# Makefile.in generated by automake 1.16.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2020 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Make Autoconf.
# Copyright (C) 1999-2004, 2006-2017, 2020-2021 Free Software
# Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# Freeze M4 files.
# Copyright (C) 2002, 2004, 2006-2017, 2020-2021 Free Software
# Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# Make Autoconf commands.
# Copyright (C) 1999-2007, 2009-2017, 2020-2021 Free Software
# Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# Make Autoconf documentation.
# Copyright (C) 2000-2003, 2007-2017, 2020-2021 Free Software
# Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# Make Autoconf-related libraries.
# Copyright (C) 2001-2005, 2009-2017, 2020-2021 Free Software
# Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# Make Autoconf man pages.
# Copyright (C) 2001, 2004-2017, 2020-2021 Free Software Foundation,
# Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# Copyright (C) 2000-2017, 2020-2021 Free Software Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@MAKE_CASE_SENSITIVE_TRUE@am__append_1 = $(srcdir)/INSTALL
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
$(top_srcdir)/m4/m4.m4 $(top_srcdir)/m4/make-case.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(srcdir)/doc/version.texi \
$(srcdir)/doc/stamp-vti $(dist_lisp_LISP) \
$(dist_autoconflib_DATA) $(dist_autotestlib_DATA) \
$(dist_buildaux_DATA) $(dist_m4sugarlib_DATA) \
$(dist_perllib_DATA) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES = tests/atlocal
CONFIG_CLEAN_VPATH_FILES = GNUmakefile
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" \
"$(DESTDIR)$(lispdir)" "$(DESTDIR)$(man1dir)" \
"$(DESTDIR)$(autoconflibdir)" "$(DESTDIR)$(autotestlibdir)" \
"$(DESTDIR)$(buildauxdir)" "$(DESTDIR)$(m4sugarlibdir)" \
"$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(autoconflibdir)" \
"$(DESTDIR)$(autoscanlibdir)" "$(DESTDIR)$(autotestlibdir)" \
"$(DESTDIR)$(m4sugarlibdir)" "$(DESTDIR)$(pkgdatadir)" \
"$(DESTDIR)$(pkgdatadir)"
SCRIPTS = $(bin_SCRIPTS) $(noinst_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
am__v_DVIPS_0 = @echo " DVIPS " $@;
am__v_DVIPS_1 =
AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
am__v_MAKEINFO_1 =
AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
am__v_INFOHTML_0 = @echo " INFOHTML" $@;
am__v_INFOHTML_1 =
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
am__v_TEXI2DVI_1 =
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
am__v_TEXI2PDF_1 =
AM_V_texinfo = $(am__v_texinfo_@AM_V@)
am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
am__v_texinfo_0 = -q
am__v_texinfo_1 =
AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 =
am__dirstamp = $(am__leading_dot)dirstamp
INFO_DEPS = $(srcdir)/doc/autoconf.info $(srcdir)/doc/standards.info
am__TEXINFO_TEX_DIR = $(srcdir)/build-aux
DVIS = doc/autoconf.dvi doc/standards.dvi
PDFS = doc/autoconf.pdf doc/standards.pdf
PSS = doc/autoconf.ps doc/standards.ps
HTMLS = doc/autoconf.html doc/standards.html
TEXINFOS = doc/autoconf.texi doc/standards.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__emacs_byte_compile_setup = \
(if (boundp (quote byte-compile-dest-file-function)) \
(setq byte-compile-dest-file-function (lambda (_) "$@")) \
(defun byte-compile-dest-file (_) "$@") \
)
dist_lispLISP_INSTALL = $(INSTALL_DATA)
LISP = $(dist_lisp_LISP)
am__ELFILES = lib/emacs/autoconf-mode.el lib/emacs/autotest-mode.el
am__ELCFILES = $(am__ELFILES:.el=.elc)
ELCFILES = $(LISP:.el=.elc)
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(dist_man_MANS)
DATA = $(dist_autoconflib_DATA) $(dist_autotestlib_DATA) \
$(dist_buildaux_DATA) $(dist_m4sugarlib_DATA) \
$(dist_perllib_DATA) $(nodist_autoconflib_DATA) \
$(nodist_autoscanlib_DATA) $(nodist_autotestlib_DATA) \
$(nodist_m4sugarlib_DATA) $(nodist_pkgdata_DATA) \
$(pkgdata_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
AM_RECURSIVE_TARGETS = cscope
am__DIST_COMMON = $(dist_man_MANS) $(doc_autoconf_TEXINFOS) \
$(doc_standards_TEXINFOS) $(srcdir)/GNUmakefile \
$(srcdir)/Makefile.in $(srcdir)/bin/local.mk \
$(srcdir)/doc/local.mk $(srcdir)/lib/freeze.mk \
$(srcdir)/lib/local.mk $(srcdir)/man/local.mk \
$(srcdir)/tests/local.mk $(top_srcdir)/build-aux/config.guess \
$(top_srcdir)/build-aux/config.sub \
$(top_srcdir)/build-aux/install-sh \
$(top_srcdir)/build-aux/mdate-sh \
$(top_srcdir)/build-aux/missing $(top_srcdir)/tests/atlocal.in \
AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS TODO \
build-aux/config.guess build-aux/config.sub \
build-aux/install-sh build-aux/mdate-sh build-aux/missing \
build-aux/texinfo.tex
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
GZIP_ENV = --best
DIST_TARGETS = dist-xz dist-gzip
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EMACS = @EMACS@
EMACSLOADPATH = @EMACSLOADPATH@
EXPR = @EXPR@
GREP = @GREP@
HELP2MAN = @HELP2MAN@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
M4 = @M4@
M4_DEBUGFILE = @M4_DEBUGFILE@
M4_GNU = @M4_GNU@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PERL_FLOCK = @PERL_FLOCK@
RELEASE_YEAR = @RELEASE_YEAR@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHELL_N = @SHELL_N@
STRIP = @STRIP@
TEST_EMACS = @TEST_EMACS@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_cv_dir_trailing_space = @ac_cv_dir_trailing_space@
ac_cv_unsupported_fs_chars = @ac_cv_unsupported_fs_chars@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
lispdir = @lispdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I m4
ETAGS_ARGS = $(ETAGS_PERL) $(ETAGS_SH) $(ETAGS_FOR_AUTOCONF)
# Files that should be removed, but which Automake does not know.
MOSTLYCLEANFILES = $(bin_SCRIPTS) bin/autoconf.in bin/*.tmp \
$(dist_man_MANS:=.t) $(dist_man_MANS:=a.t)
# Files from texi2dvi that should be removed, but which Automake does
# not know.
# All the files below depend on Makefile so that they are rebuilt
# when the prefix, etc. changes. Unfortunately, suffix rules
# cannot have additional dependencies, so we have to use explicit rules.
# TODO: This is required to work around a limitation in older
# Automake. Remove once we can assume Automake 1.13 or later.
# The hairy heredoc is more robust than using echo.
CLEANFILES = autoconf.ACs autoconf.cvs autoconf.MSs autoconf.prs \
autoconf.ATs autoconf.evs autoconf.fns autoconf.ovs \
autoconf.ca autoconf.CA autoconf.cas autoconf.CAs autoconf.tmp \
lib/autom4te.cfg autoconf-mode.elc autotest-mode.elc \
$(nodist_autoconflib_DATA) lib/autoscan/autoscan.list \
$(nodist_m4sugarlib_DATA) $(nodist_autotestlib_DATA) \
tests/package.m4 tests/wrapper.in $(wrappers) \
$(TESTSUITE_GENERATED_AT) tests/mktests.tmp \
tests/mktests.stamp expr
DISTCLEANFILES = tests/atconfig tests/atlocal $(TESTSUITE)
MAINTAINERCLEANFILES = $(am__append_1) $(dist_man_MANS) \
$(TESTSUITE_GENERATED_AT)
SUFFIXES = .m4 .m4f .w .1
# We don't actually distribute the built testsuite or package.m4, since one
# only needs m4 to build them, and m4 is required to install Autoconf.
# But if you are borrowing from this file for setting up autotest in your
# project, remember to distribute both testsuite and package.m4.
EXTRA_DIST = ChangeLog.0 ChangeLog.1 ChangeLog.2 ChangeLog.3 BUGS \
COPYINGv3 COPYING.EXCEPTION GNUmakefile maint.mk cfg.mk \
build-aux/gendocs.sh build-aux/git-version-gen \
build-aux/announce-gen build-aux/gnupload \
build-aux/gitlog-to-changelog build-aux/help-extract.pl \
.prev-version .version bin/autoconf.as bin/autoheader.in \
bin/autom4te.in bin/autoreconf.in bin/autoscan.in \
bin/autoupdate.in bin/ifnames.in doc/gendocs_template \
lib/autom4te.in lib/autoscan/autoscan.pre \
$(dist_man_MANS:.1=.w) $(dist_man_MANS:.1=.x) man/common.x \
tests/local.at tests/mktests.pl tests/atlocal.in \
tests/wrapper.as tests/statesave.m4 $(TESTSUITE_HAND_AT) \
$(TESTSUITE_EXTRA)
edit = sed \
-e 's|@SHELL[@]|$(SHELL)|g' \
-e 's|@PERL[@]|$(PERL)|g' \
-e 's|@PERL_FLOCK[@]|$(PERL_FLOCK)|g' \
-e 's|@bindir[@]|$(bindir)|g' \
-e 's|@pkgdatadir[@]|$(pkgdatadir)|g' \
-e 's|@prefix[@]|$(prefix)|g' \
-e 's|@autoconf-name[@]|'`echo autoconf | sed '$(transform)'`'|g' \
-e 's|@autoheader-name[@]|'`echo autoheader | sed '$(transform)'`'|g' \
-e 's|@autom4te-name[@]|'`echo autom4te | sed '$(transform)'`'|g' \
-e 's|@M4[@]|$(M4)|g' \
-e 's|@M4_DEBUGFILE[@]|$(M4_DEBUGFILE)|g' \
-e 's|@M4_GNU[@]|$(M4_GNU)|g' \
-e 's|@AWK[@]|$(AWK)|g' \
-e 's|@RELEASE_YEAR[@]|$(RELEASE_YEAR)|g' \
-e 's|@VERSION[@]|$(VERSION)|g' \
-e 's|@PACKAGE_NAME[@]|$(PACKAGE_NAME)|g' \
-e 's|@configure_input[@]|Generated from $@.in; do not edit by hand.|g'
AUTOM4TE_CFG = lib/autom4te.cfg
# Do not use AUTOM4TE here, since maint.mk (my-distcheck)
# checks if we are independent of Autoconf by defining AUTOM4TE (and
# others) to `false'. Autoconf provides autom4te, so that doesn't
# apply to us.
MY_AUTOM4TE = \
autom4te_perllibdir='$(top_srcdir)'/lib \
AUTOM4TE_CFG='$(AUTOM4TE_CFG)' $(top_build_prefix)bin/autom4te \
-B '$(top_build_prefix)'lib -B '$(top_srcdir)'/lib # keep ` '
# Factor the dependencies between all the frozen files.
# Some day we should explain to Automake how to use autom4te to compute
# the dependencies...
src_libdir = $(top_srcdir)/lib
build_libdir = $(top_build_prefix)lib
m4f_dependencies = $(top_build_prefix)bin/autom4te $(AUTOM4TE_CFG)
m4sugar_m4f_dependencies = \
$(m4f_dependencies) \
$(src_libdir)/m4sugar/m4sugar.m4 \
$(build_libdir)/m4sugar/version.m4
m4sh_m4f_dependencies = \
$(m4sugar_m4f_dependencies) \
$(src_libdir)/m4sugar/m4sh.m4
autotest_m4f_dependencies = \
$(m4sh_m4f_dependencies) \
$(src_libdir)/autotest/autotest.m4 \
$(src_libdir)/autotest/general.m4 \
$(src_libdir)/autotest/specific.m4
autoconf_m4f_dependencies = \
$(m4sh_m4f_dependencies) \
$(src_libdir)/autoconf/autoscan.m4 \
$(src_libdir)/autoconf/general.m4 \
$(src_libdir)/autoconf/autoheader.m4 \
$(src_libdir)/autoconf/autoupdate.m4 \
$(src_libdir)/autoconf/autotest.m4 \
$(src_libdir)/autoconf/status.m4 \
$(src_libdir)/autoconf/oldnames.m4 \
$(src_libdir)/autoconf/specific.m4 \
$(src_libdir)/autoconf/lang.m4 \
$(src_libdir)/autoconf/c.m4 \
$(src_libdir)/autoconf/fortran.m4 \
$(src_libdir)/autoconf/erlang.m4 \
$(src_libdir)/autoconf/go.m4 \
$(src_libdir)/autoconf/functions.m4 \
$(src_libdir)/autoconf/headers.m4 \
$(src_libdir)/autoconf/types.m4 \
$(src_libdir)/autoconf/libs.m4 \
$(src_libdir)/autoconf/programs.m4 \
$(src_libdir)/autoconf/autoconf.m4
ETAGS_FOR_M4 = \
--lang=none \
--regex='/\(m4_define\|define\)(\[\([^]]*\)\]/\2/'
ETAGS_FOR_M4SUGAR = \
$(ETAGS_FOR_M4) \
--regex='/m4_defun(\[\([^]]*\)\]/\1/'
ETAGS_FOR_AUTOCONF = \
$(ETAGS_FOR_M4SUGAR) \
--regex='/\(A[CU]_DEFUN\|AU_ALIAS\)(\[\([^]]*\)\]/\2/' \
--regex='/AN_\(FUNCTION\|HEADER\|IDENTIFIER\|LIBRARY\|MAKEVAR\|PROGRAM\)(\[\([^]]*\)\]/\2/'
custom_MAKEINFOFLAGS = --no-headers --no-validate --no-split
@MAKE_CASE_SENSITIVE_TRUE@pkgdata_DATA = $(srcdir)/INSTALL
# Don't leave blank line at end of file.
@MAKE_CASE_SENSITIVE_TRUE@OMIT_TRAILING_EMPTY_LINES = '/^$$/H; /^$$/d; x; s/\n//p; s/\n*//; x'
# Prefer 'plain quotes' over `makeinfo quotes'.
@MAKE_CASE_SENSITIVE_TRUE@CONVERT_QUOTES = "s/\`\([^']*\)'/'\1'/g"
# Generate the ChangeLog from git history.
gen_start_date = 2012-01-15 18:00:00 UTC
# Version string management. There are two files to be aware of:
# .tarball-version - present only in a distribution tarball, and not in
# a checked-out repository. Created with contents that were learned at
# the last time autoconf was run, and used by git-version-gen. Must not
# be present in either $(srcdir) or $(builddir) for git-version-gen to
# give accurate answers during normal development with a checked out tree,
# but must be present in a tarball when there is no version control system.
# Therefore, it cannot be used in any dependencies. GNUmakefile has
# hooks to force a reconfigure at distribution time to get the value
# correct, without penalizing normal development with extra reconfigures.
# .version - present in a checked-out repository and in a distribution
# tarball. At least as current as the most recent .tarball-version
# creation. Usable in dependencies, particularly for files that don't
# want to depend on config.h but do want to track version changes.
BUILT_SOURCES = $(top_srcdir)/.version
bin_SCRIPTS = \
bin/autoconf \
bin/autoheader \
bin/autom4te \
bin/autoreconf \
bin/autoscan \
bin/autoupdate \
bin/ifnames
TAGS_DEPENDENCIES = $(EXTRA_DIST)
letters = abcdefghijklmnopqrstuvwxyz
LETTERS = ABCDEFGHIJKLMNOPQRSTUVWXYZ
DIGITS = 0123456789
WORD_REGEXP = [$(LETTERS)$(letters)_][$(LETTERS)$(letters)$(DIGITS)_]*
ETAGS_PERL = --lang=perl \
bin/autoheader.in \
bin/autoreconf.in \
bin/autoupdate.in \
bin/autoscan.in \
bin/autom4te.in \
bin/ifnames.in
ETAGS_SH = --lang=none --regex='/\($(WORD_REGEXP)\)=/\1/' \
bin/autoconf.in
AM_MAKEINFOFLAGS = --no-split
TEXI2HTML_FLAGS = -split_chapter
TEXINFO_TEX = build-aux/texinfo.tex
info_TEXINFOS = doc/autoconf.texi doc/standards.texi
doc_autoconf_TEXINFOS = doc/fdl.texi doc/install.texi
doc_standards_TEXINFOS = doc/fdl.texi doc/gnu-oids.texi doc/make-stds.texi
TAGS_FILES = $(dist_perllib_DATA) $(dist_autoconflib_DATA) \
$(dist_m4sugarlib_DATA) $(dist_autotestlib_DATA)
forbidden_patterns = -e '^_*EOF' -e ' cmp '
forbidden_patterns_files = $(dist_autoconflib_DATA) \
$(dist_m4sugarlib_DATA) $(dist_autotestlib_DATA)
perllibdir = $(pkgdatadir)/Autom4te
dist_perllib_DATA = \
lib/Autom4te/C4che.pm \
lib/Autom4te/ChannelDefs.pm \
lib/Autom4te/Channels.pm \
lib/Autom4te/Config.pm \
lib/Autom4te/Configure_ac.pm \
lib/Autom4te/FileUtils.pm \
lib/Autom4te/General.pm \
lib/Autom4te/Getopt.pm \
lib/Autom4te/Request.pm \
lib/Autom4te/XFile.pm
# Note: ETAGS_ARGS should have already been extended to handle perl files.
nodist_pkgdata_DATA = lib/autom4te.cfg
dist_lisp_LISP = lib/emacs/autoconf-mode.el lib/emacs/autotest-mode.el
autoconflibdir = $(pkgdatadir)/autoconf
dist_autoconflib_DATA = \
lib/autoconf/autoconf.m4 \
lib/autoconf/general.m4 \
lib/autoconf/status.m4 \
lib/autoconf/oldnames.m4 \
lib/autoconf/specific.m4 \
lib/autoconf/autoheader.m4 \
lib/autoconf/autoupdate.m4 \
lib/autoconf/autotest.m4 \
lib/autoconf/autoscan.m4 \
lib/autoconf/lang.m4 \
lib/autoconf/c.m4 \
lib/autoconf/erlang.m4 \
lib/autoconf/fortran.m4 \
lib/autoconf/functions.m4 \
lib/autoconf/go.m4 \
lib/autoconf/headers.m4 \
lib/autoconf/types.m4 \
lib/autoconf/libs.m4 \
lib/autoconf/programs.m4 \
lib/autoconf/trailer.m4
nodist_autoconflib_DATA = lib/autoconf/autoconf.m4f
autoscanlibdir = $(pkgdatadir)/autoscan
nodist_autoscanlib_DATA = lib/autoscan/autoscan.list
m4sugarlibdir = $(pkgdatadir)/m4sugar
dist_m4sugarlib_DATA = \
lib/m4sugar/m4sugar.m4 \
lib/m4sugar/foreach.m4 \
lib/m4sugar/m4sh.m4
nodist_m4sugarlib_DATA = \
lib/m4sugar/version.m4 \
lib/m4sugar/m4sugar.m4f \
lib/m4sugar/m4sh.m4f
autotestlibdir = $(pkgdatadir)/autotest
dist_autotestlib_DATA = \
lib/autotest/autotest.m4 \
lib/autotest/general.m4 \
lib/autotest/specific.m4
nodist_autotestlib_DATA = lib/autotest/autotest.m4f
# These are declared as _DATA so that they are not subject to
# --program-transform-name; $(pkgdatadir) is sufficient to keep
# multiple installations separate, and autoreconf looks for them by
# their unadorned names. However, autoreconf copies the executable
# bit when it copies these files into a source tree, and _DATA items
# are installed as not-executable, so we have to make them executable
# in a hook rule.
AUXSCRIPTS = \
build-aux/config.guess \
build-aux/config.sub \
build-aux/install-sh
buildauxdir = $(pkgdatadir)/build-aux
dist_buildaux_DATA = \
$(AUXSCRIPTS)
dist_man_MANS = \
man/autoconf.1 \
man/autoheader.1 \
man/autom4te.1 \
man/autoreconf.1 \
man/autoscan.1 \
man/autoupdate.1 \
man/ifnames.1
# Each manpage depends on:
# - its .w and .x files and its source script in bin/
# - common.x for the SEE ALSO list
# - lib/Autom4te/ChannelDefs.pm which contains additional --help text
# (not included in _all_ the manpages, but it's easier to have them
# all depend on it)
# - .version and configure.ac for version information
#
# We ship the manpages in tarball releases so people can build from
# them without having help2man installed. For this to work correctly,
# the manpages cannot have declared dependencies on any file that is
# not also shipped in the tarball. To avoid concurrency bugs, those
# files plus the Makefile must in fact be sufficient to generate the
# manpages. See the automake manual, section 'Errors with distclean',
# for further discussion.
binsrcdir = $(top_srcdir)/bin
channeldefs_pm = lib/Autom4te/ChannelDefs.pm
man_common_dep = $(top_srcdir)/man/common.x \
$(top_srcdir)/$(channeldefs_pm) \
$(top_srcdir)/.version \
$(top_srcdir)/configure.ac
# To generate the manpages, we use help2man, but we don't have it run
# the built script that corresponds to the manpage. Instead it runs
# the .w file listed above, which is a wrapper around
# build-aux/help-extract.pl, which parses the *source* of the script
# and extracts the help and version text. This means that the built
# script doesn't need to exist to create the manpage. If it did,
# we would have a concurrency bug, since we can't declare a dependency
# on the built script, as discussed above.
# We use a suffix rule describing the manpage as built from its .w file
# so that we can use $(c$${pid}_.out \
2>c$${pid}_.err &2; bad=1; fi; \
done; \
done; rm -f c$${pid}_.???; exit $$bad
doc/$(am__dirstamp):
@$(MKDIR_P) doc
@: > doc/$(am__dirstamp)
$(srcdir)/doc/autoconf.info: doc/autoconf.texi $(srcdir)/doc/version.texi $(doc_autoconf_TEXINFOS)
$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
am__cwd=`pwd` && $(am__cd) $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
-o $@ $(srcdir)/doc/autoconf.texi; \
then \
rc=0; \
$(am__cd) $(srcdir); \
else \
rc=$$?; \
$(am__cd) $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
doc/autoconf.dvi: doc/autoconf.texi $(srcdir)/doc/version.texi $(doc_autoconf_TEXINFOS) doc/$(am__dirstamp)
$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
`test -f 'doc/autoconf.texi' || echo '$(srcdir)/'`doc/autoconf.texi
doc/autoconf.pdf: doc/autoconf.texi $(srcdir)/doc/version.texi $(doc_autoconf_TEXINFOS) doc/$(am__dirstamp)
$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
`test -f 'doc/autoconf.texi' || echo '$(srcdir)/'`doc/autoconf.texi
doc/autoconf.html: doc/autoconf.texi $(srcdir)/doc/version.texi $(doc_autoconf_TEXINFOS) doc/$(am__dirstamp)
$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
-o $(@:.html=.htp) `test -f 'doc/autoconf.texi' || echo '$(srcdir)/'`doc/autoconf.texi; \
then \
rm -rf $@ && mv $(@:.html=.htp) $@; \
else \
rm -rf $(@:.html=.htp); exit 1; \
fi
$(srcdir)/doc/version.texi: $(srcdir)/doc/stamp-vti
$(srcdir)/doc/stamp-vti: doc/autoconf.texi $(top_srcdir)/configure
@test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp)
@(dir=.; test -f ./doc/autoconf.texi || dir=$(srcdir); \
set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/doc/autoconf.texi`; \
echo "@set UPDATED $$1 $$2 $$3"; \
echo "@set UPDATED-MONTH $$2 $$3"; \
echo "@set EDITION $(VERSION)"; \
echo "@set VERSION $(VERSION)") > vti.tmp$$$$ && \
(cmp -s vti.tmp$$$$ $(srcdir)/doc/version.texi \
|| (echo "Updating $(srcdir)/doc/version.texi" && \
cp vti.tmp$$$$ $(srcdir)/doc/version.texi.tmp$$$$ && \
mv $(srcdir)/doc/version.texi.tmp$$$$ $(srcdir)/doc/version.texi)) && \
rm -f vti.tmp$$$$ $(srcdir)/doc/version.texi.$$$$
@cp $(srcdir)/doc/version.texi $@
mostlyclean-vti:
-rm -f vti.tmp* $(srcdir)/doc/version.texi.tmp*
maintainer-clean-vti:
-rm -f $(srcdir)/doc/stamp-vti $(srcdir)/doc/version.texi
$(srcdir)/doc/standards.info: doc/standards.texi $(doc_standards_TEXINFOS)
$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
am__cwd=`pwd` && $(am__cd) $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
-o $@ $(srcdir)/doc/standards.texi; \
then \
rc=0; \
$(am__cd) $(srcdir); \
else \
rc=$$?; \
$(am__cd) $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
doc/standards.dvi: doc/standards.texi $(doc_standards_TEXINFOS) doc/$(am__dirstamp)
$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
`test -f 'doc/standards.texi' || echo '$(srcdir)/'`doc/standards.texi
doc/standards.pdf: doc/standards.texi $(doc_standards_TEXINFOS) doc/$(am__dirstamp)
$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
`test -f 'doc/standards.texi' || echo '$(srcdir)/'`doc/standards.texi
doc/standards.html: doc/standards.texi $(doc_standards_TEXINFOS) doc/$(am__dirstamp)
$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
-o $(@:.html=.htp) `test -f 'doc/standards.texi' || echo '$(srcdir)/'`doc/standards.texi; \
then \
rm -rf $@ && mv $(@:.html=.htp) $@; \
else \
rm -rf $(@:.html=.htp); exit 1; \
fi
.dvi.ps:
$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) $(AM_V_texinfo) -o $@ $<
uninstall-dvi-am:
@$(NORMAL_UNINSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
rm -f "$(DESTDIR)$(dvidir)/$$f"; \
done
uninstall-html-am:
@$(NORMAL_UNINSTALL)
@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
done
uninstall-info-am:
@$(PRE_UNINSTALL)
@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
uninstall-pdf-am:
@$(NORMAL_UNINSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
done
uninstall-ps-am:
@$(NORMAL_UNINSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
rm -f "$(DESTDIR)$(psdir)/$$f"; \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
if test -f $$file; then \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f "$(distdir)/$$relfile" || \
cp -p $$file "$(distdir)/$$relfile"; \
else :; fi; \
done; \
done
mostlyclean-aminfo:
-rm -rf doc/autoconf.t2d doc/autoconf.t2p doc/standards.t2d \
doc/standards.t2p
clean-aminfo:
-test -z "doc/autoconf.dvi doc/autoconf.pdf doc/autoconf.ps doc/autoconf.html \
doc/standards.dvi doc/standards.pdf doc/standards.ps \
doc/standards.html" \
|| rm -rf doc/autoconf.dvi doc/autoconf.pdf doc/autoconf.ps doc/autoconf.html \
doc/standards.dvi doc/standards.pdf doc/standards.ps \
doc/standards.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
.el.elc:
if test '$(EMACS)' != no; then \
am__dir=. am__subdir_includes=''; \
case $@ in */*) \
am__dir=`echo '$@' | sed 's,/[^/]*$$,,'`; \
am__subdir_includes="-L $$am__dir -L $(srcdir)/$$am__dir"; \
esac; \
test -d "$$am__dir" || $(MKDIR_P) "$$am__dir" || exit 1; \
$(EMACS) --batch \
$(AM_ELCFLAGS) $(ELCFLAGS) \
$$am__subdir_includes -L $(builddir) -L $(srcdir) \
--eval '$(am__emacs_byte_compile_setup)' \
-f batch-byte-compile '$<'; \
else :; fi
install-dist_lispLISP: $(dist_lisp_LISP) $(ELCFILES)
@$(NORMAL_INSTALL)
@if test "$(EMACS)" != no && test -n "$(lispdir)"; then \
list='$(dist_lisp_LISP)'; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(lispdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(lispdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
echo " $(dist_lispLISP_INSTALL) '$$d$$p' '$(DESTDIR)$(lispdir)/$$f'"; \
$(dist_lispLISP_INSTALL) "$$d$$p" "$(DESTDIR)$(lispdir)/$$f" || exit $$?; \
if test -f $${p}c; then \
echo " $(dist_lispLISP_INSTALL) '$${p}c' '$(DESTDIR)$(lispdir)/$${f}c'"; \
$(dist_lispLISP_INSTALL) "$${p}c" "$(DESTDIR)$(lispdir)/$${f}c" || exit $$?; \
else : ; fi; \
done; \
else : ; fi
uninstall-dist_lispLISP:
@$(NORMAL_UNINSTALL)
@test "$(EMACS)" != no && test -n "$(lispdir)" || exit 0; \
list='$(dist_lisp_LISP)'; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
files="$$files "`echo "$$files" | sed 's|$$|c|'`; \
dir='$(DESTDIR)$(lispdir)'; $(am__uninstall_files_from_dir)
clean-lisp:
-rm -f $(ELCFILES)
install-man1: $(dist_man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
list2='$(dist_man_MANS)'; \
test -n "$(man1dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.1[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
done; }
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man1dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.1[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-dist_autoconflibDATA: $(dist_autoconflib_DATA)
@$(NORMAL_INSTALL)
@list='$(dist_autoconflib_DATA)'; test -n "$(autoconflibdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(autoconflibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(autoconflibdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autoconflibdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(autoconflibdir)" || exit $$?; \
done
uninstall-dist_autoconflibDATA:
@$(NORMAL_UNINSTALL)
@list='$(dist_autoconflib_DATA)'; test -n "$(autoconflibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(autoconflibdir)'; $(am__uninstall_files_from_dir)
install-dist_autotestlibDATA: $(dist_autotestlib_DATA)
@$(NORMAL_INSTALL)
@list='$(dist_autotestlib_DATA)'; test -n "$(autotestlibdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(autotestlibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(autotestlibdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autotestlibdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(autotestlibdir)" || exit $$?; \
done
uninstall-dist_autotestlibDATA:
@$(NORMAL_UNINSTALL)
@list='$(dist_autotestlib_DATA)'; test -n "$(autotestlibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(autotestlibdir)'; $(am__uninstall_files_from_dir)
install-dist_buildauxDATA: $(dist_buildaux_DATA)
@$(NORMAL_INSTALL)
@list='$(dist_buildaux_DATA)'; test -n "$(buildauxdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(buildauxdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(buildauxdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(buildauxdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(buildauxdir)" || exit $$?; \
done
uninstall-dist_buildauxDATA:
@$(NORMAL_UNINSTALL)
@list='$(dist_buildaux_DATA)'; test -n "$(buildauxdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(buildauxdir)'; $(am__uninstall_files_from_dir)
install-dist_m4sugarlibDATA: $(dist_m4sugarlib_DATA)
@$(NORMAL_INSTALL)
@list='$(dist_m4sugarlib_DATA)'; test -n "$(m4sugarlibdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(m4sugarlibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(m4sugarlibdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(m4sugarlibdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(m4sugarlibdir)" || exit $$?; \
done
uninstall-dist_m4sugarlibDATA:
@$(NORMAL_UNINSTALL)
@list='$(dist_m4sugarlib_DATA)'; test -n "$(m4sugarlibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(m4sugarlibdir)'; $(am__uninstall_files_from_dir)
install-dist_perllibDATA: $(dist_perllib_DATA)
@$(NORMAL_INSTALL)
@list='$(dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(perllibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(perllibdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(perllibdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(perllibdir)" || exit $$?; \
done
uninstall-dist_perllibDATA:
@$(NORMAL_UNINSTALL)
@list='$(dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(perllibdir)'; $(am__uninstall_files_from_dir)
install-nodist_autoconflibDATA: $(nodist_autoconflib_DATA)
@$(NORMAL_INSTALL)
@list='$(nodist_autoconflib_DATA)'; test -n "$(autoconflibdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(autoconflibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(autoconflibdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autoconflibdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(autoconflibdir)" || exit $$?; \
done
uninstall-nodist_autoconflibDATA:
@$(NORMAL_UNINSTALL)
@list='$(nodist_autoconflib_DATA)'; test -n "$(autoconflibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(autoconflibdir)'; $(am__uninstall_files_from_dir)
install-nodist_autoscanlibDATA: $(nodist_autoscanlib_DATA)
@$(NORMAL_INSTALL)
@list='$(nodist_autoscanlib_DATA)'; test -n "$(autoscanlibdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(autoscanlibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(autoscanlibdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autoscanlibdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(autoscanlibdir)" || exit $$?; \
done
uninstall-nodist_autoscanlibDATA:
@$(NORMAL_UNINSTALL)
@list='$(nodist_autoscanlib_DATA)'; test -n "$(autoscanlibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(autoscanlibdir)'; $(am__uninstall_files_from_dir)
install-nodist_autotestlibDATA: $(nodist_autotestlib_DATA)
@$(NORMAL_INSTALL)
@list='$(nodist_autotestlib_DATA)'; test -n "$(autotestlibdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(autotestlibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(autotestlibdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autotestlibdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(autotestlibdir)" || exit $$?; \
done
uninstall-nodist_autotestlibDATA:
@$(NORMAL_UNINSTALL)
@list='$(nodist_autotestlib_DATA)'; test -n "$(autotestlibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(autotestlibdir)'; $(am__uninstall_files_from_dir)
install-nodist_m4sugarlibDATA: $(nodist_m4sugarlib_DATA)
@$(NORMAL_INSTALL)
@list='$(nodist_m4sugarlib_DATA)'; test -n "$(m4sugarlibdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(m4sugarlibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(m4sugarlibdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(m4sugarlibdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(m4sugarlibdir)" || exit $$?; \
done
uninstall-nodist_m4sugarlibDATA:
@$(NORMAL_UNINSTALL)
@list='$(nodist_m4sugarlib_DATA)'; test -n "$(m4sugarlibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(m4sugarlibdir)'; $(am__uninstall_files_from_dir)
install-nodist_pkgdataDATA: $(nodist_pkgdata_DATA)
@$(NORMAL_INSTALL)
@list='$(nodist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
done
uninstall-nodist_pkgdataDATA:
@$(NORMAL_UNINSTALL)
@list='$(nodist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-pkgdataDATA: $(pkgdata_DATA)
@$(NORMAL_INSTALL)
@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
done
uninstall-pkgdataDATA:
@$(NORMAL_UNINSTALL)
@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-info dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-zstd: distdir
tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
*.tar.zst*) \
zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-local
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(INFO_DEPS) $(SCRIPTS) $(LISP) $(ELCFILES) $(MANS) \
$(DATA)
installdirs:
for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(lispdir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(autoconflibdir)" "$(DESTDIR)$(autotestlibdir)" "$(DESTDIR)$(buildauxdir)" "$(DESTDIR)$(m4sugarlibdir)" "$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(autoconflibdir)" "$(DESTDIR)$(autoscanlibdir)" "$(DESTDIR)$(autotestlibdir)" "$(DESTDIR)$(m4sugarlibdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(pkgdatadir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-rm -f doc/$(am__dirstamp)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am
clean-am: clean-aminfo clean-generic clean-lisp clean-local \
mostlyclean-am
distclean: distclean-am
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local \
distclean-tags
dvi: dvi-am
dvi-am: $(DVIS)
html: html-am
html-am: $(HTMLS)
info: info-am
info-am: $(INFO_DEPS)
install-data-am: install-dist_autoconflibDATA \
install-dist_autotestlibDATA install-dist_buildauxDATA \
install-dist_lispLISP install-dist_m4sugarlibDATA \
install-dist_perllibDATA install-info-am install-man \
install-nodist_autoconflibDATA install-nodist_autoscanlibDATA \
install-nodist_autotestlibDATA install-nodist_m4sugarlibDATA \
install-nodist_pkgdataDATA install-pkgdataDATA
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-am
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
$(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
done
install-exec-am: install-binSCRIPTS
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
d2=$$d$$p; \
if test -d "$$d2"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d2"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
$(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
fi; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
echo "$$ifile"; \
else : ; fi; \
done; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
@if $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man: install-man1
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am: installcheck-binSCRIPTS installcheck-local
maintainer-clean: maintainer-clean-am
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
pdf: pdf-am
pdf-am: $(PDFS)
ps: ps-am
ps-am: $(PSS)
uninstall-am: uninstall-binSCRIPTS uninstall-dist_autoconflibDATA \
uninstall-dist_autotestlibDATA uninstall-dist_buildauxDATA \
uninstall-dist_lispLISP uninstall-dist_m4sugarlibDATA \
uninstall-dist_perllibDATA uninstall-dvi-am uninstall-html-am \
uninstall-info-am uninstall-man \
uninstall-nodist_autoconflibDATA \
uninstall-nodist_autoscanlibDATA \
uninstall-nodist_autotestlibDATA \
uninstall-nodist_m4sugarlibDATA uninstall-nodist_pkgdataDATA \
uninstall-pdf-am uninstall-pkgdataDATA uninstall-ps-am
uninstall-man: uninstall-man1
.MAKE: all check check-am install install-am install-data-am \
install-exec install-strip
.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am \
check-local clean clean-aminfo clean-cscope clean-generic \
clean-lisp clean-local cscope cscopelist-am ctags ctags-am \
dist dist-all dist-bzip2 dist-gzip dist-hook dist-info \
dist-lzip dist-shar dist-tarZ dist-xz dist-zip dist-zstd \
distcheck distclean distclean-generic distclean-local \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-binSCRIPTS install-data install-data-am \
install-data-hook install-dist_autoconflibDATA \
install-dist_autotestlibDATA install-dist_buildauxDATA \
install-dist_lispLISP install-dist_m4sugarlibDATA \
install-dist_perllibDATA install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-man1 \
install-nodist_autoconflibDATA install-nodist_autoscanlibDATA \
install-nodist_autotestlibDATA install-nodist_m4sugarlibDATA \
install-nodist_pkgdataDATA install-pdf install-pdf-am \
install-pkgdataDATA install-ps install-ps-am install-strip \
installcheck installcheck-am installcheck-binSCRIPTS \
installcheck-local installdirs maintainer-clean \
maintainer-clean-aminfo maintainer-clean-generic \
maintainer-clean-vti mostlyclean mostlyclean-aminfo \
mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am tags \
tags-am uninstall uninstall-am uninstall-binSCRIPTS \
uninstall-dist_autoconflibDATA uninstall-dist_autotestlibDATA \
uninstall-dist_buildauxDATA uninstall-dist_lispLISP \
uninstall-dist_m4sugarlibDATA uninstall-dist_perllibDATA \
uninstall-dvi-am uninstall-html-am uninstall-info-am \
uninstall-man uninstall-man1 uninstall-nodist_autoconflibDATA \
uninstall-nodist_autoscanlibDATA \
uninstall-nodist_autotestlibDATA \
uninstall-nodist_m4sugarlibDATA uninstall-nodist_pkgdataDATA \
uninstall-pdf-am uninstall-pkgdataDATA uninstall-ps-am
.PRECIOUS: Makefile
# When processing the file with diversion disabled, there must be no
# output but comments and empty lines.
# If freezing produces output, something went wrong: a bad `divert',
# or an improper paren etc.
# It may happen that the output does not end with an end of line, hence
# force an end of line when reporting errors.
.m4.m4f:
$(MKDIR_P) $(@D)
lang=`echo '$*' | sed 's,.*/,,'` \
&& if test $$lang = autoconf; then \
lang=autoconf-without-aclocal-m4; \
else :; fi \
&& $(MY_AUTOM4TE) \
--language=$$lang \
--freeze \
--output=$@
check-forbidden-patterns:
@if (cd $(srcdir) && \
$(GREP) $(forbidden_patterns) $(forbidden_patterns_files)) \
>forbidden.log; then \
echo "ERROR: forbidden patterns were found:" >&2; \
sed "s|^|$*.m4: |" &2; \
echo >&2; \
exit 1; \
else \
rm -f forbidden.log; \
fi
@MAKE_CASE_SENSITIVE_TRUE@$(srcdir)/INSTALL: $(top_srcdir)/doc/install.texi
@MAKE_CASE_SENSITIVE_TRUE@ echo @firstparagraphindent insert \
@MAKE_CASE_SENSITIVE_TRUE@ | cat - $(top_srcdir)/doc/install.texi > tmp.texi
@MAKE_CASE_SENSITIVE_TRUE@ $(MAKEINFO) $(custom_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
@MAKE_CASE_SENSITIVE_TRUE@ --plaintext tmp.texi \
@MAKE_CASE_SENSITIVE_TRUE@ | sed -e $(CONVERT_QUOTES) -e $(OMIT_TRAILING_EMPTY_LINES) \
@MAKE_CASE_SENSITIVE_TRUE@ > $@-t && mv $@-t $@
@MAKE_CASE_SENSITIVE_TRUE@ rm -f tmp.texi
.PHONY: gen-ChangeLog
gen-ChangeLog:
if test -d $(top_srcdir)/.git; then \
$(top_srcdir)/build-aux/gitlog-to-changelog \
--since='$(gen_start_date)' > $(distdir)/cl-t \
&& rm -f $(distdir)/ChangeLog \
&& mv $(distdir)/cl-t $(distdir)/ChangeLog; \
fi
# Dummy rule, to pacify automake "gnu" strictness and allow a clean
# bootstrap. Creates a dummy ChangeLog (unless one is already present,
# as might be the case for users of vc-dwim) that will be overridden
# with a proper one at distribution time.
ChangeLog:
@echo dummy > $@
$(top_srcdir)/.version:
echo $(VERSION) > $@-t && mv $@-t $@
# Arrange so that .tarball-version appears only in distribution tarballs,
# never in a checked-out repository.
dist-hook: gen-ChangeLog
echo $(VERSION) > $(distdir)/.tarball-version
# Arrange to remove the symlink to GNUmakefile in VPATH builds.
# TODO remove this once automake vs. AC_CONFIG_LINKS issue is fixed.
# Delete ChangeLog if it is the dummy created by the rule above.
# The sed construct below distinguishes between a file whose sole
# contents are "dummy", and a file whose first line is "dummy" but then
# has other stuff, without reading the whole thing.
distclean-local:
if test x"$(VPATH)" != x ; then rm -f GNUmakefile ; fi
if test "x`sed -ne 'l;2q' ChangeLog 2> /dev/null`" = 'xdummy$$'; \
then rm -f ChangeLog; fi
# autoconf is written in M4sh.
# FIXME: this target should depend on the frozen files below lib/m4sugar,
# otherwise autom4te may pick up a frozen m4sh.m4f from an earlier
# installation below the same $(prefix); work around this with --melt.
bin/autoconf.in: $(srcdir)/bin/autoconf.as $(m4sh_m4f_dependencies)
$(MY_AUTOM4TE) --language M4sh --cache '' \
--melt $(srcdir)/bin/autoconf.as -o $@
$(bin_SCRIPTS): Makefile
rm -f $@ $@.tmp
$(MKDIR_P) $(@D)
srcdir=''; \
test -f ./$@.in || srcdir=$(srcdir)/; \
$(edit) $${srcdir}$@.in >$@.tmp
chmod +x $@.tmp
chmod a-w $@.tmp
mv $@.tmp $@
bin/autoconf: bin/autoconf.in
bin/autoheader: $(srcdir)/bin/autoheader.in
bin/autom4te: $(srcdir)/bin/autom4te.in
bin/autoreconf: $(srcdir)/bin/autoreconf.in
bin/autoscan: $(srcdir)/bin/autoscan.in
bin/autoupdate: $(srcdir)/bin/autoupdate.in
bin/ifnames: $(srcdir)/bin/ifnames.in
# Additional checks.
check-local: check-forbidden-patterns
lib/autom4te.cfg: $(srcdir)/lib/autom4te.in Makefile
rm -f $@ $@-t
$(MKDIR_P) $(@D)
$(edit) $(srcdir)/lib/autom4te.in >$@-t
chmod a-w $@-t
mv -f $@-t $@
lib/autoconf/autoconf.m4f: $(autoconf_m4f_dependencies)
lib/autoscan/autoscan.list: $(srcdir)/lib/autoscan/autoscan.pre
$(MKDIR_P) $(@D)
echo '# Automatically Generated: do not edit this file' >$@
sed '/^[#]/!q' $(srcdir)/lib/autoscan/autoscan.pre >>$@
( \
sed -n '/^[^#]/p' $(srcdir)/lib/autoscan/autoscan.pre; \
$(MY_AUTOM4TE) --cache '' -M -l autoconf-without-aclocal-m4 \
-t'AN_OUTPUT:$$1: $$2 $$3' \
) | LC_ALL=C sort >>$@
lib/autoscan/autoscan.list: $(autoconf_m4f_dependencies) Makefile
# The ':;' in the second line of the recipe works around a redirected
# compound command bash exit status bug.
lib/m4sugar/version.m4: Makefile
$(MKDIR_P) $(@D)
:;{ \
echo '# This file is part of -*- Autoconf -*-.' && \
echo '# Version of Autoconf.' && \
echo '# Copyright (C) 1999, 2000, 2001, 2002, 2006, 2007, 2009' && \
echo '# Free Software Foundation, Inc.' && \
echo &&\
echo 'm4_define([m4_PACKAGE_NAME], [$(PACKAGE_NAME)])' && \
echo 'm4_define([m4_PACKAGE_TARNAME], [$(PACKAGE_TARNAME)])' && \
echo 'm4_define([m4_PACKAGE_VERSION], [$(PACKAGE_VERSION)])' && \
echo 'm4_define([m4_PACKAGE_STRING], [$(PACKAGE_STRING)])' && \
echo 'm4_define([m4_PACKAGE_BUGREPORT], [$(PACKAGE_BUGREPORT)])' && \
echo 'm4_define([m4_PACKAGE_URL], [$(PACKAGE_URL)])' && \
echo 'm4_define([m4_PACKAGE_YEAR], [$(RELEASE_YEAR)])'; \
} > $@-t
mv $@-t $@
lib/m4sugar/m4sugar.m4f: $(m4sugar_m4f_dependencies)
lib/m4sugar/m4sh.m4f: $(m4sh_m4f_dependencies)
lib/autotest/autotest.m4f: $(autotest_m4f_dependencies)
install-data-hook: install-data-hook-make-aux-scripts-executable
install-data-hook-make-aux-scripts-executable:
for s in $(AUXSCRIPTS); do \
chmod +x "$(DESTDIR)$(pkgdatadir)/$$s"; \
done
.PHONY: install-data-hook install-data-hook-make-aux-scripts-executable
man/autoconf.1: $(common_dep) man/autoconf.w man/autoconf.x $(binsrcdir)/autoconf.as
man/autoheader.1: $(common_dep) man/autoheader.w man/autoheader.x $(binsrcdir)/autoheader.in
man/autom4te.1: $(common_dep) man/autom4te.w man/autom4te.x $(binsrcdir)/autom4te.in
man/autoreconf.1: $(common_dep) man/autoreconf.w man/autoreconf.x $(binsrcdir)/autoreconf.in
man/autoscan.1: $(common_dep) man/autoscan.w man/autoscan.x $(binsrcdir)/autoscan.in
man/autoupdate.1: $(common_dep) man/autoupdate.w man/autoupdate.x $(binsrcdir)/autoupdate.in
man/ifnames.1: $(common_dep) man/ifnames.w man/ifnames.x $(binsrcdir)/ifnames.in
.w.1:
@echo "Updating man page $@"
$(MKDIR_P) $(@D)
PATH="$(top_srcdir)/man$(PATH_SEPARATOR)$$PATH"; \
PERL="$(PERL)"; \
PACKAGE_NAME="$(PACKAGE_NAME)"; \
VERSION="$(VERSION)"; \
RELEASE_YEAR="$(RELEASE_YEAR)"; \
top_srcdir="$(top_srcdir)"; \
channeldefs_pm="$(channeldefs_pm)"; \
export PATH PERL PACKAGE_NAME VERSION RELEASE_YEAR; \
export top_srcdir channeldefs_pm; \
$(HELP2MAN) \
--include=$(srcdir)/$*.x \
--include=$(srcdir)/man/common.x \
--source='$(PACKAGE_STRING)' \
--output=$@.t $($@a.t 2>/dev/null && \
$(SED) $(remove_time_stamp) $@.t | cmp $@a.t - >/dev/null 2>&1; then \
touch $@; \
else \
mv $@.t $@; \
fi
rm -f $@.t $@a.t
# To satisfy 'distcleancheck', we need to delete built manpages in
# 'distclean' when the build and source directories are not the same.
# We know we are in this case when 'man/common.x' doesn't exist.
distclean-local: distclean-local-man
distclean-local-man:
test -f man/common.x || rm -f $(dist_man_MANS)
# The ':;' works around a redirected compound command bash exit status bug.
tests/package.m4: Makefile
:;{ \
echo '# Signature of the current package.' && \
echo 'm4_define([AT_PACKAGE_NAME], [$(PACKAGE_NAME)])' && \
echo 'm4_define([AT_PACKAGE_TARNAME], [$(PACKAGE_TARNAME)])' && \
echo 'm4_define([AT_PACKAGE_VERSION], [$(PACKAGE_VERSION)])' && \
echo 'm4_define([AT_PACKAGE_STRING], [$(PACKAGE_STRING)])' && \
echo 'm4_define([AT_PACKAGE_BUGREPORT], [$(PACKAGE_BUGREPORT)])' && \
echo 'm4_define([AT_PACKAGE_URL], [$(PACKAGE_URL)])'; \
} > $@-t
mv $@-t $@
tests/wrapper.in: $(srcdir)/tests/wrapper.as $(m4sh_m4f_dependencies)
$(MY_AUTOM4TE) --language=M4sh $(srcdir)/tests/wrapper.as -o $@
$(wrappers): tests/wrapper.in
rm -f $@ $@.tmp
input=tests/wrapper.in \
&& $(edit_wrapper) tests/wrapper.in >$@.tmp
chmod +x $@.tmp
chmod a-w $@.tmp
mv -f $@.tmp $@
$(TESTSUITE): tests/package.m4 \
tests/local.at \
$(TESTSUITE_AT) \
lib/autotest/autotest.m4f
$(AUTOTEST) $(AUTOTESTFLAGS) suite.at -o $@.tmp
mv $@.tmp $@
$(distclean_generic): clean-local
clean-local:
test ! -f $(TESTSUITE) || $(run_testsuite) --clean
rm -f *.tmp
rm -f -r autom4te.cache
check-local: tests/atconfig tests/atlocal $(TESTSUITE)
+$(run_testsuite) $(TESTSUITEFLAGS)
# Automake doesn't know how to regenerate this file because
# it's created via AC_CONFIG_COMMANDS.
tests/atconfig: $(top_builddir)/config.status
cd $(top_builddir) && $(SHELL) ./config.status $@
# Run the test suite on the *installed* tree.
installcheck-local: tests/atconfig tests/atlocal $(TESTSUITE)
+$(run_testsuite) AUTOTEST_PATH="$(bindir)" $(TESTSUITEFLAGS)
$(TESTSUITE_GENERATED_AT): tests/mktests.stamp
@if test -f $@; then :; else \
rm -f tests/mktests.stamp; \
$(MAKE) $(AM_MAKEFLAGS) tests/mktests.stamp; \
fi
tests/mktests.stamp : tests/mktests.pl $(AUTOCONF_FILES)
@rm -f tests/mktests.tmp
@touch tests/mktests.tmp
$(PERL) $(srcdir)/tests/mktests.pl tests $(AUTOCONF_FILES)
@mv -f tests/mktests.tmp $@
# The test suite cannot be run in parallel with itself.
maintainer-check:
$(MAKE) $(AM_MAKEFLAGS) check
$(MAKE) $(AM_MAKEFLAGS) maintainer-check-posix
expr:
:;{ \
echo '#! $(SHELL)'; \
echo 'result=`$(EXPR) "$$@"`'; \
echo 'estatus=$$?'; \
echo 'cat < $@-t
chmod +x $@-t
mv $@-t $@
# Try the test suite with more severe environments.
maintainer-check-posix: expr
POSIXLY_CORRECT=yes $(MAKE) $(AM_MAKEFLAGS) check
rm expr
check-coverage-run: all
$(MKDIR_P) $(PERL_COVERAGE_DB)
PERL5OPT="$(PERL_COVERAGE_FLAGS)"; export PERL5OPT; \
$(MAKE) $(AM_MAKEFLAGS) check
check-coverage-report:
@if test ! -d $(PERL_COVERAGE_DB); then \
echo "No coverage database found in '$(PERL_COVERAGE_DB)'." >&2; \
echo "Please run '$(MAKE) check-coverage' first" >&2; \
exit 1; \
fi
$(PERL_COVER) $(PERL_COVERAGE_DB) $(PERL_COVER_FLAGS)
# We don't use direct dependencies here because we'd like to be able
# to invoke the report even after interrupted check-coverage.
check-coverage: check-coverage-run
$(MAKE) $(AM_MAKEFLAGS) check-coverage-report
clean-local: clean-coverage
clean-coverage:
rm -rf $(PERL_COVERAGE_DB)
.PHONY: check-coverage check-coverage-run check-coverage-report clean-coverage
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: