From c24cbb648c5bde8312dbd5498a4b8c12b2692205 Mon Sep 17 00:00:00 2001 From: Biwen Li Date: Wed, 17 Apr 2019 18:58:45 +0800 Subject: [PATCH] mdio-phy: support layerscape This is an integrated patch of mdio-phy for layerscape Signed-off-by: Bhaskar Upadhaya Signed-off-by: Biwen Li Signed-off-by: Camelia Groza Signed-off-by: Constantin Tudor Signed-off-by: costi Signed-off-by: Florin Chiculita Signed-off-by: Florinel Iordache Signed-off-by: Ioana Ciornei Signed-off-by: Ioana Radulescu Signed-off-by: Madalin Bucur Signed-off-by: Pankaj Bansal Signed-off-by: Shaohui Xie Signed-off-by: Valentin Catalin Neacsu Signed-off-by: Vladimir Oltean --- drivers/net/phy/Kconfig | 33 + drivers/net/phy/Makefile | 5 + drivers/net/phy/aquantia.c | 286 ++++- drivers/net/phy/at803x.c | 21 + drivers/net/phy/fsl_backplane.c | 1780 ++++++++++++++++++++++++++++ drivers/net/phy/fsl_backplane.h | 41 + drivers/net/phy/fsl_backplane_serdes_10g.c | 281 +++++ drivers/net/phy/fsl_backplane_serdes_28g.c | 336 ++++++ drivers/net/phy/inphi.c | 594 ++++++++++ drivers/net/phy/mdio-mux-multiplexer.c | 122 ++ drivers/net/phy/swphy.c | 1 + include/linux/phy.h | 3 + 12 files changed, 3484 insertions(+), 19 deletions(-) create mode 100644 drivers/net/phy/fsl_backplane.c create mode 100644 drivers/net/phy/fsl_backplane.h create mode 100644 drivers/net/phy/fsl_backplane_serdes_10g.c create mode 100644 drivers/net/phy/fsl_backplane_serdes_28g.c create mode 100644 drivers/net/phy/inphi.c create mode 100644 drivers/net/phy/mdio-mux-multiplexer.c --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -87,9 +87,27 @@ config MDIO_BUS_MUX_MMIOREG Currently, only 8/16/32 bits registers are supported. +config MDIO_BUS_MUX_MULTIPLEXER + tristate "MDIO bus multiplexer using kernel multiplexer subsystem" + depends on OF + select MULTIPLEXER + select MDIO_BUS_MUX + help + This module provides a driver for MDIO bus multiplexer + that is controlled via the kernel multiplexer subsystem. The + bus multiplexer connects one of several child MDIO busses to + a parent bus. Child bus selection is under the control of + the kernel multiplexer subsystem. + config MDIO_CAVIUM tristate +config MDIO_FSL_BACKPLANE + tristate "Support for backplane on Freescale XFI interface" + depends on OF_MDIO + help + This module provides a driver for Freescale XFI's backplane. + config MDIO_GPIO tristate "GPIO lib-based bitbanged MDIO buses" depends on MDIO_BITBANG && GPIOLIB @@ -304,6 +322,16 @@ config AT803X_PHY ---help--- Currently supports the AT8030 and AT8035 model +config AT803X_PHY_SMART_EEE + depends on AT803X_PHY + default n + tristate "SmartEEE feature for AT803X PHYs" + ---help--- + Enables the Atheros SmartEEE feature (not IEEE 802.3az). When 2 PHYs + which support this feature are connected back-to-back, they may + negotiate a low-power sleep mode autonomously, without the Ethernet + controller's knowledge. May cause packet loss. + config BCM63XX_PHY tristate "Broadcom 63xx SOCs internal PHY" depends on BCM63XX @@ -386,6 +414,11 @@ config ICPLUS_PHY ---help--- Currently supports the IP175C and IP1001 PHYs. +config INPHI_PHY + tristate "Inphi CDR 10G/25G Ethernet PHY" + ---help--- + Currently supports the IN112525_S03 part @ 25G + config INTEL_XWAY_PHY tristate "Intel XWAY PHYs" ---help--- --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -44,7 +44,11 @@ obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o +obj-$(CONFIG_MDIO_BUS_MUX_MULTIPLEXER) += mdio-mux-multiplexer.o obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o +obj-$(CONFIG_MDIO_FSL_BACKPLANE) += fsl_backplane.o +obj-$(CONFIG_MDIO_FSL_BACKPLANE) += fsl_backplane_serdes_10g.o +obj-$(CONFIG_MDIO_FSL_BACKPLANE) += fsl_backplane_serdes_28g.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o @@ -75,6 +79,7 @@ obj-$(CONFIG_DP83848_PHY) += dp83848.o obj-$(CONFIG_DP83867_PHY) += dp83867.o obj-$(CONFIG_FIXED_PHY) += fixed_phy.o obj-$(CONFIG_ICPLUS_PHY) += icplus.o +obj-$(CONFIG_INPHI_PHY) += inphi.o obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o obj-$(CONFIG_LXT_PHY) += lxt.o --- a/drivers/net/phy/aquantia.c +++ b/drivers/net/phy/aquantia.c @@ -4,6 +4,7 @@ * Author: Shaohui Xie * * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -27,15 +28,174 @@ #define PHY_AQUANTIA_FEATURES (SUPPORTED_10000baseT_Full | \ SUPPORTED_1000baseT_Full | \ + SUPPORTED_2500baseX_Full | \ SUPPORTED_100baseT_Full | \ PHY_DEFAULT_FEATURES) +#define MDIO_PMA_CTRL1_AQ_SPEED10 0 +#define MDIO_PMA_CTRL1_AQ_SPEED2500 0x2058 +#define MDIO_PMA_CTRL1_AQ_SPEED5000 0x205c +#define MDIO_PMA_CTRL2_AQ_2500BT 0x30 +#define MDIO_PMA_CTRL2_AQ_5000BT 0x31 +#define MDIO_PMA_CTRL2_AQ_TYPE_MASK 0x3F + +#define MDIO_AN_VENDOR_PROV_CTRL 0xc400 +#define MDIO_AN_RECV_LP_STATUS 0xe820 + +static int aquantia_write_reg(struct phy_device *phydev, int devad, + u32 regnum, u16 val) +{ + u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff); + + return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, addr, val); +} + +static int aquantia_read_reg(struct phy_device *phydev, int devad, u32 regnum) +{ + u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff); + + return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr); +} + +static int aquantia_pma_setup_forced(struct phy_device *phydev) +{ + int ctrl1, ctrl2, ret; + + /* Half duplex is not supported */ + if (phydev->duplex != DUPLEX_FULL) + return -EINVAL; + + ctrl1 = aquantia_read_reg(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); + if (ctrl1 < 0) + return ctrl1; + + ctrl2 = aquantia_read_reg(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2); + if (ctrl2 < 0) + return ctrl2; + + ctrl1 &= ~MDIO_CTRL1_SPEEDSEL; + ctrl2 &= ~(MDIO_PMA_CTRL2_AQ_TYPE_MASK); + + switch (phydev->speed) { + case SPEED_10: + ctrl2 |= MDIO_PMA_CTRL2_10BT; + break; + case SPEED_100: + ctrl1 |= MDIO_PMA_CTRL1_SPEED100; + ctrl2 |= MDIO_PMA_CTRL2_100BTX; + break; + case SPEED_1000: + ctrl1 |= MDIO_PMA_CTRL1_SPEED1000; + /* Assume 1000base-T */ + ctrl2 |= MDIO_PMA_CTRL2_1000BT; + break; + case SPEED_10000: + ctrl1 |= MDIO_CTRL1_SPEED10G; + /* Assume 10Gbase-T */ + ctrl2 |= MDIO_PMA_CTRL2_10GBT; + break; + case SPEED_2500: + ctrl1 |= MDIO_PMA_CTRL1_AQ_SPEED2500; + ctrl2 |= MDIO_PMA_CTRL2_AQ_2500BT; + break; + case SPEED_5000: + ctrl1 |= MDIO_PMA_CTRL1_AQ_SPEED5000; + ctrl2 |= MDIO_PMA_CTRL2_AQ_5000BT; + break; + default: + return -EINVAL; + } + + ret = aquantia_write_reg(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, ctrl1); + if (ret < 0) + return ret; + + return aquantia_write_reg(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2); +} + +static int aquantia_aneg(struct phy_device *phydev, bool control) +{ + int reg = aquantia_read_reg(phydev, MDIO_MMD_AN, MDIO_CTRL1); + + if (reg < 0) + return reg; + + if (control) + reg |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART; + else + reg &= ~(MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART); + + return aquantia_write_reg(phydev, MDIO_MMD_AN, MDIO_CTRL1, reg); +} + +static int aquantia_config_advert(struct phy_device *phydev) +{ + u32 advertise; + int oldadv, adv, oldadv1, adv1; + int err, changed = 0; + + /* Only allow advertising what this PHY supports */ + phydev->advertising &= phydev->supported; + advertise = phydev->advertising; + + /* Setup standard advertisement */ + oldadv = aquantia_read_reg(phydev, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL); + if (oldadv < 0) + return oldadv; + + /* Aquantia vendor specific advertisments */ + oldadv1 = aquantia_read_reg(phydev, MDIO_MMD_AN, + MDIO_AN_VENDOR_PROV_CTRL); + if (oldadv1 < 0) + return oldadv1; + + adv = 0; + adv1 = 0; + + /*100BaseT_full is supported by default*/ + + if (advertise & ADVERTISED_1000baseT_Full) + adv1 |= 0x8000; + if (advertise & ADVERTISED_10000baseT_Full) + adv |= 0x1000; + if (advertise & ADVERTISED_2500baseX_Full) + adv1 |= 0x400; + + if (adv != oldadv) { + err = aquantia_write_reg(phydev, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL, adv); + if (err < 0) + return err; + changed = 1; + } + if (adv1 != oldadv1) { + err = aquantia_write_reg(phydev, MDIO_MMD_AN, + MDIO_AN_VENDOR_PROV_CTRL, adv1); + if (err < 0) + return err; + changed = 1; + } + + return changed; +} + static int aquantia_config_aneg(struct phy_device *phydev) { + int ret = 0; + phydev->supported = PHY_AQUANTIA_FEATURES; - phydev->advertising = phydev->supported; + if (phydev->autoneg == AUTONEG_DISABLE) { + aquantia_pma_setup_forced(phydev); + return aquantia_aneg(phydev, false); + } - return 0; + ret = aquantia_config_advert(phydev); + if (ret > 0) + /* restart autoneg */ + return aquantia_aneg(phydev, true); + + return ret; } static int aquantia_aneg_done(struct phy_device *phydev) @@ -51,25 +211,26 @@ static int aquantia_config_intr(struct p int err; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { - err = phy_write_mmd(phydev, MDIO_MMD_AN, 0xd401, 1); + err = aquantia_write_reg(phydev, MDIO_MMD_AN, 0xd401, 1); if (err < 0) return err; - err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff00, 1); + err = aquantia_write_reg(phydev, MDIO_MMD_VEND1, 0xff00, 1); if (err < 0) return err; - err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff01, 0x1001); + err = aquantia_write_reg(phydev, MDIO_MMD_VEND1, + 0xff01, 0x1001); } else { - err = phy_write_mmd(phydev, MDIO_MMD_AN, 0xd401, 0); + err = aquantia_write_reg(phydev, MDIO_MMD_AN, 0xd401, 0); if (err < 0) return err; - err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff00, 0); + err = aquantia_write_reg(phydev, MDIO_MMD_VEND1, 0xff00, 0); if (err < 0) return err; - err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff01, 0); + err = aquantia_write_reg(phydev, MDIO_MMD_VEND1, 0xff01, 0); } return err; @@ -79,42 +240,129 @@ static int aquantia_ack_interrupt(struct { int reg; - reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xcc01); + reg = aquantia_read_reg(phydev, MDIO_MMD_AN, 0xcc01); return (reg < 0) ? reg : 0; } +static int aquantia_read_advert(struct phy_device *phydev) +{ + int adv, adv1; + + /* Setup standard advertisement */ + adv = aquantia_read_reg(phydev, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL); + + /* Aquantia vendor specific advertisments */ + adv1 = aquantia_read_reg(phydev, MDIO_MMD_AN, + MDIO_AN_VENDOR_PROV_CTRL); + + /*100BaseT_full is supported by default*/ + phydev->advertising |= ADVERTISED_100baseT_Full; + + if (adv & 0x1000) + phydev->advertising |= ADVERTISED_10000baseT_Full; + else + phydev->advertising &= ~ADVERTISED_10000baseT_Full; + if (adv1 & 0x8000) + phydev->advertising |= ADVERTISED_1000baseT_Full; + else + phydev->advertising &= ~ADVERTISED_1000baseT_Full; + if (adv1 & 0x400) + phydev->advertising |= ADVERTISED_2500baseX_Full; + else + phydev->advertising &= ~ADVERTISED_2500baseX_Full; + return 0; +} + +static int aquantia_read_lp_advert(struct phy_device *phydev) +{ + int adv, adv1; + + /* Read standard link partner advertisement */ + adv = aquantia_read_reg(phydev, MDIO_MMD_AN, + MDIO_STAT1); + + if (adv & 0x1) + phydev->lp_advertising |= ADVERTISED_Autoneg | + ADVERTISED_100baseT_Full; + else + phydev->lp_advertising &= ~(ADVERTISED_Autoneg | + ADVERTISED_100baseT_Full); + + /* Read standard link partner advertisement */ + adv = aquantia_read_reg(phydev, MDIO_MMD_AN, + MDIO_AN_10GBT_STAT); + + /* Aquantia link partner advertisments */ + adv1 = aquantia_read_reg(phydev, MDIO_MMD_AN, + MDIO_AN_RECV_LP_STATUS); + + if (adv & 0x800) + phydev->lp_advertising |= ADVERTISED_10000baseT_Full; + else + phydev->lp_advertising &= ~ADVERTISED_10000baseT_Full; + if (adv1 & 0x8000) + phydev->lp_advertising |= ADVERTISED_1000baseT_Full; + else + phydev->lp_advertising &= ~ADVERTISED_1000baseT_Full; + if (adv1 & 0x400) + phydev->lp_advertising |= ADVERTISED_2500baseX_Full; + else + phydev->lp_advertising &= ~ADVERTISED_2500baseX_Full; + + return 0; +} + static int aquantia_read_status(struct phy_device *phydev) { int reg; - reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); - reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + /* Read the link status twice; the bit is latching low */ + reg = aquantia_read_reg(phydev, MDIO_MMD_AN, MDIO_STAT1); + reg = aquantia_read_reg(phydev, MDIO_MMD_AN, MDIO_STAT1); + if (reg & MDIO_STAT1_LSTATUS) phydev->link = 1; else phydev->link = 0; - reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xc800); mdelay(10); - reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xc800); + reg = aquantia_read_reg(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); + + if ((reg & MDIO_CTRL1_SPEEDSELEXT) == MDIO_CTRL1_SPEEDSELEXT) + reg &= MDIO_CTRL1_SPEEDSEL; + else + reg &= MDIO_CTRL1_SPEEDSELEXT; switch (reg) { - case 0x9: + case MDIO_PMA_CTRL1_AQ_SPEED5000: + phydev->speed = SPEED_5000; + break; + case MDIO_PMA_CTRL1_AQ_SPEED2500: phydev->speed = SPEED_2500; break; - case 0x5: - phydev->speed = SPEED_1000; + case MDIO_PMA_CTRL1_AQ_SPEED10: + phydev->speed = SPEED_10; break; - case 0x3: + case MDIO_PMA_CTRL1_SPEED100: phydev->speed = SPEED_100; break; - case 0x7: - default: + case MDIO_PMA_CTRL1_SPEED1000: + phydev->speed = SPEED_1000; + break; + case MDIO_CTRL1_SPEED10G: phydev->speed = SPEED_10000; break; + default: + phydev->speed = SPEED_UNKNOWN; + break; } + phydev->duplex = DUPLEX_FULL; + aquantia_read_advert(phydev); + aquantia_read_lp_advert(phydev); + return 0; } --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -68,6 +68,8 @@ #define AT803X_DEBUG_REG_5 0x05 #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) +#define AT803X_LPI_EN BIT(8) + #define ATH8030_PHY_ID 0x004dd076 #define ATH8031_PHY_ID 0x004dd074 #define ATH8032_PHY_ID 0x004dd023 @@ -290,6 +292,19 @@ static void at803x_disable_smarteee(stru phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0); } +static void at803x_enable_smart_eee(struct phy_device *phydev, int on) +{ + int value; + + /* 5.1.11 Smart_eee control3 */ + value = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x805D); + if (on) + value |= AT803X_LPI_EN; + else + value &= ~AT803X_LPI_EN; + phy_write_mmd(phydev, MDIO_MMD_PCS, 0x805D, value); +} + static int at803x_config_init(struct phy_device *phydev) { struct at803x_platform_data *pdata; @@ -320,6 +335,12 @@ static int at803x_config_init(struct phy if (ret < 0) return ret; +#ifdef CONFIG_AT803X_PHY_SMART_EEE + at803x_enable_smart_eee(phydev, 1); +#else + at803x_enable_smart_eee(phydev, 0); +#endif + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID || phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) { ret = at803x_enable_rx_delay(phydev); --- /dev/null +++ b/drivers/net/phy/fsl_backplane.c @@ -0,0 +1,1780 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * DPAA backplane driver. + * Author: Shaohui Xie + * Florinel Iordache + * + * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "fsl_backplane.h" + + +/* PCS Device Identifier */ +#define PCS_PHY_DEVICE_ID 0x0083e400 +#define PCS_PHY_DEVICE_ID_MASK 0xffffffff + +/* 10G Long cables setup: 1 m to 2 m cables */ +#define RATIO_PREQ_10G 0x3 +#define RATIO_PST1Q_10G 0xd +#define RATIO_EQ_10G 0x20 + +/* 10G Short cables setup: up to 30 cm cable */ +//#define RATIO_PREQ_10G 0x3 +//#define RATIO_PST1Q_10G 0xa +//#define RATIO_EQ_10G 0x29 + +/* 40G Long cables setup: 1 m to 2 m cables */ +#define RATIO_PREQ_40G 0x2 +#define RATIO_PST1Q_40G 0xd +#define RATIO_EQ_40G 0x20 + +/* 40G Short cables setup: up to 30 cm cable */ +//#define RATIO_PREQ_40G 0x1 +//#define RATIO_PST1Q_40G 0x3 +//#define RATIO_EQ_40G 0x29 + +/* LX2 2x40G default RCW setup */ +//#define RATIO_PREQ_40G 0x0 +//#define RATIO_PST1Q_40G 0x3 +//#define RATIO_EQ_40G 0x30 + +/* Max/Min coefficient values */ +#define PRE_COE_MAX 0x0 +#define PRE_COE_MIN 0x8 +#define POST_COE_MAX 0x0 +#define POST_COE_MIN 0x10 +#define ZERO_COE_MAX 0x30 +#define ZERO_COE_MIN 0x0 + +/* KR PMD defines */ +#define PMD_RESET 0x1 +#define PMD_STATUS_SUP_STAT 0x4 +#define PMD_STATUS_FRAME_LOCK 0x2 +#define TRAIN_EN 0x3 +#define TRAIN_DISABLE 0x1 +#define RX_STAT 0x1 + +/* PCS Link up */ +#define XFI_PCS_SR1 0x20 +#define KR_RX_LINK_STAT_MASK 0x1000 + +/* KX PCS mode register */ +#define KX_PCS_IF_MODE 0x8014 + +/* KX PCS mode register init value */ +#define KX_IF_MODE_INIT 0x8 + +/* KX/KR AN registers */ +#define AN_CTRL_INIT 0x1200 +#define KX_AN_AD1_INIT 0x25 +#define KR_AN_AD1_INIT_10G 0x85 +#define KR_AN_AD1_INIT_40G 0x105 +#define AN_LNK_UP_MASK 0x4 +#define KR_AN_MASK_10G 0x8 +#define KR_AN_MASK_40G 0x20 +#define TRAIN_FAIL 0x8 +#define KR_AN_40G_MDIO_OFFSET 4 + +/* XGKR Timeouts */ +#define XGKR_TIMEOUT 1050 +#define XGKR_DENY_RT_INTERVAL 3000 +#define XGKR_AN_WAIT_ITERATIONS 5 + +/* XGKR Increment/Decrement Requests */ +#define INCREMENT 1 +#define DECREMENT 2 +#define TIMEOUT_LONG 3 +#define TIMEOUT_M1 3 + +/* XGKR Masks */ +#define RX_READY_MASK 0x8000 +#define PRESET_MASK 0x2000 +#define INIT_MASK 0x1000 +#define COP1_MASK 0x30 +#define COP1_SHIFT 4 +#define COZ_MASK 0xc +#define COZ_SHIFT 2 +#define COM1_MASK 0x3 +#define COM1_SHIFT 0 +#define REQUEST_MASK 0x3f +#define LD_ALL_MASK (PRESET_MASK | INIT_MASK | \ + COP1_MASK | COZ_MASK | COM1_MASK) + +/* Lanes definitions */ +#define MASTER_LANE 0 +#define SINGLE_LANE 0 +#define MAX_PHY_LANES_NO 4 + +/* Invalid value */ +#define VAL_INVALID 0xff + +/* New XGKR Training Algorithm */ +#define NEW_ALGORITHM_TRAIN_TX + +#ifdef NEW_ALGORITHM_TRAIN_TX +#define FORCE_INC_COP1_NUMBER 0 +#define FORCE_INC_COM1_NUMBER 1 +#endif + +/* Link_Training_Registers offsets */ +static int lt_MDIO_MMD = 0; +static u32 lt_KR_PMD_CTRL = 0; +static u32 lt_KR_PMD_STATUS = 0; +static u32 lt_KR_LP_CU = 0; +static u32 lt_KR_LP_STATUS = 0; +static u32 lt_KR_LD_CU = 0; +static u32 lt_KR_LD_STATUS = 0; + +/* KX/KR AN registers offsets */ +static u32 g_an_AD1 = 0; +static u32 g_an_BP_STAT = 0; + +static const u32 preq_table[] = {0x0, 0x1, 0x3, 0x5, + 0x7, 0x9, 0xb, 0xc, VAL_INVALID}; +static const u32 pst1q_table[] = {0x0, 0x1, 0x3, 0x5, 0x7, + 0x9, 0xb, 0xd, 0xf, 0x10, VAL_INVALID}; + +enum backplane_mode { + PHY_BACKPLANE_1000BASE_KX, + PHY_BACKPLANE_10GBASE_KR, + PHY_BACKPLANE_40GBASE_KR, + PHY_BACKPLANE_INVAL +}; + +enum serdes_type { + SERDES_10G, + SERDES_28G, + SERDES_INVAL +}; + +enum coe_filed { + COE_COP1, + COE_COZ, + COE_COM +}; + +enum coe_update { + COE_NOTUPDATED, + COE_UPDATED, + COE_MIN, + COE_MAX, + COE_INV +}; + +enum train_state { + DETECTING_LP, + TRAINED, +}; + +struct tx_condition { + bool bin_m1_late_early; + bool bin_long_late_early; + bool bin_m1_stop; + bool bin_long_stop; + bool tx_complete; + bool sent_init; + int m1_min_max_cnt; + int long_min_max_cnt; +#ifdef NEW_ALGORITHM_TRAIN_TX + int pre_inc; + int post_inc; +#endif +}; + +struct xgkr_params { + void *reg_base; /* lane memory map: registers base address */ + int idx; /* lane relative index inside a multi-lane PHY */ + struct phy_device *phydev; + struct serdes_access *srds; + struct tx_condition tx_c; + struct delayed_work xgkr_wk; + enum train_state state; + int an_wait_count; + unsigned long rt_time; + u32 ld_update; + u32 ld_status; + u32 ratio_preq; + u32 ratio_pst1q; + u32 adpt_eq; + u32 tuned_ratio_preq; + u32 tuned_ratio_pst1q; + u32 tuned_adpt_eq; +}; + +struct xgkr_phy_data { + int bp_mode; + u32 phy_lanes; + struct mutex phy_lock; + bool aneg_done; + struct xgkr_params xgkr[MAX_PHY_LANES_NO]; +}; + +static void setup_an_lt_ls(void) +{ + /* KR PMD registers */ + lt_MDIO_MMD = MDIO_MMD_PMAPMD; + lt_KR_PMD_CTRL = 0x96; + lt_KR_PMD_STATUS = 0x97; + lt_KR_LP_CU = 0x98; + lt_KR_LP_STATUS = 0x99; + lt_KR_LD_CU = 0x9a; + lt_KR_LD_STATUS = 0x9b; + + /* KX/KR AN registers */ + g_an_AD1 = 0x11; + g_an_BP_STAT = 0x30; +} + +static void setup_an_lt_lx(void) +{ + /* Auto-Negotiation and Link Training Core Registers page 1: 256 = 0x100 */ + lt_MDIO_MMD = MDIO_MMD_AN; + lt_KR_PMD_CTRL = 0x100; + lt_KR_PMD_STATUS = 0x101; + lt_KR_LP_CU = 0x102; + lt_KR_LP_STATUS = 0x103; + lt_KR_LD_CU = 0x104; + lt_KR_LD_STATUS = 0x105; + + /* KX/KR AN registers */ + g_an_AD1 = 0x03; + g_an_BP_STAT = 0x0F; +} + +static u32 le_ioread32(u32 *reg) +{ + return ioread32(reg); +} + +static void le_iowrite32(u32 value, u32 *reg) +{ + iowrite32(value, reg); +} + +static u32 be_ioread32(u32 *reg) +{ + return ioread32be(reg); +} + +static void be_iowrite32(u32 value, u32 *reg) +{ + iowrite32be(value, reg); +} + +/** + * xgkr_phy_write_mmd - Wrapper function for phy_write_mmd + * for writing a register on an MMD on a given PHY. + * + * Same rules as for phy_write_mmd(); + */ +static int xgkr_phy_write_mmd(struct xgkr_params *xgkr, int devad, u32 regnum, u16 val) +{ + struct phy_device *phydev = xgkr->phydev; + struct xgkr_phy_data *xgkr_inst = phydev->priv; + int mdio_addr = phydev->mdio.addr; + int err; + + mutex_lock(&xgkr_inst->phy_lock); + + if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR && devad == MDIO_MMD_AN) { + //40G AN: prepare mdio address for writing phydev AN registers for 40G on respective lane + phydev->mdio.addr = KR_AN_40G_MDIO_OFFSET + xgkr->idx; + } + + err = phy_write_mmd(phydev, devad, regnum, val); + if (err) + dev_err(&phydev->mdio.dev, "Writing PHY (%p) MMD = 0x%02x register = 0x%02x failed with error code: 0x%08x \n", phydev, devad, regnum, err); + + if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR && devad == MDIO_MMD_AN) { + //40G AN: restore mdio address + phydev->mdio.addr = mdio_addr; + } + + mutex_unlock(&xgkr_inst->phy_lock); + + return err; +} + +/** + * xgkr_phy_read_mmd - Wrapper function for phy_read_mmd + * for reading a register from an MMD on a given PHY. + * + * Same rules as for phy_read_mmd(); + */ +static int xgkr_phy_read_mmd(struct xgkr_params *xgkr, int devad, u32 regnum) +{ + struct phy_device *phydev = xgkr->phydev; + struct xgkr_phy_data *xgkr_inst = phydev->priv; + int mdio_addr = phydev->mdio.addr; + int ret; + + mutex_lock(&xgkr_inst->phy_lock); + + if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR && devad == MDIO_MMD_AN) { + //40G AN: prepare mdio address for reading phydev AN registers for 40G on respective lane + phydev->mdio.addr = KR_AN_40G_MDIO_OFFSET + xgkr->idx; + } + + ret = phy_read_mmd(phydev, devad, regnum); + + if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR && devad == MDIO_MMD_AN) { + //40G AN: restore mdio address + phydev->mdio.addr = mdio_addr; + } + + mutex_unlock(&xgkr_inst->phy_lock); + + return ret; +} + +static void tx_condition_init(struct tx_condition *tx_c) +{ + tx_c->bin_m1_late_early = true; + tx_c->bin_long_late_early = false; + tx_c->bin_m1_stop = false; + tx_c->bin_long_stop = false; + tx_c->tx_complete = false; + tx_c->sent_init = false; + tx_c->m1_min_max_cnt = 0; + tx_c->long_min_max_cnt = 0; +#ifdef NEW_ALGORITHM_TRAIN_TX + tx_c->pre_inc = FORCE_INC_COM1_NUMBER; + tx_c->post_inc = FORCE_INC_COP1_NUMBER; +#endif +} + +void tune_tecr(struct xgkr_params *xgkr) +{ + struct phy_device *phydev = xgkr->phydev; + struct xgkr_phy_data *xgkr_inst = phydev->priv; + bool reset = false; + + if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR) { + /* Reset only the Master Lane */ + reset = (xgkr->idx == MASTER_LANE); + } else { + reset = true; + } + + xgkr->srds->tune_tecr(xgkr->reg_base, xgkr->ratio_preq, xgkr->ratio_pst1q, xgkr->adpt_eq, reset); + + xgkr->tuned_ratio_preq = xgkr->ratio_preq; + xgkr->tuned_ratio_pst1q = xgkr->ratio_pst1q; + xgkr->tuned_adpt_eq = xgkr->adpt_eq; +} + +static void start_lt(struct xgkr_params *xgkr) +{ + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_PMD_CTRL, TRAIN_EN); +} + +static void stop_lt(struct xgkr_params *xgkr) +{ + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_PMD_CTRL, TRAIN_DISABLE); +} + +static void reset_lt(struct xgkr_params *xgkr) +{ + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, MDIO_CTRL1, PMD_RESET); + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_PMD_CTRL, TRAIN_DISABLE); + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_LD_CU, 0); + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_LD_STATUS, 0); + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_PMD_STATUS, 0); + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_LP_CU, 0); + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, lt_KR_LP_STATUS, 0); + +} + +static void ld_coe_status(struct xgkr_params *xgkr) +{ + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, + lt_KR_LD_STATUS, xgkr->ld_status); +} + +static void ld_coe_update(struct xgkr_params *xgkr) +{ + dev_dbg(&xgkr->phydev->mdio.dev, "sending request: %x\n", xgkr->ld_update); + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, + lt_KR_LD_CU, xgkr->ld_update); +} + +static void start_xgkr_state_machine(struct delayed_work *work) +{ + queue_delayed_work(system_power_efficient_wq, work, + msecs_to_jiffies(XGKR_TIMEOUT)); +} + +static void start_xgkr_an(struct xgkr_params *xgkr) +{ + struct phy_device *phydev = xgkr->phydev; + struct xgkr_phy_data *xgkr_inst = phydev->priv; + int i; + int err; + + switch (xgkr_inst->bp_mode) + { + case PHY_BACKPLANE_1000BASE_KX: + dev_err(&phydev->mdio.dev, "Wrong call path for 1000Base-KX \n"); + break; + + case PHY_BACKPLANE_10GBASE_KR: + err = xgkr_phy_write_mmd(xgkr, MDIO_MMD_AN, g_an_AD1, KR_AN_AD1_INIT_10G); + if (err) + dev_err(&phydev->mdio.dev, "Setting AN register 0x%02x failed with error code: 0x%08x \n", g_an_AD1, err); + udelay(1); + err = xgkr_phy_write_mmd(xgkr, MDIO_MMD_AN, MDIO_CTRL1, AN_CTRL_INIT); + if (err) + dev_err(&phydev->mdio.dev, "Setting AN register 0x%02x failed with error code: 0x%08x \n", MDIO_CTRL1, err); + break; + + case PHY_BACKPLANE_40GBASE_KR: + if (xgkr->idx == MASTER_LANE) { + for (i = 0; i < xgkr_inst->phy_lanes; i++) { + err = xgkr_phy_write_mmd(&xgkr_inst->xgkr[i], MDIO_MMD_AN, g_an_AD1, KR_AN_AD1_INIT_40G); + if (err) + dev_err(&phydev->mdio.dev, "Setting AN register 0x%02x on lane %d failed with error code: 0x%08x \n", g_an_AD1, xgkr_inst->xgkr[i].idx, err); + } + udelay(1); + err = xgkr_phy_write_mmd(xgkr, MDIO_MMD_AN, MDIO_CTRL1, AN_CTRL_INIT); + if (err) + dev_err(&phydev->mdio.dev, "Setting AN register 0x%02x on Master Lane failed with error code: 0x%08x \n", MDIO_CTRL1, err); + } + break; + } +} + +static void start_1gkx_an(struct phy_device *phydev) +{ + phy_write_mmd(phydev, MDIO_MMD_PCS, KX_PCS_IF_MODE, KX_IF_MODE_INIT); + phy_write_mmd(phydev, MDIO_MMD_AN, g_an_AD1, KX_AN_AD1_INIT); + phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, AN_CTRL_INIT); +} + +static void reset_tecr(struct xgkr_params *xgkr) +{ + struct phy_device *phydev = xgkr->phydev; + struct xgkr_phy_data *xgkr_inst = phydev->priv; + + switch (xgkr_inst->bp_mode) + { + case PHY_BACKPLANE_1000BASE_KX: + dev_err(&phydev->mdio.dev, "Wrong call path for 1000Base-KX \n"); + break; + + case PHY_BACKPLANE_10GBASE_KR: + xgkr->ratio_preq = RATIO_PREQ_10G; + xgkr->ratio_pst1q = RATIO_PST1Q_10G; + xgkr->adpt_eq = RATIO_EQ_10G; + break; + + case PHY_BACKPLANE_40GBASE_KR: + xgkr->ratio_preq = RATIO_PREQ_40G; + xgkr->ratio_pst1q = RATIO_PST1Q_40G; + xgkr->adpt_eq = RATIO_EQ_40G; + break; + } + + tune_tecr(xgkr); +} + +static void init_xgkr(struct xgkr_params *xgkr, int reset) +{ + if (reset) + reset_tecr(xgkr); + + tx_condition_init(&xgkr->tx_c); + xgkr->state = DETECTING_LP; + + xgkr->ld_status &= RX_READY_MASK; + ld_coe_status(xgkr); + xgkr->ld_update = 0; + xgkr->ld_status &= ~RX_READY_MASK; + ld_coe_status(xgkr); + +} + +static void initialize(struct xgkr_params *xgkr) +{ + reset_tecr(xgkr); + + xgkr->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); + xgkr->ld_status |= COE_UPDATED << COP1_SHIFT | + COE_UPDATED << COZ_SHIFT | + COE_UPDATED << COM1_SHIFT; + ld_coe_status(xgkr); +} + +static void train_remote_tx(struct xgkr_params *xgkr) +{ + struct tx_condition *tx_c = &xgkr->tx_c; + bool bin_m1_early, bin_long_early; + u32 lp_status, old_ld_update; + u32 status_cop1, status_coz, status_com1; + u32 req_cop1, req_coz, req_com1, req_preset, req_init; + u32 temp; +#ifdef NEW_ALGORITHM_TRAIN_TX + u32 median_gaink2; +#endif + +recheck: + if (tx_c->bin_long_stop && tx_c->bin_m1_stop) { + tx_c->tx_complete = true; + xgkr->ld_status |= RX_READY_MASK; + ld_coe_status(xgkr); + + /* tell LP we are ready */ + xgkr_phy_write_mmd(xgkr, lt_MDIO_MMD, + lt_KR_PMD_STATUS, RX_STAT); + + return; + } + + /* We start by checking the current LP status. If we got any responses, + * we can clear up the appropriate update request so that the + * subsequent code may easily issue new update requests if needed. + */ + lp_status = xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, lt_KR_LP_STATUS) & + REQUEST_MASK; + + status_cop1 = (lp_status & COP1_MASK) >> COP1_SHIFT; + status_coz = (lp_status & COZ_MASK) >> COZ_SHIFT; + status_com1 = (lp_status & COM1_MASK) >> COM1_SHIFT; + + old_ld_update = xgkr->ld_update; + req_cop1 = (old_ld_update & COP1_MASK) >> COP1_SHIFT; + req_coz = (old_ld_update & COZ_MASK) >> COZ_SHIFT; + req_com1 = (old_ld_update & COM1_MASK) >> COM1_SHIFT; + req_preset = old_ld_update & PRESET_MASK; + req_init = old_ld_update & INIT_MASK; + + /* IEEE802.3-2008, 72.6.10.2.3.1 + * We may clear PRESET when all coefficients show UPDATED or MAX. + */ + if (req_preset) { + if ((status_cop1 == COE_UPDATED || status_cop1 == COE_MAX) && + (status_coz == COE_UPDATED || status_coz == COE_MAX) && + (status_com1 == COE_UPDATED || status_com1 == COE_MAX)) { + xgkr->ld_update &= ~PRESET_MASK; + } + } + + /* IEEE802.3-2008, 72.6.10.2.3.2 + * We may clear INITIALIZE when no coefficients show NOT UPDATED. + */ + if (req_init) { + if (status_cop1 != COE_NOTUPDATED && + status_coz != COE_NOTUPDATED && + status_com1 != COE_NOTUPDATED) { + xgkr->ld_update &= ~INIT_MASK; + } + } + + /* IEEE802.3-2008, 72.6.10.2.3.2 + * we send initialize to the other side to ensure default settings + * for the LP. Naturally, we should do this only once. + */ + if (!tx_c->sent_init) { + if (!lp_status && !(old_ld_update & (LD_ALL_MASK))) { + xgkr->ld_update = INIT_MASK; + tx_c->sent_init = true; + } + } + + /* IEEE802.3-2008, 72.6.10.2.3.3 + * We set coefficient requests to HOLD when we get the information + * about any updates On clearing our prior response, we also update + * our internal status. + */ + if (status_cop1 != COE_NOTUPDATED) { + if (req_cop1) { + xgkr->ld_update &= ~COP1_MASK; +#ifdef NEW_ALGORITHM_TRAIN_TX + if (tx_c->post_inc) { + if (req_cop1 == INCREMENT && + status_cop1 == COE_MAX) { + tx_c->post_inc = 0; + tx_c->bin_long_stop = true; + tx_c->bin_m1_stop = true; + } else { + tx_c->post_inc -= 1; + } + + ld_coe_update(xgkr); + goto recheck; + } +#endif + if ((req_cop1 == DECREMENT && status_cop1 == COE_MIN) || + (req_cop1 == INCREMENT && status_cop1 == COE_MAX)) { + dev_dbg(&xgkr->phydev->mdio.dev, "COP1 hit limit %s", + (status_cop1 == COE_MIN) ? + "DEC MIN" : "INC MAX"); + tx_c->long_min_max_cnt++; + if (tx_c->long_min_max_cnt >= TIMEOUT_LONG) { + tx_c->bin_long_stop = true; + ld_coe_update(xgkr); + goto recheck; + } + } + } + } + + if (status_coz != COE_NOTUPDATED) { + if (req_coz) + xgkr->ld_update &= ~COZ_MASK; + } + + if (status_com1 != COE_NOTUPDATED) { + if (req_com1) { + xgkr->ld_update &= ~COM1_MASK; +#ifdef NEW_ALGORITHM_TRAIN_TX + if (tx_c->pre_inc) { + if (req_com1 == INCREMENT && + status_com1 == COE_MAX) + tx_c->pre_inc = 0; + else + tx_c->pre_inc -= 1; + + ld_coe_update(xgkr); + goto recheck; + } +#endif + /* Stop If we have reached the limit for a parameter. */ + if ((req_com1 == DECREMENT && status_com1 == COE_MIN) || + (req_com1 == INCREMENT && status_com1 == COE_MAX)) { + dev_dbg(&xgkr->phydev->mdio.dev, "COM1 hit limit %s", + (status_com1 == COE_MIN) ? + "DEC MIN" : "INC MAX"); + tx_c->m1_min_max_cnt++; + if (tx_c->m1_min_max_cnt >= TIMEOUT_M1) { + tx_c->bin_m1_stop = true; + ld_coe_update(xgkr); + goto recheck; + } + } + } + } + + if (old_ld_update != xgkr->ld_update) { + ld_coe_update(xgkr); + /* Redo these status checks and updates until we have no more + * changes, to speed up the overall process. + */ + goto recheck; + } + + /* Do nothing if we have pending request. */ + if ((req_coz || req_com1 || req_cop1)) + return; + else if (lp_status) + /* No pending request but LP status was not reverted to + * not updated. + */ + return; + +#ifdef NEW_ALGORITHM_TRAIN_TX + if (!(xgkr->ld_update & (PRESET_MASK | INIT_MASK))) { + if (tx_c->pre_inc) { + xgkr->ld_update = INCREMENT << COM1_SHIFT; + ld_coe_update(xgkr); + return; + } + + if (status_cop1 != COE_MAX) { + median_gaink2 = xgkr->srds->get_median_gaink2(xgkr->reg_base); + if (median_gaink2 == 0xf) { + tx_c->post_inc = 1; + } else { + /* Gaink2 median lower than "F" */ + tx_c->bin_m1_stop = true; + tx_c->bin_long_stop = true; + goto recheck; + } + } else { + /* C1 MAX */ + tx_c->bin_m1_stop = true; + tx_c->bin_long_stop = true; + goto recheck; + } + + if (tx_c->post_inc) { + xgkr->ld_update = INCREMENT << COP1_SHIFT; + ld_coe_update(xgkr); + return; + } + } +#endif + + /* snapshot and select bin */ + bin_m1_early = xgkr->srds->is_bin_early(BIN_M1, xgkr->reg_base); + bin_long_early = xgkr->srds->is_bin_early(BIN_LONG, xgkr->reg_base); + + if (!tx_c->bin_m1_stop && !tx_c->bin_m1_late_early && bin_m1_early) { + tx_c->bin_m1_stop = true; + goto recheck; + } + + if (!tx_c->bin_long_stop && + tx_c->bin_long_late_early && !bin_long_early) { + tx_c->bin_long_stop = true; + goto recheck; + } + + /* IEEE802.3-2008, 72.6.10.2.3.3 + * We only request coefficient updates when no PRESET/INITIALIZE is + * pending. We also only request coefficient updates when the + * corresponding status is NOT UPDATED and nothing is pending. + */ + if (!(xgkr->ld_update & (PRESET_MASK | INIT_MASK))) { + if (!tx_c->bin_long_stop) { + /* BinM1 correction means changing COM1 */ + if (!status_com1 && !(xgkr->ld_update & COM1_MASK)) { + /* Avoid BinM1Late by requesting an + * immediate decrement. + */ + if (!bin_m1_early) { + /* request decrement c(-1) */ + temp = DECREMENT << COM1_SHIFT; + xgkr->ld_update = temp; + ld_coe_update(xgkr); + tx_c->bin_m1_late_early = bin_m1_early; + return; + } + } + + /* BinLong correction means changing COP1 */ + if (!status_cop1 && !(xgkr->ld_update & COP1_MASK)) { + /* Locate BinLong transition point (if any) + * while avoiding BinM1Late. + */ + if (bin_long_early) { + /* request increment c(1) */ + temp = INCREMENT << COP1_SHIFT; + xgkr->ld_update = temp; + } else { + /* request decrement c(1) */ + temp = DECREMENT << COP1_SHIFT; + xgkr->ld_update = temp; + } + + ld_coe_update(xgkr); + tx_c->bin_long_late_early = bin_long_early; + } + /* We try to finish BinLong before we do BinM1 */ + return; + } + + if (!tx_c->bin_m1_stop) { + /* BinM1 correction means changing COM1 */ + if (!status_com1 && !(xgkr->ld_update & COM1_MASK)) { + /* Locate BinM1 transition point (if any) */ + if (bin_m1_early) { + /* request increment c(-1) */ + temp = INCREMENT << COM1_SHIFT; + xgkr->ld_update = temp; + } else { + /* request decrement c(-1) */ + temp = DECREMENT << COM1_SHIFT; + xgkr->ld_update = temp; + } + + ld_coe_update(xgkr); + tx_c->bin_m1_late_early = bin_m1_early; + } + } + } +} + +static int is_link_up(struct phy_device *phydev) +{ + struct xgkr_phy_data *xgkr_inst = phydev->priv; + int val = 0; + + mutex_lock(&xgkr_inst->phy_lock); + + val = phy_read_mmd(phydev, MDIO_MMD_PCS, XFI_PCS_SR1); + + mutex_unlock(&xgkr_inst->phy_lock); + + return (val & KR_RX_LINK_STAT_MASK) ? 1 : 0; +} + +static int is_link_training_fail(struct xgkr_params *xgkr) +{ + struct phy_device *phydev = xgkr->phydev; + int val; + int timeout = 100; + + val = xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, lt_KR_PMD_STATUS); + + if (!(val & TRAIN_FAIL) && (val & RX_STAT)) { + /* check LNK_STAT for sure */ + while (timeout--) { + if (is_link_up(phydev)) + return 0; + + usleep_range(100, 500); + } + } + + return 1; +} + +static int check_rx(struct xgkr_params *xgkr) +{ + return xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, lt_KR_LP_STATUS) & + RX_READY_MASK; +} + +/* Coefficient values have hardware restrictions */ +static int is_ld_valid(struct xgkr_params *xgkr) +{ + u32 ratio_pst1q = xgkr->ratio_pst1q; + u32 adpt_eq = xgkr->adpt_eq; + u32 ratio_preq = xgkr->ratio_preq; + + if ((ratio_pst1q + adpt_eq + ratio_preq) > 48) + return 0; + + if (((ratio_pst1q + adpt_eq + ratio_preq) * 4) >= + ((adpt_eq - ratio_pst1q - ratio_preq) * 17)) + return 0; + + if (ratio_preq > ratio_pst1q) + return 0; + + if (ratio_preq > 8) + return 0; + + if (adpt_eq < 26) + return 0; + + if (ratio_pst1q > 16) + return 0; + + return 1; +} + +static int is_value_allowed(const u32 *val_table, u32 val) +{ + int i; + + for (i = 0;; i++) { + if (*(val_table + i) == VAL_INVALID) + return 0; + if (*(val_table + i) == val) + return 1; + } +} + +static enum coe_update inc_dec(struct xgkr_params *xgkr, int field, int request) +{ + u32 ld_limit[3], ld_coe[3], step[3]; + + ld_coe[0] = xgkr->ratio_pst1q; + ld_coe[1] = xgkr->adpt_eq; + ld_coe[2] = xgkr->ratio_preq; + + /* Information specific to the SerDes for 10GBase-KR: + * Incrementing C(+1) means *decrementing* RATIO_PST1Q + * Incrementing C(0) means incrementing ADPT_EQ + * Incrementing C(-1) means *decrementing* RATIO_PREQ + */ + step[0] = -1; + step[1] = 1; + step[2] = -1; + + switch (request) { + case INCREMENT: + ld_limit[0] = POST_COE_MAX; + ld_limit[1] = ZERO_COE_MAX; + ld_limit[2] = PRE_COE_MAX; + if (ld_coe[field] != ld_limit[field]) + ld_coe[field] += step[field]; + else + /* MAX */ + return COE_MAX; + break; + case DECREMENT: + ld_limit[0] = POST_COE_MIN; + ld_limit[1] = ZERO_COE_MIN; + ld_limit[2] = PRE_COE_MIN; + if (ld_coe[field] != ld_limit[field]) + ld_coe[field] -= step[field]; + else + /* MIN */ + return COE_MIN; + break; + default: + break; + } + + if (is_ld_valid(xgkr)) { + /* accept new ld */ + xgkr->ratio_pst1q = ld_coe[0]; + xgkr->adpt_eq = ld_coe[1]; + xgkr->ratio_preq = ld_coe[2]; + /* only some values for preq and pst1q can be used. + * for preq: 0x0, 0x1, 0x3, 0x5, 0x7, 0x9, 0xb, 0xc. + * for pst1q: 0x0, 0x1, 0x3, 0x5, 0x7, 0x9, 0xb, 0xd, 0xf, 0x10. + */ + if (!is_value_allowed((const u32 *)&preq_table, ld_coe[2])) { + dev_dbg(&xgkr->phydev->mdio.dev, + "preq skipped value: %d\n", ld_coe[2]); + /* NOT UPDATED */ + return COE_NOTUPDATED; + } + + if (!is_value_allowed((const u32 *)&pst1q_table, ld_coe[0])) { + dev_dbg(&xgkr->phydev->mdio.dev, + "pst1q skipped value: %d\n", ld_coe[0]); + /* NOT UPDATED */ + return COE_NOTUPDATED; + } + + tune_tecr(xgkr); + } else { + if (request == DECREMENT) + /* MIN */ + return COE_MIN; + if (request == INCREMENT) + /* MAX */ + return COE_MAX; + } + + /* UPDATED */ + return COE_UPDATED; +} + +static void min_max_updated(struct xgkr_params *xgkr, int field, enum coe_update cs) +{ + u32 mask, val; + u32 ld_cs = cs; + + if (cs == COE_INV) + return; + + switch (field) { + case COE_COP1: + mask = COP1_MASK; + val = ld_cs << COP1_SHIFT; + break; + case COE_COZ: + mask = COZ_MASK; + val = ld_cs << COZ_SHIFT; + break; + case COE_COM: + mask = COM1_MASK; + val = ld_cs << COM1_SHIFT; + break; + default: + return; + } + + xgkr->ld_status &= ~mask; + xgkr->ld_status |= val; +} + +static void check_request(struct xgkr_params *xgkr, int request) +{ + int cop1_req, coz_req, com_req; + int old_status; + enum coe_update cu; + + cop1_req = (request & COP1_MASK) >> COP1_SHIFT; + coz_req = (request & COZ_MASK) >> COZ_SHIFT; + com_req = (request & COM1_MASK) >> COM1_SHIFT; + + /* IEEE802.3-2008, 72.6.10.2.5 + * Ensure we only act on INCREMENT/DECREMENT when we are in NOT UPDATED + */ + old_status = xgkr->ld_status; + + if (cop1_req && !(xgkr->ld_status & COP1_MASK)) { + cu = inc_dec(xgkr, COE_COP1, cop1_req); + min_max_updated(xgkr, COE_COP1, cu); + } + + if (coz_req && !(xgkr->ld_status & COZ_MASK)) { + cu = inc_dec(xgkr, COE_COZ, coz_req); + min_max_updated(xgkr, COE_COZ, cu); + } + + if (com_req && !(xgkr->ld_status & COM1_MASK)) { + cu = inc_dec(xgkr, COE_COM, com_req); + min_max_updated(xgkr, COE_COM, cu); + } + + if (old_status != xgkr->ld_status) + ld_coe_status(xgkr); +} + +static void preset(struct xgkr_params *xgkr) +{ + /* These are all MAX values from the IEEE802.3 perspective. */ + xgkr->ratio_pst1q = POST_COE_MAX; + xgkr->adpt_eq = ZERO_COE_MAX; + xgkr->ratio_preq = PRE_COE_MAX; + + tune_tecr(xgkr); + xgkr->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); + xgkr->ld_status |= COE_MAX << COP1_SHIFT | + COE_MAX << COZ_SHIFT | + COE_MAX << COM1_SHIFT; + ld_coe_status(xgkr); +} + +static void train_local_tx(struct xgkr_params *xgkr) +{ + int request, old_ld_status; + + /* get request from LP */ + request = xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, lt_KR_LP_CU) & + (LD_ALL_MASK); + + old_ld_status = xgkr->ld_status; + + /* IEEE802.3-2008, 72.6.10.2.5 + * Ensure we always go to NOT UDPATED for status reporting in + * response to HOLD requests. + * IEEE802.3-2008, 72.6.10.2.3.1/2 + * ... but only if PRESET/INITIALIZE are not active to ensure + * we keep status until they are released. + */ + if (!(request & (PRESET_MASK | INIT_MASK))) { + if (!(request & COP1_MASK)) + xgkr->ld_status &= ~COP1_MASK; + + if (!(request & COZ_MASK)) + xgkr->ld_status &= ~COZ_MASK; + + if (!(request & COM1_MASK)) + xgkr->ld_status &= ~COM1_MASK; + + if (old_ld_status != xgkr->ld_status) + ld_coe_status(xgkr); + } + + /* As soon as the LP shows ready, no need to do any more updates. */ + if (check_rx(xgkr)) { + /* LP receiver is ready */ + if (xgkr->ld_status & (COP1_MASK | COZ_MASK | COM1_MASK)) { + xgkr->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); + ld_coe_status(xgkr); + } + } else { + /* IEEE802.3-2008, 72.6.10.2.3.1/2 + * only act on PRESET/INITIALIZE if all status is NOT UPDATED. + */ + if (request & (PRESET_MASK | INIT_MASK)) { + if (!(xgkr->ld_status & + (COP1_MASK | COZ_MASK | COM1_MASK))) { + if (request & PRESET_MASK) + preset(xgkr); + + if (request & INIT_MASK) + initialize(xgkr); + } + } + + /* LP Coefficient are not in HOLD */ + if (request & REQUEST_MASK) + check_request(xgkr, request & REQUEST_MASK); + } +} + +static void xgkr_start_train(struct xgkr_params *xgkr) +{ + struct phy_device *phydev = xgkr->phydev; + struct xgkr_phy_data *xgkr_inst = phydev->priv; + struct tx_condition *tx_c = &xgkr->tx_c; + int val = 0, i, j; + int lt_state; + unsigned long dead_line; + int lp_rx_ready, tx_training_complete; + u32 lt_timeout = 500; + + init_xgkr(xgkr, 0); + + start_lt(xgkr); + + if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR) { + lt_timeout = 2000; + } + + for (i = 0; i < 2;) { + + dead_line = jiffies + msecs_to_jiffies(lt_timeout); + + while (time_before(jiffies, dead_line)) { + + val = xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, + lt_KR_PMD_STATUS); + + if (val & TRAIN_FAIL) { + /* LT failed already, reset lane to avoid + * it run into hanging, then start LT again. + */ + if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR) { + /* Reset only the Master Lane */ + if (xgkr->idx == MASTER_LANE) + xgkr->srds->reset_lane(xgkr->reg_base); + } else { + xgkr->srds->reset_lane(xgkr->reg_base); + } + + start_lt(xgkr); + } else if ((val & PMD_STATUS_SUP_STAT) && + (val & PMD_STATUS_FRAME_LOCK)) + break; + usleep_range(100, 500); + } + + if (!((val & PMD_STATUS_FRAME_LOCK) && + (val & PMD_STATUS_SUP_STAT))) { + i++; + continue; + } + + /* init process */ + lp_rx_ready = false; + tx_training_complete = false; + /* the LT should be finished in 500ms, failed or OK. */ + dead_line = jiffies + msecs_to_jiffies(lt_timeout); + + while (time_before(jiffies, dead_line)) { + /* check if the LT is already failed */ + + lt_state = xgkr_phy_read_mmd(xgkr, lt_MDIO_MMD, + lt_KR_PMD_STATUS); + + if (lt_state & TRAIN_FAIL) { + + if (xgkr_inst->bp_mode == PHY_BACKPLANE_40GBASE_KR) { + /* Reset only the Master Lane */ + if (xgkr->idx == MASTER_LANE) + xgkr->srds->reset_lane(xgkr->reg_base); + } else { + xgkr->srds->reset_lane(xgkr->reg_base); + } + + break; + } + + lp_rx_ready = check_rx(xgkr); + tx_training_complete = tx_c->tx_complete; + + if (lp_rx_ready && tx_training_complete) + break; + + if (!lp_rx_ready) + train_local_tx(xgkr); + + if (!tx_training_complete) + train_remote_tx(xgkr); + + usleep_range(100, 500); + } + + i++; + /* check LT result */ + if (is_link_training_fail(xgkr)) { + init_xgkr(xgkr, 0); + continue; + } else { + stop_lt(xgkr); + xgkr->state = TRAINED; + + switch (xgkr_inst->bp_mode) + { + case PHY_BACKPLANE_10GBASE_KR: + if (phydev->attached_dev == NULL) + dev_info(&phydev->mdio.dev, "10GBase-KR link trained (Tx equalization: RATIO_PREQ = 0x%x, RATIO_PST1Q = 0x%x, ADPT_EQ = 0x%x)\n", + xgkr->tuned_ratio_preq, xgkr->tuned_ratio_pst1q, xgkr->tuned_adpt_eq); + else + dev_info(&phydev->mdio.dev, "%s %s: 10GBase-KR link trained (Tx equalization: RATIO_PREQ = 0x%x, RATIO_PST1Q = 0x%x, ADPT_EQ = 0x%x)\n", + dev_driver_string(phydev->attached_dev->dev.parent), + dev_name(phydev->attached_dev->dev.parent), + xgkr->tuned_ratio_preq, xgkr->tuned_ratio_pst1q, xgkr->tuned_adpt_eq); + break; + + case PHY_BACKPLANE_40GBASE_KR: + if (xgkr->idx == xgkr_inst->phy_lanes - 1) { + if (phydev->attached_dev == NULL) + dev_info(&phydev->mdio.dev, "40GBase-KR link trained at lanes Tx equalization:\n"); + else + dev_info(&phydev->mdio.dev, "%s %s: 40GBase-KR link trained at lanes Tx equalization:\n", + dev_driver_string(phydev->attached_dev->dev.parent), + dev_name(phydev->attached_dev->dev.parent)); + + for (j = 0; j < xgkr_inst->phy_lanes; j++) { + if (phydev->attached_dev == NULL) + dev_info(&phydev->mdio.dev, "40GBase-KR Lane %d: RATIO_PREQ = 0x%x, RATIO_PST1Q = 0x%x, ADPT_EQ = 0x%x\n", + j, xgkr_inst->xgkr[j].tuned_ratio_preq, xgkr_inst->xgkr[j].tuned_ratio_pst1q, xgkr_inst->xgkr[j].tuned_adpt_eq); + else + dev_info(&phydev->mdio.dev, "%s %s: 40GBase-KR Lane %d: RATIO_PREQ = 0x%x, RATIO_PST1Q = 0x%x, ADPT_EQ = 0x%x\n", + dev_driver_string(phydev->attached_dev->dev.parent), + dev_name(phydev->attached_dev->dev.parent), + j, xgkr_inst->xgkr[j].tuned_ratio_preq, xgkr_inst->xgkr[j].tuned_ratio_pst1q, xgkr_inst->xgkr[j].tuned_adpt_eq); + } + } + break; + } + + break; + } + } +} + +static void xgkr_request_restart_an(struct xgkr_params *xgkr) +{ + struct phy_device *phydev = xgkr->phydev; + struct xgkr_phy_data *xgkr_inst = phydev->priv; + int i; + + if (time_before(jiffies, xgkr->rt_time)) + return; + + switch (xgkr_inst->bp_mode) + { + case PHY_BACKPLANE_1000BASE_KX: + dev_err(&phydev->mdio.dev, "Wrong call path for 1000Base-KX \n"); + break; + + case PHY_BACKPLANE_10GBASE_KR: + init_xgkr(xgkr, 0); + reset_lt(xgkr); + xgkr->state = DETECTING_LP; + start_xgkr_an(xgkr); + start_xgkr_state_machine(&xgkr->xgkr_wk); + break; + + case PHY_BACKPLANE_40GBASE_KR: + for (i = 0; i < xgkr_inst->phy_lanes; i++) { + init_xgkr(&xgkr_inst->xgkr[i], 0); + reset_lt(&xgkr_inst->xgkr[i]); + xgkr_inst->xgkr[i].state = DETECTING_LP; + } + //Start AN only for Master Lane + start_xgkr_an(&xgkr_inst->xgkr[MASTER_LANE]); + //start state machine + for (i = 0; i < xgkr_inst->phy_lanes; i++) { + start_xgkr_state_machine(&xgkr_inst->xgkr[i].xgkr_wk); + } + break; + } + + xgkr->rt_time = jiffies + msecs_to_jiffies(XGKR_DENY_RT_INTERVAL); +} + +static void xgkr_state_machine(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct xgkr_params *xgkr = container_of(dwork, + struct xgkr_params, xgkr_wk); + struct phy_device *phydev = xgkr->phydev; + struct xgkr_phy_data *xgkr_inst = phydev->priv; + int an_state; + bool start_train = false; + bool all_lanes_trained = false; + int i; + + if (!xgkr_inst->aneg_done) { + start_xgkr_state_machine(&xgkr->xgkr_wk); + return; + } + + mutex_lock(&phydev->lock); + + switch (xgkr->state) { + case DETECTING_LP: + + switch (xgkr_inst->bp_mode) + { + case PHY_BACKPLANE_1000BASE_KX: + dev_err(&phydev->mdio.dev, "Wrong call path for 1000Base-KX \n"); + break; + + case PHY_BACKPLANE_10GBASE_KR: + an_state = xgkr_phy_read_mmd(xgkr, MDIO_MMD_AN, g_an_BP_STAT); + if (an_state & KR_AN_MASK_10G) { + //AN acquired: Train the lane + xgkr->an_wait_count = 0; + start_train = true; + } else { + //AN lost or not yet acquired + if (!is_link_up(phydev)) { + //Link is down: restart training + xgkr->an_wait_count = 0; + xgkr_request_restart_an(xgkr); + } else { + //Link is up: wait few iterations for AN to be acquired + if (xgkr->an_wait_count >= XGKR_AN_WAIT_ITERATIONS) { + xgkr->an_wait_count = 0; + xgkr_request_restart_an(xgkr); + } else { + xgkr->an_wait_count++; + } + } + } + break; + + case PHY_BACKPLANE_40GBASE_KR: + //Check AN state only on Master Lane + an_state = xgkr_phy_read_mmd(&xgkr_inst->xgkr[MASTER_LANE], MDIO_MMD_AN, g_an_BP_STAT); + if (an_state & KR_AN_MASK_40G) { + //AN acquired: Train all lanes in order starting with Master Lane + xgkr->an_wait_count = 0; + if (xgkr->idx == MASTER_LANE) { + start_train = true; + } + else if (xgkr_inst->xgkr[xgkr->idx - 1].state == TRAINED) { + start_train = true; + } + } else { + //AN lost or not yet acquired + if (!is_link_up(phydev)) { + //Link is down: restart training + xgkr->an_wait_count = 0; + xgkr_request_restart_an(xgkr); + } else { + //Link is up: wait few iterations for AN to be acquired + if (xgkr->an_wait_count >= XGKR_AN_WAIT_ITERATIONS) { + xgkr->an_wait_count = 0; + xgkr_request_restart_an(xgkr); + } else { + xgkr->an_wait_count++; + } + } + } + break; + } + break; + + case TRAINED: + if (!is_link_up(phydev)) { + switch (xgkr_inst->bp_mode) + { + case PHY_BACKPLANE_1000BASE_KX: + dev_err(&phydev->mdio.dev, "Wrong call path for 1000Base-KX \n"); + break; + + case PHY_BACKPLANE_10GBASE_KR: + dev_info(&phydev->mdio.dev, "Detect hotplug, restart training\n"); + xgkr_request_restart_an(xgkr); + break; + + case PHY_BACKPLANE_40GBASE_KR: + if (xgkr->idx == MASTER_LANE) { + //check if all lanes are trained only on Master Lane + all_lanes_trained = true; + for (i = 0; i < xgkr_inst->phy_lanes; i++) { + if (xgkr_inst->xgkr[i].state != TRAINED) { + all_lanes_trained = false; + break; + } + } + if (all_lanes_trained) { + dev_info(&phydev->mdio.dev, "Detect hotplug, restart training\n"); + xgkr_request_restart_an(xgkr); + } + } + break; + } + } + break; + } + + if (start_train) { + xgkr_start_train(xgkr); + } + + mutex_unlock(&phydev->lock); + start_xgkr_state_machine(&xgkr->xgkr_wk); +} + +static int fsl_backplane_probe(struct phy_device *phydev) +{ + struct xgkr_phy_data *xgkr_inst; + struct device_node *phy_node, *lane_node; + struct resource res_lane; + struct serdes_access *srds = NULL; + int serdes_type; + const char *st; + const char *bm; + int ret, i, phy_lanes; + int bp_mode; + u32 lane_base_addr[MAX_PHY_LANES_NO], lane_memmap_size; + + phy_node = phydev->mdio.dev.of_node; + if (!phy_node) { + dev_err(&phydev->mdio.dev, "No associated device tree node\n"); + return -EINVAL; + } + + bp_mode = of_property_read_string(phy_node, "backplane-mode", &bm); + if (bp_mode < 0) + return -EINVAL; + + phy_lanes = 1; + if (!strcasecmp(bm, "1000base-kx")) { + bp_mode = PHY_BACKPLANE_1000BASE_KX; + } else if (!strcasecmp(bm, "10gbase-kr")) { + bp_mode = PHY_BACKPLANE_10GBASE_KR; + } else if (!strcasecmp(bm, "40gbase-kr")) { + bp_mode = PHY_BACKPLANE_40GBASE_KR; + phy_lanes = 4; + } else { + dev_err(&phydev->mdio.dev, "Unknown backplane-mode\n"); + return -EINVAL; + } + + lane_node = of_parse_phandle(phy_node, "fsl,lane-handle", 0); + if (!lane_node) { + dev_err(&phydev->mdio.dev, "parse fsl,lane-handle failed\n"); + return -EINVAL; + } + + ret = of_property_read_string(lane_node, "compatible", &st); + if (ret < 0) { + //assume SERDES-10G if compatible property is not specified + serdes_type = SERDES_10G; + } + else if (!strcasecmp(st, "fsl,serdes-10g")) { + serdes_type = SERDES_10G; + } else if (!strcasecmp(st, "fsl,serdes-28g")) { + serdes_type = SERDES_28G; + } else { + dev_err(&phydev->mdio.dev, "Unknown serdes-type\n"); + return -EINVAL; + } + + ret = of_address_to_resource(lane_node, 0, &res_lane); + if (ret) { + dev_err(&phydev->mdio.dev, "could not obtain memory map\n"); + return ret; + } + + of_node_put(lane_node); + ret = of_property_read_u32_array(phy_node, "fsl,lane-reg", + (u32 *)lane_base_addr, phy_lanes); + if (ret) { + dev_err(&phydev->mdio.dev, "could not get fsl,lane-reg\n"); + return -EINVAL; + } + + switch (serdes_type) + { + case SERDES_10G: + setup_an_lt_ls(); + srds = setup_serdes_access_10g(); + break; + + case SERDES_28G: + setup_an_lt_lx(); + srds = setup_serdes_access_28g(); + break; + + default: + dev_err(&phydev->mdio.dev, "Unsupported serdes-type\n"); + return -EINVAL; + } + + if (!srds) { + dev_err(&phydev->mdio.dev, "Unsupported serdes-type\n"); + return -EINVAL; + } + + srds->serdes_type = serdes_type; + srds->is_little_endian = of_property_read_bool(lane_node, "little-endian"); + + if (srds->is_little_endian) { + srds->ioread32 = le_ioread32; + srds->iowrite32 = le_iowrite32; + } else { + srds->ioread32 = be_ioread32; + srds->iowrite32 = be_iowrite32; + } + + xgkr_inst = devm_kzalloc(&phydev->mdio.dev, + sizeof(*xgkr_inst), GFP_KERNEL); + if (!xgkr_inst) + return -ENOMEM; + + xgkr_inst->phy_lanes = phy_lanes; + xgkr_inst->bp_mode = bp_mode; + mutex_init(&xgkr_inst->phy_lock); + + lane_memmap_size = srds->get_lane_memmap_size(); + + for (i = 0; i < phy_lanes; i++) { + xgkr_inst->xgkr[i].idx = i; + xgkr_inst->xgkr[i].phydev = phydev; + xgkr_inst->xgkr[i].srds = srds; + xgkr_inst->xgkr[i].reg_base = devm_ioremap_nocache(&phydev->mdio.dev, + res_lane.start + lane_base_addr[i], + lane_memmap_size); + if (!xgkr_inst->xgkr[i].reg_base) { + dev_err(&phydev->mdio.dev, "ioremap_nocache failed\n"); + return -ENOMEM; + } + xgkr_inst->xgkr[i].rt_time = jiffies + msecs_to_jiffies(XGKR_DENY_RT_INTERVAL); + } + + phydev->priv = xgkr_inst; + + switch (bp_mode) + { + case PHY_BACKPLANE_1000BASE_KX: + phydev->speed = SPEED_1000; + /* configure the lane for 1000BASE-KX */ + srds->lane_set_1gkx(xgkr_inst->xgkr[SINGLE_LANE].reg_base); + break; + + case PHY_BACKPLANE_10GBASE_KR: + phydev->speed = SPEED_10000; + INIT_DELAYED_WORK(&xgkr_inst->xgkr[SINGLE_LANE].xgkr_wk, xgkr_state_machine); + break; + + case PHY_BACKPLANE_40GBASE_KR: + phydev->speed = SPEED_40000; + for (i = 0; i < phy_lanes; i++) + INIT_DELAYED_WORK(&xgkr_inst->xgkr[i].xgkr_wk, xgkr_state_machine); + break; + } + + return 0; +} + +static int fsl_backplane_aneg_done(struct phy_device *phydev) +{ + struct xgkr_phy_data *xgkr_inst = phydev->priv; + + if (!phydev->mdio.dev.of_node) { + dev_err(&phydev->mdio.dev, "No associated device tree node\n"); + return -EINVAL; + } + + xgkr_inst->aneg_done = true; + + return 1; +} + +static int fsl_backplane_config_aneg(struct phy_device *phydev) +{ + struct xgkr_phy_data *xgkr_inst = phydev->priv; + int i; + + if (!phydev->mdio.dev.of_node) { + dev_err(&phydev->mdio.dev, "No associated device tree node\n"); + return -EINVAL; + } + + switch (phydev->speed) + { + case SPEED_1000: + phydev->supported |= SUPPORTED_1000baseKX_Full; + start_1gkx_an(phydev); + break; + + case SPEED_10000: + phydev->supported |= SUPPORTED_10000baseKR_Full; + reset_lt(&xgkr_inst->xgkr[SINGLE_LANE]); + start_xgkr_an(&xgkr_inst->xgkr[SINGLE_LANE]); + /* start state machine*/ + start_xgkr_state_machine(&xgkr_inst->xgkr[SINGLE_LANE].xgkr_wk); + break; + + case SPEED_40000: + phydev->supported |= SUPPORTED_40000baseKR4_Full; + for (i = 0; i < xgkr_inst->phy_lanes; i++) { + reset_lt(&xgkr_inst->xgkr[i]); + } + //Start AN only for Master Lane + start_xgkr_an(&xgkr_inst->xgkr[MASTER_LANE]); + /* start state machine*/ + for (i = 0; i < xgkr_inst->phy_lanes; i++) { + start_xgkr_state_machine(&xgkr_inst->xgkr[i].xgkr_wk); + } + + break; + } + + phydev->advertising = phydev->supported; + phydev->duplex = 1; + + return 0; +} + +static int fsl_backplane_suspend(struct phy_device *phydev) +{ + int i; + + if (!phydev->mdio.dev.of_node) { + dev_err(&phydev->mdio.dev, "No associated device tree node\n"); + return -EINVAL; + } + + if (phydev->speed == SPEED_10000 || phydev->speed == SPEED_40000) { + struct xgkr_phy_data *xgkr_inst = phydev->priv; + + for (i = 0; i < xgkr_inst->phy_lanes; i++) + cancel_delayed_work_sync(&xgkr_inst->xgkr[i].xgkr_wk); + } + return 0; +} + +static int fsl_backplane_resume(struct phy_device *phydev) +{ + struct xgkr_phy_data *xgkr_inst = phydev->priv; + int i; + + if (!phydev->mdio.dev.of_node) { + dev_err(&phydev->mdio.dev, "No associated device tree node\n"); + return -EINVAL; + } + + if (phydev->speed == SPEED_10000 || phydev->speed == SPEED_40000) { + for (i = 0; i < xgkr_inst->phy_lanes; i++) { + init_xgkr(&xgkr_inst->xgkr[i], 1); + start_xgkr_state_machine(&xgkr_inst->xgkr[i].xgkr_wk); + } + } + return 0; +} + +static int fsl_backplane_read_status(struct phy_device *phydev) +{ + if (!phydev->mdio.dev.of_node) { + dev_err(&phydev->mdio.dev, "No associated device tree node\n"); + return -EINVAL; + } + + if (is_link_up(phydev)) + phydev->link = 1; + else + phydev->link = 0; + + return 0; +} + +static int fsl_backplane_match_phy_device(struct phy_device *phydev) +{ + struct device_node *phy_node, *lane_node; + const char *st; + int serdes_type, i, ret; + const int num_ids = ARRAY_SIZE(phydev->c45_ids.device_ids); + + if (!phydev->mdio.dev.of_node) { + return 0; + } + + // WORKAROUND: + // Required for LX2 devices + // where PHY ID cannot be verified in PCS + // because PCS Device Identifier Upper and Lower registers are hidden + // and always return 0 when they are read: + // 2 02 Device_ID0 RO Bits 15:0 0 + // val = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x2); + // 3 03 Device_ID1 RO Bits 31:16 0 + // val = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x3); + // + // To be removed: After the issue will be fixed on LX2 devices + + if (!phydev->is_c45) + return 0; + + phy_node = phydev->mdio.dev.of_node; + + lane_node = of_parse_phandle(phy_node, "fsl,lane-handle", 0); + if (!lane_node) { + dev_err(&phydev->mdio.dev, "parse fsl,lane-handle failed\n"); + return 0; + } + + ret = of_property_read_string(lane_node, "compatible", &st); + if (ret < 0) { + //assume SERDES-10G if compatible property is not specified + serdes_type = SERDES_10G; + } + else if (!strcasecmp(st, "fsl,serdes-10g")) { + serdes_type = SERDES_10G; + } else if (!strcasecmp(st, "fsl,serdes-28g")) { + serdes_type = SERDES_28G; + } else { + dev_err(&phydev->mdio.dev, "Unknown serdes-type\n"); + return 0; + } + + if (serdes_type == SERDES_10G) { + //On LS devices we must find the c45 device with correct PHY ID + //Implementation similar with the one existent in phy_device: @function: phy_bus_match + for (i = 1; i < num_ids; i++) { + if (!(phydev->c45_ids.devices_in_package & (1 << i))) + continue; + + if ((PCS_PHY_DEVICE_ID & PCS_PHY_DEVICE_ID_MASK) == + (phydev->c45_ids.device_ids[i] & PCS_PHY_DEVICE_ID_MASK)) + { + return 1; + } + } + return 0; + } + + //On LX devices we cannot verify PHY ID + //so we are happy only with preliminary verifications already made: mdio.dev.of_node and is_c45 + //because we already filtered other undesired devices: non clause 45 + + return 1; +} + +static struct phy_driver fsl_backplane_driver[] = { + { + .phy_id = PCS_PHY_DEVICE_ID, + .name = "Freescale Backplane", + .phy_id_mask = PCS_PHY_DEVICE_ID_MASK, + .features = SUPPORTED_Backplane | SUPPORTED_Autoneg | + SUPPORTED_MII, + .probe = fsl_backplane_probe, + .aneg_done = fsl_backplane_aneg_done, + .config_aneg = fsl_backplane_config_aneg, + .read_status = fsl_backplane_read_status, + .suspend = fsl_backplane_suspend, + .resume = fsl_backplane_resume, + .match_phy_device = fsl_backplane_match_phy_device, + }, +}; + +module_phy_driver(fsl_backplane_driver); + +static struct mdio_device_id __maybe_unused freescale_tbl[] = { + { PCS_PHY_DEVICE_ID, PCS_PHY_DEVICE_ID_MASK }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, freescale_tbl); + +MODULE_DESCRIPTION("Freescale Backplane driver"); +MODULE_AUTHOR("Shaohui Xie "); +MODULE_LICENSE("GPL v2"); --- /dev/null +++ b/drivers/net/phy/fsl_backplane.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * DPAA backplane driver. + * Author: Florinel Iordache + * + * Copyright 2018 NXP + * + * Licensed under the GPL-2 or later. + */ + +#ifndef FSL_BACKPLANE_H +#define FSL_BACKPLANE_H + +/* C(-1) */ +#define BIN_M1 0 +/* C(1) */ +#define BIN_LONG 1 + +#define BIN_SNAPSHOT_NUM 5 +#define BIN_M1_THRESHOLD 3 +#define BIN_LONG_THRESHOLD 2 + +struct serdes_access { + + int serdes_type; + bool is_little_endian; + u32 (*ioread32)(u32 *reg); + void (*iowrite32)(u32 value, u32 *reg); + u32 (*get_lane_memmap_size)(void); + void (*tune_tecr)(void *reg, u32 ratio_preq, u32 ratio_pst1q, u32 adpt_eq, bool reset); + void (*reset_lane)(void *reg); + void (*lane_set_1gkx)(void *reg); + int (*get_median_gaink2)(u32 *reg); + bool (*is_bin_early)(int bin_sel, void *reg); +}; + +struct serdes_access* setup_serdes_access_10g(void); +struct serdes_access* setup_serdes_access_28g(void); + + +#endif //FSL_BACKPLANE_H --- /dev/null +++ b/drivers/net/phy/fsl_backplane_serdes_10g.c @@ -0,0 +1,281 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * DPAA backplane driver for SerDes 10G. + * Author: Florinel Iordache + * + * Copyright 2018 NXP + * + * Licensed under the GPL-2 or later. + */ + +#include +#include + +#include "fsl_backplane.h" + +#define BIN_M1_SEL 6 +#define BIN_Long_SEL 7 +#define CDR_SEL_MASK 0x00070000 + +#define PRE_COE_SHIFT 22 +#define POST_COE_SHIFT 16 +#define ZERO_COE_SHIFT 8 + +#define TECR0_INIT 0x24200000 + +#define GCR0_RESET_MASK 0x00600000 + +#define GCR1_SNP_START_MASK 0x00000040 +#define GCR1_CTL_SNP_START_MASK 0x00002000 + +#define RECR1_CTL_SNP_DONE_MASK 0x00000002 +#define RECR1_SNP_DONE_MASK 0x00000004 +#define TCSR1_SNP_DATA_MASK 0x0000ffc0 +#define TCSR1_SNP_DATA_SHIFT 6 +#define TCSR1_EQ_SNPBIN_SIGN_MASK 0x100 + +#define RECR1_GAINK2_MASK 0x0f000000 +#define RECR1_GAINK2_SHIFT 24 + +/* Required only for 1000BASE KX */ +#define GCR1_REIDL_TH_MASK 0x00700000 +#define GCR1_REIDL_EX_SEL_MASK 0x000c0000 +#define GCR1_REIDL_ET_MAS_MASK 0x00004000 +#define TECR0_AMP_RED_MASK 0x0000003f + +struct per_lane_ctrl_status { + u32 gcr0; /* 0x.000 - General Control Register 0 */ + u32 gcr1; /* 0x.004 - General Control Register 1 */ + u32 gcr2; /* 0x.008 - General Control Register 2 */ + u32 resv1; /* 0x.00C - Reserved */ + u32 recr0; /* 0x.010 - Receive Equalization Control Register 0 */ + u32 recr1; /* 0x.014 - Receive Equalization Control Register 1 */ + u32 tecr0; /* 0x.018 - Transmit Equalization Control Register 0 */ + u32 resv2; /* 0x.01C - Reserved */ + u32 tlcr0; /* 0x.020 - TTL Control Register 0 */ + u32 tlcr1; /* 0x.024 - TTL Control Register 1 */ + u32 tlcr2; /* 0x.028 - TTL Control Register 2 */ + u32 tlcr3; /* 0x.02C - TTL Control Register 3 */ + u32 tcsr0; /* 0x.030 - Test Control/Status Register 0 */ + u32 tcsr1; /* 0x.034 - Test Control/Status Register 1 */ + u32 tcsr2; /* 0x.038 - Test Control/Status Register 2 */ + u32 tcsr3; /* 0x.03C - Test Control/Status Register 3 */ +}; + +static struct serdes_access srds; + +static u32 get_lane_memmap_size(void) +{ + return 0x40; +} + +static void reset_lane(void *reg) +{ + struct per_lane_ctrl_status *reg_base = reg; + + /* reset the lane */ + srds.iowrite32(srds.ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); + + /* unreset the lane */ + srds.iowrite32(srds.ioread32(®_base->gcr0) | GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); +} + +static void tune_tecr(void *reg, u32 ratio_preq, u32 ratio_pst1q, u32 adpt_eq, bool reset) +{ + struct per_lane_ctrl_status *reg_base = reg; + u32 val; + + val = TECR0_INIT | + adpt_eq << ZERO_COE_SHIFT | + ratio_preq << PRE_COE_SHIFT | + ratio_pst1q << POST_COE_SHIFT; + + if (reset) { + /* reset the lane */ + srds.iowrite32(srds.ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); + } + + srds.iowrite32(val, ®_base->tecr0); + udelay(1); + + if (reset) { + /* unreset the lane */ + srds.iowrite32(srds.ioread32(®_base->gcr0) | GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); + } +} + +static void lane_set_1gkx(void *reg) +{ + struct per_lane_ctrl_status *reg_base = reg; + u32 val; + + /* reset the lane */ + srds.iowrite32(srds.ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); + + /* set gcr1 for 1GKX */ + val = srds.ioread32(®_base->gcr1); + val &= ~(GCR1_REIDL_TH_MASK | GCR1_REIDL_EX_SEL_MASK | + GCR1_REIDL_ET_MAS_MASK); + srds.iowrite32(val, ®_base->gcr1); + udelay(1); + + /* set tecr0 for 1GKX */ + val = srds.ioread32(®_base->tecr0); + val &= ~TECR0_AMP_RED_MASK; + srds.iowrite32(val, ®_base->tecr0); + udelay(1); + + /* unreset the lane */ + srds.iowrite32(srds.ioread32(®_base->gcr0) | GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); +} + +static int get_median_gaink2(u32 *reg) +{ + int gaink2_snap_shot[BIN_SNAPSHOT_NUM]; + u32 rx_eq_snp; + struct per_lane_ctrl_status *reg_base; + int timeout; + int i, j, tmp, pos; + + reg_base = (struct per_lane_ctrl_status *)reg; + + for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { + /* wait RECR1_CTL_SNP_DONE_MASK has cleared */ + timeout = 100; + while (srds.ioread32(®_base->recr1) & + RECR1_CTL_SNP_DONE_MASK) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* start snap shot */ + srds.iowrite32((srds.ioread32(®_base->gcr1) | + GCR1_CTL_SNP_START_MASK), + ®_base->gcr1); + + /* wait for SNP done */ + timeout = 100; + while (!(srds.ioread32(®_base->recr1) & + RECR1_CTL_SNP_DONE_MASK)) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* read and save the snap shot */ + rx_eq_snp = srds.ioread32(®_base->recr1); + gaink2_snap_shot[i] = (rx_eq_snp & RECR1_GAINK2_MASK) >> + RECR1_GAINK2_SHIFT; + + /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ + srds.iowrite32((srds.ioread32(®_base->gcr1) & + ~GCR1_CTL_SNP_START_MASK), + ®_base->gcr1); + } + + /* get median of the 5 snap shot */ + for (i = 0; i < BIN_SNAPSHOT_NUM - 1; i++) { + tmp = gaink2_snap_shot[i]; + pos = i; + for (j = i + 1; j < BIN_SNAPSHOT_NUM; j++) { + if (gaink2_snap_shot[j] < tmp) { + tmp = gaink2_snap_shot[j]; + pos = j; + } + } + + gaink2_snap_shot[pos] = gaink2_snap_shot[i]; + gaink2_snap_shot[i] = tmp; + } + + return gaink2_snap_shot[2]; +} + +static bool is_bin_early(int bin_sel, void *reg) +{ + bool early = false; + int bin_snap_shot[BIN_SNAPSHOT_NUM]; + int i, negative_count = 0; + struct per_lane_ctrl_status *reg_base = reg; + int timeout; + + for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { + /* wait RECR1_SNP_DONE_MASK has cleared */ + timeout = 100; + while ((srds.ioread32(®_base->recr1) & RECR1_SNP_DONE_MASK)) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* set TCSR1[CDR_SEL] to BinM1/BinLong */ + if (bin_sel == BIN_M1) { + srds.iowrite32((srds.ioread32(®_base->tcsr1) & + ~CDR_SEL_MASK) | BIN_M1_SEL, + ®_base->tcsr1); + } else { + srds.iowrite32((srds.ioread32(®_base->tcsr1) & + ~CDR_SEL_MASK) | BIN_Long_SEL, + ®_base->tcsr1); + } + + /* start snap shot */ + srds.iowrite32(srds.ioread32(®_base->gcr1) | GCR1_SNP_START_MASK, + ®_base->gcr1); + + /* wait for SNP done */ + timeout = 100; + while (!(srds.ioread32(®_base->recr1) & RECR1_SNP_DONE_MASK)) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* read and save the snap shot */ + bin_snap_shot[i] = (srds.ioread32(®_base->tcsr1) & + TCSR1_SNP_DATA_MASK) >> TCSR1_SNP_DATA_SHIFT; + if (bin_snap_shot[i] & TCSR1_EQ_SNPBIN_SIGN_MASK) + negative_count++; + + /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ + srds.iowrite32(srds.ioread32(®_base->gcr1) & ~GCR1_SNP_START_MASK, + ®_base->gcr1); + } + + if (((bin_sel == BIN_M1) && (negative_count > BIN_M1_THRESHOLD)) || + ((bin_sel == BIN_LONG && (negative_count > BIN_LONG_THRESHOLD)))) { + early = true; + } + + return early; +} + +struct serdes_access* setup_serdes_access_10g(void) +{ + srds.get_lane_memmap_size = get_lane_memmap_size; + srds.tune_tecr = tune_tecr; + srds.reset_lane = reset_lane; + srds.lane_set_1gkx = lane_set_1gkx; + srds.get_median_gaink2 = get_median_gaink2; + srds.is_bin_early = is_bin_early; + + return &srds; +} + --- /dev/null +++ b/drivers/net/phy/fsl_backplane_serdes_28g.c @@ -0,0 +1,336 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * DPAA backplane driver for SerDes 28G. + * Author: Florinel Iordache + * + * Copyright 2018 NXP + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include + +#include "fsl_backplane.h" + +#define BIN_M1_SEL 0x0000c000 +#define BIN_Long_SEL 0x0000d000 +#define CDR_SEL_MASK 0x0000f000 + +#define PRE_COE_SHIFT 16 +#define POST_COE_SHIFT 8 +#define ZERO_COE_SHIFT 24 + +#define TECR0_INIT 0x20808000 + +#define RESET_REQ_MASK 0x80000000 + +#define RECR3_SNP_START_MASK 0x80000000 +#define RECR3_SNP_DONE_MASK 0x40000000 + +#define RECR4_SNP_DATA_MASK 0x000003ff +#define RECR4_SNP_DATA_SHIFT 0 +#define RECR4_EQ_SNPBIN_SIGN_MASK 0x200 + +#define RECR3_GAINK2_MASK 0x1f000000 +#define RECR3_GAINK2_SHIFT 24 + +/* Required only for 1000BASE KX */ +#define GCR1_REIDL_TH_MASK 0x00700000 +#define GCR1_REIDL_EX_SEL_MASK 0x000c0000 +#define GCR1_REIDL_ET_MAS_MASK 0x04000000 +#define TECR0_AMP_RED_MASK 0x0000003f + +struct per_lane_ctrl_status { + u32 gcr0; /* 0x.000 - General Control Register 0 */ + u32 resv1; /* 0x.004 - Reserved */ + u32 resv2; /* 0x.008 - Reserved */ + u32 resv3; /* 0x.00C - Reserved */ + u32 resv4; /* 0x.010 - Reserved */ + u32 resv5; /* 0x.014 - Reserved */ + u32 resv6; /* 0x.018 - Reserved */ + u32 resv7; /* 0x.01C - Reserved */ + u32 trstctl; /* 0x.020 - TX Reset Control Register */ + u32 tgcr0; /* 0x.024 - TX General Control Register 0 */ + u32 tgcr1; /* 0x.028 - TX General Control Register 1 */ + u32 tgcr2; /* 0x.02C - TX General Control Register 2 */ + u32 tecr0; /* 0x.030 - Transmit Equalization Control Register 0 */ + u32 tecr1; /* 0x.034 - Transmit Equalization Control Register 1 */ + u32 resv8; /* 0x.038 - Reserved */ + u32 resv9; /* 0x.03C - Reserved */ + u32 rrstctl; /* 0x.040 - RX Reset Control Register */ + u32 rgcr0; /* 0x.044 - RX General Control Register 0 */ + u32 rxgcr1; /* 0x.048 - RX General Control Register 1 */ + u32 resv10; /* 0x.04C - Reserved */ + u32 recr0; /* 0x.050 - RX Equalization Register 0 */ + u32 recr1; /* 0x.054 - RX Equalization Register 1 */ + u32 recr2; /* 0x.058 - RX Equalization Register 2 */ + u32 recr3; /* 0x.05C - RX Equalization Register 3 */ + u32 recr4; /* 0x.060 - RX Equalization Register 4 */ + u32 resv11; /* 0x.064 - Reserved */ + u32 rccr0; /* 0x.068 - RX Calibration Register 0 */ + u32 rccr1; /* 0x.06C - RX Calibration Register 1 */ + u32 rcpcr0; /* 0x.070 - RX Clock Path Register 0 */ + u32 rsccr0; /* 0x.074 - RX Sampler Calibration Control Register 0 */ + u32 rsccr1; /* 0x.078 - RX Sampler Calibration Control Register 1 */ + u32 resv12; /* 0x.07C - Reserved */ + u32 ttlcr0; /* 0x.080 - Transition Tracking Loop Register 0 */ + u32 ttlcr1; /* 0x.084 - Transition Tracking Loop Register 1 */ + u32 ttlcr2; /* 0x.088 - Transition Tracking Loop Register 2 */ + u32 ttlcr3; /* 0x.08C - Transition Tracking Loop Register 3 */ + u32 resv13; /* 0x.090 - Reserved */ + u32 resv14; /* 0x.094 - Reserved */ + u32 resv15; /* 0x.098 - Reserved */ + u32 resv16; /* 0x.09C - Reserved */ + u32 tcsr0; /* 0x.0A0 - Test Control/Status Register 0 */ + u32 tcsr1; /* 0x.0A4 - Test Control/Status Register 1 */ + u32 tcsr2; /* 0x.0A8 - Test Control/Status Register 2 */ + u32 tcsr3; /* 0x.0AC - Test Control/Status Register 3 */ + u32 tcsr4; /* 0x.0B0 - Test Control/Status Register 4 */ + u32 resv17; /* 0x.0B4 - Reserved */ + u32 resv18; /* 0x.0B8 - Reserved */ + u32 resv19; /* 0x.0BC - Reserved */ + u32 rxcb0; /* 0x.0C0 - RX Control Block Register 0 */ + u32 rxcb1; /* 0x.0C4 - RX Control Block Register 1 */ + u32 resv20; /* 0x.0C8 - Reserved */ + u32 resv21; /* 0x.0CC - Reserved */ + u32 rxss0; /* 0x.0D0 - RX Speed Switch Register 0 */ + u32 rxss1; /* 0x.0D4 - RX Speed Switch Register 1 */ + u32 rxss2; /* 0x.0D8 - RX Speed Switch Register 2 */ + u32 resv22; /* 0x.0DC - Reserved */ + u32 txcb0; /* 0x.0E0 - TX Control Block Register 0 */ + u32 txcb1; /* 0x.0E4 - TX Control Block Register 1 */ + u32 resv23; /* 0x.0E8 - Reserved */ + u32 resv24; /* 0x.0EC - Reserved */ + u32 txss0; /* 0x.0F0 - TX Speed Switch Register 0 */ + u32 txss1; /* 0x.0F4 - TX Speed Switch Register 1 */ + u32 txss2; /* 0x.0F8 - TX Speed Switch Register 2 */ + u32 resv25; /* 0x.0FC - Reserved */ +}; + +static struct serdes_access srds; + +static u32 get_lane_memmap_size(void) +{ + return 0x100; +} + +static void reset_lane(void *reg) +{ + struct per_lane_ctrl_status *reg_base = reg; + u32 val; + unsigned long timeout; + + /* reset Tx lane: send reset request */ + srds.iowrite32(srds.ioread32(®_base->trstctl) | RESET_REQ_MASK, + ®_base->trstctl); + udelay(1); + timeout = 10; + while (timeout--) { + val = srds.ioread32(®_base->trstctl); + if (!(val & RESET_REQ_MASK)) + break; + usleep_range(5, 20); + } + + /* reset Rx lane: send reset request */ + srds.iowrite32(srds.ioread32(®_base->rrstctl) | RESET_REQ_MASK, + ®_base->rrstctl); + udelay(1); + timeout = 10; + while (timeout--) { + val = srds.ioread32(®_base->rrstctl); + if (!(val & RESET_REQ_MASK)) + break; + usleep_range(5, 20); + } + + /* wait for a while after reset */ + timeout = jiffies + 10; + while (time_before(jiffies, timeout)) { + schedule(); + usleep_range(5, 20); + } +} + +static void tune_tecr(void *reg, u32 ratio_preq, u32 ratio_pst1q, u32 adpt_eq, bool reset) +{ + struct per_lane_ctrl_status *reg_base = reg; + u32 val; + + if (reset) { + /* reset lanes */ + reset_lane(reg); + } + + val = TECR0_INIT | + ratio_preq << PRE_COE_SHIFT | + ratio_pst1q << POST_COE_SHIFT; + srds.iowrite32(val, ®_base->tecr0); + + val = adpt_eq << ZERO_COE_SHIFT; + srds.iowrite32(val, ®_base->tecr1); + + udelay(1); +} + +static void lane_set_1gkx(void *reg) +{ + struct per_lane_ctrl_status *reg_base = reg; + u32 val; + + /* reset lanes */ + reset_lane(reg); + + /* set gcr1 for 1GKX */ + val = srds.ioread32(®_base->rxgcr1); + val &= ~(GCR1_REIDL_TH_MASK | GCR1_REIDL_EX_SEL_MASK | + GCR1_REIDL_ET_MAS_MASK); + srds.iowrite32(val, ®_base->rxgcr1); + udelay(1); + + /* set tecr0 for 1GKX */ + val = srds.ioread32(®_base->tecr0); + val &= ~TECR0_AMP_RED_MASK; + srds.iowrite32(val, ®_base->tecr0); + udelay(1); +} + +static int get_median_gaink2(u32 *reg) +{ + int gaink2_snap_shot[BIN_SNAPSHOT_NUM]; + u32 rx_eq_snp; + struct per_lane_ctrl_status *reg_base; + int timeout; + int i, j, tmp, pos; + + reg_base = (struct per_lane_ctrl_status *)reg; + + for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { + /* wait RECR3_SNP_DONE_MASK has cleared */ + timeout = 100; + while (srds.ioread32(®_base->recr3) & + RECR3_SNP_DONE_MASK) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* start snap shot */ + srds.iowrite32((srds.ioread32(®_base->recr3) | + RECR3_SNP_START_MASK), + ®_base->recr3); + + /* wait for SNP done */ + timeout = 100; + while (!(srds.ioread32(®_base->recr3) & + RECR3_SNP_DONE_MASK)) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* read and save the snap shot */ + rx_eq_snp = srds.ioread32(®_base->recr3); + gaink2_snap_shot[i] = (rx_eq_snp & RECR3_GAINK2_MASK) >> + RECR3_GAINK2_SHIFT; + + /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ + srds.iowrite32((srds.ioread32(®_base->recr3) & + ~RECR3_SNP_START_MASK), + ®_base->recr3); + } + + /* get median of the 5 snap shot */ + for (i = 0; i < BIN_SNAPSHOT_NUM - 1; i++) { + tmp = gaink2_snap_shot[i]; + pos = i; + for (j = i + 1; j < BIN_SNAPSHOT_NUM; j++) { + if (gaink2_snap_shot[j] < tmp) { + tmp = gaink2_snap_shot[j]; + pos = j; + } + } + + gaink2_snap_shot[pos] = gaink2_snap_shot[i]; + gaink2_snap_shot[i] = tmp; + } + + return gaink2_snap_shot[2]; +} + +static bool is_bin_early(int bin_sel, void *reg) +{ + bool early = false; + int bin_snap_shot[BIN_SNAPSHOT_NUM]; + int i, negative_count = 0; + struct per_lane_ctrl_status *reg_base = reg; + int timeout; + + for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { + /* wait RECR3_SNP_DONE_MASK has cleared */ + timeout = 100; + while ((srds.ioread32(®_base->recr3) & RECR3_SNP_DONE_MASK)) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* set TCSR1[CDR_SEL] to BinM1/BinLong */ + if (bin_sel == BIN_M1) { + srds.iowrite32((srds.ioread32(®_base->recr4) & + ~CDR_SEL_MASK) | BIN_M1_SEL, + ®_base->recr4); + } else { + srds.iowrite32((srds.ioread32(®_base->recr4) & + ~CDR_SEL_MASK) | BIN_Long_SEL, + ®_base->recr4); + } + + /* start snap shot */ + srds.iowrite32(srds.ioread32(®_base->recr3) | RECR3_SNP_START_MASK, + ®_base->recr3); + + /* wait for SNP done */ + timeout = 100; + while (!(srds.ioread32(®_base->recr3) & RECR3_SNP_DONE_MASK)) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* read and save the snap shot */ + bin_snap_shot[i] = (srds.ioread32(®_base->recr4) & + RECR4_SNP_DATA_MASK) >> RECR4_SNP_DATA_SHIFT; + if (bin_snap_shot[i] & RECR4_EQ_SNPBIN_SIGN_MASK) + negative_count++; + + /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ + srds.iowrite32(srds.ioread32(®_base->recr3) & ~RECR3_SNP_START_MASK, + ®_base->recr3); + } + + if (((bin_sel == BIN_M1) && (negative_count > BIN_M1_THRESHOLD)) || + ((bin_sel == BIN_LONG && (negative_count > BIN_LONG_THRESHOLD)))) { + early = true; + } + + return early; +} + +struct serdes_access* setup_serdes_access_28g(void) +{ + srds.get_lane_memmap_size = get_lane_memmap_size; + srds.tune_tecr = tune_tecr; + srds.reset_lane = reset_lane; + srds.lane_set_1gkx = lane_set_1gkx; + srds.get_median_gaink2 = get_median_gaink2; + srds.is_bin_early = is_bin_early; + + return &srds; +} --- /dev/null +++ b/drivers/net/phy/inphi.c @@ -0,0 +1,594 @@ +/* + * Copyright 2018 NXP + * Copyright 2018 INPHI + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * Inphi is a registered trademark of Inphi Corporation + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PHY_ID_IN112525 0x02107440 + +#define INPHI_S03_DEVICE_ID_MSB 0x2 +#define INPHI_S03_DEVICE_ID_LSB 0x3 + +#define ALL_LANES 4 +#define INPHI_POLL_DELAY 2500 + +#define PHYCTRL_REG1 0x0012 +#define PHYCTRL_REG2 0x0014 +#define PHYCTRL_REG3 0x0120 +#define PHYCTRL_REG4 0x0121 +#define PHYCTRL_REG5 0x0180 +#define PHYCTRL_REG6 0x0580 +#define PHYCTRL_REG7 0x05C4 +#define PHYCTRL_REG8 0x01C8 +#define PHYCTRL_REG9 0x0521 + +#define PHYSTAT_REG1 0x0021 +#define PHYSTAT_REG2 0x0022 +#define PHYSTAT_REG3 0x0123 + +#define PHYMISC_REG1 0x0025 +#define PHYMISC_REG2 0x002c +#define PHYMISC_REG3 0x00b3 +#define PHYMISC_REG4 0x0181 +#define PHYMISC_REG5 0x019D +#define PHYMISC_REG6 0x0198 +#define PHYMISC_REG7 0x0199 +#define PHYMISC_REG8 0x0581 +#define PHYMISC_REG9 0x0598 +#define PHYMISC_REG10 0x059c +#define PHYMISC_REG20 0x01B0 +#define PHYMISC_REG21 0x01BC +#define PHYMISC_REG22 0x01C0 + +#define RX_VCO_CODE_OFFSET 5 +#define VCO_CODE 390 + +int vco_codes[ALL_LANES] = { + VCO_CODE, + VCO_CODE, + VCO_CODE, + VCO_CODE +}; + +static void mykmod_work_handler(struct work_struct *w); + +static struct workqueue_struct *wq; +static DECLARE_DELAYED_WORK(mykmod_work, mykmod_work_handler); +static unsigned long onesec; +struct phy_device *inphi_phydev; + +static int mdio_wr(u32 regnum, u16 val) +{ + regnum = MII_ADDR_C45 | (MDIO_MMD_VEND1 << 16) | (regnum & 0xffff); + + return mdiobus_write(inphi_phydev->mdio.bus, inphi_phydev->mdio.addr, + regnum, val); +} + +static int mdio_rd(u32 regnum) +{ + regnum = MII_ADDR_C45 | (MDIO_MMD_VEND1 << 16) | (regnum & 0xffff); + + return mdiobus_read(inphi_phydev->mdio.bus, inphi_phydev->mdio.addr, + regnum); +} + + +int bit_test(int value, int bit_field) +{ + int result; + int bit_mask = (1 << bit_field); + + result = ((value & bit_mask) == bit_mask); + return result; +} + +int tx_pll_lock_test(int lane) +{ + int i, val, locked = 1; + + if (lane == ALL_LANES) { + for (i = 0; i < ALL_LANES; i++) { + val = mdio_rd(i * 0x100 + PHYSTAT_REG3); + locked = locked & bit_test(val, 15); + } + } else { + val = mdio_rd(lane * 0x100 + PHYSTAT_REG3); + locked = locked & bit_test(val, 15); + } + + return locked; +} + +void rx_reset_assert(int lane) +{ + int mask, val; + + if (lane == ALL_LANES) { + val = mdio_rd(PHYMISC_REG2); + mask = (1 << 15); + mdio_wr(PHYMISC_REG2, val + mask); + } else { + val = mdio_rd(lane * 0x100 + PHYCTRL_REG8); + mask = (1 << 6); + mdio_wr(lane * 0x100 + PHYCTRL_REG8, val + mask); + } +} + +void rx_reset_de_assert(int lane) +{ + int mask, val; + + if (lane == ALL_LANES) { + val = mdio_rd(PHYMISC_REG2); + mask = 0xffff - (1 << 15); + mdio_wr(PHYMISC_REG2, val & mask); + } else { + val = mdio_rd(lane * 0x100 + PHYCTRL_REG8); + mask = 0xffff - (1 << 6); + mdio_wr(lane * 0x100 + PHYCTRL_REG8, val & mask); + } +} + +void rx_powerdown_assert(int lane) +{ + int mask, val; + + val = mdio_rd(lane * 0x100 + PHYCTRL_REG8); + mask = (1 << 5); + mdio_wr(lane * 0x100 + PHYCTRL_REG8, val + mask); +} + +void rx_powerdown_de_assert(int lane) +{ + int mask, val; + + val = mdio_rd(lane * 0x100 + PHYCTRL_REG8); + mask = 0xffff - (1 << 5); + mdio_wr(lane * 0x100 + PHYCTRL_REG8, val & mask); +} + +void tx_pll_assert(int lane) +{ + int val, recal; + + if (lane == ALL_LANES) { + val = mdio_rd(PHYMISC_REG2); + recal = (1 << 12); + mdio_wr(PHYMISC_REG2, val | recal); + } else { + val = mdio_rd(lane * 0x100 + PHYCTRL_REG4); + recal = (1 << 15); + mdio_wr(lane * 0x100 + PHYCTRL_REG4, val | recal); + } +} + +void tx_pll_de_assert(int lane) +{ + int recal, val; + + if (lane == ALL_LANES) { + val = mdio_rd(PHYMISC_REG2); + recal = 0xefff; + mdio_wr(PHYMISC_REG2, val & recal); + } else { + val = mdio_rd(lane * 0x100 + PHYCTRL_REG4); + recal = 0x7fff; + mdio_wr(lane * 0x100 + PHYCTRL_REG4, val & recal); + } +} + +void tx_core_assert(int lane) +{ + int recal, val, val2, core_reset; + + if (lane == 4) { + val = mdio_rd(PHYMISC_REG2); + recal = 1 << 10; + mdio_wr(PHYMISC_REG2, val | recal); + } else { + val2 = mdio_rd(PHYMISC_REG3); + core_reset = (1 << (lane + 8)); + mdio_wr(PHYMISC_REG3, val2 | core_reset); + } +} + +void lol_disable(int lane) +{ + int val, mask; + + val = mdio_rd(PHYMISC_REG3); + mask = 1 << (lane + 4); + mdio_wr(PHYMISC_REG3, val | mask); +} + +void tx_core_de_assert(int lane) +{ + int val, recal, val2, core_reset; + + if (lane == ALL_LANES) { + val = mdio_rd(PHYMISC_REG2); + recal = 0xffff - (1 << 10); + mdio_wr(PHYMISC_REG2, val & recal); + } else { + val2 = mdio_rd(PHYMISC_REG3); + core_reset = 0xffff - (1 << (lane + 8)); + mdio_wr(PHYMISC_REG3, val2 & core_reset); + } +} + +void tx_restart(int lane) +{ + tx_core_assert(lane); + tx_pll_assert(lane); + tx_pll_de_assert(lane); + usleep_range(1500, 1600); + tx_core_de_assert(lane); +} + +void disable_lane(int lane) +{ + rx_reset_assert(lane); + rx_powerdown_assert(lane); + tx_core_assert(lane); + lol_disable(lane); +} + +void toggle_reset(int lane) +{ + int reg, val, orig; + + if (lane == ALL_LANES) { + mdio_wr(PHYMISC_REG2, 0x8000); + udelay(100); + mdio_wr(PHYMISC_REG2, 0x0000); + } else { + reg = lane * 0x100 + PHYCTRL_REG8; + val = (1 << 6); + orig = mdio_rd(reg); + mdio_wr(reg, orig + val); + udelay(100); + mdio_wr(reg, orig); + } +} + +int az_complete_test(int lane) +{ + int success = 1, value; + + if (lane == 0 || lane == ALL_LANES) { + value = mdio_rd(PHYCTRL_REG5); + success = success & bit_test(value, 2); + } + if (lane == 1 || lane == ALL_LANES) { + value = mdio_rd(PHYCTRL_REG5 + 0x100); + success = success & bit_test(value, 2); + } + if (lane == 2 || lane == ALL_LANES) { + value = mdio_rd(PHYCTRL_REG5 + 0x200); + success = success & bit_test(value, 2); + } + if (lane == 3 || lane == ALL_LANES) { + value = mdio_rd(PHYCTRL_REG5 + 0x300); + success = success & bit_test(value, 2); + } + + return success; +} + +void save_az_offsets(int lane) +{ + int i; + +#define AZ_OFFSET_LANE_UPDATE(reg, lane) \ + mdio_wr((reg) + (lane) * 0x100, \ + (mdio_rd((reg) + (lane) * 0x100) >> 8)) + + if (lane == ALL_LANES) { + for (i = 0; i < ALL_LANES; i++) { + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20, i); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 1, i); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 2, i); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 3, i); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21, i); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 1, i); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 2, i); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 3, i); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG22, i); + } + } else { + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20, lane); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 1, lane); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 2, lane); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG20 + 3, lane); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21, lane); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 1, lane); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 2, lane); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG21 + 3, lane); + AZ_OFFSET_LANE_UPDATE(PHYMISC_REG22, lane); + } + + mdio_wr(PHYCTRL_REG7, 0x0001); +} + +void save_vco_codes(int lane) +{ + int i; + + if (lane == ALL_LANES) { + for (i = 0; i < ALL_LANES; i++) { + vco_codes[i] = mdio_rd(PHYMISC_REG5 + i * 0x100); + mdio_wr(PHYMISC_REG5 + i * 0x100, + vco_codes[i] + RX_VCO_CODE_OFFSET); + } + } else { + vco_codes[lane] = mdio_rd(PHYMISC_REG5 + lane * 0x100); + mdio_wr(PHYMISC_REG5 + lane * 0x100, + vco_codes[lane] + RX_VCO_CODE_OFFSET); + } +} + +int inphi_lane_recovery(int lane) +{ + int i, value, az_pass; + + switch (lane) { + case 0: + case 1: + case 2: + case 3: + rx_reset_assert(lane); + mdelay(20); + break; + case ALL_LANES: + mdio_wr(PHYMISC_REG2, 0x9C00); + mdelay(20); + do { + value = mdio_rd(PHYMISC_REG2); + udelay(10); + } while (!bit_test(value, 4)); + break; + default: + dev_err(&inphi_phydev->mdio.dev, + "Incorrect usage of APIs in %s driver\n", + inphi_phydev->drv->name); + break; + } + + if (lane == ALL_LANES) { + for (i = 0; i < ALL_LANES; i++) + mdio_wr(PHYMISC_REG7 + i * 0x100, VCO_CODE); + } else { + mdio_wr(PHYMISC_REG7 + lane * 0x100, VCO_CODE); + } + + if (lane == ALL_LANES) + for (i = 0; i < ALL_LANES; i++) + mdio_wr(PHYCTRL_REG5 + i * 0x100, 0x0418); + else + mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0418); + + mdio_wr(PHYCTRL_REG7, 0x0000); + + rx_reset_de_assert(lane); + + if (lane == ALL_LANES) { + for (i = 0; i < ALL_LANES; i++) { + mdio_wr(PHYCTRL_REG5 + i * 0x100, 0x0410); + mdio_wr(PHYCTRL_REG5 + i * 0x100, 0x0412); + } + } else { + mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0410); + mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0412); + } + + for (i = 0; i < 64; i++) { + mdelay(100); + az_pass = az_complete_test(lane); + if (az_pass) { + save_az_offsets(lane); + break; + } + } + + if (!az_pass) { + pr_info("in112525: AZ calibration fail @ lane=%d\n", lane); + return -1; + } + + if (lane == ALL_LANES) { + mdio_wr(PHYMISC_REG8, 0x0002); + mdio_wr(PHYMISC_REG9, 0x2028); + mdio_wr(PHYCTRL_REG6, 0x0010); + usleep_range(1000, 1200); + mdio_wr(PHYCTRL_REG6, 0x0110); + mdelay(30); + mdio_wr(PHYMISC_REG9, 0x3020); + } else { + mdio_wr(PHYMISC_REG4 + lane * 0x100, 0x0002); + mdio_wr(PHYMISC_REG6 + lane * 0x100, 0x2028); + mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0010); + usleep_range(1000, 1200); + mdio_wr(PHYCTRL_REG5 + lane * 0x100, 0x0110); + mdelay(30); + mdio_wr(PHYMISC_REG6 + lane * 0x100, 0x3020); + } + + if (lane == ALL_LANES) { + mdio_wr(PHYMISC_REG2, 0x1C00); + mdio_wr(PHYMISC_REG2, 0x0C00); + } else { + tx_restart(lane); + mdelay(11); + } + + if (lane == ALL_LANES) { + if (bit_test(mdio_rd(PHYMISC_REG2), 6) == 0) + return -1; + } else { + if (tx_pll_lock_test(lane) == 0) + return -1; + } + + save_vco_codes(lane); + + if (lane == ALL_LANES) { + mdio_wr(PHYMISC_REG2, 0x0400); + mdio_wr(PHYMISC_REG2, 0x0000); + value = mdio_rd(PHYCTRL_REG1); + value = value & 0xffbf; + mdio_wr(PHYCTRL_REG2, value); + } else { + tx_core_de_assert(lane); + } + + if (lane == ALL_LANES) { + mdio_wr(PHYMISC_REG1, 0x8000); + mdio_wr(PHYMISC_REG1, 0x0000); + } + mdio_rd(PHYMISC_REG1); + mdio_rd(PHYMISC_REG1); + usleep_range(1000, 1200); + mdio_rd(PHYSTAT_REG1); + mdio_rd(PHYSTAT_REG2); + + return 0; +} + +static void mykmod_work_handler(struct work_struct *w) +{ + int all_lanes_lock, lane0_lock, lane1_lock, lane2_lock, lane3_lock; + + lane0_lock = bit_test(mdio_rd(0x123), 15); + lane1_lock = bit_test(mdio_rd(0x223), 15); + lane2_lock = bit_test(mdio_rd(0x323), 15); + lane3_lock = bit_test(mdio_rd(0x423), 15); + + /* check if the chip had any successful lane lock from the previous + * stage (e.g. u-boot) + */ + all_lanes_lock = lane0_lock | lane1_lock | lane2_lock | lane3_lock; + + if (!all_lanes_lock) { + /* start fresh */ + inphi_lane_recovery(ALL_LANES); + } else { + if (!lane0_lock) + inphi_lane_recovery(0); + if (!lane1_lock) + inphi_lane_recovery(1); + if (!lane2_lock) + inphi_lane_recovery(2); + if (!lane3_lock) + inphi_lane_recovery(3); + } + + queue_delayed_work(wq, &mykmod_work, onesec); +} + +int inphi_probe(struct phy_device *phydev) +{ + int phy_id = 0, id_lsb = 0, id_msb = 0; + + /* setup the inphi_phydev ptr for mdio_rd/mdio_wr APIs */ + inphi_phydev = phydev; + + /* Read device id from phy registers */ + id_lsb = mdio_rd(INPHI_S03_DEVICE_ID_MSB); + if (id_lsb < 0) + return -ENXIO; + + phy_id = id_lsb << 16; + + id_msb = mdio_rd(INPHI_S03_DEVICE_ID_LSB); + if (id_msb < 0) + return -ENXIO; + + phy_id |= id_msb; + + /* Make sure the device tree binding matched the driver with the + * right device. + */ + if (phy_id != phydev->drv->phy_id) { + dev_err(&phydev->mdio.dev, + "Error matching phy with %s driver\n", + phydev->drv->name); + return -ENODEV; + } + + /* update the local phydev pointer, used inside all APIs */ + inphi_phydev = phydev; + onesec = msecs_to_jiffies(INPHI_POLL_DELAY); + + wq = create_singlethread_workqueue("inphi_kmod"); + if (wq) { + queue_delayed_work(wq, &mykmod_work, onesec); + } else { + dev_err(&phydev->mdio.dev, + "Error creating kernel workqueue for %s driver\n", + phydev->drv->name); + return -ENOMEM; + } + + return 0; +} + +static struct phy_driver inphi_driver[] = { +{ + .phy_id = PHY_ID_IN112525, + .phy_id_mask = 0x0ff0fff0, + .name = "Inphi 112525_S03", + .features = PHY_GBIT_FEATURES, + .probe = &inphi_probe, +}, +}; + +module_phy_driver(inphi_driver); + +static struct mdio_device_id __maybe_unused inphi_tbl[] = { + { PHY_ID_IN112525, 0x0ff0fff0}, + {}, +}; + +MODULE_DEVICE_TABLE(mdio, inphi_tbl); --- /dev/null +++ b/drivers/net/phy/mdio-mux-multiplexer.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* MDIO bus multiplexer using kernel multiplexer subsystem + * + * Copyright 2019 NXP + */ + +#include +#include +#include +#include + +struct mdio_mux_multiplexer_state { + struct mux_control *muxc; + bool do_deselect; + void *mux_handle; +}; + +/** + * mdio_mux_multiplexer_switch_fn - This function is called by the mdio-mux + * layer when it thinks the mdio bus + * multiplexer needs to switch. + * @current_child: current value of the mux register. + * @desired_child: value of the 'reg' property of the target child MDIO node. + * @data: Private data used by this switch_fn passed to mdio_mux_init function + * via mdio_mux_init(.., .., .., .., data, ..). + * + * The first time this function is called, current_child == -1. + * If current_child == desired_child, then the mux is already set to the + * correct bus. + */ +static int mdio_mux_multiplexer_switch_fn(int current_child, int desired_child, + void *data) +{ + struct platform_device *pdev; + struct mdio_mux_multiplexer_state *s; + int ret = 0; + + pdev = (struct platform_device *)data; + s = platform_get_drvdata(pdev); + + if (!(current_child ^ desired_child)) + return 0; + + if (s->do_deselect) + ret = mux_control_deselect(s->muxc); + if (ret) { + dev_err(&pdev->dev, "mux_control_deselect failed in %s: %d\n", + __func__, ret); + return ret; + } + + ret = mux_control_select(s->muxc, desired_child); + if (!ret) { + dev_dbg(&pdev->dev, "%s %d -> %d\n", __func__, current_child, + desired_child); + s->do_deselect = true; + } else { + s->do_deselect = false; + } + + return ret; +} + +static int mdio_mux_multiplexer_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mdio_mux_multiplexer_state *s; + int ret = 0; + + s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); + if (!s) + return -ENOMEM; + + s->muxc = devm_mux_control_get(dev, NULL); + if (IS_ERR(s->muxc)) { + ret = PTR_ERR(s->muxc); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get mux: %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, s); + + ret = mdio_mux_init(&pdev->dev, pdev->dev.of_node, + mdio_mux_multiplexer_switch_fn, &s->mux_handle, + pdev, NULL); + + return ret; +} + +static int mdio_mux_multiplexer_remove(struct platform_device *pdev) +{ + struct mdio_mux_multiplexer_state *s = platform_get_drvdata(pdev); + + mdio_mux_uninit(s->mux_handle); + + if (s->do_deselect) + mux_control_deselect(s->muxc); + + return 0; +} + +static const struct of_device_id mdio_mux_multiplexer_match[] = { + { .compatible = "mdio-mux-multiplexer", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mdio_mux_multiplexer_match); + +static struct platform_driver mdio_mux_multiplexer_driver = { + .driver = { + .name = "mdio-mux-multiplexer", + .of_match_table = mdio_mux_multiplexer_match, + }, + .probe = mdio_mux_multiplexer_probe, + .remove = mdio_mux_multiplexer_remove, +}; + +module_platform_driver(mdio_mux_multiplexer_driver); + +MODULE_DESCRIPTION("MDIO bus multiplexer using kernel multiplexer subsystem"); +MODULE_AUTHOR("Pankaj Bansal "); +MODULE_LICENSE("GPL"); --- a/drivers/net/phy/swphy.c +++ b/drivers/net/phy/swphy.c @@ -77,6 +77,7 @@ static const struct swmii_regs duplex[] static int swphy_decode_speed(int speed) { switch (speed) { + case 10000: case 1000: return SWMII_SPEED_1000; case 100: --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -87,6 +87,7 @@ typedef enum { PHY_INTERFACE_MODE_XAUI, /* 10GBASE-KR, XFI, SFI - single lane 10G Serdes */ PHY_INTERFACE_MODE_10GKR, + PHY_INTERFACE_MODE_2500SGMII, PHY_INTERFACE_MODE_MAX, } phy_interface_t; @@ -159,6 +160,8 @@ static inline const char *phy_modes(phy_ return "xaui"; case PHY_INTERFACE_MODE_10GKR: return "10gbase-kr"; + case PHY_INTERFACE_MODE_2500SGMII: + return "sgmii-2500"; default: return "unknown"; }