wolfSSL STM32 Example for STM32 Cube IDE

This example includes:

  • wolfCrypt test
  • wolfCrypt benchmark
  • wolfSSL TLS client/server test using in-memory transfers

These examples use the Cube HAL for STM32.

Requirements

Configuration

The settings for the wolfSSL CubeMX pack are in the generated wolfSSL.I-CUBE-wolfSSL_conf.h file. An example of this is located in IDE/STM32Cube/wolfSSL_conf.h (renamed to avoid possible conflicts with generated file).

The template used for generation is IDE/STM32Cube/default_conf.ftl which can be updated at STM32Cube/Repository/Packs/wolfSSL/wolfSSL/[Version]/CubeMX/templates/default_conf.ftl.

The section for "Hardware platform" may need to be adjusted depending on your processor and board:

  • To enable STM32F1 support define WOLFSSL_STM32F1.
  • To enable STM32F2 support define WOLFSSL_STM32F2.
  • To enable STM32F4 support define WOLFSSL_STM32F4.
  • To enable STM32F7 support define WOLFSSL_STM32F7.
  • To enable STM32L4 support define WOLFSSL_STM32L4.
  • To enable STM32L5 support define WOLFSSL_STM32L5.
  • To enable STM32H7 support define WOLFSSL_STM32H7.
  • To enable STM32WB support define WOLFSSL_STM32WB.

To use the STM32 Cube HAL support make sure WOLFSSL_STM32_CUBEMX is defined.

The L5 and WB55 support ECC PKA acceleration, which is enabled with WOLFSSL_STM32_PKA.

To disable hardware crypto acceleration you can define:

  • NO_STM32_HASH
  • NO_STM32_CRYPTO

To enable the latest Cube HAL support please define STM32_HAL_V2.

If you'd like to use the older Standard Peripheral library undefine WOLFSSL_STM32_CUBEMX.

With STM32 Cube HAL v2 some AES GCM hardware has a limitation for the AAD header, which must be a multiple of 4 bytes.

If using STM32_AESGCM_PARTIAL with the following patch it will enable use for all AAD header sizes. The STM32Cube_FW_F7_V1.16.0 patch is:

diff --git a/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cryp.h b/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cryp.h
--- a/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cryp.h
+++ b/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cryp.h
@@ -63,6 +63,7 @@ typedef struct
                                         GCM : also known as Additional Authentication Data
                                         CCM : named B1 composed of the associated data length and Associated Data. */
   uint32_t HeaderSize;                /*!< The size of header buffer in word  */
+  uint32_t HeaderPadSize;             /*!< <PATCH> The size of padding in bytes added to actual header data to pad it to a multiple of 32 bits </PATCH>  */
   uint32_t *B0;                       /*!< B0 is first authentication block used only  in AES CCM mode */
   uint32_t DataWidthUnit;              /*!< Data With Unit, this parameter can be value of @ref CRYP_Data_Width_Unit*/
   uint32_t KeyIVConfigSkip;            /*!< CRYP peripheral Key and IV configuration skip, to config Key and Initialization

diff --git a/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cryp_ex.c b/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cryp_ex.c
--- a/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cryp_ex.c
+++ b/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cryp_ex.c
@@ -132,6 +132,8 @@ HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, u
   uint64_t inputlength = (uint64_t)hcryp->SizesSum * 8U; /* input length in bits */
   uint32_t tagaddr = (uint32_t)AuthTag;
 
+  headerlength -= ((uint64_t)(hcryp->Init.HeaderPadSize) * 8U); /* <PATCH> Decrement the header size removing the pad size </PATCH> */  
+
   if (hcryp->State == HAL_CRYP_STATE_READY)
   {
     /* Process locked */

If you are using FreeRTOS make sure your FreeRTOSConfig.h has its configTOTAL_HEAP_SIZE increased.

The TLS client/server benchmark example requires about 76 KB for allocated tasks (with stack) and peak heap. This uses both a TLS client and server to test a TLS connection locally for each enabled TLS cipher suite.

STM32 Cube Pack

STM32 Cube Pack Installation

  1. Download wolfSSL Cube Pack
  2. Run the “STM32CubeMX” tool.
  3. Under “Manage software installations” click “INSTALL/REMOVE” button.
  4. From Local and choose “I-CUBE-wolfSSL.pack”.
  5. Accept the GPLv2 license. Contact wolfSSL at sales@wolfssl.com for a commercial license and support/maintenance.

STM32 Cube Pack Usage

  1. Create or open a Cube Project based on your hardware.
  2. Under “Software Packs” choose “Select Components”.
  3. Find and check all components for the wolfSSL.wolfSSL packs (wolfSSL / Core, wolfCrypt / Core and wolfCrypt / Test). Close
  4. Under the “Software Packs” section click on “wolfSSL.wolfSSL” and configure the parameters.
  5. For Cortex-M recommend “Math Configuration” -> “Single Precision Cortex-M Math” for the fastest option.
  6. Generate Code
  7. The Benchmark example uses float. To enable go to "Project Properties" -> "C/C++ Build" -> "Settings" -> "Tool Settings" -> "MCU Settings" -> Check "Use float with printf".
  8. To enable printf make the main.c changes below in the STM32 Printf section.

STM32 Cube Pack Examples

In the I-CUBE-wolfSSL.pack pack there are pre-assembled example projects available. After installing the pack you can find these example projects in STM32Cube/Repository/Packs/wolfSSL/wolfSSL/[Version]/Projects. To use an example:

  1. Open STM32CubeIDE
  2. Choose "Import" -> "Import an Existing STM32CubeMX Configuration File (.ioc)".
  3. Browse to find the .ioc in STM32Cube/Repository/Packs/wolfSSL/wolfSSL/[Version]/Projects and click finish.

Example IDE/STM32Cube/wolfssl_example.c Output

....MENU

.t. WolfCrypt Test
.b. WolfCrypt Benchmark
.l. WolfSSL TLS Bench
.e. Show Cipher List

Please select one of the above options:

Benchmarks

See STM32_Benchmarks.md.

Note: The Benchmark example uses float. To enable go to "Project Properties" -> "C/C++ Build" -> "Settings" -> "Tool Settings" -> "MCU Settings" -> Check "Use float with printf".

STM32 Printf

In main.c make the following changes:

/* Retargets the C library printf function to the USART. */
#include <stdio.h>
#include <wolfssl/wolfcrypt/settings.h>
#ifdef __GNUC__
int __io_putchar(int ch)
#else
int fputc(int ch, FILE *f)
#endif
{
    HAL_UART_Transmit(&HAL_CONSOLE_UART, (uint8_t *)&ch, 1, 0xFFFF);

    return ch;
}
#ifdef __GNUC__
int _write(int file,char *ptr, int len)
{
    int DataIdx;
    for (DataIdx= 0; DataIdx< len; DataIdx++) {
        __io_putchar(*ptr++);
    }
    return len;
}
#endif

int main(void)
{
    /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
    HAL_Init();

    /* Turn off buffers, so I/O occurs immediately */
    setvbuf(stdin, NULL, _IONBF, 0);
    setvbuf(stdout, NULL, _IONBF, 0);
    setvbuf(stderr, NULL, _IONBF, 0);

Support

For questions please email support@wolfssl.com