/* * Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 2000 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that: (1) source code distributions * retain the above copyright notice and this paragraph in its entirety, (2) * distributions including binary code include the above copyright notice and * this paragraph in its entirety in the documentation or other materials * provided with the distribution, and (3) all advertising materials mentioning * features or use of this software display the following acknowledgement: * ``This product includes software developed by the University of California, * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of * the University nor the names of its contributors may be used to endorse * or promote products derived from this software without specific prior * written permission. * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. */ /* \summary: Ethernet printer */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include "netdissect.h" #include "extract.h" #include "addrtoname.h" #include "ethertype.h" #include "ether.h" const struct tok ethertype_values[] = { { ETHERTYPE_IP, "IPv4" }, { ETHERTYPE_MPLS, "MPLS unicast" }, { ETHERTYPE_MPLS_MULTI, "MPLS multicast" }, { ETHERTYPE_IPV6, "IPv6" }, { ETHERTYPE_8021Q, "802.1Q" }, { ETHERTYPE_8021Q9100, "802.1Q-9100" }, { ETHERTYPE_8021QinQ, "802.1Q-QinQ" }, { ETHERTYPE_8021Q9200, "802.1Q-9200" }, { ETHERTYPE_VMAN, "VMAN" }, { ETHERTYPE_PUP, "PUP" }, { ETHERTYPE_ARP, "ARP"}, { ETHERTYPE_REVARP, "Reverse ARP"}, { ETHERTYPE_NS, "NS" }, { ETHERTYPE_SPRITE, "Sprite" }, { ETHERTYPE_TRAIL, "Trail" }, { ETHERTYPE_MOPDL, "MOP DL" }, { ETHERTYPE_MOPRC, "MOP RC" }, { ETHERTYPE_DN, "DN" }, { ETHERTYPE_LAT, "LAT" }, { ETHERTYPE_SCA, "SCA" }, { ETHERTYPE_TEB, "TEB" }, { ETHERTYPE_LANBRIDGE, "Lanbridge" }, { ETHERTYPE_DECDNS, "DEC DNS" }, { ETHERTYPE_DECDTS, "DEC DTS" }, { ETHERTYPE_VEXP, "VEXP" }, { ETHERTYPE_VPROD, "VPROD" }, { ETHERTYPE_ATALK, "Appletalk" }, { ETHERTYPE_AARP, "Appletalk ARP" }, { ETHERTYPE_IPX, "IPX" }, { ETHERTYPE_PPP, "PPP" }, { ETHERTYPE_MPCP, "MPCP" }, { ETHERTYPE_SLOW, "Slow Protocols" }, { ETHERTYPE_PPPOED, "PPPoE D" }, { ETHERTYPE_PPPOES, "PPPoE S" }, { ETHERTYPE_EAPOL, "EAPOL" }, { ETHERTYPE_RRCP, "RRCP" }, { ETHERTYPE_MS_NLB_HB, "MS NLB heartbeat" }, { ETHERTYPE_JUMBO, "Jumbo" }, { ETHERTYPE_LOOPBACK, "Loopback" }, { ETHERTYPE_ISO, "OSI" }, { ETHERTYPE_GRE_ISO, "GRE-OSI" }, { ETHERTYPE_CFM_OLD, "CFM (old)" }, { ETHERTYPE_CFM, "CFM" }, { ETHERTYPE_IEEE1905_1, "IEEE1905.1" }, { ETHERTYPE_LLDP, "LLDP" }, { ETHERTYPE_TIPC, "TIPC"}, { ETHERTYPE_GEONET_OLD, "GeoNet (old)"}, { ETHERTYPE_GEONET, "GeoNet"}, { ETHERTYPE_CALM_FAST, "CALM FAST"}, { ETHERTYPE_AOE, "AoE" }, { ETHERTYPE_MEDSA, "MEDSA" }, { 0, NULL} }; static inline void ether_hdr_print(netdissect_options *ndo, const u_char *bp, u_int length) { register const struct ether_header *ep; uint16_t length_type; ep = (const struct ether_header *)bp; ND_PRINT((ndo, "%s > %s", etheraddr_string(ndo, ESRC(ep)), etheraddr_string(ndo, EDST(ep)))); length_type = EXTRACT_16BITS(&ep->ether_length_type); if (!ndo->ndo_qflag) { if (length_type <= ETHERMTU) { ND_PRINT((ndo, ", 802.3")); length = length_type; } else ND_PRINT((ndo, ", ethertype %s (0x%04x)", tok2str(ethertype_values,"Unknown", length_type), length_type)); } else { if (length_type <= ETHERMTU) { ND_PRINT((ndo, ", 802.3")); length = length_type; } else ND_PRINT((ndo, ", %s", tok2str(ethertype_values,"Unknown Ethertype (0x%04x)", length_type))); } ND_PRINT((ndo, ", length %u: ", length)); } /* * Print an Ethernet frame. * This might be encapsulated within another frame; we might be passed * a pointer to a function that can print header information for that * frame's protocol, and an argument to pass to that function. * * FIXME: caplen can and should be derived from ndo->ndo_snapend and p. */ u_int ether_print(netdissect_options *ndo, const u_char *p, u_int length, u_int caplen, void (*print_encap_header)(netdissect_options *ndo, const u_char *), const u_char *encap_header_arg) { const struct ether_header *ep; u_int orig_length; u_short length_type; u_int hdrlen; int llc_hdrlen; struct lladdr_info src, dst; if (caplen < ETHER_HDRLEN) { ND_PRINT((ndo, "[|ether]")); return (caplen); } if (length < ETHER_HDRLEN) { ND_PRINT((ndo, "[|ether]")); return (length); } if (ndo->ndo_eflag) { if (print_encap_header != NULL) (*print_encap_header)(ndo, encap_header_arg); ether_hdr_print(ndo, p, length); } orig_length = length; length -= ETHER_HDRLEN; caplen -= ETHER_HDRLEN; ep = (const struct ether_header *)p; p += ETHER_HDRLEN; hdrlen = ETHER_HDRLEN; src.addr = ESRC(ep); src.addr_string = etheraddr_string; dst.addr = EDST(ep); dst.addr_string = etheraddr_string; length_type = EXTRACT_16BITS(&ep->ether_length_type); recurse: /* * Is it (gag) an 802.3 encapsulation? */ if (length_type <= ETHERMTU) { /* Try to print the LLC-layer header & higher layers */ llc_hdrlen = llc_print(ndo, p, length, caplen, &src, &dst); if (llc_hdrlen < 0) { /* packet type not known, print raw packet */ if (!ndo->ndo_suppress_default_print) ND_DEFAULTPRINT(p, caplen); llc_hdrlen = -llc_hdrlen; } hdrlen += llc_hdrlen; } else if (length_type == ETHERTYPE_8021Q || length_type == ETHERTYPE_8021Q9100 || length_type == ETHERTYPE_8021Q9200 || length_type == ETHERTYPE_8021QinQ) { /* * Print VLAN information, and then go back and process * the enclosed type field. */ if (caplen < 4) { ND_PRINT((ndo, "[|vlan]")); return (hdrlen + caplen); } if (length < 4) { ND_PRINT((ndo, "[|vlan]")); return (hdrlen + length); } if (ndo->ndo_eflag) { uint16_t tag = EXTRACT_16BITS(p); ND_PRINT((ndo, "%s, ", ieee8021q_tci_string(tag))); } length_type = EXTRACT_16BITS(p + 2); if (ndo->ndo_eflag && length_type > ETHERMTU) ND_PRINT((ndo, "ethertype %s, ", tok2str(ethertype_values,"0x%04x", length_type))); p += 4; length -= 4; caplen -= 4; hdrlen += 4; goto recurse; } else if (length_type == ETHERTYPE_JUMBO) { /* * Alteon jumbo frames. * See * * http://tools.ietf.org/html/draft-ietf-isis-ext-eth-01 * * which indicates that, following the type field, * there's an LLC header and payload. */ /* Try to print the LLC-layer header & higher layers */ llc_hdrlen = llc_print(ndo, p, length, caplen, &src, &dst); if (llc_hdrlen < 0) { /* packet type not known, print raw packet */ if (!ndo->ndo_suppress_default_print) ND_DEFAULTPRINT(p, caplen); llc_hdrlen = -llc_hdrlen; } hdrlen += llc_hdrlen; } else { if (ethertype_print(ndo, length_type, p, length, caplen, &src, &dst) == 0) { /* type not known, print raw packet */ if (!ndo->ndo_eflag) { if (print_encap_header != NULL) (*print_encap_header)(ndo, encap_header_arg); ether_hdr_print(ndo, (const u_char *)ep, orig_length); } if (!ndo->ndo_suppress_default_print) ND_DEFAULTPRINT(p, caplen); } } return (hdrlen); } /* * This is the top level routine of the printer. 'p' points * to the ether header of the packet, 'h->len' is the length * of the packet off the wire, and 'h->caplen' is the number * of bytes actually captured. */ u_int ether_if_print(netdissect_options *ndo, const struct pcap_pkthdr *h, const u_char *p) { return (ether_print(ndo, p, h->len, h->caplen, NULL, NULL)); } /* * This is the top level routine of the printer. 'p' points * to the ether header of the packet, 'h->len' is the length * of the packet off the wire, and 'h->caplen' is the number * of bytes actually captured. * * This is for DLT_NETANALYZER, which has a 4-byte pseudo-header * before the Ethernet header. */ u_int netanalyzer_if_print(netdissect_options *ndo, const struct pcap_pkthdr *h, const u_char *p) { /* * Fail if we don't have enough data for the Hilscher pseudo-header. */ if (h->len < 4 || h->caplen < 4) { ND_PRINT((ndo, "[|netanalyzer]")); return (h->caplen); } /* Skip the pseudo-header. */ return (4 + ether_print(ndo, p + 4, h->len - 4, h->caplen - 4, NULL, NULL)); } /* * This is the top level routine of the printer. 'p' points * to the ether header of the packet, 'h->len' is the length * of the packet off the wire, and 'h->caplen' is the number * of bytes actually captured. * * This is for DLT_NETANALYZER_TRANSPARENT, which has a 4-byte * pseudo-header, a 7-byte Ethernet preamble, and a 1-byte Ethernet SOF * before the Ethernet header. */ u_int netanalyzer_transparent_if_print(netdissect_options *ndo, const struct pcap_pkthdr *h, const u_char *p) { /* * Fail if we don't have enough data for the Hilscher pseudo-header, * preamble, and SOF. */ if (h->len < 12 || h->caplen < 12) { ND_PRINT((ndo, "[|netanalyzer-transparent]")); return (h->caplen); } /* Skip the pseudo-header, preamble, and SOF. */ return (12 + ether_print(ndo, p + 12, h->len - 12, h->caplen - 12, NULL, NULL)); } /* * Prints the packet payload, given an Ethernet type code for the payload's * protocol. * * Returns non-zero if it can do so, zero if the ethertype is unknown. */ int ethertype_print(netdissect_options *ndo, u_short ether_type, const u_char *p, u_int length, u_int caplen, const struct lladdr_info *src, const struct lladdr_info *dst) { switch (ether_type) { case ETHERTYPE_IP: ip_print(ndo, p, length); return (1); case ETHERTYPE_IPV6: ip6_print(ndo, p, length); return (1); case ETHERTYPE_ARP: case ETHERTYPE_REVARP: arp_print(ndo, p, length, caplen); return (1); #ifndef TCPDUMP_MINI case ETHERTYPE_DN: decnet_print(ndo, p, length, caplen); return (1); case ETHERTYPE_ATALK: if (ndo->ndo_vflag) ND_PRINT((ndo, "et1 ")); atalk_print(ndo, p, length); return (1); case ETHERTYPE_AARP: aarp_print(ndo, p, length); return (1); case ETHERTYPE_IPX: ND_PRINT((ndo, "(NOV-ETHII) ")); ipx_print(ndo, p, length); return (1); case ETHERTYPE_ISO: if (length == 0 || caplen == 0) { ND_PRINT((ndo, " [|osi]")); return (1); } isoclns_print(ndo, p + 1, length - 1); return(1); #endif case ETHERTYPE_PPPOED: case ETHERTYPE_PPPOES: case ETHERTYPE_PPPOED2: case ETHERTYPE_PPPOES2: pppoe_print(ndo, p, length); return (1); case ETHERTYPE_EAPOL: eap_print(ndo, p, length); return (1); #ifndef TCPDUMP_MINI case ETHERTYPE_RRCP: rrcp_print(ndo, p, length, src, dst); return (1); #endif case ETHERTYPE_PPP: if (length) { ND_PRINT((ndo, ": ")); ppp_print(ndo, p, length); } return (1); #ifndef TCPDUMP_MINI case ETHERTYPE_MPCP: mpcp_print(ndo, p, length); return (1); case ETHERTYPE_SLOW: slow_print(ndo, p, length); return (1); case ETHERTYPE_CFM: case ETHERTYPE_CFM_OLD: cfm_print(ndo, p, length); return (1); #endif case ETHERTYPE_LLDP: lldp_print(ndo, p, length); return (1); case ETHERTYPE_LOOPBACK: loopback_print(ndo, p, length); return (1); #ifndef TCPDUMP_MINI case ETHERTYPE_MPLS: case ETHERTYPE_MPLS_MULTI: mpls_print(ndo, p, length); return (1); case ETHERTYPE_TIPC: tipc_print(ndo, p, length, caplen); return (1); case ETHERTYPE_MS_NLB_HB: msnlb_print(ndo, p); return (1); case ETHERTYPE_GEONET_OLD: case ETHERTYPE_GEONET: geonet_print(ndo, p, length, src); return (1); case ETHERTYPE_CALM_FAST: calm_fast_print(ndo, p, length, src); return (1); case ETHERTYPE_AOE: aoe_print(ndo, p, length); return (1); case ETHERTYPE_MEDSA: medsa_print(ndo, p, length, caplen, src, dst); return (1); #endif case ETHERTYPE_LAT: case ETHERTYPE_SCA: case ETHERTYPE_MOPRC: case ETHERTYPE_MOPDL: case ETHERTYPE_IEEE1905_1: /* default_print for now */ default: return (0); } } /* * Local Variables: * c-style: whitesmith * c-basic-offset: 8 * End: */