From aeba5dbed3c88a4408b66c93d30d67043b303332 Mon Sep 17 00:00:00 2001 From: Naushir Patuck Date: Wed, 8 Nov 2023 10:05:05 +0000 Subject: [PATCH 0723/1085] drivers: media: cfe: Don't confuse MHz and Mbps The driver was interchaning these units when talking about link rate. Fix this to avoid confusion. Apart from the logging message change, there is no function change in this commit. Signed-off-by: Naushir Patuck --- drivers/media/platform/raspberrypi/rp1_cfe/cfe.c | 8 ++++---- drivers/media/platform/raspberrypi/rp1_cfe/dphy.c | 10 +++++----- drivers/media/platform/raspberrypi/rp1_cfe/dphy.h | 2 +- 3 files changed, 10 insertions(+), 10 deletions(-) --- a/drivers/media/platform/raspberrypi/rp1_cfe/cfe.c +++ b/drivers/media/platform/raspberrypi/rp1_cfe/cfe.c @@ -983,7 +983,7 @@ static void cfe_buffer_queue(struct vb2_ spin_unlock_irqrestore(&cfe->state_lock, flags); } -static u64 sensor_link_frequency(struct cfe_device *cfe) +static u64 sensor_link_rate(struct cfe_device *cfe) { struct v4l2_mbus_framefmt *source_fmt; struct v4l2_subdev_state *state; @@ -1028,11 +1028,11 @@ static u64 sensor_link_frequency(struct /* x2 for DDR. */ link_freq *= 2; - cfe_info("Using a link frequency of %lld Hz\n", link_freq); + cfe_info("Using a link rate of %lld Mbps\n", link_freq / (1000 * 1000)); return link_freq; err: - cfe_err("Unable to determine sensor link frequency, using 999 MHz\n"); + cfe_err("Unable to determine sensor link rate, using 999 Mbps\n"); return 999 * 1000000UL; } @@ -1104,7 +1104,7 @@ static int cfe_start_streaming(struct vb } cfe_dbg("Configuring CSI-2 block\n"); - cfe->csi2.dphy.dphy_freq = sensor_link_frequency(cfe) / 1000000UL; + cfe->csi2.dphy.dphy_rate = sensor_link_rate(cfe) / 1000000UL; csi2_open_rx(&cfe->csi2); cfe_dbg("Starting sensor streaming\n"); --- a/drivers/media/platform/raspberrypi/rp1_cfe/dphy.c +++ b/drivers/media/platform/raspberrypi/rp1_cfe/dphy.c @@ -96,7 +96,7 @@ static uint8_t dphy_transaction(struct d return get_tstdout(dphy); } -static void dphy_set_hsfreqrange(struct dphy_data *dphy, uint32_t freq_mhz) +static void dphy_set_hsfreqrange(struct dphy_data *dphy, uint32_t mbps) { /* See Table 5-1 on page 65 of dphy databook */ static const u16 hsfreqrange_table[][2] = { @@ -116,11 +116,11 @@ static void dphy_set_hsfreqrange(struct }; unsigned int i; - if (freq_mhz < 80 || freq_mhz > 1500) - dphy_err("DPHY: Frequency %u MHz out of range\n", freq_mhz); + if (mbps < 80 || mbps > 1500) + dphy_err("DPHY: Datarate %u Mbps out of range\n", mbps); for (i = 0; i < ARRAY_SIZE(hsfreqrange_table) - 1; i++) { - if (freq_mhz <= hsfreqrange_table[i][0]) + if (mbps <= hsfreqrange_table[i][0]) break; } @@ -139,7 +139,7 @@ static void dphy_init(struct dphy_data * set_tstclr(dphy, 0); usleep_range(15, 20); - dphy_set_hsfreqrange(dphy, dphy->dphy_freq); + dphy_set_hsfreqrange(dphy, dphy->dphy_rate); usleep_range(5, 10); dw_csi2_host_write(dphy, PHY_SHUTDOWNZ, 1); --- a/drivers/media/platform/raspberrypi/rp1_cfe/dphy.h +++ b/drivers/media/platform/raspberrypi/rp1_cfe/dphy.h @@ -15,7 +15,7 @@ struct dphy_data { void __iomem *base; - u32 dphy_freq; + u32 dphy_rate; u32 num_lanes; };