/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) Marvell International Ltd. and its affiliates */ #ifndef _MV_DDR_PLAT_H #define _MV_DDR_PLAT_H #include #define MAX_DEVICE_NUM 1 #define MAX_INTERFACE_NUM 1 #define MAX_BUS_NUM 5 #define DDR_IF_CTRL_SUBPHYS_NUM 3 #define DFS_LOW_FREQ_VALUE 120 #define SDRAM_CS_SIZE 0xfffffff /* FIXME: implement a function for cs size for each platform */ #define INTER_REGS_BASE SOC_REGS_PHY_BASE #define AP_INT_REG_START_ADDR 0xd0000000 #define AP_INT_REG_END_ADDR 0xd0100000 /* Controler bus divider 1 for 32 bit, 2 for 64 bit */ #define DDR_CONTROLLER_BUS_WIDTH_MULTIPLIER 1 /* Tune internal training params values */ #define TUNE_TRAINING_PARAMS_CK_DELAY 160 #define TUNE_TRAINING_PARAMS_PHYREG3VAL 0xA #define TUNE_TRAINING_PARAMS_PRI_DATA 123 #define TUNE_TRAINING_PARAMS_NRI_DATA 123 #define TUNE_TRAINING_PARAMS_PRI_CTRL 74 #define TUNE_TRAINING_PARAMS_NRI_CTRL 74 #define TUNE_TRAINING_PARAMS_P_ODT_DATA 45 #define TUNE_TRAINING_PARAMS_N_ODT_DATA 45 #define TUNE_TRAINING_PARAMS_P_ODT_CTRL 45 #define TUNE_TRAINING_PARAMS_N_ODT_CTRL 45 #define TUNE_TRAINING_PARAMS_DIC 0x2 #define TUNE_TRAINING_PARAMS_ODT_CONFIG_2CS 0x120012 #define TUNE_TRAINING_PARAMS_ODT_CONFIG_1CS 0x10000 #define TUNE_TRAINING_PARAMS_RTT_NOM 0x44 #if defined(CONFIG_DDR4) #define TUNE_TRAINING_PARAMS_P_ODT_DATA_DDR4 0x1A #define TUNE_TRAINING_PARAMS_DIC_DDR4 0x0 #define TUNE_TRAINING_PARAMS_ODT_CONFIG_DDR4 0 /* 0x330012 */ #define TUNE_TRAINING_PARAMS_RTT_NOM_DDR4 0 /* 0x400, RZQ/3 = 0x600 */ #define TUNE_TRAINING_PARAMS_RTT_WR_1CS 0x200 /*RZQ/1 = 0x400*/ #define TUNE_TRAINING_PARAMS_RTT_WR_2CS 0x200 /*RZQ/1 = 0x400*/ #define TUNE_TRAINING_PARAMS_RTT_PARK_1CS 0 #define TUNE_TRAINING_PARAMS_RTT_PARK_2CS 0 #else /* CONFIG_DDR4 */ #define TUNE_TRAINING_PARAMS_RTT_WR_1CS 0x0 /*off*/ #define TUNE_TRAINING_PARAMS_RTT_WR_2CS 0x0 /*off*/ #endif /* CONFIG_DDR4 */ #define MARVELL_BOARD MARVELL_BOARD_ID_BASE #define REG_DEVICE_SAR1_ADDR 0xe4204 #define RST2_CPU_DDR_CLOCK_SELECT_IN_OFFSET 17 #define RST2_CPU_DDR_CLOCK_SELECT_IN_MASK 0x1f #define DEVICE_SAMPLE_AT_RESET2_REG 0x18604 #define DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_OFFSET 0 #define DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_25MHZ 0 #define DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_40MHZ 1 /* DRAM Windows */ #define REG_XBAR_WIN_5_CTRL_ADDR 0x20050 #define REG_XBAR_WIN_5_BASE_ADDR 0x20054 /* DRAM Windows */ #define REG_XBAR_WIN_4_CTRL_ADDR 0x20040 #define REG_XBAR_WIN_4_BASE_ADDR 0x20044 #define REG_XBAR_WIN_4_REMAP_ADDR 0x20048 #define REG_XBAR_WIN_7_REMAP_ADDR 0x20078 #define REG_XBAR_WIN_16_CTRL_ADDR 0x200d0 #define REG_XBAR_WIN_16_BASE_ADDR 0x200d4 #define REG_XBAR_WIN_16_REMAP_ADDR 0x200dc #define REG_XBAR_WIN_19_CTRL_ADDR 0x200e8 #define REG_FASTPATH_WIN_BASE_ADDR(win) (0x20180 + (0x8 * win)) #define REG_FASTPATH_WIN_CTRL_ADDR(win) (0x20184 + (0x8 * win)) #define CPU_CONFIGURATION_REG(id) (0x21800 + (id * 0x100)) #define CPU_MRVL_ID_OFFSET 0x10 #define SAR1_CPU_CORE_MASK 0x00000018 #define SAR1_CPU_CORE_OFFSET 3 /* SatR defined too change topology busWidth and ECC configuration */ #define DDR_SATR_CONFIG_MASK_WIDTH 0x8 #define DDR_SATR_CONFIG_MASK_ECC 0x10 #define DDR_SATR_CONFIG_MASK_ECC_PUP 0x20 #define REG_SAMPLE_RESET_HIGH_ADDR 0x18600 #define MV_BOARD_REFCLK_25MHZ 25000000 #define MV_BOARD_REFCLK MV_BOARD_REFCLK_25MHZ #define MAX_DQ_NUM 40 /* dram line buffer registers */ #define DLB_CTRL_REG 0x1700 #define DLB_EN_OFFS 0 #define DLB_EN_MASK 0x1 #define DLB_EN_ENA 1 #define DLB_EN_DIS 0 #define WR_COALESCE_EN_OFFS 2 #define WR_COALESCE_EN_MASK 0x1 #define WR_COALESCE_EN_ENA 1 #define WR_COALESCE_EN_DIS 0 #define AXI_PREFETCH_EN_OFFS 3 #define AXI_PREFETCH_EN_MASK 0x1 #define AXI_PREFETCH_EN_ENA 1 #define AXI_PREFETCH_EN_DIS 0 #define MBUS_PREFETCH_EN_OFFS 4 #define MBUS_PREFETCH_EN_MASK 0x1 #define MBUS_PREFETCH_EN_ENA 1 #define MBUS_PREFETCH_EN_DIS 0 #define PREFETCH_NXT_LN_SZ_TRIG_OFFS 6 #define PREFETCH_NXT_LN_SZ_TRIG_MASK 0x1 #define PREFETCH_NXT_LN_SZ_TRIG_ENA 1 #define PREFETCH_NXT_LN_SZ_TRIG_DIS 0 #define DLB_BUS_OPT_WT_REG 0x1704 #define DLB_AGING_REG 0x1708 #define DLB_EVICTION_CTRL_REG 0x170c #define DLB_EVICTION_TIMERS_REG 0x1710 #define DLB_USER_CMD_REG 0x1714 #define DLB_WTS_DIFF_CS_REG 0x1770 #define DLB_WTS_DIFF_BG_REG 0x1774 #define DLB_WTS_SAME_BG_REG 0x1778 #define DLB_WTS_CMDS_REG 0x177c #define DLB_WTS_ATTR_PRIO_REG 0x1780 #define DLB_QUEUE_MAP_REG 0x1784 #define DLB_SPLIT_REG 0x1788 /* ck swap control subphy number */ #define CK_SWAP_CTRL_PHY_NUM 2 /* Subphy result control per byte registers */ #define RESULT_CONTROL_BYTE_PUP_0_REG 0x1830 #define RESULT_CONTROL_BYTE_PUP_1_REG 0x1834 #define RESULT_CONTROL_BYTE_PUP_2_REG 0x1838 #define RESULT_CONTROL_BYTE_PUP_3_REG 0x183c #define RESULT_CONTROL_BYTE_PUP_4_REG 0x18b0 /* Subphy result control per bit registers */ #define RESULT_CONTROL_PUP_0_BIT_0_REG 0x18b4 #define RESULT_CONTROL_PUP_0_BIT_1_REG 0x18b8 #define RESULT_CONTROL_PUP_0_BIT_2_REG 0x18bc #define RESULT_CONTROL_PUP_0_BIT_3_REG 0x18c0 #define RESULT_CONTROL_PUP_0_BIT_4_REG 0x18c4 #define RESULT_CONTROL_PUP_0_BIT_5_REG 0x18c8 #define RESULT_CONTROL_PUP_0_BIT_6_REG 0x18cc #define RESULT_CONTROL_PUP_0_BIT_7_REG 0x18f0 #define RESULT_CONTROL_PUP_1_BIT_0_REG 0x18f4 #define RESULT_CONTROL_PUP_1_BIT_1_REG 0x18f8 #define RESULT_CONTROL_PUP_1_BIT_2_REG 0x18fc #define RESULT_CONTROL_PUP_1_BIT_3_REG 0x1930 #define RESULT_CONTROL_PUP_1_BIT_4_REG 0x1934 #define RESULT_CONTROL_PUP_1_BIT_5_REG 0x1938 #define RESULT_CONTROL_PUP_1_BIT_6_REG 0x193c #define RESULT_CONTROL_PUP_1_BIT_7_REG 0x19b0 #define RESULT_CONTROL_PUP_2_BIT_0_REG 0x19b4 #define RESULT_CONTROL_PUP_2_BIT_1_REG 0x19b8 #define RESULT_CONTROL_PUP_2_BIT_2_REG 0x19bc #define RESULT_CONTROL_PUP_2_BIT_3_REG 0x19c0 #define RESULT_CONTROL_PUP_2_BIT_4_REG 0x19c4 #define RESULT_CONTROL_PUP_2_BIT_5_REG 0x19c8 #define RESULT_CONTROL_PUP_2_BIT_6_REG 0x19cc #define RESULT_CONTROL_PUP_2_BIT_7_REG 0x19f0 #define RESULT_CONTROL_PUP_3_BIT_0_REG 0x19f4 #define RESULT_CONTROL_PUP_3_BIT_1_REG 0x19f8 #define RESULT_CONTROL_PUP_3_BIT_2_REG 0x19fc #define RESULT_CONTROL_PUP_3_BIT_3_REG 0x1a30 #define RESULT_CONTROL_PUP_3_BIT_4_REG 0x1a34 #define RESULT_CONTROL_PUP_3_BIT_5_REG 0x1a38 #define RESULT_CONTROL_PUP_3_BIT_6_REG 0x1a3c #define RESULT_CONTROL_PUP_3_BIT_7_REG 0x1ab0 #define RESULT_CONTROL_PUP_4_BIT_0_REG 0x1ab4 #define RESULT_CONTROL_PUP_4_BIT_1_REG 0x1ab8 #define RESULT_CONTROL_PUP_4_BIT_2_REG 0x1abc #define RESULT_CONTROL_PUP_4_BIT_3_REG 0x1ac0 #define RESULT_CONTROL_PUP_4_BIT_4_REG 0x1ac4 #define RESULT_CONTROL_PUP_4_BIT_5_REG 0x1ac8 #define RESULT_CONTROL_PUP_4_BIT_6_REG 0x1acc #define RESULT_CONTROL_PUP_4_BIT_7_REG 0x1af0 /* CPU */ #define REG_BOOTROM_ROUTINE_ADDR 0x182d0 #define REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS 12 /* Matrix enables DRAM modes (bus width/ECC) per boardId */ #define TOPOLOGY_UPDATE_32BIT 0 #define TOPOLOGY_UPDATE_32BIT_ECC 1 #define TOPOLOGY_UPDATE_16BIT 2 #define TOPOLOGY_UPDATE_16BIT_ECC 3 #define TOPOLOGY_UPDATE_16BIT_ECC_PUP3 4 #define TOPOLOGY_UPDATE { \ /* 32Bit, 32bit ECC, 16bit, 16bit ECC PUP4, 16bit ECC PUP3 */ \ {1, 1, 1, 1, 1}, /* RD_NAS_68XX_ID */ \ {1, 1, 1, 1, 1}, /* DB_68XX_ID */ \ {1, 0, 1, 0, 1}, /* RD_AP_68XX_ID */ \ {1, 0, 1, 0, 1}, /* DB_AP_68XX_ID */ \ {1, 0, 1, 0, 1}, /* DB_GP_68XX_ID */ \ {0, 0, 1, 1, 0}, /* DB_BP_6821_ID */ \ {1, 1, 1, 1, 1} /* DB_AMC_6820_ID */ \ }; enum { CPU_1066MHZ_DDR_400MHZ, CPU_RESERVED_DDR_RESERVED0, CPU_667MHZ_DDR_667MHZ, CPU_800MHZ_DDR_800MHZ, CPU_RESERVED_DDR_RESERVED1, CPU_RESERVED_DDR_RESERVED2, CPU_RESERVED_DDR_RESERVED3, LAST_FREQ }; /* struct used for DLB configuration array */ struct dlb_config { u32 reg_addr; u32 reg_data; }; #define ACTIVE_INTERFACE_MASK 0x1 extern u32 dmin_phy_reg_table[][2]; extern u16 odt_slope[]; extern u16 odt_intercept[]; int mv_ddr_pre_training_soc_config(const char *ddr_type); int mv_ddr_post_training_soc_config(const char *ddr_type); void mv_ddr_mem_scrubbing(void); u32 mv_ddr_init_freq_get(void); void mv_ddr_odpg_enable(void); void mv_ddr_odpg_disable(void); void mv_ddr_odpg_done_clr(void); int mv_ddr_is_odpg_done(u32 count); void mv_ddr_training_enable(void); int mv_ddr_is_training_done(u32 count, u32 *result); u32 mv_ddr_dm_pad_get(void); int mv_ddr_pre_training_fixup(void); int mv_ddr_post_training_fixup(void); int mv_ddr_manual_cal_do(void); int ddr3_calc_mem_cs_size(u32 cs, uint64_t *cs_size); #endif /* _MV_DDR_PLAT_H */