// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "ar7242.dtsi" #include #include #include / { compatible = "tplink,tl-wr2543-v1", "qca,ar7242"; model = "TP-Link TL-WR2543N/ND"; aliases { led-boot = &led_wps; led-failsafe = &led_wps; led-running = &led_wps; led-upgrade = &led_wps; label-mac-device = ð0; }; chosen { bootargs = "console=ttyS0,115200n8"; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; wps { label = "wps"; linux,code = ; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; led_wps: wps { function = LED_FUNCTION_WPS; color = ; gpios = <&gpio 0 GPIO_ACTIVE_LOW>; }; usb { function = LED_FUNCTION_USB; color = ; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; trigger-sources = <&hub_port>; linux,default-trigger = "usbport"; }; }; ath9k-leds { compatible = "gpio-leds"; wlan2g { label = "green:wlan2g"; gpios = <&ath9k 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wlan5g { label = "green:wlan5g"; gpios = <&ath9k 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; }; rtl8367 { compatible = "realtek,rtl8367"; gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>; gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>; realtek,extif = <9 1 0 1 1 1 1 1 1 2>; mdio-bus { #address-cells = <1>; #size-cells = <0>; status = "okay"; phy0: ethernet-phy@0 { reg = <0>; }; }; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; uboot: partition@0 { label = "u-boot"; reg = <0x000000 0x020000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_uboot_1fc00: macaddr@1fc00 { reg = <0x1fc00 0x6>; }; }; }; partition@20000 { compatible = "tplink,firmware"; label = "firmware"; reg = <0x020000 0x7d0000>; }; partition@7f0000 { label = "art"; reg = <0x7f0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; cal_art_1000: cal@1000 { reg = <0x1000 0x440>; }; }; }; }; }; }; &usb { status = "okay"; }; &usb_phy { status = "okay"; }; &pcie { status = "okay"; ath9k: wifi@0,0 { reg = <0x0000 0 0 0 0>; #gpio-cells = <2>; gpio-controller; nvmem-cells = <&macaddr_uboot_1fc00>, <&cal_art_1000>; nvmem-cell-names = "mac-address", "calibration"; }; }; ð0 { status = "okay"; phy-mode = "rgmii"; nvmem-cells = <&macaddr_uboot_1fc00>; nvmem-cell-names = "mac-address"; phy-handle = <&phy0>; fixed-link { speed = <1000>; full-duplex; }; };