// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) International Business Machines Corp., 2006 * * Author: Artem Bityutskiy (Битюцкий Артём) */ /* * UBI attaching sub-system. * * This sub-system is responsible for attaching MTD devices and it also * implements flash media scanning. * * The attaching information is represented by a &struct ubi_attach_info' * object. Information about volumes is represented by &struct ubi_ainf_volume * objects which are kept in volume RB-tree with root at the @volumes field. * The RB-tree is indexed by the volume ID. * * Logical eraseblocks are represented by &struct ubi_ainf_peb objects. These * objects are kept in per-volume RB-trees with the root at the corresponding * &struct ubi_ainf_volume object. To put it differently, we keep an RB-tree of * per-volume objects and each of these objects is the root of RB-tree of * per-LEB objects. * * Corrupted physical eraseblocks are put to the @corr list, free physical * eraseblocks are put to the @free list and the physical eraseblock to be * erased are put to the @erase list. * * About corruptions * ~~~~~~~~~~~~~~~~~ * * UBI protects EC and VID headers with CRC-32 checksums, so it can detect * whether the headers are corrupted or not. Sometimes UBI also protects the * data with CRC-32, e.g., when it executes the atomic LEB change operation, or * when it moves the contents of a PEB for wear-leveling purposes. * * UBI tries to distinguish between 2 types of corruptions. * * 1. Corruptions caused by power cuts. These are expected corruptions and UBI * tries to handle them gracefully, without printing too many warnings and * error messages. The idea is that we do not lose important data in these * cases - we may lose only the data which were being written to the media just * before the power cut happened, and the upper layers (e.g., UBIFS) are * supposed to handle such data losses (e.g., by using the FS journal). * * When UBI detects a corruption (CRC-32 mismatch) in a PEB, and it looks like * the reason is a power cut, UBI puts this PEB to the @erase list, and all * PEBs in the @erase list are scheduled for erasure later. * * 2. Unexpected corruptions which are not caused by power cuts. During * attaching, such PEBs are put to the @corr list and UBI preserves them. * Obviously, this lessens the amount of available PEBs, and if at some point * UBI runs out of free PEBs, it switches to R/O mode. UBI also loudly informs * about such PEBs every time the MTD device is attached. * * However, it is difficult to reliably distinguish between these types of * corruptions and UBI's strategy is as follows (in case of attaching by * scanning). UBI assumes corruption type 2 if the VID header is corrupted and * the data area does not contain all 0xFFs, and there were no bit-flips or * integrity errors (e.g., ECC errors in case of NAND) while reading the data * area. Otherwise UBI assumes corruption type 1. So the decision criteria * are as follows. * o If the data area contains only 0xFFs, there are no data, and it is safe * to just erase this PEB - this is corruption type 1. * o If the data area has bit-flips or data integrity errors (ECC errors on * NAND), it is probably a PEB which was being erased when power cut * happened, so this is corruption type 1. However, this is just a guess, * which might be wrong. * o Otherwise this is corruption type 2. */ #include #include #include #include #include #include "ubi.h" static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai); #define AV_FIND BIT(0) #define AV_ADD BIT(1) #define AV_FIND_OR_ADD (AV_FIND | AV_ADD) /** * find_or_add_av - internal function to find a volume, add a volume or do * both (find and add if missing). * @ai: attaching information * @vol_id: the requested volume ID * @flags: a combination of the %AV_FIND and %AV_ADD flags describing the * expected operation. If only %AV_ADD is set, -EEXIST is returned * if the volume already exists. If only %AV_FIND is set, NULL is * returned if the volume does not exist. And if both flags are * set, the helper first tries to find an existing volume, and if * it does not exist it creates a new one. * @created: in value used to inform the caller whether it"s a newly created * volume or not. * * This function returns a pointer to a volume description or an ERR_PTR if * the operation failed. It can also return NULL if only %AV_FIND is set and * the volume does not exist. */ static struct ubi_ainf_volume *find_or_add_av(struct ubi_attach_info *ai, int vol_id, unsigned int flags, bool *created) { struct ubi_ainf_volume *av; struct rb_node **p = &ai->volumes.rb_node, *parent = NULL; /* Walk the volume RB-tree to look if this volume is already present */ while (*p) { parent = *p; av = rb_entry(parent, struct ubi_ainf_volume, rb); if (vol_id == av->vol_id) { *created = false; if (!(flags & AV_FIND)) return ERR_PTR(-EEXIST); return av; } if (vol_id > av->vol_id) p = &(*p)->rb_left; else p = &(*p)->rb_right; } if (!(flags & AV_ADD)) return NULL; /* The volume is absent - add it */ av = kzalloc(sizeof(*av), GFP_KERNEL); if (!av) return ERR_PTR(-ENOMEM); av->vol_id = vol_id; if (vol_id > ai->highest_vol_id) ai->highest_vol_id = vol_id; rb_link_node(&av->rb, parent, p); rb_insert_color(&av->rb, &ai->volumes); ai->vols_found += 1; *created = true; dbg_bld("added volume %d", vol_id); return av; } /** * ubi_find_or_add_av - search for a volume in the attaching information and * add one if it does not exist. * @ai: attaching information * @vol_id: the requested volume ID * @created: whether the volume has been created or not * * This function returns a pointer to the new volume description or an * ERR_PTR if the operation failed. */ static struct ubi_ainf_volume *ubi_find_or_add_av(struct ubi_attach_info *ai, int vol_id, bool *created) { return find_or_add_av(ai, vol_id, AV_FIND_OR_ADD, created); } /** * ubi_alloc_aeb - allocate an aeb element * @ai: attaching information * @pnum: physical eraseblock number * @ec: erase counter of the physical eraseblock * * Allocate an aeb object and initialize the pnum and ec information. * vol_id and lnum are set to UBI_UNKNOWN, and the other fields are * initialized to zero. * Note that the element is not added in any list or RB tree. */ struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum, int ec) { struct ubi_ainf_peb *aeb; aeb = kmem_cache_zalloc(ai->aeb_slab_cache, GFP_KERNEL); if (!aeb) return NULL; aeb->pnum = pnum; aeb->ec = ec; aeb->vol_id = UBI_UNKNOWN; aeb->lnum = UBI_UNKNOWN; return aeb; } /** * ubi_free_aeb - free an aeb element * @ai: attaching information * @aeb: the element to free * * Free an aeb object. The caller must have removed the element from any list * or RB tree. */ void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb) { kmem_cache_free(ai->aeb_slab_cache, aeb); } /** * add_to_list - add physical eraseblock to a list. * @ai: attaching information * @pnum: physical eraseblock number to add * @vol_id: the last used volume id for the PEB * @lnum: the last used LEB number for the PEB * @ec: erase counter of the physical eraseblock * @to_head: if not zero, add to the head of the list * @list: the list to add to * * This function allocates a 'struct ubi_ainf_peb' object for physical * eraseblock @pnum and adds it to the "free", "erase", or "alien" lists. * It stores the @lnum and @vol_id alongside, which can both be * %UBI_UNKNOWN if they are not available, not readable, or not assigned. * If @to_head is not zero, PEB will be added to the head of the list, which * basically means it will be processed first later. E.g., we add corrupted * PEBs (corrupted due to power cuts) to the head of the erase list to make * sure we erase them first and get rid of corruptions ASAP. This function * returns zero in case of success and a negative error code in case of * failure. */ static int add_to_list(struct ubi_attach_info *ai, int pnum, int vol_id, int lnum, int ec, int to_head, struct list_head *list) { struct ubi_ainf_peb *aeb; if (list == &ai->free) { dbg_bld("add to free: PEB %d, EC %d", pnum, ec); } else if (list == &ai->erase) { dbg_bld("add to erase: PEB %d, EC %d", pnum, ec); } else if (list == &ai->alien) { dbg_bld("add to alien: PEB %d, EC %d", pnum, ec); ai->alien_peb_count += 1; } else BUG(); aeb = ubi_alloc_aeb(ai, pnum, ec); if (!aeb) return -ENOMEM; aeb->vol_id = vol_id; aeb->lnum = lnum; if (to_head) list_add(&aeb->u.list, list); else list_add_tail(&aeb->u.list, list); return 0; } /** * add_corrupted - add a corrupted physical eraseblock. * @ai: attaching information * @pnum: physical eraseblock number to add * @ec: erase counter of the physical eraseblock * * This function allocates a 'struct ubi_ainf_peb' object for a corrupted * physical eraseblock @pnum and adds it to the 'corr' list. The corruption * was presumably not caused by a power cut. Returns zero in case of success * and a negative error code in case of failure. */ static int add_corrupted(struct ubi_attach_info *ai, int pnum, int ec) { struct ubi_ainf_peb *aeb; dbg_bld("add to corrupted: PEB %d, EC %d", pnum, ec); aeb = ubi_alloc_aeb(ai, pnum, ec); if (!aeb) return -ENOMEM; ai->corr_peb_count += 1; list_add(&aeb->u.list, &ai->corr); return 0; } /** * add_fastmap - add a Fastmap related physical eraseblock. * @ai: attaching information * @pnum: physical eraseblock number the VID header came from * @vid_hdr: the volume identifier header * @ec: erase counter of the physical eraseblock * * This function allocates a 'struct ubi_ainf_peb' object for a Fastamp * physical eraseblock @pnum and adds it to the 'fastmap' list. * Such blocks can be Fastmap super and data blocks from both the most * recent Fastmap we're attaching from or from old Fastmaps which will * be erased. */ static int add_fastmap(struct ubi_attach_info *ai, int pnum, struct ubi_vid_hdr *vid_hdr, int ec) { struct ubi_ainf_peb *aeb; aeb = ubi_alloc_aeb(ai, pnum, ec); if (!aeb) return -ENOMEM; aeb->vol_id = be32_to_cpu(vid_hdr->vol_id); aeb->sqnum = be64_to_cpu(vid_hdr->sqnum); list_add(&aeb->u.list, &ai->fastmap); dbg_bld("add to fastmap list: PEB %d, vol_id %d, sqnum: %llu", pnum, aeb->vol_id, aeb->sqnum); return 0; } /** * validate_vid_hdr - check volume identifier header. * @ubi: UBI device description object * @vid_hdr: the volume identifier header to check * @av: information about the volume this logical eraseblock belongs to * @pnum: physical eraseblock number the VID header came from * * This function checks that data stored in @vid_hdr is consistent. Returns * non-zero if an inconsistency was found and zero if not. * * Note, UBI does sanity check of everything it reads from the flash media. * Most of the checks are done in the I/O sub-system. Here we check that the * information in the VID header is consistent to the information in other VID * headers of the same volume. */ static int validate_vid_hdr(const struct ubi_device *ubi, const struct ubi_vid_hdr *vid_hdr, const struct ubi_ainf_volume *av, int pnum) { int vol_type = vid_hdr->vol_type; int vol_id = be32_to_cpu(vid_hdr->vol_id); int used_ebs = be32_to_cpu(vid_hdr->used_ebs); int data_pad = be32_to_cpu(vid_hdr->data_pad); if (av->leb_count != 0) { int av_vol_type; /* * This is not the first logical eraseblock belonging to this * volume. Ensure that the data in its VID header is consistent * to the data in previous logical eraseblock headers. */ if (vol_id != av->vol_id) { ubi_err(ubi, "inconsistent vol_id"); goto bad; } if (av->vol_type == UBI_STATIC_VOLUME) av_vol_type = UBI_VID_STATIC; else av_vol_type = UBI_VID_DYNAMIC; if (vol_type != av_vol_type) { ubi_err(ubi, "inconsistent vol_type"); goto bad; } if (used_ebs != av->used_ebs) { ubi_err(ubi, "inconsistent used_ebs"); goto bad; } if (data_pad != av->data_pad) { ubi_err(ubi, "inconsistent data_pad"); goto bad; } } return 0; bad: ubi_err(ubi, "inconsistent VID header at PEB %d", pnum); ubi_dump_vid_hdr(vid_hdr); ubi_dump_av(av); return -EINVAL; } /** * add_volume - add volume to the attaching information. * @ai: attaching information * @vol_id: ID of the volume to add * @pnum: physical eraseblock number * @vid_hdr: volume identifier header * * If the volume corresponding to the @vid_hdr logical eraseblock is already * present in the attaching information, this function does nothing. Otherwise * it adds corresponding volume to the attaching information. Returns a pointer * to the allocated "av" object in case of success and a negative error code in * case of failure. */ static struct ubi_ainf_volume *add_volume(struct ubi_attach_info *ai, int vol_id, int pnum, const struct ubi_vid_hdr *vid_hdr) { struct ubi_ainf_volume *av; bool created; ubi_assert(vol_id == be32_to_cpu(vid_hdr->vol_id)); av = ubi_find_or_add_av(ai, vol_id, &created); if (IS_ERR(av) || !created) return av; av->used_ebs = be32_to_cpu(vid_hdr->used_ebs); av->data_pad = be32_to_cpu(vid_hdr->data_pad); av->compat = vid_hdr->compat; av->vol_type = vid_hdr->vol_type == UBI_VID_DYNAMIC ? UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME; return av; } /** * ubi_compare_lebs - find out which logical eraseblock is newer. * @ubi: UBI device description object * @aeb: first logical eraseblock to compare * @pnum: physical eraseblock number of the second logical eraseblock to * compare * @vid_hdr: volume identifier header of the second logical eraseblock * * This function compares 2 copies of a LEB and informs which one is newer. In * case of success this function returns a positive value, in case of failure, a * negative error code is returned. The success return codes use the following * bits: * o bit 0 is cleared: the first PEB (described by @aeb) is newer than the * second PEB (described by @pnum and @vid_hdr); * o bit 0 is set: the second PEB is newer; * o bit 1 is cleared: no bit-flips were detected in the newer LEB; * o bit 1 is set: bit-flips were detected in the newer LEB; * o bit 2 is cleared: the older LEB is not corrupted; * o bit 2 is set: the older LEB is corrupted. */ int ubi_compare_lebs(struct ubi_device *ubi, const struct ubi_ainf_peb *aeb, int pnum, const struct ubi_vid_hdr *vid_hdr) { int len, err, second_is_newer, bitflips = 0, corrupted = 0; uint32_t data_crc, crc; struct ubi_vid_io_buf *vidb = NULL; unsigned long long sqnum2 = be64_to_cpu(vid_hdr->sqnum); if (sqnum2 == aeb->sqnum) { /* * This must be a really ancient UBI image which has been * created before sequence numbers support has been added. At * that times we used 32-bit LEB versions stored in logical * eraseblocks. That was before UBI got into mainline. We do not * support these images anymore. Well, those images still work, * but only if no unclean reboots happened. */ ubi_err(ubi, "unsupported on-flash UBI format"); return -EINVAL; } /* Obviously the LEB with lower sequence counter is older */ second_is_newer = (sqnum2 > aeb->sqnum); /* * Now we know which copy is newer. If the copy flag of the PEB with * newer version is not set, then we just return, otherwise we have to * check data CRC. For the second PEB we already have the VID header, * for the first one - we'll need to re-read it from flash. * * Note: this may be optimized so that we wouldn't read twice. */ if (second_is_newer) { if (!vid_hdr->copy_flag) { /* It is not a copy, so it is newer */ dbg_bld("second PEB %d is newer, copy_flag is unset", pnum); return 1; } } else { if (!aeb->copy_flag) { /* It is not a copy, so it is newer */ dbg_bld("first PEB %d is newer, copy_flag is unset", pnum); return bitflips << 1; } vidb = ubi_alloc_vid_buf(ubi, GFP_KERNEL); if (!vidb) return -ENOMEM; pnum = aeb->pnum; err = ubi_io_read_vid_hdr(ubi, pnum, vidb, 0); if (err) { if (err == UBI_IO_BITFLIPS) bitflips = 1; else { ubi_err(ubi, "VID of PEB %d header is bad, but it was OK earlier, err %d", pnum, err); if (err > 0) err = -EIO; goto out_free_vidh; } } vid_hdr = ubi_get_vid_hdr(vidb); } /* Read the data of the copy and check the CRC */ len = be32_to_cpu(vid_hdr->data_size); mutex_lock(&ubi->buf_mutex); err = ubi_io_read_data(ubi, ubi->peb_buf, pnum, 0, len); if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err)) goto out_unlock; data_crc = be32_to_cpu(vid_hdr->data_crc); crc = crc32(UBI_CRC32_INIT, ubi->peb_buf, len); if (crc != data_crc) { dbg_bld("PEB %d CRC error: calculated %#08x, must be %#08x", pnum, crc, data_crc); corrupted = 1; bitflips = 0; second_is_newer = !second_is_newer; } else { dbg_bld("PEB %d CRC is OK", pnum); bitflips |= !!err; } mutex_unlock(&ubi->buf_mutex); ubi_free_vid_buf(vidb); if (second_is_newer) dbg_bld("second PEB %d is newer, copy_flag is set", pnum); else dbg_bld("first PEB %d is newer, copy_flag is set", pnum); return second_is_newer | (bitflips << 1) | (corrupted << 2); out_unlock: mutex_unlock(&ubi->buf_mutex); out_free_vidh: ubi_free_vid_buf(vidb); return err; } /** * ubi_add_to_av - add used physical eraseblock to the attaching information. * @ubi: UBI device description object * @ai: attaching information * @pnum: the physical eraseblock number * @ec: erase counter * @vid_hdr: the volume identifier header * @bitflips: if bit-flips were detected when this physical eraseblock was read * * This function adds information about a used physical eraseblock to the * 'used' tree of the corresponding volume. The function is rather complex * because it has to handle cases when this is not the first physical * eraseblock belonging to the same logical eraseblock, and the newer one has * to be picked, while the older one has to be dropped. This function returns * zero in case of success and a negative error code in case of failure. */ int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum, int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips) { int err, vol_id, lnum; unsigned long long sqnum; struct ubi_ainf_volume *av; struct ubi_ainf_peb *aeb; struct rb_node **p, *parent = NULL; vol_id = be32_to_cpu(vid_hdr->vol_id); lnum = be32_to_cpu(vid_hdr->lnum); sqnum = be64_to_cpu(vid_hdr->sqnum); dbg_bld("PEB %d, LEB %d:%d, EC %d, sqnum %llu, bitflips %d", pnum, vol_id, lnum, ec, sqnum, bitflips); av = add_volume(ai, vol_id, pnum, vid_hdr); if (IS_ERR(av)) return PTR_ERR(av); if (ai->max_sqnum < sqnum) ai->max_sqnum = sqnum; /* * Walk the RB-tree of logical eraseblocks of volume @vol_id to look * if this is the first instance of this logical eraseblock or not. */ p = &av->root.rb_node; while (*p) { int cmp_res; parent = *p; aeb = rb_entry(parent, struct ubi_ainf_peb, u.rb); if (lnum != aeb->lnum) { if (lnum < aeb->lnum) p = &(*p)->rb_left; else p = &(*p)->rb_right; continue; } /* * There is already a physical eraseblock describing the same * logical eraseblock present. */ dbg_bld("this LEB already exists: PEB %d, sqnum %llu, EC %d", aeb->pnum, aeb->sqnum, aeb->ec); /* * Make sure that the logical eraseblocks have different * sequence numbers. Otherwise the image is bad. * * However, if the sequence number is zero, we assume it must * be an ancient UBI image from the era when UBI did not have * sequence numbers. We still can attach these images, unless * there is a need to distinguish between old and new * eraseblocks, in which case we'll refuse the image in * 'ubi_compare_lebs()'. In other words, we attach old clean * images, but refuse attaching old images with duplicated * logical eraseblocks because there was an unclean reboot. */ if (aeb->sqnum == sqnum && sqnum != 0) { ubi_err(ubi, "two LEBs with same sequence number %llu", sqnum); ubi_dump_aeb(aeb, 0); ubi_dump_vid_hdr(vid_hdr); return -EINVAL; } /* * Now we have to drop the older one and preserve the newer * one. */ cmp_res = ubi_compare_lebs(ubi, aeb, pnum, vid_hdr); if (cmp_res < 0) return cmp_res; if (cmp_res & 1) { /* * This logical eraseblock is newer than the one * found earlier. */ err = validate_vid_hdr(ubi, vid_hdr, av, pnum); if (err) return err; err = add_to_list(ai, aeb->pnum, aeb->vol_id, aeb->lnum, aeb->ec, cmp_res & 4, &ai->erase); if (err) return err; aeb->ec = ec; aeb->pnum = pnum; aeb->vol_id = vol_id; aeb->lnum = lnum; aeb->scrub = ((cmp_res & 2) || bitflips); aeb->copy_flag = vid_hdr->copy_flag; aeb->sqnum = sqnum; if (av->highest_lnum == lnum) av->last_data_size = be32_to_cpu(vid_hdr->data_size); return 0; } else { /* * This logical eraseblock is older than the one found * previously. */ return add_to_list(ai, pnum, vol_id, lnum, ec, cmp_res & 4, &ai->erase); } } /* * We've met this logical eraseblock for the first time, add it to the * attaching information. */ err = validate_vid_hdr(ubi, vid_hdr, av, pnum); if (err) return err; aeb = ubi_alloc_aeb(ai, pnum, ec); if (!aeb) return -ENOMEM; aeb->vol_id = vol_id; aeb->lnum = lnum; aeb->scrub = bitflips; aeb->copy_flag = vid_hdr->copy_flag; aeb->sqnum = sqnum; if (av->highest_lnum <= lnum) { av->highest_lnum = lnum; av->last_data_size = be32_to_cpu(vid_hdr->data_size); } av->leb_count += 1; rb_link_node(&aeb->u.rb, parent, p); rb_insert_color(&aeb->u.rb, &av->root); return 0; } /** * ubi_add_av - add volume to the attaching information. * @ai: attaching information * @vol_id: the requested volume ID * * This function returns a pointer to the new volume description or an * ERR_PTR if the operation failed. */ struct ubi_ainf_volume *ubi_add_av(struct ubi_attach_info *ai, int vol_id) { bool created; return find_or_add_av(ai, vol_id, AV_ADD, &created); } /** * ubi_find_av - find volume in the attaching information. * @ai: attaching information * @vol_id: the requested volume ID * * This function returns a pointer to the volume description or %NULL if there * are no data about this volume in the attaching information. */ struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai, int vol_id) { bool created; return find_or_add_av((struct ubi_attach_info *)ai, vol_id, AV_FIND, &created); } static void destroy_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av, struct list_head *list); /** * ubi_remove_av - delete attaching information about a volume. * @ai: attaching information * @av: the volume attaching information to delete */ void ubi_remove_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av) { dbg_bld("remove attaching information about volume %d", av->vol_id); rb_erase(&av->rb, &ai->volumes); destroy_av(ai, av, &ai->erase); ai->vols_found -= 1; } /** * early_erase_peb - erase a physical eraseblock. * @ubi: UBI device description object * @ai: attaching information * @pnum: physical eraseblock number to erase; * @ec: erase counter value to write (%UBI_UNKNOWN if it is unknown) * * This function erases physical eraseblock 'pnum', and writes the erase * counter header to it. This function should only be used on UBI device * initialization stages, when the EBA sub-system had not been yet initialized. * This function returns zero in case of success and a negative error code in * case of failure. */ static int early_erase_peb(struct ubi_device *ubi, const struct ubi_attach_info *ai, int pnum, int ec) { int err; struct ubi_ec_hdr *ec_hdr; if ((long long)ec >= UBI_MAX_ERASECOUNTER) { /* * Erase counter overflow. Upgrade UBI and use 64-bit * erase counters internally. */ ubi_err(ubi, "erase counter overflow at PEB %d, EC %d", pnum, ec); return -EINVAL; } ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL); if (!ec_hdr) return -ENOMEM; ec_hdr->ec = cpu_to_be64(ec); err = ubi_io_sync_erase(ubi, pnum, 0); if (err < 0) goto out_free; err = ubi_io_write_ec_hdr(ubi, pnum, ec_hdr); out_free: kfree(ec_hdr); return err; } /** * ubi_early_get_peb - get a free physical eraseblock. * @ubi: UBI device description object * @ai: attaching information * * This function returns a free physical eraseblock. It is supposed to be * called on the UBI initialization stages when the wear-leveling sub-system is * not initialized yet. This function picks a physical eraseblocks from one of * the lists, writes the EC header if it is needed, and removes it from the * list. * * This function returns a pointer to the "aeb" of the found free PEB in case * of success and an error code in case of failure. */ struct ubi_ainf_peb *ubi_early_get_peb(struct ubi_device *ubi, struct ubi_attach_info *ai) { int err = 0; struct ubi_ainf_peb *aeb, *tmp_aeb; if (!list_empty(&ai->free)) { aeb = list_entry(ai->free.next, struct ubi_ainf_peb, u.list); list_del(&aeb->u.list); dbg_bld("return free PEB %d, EC %d", aeb->pnum, aeb->ec); return aeb; } /* * We try to erase the first physical eraseblock from the erase list * and pick it if we succeed, or try to erase the next one if not. And * so forth. We don't want to take care about bad eraseblocks here - * they'll be handled later. */ list_for_each_entry_safe(aeb, tmp_aeb, &ai->erase, u.list) { if (aeb->ec == UBI_UNKNOWN) aeb->ec = ai->mean_ec; err = early_erase_peb(ubi, ai, aeb->pnum, aeb->ec+1); if (err) continue; aeb->ec += 1; list_del(&aeb->u.list); dbg_bld("return PEB %d, EC %d", aeb->pnum, aeb->ec); return aeb; } ubi_err(ubi, "no free eraseblocks"); return ERR_PTR(-ENOSPC); } /** * check_corruption - check the data area of PEB. * @ubi: UBI device description object * @vid_hdr: the (corrupted) VID header of this PEB * @pnum: the physical eraseblock number to check * * This is a helper function which is used to distinguish between VID header * corruptions caused by power cuts and other reasons. If the PEB contains only * 0xFF bytes in the data area, the VID header is most probably corrupted * because of a power cut (%0 is returned in this case). Otherwise, it was * probably corrupted for some other reasons (%1 is returned in this case). A * negative error code is returned if a read error occurred. * * If the corruption reason was a power cut, UBI can safely erase this PEB. * Otherwise, it should preserve it to avoid possibly destroying important * information. */ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr, int pnum) { int err; mutex_lock(&ubi->buf_mutex); memset(ubi->peb_buf, 0x00, ubi->leb_size); err = ubi_io_read(ubi, ubi->peb_buf, pnum, ubi->leb_start, ubi->leb_size); if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) { /* * Bit-flips or integrity errors while reading the data area. * It is difficult to say for sure what type of corruption is * this, but presumably a power cut happened while this PEB was * erased, so it became unstable and corrupted, and should be * erased. */ err = 0; goto out_unlock; } if (err) goto out_unlock; if (ubi_check_pattern(ubi->peb_buf, 0xFF, ubi->leb_size)) goto out_unlock; ubi_err(ubi, "PEB %d contains corrupted VID header, and the data does not contain all 0xFF", pnum); ubi_err(ubi, "this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection"); ubi_dump_vid_hdr(vid_hdr); pr_err("hexdump of PEB %d offset %d, length %d", pnum, ubi->leb_start, ubi->leb_size); ubi_dbg_print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, ubi->peb_buf, ubi->leb_size, 1); err = 1; out_unlock: mutex_unlock(&ubi->buf_mutex); return err; } static bool vol_ignored(int vol_id) { switch (vol_id) { case UBI_LAYOUT_VOLUME_ID: return true; } #ifdef CONFIG_MTD_UBI_FASTMAP return ubi_is_fm_vol(vol_id); #else return false; #endif } static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech) { return ech->padding1[0] == 'E' && ech->padding1[1] == 'O' && ech->padding1[2] == 'F'; } /** * scan_peb - scan and process UBI headers of a PEB. * @ubi: UBI device description object * @ai: attaching information * @pnum: the physical eraseblock number * @fast: true if we're scanning for a Fastmap * * This function reads UBI headers of PEB @pnum, checks them, and adds * information about this PEB to the corresponding list or RB-tree in the * "attaching info" structure. Returns zero if the physical eraseblock was * successfully handled and a negative error code in case of failure. */ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum, bool fast) { struct ubi_ec_hdr *ech = ai->ech; struct ubi_vid_io_buf *vidb = ai->vidb; struct ubi_vid_hdr *vidh = ubi_get_vid_hdr(vidb); long long ec; int err, bitflips = 0, vol_id = -1, ec_err = 0; dbg_bld("scan PEB %d", pnum); /* Skip bad physical eraseblocks */ err = ubi_io_is_bad(ubi, pnum); if (err < 0) return err; else if (err) { ai->bad_peb_count += 1; return 0; } if (!ai->eof_found) { err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0); if (err < 0) return err; if (ec_hdr_has_eof(ech)) { pr_notice("UBI: EOF marker found, PEBs from %d will be erased\n", pnum); ai->eof_found = true; } } if (ai->eof_found) err = UBI_IO_FF_BITFLIPS; switch (err) { case 0: break; case UBI_IO_BITFLIPS: bitflips = 1; break; case UBI_IO_FF: ai->empty_peb_count += 1; return add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN, UBI_UNKNOWN, 0, &ai->erase); case UBI_IO_FF_BITFLIPS: ai->empty_peb_count += 1; return add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN, UBI_UNKNOWN, 1, &ai->erase); case UBI_IO_BAD_HDR_EBADMSG: case UBI_IO_BAD_HDR: /* * We have to also look at the VID header, possibly it is not * corrupted. Set %bitflips flag in order to make this PEB be * moved and EC be re-created. */ ec_err = err; ec = UBI_UNKNOWN; bitflips = 1; break; default: ubi_err(ubi, "'ubi_io_read_ec_hdr()' returned unknown code %d", err); return -EINVAL; } if (!ec_err) { int image_seq; /* Make sure UBI version is OK */ if (ech->version != UBI_VERSION) { ubi_err(ubi, "this UBI version is %d, image version is %d", UBI_VERSION, (int)ech->version); return -EINVAL; } ec = be64_to_cpu(ech->ec); if (ec > UBI_MAX_ERASECOUNTER) { /* * Erase counter overflow. The EC headers have 64 bits * reserved, but we anyway make use of only 31 bit * values, as this seems to be enough for any existing * flash. Upgrade UBI and use 64-bit erase counters * internally. */ ubi_err(ubi, "erase counter overflow, max is %d", UBI_MAX_ERASECOUNTER); ubi_dump_ec_hdr(ech); return -EINVAL; } /* * Make sure that all PEBs have the same image sequence number. * This allows us to detect situations when users flash UBI * images incorrectly, so that the flash has the new UBI image * and leftovers from the old one. This feature was added * relatively recently, and the sequence number was always * zero, because old UBI implementations always set it to zero. * For this reasons, we do not panic if some PEBs have zero * sequence number, while other PEBs have non-zero sequence * number. */ image_seq = be32_to_cpu(ech->image_seq); if (!ubi->image_seq) ubi->image_seq = image_seq; if (image_seq && ubi->image_seq != image_seq) { ubi_err(ubi, "bad image sequence number %d in PEB %d, expected %d", image_seq, pnum, ubi->image_seq); ubi_dump_ec_hdr(ech); return -EINVAL; } } /* OK, we've done with the EC header, let's look at the VID header */ err = ubi_io_read_vid_hdr(ubi, pnum, vidb, 0); if (err < 0) return err; switch (err) { case 0: break; case UBI_IO_BITFLIPS: bitflips = 1; break; case UBI_IO_BAD_HDR_EBADMSG: if (ec_err == UBI_IO_BAD_HDR_EBADMSG) /* * Both EC and VID headers are corrupted and were read * with data integrity error, probably this is a bad * PEB, bit it is not marked as bad yet. This may also * be a result of power cut during erasure. */ ai->maybe_bad_peb_count += 1; fallthrough; case UBI_IO_BAD_HDR: /* * If we're facing a bad VID header we have to drop *all* * Fastmap data structures we find. The most recent Fastmap * could be bad and therefore there is a chance that we attach * from an old one. On a fine MTD stack a PEB must not render * bad all of a sudden, but the reality is different. * So, let's be paranoid and help finding the root cause by * falling back to scanning mode instead of attaching with a * bad EBA table and cause data corruption which is hard to * analyze. */ if (fast) ai->force_full_scan = 1; if (ec_err) /* * Both headers are corrupted. There is a possibility * that this a valid UBI PEB which has corresponding * LEB, but the headers are corrupted. However, it is * impossible to distinguish it from a PEB which just * contains garbage because of a power cut during erase * operation. So we just schedule this PEB for erasure. * * Besides, in case of NOR flash, we deliberately * corrupt both headers because NOR flash erasure is * slow and can start from the end. */ err = 0; else /* * The EC was OK, but the VID header is corrupted. We * have to check what is in the data area. */ err = check_corruption(ubi, vidh, pnum); if (err < 0) return err; else if (!err) /* This corruption is caused by a power cut */ err = add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN, ec, 1, &ai->erase); else /* This is an unexpected corruption */ err = add_corrupted(ai, pnum, ec); if (err) return err; goto adjust_mean_ec; case UBI_IO_FF_BITFLIPS: err = add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN, ec, 1, &ai->erase); if (err) return err; goto adjust_mean_ec; case UBI_IO_FF: if (ec_err || bitflips) err = add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN, ec, 1, &ai->erase); else err = add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN, ec, 0, &ai->free); if (err) return err; goto adjust_mean_ec; default: ubi_err(ubi, "'ubi_io_read_vid_hdr()' returned unknown code %d", err); return -EINVAL; } vol_id = be32_to_cpu(vidh->vol_id); if (vol_id > UBI_MAX_VOLUMES && !vol_ignored(vol_id)) { int lnum = be32_to_cpu(vidh->lnum); /* Unsupported internal volume */ switch (vidh->compat) { case UBI_COMPAT_DELETE: ubi_msg(ubi, "\"delete\" compatible internal volume %d:%d found, will remove it", vol_id, lnum); err = add_to_list(ai, pnum, vol_id, lnum, ec, 1, &ai->erase); if (err) return err; return 0; case UBI_COMPAT_RO: ubi_msg(ubi, "read-only compatible internal volume %d:%d found, switch to read-only mode", vol_id, lnum); ubi->ro_mode = 1; break; case UBI_COMPAT_PRESERVE: ubi_msg(ubi, "\"preserve\" compatible internal volume %d:%d found", vol_id, lnum); err = add_to_list(ai, pnum, vol_id, lnum, ec, 0, &ai->alien); if (err) return err; return 0; case UBI_COMPAT_REJECT: ubi_err(ubi, "incompatible internal volume %d:%d found", vol_id, lnum); return -EINVAL; } } if (ec_err) ubi_warn(ubi, "valid VID header but corrupted EC header at PEB %d", pnum); if (ubi_is_fm_vol(vol_id)) err = add_fastmap(ai, pnum, vidh, ec); else err = ubi_add_to_av(ubi, ai, pnum, ec, vidh, bitflips); if (err) return err; adjust_mean_ec: if (!ec_err) { ai->ec_sum += ec; ai->ec_count += 1; if (ec > ai->max_ec) ai->max_ec = ec; if (ec < ai->min_ec) ai->min_ec = ec; } return 0; } /** * late_analysis - analyze the overall situation with PEB. * @ubi: UBI device description object * @ai: attaching information * * This is a helper function which takes a look what PEBs we have after we * gather information about all of them ("ai" is compete). It decides whether * the flash is empty and should be formatted of whether there are too many * corrupted PEBs and we should not attach this MTD device. Returns zero if we * should proceed with attaching the MTD device, and %-EINVAL if we should not. */ static int late_analysis(struct ubi_device *ubi, struct ubi_attach_info *ai) { struct ubi_ainf_peb *aeb; int max_corr, peb_count; peb_count = ubi->peb_count - ai->bad_peb_count - ai->alien_peb_count; max_corr = peb_count / 20 ?: 8; /* * Few corrupted PEBs is not a problem and may be just a result of * unclean reboots. However, many of them may indicate some problems * with the flash HW or driver. */ if (ai->corr_peb_count) { ubi_err(ubi, "%d PEBs are corrupted and preserved", ai->corr_peb_count); pr_err("Corrupted PEBs are:"); list_for_each_entry(aeb, &ai->corr, u.list) pr_cont(" %d", aeb->pnum); pr_cont("\n"); /* * If too many PEBs are corrupted, we refuse attaching, * otherwise, only print a warning. */ if (ai->corr_peb_count >= max_corr) { ubi_err(ubi, "too many corrupted PEBs, refusing"); return -EINVAL; } } if (ai->empty_peb_count + ai->maybe_bad_peb_count == peb_count) { /* * All PEBs are empty, or almost all - a couple PEBs look like * they may be bad PEBs which were not marked as bad yet. * * This piece of code basically tries to distinguish between * the following situations: * * 1. Flash is empty, but there are few bad PEBs, which are not * marked as bad so far, and which were read with error. We * want to go ahead and format this flash. While formatting, * the faulty PEBs will probably be marked as bad. * * 2. Flash contains non-UBI data and we do not want to format * it and destroy possibly important information. */ if (ai->maybe_bad_peb_count <= 2) { ai->is_empty = 1; ubi_msg(ubi, "empty MTD device detected"); get_random_bytes(&ubi->image_seq, sizeof(ubi->image_seq)); } else { ubi_err(ubi, "MTD device is not UBI-formatted and possibly contains non-UBI data - refusing it"); return -EINVAL; } } return 0; } /** * destroy_av - free volume attaching information. * @av: volume attaching information * @ai: attaching information * @list: put the aeb elements in there if !NULL, otherwise free them * * This function destroys the volume attaching information. */ static void destroy_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av, struct list_head *list) { struct ubi_ainf_peb *aeb; struct rb_node *this = av->root.rb_node; while (this) { if (this->rb_left) this = this->rb_left; else if (this->rb_right) this = this->rb_right; else { aeb = rb_entry(this, struct ubi_ainf_peb, u.rb); this = rb_parent(this); if (this) { if (this->rb_left == &aeb->u.rb) this->rb_left = NULL; else this->rb_right = NULL; } if (list) list_add_tail(&aeb->u.list, list); else ubi_free_aeb(ai, aeb); } } kfree(av); } /** * destroy_ai - destroy attaching information. * @ai: attaching information */ static void destroy_ai(struct ubi_attach_info *ai) { struct ubi_ainf_peb *aeb, *aeb_tmp; struct ubi_ainf_volume *av; struct rb_node *rb; list_for_each_entry_safe(aeb, aeb_tmp, &ai->alien, u.list) { list_del(&aeb->u.list); ubi_free_aeb(ai, aeb); } list_for_each_entry_safe(aeb, aeb_tmp, &ai->erase, u.list) { list_del(&aeb->u.list); ubi_free_aeb(ai, aeb); } list_for_each_entry_safe(aeb, aeb_tmp, &ai->corr, u.list) { list_del(&aeb->u.list); ubi_free_aeb(ai, aeb); } list_for_each_entry_safe(aeb, aeb_tmp, &ai->free, u.list) { list_del(&aeb->u.list); ubi_free_aeb(ai, aeb); } list_for_each_entry_safe(aeb, aeb_tmp, &ai->fastmap, u.list) { list_del(&aeb->u.list); ubi_free_aeb(ai, aeb); } /* Destroy the volume RB-tree */ rb = ai->volumes.rb_node; while (rb) { if (rb->rb_left) rb = rb->rb_left; else if (rb->rb_right) rb = rb->rb_right; else { av = rb_entry(rb, struct ubi_ainf_volume, rb); rb = rb_parent(rb); if (rb) { if (rb->rb_left == &av->rb) rb->rb_left = NULL; else rb->rb_right = NULL; } destroy_av(ai, av, NULL); } } kmem_cache_destroy(ai->aeb_slab_cache); kfree(ai); } /** * scan_all - scan entire MTD device. * @ubi: UBI device description object * @ai: attach info object * @start: start scanning at this PEB * * This function does full scanning of an MTD device and returns complete * information about it in form of a "struct ubi_attach_info" object. In case * of failure, an error code is returned. */ static int scan_all(struct ubi_device *ubi, struct ubi_attach_info *ai, int start) { int err, pnum; struct rb_node *rb1, *rb2; struct ubi_ainf_volume *av; struct ubi_ainf_peb *aeb; err = -ENOMEM; ai->ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL); if (!ai->ech) return err; ai->vidb = ubi_alloc_vid_buf(ubi, GFP_KERNEL); if (!ai->vidb) goto out_ech; for (pnum = start; pnum < ubi->peb_count; pnum++) { cond_resched(); dbg_gen("process PEB %d", pnum); err = scan_peb(ubi, ai, pnum, false); if (err < 0) goto out_vidh; } ubi_msg(ubi, "scanning is finished"); /* Calculate mean erase counter */ if (ai->ec_count) ai->mean_ec = div_u64(ai->ec_sum, ai->ec_count); err = late_analysis(ubi, ai); if (err) goto out_vidh; /* * In case of unknown erase counter we use the mean erase counter * value. */ ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) { ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) if (aeb->ec == UBI_UNKNOWN) aeb->ec = ai->mean_ec; } list_for_each_entry(aeb, &ai->free, u.list) { if (aeb->ec == UBI_UNKNOWN) aeb->ec = ai->mean_ec; } list_for_each_entry(aeb, &ai->corr, u.list) if (aeb->ec == UBI_UNKNOWN) aeb->ec = ai->mean_ec; list_for_each_entry(aeb, &ai->erase, u.list) if (aeb->ec == UBI_UNKNOWN) aeb->ec = ai->mean_ec; err = self_check_ai(ubi, ai); if (err) goto out_vidh; ubi_free_vid_buf(ai->vidb); kfree(ai->ech); return 0; out_vidh: ubi_free_vid_buf(ai->vidb); out_ech: kfree(ai->ech); return err; } static struct ubi_attach_info *alloc_ai(void) { struct ubi_attach_info *ai; ai = kzalloc(sizeof(struct ubi_attach_info), GFP_KERNEL); if (!ai) return ai; INIT_LIST_HEAD(&ai->corr); INIT_LIST_HEAD(&ai->free); INIT_LIST_HEAD(&ai->erase); INIT_LIST_HEAD(&ai->alien); INIT_LIST_HEAD(&ai->fastmap); ai->volumes = RB_ROOT; ai->aeb_slab_cache = kmem_cache_create("ubi_aeb_slab_cache", sizeof(struct ubi_ainf_peb), 0, 0, NULL); if (!ai->aeb_slab_cache) { kfree(ai); ai = NULL; } return ai; } #ifdef CONFIG_MTD_UBI_FASTMAP /** * scan_fast - try to find a fastmap and attach from it. * @ubi: UBI device description object * @ai: attach info object * * Returns 0 on success, negative return values indicate an internal * error. * UBI_NO_FASTMAP denotes that no fastmap was found. * UBI_BAD_FASTMAP denotes that the found fastmap was invalid. */ static int scan_fast(struct ubi_device *ubi, struct ubi_attach_info **ai) { int err, pnum; struct ubi_attach_info *scan_ai; err = -ENOMEM; scan_ai = alloc_ai(); if (!scan_ai) goto out; scan_ai->ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL); if (!scan_ai->ech) goto out_ai; scan_ai->vidb = ubi_alloc_vid_buf(ubi, GFP_KERNEL); if (!scan_ai->vidb) goto out_ech; for (pnum = 0; pnum < UBI_FM_MAX_START; pnum++) { cond_resched(); dbg_gen("process PEB %d", pnum); err = scan_peb(ubi, scan_ai, pnum, true); if (err < 0) goto out_vidh; } ubi_free_vid_buf(scan_ai->vidb); kfree(scan_ai->ech); if (scan_ai->force_full_scan) err = UBI_NO_FASTMAP; else err = ubi_scan_fastmap(ubi, *ai, scan_ai); if (err) { /* * Didn't attach via fastmap, do a full scan but reuse what * we've aready scanned. */ destroy_ai(*ai); *ai = scan_ai; } else destroy_ai(scan_ai); return err; out_vidh: ubi_free_vid_buf(scan_ai->vidb); out_ech: kfree(scan_ai->ech); out_ai: destroy_ai(scan_ai); out: return err; } #endif /** * ubi_attach - attach an MTD device. * @ubi: UBI device descriptor * @force_scan: if set to non-zero attach by scanning * * This function returns zero in case of success and a negative error code in * case of failure. */ int ubi_attach(struct ubi_device *ubi, int force_scan) { int err; struct ubi_attach_info *ai; ai = alloc_ai(); if (!ai) return -ENOMEM; #ifdef CONFIG_MTD_UBI_FASTMAP /* On small flash devices we disable fastmap in any case. */ if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) { ubi->fm_disabled = 1; force_scan = 1; } if (force_scan) err = scan_all(ubi, ai, 0); else { err = scan_fast(ubi, &ai); if (err > 0 || mtd_is_eccerr(err)) { if (err != UBI_NO_FASTMAP) { destroy_ai(ai); ai = alloc_ai(); if (!ai) return -ENOMEM; err = scan_all(ubi, ai, 0); } else { err = scan_all(ubi, ai, UBI_FM_MAX_START); } } } #else err = scan_all(ubi, ai, 0); #endif if (err) goto out_ai; ubi->bad_peb_count = ai->bad_peb_count; ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count; ubi->corr_peb_count = ai->corr_peb_count; ubi->max_ec = ai->max_ec; ubi->mean_ec = ai->mean_ec; dbg_gen("max. sequence number: %llu", ai->max_sqnum); err = ubi_read_volume_table(ubi, ai); if (err) goto out_ai; err = ubi_wl_init(ubi, ai); if (err) goto out_vtbl; err = ubi_eba_init(ubi, ai); if (err) goto out_wl; #ifdef CONFIG_MTD_UBI_FASTMAP if (ubi->fm && ubi_dbg_chk_fastmap(ubi)) { struct ubi_attach_info *scan_ai; scan_ai = alloc_ai(); if (!scan_ai) { err = -ENOMEM; goto out_wl; } err = scan_all(ubi, scan_ai, 0); if (err) { destroy_ai(scan_ai); goto out_wl; } err = self_check_eba(ubi, ai, scan_ai); destroy_ai(scan_ai); if (err) goto out_wl; } #endif destroy_ai(ai); return 0; out_wl: ubi_wl_close(ubi); out_vtbl: ubi_free_all_volumes(ubi); vfree(ubi->vtbl); out_ai: destroy_ai(ai); return err; } /** * self_check_ai - check the attaching information. * @ubi: UBI device description object * @ai: attaching information * * This function returns zero if the attaching information is all right, and a * negative error code if not or if an error occurred. */ static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai) { struct ubi_vid_io_buf *vidb = ai->vidb; struct ubi_vid_hdr *vidh = ubi_get_vid_hdr(vidb); int pnum, err, vols_found = 0; struct rb_node *rb1, *rb2; struct ubi_ainf_volume *av; struct ubi_ainf_peb *aeb, *last_aeb; uint8_t *buf; if (!ubi_dbg_chk_gen(ubi)) return 0; /* * At first, check that attaching information is OK. */ ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) { int leb_count = 0; cond_resched(); vols_found += 1; if (ai->is_empty) { ubi_err(ubi, "bad is_empty flag"); goto bad_av; } if (av->vol_id < 0 || av->highest_lnum < 0 || av->leb_count < 0 || av->vol_type < 0 || av->used_ebs < 0 || av->data_pad < 0 || av->last_data_size < 0) { ubi_err(ubi, "negative values"); goto bad_av; } if (av->vol_id >= UBI_MAX_VOLUMES && av->vol_id < UBI_INTERNAL_VOL_START) { ubi_err(ubi, "bad vol_id"); goto bad_av; } if (av->vol_id > ai->highest_vol_id) { ubi_err(ubi, "highest_vol_id is %d, but vol_id %d is there", ai->highest_vol_id, av->vol_id); goto out; } if (av->vol_type != UBI_DYNAMIC_VOLUME && av->vol_type != UBI_STATIC_VOLUME) { ubi_err(ubi, "bad vol_type"); goto bad_av; } if (av->data_pad > ubi->leb_size / 2) { ubi_err(ubi, "bad data_pad"); goto bad_av; } last_aeb = NULL; ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) { cond_resched(); last_aeb = aeb; leb_count += 1; if (aeb->pnum < 0 || aeb->ec < 0) { ubi_err(ubi, "negative values"); goto bad_aeb; } if (aeb->ec < ai->min_ec) { ubi_err(ubi, "bad ai->min_ec (%d), %d found", ai->min_ec, aeb->ec); goto bad_aeb; } if (aeb->ec > ai->max_ec) { ubi_err(ubi, "bad ai->max_ec (%d), %d found", ai->max_ec, aeb->ec); goto bad_aeb; } if (aeb->pnum >= ubi->peb_count) { ubi_err(ubi, "too high PEB number %d, total PEBs %d", aeb->pnum, ubi->peb_count); goto bad_aeb; } if (av->vol_type == UBI_STATIC_VOLUME) { if (aeb->lnum >= av->used_ebs) { ubi_err(ubi, "bad lnum or used_ebs"); goto bad_aeb; } } else { if (av->used_ebs != 0) { ubi_err(ubi, "non-zero used_ebs"); goto bad_aeb; } } if (aeb->lnum > av->highest_lnum) { ubi_err(ubi, "incorrect highest_lnum or lnum"); goto bad_aeb; } } if (av->leb_count != leb_count) { ubi_err(ubi, "bad leb_count, %d objects in the tree", leb_count); goto bad_av; } if (!last_aeb) continue; aeb = last_aeb; if (aeb->lnum != av->highest_lnum) { ubi_err(ubi, "bad highest_lnum"); goto bad_aeb; } } if (vols_found != ai->vols_found) { ubi_err(ubi, "bad ai->vols_found %d, should be %d", ai->vols_found, vols_found); goto out; } /* Check that attaching information is correct */ ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) { last_aeb = NULL; ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) { int vol_type; cond_resched(); last_aeb = aeb; err = ubi_io_read_vid_hdr(ubi, aeb->pnum, vidb, 1); if (err && err != UBI_IO_BITFLIPS) { ubi_err(ubi, "VID header is not OK (%d)", err); if (err > 0) err = -EIO; return err; } vol_type = vidh->vol_type == UBI_VID_DYNAMIC ? UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME; if (av->vol_type != vol_type) { ubi_err(ubi, "bad vol_type"); goto bad_vid_hdr; } if (aeb->sqnum != be64_to_cpu(vidh->sqnum)) { ubi_err(ubi, "bad sqnum %llu", aeb->sqnum); goto bad_vid_hdr; } if (av->vol_id != be32_to_cpu(vidh->vol_id)) { ubi_err(ubi, "bad vol_id %d", av->vol_id); goto bad_vid_hdr; } if (av->compat != vidh->compat) { ubi_err(ubi, "bad compat %d", vidh->compat); goto bad_vid_hdr; } if (aeb->lnum != be32_to_cpu(vidh->lnum)) { ubi_err(ubi, "bad lnum %d", aeb->lnum); goto bad_vid_hdr; } if (av->used_ebs != be32_to_cpu(vidh->used_ebs)) { ubi_err(ubi, "bad used_ebs %d", av->used_ebs); goto bad_vid_hdr; } if (av->data_pad != be32_to_cpu(vidh->data_pad)) { ubi_err(ubi, "bad data_pad %d", av->data_pad); goto bad_vid_hdr; } } if (!last_aeb) continue; if (av->highest_lnum != be32_to_cpu(vidh->lnum)) { ubi_err(ubi, "bad highest_lnum %d", av->highest_lnum); goto bad_vid_hdr; } if (av->last_data_size != be32_to_cpu(vidh->data_size)) { ubi_err(ubi, "bad last_data_size %d", av->last_data_size); goto bad_vid_hdr; } } /* * Make sure that all the physical eraseblocks are in one of the lists * or trees. */ buf = kzalloc(ubi->peb_count, GFP_KERNEL); if (!buf) return -ENOMEM; for (pnum = 0; pnum < ubi->peb_count; pnum++) { err = ubi_io_is_bad(ubi, pnum); if (err < 0) { kfree(buf); return err; } else if (err) buf[pnum] = 1; } ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) buf[aeb->pnum] = 1; list_for_each_entry(aeb, &ai->free, u.list) buf[aeb->pnum] = 1; list_for_each_entry(aeb, &ai->corr, u.list) buf[aeb->pnum] = 1; list_for_each_entry(aeb, &ai->erase, u.list) buf[aeb->pnum] = 1; list_for_each_entry(aeb, &ai->alien, u.list) buf[aeb->pnum] = 1; err = 0; for (pnum = 0; pnum < ubi->peb_count; pnum++) if (!buf[pnum]) { ubi_err(ubi, "PEB %d is not referred", pnum); err = 1; } kfree(buf); if (err) goto out; return 0; bad_aeb: ubi_err(ubi, "bad attaching information about LEB %d", aeb->lnum); ubi_dump_aeb(aeb, 0); ubi_dump_av(av); goto out; bad_av: ubi_err(ubi, "bad attaching information about volume %d", av->vol_id); ubi_dump_av(av); goto out; bad_vid_hdr: ubi_err(ubi, "bad attaching information about volume %d", av->vol_id); ubi_dump_av(av); ubi_dump_vid_hdr(vidh); out: dump_stack(); return -EINVAL; }