/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com * * This program is free software; you can redistribute it and/or * modify it under the terms of version 2 of the GNU General Public * License as published by the Free Software Foundation. */ #ifndef __LINUX_BPF_H__ #define __LINUX_BPF_H__ #include #include /* Extended instruction set based on top of classic BPF */ /* instruction classes */ #define BPF_ALU64 0x07 /* alu mode in double word width */ /* ld/ldx fields */ #define BPF_DW 0x18 /* double word */ #define BPF_XADD 0xc0 /* exclusive add */ /* alu/jmp fields */ #define BPF_MOV 0xb0 /* mov reg to reg */ #define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */ /* change endianness of a register */ #define BPF_END 0xd0 /* flags for endianness conversion: */ #define BPF_TO_LE 0x00 /* convert to little-endian */ #define BPF_TO_BE 0x08 /* convert to big-endian */ #define BPF_FROM_LE BPF_TO_LE #define BPF_FROM_BE BPF_TO_BE /* jmp encodings */ #define BPF_JNE 0x50 /* jump != */ #define BPF_JLT 0xa0 /* LT is unsigned, '<' */ #define BPF_JLE 0xb0 /* LE is unsigned, '<=' */ #define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */ #define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */ #define BPF_JSLT 0xc0 /* SLT is signed, '<' */ #define BPF_JSLE 0xd0 /* SLE is signed, '<=' */ #define BPF_CALL 0x80 /* function call */ #define BPF_EXIT 0x90 /* function return */ /* Register numbers */ enum { BPF_REG_0 = 0, BPF_REG_1, BPF_REG_2, BPF_REG_3, BPF_REG_4, BPF_REG_5, BPF_REG_6, BPF_REG_7, BPF_REG_8, BPF_REG_9, BPF_REG_10, __MAX_BPF_REG, }; /* BPF has 10 general purpose 64-bit registers and stack frame. */ #define MAX_BPF_REG __MAX_BPF_REG struct bpf_insn { __u8 code; /* opcode */ __u8 dst_reg:4; /* dest register */ __u8 src_reg:4; /* source register */ __s16 off; /* signed offset */ __s32 imm; /* signed immediate constant */ }; /* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */ struct bpf_lpm_trie_key { __u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */ __u8 data[0]; /* Arbitrary size */ }; /* BPF syscall commands, see bpf(2) man-page for details. */ enum bpf_cmd { BPF_MAP_CREATE, BPF_MAP_LOOKUP_ELEM, BPF_MAP_UPDATE_ELEM, BPF_MAP_DELETE_ELEM, BPF_MAP_GET_NEXT_KEY, BPF_PROG_LOAD, BPF_OBJ_PIN, BPF_OBJ_GET, BPF_PROG_ATTACH, BPF_PROG_DETACH, BPF_PROG_TEST_RUN, BPF_PROG_GET_NEXT_ID, BPF_MAP_GET_NEXT_ID, BPF_PROG_GET_FD_BY_ID, BPF_MAP_GET_FD_BY_ID, BPF_OBJ_GET_INFO_BY_FD, }; enum bpf_map_type { BPF_MAP_TYPE_UNSPEC, BPF_MAP_TYPE_HASH, BPF_MAP_TYPE_ARRAY, BPF_MAP_TYPE_PROG_ARRAY, BPF_MAP_TYPE_PERF_EVENT_ARRAY, BPF_MAP_TYPE_PERCPU_HASH, BPF_MAP_TYPE_PERCPU_ARRAY, BPF_MAP_TYPE_STACK_TRACE, BPF_MAP_TYPE_CGROUP_ARRAY, BPF_MAP_TYPE_LRU_HASH, BPF_MAP_TYPE_LRU_PERCPU_HASH, BPF_MAP_TYPE_LPM_TRIE, BPF_MAP_TYPE_ARRAY_OF_MAPS, BPF_MAP_TYPE_HASH_OF_MAPS, BPF_MAP_TYPE_DEVMAP, BPF_MAP_TYPE_SOCKMAP, }; enum bpf_prog_type { BPF_PROG_TYPE_UNSPEC, BPF_PROG_TYPE_SOCKET_FILTER, BPF_PROG_TYPE_KPROBE, BPF_PROG_TYPE_SCHED_CLS, BPF_PROG_TYPE_SCHED_ACT, BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_XDP, BPF_PROG_TYPE_PERF_EVENT, BPF_PROG_TYPE_CGROUP_SKB, BPF_PROG_TYPE_CGROUP_SOCK, BPF_PROG_TYPE_LWT_IN, BPF_PROG_TYPE_LWT_OUT, BPF_PROG_TYPE_LWT_XMIT, BPF_PROG_TYPE_SOCK_OPS, BPF_PROG_TYPE_SK_SKB, }; enum bpf_attach_type { BPF_CGROUP_INET_INGRESS, BPF_CGROUP_INET_EGRESS, BPF_CGROUP_INET_SOCK_CREATE, BPF_CGROUP_SOCK_OPS, BPF_SK_SKB_STREAM_PARSER, BPF_SK_SKB_STREAM_VERDICT, __MAX_BPF_ATTACH_TYPE }; #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE /* If BPF_F_ALLOW_OVERRIDE flag is used in BPF_PROG_ATTACH command * to the given target_fd cgroup the descendent cgroup will be able to * override effective bpf program that was inherited from this cgroup */ #define BPF_F_ALLOW_OVERRIDE (1U << 0) /* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the * verifier will perform strict alignment checking as if the kernel * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set, * and NET_IP_ALIGN defined to 2. */ #define BPF_F_STRICT_ALIGNMENT (1U << 0) #define BPF_PSEUDO_MAP_FD 1 /* flags for BPF_MAP_UPDATE_ELEM command */ #define BPF_ANY 0 /* create new element or update existing */ #define BPF_NOEXIST 1 /* create new element if it didn't exist */ #define BPF_EXIST 2 /* update existing element */ /* flags for BPF_MAP_CREATE command */ #define BPF_F_NO_PREALLOC (1U << 0) /* Instead of having one common LRU list in the * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list * which can scale and perform better. * Note, the LRU nodes (including free nodes) cannot be moved * across different LRU lists. */ #define BPF_F_NO_COMMON_LRU (1U << 1) /* Specify numa node during map creation */ #define BPF_F_NUMA_NODE (1U << 2) union bpf_attr { struct { /* anonymous struct used by BPF_MAP_CREATE command */ __u32 map_type; /* one of enum bpf_map_type */ __u32 key_size; /* size of key in bytes */ __u32 value_size; /* size of value in bytes */ __u32 max_entries; /* max number of entries in a map */ __u32 map_flags; /* BPF_MAP_CREATE related * flags defined above. */ __u32 inner_map_fd; /* fd pointing to the inner map */ __u32 numa_node; /* numa node (effective only if * BPF_F_NUMA_NODE is set). */ }; struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ __u32 map_fd; __aligned_u64 key; union { __aligned_u64 value; __aligned_u64 next_key; }; __u64 flags; }; struct { /* anonymous struct used by BPF_PROG_LOAD command */ __u32 prog_type; /* one of enum bpf_prog_type */ __u32 insn_cnt; __aligned_u64 insns; __aligned_u64 license; __u32 log_level; /* verbosity level of verifier */ __u32 log_size; /* size of user buffer */ __aligned_u64 log_buf; /* user supplied buffer */ __u32 kern_version; /* checked when prog_type=kprobe */ __u32 prog_flags; }; struct { /* anonymous struct used by BPF_OBJ_* commands */ __aligned_u64 pathname; __u32 bpf_fd; }; struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */ __u32 target_fd; /* container object to attach to */ __u32 attach_bpf_fd; /* eBPF program to attach */ __u32 attach_type; __u32 attach_flags; }; struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */ __u32 prog_fd; __u32 retval; __u32 data_size_in; __u32 data_size_out; __aligned_u64 data_in; __aligned_u64 data_out; __u32 repeat; __u32 duration; } test; struct { /* anonymous struct used by BPF_*_GET_*_ID */ union { __u32 start_id; __u32 prog_id; __u32 map_id; }; __u32 next_id; }; struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */ __u32 bpf_fd; __u32 info_len; __aligned_u64 info; } info; } __attribute__((aligned(8))); /* BPF helper function descriptions: * * void *bpf_map_lookup_elem(&map, &key) * Return: Map value or NULL * * int bpf_map_update_elem(&map, &key, &value, flags) * Return: 0 on success or negative error * * int bpf_map_delete_elem(&map, &key) * Return: 0 on success or negative error * * int bpf_probe_read(void *dst, int size, void *src) * Return: 0 on success or negative error * * u64 bpf_ktime_get_ns(void) * Return: current ktime * * int bpf_trace_printk(const char *fmt, int fmt_size, ...) * Return: length of buffer written or negative error * * u32 bpf_prandom_u32(void) * Return: random value * * u32 bpf_raw_smp_processor_id(void) * Return: SMP processor ID * * int bpf_skb_store_bytes(skb, offset, from, len, flags) * store bytes into packet * @skb: pointer to skb * @offset: offset within packet from skb->mac_header * @from: pointer where to copy bytes from * @len: number of bytes to store into packet * @flags: bit 0 - if true, recompute skb->csum * other bits - reserved * Return: 0 on success or negative error * * int bpf_l3_csum_replace(skb, offset, from, to, flags) * recompute IP checksum * @skb: pointer to skb * @offset: offset within packet where IP checksum is located * @from: old value of header field * @to: new value of header field * @flags: bits 0-3 - size of header field * other bits - reserved * Return: 0 on success or negative error * * int bpf_l4_csum_replace(skb, offset, from, to, flags) * recompute TCP/UDP checksum * @skb: pointer to skb * @offset: offset within packet where TCP/UDP checksum is located * @from: old value of header field * @to: new value of header field * @flags: bits 0-3 - size of header field * bit 4 - is pseudo header * other bits - reserved * Return: 0 on success or negative error * * int bpf_tail_call(ctx, prog_array_map, index) * jump into another BPF program * @ctx: context pointer passed to next program * @prog_array_map: pointer to map which type is BPF_MAP_TYPE_PROG_ARRAY * @index: 32-bit index inside array that selects specific program to run * Return: 0 on success or negative error * * int bpf_clone_redirect(skb, ifindex, flags) * redirect to another netdev * @skb: pointer to skb * @ifindex: ifindex of the net device * @flags: bit 0 - if set, redirect to ingress instead of egress * other bits - reserved * Return: 0 on success or negative error * * u64 bpf_get_current_pid_tgid(void) * Return: current->tgid << 32 | current->pid * * u64 bpf_get_current_uid_gid(void) * Return: current_gid << 32 | current_uid * * int bpf_get_current_comm(char *buf, int size_of_buf) * stores current->comm into buf * Return: 0 on success or negative error * * u32 bpf_get_cgroup_classid(skb) * retrieve a proc's classid * @skb: pointer to skb * Return: classid if != 0 * * int bpf_skb_vlan_push(skb, vlan_proto, vlan_tci) * Return: 0 on success or negative error * * int bpf_skb_vlan_pop(skb) * Return: 0 on success or negative error * * int bpf_skb_get_tunnel_key(skb, key, size, flags) * int bpf_skb_set_tunnel_key(skb, key, size, flags) * retrieve or populate tunnel metadata * @skb: pointer to skb * @key: pointer to 'struct bpf_tunnel_key' * @size: size of 'struct bpf_tunnel_key' * @flags: room for future extensions * Return: 0 on success or negative error * * u64 bpf_perf_event_read(map, flags) * read perf event counter value * @map: pointer to perf_event_array map * @flags: index of event in the map or bitmask flags * Return: value of perf event counter read or error code * * int bpf_redirect(ifindex, flags) * redirect to another netdev * @ifindex: ifindex of the net device * @flags: * cls_bpf: * bit 0 - if set, redirect to ingress instead of egress * other bits - reserved * xdp_bpf: * all bits - reserved * Return: cls_bpf: TC_ACT_REDIRECT on success or TC_ACT_SHOT on error * xdp_bfp: XDP_REDIRECT on success or XDP_ABORT on error * int bpf_redirect_map(map, key, flags) * redirect to endpoint in map * @map: pointer to dev map * @key: index in map to lookup * @flags: -- * Return: XDP_REDIRECT on success or XDP_ABORT on error * * u32 bpf_get_route_realm(skb) * retrieve a dst's tclassid * @skb: pointer to skb * Return: realm if != 0 * * int bpf_perf_event_output(ctx, map, flags, data, size) * output perf raw sample * @ctx: struct pt_regs* * @map: pointer to perf_event_array map * @flags: index of event in the map or bitmask flags * @data: data on stack to be output as raw data * @size: size of data * Return: 0 on success or negative error * * int bpf_get_stackid(ctx, map, flags) * walk user or kernel stack and return id * @ctx: struct pt_regs* * @map: pointer to stack_trace map * @flags: bits 0-7 - numer of stack frames to skip * bit 8 - collect user stack instead of kernel * bit 9 - compare stacks by hash only * bit 10 - if two different stacks hash into the same stackid * discard old * other bits - reserved * Return: >= 0 stackid on success or negative error * * s64 bpf_csum_diff(from, from_size, to, to_size, seed) * calculate csum diff * @from: raw from buffer * @from_size: length of from buffer * @to: raw to buffer * @to_size: length of to buffer * @seed: optional seed * Return: csum result or negative error code * * int bpf_skb_get_tunnel_opt(skb, opt, size) * retrieve tunnel options metadata * @skb: pointer to skb * @opt: pointer to raw tunnel option data * @size: size of @opt * Return: option size * * int bpf_skb_set_tunnel_opt(skb, opt, size) * populate tunnel options metadata * @skb: pointer to skb * @opt: pointer to raw tunnel option data * @size: size of @opt * Return: 0 on success or negative error * * int bpf_skb_change_proto(skb, proto, flags) * Change protocol of the skb. Currently supported is v4 -> v6, * v6 -> v4 transitions. The helper will also resize the skb. eBPF * program is expected to fill the new headers via skb_store_bytes * and lX_csum_replace. * @skb: pointer to skb * @proto: new skb->protocol type * @flags: reserved * Return: 0 on success or negative error * * int bpf_skb_change_type(skb, type) * Change packet type of skb. * @skb: pointer to skb * @type: new skb->pkt_type type * Return: 0 on success or negative error * * int bpf_skb_under_cgroup(skb, map, index) * Check cgroup2 membership of skb * @skb: pointer to skb * @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type * @index: index of the cgroup in the bpf_map * Return: * == 0 skb failed the cgroup2 descendant test * == 1 skb succeeded the cgroup2 descendant test * < 0 error * * u32 bpf_get_hash_recalc(skb) * Retrieve and possibly recalculate skb->hash. * @skb: pointer to skb * Return: hash * * u64 bpf_get_current_task(void) * Returns current task_struct * Return: current * * int bpf_probe_write_user(void *dst, void *src, int len) * safely attempt to write to a location * @dst: destination address in userspace * @src: source address on stack * @len: number of bytes to copy * Return: 0 on success or negative error * * int bpf_current_task_under_cgroup(map, index) * Check cgroup2 membership of current task * @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type * @index: index of the cgroup in the bpf_map * Return: * == 0 current failed the cgroup2 descendant test * == 1 current succeeded the cgroup2 descendant test * < 0 error * * int bpf_skb_change_tail(skb, len, flags) * The helper will resize the skb to the given new size, to be used f.e. * with control messages. * @skb: pointer to skb * @len: new skb length * @flags: reserved * Return: 0 on success or negative error * * int bpf_skb_pull_data(skb, len) * The helper will pull in non-linear data in case the skb is non-linear * and not all of len are part of the linear section. Only needed for * read/write with direct packet access. * @skb: pointer to skb * @len: len to make read/writeable * Return: 0 on success or negative error * * s64 bpf_csum_update(skb, csum) * Adds csum into skb->csum in case of CHECKSUM_COMPLETE. * @skb: pointer to skb * @csum: csum to add * Return: csum on success or negative error * * void bpf_set_hash_invalid(skb) * Invalidate current skb->hash. * @skb: pointer to skb * * int bpf_get_numa_node_id() * Return: Id of current NUMA node. * * int bpf_skb_change_head() * Grows headroom of skb and adjusts MAC header offset accordingly. * Will extends/reallocae as required automatically. * May change skb data pointer and will thus invalidate any check * performed for direct packet access. * @skb: pointer to skb * @len: length of header to be pushed in front * @flags: Flags (unused for now) * Return: 0 on success or negative error * * int bpf_xdp_adjust_head(xdp_md, delta) * Adjust the xdp_md.data by delta * @xdp_md: pointer to xdp_md * @delta: An positive/negative integer to be added to xdp_md.data * Return: 0 on success or negative on error * * int bpf_probe_read_str(void *dst, int size, const void *unsafe_ptr) * Copy a NUL terminated string from unsafe address. In case the string * length is smaller than size, the target is not padded with further NUL * bytes. In case the string length is larger than size, just count-1 * bytes are copied and the last byte is set to NUL. * @dst: destination address * @size: maximum number of bytes to copy, including the trailing NUL * @unsafe_ptr: unsafe address * Return: * > 0 length of the string including the trailing NUL on success * < 0 error * * u64 bpf_get_socket_cookie(skb) * Get the cookie for the socket stored inside sk_buff. * @skb: pointer to skb * Return: 8 Bytes non-decreasing number on success or 0 if the socket * field is missing inside sk_buff * * u32 bpf_get_socket_uid(skb) * Get the owner uid of the socket stored inside sk_buff. * @skb: pointer to skb * Return: uid of the socket owner on success or overflowuid if failed. * * u32 bpf_set_hash(skb, hash) * Set full skb->hash. * @skb: pointer to skb * @hash: hash to set * * int bpf_setsockopt(bpf_socket, level, optname, optval, optlen) * Calls setsockopt. Not all opts are available, only those with * integer optvals plus TCP_CONGESTION. * Supported levels: SOL_SOCKET and IPROTO_TCP * @bpf_socket: pointer to bpf_socket * @level: SOL_SOCKET or IPROTO_TCP * @optname: option name * @optval: pointer to option value * @optlen: length of optval in byes * Return: 0 or negative error * * int bpf_skb_adjust_room(skb, len_diff, mode, flags) * Grow or shrink room in sk_buff. * @skb: pointer to skb * @len_diff: (signed) amount of room to grow/shrink * @mode: operation mode (enum bpf_adj_room_mode) * @flags: reserved for future use * Return: 0 on success or negative error code * * int bpf_sk_redirect_map(map, key, flags) * Redirect skb to a sock in map using key as a lookup key for the * sock in map. * @map: pointer to sockmap * @key: key to lookup sock in map * @flags: reserved for future use * Return: SK_PASS * * int bpf_sock_map_update(skops, map, key, flags) * @skops: pointer to bpf_sock_ops * @map: pointer to sockmap to update * @key: key to insert/update sock in map * @flags: same flags as map update elem */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ FN(map_lookup_elem), \ FN(map_update_elem), \ FN(map_delete_elem), \ FN(probe_read), \ FN(ktime_get_ns), \ FN(trace_printk), \ FN(get_prandom_u32), \ FN(get_smp_processor_id), \ FN(skb_store_bytes), \ FN(l3_csum_replace), \ FN(l4_csum_replace), \ FN(tail_call), \ FN(clone_redirect), \ FN(get_current_pid_tgid), \ FN(get_current_uid_gid), \ FN(get_current_comm), \ FN(get_cgroup_classid), \ FN(skb_vlan_push), \ FN(skb_vlan_pop), \ FN(skb_get_tunnel_key), \ FN(skb_set_tunnel_key), \ FN(perf_event_read), \ FN(redirect), \ FN(get_route_realm), \ FN(perf_event_output), \ FN(skb_load_bytes), \ FN(get_stackid), \ FN(csum_diff), \ FN(skb_get_tunnel_opt), \ FN(skb_set_tunnel_opt), \ FN(skb_change_proto), \ FN(skb_change_type), \ FN(skb_under_cgroup), \ FN(get_hash_recalc), \ FN(get_current_task), \ FN(probe_write_user), \ FN(current_task_under_cgroup), \ FN(skb_change_tail), \ FN(skb_pull_data), \ FN(csum_update), \ FN(set_hash_invalid), \ FN(get_numa_node_id), \ FN(skb_change_head), \ FN(xdp_adjust_head), \ FN(probe_read_str), \ FN(get_socket_cookie), \ FN(get_socket_uid), \ FN(set_hash), \ FN(setsockopt), \ FN(skb_adjust_room), \ FN(redirect_map), \ FN(sk_redirect_map), \ FN(sock_map_update), \ /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call */ #define __BPF_ENUM_FN(x) BPF_FUNC_ ## x enum bpf_func_id { __BPF_FUNC_MAPPER(__BPF_ENUM_FN) __BPF_FUNC_MAX_ID, }; #undef __BPF_ENUM_FN /* All flags used by eBPF helper functions, placed here. */ /* BPF_FUNC_skb_store_bytes flags. */ #define BPF_F_RECOMPUTE_CSUM (1ULL << 0) #define BPF_F_INVALIDATE_HASH (1ULL << 1) /* BPF_FUNC_l3_csum_replace and BPF_FUNC_l4_csum_replace flags. * First 4 bits are for passing the header field size. */ #define BPF_F_HDR_FIELD_MASK 0xfULL /* BPF_FUNC_l4_csum_replace flags. */ #define BPF_F_PSEUDO_HDR (1ULL << 4) #define BPF_F_MARK_MANGLED_0 (1ULL << 5) #define BPF_F_MARK_ENFORCE (1ULL << 6) /* BPF_FUNC_clone_redirect and BPF_FUNC_redirect flags. */ #define BPF_F_INGRESS (1ULL << 0) /* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */ #define BPF_F_TUNINFO_IPV6 (1ULL << 0) /* BPF_FUNC_get_stackid flags. */ #define BPF_F_SKIP_FIELD_MASK 0xffULL #define BPF_F_USER_STACK (1ULL << 8) #define BPF_F_FAST_STACK_CMP (1ULL << 9) #define BPF_F_REUSE_STACKID (1ULL << 10) /* BPF_FUNC_skb_set_tunnel_key flags. */ #define BPF_F_ZERO_CSUM_TX (1ULL << 1) #define BPF_F_DONT_FRAGMENT (1ULL << 2) /* BPF_FUNC_perf_event_output and BPF_FUNC_perf_event_read flags. */ #define BPF_F_INDEX_MASK 0xffffffffULL #define BPF_F_CURRENT_CPU BPF_F_INDEX_MASK /* BPF_FUNC_perf_event_output for sk_buff input context. */ #define BPF_F_CTXLEN_MASK (0xfffffULL << 32) /* Mode for BPF_FUNC_skb_adjust_room helper. */ enum bpf_adj_room_mode { BPF_ADJ_ROOM_NET, }; /* user accessible mirror of in-kernel sk_buff. * new fields can only be added to the end of this structure */ struct __sk_buff { __u32 len; __u32 pkt_type; __u32 mark; __u32 queue_mapping; __u32 protocol; __u32 vlan_present; __u32 vlan_tci; __u32 vlan_proto; __u32 priority; __u32 ingress_ifindex; __u32 ifindex; __u32 tc_index; __u32 cb[5]; __u32 hash; __u32 tc_classid; __u32 data; __u32 data_end; __u32 napi_id; /* accessed by BPF_PROG_TYPE_sk_skb types */ __u32 family; __u32 remote_ip4; /* Stored in network byte order */ __u32 local_ip4; /* Stored in network byte order */ __u32 remote_ip6[4]; /* Stored in network byte order */ __u32 local_ip6[4]; /* Stored in network byte order */ __u32 remote_port; /* Stored in network byte order */ __u32 local_port; /* stored in host byte order */ }; struct bpf_tunnel_key { __u32 tunnel_id; union { __u32 remote_ipv4; __u32 remote_ipv6[4]; }; __u8 tunnel_tos; __u8 tunnel_ttl; __u16 tunnel_ext; __u32 tunnel_label; }; /* Generic BPF return codes which all BPF program types may support. * The values are binary compatible with their TC_ACT_* counter-part to * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT * programs. * * XDP is handled seprately, see XDP_*. */ enum bpf_ret_code { BPF_OK = 0, /* 1 reserved */ BPF_DROP = 2, /* 3-6 reserved */ BPF_REDIRECT = 7, /* >127 are reserved for prog type specific return codes */ }; struct bpf_sock { __u32 bound_dev_if; __u32 family; __u32 type; __u32 protocol; __u32 mark; __u32 priority; }; #define XDP_PACKET_HEADROOM 256 /* User return codes for XDP prog type. * A valid XDP program must return one of these defined values. All other * return codes are reserved for future use. Unknown return codes will * result in packet drops and a warning via bpf_warn_invalid_xdp_action(). */ enum xdp_action { XDP_ABORTED = 0, XDP_DROP, XDP_PASS, XDP_TX, XDP_REDIRECT, }; /* user accessible metadata for XDP packet hook * new fields must be added to the end of this structure */ struct xdp_md { __u32 data; __u32 data_end; }; enum sk_action { SK_DROP = 0, SK_PASS, }; #define BPF_TAG_SIZE 8 struct bpf_prog_info { __u32 type; __u32 id; __u8 tag[BPF_TAG_SIZE]; __u32 jited_prog_len; __u32 xlated_prog_len; __aligned_u64 jited_prog_insns; __aligned_u64 xlated_prog_insns; } __attribute__((aligned(8))); struct bpf_map_info { __u32 type; __u32 id; __u32 key_size; __u32 value_size; __u32 max_entries; __u32 map_flags; } __attribute__((aligned(8))); /* User bpf_sock_ops struct to access socket values and specify request ops * and their replies. * Some of this fields are in network (bigendian) byte order and may need * to be converted before use (bpf_ntohl() defined in samples/bpf/bpf_endian.h). * New fields can only be added at the end of this structure */ struct bpf_sock_ops { __u32 op; union { __u32 reply; __u32 replylong[4]; }; __u32 family; __u32 remote_ip4; /* Stored in network byte order */ __u32 local_ip4; /* Stored in network byte order */ __u32 remote_ip6[4]; /* Stored in network byte order */ __u32 local_ip6[4]; /* Stored in network byte order */ __u32 remote_port; /* Stored in network byte order */ __u32 local_port; /* stored in host byte order */ }; /* List of known BPF sock_ops operators. * New entries can only be added at the end */ enum { BPF_SOCK_OPS_VOID, BPF_SOCK_OPS_TIMEOUT_INIT, /* Should return SYN-RTO value to use or * -1 if default value should be used */ BPF_SOCK_OPS_RWND_INIT, /* Should return initial advertized * window (in packets) or -1 if default * value should be used */ BPF_SOCK_OPS_TCP_CONNECT_CB, /* Calls BPF program right before an * active connection is initialized */ BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB, /* Calls BPF program when an * active connection is * established */ BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB, /* Calls BPF program when a * passive connection is * established */ BPF_SOCK_OPS_NEEDS_ECN, /* If connection's congestion control * needs ECN */ }; #define TCP_BPF_IW 1001 /* Set TCP initial congestion window */ #define TCP_BPF_SNDCWND_CLAMP 1002 /* Set sndcwnd_clamp */ #endif /* __LINUX_BPF_H__ */