From c33899a6a8c1a5723afbfc075600aba2e2bdbea7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= Date: Tue, 6 Feb 2024 01:08:04 +0300 Subject: [PATCH 14/30] net: dsa: mt7530: simplify mt7530_pad_clk_setup() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This code is from before this driver was converted to phylink API. Phylink deals with the unsupported interface cases before mt7530_pad_clk_setup() is run. Therefore, the default case would never run. However, it must be defined nonetheless to handle all the remaining enumeration values, the phy-modes. Switch to if statement for RGMII and return which simplifies the code and saves an indent. Set P6_INTF_MODE, which is the three least significant bits of the MT7530_P6ECR register, to 0 for RGMII even though it will already be 0 after reset. This is to keep supporting dynamic reconfiguration of the port in the case the interface changes from TRGMII to RGMII. Disable the TRGMII clocks for all cases. They will be enabled if TRGMII is being used. Read XTAL after checking for RGMII as it's only needed for the TRGMII interface mode. Reviewed-by: Daniel Golle Reviewed-by: Russell King (Oracle) Signed-off-by: Arınç ÜNAL Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-3-d7d92a185cb1@arinc9.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mt7530.c | 91 ++++++++++++++++++---------------------- 1 file changed, 40 insertions(+), 51 deletions(-) --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -418,65 +418,54 @@ static int mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; - u32 ncpo1, ssc_delta, trgint, xtal; + u32 ncpo1, ssc_delta, xtal; - xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; + /* Disable the MT7530 TRGMII clocks */ + core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); - switch (interface) { - case PHY_INTERFACE_MODE_RGMII: - trgint = 0; - break; - case PHY_INTERFACE_MODE_TRGMII: - trgint = 1; - if (xtal == HWTRAP_XTAL_25MHZ) - ssc_delta = 0x57; - else - ssc_delta = 0x87; - if (priv->id == ID_MT7621) { - /* PLL frequency: 125MHz: 1.0GBit */ - if (xtal == HWTRAP_XTAL_40MHZ) - ncpo1 = 0x0640; - if (xtal == HWTRAP_XTAL_25MHZ) - ncpo1 = 0x0a00; - } else { /* PLL frequency: 250MHz: 2.0Gbit */ - if (xtal == HWTRAP_XTAL_40MHZ) - ncpo1 = 0x0c80; - if (xtal == HWTRAP_XTAL_25MHZ) - ncpo1 = 0x1400; - } - break; - default: - dev_err(priv->dev, "xMII interface %d not supported\n", - interface); - return -EINVAL; + if (interface == PHY_INTERFACE_MODE_RGMII) { + mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, + P6_INTF_MODE(0)); + return 0; } - mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, - P6_INTF_MODE(trgint)); + mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1)); - if (trgint) { - /* Disable the MT7530 TRGMII clocks */ - core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); - - /* Setup the MT7530 TRGMII Tx Clock */ - core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); - core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); - core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); - core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); - core_write(priv, CORE_PLL_GROUP4, - RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN | - RG_SYSPLL_BIAS_LPF_EN); - core_write(priv, CORE_PLL_GROUP2, - RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN | - RG_SYSPLL_POSDIV(1)); - core_write(priv, CORE_PLL_GROUP7, - RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) | - RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); + xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; - /* Enable the MT7530 TRGMII clocks */ - core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); + if (xtal == HWTRAP_XTAL_25MHZ) + ssc_delta = 0x57; + else + ssc_delta = 0x87; + + if (priv->id == ID_MT7621) { + /* PLL frequency: 125MHz: 1.0GBit */ + if (xtal == HWTRAP_XTAL_40MHZ) + ncpo1 = 0x0640; + if (xtal == HWTRAP_XTAL_25MHZ) + ncpo1 = 0x0a00; + } else { /* PLL frequency: 250MHz: 2.0Gbit */ + if (xtal == HWTRAP_XTAL_40MHZ) + ncpo1 = 0x0c80; + if (xtal == HWTRAP_XTAL_25MHZ) + ncpo1 = 0x1400; } + /* Setup the MT7530 TRGMII Tx Clock */ + core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); + core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); + core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); + core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); + core_write(priv, CORE_PLL_GROUP4, RG_SYSPLL_DDSFBK_EN | + RG_SYSPLL_BIAS_EN | RG_SYSPLL_BIAS_LPF_EN); + core_write(priv, CORE_PLL_GROUP2, RG_SYSPLL_EN_NORMAL | + RG_SYSPLL_VODEN | RG_SYSPLL_POSDIV(1)); + core_write(priv, CORE_PLL_GROUP7, RG_LCDDS_PCW_NCPO_CHG | + RG_LCCDS_C(3) | RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); + + /* Enable the MT7530 TRGMII clocks */ + core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); + return 0; }