From 5b05b1d7a2d2001d9711856608f61abaf7b9a9a5 Mon Sep 17 00:00:00 2001 From: Alexandru Gagniuc Date: Fri, 23 Jun 2023 13:34:56 +0200 Subject: [PATCH 6/8] nss_dp_main: Use a 'phy-handle' property to connect to the PHY The original method of connecting a PHY to the ethernet controller requires the "qcom,link-poll", and "qcom,phy-mdio-addr" devicetree properties. This is redundant. The PHY node already contains the MDIO address, and attaching a PHY implies "link-poll". Allow using a "phy-handle" property. Remove the following properties, as they are no longer used: * "qcom,link-poll" * "qcom,phy-mdio-addr" * "mdio-bus" * "qcom,forced-speed" * "qcom,forced-duplex" Signed-off-by: Alexandru Gagniuc Signed-off-by: Robert Marko --- include/nss_dp_dev.h | 5 +-- nss_dp_main.c | 91 +++++++------------------------------------- 2 files changed, 14 insertions(+), 82 deletions(-) --- a/include/nss_dp_dev.h +++ b/include/nss_dp_dev.h @@ -225,13 +225,10 @@ struct nss_dp_dev { unsigned long drv_flags; /* Driver specific feature flags */ /* Phy related stuff */ + struct device_node *phy_node; /* Phy device OF node */ struct phy_device *phydev; /* Phy device */ struct mii_bus *miibus; /* MII bus */ uint32_t phy_mii_type; /* RGMII/SGMII/QSGMII */ - uint32_t phy_mdio_addr; /* Mdio address */ - bool link_poll; /* Link polling enable? */ - uint32_t forced_speed; /* Forced speed? */ - uint32_t forced_duplex; /* Forced duplex? */ uint32_t link_state; /* Current link state */ uint32_t pause; /* Current flow control settings */ --- a/nss_dp_main.c +++ b/nss_dp_main.c @@ -436,7 +436,7 @@ static int nss_dp_open(struct net_device netif_start_queue(netdev); - if (!dp_priv->link_poll) { + if (!dp_priv->phydev) { /* Notify data plane link is up */ if (dp_priv->data_plane_ops->link_state(dp_priv->dpc, 1)) { netdev_dbg(netdev, "Data plane set link failed\n"); @@ -633,6 +633,12 @@ static int32_t nss_dp_of_get_pdata(struc return -EFAULT; } + dp_priv->phy_node = of_parse_phandle(np, "phy-handle", 0); + if (!dp_priv->phy_node) { + pr_err("%s: error parsing phy-handle\n", np->name); + return -EFAULT; + } + if (of_property_read_u32(np, "qcom,mactype", &hal_pdata->mactype)) { pr_err("%s: error reading mactype\n", np->name); return -EFAULT; @@ -653,18 +659,6 @@ static int32_t nss_dp_of_get_pdata(struc return -EFAULT; #endif - dp_priv->link_poll = of_property_read_bool(np, "qcom,link-poll"); - if (of_property_read_u32(np, "qcom,phy-mdio-addr", - &dp_priv->phy_mdio_addr) && dp_priv->link_poll) { - pr_err("%s: mdio addr required if link polling is enabled\n", - np->name); - return -EFAULT; - } - - of_property_read_u32(np, "qcom,forced-speed", &dp_priv->forced_speed); - of_property_read_u32(np, "qcom,forced-duplex", &dp_priv->forced_duplex); - - #if (LINUX_VERSION_CODE < KERNEL_VERSION(6, 1, 0)) maddr = (uint8_t *)of_get_mac_address(np); #if (LINUX_VERSION_CODE > KERNEL_VERSION(5, 4, 0)) @@ -753,56 +747,6 @@ static int32_t nss_dp_of_get_pdata(struc return 0; } -/* - * nss_dp_mdio_attach() - */ -static struct mii_bus *nss_dp_mdio_attach(struct platform_device *pdev) -{ - struct device_node *mdio_node; - struct platform_device *mdio_plat; -#if (LINUX_VERSION_CODE < KERNEL_VERSION(6,1,0)) - struct ipq40xx_mdio_data *mdio_data; -#endif - - /* - * Find mii_bus using "mdio-bus" handle. - */ - mdio_node = of_parse_phandle(pdev->dev.of_node, "mdio-bus", 0); - if (mdio_node) { - return of_mdio_find_bus(mdio_node); - } - - mdio_node = of_find_compatible_node(NULL, NULL, "qcom,qca-mdio"); - if (!mdio_node) { - mdio_node = of_find_compatible_node(NULL, NULL, - "qcom,ipq40xx-mdio"); - if (!mdio_node) { - dev_err(&pdev->dev, "cannot find mdio node by phandle\n"); - return NULL; - } - } - - mdio_plat = of_find_device_by_node(mdio_node); - if (!mdio_plat) { - dev_err(&pdev->dev, "cannot find platform device from mdio node\n"); - of_node_put(mdio_node); - return NULL; - } - -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6,1,0)) - return dev_get_drvdata(&mdio_plat->dev); -#else - mdio_data = dev_get_drvdata(&mdio_plat->dev); - if (!mdio_data) { - dev_err(&pdev->dev, "cannot get mii bus reference from device data\n"); - of_node_put(mdio_node); - return NULL; - } - - return mdio_data->mii_bus; -#endif -} - #ifdef CONFIG_NET_SWITCHDEV /* * nss_dp_is_phy_dev() @@ -861,7 +805,6 @@ static int32_t nss_dp_probe(struct platf struct device_node *np = pdev->dev.of_node; struct nss_gmac_hal_platform_data gmac_hal_pdata; int32_t ret = 0; - uint8_t phy_id[MII_BUS_ID_SIZE + 3]; #if defined(NSS_DP_PPE_SUPPORT) uint32_t vsi_id; fal_port_t port_id; @@ -940,22 +883,16 @@ static int32_t nss_dp_probe(struct platf dp_priv->drv_flags |= NSS_DP_PRIV_FLAG(INIT_DONE); - if (dp_priv->link_poll) { - dp_priv->miibus = nss_dp_mdio_attach(pdev); - if (!dp_priv->miibus) { - netdev_dbg(netdev, "failed to find miibus\n"); - goto phy_setup_fail; - } - snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, - dp_priv->miibus->id, dp_priv->phy_mdio_addr); + if (dp_priv->phy_node) { - dp_priv->phydev = phy_connect(netdev, phy_id, - &nss_dp_adjust_link, - dp_priv->phy_mii_type); - if (IS_ERR(dp_priv->phydev)) { - netdev_dbg(netdev, "failed to connect to phy device\n"); - goto phy_setup_fail; - } + dp_priv->phydev = of_phy_connect(netdev, dp_priv->phy_node, + &nss_dp_adjust_link, 0, + dp_priv->phy_mii_type); + if (!(dp_priv->phydev)) { + netdev_err(netdev, "failed to connect to phy device\n"); + goto phy_setup_fail; + } + phy_attached_info(dp_priv->phydev); } #if defined(NSS_DP_PPE_SUPPORT)