# Danish translation xz. # This file is put in the public domain. # Joe Hansen , 2019. # msgid "" msgstr "" "Project-Id-Version: xz 5.2.4\n" "Report-Msgid-Bugs-To: xz@tukaani.org\n" "POT-Creation-Date: 2023-05-04 22:32+0800\n" "PO-Revision-Date: 2019-03-04 23:08+0100\n" "Last-Translator: Joe Hansen \n" "Language-Team: Danish \n" "Language: da\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: src/xz/args.c:77 #, c-format msgid "%s: Invalid argument to --block-list" msgstr "%s: Ugyldigt parameter til --block-list" #: src/xz/args.c:87 #, c-format msgid "%s: Too many arguments to --block-list" msgstr "%s: For mange argumenter til --block-list" #: src/xz/args.c:116 msgid "0 can only be used as the last element in --block-list" msgstr "0 kan kun bruges som det sidste element i --block-list" #: src/xz/args.c:451 #, c-format msgid "%s: Unknown file format type" msgstr "%s: Ukendt filformattype" #: src/xz/args.c:474 src/xz/args.c:482 #, c-format msgid "%s: Unsupported integrity check type" msgstr "%s: Typen for integritetkontrol er ikke understøttet" #: src/xz/args.c:518 msgid "Only one file can be specified with `--files' or `--files0'." msgstr "Kun en fil kan angives med »--files« eller »--files0«." #: src/xz/args.c:586 #, c-format msgid "The environment variable %s contains too many arguments" msgstr "Miljøvariablen %s indeholder for mange argumenter" #: src/xz/args.c:688 msgid "Compression support was disabled at build time" msgstr "Komprimeringsunderstøttelse blev deaktiveret på byggetidspunktet" #: src/xz/args.c:695 msgid "Decompression support was disabled at build time" msgstr "Dekomprimeringsunderstøttelse blev deaktiveret på byggetidspunktet" #: src/xz/args.c:701 msgid "Compression of lzip files (.lz) is not supported" msgstr "" #: src/xz/args.c:732 #, fuzzy #| msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout" msgid "With --format=raw, --suffix=.SUF is required unless writing to stdout" msgstr "%s: med --format=raw, --suffix=.SUF er krævet med mindre der skrives til standardud" #: src/xz/coder.c:115 msgid "Maximum number of filters is four" msgstr "Maksimalt antal filtre er fire" #: src/xz/coder.c:134 msgid "Memory usage limit is too low for the given filter setup." msgstr "Begræsningen for brug af hukommelse er for lav for den givne filteropsætning." #: src/xz/coder.c:169 msgid "Using a preset in raw mode is discouraged." msgstr "Det frarådes at bruge en forhåndskonfiguration i rå tilstand (raw mode)." #: src/xz/coder.c:171 msgid "The exact options of the presets may vary between software versions." msgstr "De præcise indstillinger for forhåndskonfigurationerne kan variere mellem programversioner." #: src/xz/coder.c:194 msgid "The .lzma format supports only the LZMA1 filter" msgstr "Formatet .lzma understøtter kun LZMA1-filteret" #: src/xz/coder.c:202 msgid "LZMA1 cannot be used with the .xz format" msgstr "LZMA1 kan ikke bruges med .xz-formatet" #: src/xz/coder.c:219 msgid "The filter chain is incompatible with --flush-timeout" msgstr "Filterkæden er ikke kompatibel med --flush-timeout" #: src/xz/coder.c:225 msgid "Switching to single-threaded mode due to --flush-timeout" msgstr "Skifter til enkelt trådet tilstand på grund af --flush-timeout" #: src/xz/coder.c:249 #, c-format msgid "Using up to % threads." msgstr "Bruger op til % tråde." #: src/xz/coder.c:265 msgid "Unsupported filter chain or filter options" msgstr "Filterkæde eller filterindstillinger er ikke understøttet" #: src/xz/coder.c:277 #, c-format msgid "Decompression will need %s MiB of memory." msgstr "Dekomprimering vil kræve %s MiB hukommelse." #: src/xz/coder.c:309 #, fuzzy, c-format #| msgid "Adjusted the number of threads from %s to %s to not exceed the memory usage limit of %s MiB" msgid "Reduced the number of threads from %s to %s to not exceed the memory usage limit of %s MiB" msgstr "Justerede antallet af tråde fra %s til %s for ikke at overskride begræsningen på brug af hukommelse på %s MiB" #: src/xz/coder.c:329 #, c-format msgid "Reduced the number of threads from %s to one. The automatic memory usage limit of %s MiB is still being exceeded. %s MiB of memory is required. Continuing anyway." msgstr "" #: src/xz/coder.c:356 #, fuzzy, c-format #| msgid "Adjusted the number of threads from %s to %s to not exceed the memory usage limit of %s MiB" msgid "Switching to single-threaded mode to not exceed the memory usage limit of %s MiB" msgstr "Justerede antallet af tråde fra %s til %s for ikke at overskride begræsningen på brug af hukommelse på %s MiB" #: src/xz/coder.c:411 #, c-format msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB" msgstr "Justerede LZMA%c-ordbogsstørrelsen fra %s MiB til %s MiB for ikke at overskride begrænsningen på brug af hukommelse på %s MiB" #: src/xz/file_io.c:110 src/xz/file_io.c:118 #, c-format msgid "Error creating a pipe: %s" msgstr "Det opstod en fejl under oprettelse af en datakanal: %s" #: src/xz/file_io.c:252 msgid "Failed to enable the sandbox" msgstr "Kunne ikke aktivere sandkassen" #: src/xz/file_io.c:294 #, c-format msgid "%s: poll() failed: %s" msgstr "%s: poll() mislykkedes: %s" #. TRANSLATORS: When compression or decompression finishes, #. and xz is going to remove the source file, xz first checks #. if the source file still exists, and if it does, does its #. device and inode numbers match what xz saw when it opened #. the source file. If these checks fail, this message is #. shown, %s being the filename, and the file is not deleted. #. The check for device and inode numbers is there, because #. it is possible that the user has put a new file in place #. of the original file, and in that case it obviously #. shouldn't be removed. #: src/xz/file_io.c:361 #, c-format msgid "%s: File seems to have been moved, not removing" msgstr "%s: Filen er vist blevet flyttet, sletter ikke" #: src/xz/file_io.c:368 src/xz/file_io.c:924 #, c-format msgid "%s: Cannot remove: %s" msgstr "%s: Kan ikke fjerne: %s" #: src/xz/file_io.c:394 #, c-format msgid "%s: Cannot set the file owner: %s" msgstr "%s: Kan ikke angive filejeren: %s" #: src/xz/file_io.c:407 #, c-format msgid "%s: Cannot set the file group: %s" msgstr "%s: Kan ikke angive filgruppen: %s" #: src/xz/file_io.c:426 #, c-format msgid "%s: Cannot set the file permissions: %s" msgstr "%s: Kan ikke angive filtilladelser: %s" #: src/xz/file_io.c:552 #, c-format msgid "Error getting the file status flags from standard input: %s" msgstr "Der opstod en fejl under indhentelse af filstatusflag fra standardind: %s" #: src/xz/file_io.c:610 src/xz/file_io.c:672 #, c-format msgid "%s: Is a symbolic link, skipping" msgstr "%s: Er en symbolsk henvisning, udelader" #: src/xz/file_io.c:701 #, c-format msgid "%s: Is a directory, skipping" msgstr "%s: Er en mappe, udelader" #: src/xz/file_io.c:707 #, c-format msgid "%s: Not a regular file, skipping" msgstr "%s: Er ikke en normal fil, udelader" #: src/xz/file_io.c:724 #, c-format msgid "%s: File has setuid or setgid bit set, skipping" msgstr "%s: Filen har setuid- eller setgid-bitsæt, udelader" #: src/xz/file_io.c:731 #, c-format msgid "%s: File has sticky bit set, skipping" msgstr "%s: Fil har klæbende bitsæt, udelader" #: src/xz/file_io.c:738 #, c-format msgid "%s: Input file has more than one hard link, skipping" msgstr "%s: Inddatafil har mere end en hård henvisning, udelader" #: src/xz/file_io.c:780 msgid "Empty filename, skipping" msgstr "Tomt filnavn, udelader" #: src/xz/file_io.c:834 #, c-format msgid "Error restoring the status flags to standard input: %s" msgstr "Der opstod en fejl under gendannelse af statusflagene til standardind: %s" #: src/xz/file_io.c:882 #, c-format msgid "Error getting the file status flags from standard output: %s" msgstr "Der opstod en fejl under indhentelse af filstatusflag fra standardud: %s" #: src/xz/file_io.c:1060 #, c-format msgid "Error restoring the O_APPEND flag to standard output: %s" msgstr "Der opstod en fejl under gendannelse af flaget O_APPEND til standardud: %s" #: src/xz/file_io.c:1072 #, c-format msgid "%s: Closing the file failed: %s" msgstr "%s: Lukning af filen fejlede: %s" #: src/xz/file_io.c:1108 src/xz/file_io.c:1371 #, c-format msgid "%s: Seeking failed when trying to create a sparse file: %s" msgstr "%s: Søgning fejlede under forsøg på at oprette en tynd fil: %s" #: src/xz/file_io.c:1209 #, c-format msgid "%s: Read error: %s" msgstr "%s: Læsefejl: %s" #: src/xz/file_io.c:1239 #, c-format msgid "%s: Error seeking the file: %s" msgstr "%s: Der opstod en fejl under søgning efter filen: %s" #: src/xz/file_io.c:1263 #, c-format msgid "%s: Unexpected end of file" msgstr "%s: Uventet filafslutning" #: src/xz/file_io.c:1322 #, c-format msgid "%s: Write error: %s" msgstr "%s: Skrivefejl: %s" #: src/xz/hardware.c:238 msgid "Disabled" msgstr "Deaktiveret" #: src/xz/hardware.c:269 #, fuzzy #| msgid "Total amount of physical memory (RAM): " msgid "Amount of physical memory (RAM):" msgstr "Samlet mængde fysisk hukommelse (RAM): " #: src/xz/hardware.c:270 msgid "Number of processor threads:" msgstr "" #: src/xz/hardware.c:271 msgid "Compression:" msgstr "" #: src/xz/hardware.c:272 msgid "Decompression:" msgstr "" #: src/xz/hardware.c:273 #, fuzzy #| msgid "Memory usage limit for decompression: " msgid "Multi-threaded decompression:" msgstr "Grænse for hukommelsesforbug til dekomprimering: " #: src/xz/hardware.c:274 msgid "Default for -T0:" msgstr "" #: src/xz/hardware.c:292 msgid "Hardware information:" msgstr "" #: src/xz/hardware.c:299 #, fuzzy #| msgid "Memory usage limit reached" msgid "Memory usage limits:" msgstr "Begrænsning på brug af hukommelse er nået" #: src/xz/list.c:68 msgid "Streams:" msgstr "" #: src/xz/list.c:69 msgid "Blocks:" msgstr "" #: src/xz/list.c:70 #, fuzzy #| msgid " Compressed size: %s\n" msgid "Compressed size:" msgstr " Komprimeret str.: %s\n" #: src/xz/list.c:71 #, fuzzy #| msgid " Uncompressed size: %s\n" msgid "Uncompressed size:" msgstr " Ukomprimeret str.: %s\n" #: src/xz/list.c:72 msgid "Ratio:" msgstr "" #: src/xz/list.c:73 msgid "Check:" msgstr "" #: src/xz/list.c:74 #, fuzzy #| msgid " Stream padding: %s\n" msgid "Stream Padding:" msgstr " Strømfyld: %s\n" #: src/xz/list.c:75 #, fuzzy #| msgid " Memory needed: %s MiB\n" msgid "Memory needed:" msgstr " Hukommelse krævet: %s MiB\n" #: src/xz/list.c:76 #, fuzzy #| msgid " Sizes in headers: %s\n" msgid "Sizes in headers:" msgstr " Størrelser i teksthoveder: %s\n" #: src/xz/list.c:79 #, fuzzy #| msgid " Number of files: %s\n" msgid "Number of files:" msgstr " Antal filer: %s\n" #: src/xz/list.c:122 msgid "Stream" msgstr "" #: src/xz/list.c:123 msgid "Block" msgstr "" #: src/xz/list.c:124 msgid "Blocks" msgstr "" #: src/xz/list.c:125 msgid "CompOffset" msgstr "" #: src/xz/list.c:126 msgid "UncompOffset" msgstr "" #: src/xz/list.c:127 msgid "CompSize" msgstr "" #: src/xz/list.c:128 msgid "UncompSize" msgstr "" #: src/xz/list.c:129 #, fuzzy #| msgid "Totals:" msgid "TotalSize" msgstr "I alt:" #: src/xz/list.c:130 msgid "Ratio" msgstr "" #: src/xz/list.c:131 msgid "Check" msgstr "" #: src/xz/list.c:132 msgid "CheckVal" msgstr "" #: src/xz/list.c:133 msgid "Padding" msgstr "" #: src/xz/list.c:134 msgid "Header" msgstr "" #: src/xz/list.c:135 msgid "Flags" msgstr "" #: src/xz/list.c:136 msgid "MemUsage" msgstr "" #: src/xz/list.c:137 msgid "Filters" msgstr "" #. TRANSLATORS: Indicates that there is no integrity check. #. This string is used in tables. In older xz version this #. string was limited to ten columns in a fixed-width font, but #. nowadays there is no strict length restriction anymore. #: src/xz/list.c:169 msgid "None" msgstr "Ingen" #. TRANSLATORS: Indicates that integrity check name is not known, #. but the Check ID is known (here 2). In older xz version these #. strings were limited to ten columns in a fixed-width font, but #. nowadays there is no strict length restriction anymore. #: src/xz/list.c:175 msgid "Unknown-2" msgstr "Ukendt-2" #: src/xz/list.c:176 msgid "Unknown-3" msgstr "Ukendt-3" #: src/xz/list.c:178 msgid "Unknown-5" msgstr "Ukendt-5" #: src/xz/list.c:179 msgid "Unknown-6" msgstr "Ukendt-6" #: src/xz/list.c:180 msgid "Unknown-7" msgstr "Ukendt-7" #: src/xz/list.c:181 msgid "Unknown-8" msgstr "Ukendt-8" #: src/xz/list.c:182 msgid "Unknown-9" msgstr "Ukendt-9" #: src/xz/list.c:184 msgid "Unknown-11" msgstr "Ukendt-11" #: src/xz/list.c:185 msgid "Unknown-12" msgstr "Ukendt-12" #: src/xz/list.c:186 msgid "Unknown-13" msgstr "Ukendt-13" #: src/xz/list.c:187 msgid "Unknown-14" msgstr "Ukendt-14" #: src/xz/list.c:188 msgid "Unknown-15" msgstr "Ukendt-15" #: src/xz/list.c:351 #, c-format msgid "%s: File is empty" msgstr "%s: Filen er tom" #: src/xz/list.c:356 #, c-format msgid "%s: Too small to be a valid .xz file" msgstr "%s: For lille til at være en gyldig .xz-fil" #. TRANSLATORS: These are column headings. From Strms (Streams) #. to Ratio, the columns are right aligned. Check and Filename #. are left aligned. If you need longer words, it's OK to #. use two lines here. Test with "xz -l foo.xz". #: src/xz/list.c:730 msgid "Strms Blocks Compressed Uncompressed Ratio Check Filename" msgstr "" #: src/xz/list.c:1025 src/xz/list.c:1203 msgid "Yes" msgstr "Ja" #: src/xz/list.c:1025 src/xz/list.c:1203 msgid "No" msgstr "Nej" #: src/xz/list.c:1027 src/xz/list.c:1205 #, c-format msgid " Minimum XZ Utils version: %s\n" msgstr " Minimum for XZ Utils-version: %s\n" #. TRANSLATORS: %s is an integer. Only the plural form of this #. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz". #: src/xz/list.c:1178 #, c-format msgid "%s file\n" msgid_plural "%s files\n" msgstr[0] "%s fil\n" msgstr[1] "%s filer\n" #: src/xz/list.c:1191 msgid "Totals:" msgstr "I alt:" #: src/xz/list.c:1269 msgid "--list works only on .xz files (--format=xz or --format=auto)" msgstr "" #: src/xz/list.c:1275 msgid "--list does not support reading from standard input" msgstr "--list understøtter ikke læsning fra standardind" #: src/xz/main.c:89 #, c-format msgid "%s: Error reading filenames: %s" msgstr "%s: Der opstod en fejl under forsøg på læsning af filnavne: %s" #: src/xz/main.c:96 #, c-format msgid "%s: Unexpected end of input when reading filenames" msgstr "%s: Uventet afslutning på inddata under forsøg på læsning af filnavne" #: src/xz/main.c:120 #, c-format msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?" msgstr "" #: src/xz/main.c:188 msgid "Compression and decompression with --robot are not supported yet." msgstr "Komprimering og dekomprimering med --robot er endnu ikke understøttet." #: src/xz/main.c:266 msgid "Cannot read data from standard input when reading filenames from standard input" msgstr "" #. TRANSLATORS: This is the program name in the beginning #. of the line in messages. Usually it becomes "xz: ". #. This is a translatable string because French needs #. a space before a colon. #: src/xz/message.c:725 #, c-format msgid "%s: " msgstr "%s: " #: src/xz/message.c:797 src/xz/message.c:856 msgid "Internal error (bug)" msgstr "Intern fejl (fejl)" #: src/xz/message.c:804 msgid "Cannot establish signal handlers" msgstr "Kan ikke etbalere signalhåndteringer" #: src/xz/message.c:813 msgid "No integrity check; not verifying file integrity" msgstr "Ingen integritetkontrol; verificerer ikke filintegritet" #: src/xz/message.c:816 msgid "Unsupported type of integrity check; not verifying file integrity" msgstr "" #: src/xz/message.c:823 msgid "Memory usage limit reached" msgstr "Begrænsning på brug af hukommelse er nået" #: src/xz/message.c:826 msgid "File format not recognized" msgstr "Filformatet blev ikke genkendt" #: src/xz/message.c:829 msgid "Unsupported options" msgstr "Tilvalg er ikke understøttede" #: src/xz/message.c:832 msgid "Compressed data is corrupt" msgstr "Komprimerede data er ødelagte" #: src/xz/message.c:835 msgid "Unexpected end of input" msgstr "Uventet afslutning på inddata" #: src/xz/message.c:877 #, c-format msgid "%s MiB of memory is required. The limiter is disabled." msgstr "%s MiB hukommelse er krævet. Begrænseren er deaktiveret." #: src/xz/message.c:905 #, c-format msgid "%s MiB of memory is required. The limit is %s." msgstr "%s MiB hukommelse er krævet. Begrænsningen er %s." #: src/xz/message.c:924 #, c-format msgid "%s: Filter chain: %s\n" msgstr "%s: Filterkæde: %s\n" #: src/xz/message.c:935 #, c-format msgid "Try `%s --help' for more information." msgstr "Prøv »%s --help« for yderligere information." #: src/xz/message.c:961 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]...\n" "Compress or decompress FILEs in the .xz format.\n" "\n" msgstr "" #: src/xz/message.c:968 msgid "Mandatory arguments to long options are mandatory for short options too.\n" msgstr "" "Obligatoriske argumenter til lange tilvalg er også obligatoriske for korte\n" "tilvalg.\n" #: src/xz/message.c:972 msgid " Operation mode:\n" msgstr " Operationstilstand:\n" #: src/xz/message.c:975 msgid "" " -z, --compress force compression\n" " -d, --decompress force decompression\n" " -t, --test test compressed file integrity\n" " -l, --list list information about .xz files" msgstr "" #: src/xz/message.c:981 msgid "" "\n" " Operation modifiers:\n" msgstr "" "\n" "Operationsændrere:\n" #: src/xz/message.c:984 msgid "" " -k, --keep keep (don't delete) input files\n" " -f, --force force overwrite of output file and (de)compress links\n" " -c, --stdout write to standard output and don't delete input files" msgstr "" #: src/xz/message.c:993 msgid "" " --single-stream decompress only the first stream, and silently\n" " ignore possible remaining input data" msgstr "" #: src/xz/message.c:996 msgid "" " --no-sparse do not create sparse files when decompressing\n" " -S, --suffix=.SUF use the suffix `.SUF' on compressed files\n" " --files[=FILE] read filenames to process from FILE; if FILE is\n" " omitted, filenames are read from the standard input;\n" " filenames must be terminated with the newline character\n" " --files0[=FILE] like --files but use the null character as terminator" msgstr "" #: src/xz/message.c:1005 msgid "" "\n" " Basic file format and compression options:\n" msgstr "" #: src/xz/message.c:1007 msgid "" " -F, --format=FMT file format to encode or decode; possible values are\n" " `auto' (default), `xz', `lzma', `lzip', and `raw'\n" " -C, --check=CHECK integrity check type: `none' (use with caution),\n" " `crc32', `crc64' (default), or `sha256'" msgstr "" #: src/xz/message.c:1012 msgid " --ignore-check don't verify the integrity check when decompressing" msgstr "" #: src/xz/message.c:1016 msgid "" " -0 ... -9 compression preset; default is 6; take compressor *and*\n" " decompressor memory usage into account before using 7-9!" msgstr "" #: src/xz/message.c:1020 msgid "" " -e, --extreme try to improve compression ratio by using more CPU time;\n" " does not affect decompressor memory requirements" msgstr "" #: src/xz/message.c:1024 msgid "" " -T, --threads=NUM use at most NUM threads; the default is 1; set to 0\n" " to use as many threads as there are processor cores" msgstr "" #: src/xz/message.c:1029 msgid "" " --block-size=SIZE\n" " start a new .xz block after every SIZE bytes of input;\n" " use this to set the block size for threaded compression" msgstr "" #: src/xz/message.c:1033 msgid "" " --block-list=SIZES\n" " start a new .xz block after the given comma-separated\n" " intervals of uncompressed data" msgstr "" #: src/xz/message.c:1037 msgid "" " --flush-timeout=TIMEOUT\n" " when compressing, if more than TIMEOUT milliseconds has\n" " passed since the previous flush and reading more input\n" " would block, all pending data is flushed out" msgstr "" #: src/xz/message.c:1043 #, no-c-format msgid "" " --memlimit-compress=LIMIT\n" " --memlimit-decompress=LIMIT\n" " --memlimit-mt-decompress=LIMIT\n" " -M, --memlimit=LIMIT\n" " set memory usage limit for compression, decompression,\n" " threaded decompression, or all of these; LIMIT is in\n" " bytes, % of RAM, or 0 for defaults" msgstr "" #: src/xz/message.c:1052 msgid "" " --no-adjust if compression settings exceed the memory usage limit,\n" " give an error instead of adjusting the settings downwards" msgstr "" #: src/xz/message.c:1058 msgid "" "\n" " Custom filter chain for compression (alternative for using presets):" msgstr "" #: src/xz/message.c:1067 msgid "" "\n" " --lzma1[=OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n" " --lzma2[=OPTS] more of the following options (valid values; default):\n" " preset=PRE reset options to a preset (0-9[e])\n" " dict=NUM dictionary size (4KiB - 1536MiB; 8MiB)\n" " lc=NUM number of literal context bits (0-4; 3)\n" " lp=NUM number of literal position bits (0-4; 0)\n" " pb=NUM number of position bits (0-4; 2)\n" " mode=MODE compression mode (fast, normal; normal)\n" " nice=NUM nice length of a match (2-273; 64)\n" " mf=NAME match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n" " depth=NUM maximum search depth; 0=automatic (default)" msgstr "" #: src/xz/message.c:1082 msgid "" "\n" " --x86[=OPTS] x86 BCJ filter (32-bit and 64-bit)\n" " --arm[=OPTS] ARM BCJ filter\n" " --armthumb[=OPTS] ARM-Thumb BCJ filter\n" " --arm64[=OPTS] ARM64 BCJ filter\n" " --powerpc[=OPTS] PowerPC BCJ filter (big endian only)\n" " --ia64[=OPTS] IA-64 (Itanium) BCJ filter\n" " --sparc[=OPTS] SPARC BCJ filter\n" " Valid OPTS for all BCJ filters:\n" " start=NUM start offset for conversions (default=0)" msgstr "" #: src/xz/message.c:1095 msgid "" "\n" " --delta[=OPTS] Delta filter; valid OPTS (valid values; default):\n" " dist=NUM distance between bytes being subtracted\n" " from each other (1-256; 1)" msgstr "" #: src/xz/message.c:1103 msgid "" "\n" " Other options:\n" msgstr "" "\n" "Andre tilvalg:\n" #: src/xz/message.c:1106 msgid "" " -q, --quiet suppress warnings; specify twice to suppress errors too\n" " -v, --verbose be verbose; specify twice for even more verbose" msgstr "" #: src/xz/message.c:1111 msgid " -Q, --no-warn make warnings not affect the exit status" msgstr "" #: src/xz/message.c:1113 msgid " --robot use machine-parsable messages (useful for scripts)" msgstr "" " --robot brug beskeder der kan fortolkes maskinelt (nyttigt\n" " for skripter)" #: src/xz/message.c:1116 msgid "" " --info-memory display the total amount of RAM and the currently active\n" " memory usage limits, and exit" msgstr "" #: src/xz/message.c:1119 msgid "" " -h, --help display the short help (lists only the basic options)\n" " -H, --long-help display this long help and exit" msgstr "" " -h, --help vis den korte hjælpetekst (viser kun grundlæggende\n" " tilvalg)\n" " -H, --long-help vis den lange hjælpetekst og afslut" #: src/xz/message.c:1123 msgid "" " -h, --help display this short help and exit\n" " -H, --long-help display the long help (lists also the advanced options)" msgstr "" " -h, --help vis den korte hjælpetekst og afslut\n" " -H, --long-help vis den lange hjælpetekst (viser også de avancerede\n" " tilvalg)" #: src/xz/message.c:1128 msgid " -V, --version display the version number and exit" msgstr " -V, --version vis versionsnummer og afslut" #: src/xz/message.c:1130 msgid "" "\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" "\n" "Med ingen FIL, eller når FIL er -, læs standardind.\n" #. TRANSLATORS: This message indicates the bug reporting address #. for this package. Please add _another line_ saying #. "Report translation bugs to <...>\n" with the email or WWW #. address for translation bugs. Thanks. #: src/xz/message.c:1136 #, c-format msgid "Report bugs to <%s> (in English or Finnish).\n" msgstr "" "Rapporter fejl til <%s> (på engelsk eller finsk).\n" "Rapporter oversættelsesfejl til .\n" #: src/xz/message.c:1138 #, c-format msgid "%s home page: <%s>\n" msgstr "%s hjemmeside: <%s>\n" #: src/xz/message.c:1142 msgid "THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE." msgstr "DETTE ER EN UDVIKLINGSVERSION - BRUG IKKE I PRODUKTION." #: src/xz/options.c:86 #, c-format msgid "%s: Options must be `name=value' pairs separated with commas" msgstr "%s: Tilvalg skal være »navne=værdi«-par adskilt med kommaer" #: src/xz/options.c:93 #, c-format msgid "%s: Invalid option name" msgstr "%s: Ugyldigt tilvalgsnavn" #: src/xz/options.c:113 #, c-format msgid "%s: Invalid option value" msgstr "%s: Ugyldigt tilvalgsværdi" #: src/xz/options.c:247 #, c-format msgid "Unsupported LZMA1/LZMA2 preset: %s" msgstr "LZMA1/LZMA2-forhåndskonfiguration er ikke understøttet: %s" #: src/xz/options.c:355 msgid "The sum of lc and lp must not exceed 4" msgstr "Summen af lc og lp må ikke være højere end 4" #: src/xz/suffix.c:160 #, c-format msgid "%s: Filename has an unknown suffix, skipping" msgstr "%s: Filnavn har ukendt endelse, udelader" #: src/xz/suffix.c:181 #, c-format msgid "%s: File already has `%s' suffix, skipping" msgstr "%s: Filen har allrede endelsen »%s«, udelader." #: src/xz/suffix.c:388 #, c-format msgid "%s: Invalid filename suffix" msgstr "%s: Ugyldig filnavnendelse" #: src/xz/util.c:71 #, c-format msgid "%s: Value is not a non-negative decimal integer" msgstr "%s: Værdi er ikke et positivt decimalheltal" #: src/xz/util.c:113 #, c-format msgid "%s: Invalid multiplier suffix" msgstr "%s: Ugyldig multiplikatorendelse" #: src/xz/util.c:115 msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)." msgstr "Gyldige endelser er »KiB« (2^10), »MiB« (2^20) og »GiB« (2^30)." #: src/xz/util.c:132 #, c-format msgid "Value of the option `%s' must be in the range [%, %]" msgstr "Værdien for tilvalget »%s« skal være i intervallet [%, %]" #: src/xz/util.c:269 msgid "Compressed data cannot be read from a terminal" msgstr "Komprimerede data kan ikke læses fra en terminal" #: src/xz/util.c:282 msgid "Compressed data cannot be written to a terminal" msgstr "Komprimerede data kan ikke skrives til en terminal" #: src/common/tuklib_exit.c:40 msgid "Writing to standard output failed" msgstr "Skrivning til standardud mislykkedes" #: src/common/tuklib_exit.c:43 msgid "Unknown error" msgstr "Ukendt fejl" #~ msgid "Sandbox is disabled due to incompatible command line arguments" #~ msgstr "Sandkassen er deaktiveret på grund af inkompatible kommandolinjeargumenter" #~ msgid "Sandbox was successfully enabled" #~ msgstr "Sandkassen blev aktiveret" #~ msgid "Memory usage limit for compression: " #~ msgstr "Grænse for hukommelsesforbrug til komprimering: " #, c-format #~ msgid " Streams: %s\n" #~ msgstr " Strømme: %s\n" #, c-format #~ msgid " Blocks: %s\n" #~ msgstr " Blokke: %s\n" #, c-format #~ msgid " Ratio: %s\n" #~ msgstr " Pakkeforhold: %s\n" #, c-format #~ msgid " Check: %s\n" #~ msgstr " Kontrol: %s\n" #~ msgid "" #~ " Streams:\n" #~ " Stream Blocks CompOffset UncompOffset CompSize UncompSize Ratio Check Padding" #~ msgstr "" #~ " Strømme:\n" #~ " Strøm Blokke KompForsk. DekompForsk. KompStr. DekompStr. Forh. Kontrol Fyld" #, c-format #~ msgid "" #~ " Blocks:\n" #~ " Stream Block CompOffset UncompOffset TotalSize UncompSize Ratio Check" #~ msgstr "" #~ " Blokke:\n" #~ " Strøm Blok KompForsk. DekompForsk. Ialtstr. DekompStr. Forh. Kontrol" #, c-format #~ msgid " CheckVal %*s Header Flags CompSize MemUsage Filters" #~ msgstr " KontrolVær %*sTeksth Flag Kompstr. HukForb. Filtre" #, c-format #~ msgid "The selected match finder requires at least nice=%" #~ msgstr "Den valgte matchfinder kræver mindst nice=%"