From 482fe0cb90d3376051304531a01edccac9ca1868 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Thu, 29 Feb 2024 10:05:26 -0800
Subject: [PATCH 412/413] 6.10: arm64: dts: imx8mp-venice-gw72xx: add mac addr
 for eth1

Add the PCI bus topology for eth1 so that boot firmware can set the
local-mac-address property.

The eth1 device is behind a PCI switch:
 # lspci -n
 00:00.0 0604: 16c3:abcd (rev 01)
 01:00.0 0604: 12d8:b404 (rev 01)
 02:01.0 0604: 12d8:b404 (rev 01)
 02:02.0 0604: 12d8:b404 (rev 01)
 02:03.0 0604: 12d8:b404 (rev 01)
 05:00.0 0200: 11ab:4380
 # lspci -t
 -[0000:00]---00.0-[01-ff]----00.0-[02-05]--+-01.0-[03]--
                                           +-02.0-[04]--
                                           \-03.0-[05]----00.0

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 .../dts/freescale/imx8mp-venice-gw72xx.dtsi   | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)

--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -8,6 +8,10 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	aliases {
+		ethernet1 = &eth1;
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -137,6 +141,39 @@
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			pcie@3,0 {
+				reg = <0x1800 0 0 0 0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				eth1: ethernet@0,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
 };
 
 /* GPS */