# Makefile.in generated by automake 1.15.1 from Makefile.am. # utils/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994-2017 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # This is _NOT_ the library release version, it's an API version. # Please read Chapter 6 "Library interface versions" of the libtool # documentation before making any modification # # http://sources.redhat.com/autobook/autobook/autobook_91.html # # The version scheme used by Libtool tracks interfaces, where an interface # is the set of exported entry points into the library. All Libtool libraries # start with `-version-info' set to `0:0:0' -- this will be the default # version number if you don't explicitly set it on the Libtool link command # line. The meaning of these numbers (from left to right) is as follows: # # current # The number of the current interface exported by the library. A current # value of `0', means that you are calling the interface exported by this # library interface 0. # # revision # The implementation number of the most recent interface exported by this # library. In this case, a revision value of `0' means that this is the # first implementation of the interface. # # If the next release of this library exports the same interface, but has # a different implementation (perhaps some bugs have been fixed), the # revision number will be higher, but current number will be the same. # In that case, when given a choice, the library with the highest revision # will always be used by the runtime loader. # # age # The number of previous additional interfaces supported by this library. # If age were `2', then this library can be linked into executables which # were built with a release of this library that exported the current # interface number, current, or any of the previous two interfaces. # # By definition age must be less than or equal to current. At the outset, # only the first ever interface is implemented, so age can only be `0'. # # 1. If you have changed any of the sources for this library, the revision # number must be incremented. # This is a new revision of the current interface. # # 2. If the interface has changed, then current must be incremented, and # revision reset to `0'. # This is the first revision of a new interface. # # 3. If the new interface is a superset of the previous interface (that is, # if the previous interface has not been broken by the changes in this # new release), then age must be incremented. # This release is backwards compatible with the previous release. # # 4. If the new interface has removed elements with respect to the previous # interface, then you have broken backward compatibility and age must be # reset to `0'. # This release has a new, but backwards incompatible interface. # # For example, if the next release of the library included some new commands # for an existing socket protocol, you would use -version-info 1:0:1. # This is the first revision of a new interface. This release is backwards # compatible with the previous release. # # Later, you implement a faster way of handling part of the algorithm at the # core of the library, and release it with -version-info 1:1:1. This is a new # revision of the current interface. # # Unfortunately the speed of your new implementation can only be fully # exploited by changing the API to access the structures at a lower level, # which breaks compatibility with the previous interface, so you release it # as -version-info 2:0:0. This release has a new, but backwards incompatible # interface. am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/ipset pkgincludedir = $(includedir)/ipset pkglibdir = $(libdir)/ipset pkglibexecdir = $(libexecdir)/ipset am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-pc-linux-gnu host_triplet = mips-openwrt-linux-gnu #am__append_1 = -g -g3 -ggdb -gdwarf-2 -DIPSET_DEBUG -Wall -Werror am__append_2 = -O2 -DNDEBUG subdir = utils ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/argz.m4 \ $(top_srcdir)/m4/ax_cflags_gcc_option.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(dist_bashcomp_DATA) \ $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_0) am__v_P_ = $(am__v_P_0) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_0) am__v_GEN_ = $(am__v_GEN_0) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_0) am__v_at_ = $(am__v_at_0) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(bashcompdir)" DATA = $(dist_bashcomp_DATA) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/Make_global.am DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} /home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/ipset-7.3/build-aux/missing aclocal-1.15 AMTAR = $${TAR-tar} AM_DEFAULT_VERBOSITY = 0 AR = mips-openwrt-linux-musl-gcc-ar ARGZ_H = argz.h AUTOCONF = ${SHELL} /home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/ipset-7.3/build-aux/missing autoconf AUTOHEADER = ${SHELL} /home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/ipset-7.3/build-aux/missing autoheader AUTOMAKE = ${SHELL} /home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/ipset-7.3/build-aux/missing automake-1.15 AWK = gawk CC = mips-openwrt-linux-musl-gcc CCDEPMODE = depmode=gcc3 CFLAGS = -Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -mips16 -minterlink-mips16 -iremap/home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/ipset-7.3:ipset-7.3 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro CPP = mips-openwrt-linux-musl-gcc -E CPPFLAGS = -I/home/user/librerouteros-C7/staging_dir/target-mips_24kc_musl/usr/include -I/home/user/librerouteros-C7/staging_dir/target-mips_24kc_musl/include -I/home/user/librerouteros-C7/staging_dir/toolchain-mips_24kc_gcc-7.5.0_musl/usr/include -I/home/user/librerouteros-C7/staging_dir/toolchain-mips_24kc_gcc-7.5.0_musl/include/fortify -I/home/user/librerouteros-C7/staging_dir/toolchain-mips_24kc_gcc-7.5.0_musl/include CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = false DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /home/user/librerouteros-C7/staging_dir/host/bin/grep -E EXEEXT = FGREP = /home/user/librerouteros-C7/staging_dir/host/bin/grep -F GREP = /home/user/librerouteros-C7/staging_dir/host/bin/grep HAVE_CHECKENTRY_BOOL = undef HAVE_ETHER_ADDR_COPY = define HAVE_ETHER_ADDR_EQUAL = define HAVE_EXPORT_H = define HAVE_EXPORT_SYMBOL_GPL_IN_MODULE_H = undef HAVE_IPV6_SKIP_EXTHDR_ARGS = 4 HAVE_IS_ZERO_ETHER_ADDR = define HAVE_KVCALLOC = undef HAVE_KVFREE = define HAVE_LIST_LAST_ENTRY = define HAVE_LIST_NEXT_ENTRY = define HAVE_LOCKDEP_NFNL_IS_HELD = define HAVE_NETLINK_DUMP_START_ARGS = 4 HAVE_NETLINK_EXTENDED_ACK = define HAVE_NET_IN_NFNL_CALLBACK_FN = define HAVE_NET_IN_XT_ACTION_PARAM = undef HAVE_NET_OPS_ASYNC = undef HAVE_NET_OPS_ID = define HAVE_NFNL_LOCK_SUBSYS = define HAVE_NFNL_MSG_TYPE = define HAVE_NF_BRIDGE_GET_PHYSDEV = define HAVE_NLA_PUT_64BIT = define HAVE_NLA_PUT_BE16 = define HAVE_NLA_PUT_BE64 = define HAVE_NLA_PUT_IN_ADDR = define HAVE_NL_INFO_PORTID = define HAVE_NS_CAPABLE = define HAVE_PASSING_EXTENDED_ACK_TO_CALLBACKS = define HAVE_PASSING_EXTENDED_ACK_TO_PARSERS = define HAVE_RBTREE_POSTORDER_FOR_EACH_ENTRY_SAFE = define HAVE_STATE_IN_XT_ACTION_PARAM = define HAVE_STRSCPY = define HAVE_STRUCT_XT_ACTION_PARAM = define HAVE_TCF_EMATCH_OPS_CHANGE_ARG_NET = define HAVE_TCF_EMATCH_STRUCT_NET = define HAVE_TC_SKB_PROTOCOL = define HAVE_TIMER_SETUP = define HAVE_TYPEDEF_SCTP_SCTPHDR_T = undef HAVE_USER_NS_IN_STRUCT_NET = define HAVE_VZALLOC = define HAVE_XT_FAMILY = define HAVE_XT_MTCHK_PARAM_STRUCT_NET = define HAVE_XT_NET = define HAVE_XT_TARGET_PARAM = undef INCLTDL = INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s KBUILDDIR = /home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/linux-4.14.241 LD = mips-openwrt-linux-musl-ld LDFLAGS = -L/home/user/librerouteros-C7/staging_dir/target-mips_24kc_musl/usr/lib -L/home/user/librerouteros-C7/staging_dir/target-mips_24kc_musl/lib -L/home/user/librerouteros-C7/staging_dir/toolchain-mips_24kc_gcc-7.5.0_musl/usr/lib -L/home/user/librerouteros-C7/staging_dir/toolchain-mips_24kc_gcc-7.5.0_musl/lib -znow -zrelro -Wl,--gc-sections,--as-needed LIBADD_DL = LIBADD_DLD_LINK = LIBADD_DLOPEN = LIBADD_SHL_LOAD = LIBLTDL = -lltdl LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = LN_S = ln -s LTDLDEPS = LTDLINCL = LTDLOPEN = libltdl LTLIBOBJS = LT_CONFIG_H = config.h LT_DLLOADERS = libltdl/dlopen.la LT_DLPREOPEN = -dlpreopen libltdl/dlopen.la MAKEINFO = ${SHELL} /home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/ipset-7.3/build-aux/missing makeinfo MANIFEST_TOOL = : MAXSETS = MKDIR_P = /bin/mkdir -p NM = mips-openwrt-linux-musl-gcc-nm NMEDIT = OBJDUMP = mips-openwrt-linux-musl-objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = ipset PACKAGE_BUGREPORT = kadlec@netfilter.org PACKAGE_NAME = ipset PACKAGE_STRING = ipset 7.3 PACKAGE_TARNAME = ipset PACKAGE_URL = PACKAGE_VERSION = 7.3 PATH_SEPARATOR = : PKG_CONFIG = /home/user/librerouteros-C7/staging_dir/host/bin/pkg-config PKG_CONFIG_LIBDIR = /home/user/librerouteros-C7/staging_dir/target-mips_24kc_musl/usr/lib/pkgconfig:/home/user/librerouteros-C7/staging_dir/target-mips_24kc_musl/usr/share/pkgconfig PKG_CONFIG_PATH = /home/user/librerouteros-C7/staging_dir/target-mips_24kc_musl/usr/lib/pkgconfig:/home/user/librerouteros-C7/staging_dir/target-mips_24kc_musl/usr/share/pkgconfig RANLIB = mips-openwrt-linux-musl-gcc-ranlib SED = /home/user/librerouteros-C7/staging_dir/host/bin/sed SETTYPE_MODLIST = SET_MAKE = SHELL = /bin/bash STRIP = mips-openwrt-linux-musl-strip VERSION = 7.3 abs_builddir = /home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/ipset-7.3/utils abs_srcdir = /home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/ipset-7.3/utils abs_top_builddir = /home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/ipset-7.3 abs_top_srcdir = /home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/ipset-7.3 ac_ct_AR = ac_ct_CC = ac_ct_DUMPBIN = am__include = include am__leading_dot = . am__quote = am__tar = tar --format=posix -chf - "$$tardir" am__untar = tar -xf - bashcompdir = bindir = /usr/bin build = x86_64-pc-linux-gnu build_alias = x86_64-pc-linux-gnu build_cpu = x86_64 build_os = linux-gnu build_vendor = pc builddir = . datadir = /usr/share datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = /usr host = mips-openwrt-linux-gnu host_alias = mips-openwrt-linux host_cpu = mips host_os = linux-gnu host_vendor = openwrt htmldir = ${docdir} includedir = ${prefix}/include infodir = /usr/info install_sh = ${SHELL} /home/user/librerouteros-C7/build_dir/target-mips_24kc_musl/linux-ath79_generic/ipset-7.3/build-aux/install-sh libdir = ${exec_prefix}/lib libexecdir = /usr/lib libmnl_CFLAGS = -I/home/user/librerouteros-C7/staging_dir/target-mips_24kc_musl/usr/include libmnl_LIBS = -L/home/user/librerouteros-C7/staging_dir/target-mips_24kc_musl/usr/lib -lmnl localedir = ${datarootdir}/locale localstatedir = /var ltdl_LIBOBJS = libltdl/argz.o ltdl_LTLIBOBJS = libltdl/argz.lo mandir = /usr/man mkdir_p = $(MKDIR_P) oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr program_transform_name = s&$$&&;s&^&& psdir = ${docdir} sbindir = /usr/sbin sharedstatedir = ${prefix}/com srcdir = . sys_symbol_underscore = no sysconfdir = /etc target_alias = mips-openwrt-linux top_build_prefix = ../ top_builddir = .. top_srcdir = .. # curr:rev:age LIBVERSION = 14:0:1 AM_CPPFLAGS = $(kinclude_CFLAGS) $(all_includes) -I$(top_srcdir)/include AM_CFLAGS = -std=gnu99 $(am__append_1) $(am__append_2) SPARSE = sparse SPARSE_FLAGS = -Wsparse-all -I../include $(SPARSE_EXT_FLAGS) IPSET_AM_V_CHECK = $(ipset_am__v_CHECK_$(V)) ipset_am__v_CHECK_ = $(ipset_am__v_CHECK_$(AM_DEFAULT_VERBOSITY)) ipset_am__v_CHECK_0 = @echo " CHECK " $<; dist_bashcomp_DATA = ipset_bash_completion/ipset all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/Make_global.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign utils/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign utils/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_srcdir)/Make_global.am $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-dist_bashcompDATA: $(dist_bashcomp_DATA) @$(NORMAL_INSTALL) @list='$(dist_bashcomp_DATA)'; test -n "$(bashcompdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(bashcompdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(bashcompdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(bashcompdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(bashcompdir)" || exit $$?; \ done uninstall-dist_bashcompDATA: @$(NORMAL_UNINSTALL) @list='$(dist_bashcomp_DATA)'; test -n "$(bashcompdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(bashcompdir)'; $(am__uninstall_files_from_dir) tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(bashcompdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dist_bashcompDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-dist_bashcompDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-dist_bashcompDATA install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ uninstall-am uninstall-dist_bashcompDATA .PRECIOUS: Makefile # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: