. (line 187) * chown <1>: Limitations of Usual Tools. (line 183) * chown: Particular Functions. (line 63) * closedir: Particular Functions. (line 69) * cmp: Limitations of Usual Tools. (line 197) * cp: Limitations of Usual Tools. (line 204) * ctype.h: Particular Headers. (line 135) * date: Limitations of Usual Tools. (line 264) * diff: Limitations of Usual Tools. (line 274) * dirent.h: Particular Headers. (line 25) * dirname: Limitations of Usual Tools. (line 280) * echo: Limitations of Builtins. (line 233) * egrep: Limitations of Usual Tools. (line 287) * error_at_line: Particular Functions. (line 84) * eval: Limitations of Builtins. (line 270) * exec: Limitations of Builtins. (line 315) * exit <1>: Limitations of Builtins. (line 355) * exit: Function Portability. (line 17) * export: Limitations of Builtins. (line 380) * expr: Limitations of Usual Tools. (line 312) * expr (|): Limitations of Usual Tools. (line 326) * false: Limitations of Builtins. (line 428) * fgrep: Limitations of Usual Tools. (line 435) * find: Limitations of Usual Tools. (line 444) * float.h: Particular Headers. (line 135) * fnmatch: Particular Functions. (line 94) * fnmatch.h: Particular Functions. (line 452) * for: Limitations of Builtins. (line 432) * fork: Particular Functions. (line 120) * free: Function Portability. (line 27) * fseeko: Particular Functions. (line 147) * ftello: Particular Functions. (line 147) * getgroups: Particular Functions. (line 155) * getloadavg: Particular Functions. (line 161) * getmntent: Particular Functions. (line 195) * getpgid: Particular Functions. (line 205) * getpgrp: Particular Functions. (line 205) * grep: Limitations of Usual Tools. (line 458) * if: Limitations of Builtins. (line 477) * inttypes.h <1>: Particular Types. (line 6) * inttypes.h: Header Portability. (line 20) * isinf: Function Portability. (line 32) * isnan: Function Portability. (line 32) * join: Limitations of Usual Tools. (line 526) * ksh: Shellology. (line 57) * ksh88: Shellology. (line 57) * ksh93: Shellology. (line 57) * linux/irda.h: Header Portability. (line 27) * linux/random.h: Header Portability. (line 30) * ln: Limitations of Usual Tools. (line 543) * ls: Limitations of Usual Tools. (line 555) * lstat: Particular Functions. (line 228) * make: Portable Make. (line 6) * malloc <1>: Particular Functions. (line 247) * malloc: Function Portability. (line 82) * mbrtowc: Particular Functions. (line 279) * memcmp: Particular Functions. (line 286) * mkdir: Limitations of Usual Tools. (line 577) * mkfifo: Limitations of Usual Tools. (line 611) * mknod: Limitations of Usual Tools. (line 611) * mktemp: Limitations of Usual Tools. (line 621) * mktime: Particular Functions. (line 299) * mmap: Particular Functions. (line 311) * mv: Limitations of Usual Tools. (line 646) * ndir.h: Particular Headers. (line 25) * net/if.h: Header Portability. (line 33) * netinet/if_ether.h: Header Portability. (line 53) * nlist.h: Particular Functions. (line 178) * od: Limitations of Usual Tools. (line 678) * pdksh: Shellology. (line 77) * printf: Limitations of Builtins. (line 516) * putenv: Function Portability. (line 89) * pwd: Limitations of Builtins. (line 543) * read: Limitations of Builtins. (line 574) * realloc <1>: Particular Functions. (line 326) * realloc: Function Portability. (line 105) * resolv.h: Particular Headers. (line 73) * rm: Limitations of Usual Tools. (line 687) * rmdir: Limitations of Usual Tools. (line 706) * sed: Limitations of Usual Tools. (line 710) * sed (t): Limitations of Usual Tools. (line 905) * select: Particular Functions. (line 337) * set: Limitations of Builtins. (line 580) * setpgrp: Particular Functions. (line 348) * setvbuf: Obsolete Macros. (line 208) * shift: Limitations of Builtins. (line 732) * sigaction: Function Portability. (line 110) * signal: Function Portability. (line 110) * signal.h: Obsolete Macros. (line 662) * sleep: Limitations of Usual Tools. (line 965) * snprintf: Function Portability. (line 124) * sort: Limitations of Usual Tools. (line 971) * source: Limitations of Builtins. (line 740) * sprintf: Function Portability. (line 135) * sscanf: Function Portability. (line 141) * stat: Particular Functions. (line 363) * stdarg.h: Particular Headers. (line 135) * stdbool.h: Particular Headers. (line 10) * stdint.h <1>: Particular Types. (line 6) * stdint.h: Header Portability. (line 20) * stdlib.h <1>: Particular Types. (line 6) * stdlib.h <2>: Particular Headers. (line 135) * stdlib.h: Header Portability. (line 76) * strcoll: Particular Functions. (line 379) * strerror_r <1>: Particular Functions. (line 388) * strerror_r: Function Portability. (line 149) * strftime: Particular Functions. (line 401) * string.h: Particular Headers. (line 135) * strings.h: Particular Headers. (line 154) * strnlen <1>: Particular Functions. (line 426) * strnlen: Function Portability. (line 155) * strtod: Particular Functions. (line 408) * strtold: Particular Functions. (line 420) * sys/dir.h: Particular Headers. (line 25) * sys/ioctl.h: Particular Headers. (line 270) * sys/mkdev.h: Particular Headers. (line 68) * sys/mount.h: Header Portability. (line 79) * sys/ndir.h: Particular Headers. (line 25) * sys/ptem.h: Header Portability. (line 83) * sys/socket.h: Header Portability. (line 86) * sys/stat.h: Particular Headers. (line 92) * sys/sysmacros.h: Particular Headers. (line 68) * sys/time.h <1>: Particular Structures. (line 35) * sys/time.h: Particular Headers. (line 244) * sys/types.h: Particular Types. (line 6) * sys/ucred.h: Header Portability. (line 89) * sys/wait.h: Particular Headers. (line 204) * sysconf: Function Portability. (line 170) * tar: Limitations of Usual Tools. (line 976) * termios.h: Particular Headers. (line 270) * test: Limitations of Builtins. (line 744) * time.h <1>: Particular Structures. (line 35) * time.h: Particular Headers. (line 244) * touch: Limitations of Usual Tools. (line 981) * tr: Limitations of Usual Tools. (line 994) * trap: Limitations of Builtins. (line 856) * true: Limitations of Builtins. (line 930) * unistd.h: Particular Headers. (line 228) * unlink: Function Portability. (line 174) * unset: Limitations of Builtins. (line 946) * unsetenv: Function Portability. (line 180) * utime: Particular Functions. (line 433) * va_copy: Function Portability. (line 185) * va_list: Function Portability. (line 192) * vfork: Particular Functions. (line 120) * vfork.h: Particular Functions. (line 120) * vprintf: Particular Functions. (line 443) * vsnprintf: Function Portability. (line 124) * vsprintf <1>: Particular Functions. (line 443) * vsprintf: Function Portability. (line 135) * wait: Limitations of Builtins. (line 973) * wait3: Obsolete Macros. (line 216) * wchar.h: Particular Types. (line 88) * X11/extensions/scrnsaver.h: Header Portability. (line 92) * {...}: Limitations of Builtins. (line 74)  File: autoconf.info, Node: Concept Index, Prev: Program & Function Index, Up: Indices B.9 Concept Index ================= This is an alphabetical list of the files, tools, and concepts introduced in this document. [index] * Menu: * "$@": Shell Substitutions. (line 70) * $((EXPRESSION)): Shell Substitutions. (line 456) * $(COMMANDS): Shell Substitutions. (line 423) * $<, explicit rules, and VPATH: $< in Explicit Rules. (line 6) * ${#VAR}: Shell Substitutions. (line 369) * ${VAR##WORD}: Shell Substitutions. (line 369) * ${VAR#WORD}: Shell Substitutions. (line 369) * ${VAR%%WORD}: Shell Substitutions. (line 369) * ${VAR%WORD}: Shell Substitutions. (line 369) * ${VAR+VALUE}: Shell Substitutions. (line 148) * ${VAR-VALUE}: Shell Substitutions. (line 140) * ${VAR=EXPANDED-VALUE}: Shell Substitutions. (line 319) * ${VAR=LITERAL}: Shell Substitutions. (line 295) * ${VAR=VALUE}: Shell Substitutions. (line 215) * 64-bit libraries: Site Defaults. (line 97) * @&t@: Quadrigraphs. (line 6) * @S|@: Quadrigraphs. (line 6) * ^ quoting: Shell Substitutions. (line 496) * _m4_divert_diversion: New Macros. (line 6) * `COMMANDS`: Shell Substitutions. (line 377) * abs_builddir: Preset Output Variables. (line 177) * abs_srcdir: Preset Output Variables. (line 199) * abs_top_builddir: Preset Output Variables. (line 192) * abs_top_srcdir: Preset Output Variables. (line 206) * absolute file names, detect: File System Conventions. (line 52) * ac_objext: Generic Functions. (line 59) * ac_path_VARIABLE: Generic Programs. (line 123) * ac_path_VARIABLE_found: Generic Programs. (line 123) * ac_srcdir: Configuration Actions. (line 85) * ac_top_build_prefix: Configuration Actions. (line 80) * ac_top_srcdir: Configuration Actions. (line 76) * acconfig.h: acconfig Header. (line 6) * aclocal.m4: Making configure Scripts. (line 6) * Ash: Shellology. (line 16) * at_arg_OPTION: Writing Testsuites. (line 50) * at_optarg: Writing Testsuites. (line 62) * at_optarg_OPTION: Writing Testsuites. (line 62) * at_status: Writing Testsuites. (line 212) * autoconf: autoconf Invocation. (line 6) * Autoconf upgrading <1>: Autoconf 2.13. (line 6) * Autoconf upgrading: Autoconf 1. (line 6) * Autoconf version: Versioning. (line 6) * autoheader: autoheader Invocation. (line 6) * Autoheader macros: Autoheader Macros. (line 6) * autom4te debugging tips: Debugging via autom4te. (line 6) * Autom4te Library: autom4te Invocation. (line 225) * autom4te.cache: autom4te Invocation. (line 130) * autom4te.cfg: autom4te Invocation. (line 258) * Automake: Automake. (line 19) * Automatic remaking: Automatic Remaking. (line 6) * automatic rule rewriting and VPATH: Automatic Rule Rewriting. (line 6) * autopoint: autoreconf Invocation. (line 30) * autoreconf: autoreconf Invocation. (line 6) * autoscan: autoscan Invocation. (line 6) * Autotest: Using Autotest. (line 6) * AUTOTEST_PATH: testsuite Invocation. (line 60) * autoupdate: autoupdate Invocation. (line 6) * Back trace <1>: autom4te Invocation. (line 86) * Back trace: autoconf Invocation. (line 86) * balancing parentheses: Balancing Parentheses. (line 6) * Bash: Shellology. (line 43) * Bash 2.05 and later: Shellology. (line 49) * bindir: Installation Directory Variables. (line 15) * Bootstrap: Bootstrapping. (line 6) * BSD make and obj/: obj/ and Make. (line 6) * buffer overruns: Buffer Overruns. (line 6) * Build directories: Build Directories. (line 6) * builddir: Preset Output Variables. (line 174) * C function portability: Function Portability. (line 6) * C types: Types. (line 6) * Cache: Caching Results. (line 6) * Cache variable: Cache Variable Names. (line 6) * Cache, enabling: configure Invocation. (line 25) * Canonical system type: Canonicalizing. (line 6) * carriage return, deleting: Limitations of Usual Tools. (line 994) * CFLAGS: Preset Output Variables. (line 23) * changequote: Changequote is Evil. (line 6) * Coding style: Coding Style. (line 6) * Command Substitution: Shell Substitutions. (line 377) * command-line, macros set on: Command-line Macros and whitespace. (line 6) * Commands for configuration: Configuration Commands. (line 6) * Comments in Makefile macros: Comments in Make Macros. (line 6) * Comments in Makefile rules: Comments in Make Rules. (line 6) * Common autoconf behavior: Common Behavior. (line 6) * Compilers: Compilers and Preprocessors. (line 6) * composing variable names: Polymorphic Variables. (line 131) * config.h: Configuration Headers. (line 6) * config.h.bot: acconfig Header. (line 6) * config.h.in: Header Templates. (line 6) * config.h.top: acconfig Header. (line 6) * config.site: Site Defaults. (line 6) * config.status: config.status Invocation. (line 6) * config.sub: Specifying Target Triplets. (line 59) * CONFIG_COMMANDS: Obsolete config.status Use. (line 11) * CONFIG_FILES: Obsolete config.status Use. (line 15) * CONFIG_HEADERS: Obsolete config.status Use. (line 20) * CONFIG_LINKS: Obsolete config.status Use. (line 25) * CONFIG_SHELL: config.status Invocation. (line 102) * CONFIG_STATUS: config.status Invocation. (line 108) * Configuration actions: Configuration Actions. (line 6) * Configuration commands: Configuration Commands. (line 6) * Configuration file creation: Configuration Files. (line 6) * Configuration Header: Configuration Headers. (line 6) * Configuration Header Template: Header Templates. (line 6) * Configuration links: Configuration Links. (line 6) * configure <1>: Running configure Scripts. (line 6) * configure: Making configure Scripts. (line 6) * Configure subdirectories: Subdirectories. (line 6) * configure.ac: Making configure Scripts. (line 27) * configure.in: Making configure Scripts. (line 27) * configure_input: Preset Output Variables. (line 58) * Copyright Notice <1>: Writing Testsuites. (line 41) * Copyright Notice: Notices. (line 10) * CPPFLAGS: Preset Output Variables. (line 72) * Creating configuration files: Configuration Files. (line 6) * Creating temporary files: Limitations of Usual Tools. (line 621) * Cross compilation: Hosts and Cross-Compilation. (line 6) * CXXFLAGS: Preset Output Variables. (line 94) * Darwin: Systemology. (line 23) * Data structure, set: Set manipulation Macros. (line 6) * datadir: Installation Directory Variables. (line 18) * datarootdir <1>: Changed Directory Variables. (line 6) * datarootdir: Installation Directory Variables. (line 22) * debugging tips: Debugging via autom4te. (line 6) * Declaration, checking: Declarations. (line 6) * Default includes: Default Includes. (line 6) * DEFS: Preset Output Variables. (line 98) * deleting carriage return: Limitations of Usual Tools. (line 994) * Dependencies between macros: Dependencies Between Macros. (line 6) * Descriptors: File Descriptors. (line 6) * descriptors: File Descriptor Macros. (line 6) * Directories, build: Build Directories. (line 6) * Directories, installation: Installation Directory Variables. (line 6) * division, integer: Signed Integer Division. (line 6) * dnl <1>: Coding Style. (line 42) * dnl: Macro Definitions. (line 51) * docdir: Installation Directory Variables. (line 26) * double-colon rules and VPATH: VPATH and Double-colon. (line 6) * dvidir: Installation Directory Variables. (line 30) * ECHO_C: Preset Output Variables. (line 106) * ECHO_N: Preset Output Variables. (line 107) * ECHO_T: Preset Output Variables. (line 108) * Endianness: C Compiler. (line 184) * environment, macros set from: Command-line Macros and whitespace. (line 6) * Erlang: Erlang Compiler and Interpreter. (line 6) * Erlang, Library, checking: Erlang Libraries. (line 6) * ERLANG_INSTALL_LIB_DIR: Installation Directory Variables. (line 201) * ERLANG_INSTALL_LIB_DIR_: Installation Directory Variables. (line 206) * ERLCFLAGS: Preset Output Variables. (line 120) * exec_prefix: Installation Directory Variables. (line 33) * exiting portably: Exiting Portably. (line 6) * expanded before required: Expanded Before Required. (line 6) * explicit rules, $<, and VPATH: $< in Explicit Rules. (line 6) * External software: External Software. (line 6) * F77: Fortran Compiler. (line 6) * FCFLAGS: Preset Output Variables. (line 126) * FFLAGS: Preset Output Variables. (line 133) * FHS: Site Defaults. (line 83) * File descriptors: File Descriptors. (line 6) * file descriptors: File Descriptor Macros. (line 6) * File system conventions: File System Conventions. (line 6) * File, checking: Files. (line 6) * Filesystem Hierarchy Standard: Site Defaults. (line 83) * floating point: Floating Point Portability. (line 6) * Forbidden patterns: Forbidden Patterns. (line 6) * Fortran: Fortran Compiler. (line 6) * Function, checking: Particular Functions. (line 6) * Gettext: autoreconf Invocation. (line 30) * GNU build system: The GNU Build System. (line 6) * Gnulib: Gnulib. (line 11) * Go: Go Compiler. (line 6) * GOFLAGS: Preset Output Variables. (line 170) * Header portability: Header Portability. (line 6) * Header templates: Header Templates. (line 6) * Header, checking: Header Files. (line 6) * Help strings: Pretty Help Strings. (line 6) * Here-documents: Here-Documents. (line 6) * History of autoconf: History. (line 6) * htmldir: Installation Directory Variables. (line 40) * ifnames: ifnames Invocation. (line 6) * Imake: Why Not Imake. (line 6) * includedir: Installation Directory Variables. (line 43) * Includes, default: Default Includes. (line 6) * indirection, variable name: Polymorphic Variables. (line 6) * infodir: Installation Directory Variables. (line 46) * input: File Descriptor Macros. (line 6) * Install prefix: Default Prefix. (line 6) * Installation directories: Installation Directory Variables. (line 6) * Instantiation: Output. (line 13) * integer overflow <1>: Signed Overflow Advice. (line 6) * integer overflow <2>: Signed Overflow Examples. (line 6) * integer overflow <3>: Integer Overflow Basics. (line 6) * integer overflow: Integer Overflow. (line 6) * Introduction: Introduction. (line 6) * invoking the shell: Invoking the Shell. (line 6) * Korn shell: Shellology. (line 57) * Ksh: Shellology. (line 57) * Language: Language Choice. (line 6) * Large file support: System Services. (line 49) * LDFLAGS: Preset Output Variables. (line 140) * LFS: System Services. (line 49) * lib64: Site Defaults. (line 97) * libdir: Installation Directory Variables. (line 49) * libexecdir: Installation Directory Variables. (line 52) * Library, checking: Libraries. (line 6) * LIBS: Preset Output Variables. (line 154) * Libtool: Libtool. (line 14) * License: Distributing. (line 6) * Limitations of make: Portable Make. (line 6) * Limitations of shell builtins: Limitations of Builtins. (line 6) * Limitations of usual tools: Limitations of Usual Tools. (line 6) * Links: Configuration Links. (line 12) * Links for configuration: Configuration Links. (line 6) * Listing directories: Limitations of Usual Tools. (line 555) * localedir: Installation Directory Variables. (line 55) * localstatedir: Installation Directory Variables. (line 60) * loop induction: Optimization and Wraparound. (line 6) * low-level output: File Descriptor Macros. (line 6) * M4: Programming in M4. (line 6) * M4 quotation: M4 Quotation. (line 6) * M4sugar: Programming in M4sugar. (line 6) * m4sugar debugging tips: Debugging via autom4te. (line 6) * Macro invocation stack <1>: autom4te Invocation. (line 86) * Macro invocation stack: autoconf Invocation. (line 86) * Macros, called once: One-Shot Macros. (line 6) * Macros, obsoleting: Obsoleting Macros. (line 6) * Macros, ordering: Suggested Ordering. (line 6) * Macros, prerequisites: Prerequisite Macros. (line 6) * make -k: make -k Status. (line 6) * make and MAKEFLAGS: The Make Macro MAKEFLAGS. (line 6) * make and SHELL: The Make Macro SHELL. (line 6) * Makefile macros and comments: Comments in Make Macros. (line 6) * Makefile macros and whitespace: Trailing whitespace in Make Macros. (line 6) * Makefile rules and comments: Comments in Make Rules. (line 6) * Makefile rules and newlines: Newlines in Make Rules. (line 6) * Makefile substitutions: Makefile Substitutions. (line 6) * MAKEFLAGS and make: The Make Macro MAKEFLAGS. (line 6) * Making directories: Limitations of Usual Tools. (line 577) * mandir: Installation Directory Variables. (line 63) * Messages, from autoconf: Reporting Messages. (line 6) * Messages, from configure: Printing Messages. (line 6) * Messages, from M4sugar: Diagnostic Macros. (line 6) * Moving open files: Limitations of Usual Tools. (line 646) * newline, deleting: Limitations of Usual Tools. (line 994) * Newlines in Makefile rules: Newlines in Make Rules. (line 6) * Notices in configure: Notices. (line 6) * null pointers: Null Pointers. (line 6) * obj/, subdirectory: obj/ and Make. (line 6) * OBJCFLAGS: Preset Output Variables. (line 162) * OBJCXXFLAGS: Preset Output Variables. (line 166) * Obsolete constructs: Obsolete Constructs. (line 6) * Obsoleting macros: Obsoleting Macros. (line 6) * obstack: Particular Functions. (line 319) * oldincludedir: Installation Directory Variables. (line 66) * One-shot macros: One-Shot Macros. (line 6) * Options, Package: Option Checking. (line 6) * Options, package: Package Options. (line 6) * Ordering macros: Suggested Ordering. (line 6) * Output variables <1>: Setting Output Variables. (line 6) * Output variables: Preset Output Variables. (line 6) * Output variables, special characters in: Special Chars in Variables. (line 6) * output, low-level: File Descriptor Macros. (line 6) * Outputting files: Output. (line 6) * overflow, signed integer <1>: Signed Overflow Advice. (line 6) * overflow, signed integer <2>: Signed Overflow Examples. (line 6) * overflow, signed integer <3>: Integer Overflow Basics. (line 6) * overflow, signed integer: Integer Overflow. (line 6) * Package options: Package Options. (line 6) * package.m4: Making testsuite Scripts. (line 12) * Parallel make: Parallel Make. (line 6) * parentheses, balancing: Balancing Parentheses. (line 6) * Patterns, forbidden: Forbidden Patterns. (line 6) * pdfdir: Installation Directory Variables. (line 69) * polymorphic variable name: Polymorphic Variables. (line 6) * portability: Varieties of Unportability. (line 6) * Portability of C functions: Function Portability. (line 6) * Portability of headers: Header Portability. (line 6) * Portable C and C++ programming: Portable C and C++. (line 6) * Portable shell programming: Portable Shell. (line 6) * positional parameters: Shell Substitutions. (line 121) * Posix termios headers: System Services. (line 75) * Precious Variable: Setting Output Variables. (line 65) * prefix: Installation Directory Variables. (line 72) * Prefix for install: Default Prefix. (line 6) * preprocessor arithmetic: Preprocessor Arithmetic. (line 6) * Preprocessors: Compilers and Preprocessors. (line 6) * prerequisite directories and VPATH: Tru64 Directory Magic. (line 6) * Prerequisite macros: Prerequisite Macros. (line 6) * Program names, transforming: Transforming Names. (line 6) * Programs, checking: Alternative Programs. (line 6) * psdir: Installation Directory Variables. (line 77) * QNX 4.25: Systemology. (line 37) * quadrigraphs: Quadrigraphs. (line 6) * quotation <1>: M4 Quotation. (line 6) * quotation: Autoconf Language. (line 6) * Remaking automatically: Automatic Remaking. (line 6) * Revision: Notices. (line 18) * Rule, Single Suffix Inference: Single Suffix Rules. (line 6) * sbindir: Installation Directory Variables. (line 80) * Separated Dependencies: Single Suffix Rules. (line 9) * set -b: Limitations of Builtins. (line 689) * set -e: Limitations of Builtins. (line 605) * set -m: Limitations of Builtins. (line 689) * set -n: Limitations of Builtins. (line 713) * Set manipulation: Set manipulation Macros. (line 6) * sharedstatedir: Installation Directory Variables. (line 84) * SHELL and make: The Make Macro SHELL. (line 6) * Shell assignments: Assignments. (line 6) * Shell builtins: Limitations of Builtins. (line 6) * Shell file descriptors: File Descriptors. (line 6) * Shell Functions: Shell Functions. (line 6) * Shell here-documents: Here-Documents. (line 6) * shell invocation: Invoking the Shell. (line 6) * Shell parentheses: Parentheses. (line 6) * Shell pattern matching: Shell Pattern Matching. (line 6) * Shell slashes: Slashes. (line 6) * Shell substitutions: Shell Substitutions. (line 6) * Shell variables: Special Shell Variables. (line 6) * Shellology: Shellology. (line 6) * Signal handling in the shell: Signal Handling. (line 6) * Signals, shells and: Signal Handling. (line 6) * signed integer overflow <1>: Signed Overflow Advice. (line 6) * signed integer overflow <2>: Signed Overflow Examples. (line 6) * signed integer overflow <3>: Integer Overflow Basics. (line 6) * signed integer overflow: Integer Overflow. (line 6) * Single Suffix Inference Rule: Single Suffix Rules. (line 6) * Site defaults: Site Defaults. (line 6) * Site details: Site Details. (line 6) * Special shell variables: Special Shell Variables. (line 6) * srcdir <1>: Preset Output Variables. (line 195) * srcdir: Configuration Actions. (line 71) * standard input: File Descriptor Macros. (line 6) * Standard symbols: Standard Symbols. (line 6) * Structure, checking: Structures. (line 6) * Subdirectory configure: Subdirectories. (line 6) * Substitutions in makefiles: Makefile Substitutions. (line 6) * Symbolic links: Limitations of Usual Tools. (line 543) * sysconfdir: Installation Directory Variables. (line 88) * System type <1>: Canonicalizing. (line 6) * System type: Specifying Target Triplets. (line 6) * Systemology: Systemology. (line 6) * Target triplet: Specifying Target Triplets. (line 6) * termios Posix headers: System Services. (line 75) * test group: testsuite Scripts. (line 12) * testsuite <1>: testsuite Invocation. (line 6) * testsuite: testsuite Scripts. (line 6) * timestamp resolution <1>: Timestamps and Make. (line 6) * timestamp resolution: Limitations of Usual Tools. (line 226) * tmp: Configuration Actions. (line 89) * top_build_prefix: Preset Output Variables. (line 184) * top_builddir: Preset Output Variables. (line 180) * top_srcdir: Preset Output Variables. (line 202) * Transforming program names: Transforming Names. (line 6) * Tru64: Systemology. (line 44) * Types: Types. (line 6) * unbalanced parentheses, managing: Balancing Parentheses. (line 6) * undefined macro: New Macros. (line 6) * Unix version 7: Systemology. (line 49) * Unordered set manipulation: Set manipulation Macros. (line 6) * Upgrading autoconf <1>: Autoconf 2.13. (line 6) * Upgrading autoconf: Autoconf 1. (line 6) * V7: Systemology. (line 49) * variable name indirection: Polymorphic Variables. (line 6) * variable names, composing: Polymorphic Variables. (line 131) * Variable, Precious: Setting Output Variables. (line 65) * variables and VPATH: Variables listed in VPATH. (line 6) * Version: Versioning. (line 11) * version, Autoconf: Versioning. (line 6) * volatile objects: Volatile Objects. (line 6) * VPATH: VPATH and Make. (line 6) * VPATH and automatic rule rewriting: Automatic Rule Rewriting. (line 6) * VPATH and double-colon rules: VPATH and Double-colon. (line 6) * VPATH and prerequisite directories: Tru64 Directory Magic. (line 6) * VPATH and variables: Variables listed in VPATH. (line 6) * VPATH, explicit rules, and $<: $< in Explicit Rules. (line 6) * VPATH, resolving target pathnames: Make Target Lookup. (line 6) * whitespace in command-line macros: Command-line Macros and whitespace. (line 6) * whitespace in Makefile macros: Trailing whitespace in Make Macros. (line 6) * wraparound arithmetic <1>: Signed Overflow Advice. (line 6) * wraparound arithmetic <2>: Signed Overflow Examples. (line 6) * wraparound arithmetic <3>: Integer Overflow Basics. (line 6) * wraparound arithmetic: Integer Overflow. (line 6) * X Window System: System Services. (line 10) * Zsh: Shellology. (line 87)  Tag Table: Node: Top1954 Node: Introduction21371 Node: The GNU Build System27935 Node: Automake28914 Node: Gnulib30863 Node: Libtool32172 Node: Pointers33594 Ref: Pointers-Footnote-134895 Node: Making configure Scripts35055 Node: Writing Autoconf Input38404 Node: Shell Script Compiler39867 Node: Autoconf Language42228 Node: Autoconf Input Layout49397 Node: autoscan Invocation50805 Node: ifnames Invocation53361 Node: autoconf Invocation54561 Node: autoreconf Invocation59846 Node: Setup64607 Node: Initializing configure65929 Ref: AC_INIT66434 Node: Versioning69318 Node: Notices71179 Node: Input72354 Ref: AC_CONFIG_SRCDIR72495 Node: Output75442 Ref: AC_OUTPUT75877 Ref: AC_PROG_MAKE_SET77495 Node: Configuration Actions77920 Node: Configuration Files83208 Ref: AC_CONFIG_FILES83469 Node: Makefile Substitutions84688 Node: Preset Output Variables86431 Node: Installation Directory Variables95945 Node: Changed Directory Variables103793 Node: Build Directories106387 Node: Automatic Remaking108242 Node: Configuration Headers110410 Node: Header Templates113712 Node: autoheader Invocation116447 Node: Autoheader Macros120089 Node: Configuration Commands122354 Ref: AC_CONFIG_COMMANDS122866 Node: Configuration Links124151 Ref: AC_CONFIG_LINKS124602 Node: Subdirectories125575 Node: Default Prefix128055 Ref: AC_PREFIX_PROGRAM128946 Node: Existing Tests129477 Node: Common Behavior131279 Node: Standard Symbols131918 Node: Default Includes132499 Node: Alternative Programs134753 Node: Particular Programs135439 Ref: AC_PROG_LEX141187 Ref: AC_PROG_LN_S143798 Node: Generic Programs145416 Ref: AC_CHECK_PROG146388 Ref: AC_CHECK_PROGS147114 Ref: AC_PATH_PROG151114 Ref: AC_PATH_PROGS151488 Node: Files154567 Node: Libraries155767 Ref: AC_CHECK_LIB156008 Ref: AC_SEARCH_LIBS158267 Node: Library Functions159451 Node: Function Portability160074 Node: Particular Functions169586 Ref: AC_FUNC_ALLOCA169917 Ref: AC_FUNC_CLOSEDIR_VOID172306 Ref: AC_FUNC_FORK174296 Ref: AC_FUNC_GETLOADAVG176338 Ref: AC_FUNC_GETMNTENT177903 Ref: AC_FUNC_MMAP182145 Ref: AC_FUNC_STRCOLL185000 Ref: AC_FUNC_STRFTIME185975 Ref: AC_FUNC_UTIME_NULL187257 Ref: AC_FUNC_VPRINTF187605 Node: Generic Functions188821 Ref: AC_CHECK_FUNC189347 Ref: AC_CHECK_FUNCS189976 Node: Header Files194602 Node: Header Portability195235 Node: Particular Headers198330 Ref: AC_HEADER_DIRENT199369 Ref: AC_HEADER_MAJOR200899 Ref: AC_HEADER_STAT201683 Ref: AC_HEADER_STDC203189 Ref: AC_HEADER_TIME207928 Node: Generic Headers209315 Ref: AC_CHECK_HEADER209715 Ref: AC_CHECK_HEADERS211588 Node: Declarations214153 Node: Particular Declarations214749 Node: Generic Declarations214973 Ref: AC_CHECK_DECLS216358 Node: Structures218884 Node: Particular Structures219499 Ref: AC_STRUCT_ST_BLOCKS220568 Ref: AC_STRUCT_TIMEZONE221264 Node: Generic Structures221593 Ref: AC_CHECK_MEMBERS222584 Node: Types223417 Node: Particular Types223937 Ref: AC_TYPE_GETGROUPS224380 Ref: AC_TYPE_MODE_T227416 Ref: AC_TYPE_OFF_T227599 Ref: AC_TYPE_PID_T227779 Ref: AC_TYPE_SIZE_T227959 Ref: AC_TYPE_UID_T228328 Node: Generic Types229973 Node: Compilers and Preprocessors232128 Node: Specific Compiler Characteristics233402 Node: Generic Compiler Characteristics234507 Ref: AC_CHECK_SIZEOF234747 Node: C Compiler239537 Ref: AC_PROG_CC_C_O243988 Ref: AC_C_BIGENDIAN247796 Ref: AC_C_CONST249637 Ref: AC_C_INLINE252955 Ref: AC_C_CHAR_UNSIGNED253178 Ref: AC_PROG_GCC_TRADITIONAL255800 Node: C++ Compiler256212 Node: Objective C Compiler258609 Node: Objective C++ Compiler259983 Node: Erlang Compiler and Interpreter261433 Node: Fortran Compiler263478 Node: Go Compiler288878 Node: System Services289923 Ref: AC_PATH_X290168 Ref: AC_PATH_XTRA291161 Ref: AC_SYS_INTERPRETER291738 Ref: AC_SYS_LONG_FILE_NAMES293150 Node: Posix Variants293527 Ref: AC_USE_SYSTEM_EXTENSIONS293827 Node: Erlang Libraries294903 Node: Writing Tests299841 Node: Language Choice301865 Ref: AC_LANG302362 Ref: AC_LANG_PUSH304161 Ref: Language Choice-Footnote-1306034 Node: Writing Test Programs306190 Node: Guidelines306768 Node: Test Functions309028 Node: Generating Sources310426 Node: Running the Preprocessor316510 Ref: AC_PREPROC_IFELSE317242 Ref: AC_EGREP_HEADER319172 Ref: AC_EGREP_CPP319501 Node: Running the Compiler319926 Node: Running the Linker321681 Ref: AC_LINK_IFELSE322821 Node: Runtime323697 Ref: AC_RUN_IFELSE324472 Node: Systemology329322 Node: Multiple Cases331671 Node: Results333372 Node: Defining Symbols334191 Node: Setting Output Variables339082 Node: Special Chars in Variables344973 Node: Caching Results346233 Node: Cache Variable Names349951 Node: Cache Files351602 Node: Cache Checkpointing353927 Node: Printing Messages355301 Ref: AC_MSG_RESULT356815 Ref: AC_MSG_NOTICE357322 Ref: AC_MSG_ERROR357686 Ref: AC_MSG_WARN358519 Node: Programming in M4358942 Node: M4 Quotation359747 Node: Active Characters360716 Ref: Active Characters-Footnote-1362106 Ref: Active Characters-Footnote-2362220 Node: One Macro Call362242 Node: Quoting and Parameters363798 Node: Quotation and Nested Macros366134 Node: Changequote is Evil369144 Node: Quadrigraphs371674 Node: Balancing Parentheses374356 Node: Quotation Rule Of Thumb378450 Node: Using autom4te381348 Ref: Using autom4te-Footnote-1381999 Node: autom4te Invocation382048 Node: Customizing autom4te390550 Node: Programming in M4sugar391831 Node: Redefined M4 Macros393012 Node: Diagnostic Macros401342 Ref: m4_fatal402095 Ref: m4_warn402334 Node: Diversion support403102 Node: Conditional constructs410888 Node: Looping constructs417742 Ref: m4_foreach_w421354 Node: Evaluation Macros428706 Node: Text processing Macros437395 Node: Number processing Macros447105 Ref: m4_version_compare449057 Node: Set manipulation Macros451364 Node: Forbidden Patterns460480 Node: Debugging via autom4te461971 Node: Programming in M4sh463790 Node: Common Shell Constructs465163 Node: Polymorphic Variables473136 Node: Initialization Macros482725 Node: File Descriptor Macros488314 Ref: AS_MESSAGE_LOG_FD489466 Node: Writing Autoconf Macros490968 Node: Macro Definitions491773 Node: Macro Names495452 Node: Reporting Messages499213 Node: Dependencies Between Macros501057 Node: Prerequisite Macros501752 Node: Suggested Ordering507827 Node: One-Shot Macros509370 Node: Obsoleting Macros510723 Ref: AU_DEFUN511477 Node: Coding Style512506 Node: Portable Shell520313 Node: Shellology524621 Node: Invoking the Shell528792 Node: Here-Documents529974 Node: File Descriptors533594 Node: Signal Handling540032 Node: File System Conventions545240 Node: Shell Pattern Matching551052 Node: Shell Substitutions551616 Node: Assignments569492 Node: Parentheses571383 Node: Slashes572340 Node: Special Shell Variables573194 Node: Shell Functions586526 Node: Limitations of Builtins589933 Ref: case593955 Ref: echo599113 Ref: export606087 Ref: if609507 Ref: set613318 Ref: trap625040 Ref: unset628851 Node: Limitations of Usual Tools629946 Ref: awk630245 Ref: grep648349 Ref: mkdir653981 Ref: sed659801 Ref: touch670932 Node: Portable Make674207 Node: $< in Ordinary Make Rules675869 Node: Failure in Make Rules676335 Node: Special Chars in Names677363 Node: Backslash-Newline-Empty678335 Node: Backslash-Newline Comments679367 Node: Long Lines in Makefiles680256 Node: Macros and Submakes680632 Node: The Make Macro MAKEFLAGS683319 Node: The Make Macro SHELL684204 Node: Parallel Make686703 Node: Comments in Make Rules690387 Node: Newlines in Make Rules691557 Node: Comments in Make Macros692602 Node: Trailing whitespace in Make Macros693812 Node: Command-line Macros and whitespace694563 Node: obj/ and Make695233 Node: make -k Status695884 Node: VPATH and Make696506 Node: Variables listed in VPATH697830 Node: VPATH and Double-colon698369 Node: $< in Explicit Rules698775 Node: Automatic Rule Rewriting699242 Node: Tru64 Directory Magic705924 Node: Make Target Lookup706750 Node: Single Suffix Rules711192 Node: Timestamps and Make712538 Node: Portable C and C++714223 Node: Varieties of Unportability715864 Node: Integer Overflow717961 Node: Integer Overflow Basics718974 Node: Signed Overflow Examples720722 Node: Optimization and Wraparound724224 Node: Signed Overflow Advice727186 Node: Signed Integer Division729860 Node: Preprocessor Arithmetic730471 Node: Null Pointers731220 Node: Buffer Overruns731854 Node: Volatile Objects734643 Node: Floating Point Portability740321 Node: Exiting Portably740828 Node: Manual Configuration742304 Node: Specifying Target Triplets743137 Ref: Specifying Names743310 Node: Canonicalizing746185 Node: Using System Type748448 Node: Site Configuration751252 Node: Help Formatting752224 Node: External Software753168 Ref: AC_ARG_WITH754714 Node: Package Options759039 Ref: AC_ARG_ENABLE760494 Node: Pretty Help Strings761655 Ref: AS_HELP_STRING762241 Node: Option Checking764582 Node: Site Details766310 Node: Transforming Names767539 Node: Transformation Options768621 Node: Transformation Examples769098 Node: Transformation Rules770819 Node: Site Defaults772365 Node: Running configure Scripts777706 Node: Basic Installation778771 Node: Compilers and Options782868 Node: Multiple Architectures783522 Node: Installation Names785102 Node: Optional Features787997 Node: Particular Systems789351 Node: System Type790775 Node: Sharing Defaults792103 Node: Defining Variables792741 Node: configure Invocation793639 Node: config.status Invocation795345 Ref: CONFIG_SHELL799092 Node: Obsolete Constructs800258 Node: Obsolete config.status Use801221 Node: acconfig Header802999 Node: autoupdate Invocation805021 Node: Obsolete Macros806887 Ref: AC_FUNC_SETVBUF_REVERSED814529 Ref: AC_TYPE_SIGNAL831075 Node: Autoconf 1834053 Node: Changed File Names835119 Node: Changed Makefiles835869 Node: Changed Macros836957 Node: Changed Results838211 Node: Changed Macro Writing840335 Node: Autoconf 2.13841615 Node: Changed Quotation842823 Node: New Macros844741 Node: Hosts and Cross-Compilation846536 Node: AC_LIBOBJ vs LIBOBJS850691 Node: AC_ACT_IFELSE vs AC_TRY_ACT852306 Ref: AC_FOO_IFELSE vs AC_TRY_FOO852495 Node: Using Autotest854308 Node: Using an Autotest Test Suite856712 Node: testsuite Scripts857003 Node: Autotest Logs861485 Node: Writing Testsuites863826 Node: testsuite Invocation880858 Node: Making testsuite Scripts886205 Node: FAQ891343 Node: Distributing892203 Node: Why GNU M4893252 Node: Bootstrapping894121 Node: Why Not Imake894731 Node: Defining Directories899482 Node: Autom4te Cache901640 Node: Present But Cannot Be Compiled903478 Node: Expanded Before Required907195 Node: Debugging912093 Node: History917116 Node: Genesis917985 Node: Exodus919163 Node: Leviticus922208 Node: Numbers923736 Node: Deuteronomy925651 Node: GNU Free Documentation License928322 Node: Indices953487 Node: Environment Variable Index954206 Node: Output Variable Index965546 Node: Preprocessor Symbol Index982426 Node: Cache Variable Index1000695 Node: Autoconf Macro Index1011383 Node: M4 Macro Index1045712 Node: Autotest Macro Index1066462 Node: Program & Function Index1068865 Node: Concept Index1089579  End Tag Table