// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "ar9344.dtsi" #include #include #include / { keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; }; virtual_flash { compatible = "mtd-concat"; devices = <&fwconcat0 &fwconcat1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { compatible = "openwrt,uimage", "denx,uimage"; openwrt,ih-magic = ; label = "firmware"; reg = <0x0 0x0>; }; }; }; }; &ref { clock-frequency = <40000000>; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x010000>; }; fwconcat0: partition@50000 { label = "fwconcat0"; reg = <0x050000 0x800000>; }; partition@850000 { label = "loader"; reg = <0x850000 0x010000>; read-only; }; fwconcat1: partition@860000 { label = "fwconcat1"; reg = <0x860000 0x740000>; }; partition@fa0000 { label = "config"; reg = <0xfa0000 0x040000>; read-only; }; partition@fe0000 { label = "mib0"; reg = <0xfe0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_mib0_4b: macaddr@4b { compatible = "mac-base"; reg = <0x4b 0x11>; #nvmem-cell-cells = <1>; }; macaddr_mib0_66: macaddr@66 { compatible = "mac-base"; reg = <0x66 0x11>; #nvmem-cell-cells = <1>; }; }; }; partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; calibration_ath9k: calibration@1000 { reg = <0x1000 0x440>; }; macaddr_art_1002: macaddr@1002 { reg = <0x1002 0x6>; }; }; }; }; }; }; &mdio0 { status = "okay"; phy0: ethernet-phy@0 { reg = <0>; phy-mode = "rgmii"; }; }; ð0 { status = "okay"; pll-data = <0x06000000 0x00000101 0x00001313>; nvmem-cells = <&macaddr_art_1002>; nvmem-cell-names = "mac-address"; phy-mode = "rgmii-id"; phy-handle = <&phy0>; gmac-config { device = <&gmac>; rxdv-delay = <3>; rxd-delay = <3>; txen-delay = <3>; txd-delay = <3>; rgmii-gmac0 = <1>; }; }; &wmac { status = "okay"; ieee80211-freq-limit = <2402000 2482000>; nvmem-cells = <&macaddr_mib0_4b 0>, <&calibration_ath9k>; nvmem-cell-names = "mac-address", "calibration"; };