From 9c7a86c935074525f24cc20e78a7d5150e4600e3 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 9 Jul 2024 00:23:04 +0200 Subject: [PATCH] MIPS: lantiq: improve USB initialization This adds code to initialize the USB controller and PHY also on Danube, Amazon SE and AR10. This code is based on the Vendor driver from different UGW versions and compared to the hardware documentation. This patch is included in OpenWrt for many years. Signed-off-by: Hauke Mehrtens Signed-off-by: Thomas Bogendoerfer --- arch/mips/lantiq/xway/sysctrl.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -247,6 +247,25 @@ static void pmu_disable(struct clk *clk) pr_warn("deactivating PMU module failed!"); } +static void usb_set_clock(void) +{ + unsigned int val = ltq_cgu_r32(ifccr); + + if (of_machine_is_compatible("lantiq,ar10") || + of_machine_is_compatible("lantiq,grx390")) { + val &= ~0x03; /* XTAL divided by 3 */ + } else if (of_machine_is_compatible("lantiq,ar9") || + of_machine_is_compatible("lantiq,vr9")) { + /* TODO: this depends on the XTAL frequency */ + val |= 0x03; /* XTAL divided by 3 */ + } else if (of_machine_is_compatible("lantiq,ase")) { + val |= 0x20; /* from XTAL */ + } else if (of_machine_is_compatible("lantiq,danube")) { + val |= 0x30; /* 12 MHz, generated from 36 MHz */ + } + ltq_cgu_w32(val, ifccr); +} + /* the pci enable helper */ static int pci_enable(struct clk *clk) { @@ -588,4 +607,5 @@ void __init ltq_soc_init(void) clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); } + usb_set_clock(); }