;; Machine description of the Synopsys DesignWare ARC cpu for GNU C compiler ;; Copyright (C) 1994-2022 Free Software Foundation, Inc. ;; Sources derived from work done by Sankhya Technologies (www.sankhya.com) on ;; behalf of Synopsys Inc. ;; Position Independent Code support added,Code cleaned up, ;; Comments and Support For ARC700 instructions added by ;; Saurabh Verma (saurabh.verma@codito.com) ;; Ramana Radhakrishnan(ramana.radhakrishnan@codito.com) ;; ;; Performance improvements by ;; Joern Rennecke (joern.rennecke@embecosm.com) ;; ;; This file is part of GCC. ;; GCC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 3, or (at your option) ;; any later version. ;; GCC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; . ;; See file "rtl.def" for documentation on define_insn, match_*, et. al. ;; dest, src Two operand instruction's syntax ;; dest, src1, src2 Three operand instruction's syntax ;; ARC and ARCompact PREDICATES: ;; ;; comparison_operator LT, GT, LE, GE, LTU, GTU, LEU, GEU, EQ, NE ;; memory_operand memory [m] ;; immediate_operand immediate constant [IKLMNOP] ;; register_operand register [rq] ;; general_operand register, memory, constant [rqmIKLMNOP] ;; Note that the predicates are only used when selecting a pattern ;; to determine if an operand is valid. ;; The constraints then select which of the possible valid operands ;; is present (and guide register selection). The actual assembly ;; instruction is then selected on the basis of the constraints. ;; ARC and ARCompact CONSTRAINTS: ;; ;; b stack pointer r28 ;; f frame pointer r27 ;; Rgp global pointer r26 ;; g general reg, memory, constant ;; m memory ;; p memory address ;; q registers commonly used in ;; 16-bit insns r0-r3, r12-r15 ;; c core registers r0-r60, ap, pcl ;; r general registers r0-r28, blink, ap, pcl ;; ;; H fp 16-bit constant ;; I signed 12-bit immediate (for ARCompact) ;; K unsigned 3-bit immediate (for ARCompact) ;; L unsigned 6-bit immediate (for ARCompact) ;; M unsinged 5-bit immediate (for ARCompact) ;; O unsinged 7-bit immediate (for ARCompact) ;; P unsinged 8-bit immediate (for ARCompact) ;; N constant '1' (for ARCompact) ;; TODO: ;; -> prefetch instruction ;; ----------------------------------------------------------------------------- ;; Include DFA scheduluers (include ("arc600.md")) (include ("arc700.md")) (include ("arcEM.md")) (include ("arcHS.md")) (include ("arcHS4x.md")) ;; Predicates (include ("predicates.md")) (include ("constraints.md")) ;; ----------------------------------------------------------------------------- ;; UNSPEC Usage: ;; ~~~~~~~~~~~~ ;; ----------------------------------------------------------------------------- ;; Symbolic name Value Desc. ;; ----------------------------------------------------------------------------- ;; UNSPEC_PLT 3 symbol to be referenced through the PLT ;; UNSPEC_GOT 4 symbol to be rerenced through the GOT ;; UNSPEC_GOTOFF 5 Local symbol.To be referenced relative to the ;; GOTBASE.(Referenced as @GOTOFF) ;; UNSPEC_GOTOFFPC 6 Local symbol. To be referenced pc-relative. ;; ---------------------------------------------------------------------------- (define_c_enum "unspec" [ DUMMY_0 DUMMY_1 DUMMY_2 ARC_UNSPEC_PLT ARC_UNSPEC_GOT ARC_UNSPEC_GOTOFF ARC_UNSPEC_GOTOFFPC UNSPEC_TLS_GD UNSPEC_TLS_LD UNSPEC_TLS_IE UNSPEC_TLS_OFF UNSPEC_ARC_NORM UNSPEC_ARC_NORMW UNSPEC_ARC_SWAP UNSPEC_ARC_DIVAW UNSPEC_ARC_DIRECT UNSPEC_ARC_LP UNSPEC_ARC_CASESI UNSPEC_ARC_FFS UNSPEC_ARC_FLS UNSPEC_ARC_MEMBAR UNSPEC_ARC_DMACH UNSPEC_ARC_DMACHU UNSPEC_ARC_DMACWH UNSPEC_ARC_DMACWHU UNSPEC_ARC_DMPYWH UNSPEC_ARC_QMACH UNSPEC_ARC_QMACHU UNSPEC_ARC_QMPYH UNSPEC_ARC_QMPYHU UNSPEC_ARC_VMAC2H UNSPEC_ARC_VMAC2HU UNSPEC_ARC_VMPY2H UNSPEC_ARC_VMPY2HU VUNSPEC_ARC_RTIE VUNSPEC_ARC_SYNC VUNSPEC_ARC_BRK VUNSPEC_ARC_FLAG VUNSPEC_ARC_SLEEP VUNSPEC_ARC_SWI VUNSPEC_ARC_CORE_READ VUNSPEC_ARC_CORE_WRITE VUNSPEC_ARC_LR VUNSPEC_ARC_SR VUNSPEC_ARC_TRAP_S VUNSPEC_ARC_UNIMP_S VUNSPEC_ARC_KFLAG VUNSPEC_ARC_CLRI VUNSPEC_ARC_SETI VUNSPEC_ARC_NOP VUNSPEC_ARC_STACK_IRQ VUNSPEC_ARC_DEXCL VUNSPEC_ARC_DEXCL_NORES VUNSPEC_ARC_LR_HIGH VUNSPEC_ARC_EX VUNSPEC_ARC_CAS VUNSPEC_ARC_SC VUNSPEC_ARC_LL VUNSPEC_ARC_BLOCKAGE VUNSPEC_ARC_EH_RETURN VUNSPEC_ARC_ARC600_RTIE VUNSPEC_ARC_ARC600_STALL VUNSPEC_ARC_LDDI VUNSPEC_ARC_STDI ]) (define_constants [(R0_REG 0) (R1_REG 1) (R2_REG 2) (R3_REG 3) (R4_REG 4) (R9_REG 9) (R10_REG 10) (R12_REG 12) (R15_REG 15) (R16_REG 16) (R25_REG 25) (SP_REG 28) (ILINK1_REG 29) (ILINK2_REG 30) (R30_REG 30) (RETURN_ADDR_REGNUM 31) (R32_REG 32) (R33_REG 33) (R34_REG 34) (R35_REG 35) (R36_REG 36) (R37_REG 37) (R38_REG 38) (R39_REG 39) (R40_REG 40) (R41_REG 41) (R42_REG 42) (R43_REG 43) (R44_REG 44) (R45_REG 45) (R46_REG 46) (R47_REG 47) (R48_REG 48) (R49_REG 49) (R50_REG 50) (R51_REG 51) (R52_REG 52) (R53_REG 53) (R54_REG 54) (R55_REG 55) (R56_REG 56) (R57_REG 57) (R58_REG 58) (R59_REG 59) (MUL64_OUT_REG 58) (MUL32x16_REG 56) (ARCV2_ACC 58) (LP_COUNT 60) (CC_REG 61) (PCL_REG 63) ] ) ;; What is the insn_cost for this insn? The target hook can still override ;; this. For optimizing for size the "length" attribute is used instead. (define_attr "cost" "" (const_int 0)) (define_attr "is_sfunc" "no,yes" (const_string "no")) ;; Insn type. Used to default other attribute values. ; While the attribute is_sfunc is set for any call of a special function, ; the instruction type sfunc is used only for the special call sequence ; that loads the (pc-relative) function address into r12 and then calls ; via r12. (define_attr "type" "move,load,store,cmove,unary,binary,compare,shift,uncond_branch,jump,branch, brcc,brcc_no_delay_slot,call,sfunc,call_no_delay_slot,rtie, multi,umulti, two_cycle_core,lr,sr,divaw,loop_setup,loop_end,return, misc,spfp,dpfp_mult,dpfp_addsub,mulmac_600,cc_arith, simd_vload, simd_vload128, simd_vstore, simd_vmove, simd_vmove_else_zero, simd_vmove_with_acc, simd_varith_1cycle, simd_varith_2cycle, simd_varith_with_acc, simd_vlogic, simd_vlogic_with_acc, simd_vcompare, simd_vpermute, simd_vpack, simd_vpack_with_acc, simd_valign, simd_valign_with_acc, simd_vcontrol, simd_vspecial_3cycle, simd_vspecial_4cycle, simd_dma, mul16_em, div_rem, fpu, fpu_fuse, fpu_sdiv, fpu_ddiv, fpu_cvt, block" (cond [(eq_attr "is_sfunc" "yes") (cond [(match_test "!TARGET_LONG_CALLS_SET && (!TARGET_MEDIUM_CALLS || GET_CODE (PATTERN (insn)) != COND_EXEC)") (const_string "call") (match_test "flag_pic") (const_string "sfunc")] (const_string "call_no_delay_slot"))] (const_string "binary"))) ;; The following three attributes are mixed case so that they can be ;; used conveniently with the CALL_ATTR macro. (define_attr "is_CALL" "no,yes" (cond [(eq_attr "is_sfunc" "yes") (const_string "yes") (eq_attr "type" "call,call_no_delay_slot") (const_string "yes")] (const_string "no"))) (define_attr "is_SIBCALL" "no,yes" (const_string "no")) (define_attr "is_NON_SIBCALL" "no,yes" (cond [(eq_attr "is_SIBCALL" "yes") (const_string "no") (eq_attr "is_CALL" "yes") (const_string "yes")] (const_string "no"))) ;; true for compact instructions (those with _s suffix) ;; "maybe" means compact unless we conditionalize the insn. (define_attr "iscompact" "true,maybe,true_limm,maybe_limm,false" (cond [(eq_attr "type" "sfunc") (const_string "maybe")] (const_string "false"))) ; Is there an instruction that we are actually putting into the delay slot? (define_attr "delay_slot_filled" "no,yes" (cond [(match_test "NEXT_INSN (PREV_INSN (insn)) == insn") (const_string "no") (match_test "!TARGET_AT_DBR_CONDEXEC && JUMP_P (insn) && INSN_ANNULLED_BRANCH_P (insn) && !INSN_FROM_TARGET_P (NEXT_INSN (insn))") (const_string "no")] (const_string "yes"))) ; Is a delay slot present for purposes of shorten_branches? ; We have to take the length of this insn into account for forward branches ; even if we don't put the insn actually into a delay slot. (define_attr "delay_slot_present" "no,yes" (cond [(match_test "NEXT_INSN (PREV_INSN (insn)) == insn") (const_string "no")] (const_string "yes"))) ; We can't use get_attr_length (NEXT_INSN (insn)) because this gives the ; length of a different insn with the same uid. (define_attr "delay_slot_length" "" (cond [(match_test "NEXT_INSN (PREV_INSN (insn)) == insn") (const_int 0)] (symbol_ref "get_attr_length (NEXT_INSN (PREV_INSN (insn))) - get_attr_length (insn)"))) ; for ARCv2 we need to disable/enable different instruction alternatives (define_attr "cpu_facility" "std,av1,av2,fpx,cd" (const_string "std")) ; We should consider all the instructions enabled until otherwise (define_attr "enabled" "no,yes" (cond [(and (eq_attr "cpu_facility" "av1") (match_test "TARGET_V2")) (const_string "no") (and (eq_attr "cpu_facility" "av2") (not (match_test "TARGET_V2"))) (const_string "no") (and (eq_attr "cpu_facility" "fpx") (match_test "TARGET_FP_DP_AX")) (const_string "no") (and (eq_attr "cpu_facility" "cd") (not (and (match_test "TARGET_V2") (match_test "TARGET_CODE_DENSITY")))) (const_string "no") ] (const_string "yes"))) (define_attr "predicable" "no,yes" (const_string "no")) ;; if 'predicable' were not so brain-dead, we would specify: ;; (cond [(eq_attr "cond" "!canuse") (const_string "no") ;; (eq_attr "iscompact" "maybe") (const_string "no")] ;; (const_string "yes")) ;; and then for everything but calls, we could just set the cond attribute. ;; Condition codes: this one is used by final_prescan_insn to speed up ;; conditionalizing instructions. It saves having to scan the rtl to see if ;; it uses or alters the condition codes. ;; USE: This insn uses the condition codes (eg: a conditional branch). ;; CANUSE: This insn can use the condition codes (for conditional execution). ;; SET: All condition codes are set by this insn. ;; SET_ZN: the Z and N flags are set by this insn. ;; SET_ZNC: the Z, N, and C flags are set by this insn. ;; CLOB: The condition codes are set to unknown values by this insn. ;; NOCOND: This insn can't use and doesn't affect the condition codes. (define_attr "cond" "use,canuse,canuse_limm,canuse_limm_add,set,set_zn,clob,nocond" (cond [(and (eq_attr "predicable" "yes") (eq_attr "is_sfunc" "no") (eq_attr "delay_slot_filled" "no")) (const_string "canuse") (eq_attr "type" "call") (cond [(eq_attr "delay_slot_filled" "yes") (const_string "nocond") (match_test "!flag_pic") (const_string "canuse_limm")] (const_string "nocond")) (eq_attr "iscompact" "maybe,false") (cond [ (and (eq_attr "type" "move") (match_operand 1 "immediate_operand" "")) (if_then_else (ior (match_operand 1 "u6_immediate_operand" "") (match_operand 1 "long_immediate_operand" "")) (const_string "canuse") (const_string "canuse_limm")) (eq_attr "type" "binary") (cond [(ne (symbol_ref "REGNO (operands[0])") (symbol_ref "REGNO (operands[1])")) (const_string "nocond") (match_operand 2 "register_operand" "") (const_string "canuse") (match_operand 2 "u6_immediate_operand" "") (const_string "canuse") (match_operand 2 "long_immediate_operand" "") (const_string "canuse") (match_operand 2 "const_int_operand" "") (const_string "canuse_limm")] (const_string "nocond")) (eq_attr "type" "compare") (const_string "set") (eq_attr "type" "cmove,branch") (const_string "use") (eq_attr "is_sfunc" "yes") (cond [(match_test "(TARGET_MEDIUM_CALLS && !TARGET_LONG_CALLS_SET && flag_pic)") (const_string "canuse_limm_add") (match_test "(TARGET_MEDIUM_CALLS && !TARGET_LONG_CALLS_SET)") (const_string "canuse_limm")] (const_string "canuse")) ] (const_string "nocond"))] (cond [(eq_attr "type" "compare") (const_string "set") (eq_attr "type" "cmove,branch") (const_string "use") ] (const_string "nocond")))) /* ??? Having all these patterns gives ifcvt more freedom to generate inefficient code. It seem to operate on the premise that register-register copies and registers are free. I see better code with -fno-if-convert now than without. */ (define_cond_exec [(match_operator 0 "proper_comparison_operator" [(reg CC_REG) (const_int 0)])] "true" "") ;; Length (in # of bytes, long immediate constants counted too). ;; ??? There's a nasty interaction between the conditional execution fsm ;; and insn lengths: insns with shimm values cannot be conditionally executed. (define_attr "length" "" (cond [(eq_attr "iscompact" "true") (const_int 2) (eq_attr "iscompact" "maybe") (cond [(eq_attr "type" "sfunc") (cond [(match_test "GET_CODE (PATTERN (insn)) == COND_EXEC") (const_int 12)] (const_int 10)) (match_test "GET_CODE (PATTERN (insn)) == COND_EXEC") (const_int 4) (match_test "find_reg_note (insn, REG_SAVE_NOTE, GEN_INT (1))") (const_int 4)] (const_int 2)) (eq_attr "iscompact" "true_limm") (const_int 6) (eq_attr "iscompact" "maybe_limm") (cond [(match_test "GET_CODE (PATTERN (insn)) == COND_EXEC") (const_int 8)] (const_int 6)) (eq_attr "type" "load") (if_then_else (match_operand 1 "long_immediate_loadstore_operand" "") (const_int 8) (const_int 4)) (eq_attr "type" "store") (if_then_else (ior (match_operand 0 "long_immediate_loadstore_operand" "") (match_operand 1 "immediate_operand" "")) (const_int 8) (const_int 4)) (eq_attr "type" "move,unary") (cond [(match_operand 1 "u6_immediate_operand" "") (const_int 4) (match_operand 1 "register_operand" "") (const_int 4) (match_operand 1 "long_immediate_operand" "") (const_int 8) (match_test "GET_CODE (PATTERN (insn)) == COND_EXEC") (const_int 8)] (const_int 4)) (and (eq_attr "type" "shift") (match_operand 1 "immediate_operand")) (const_int 8) (eq_attr "type" "binary,shift") (if_then_else (ior (match_operand 2 "long_immediate_operand" "") (and (ne (symbol_ref "REGNO (operands[0])") (symbol_ref "REGNO (operands[1])")) (eq (match_operand 2 "u6_immediate_operand" "") (const_int 0)))) (const_int 8) (const_int 4)) (eq_attr "type" "cmove") (if_then_else (match_operand 1 "register_operand" "") (const_int 4) (const_int 8)) (eq_attr "type" "call_no_delay_slot") (const_int 8) ] (const_int 4)) ) ;; The length here is the length of a single asm. Unfortunately it might be ;; 4 or 8 so we must allow for 8. That's ok though. How often will users ;; lament asm's not being put in delay slots? ;; (define_asm_attributes [(set_attr "length" "8") (set_attr "type" "multi") (set_attr "cond" "clob") ]) ;; Delay slots. ;; The first two cond clauses and the default are necessary for correctness; ;; the remaining cond clause is mainly an optimization, as otherwise nops ;; would be inserted; however, if we didn't do this optimization, we would ;; have to be more conservative in our length calculations. (define_attr "in_delay_slot" "false,true" (cond [(eq_attr "type" "uncond_branch,jump,branch, call,sfunc,call_no_delay_slot, brcc, brcc_no_delay_slot,loop_setup,loop_end") (const_string "false") (match_test "arc_write_ext_corereg (insn)") (const_string "false") (gt (symbol_ref "arc_hazard (prev_active_insn (insn), next_active_insn (insn))") (symbol_ref "(arc_hazard (prev_active_insn (insn), insn) + arc_hazard (insn, next_active_insn (insn)))")) (const_string "false") (match_test "find_reg_note (insn, REG_SAVE_NOTE, GEN_INT (2))") (const_string "false") (eq_attr "iscompact" "maybe") (const_string "true") ] (if_then_else (eq_attr "length" "2,4") (const_string "true") (const_string "false")))) ; must not put an insn inside that refers to blink. (define_attr "in_call_delay_slot" "false,true" (cond [(eq_attr "in_delay_slot" "false") (const_string "false") (match_test "arc_regno_use_in (RETURN_ADDR_REGNUM, PATTERN (insn))") (const_string "false")] (const_string "true"))) (define_attr "in_sfunc_delay_slot" "false,true" (cond [(eq_attr "in_call_delay_slot" "false") (const_string "false") (match_test "arc_regno_use_in (12, PATTERN (insn))") (const_string "false")] (const_string "true"))) ;; Instructions that we can put into a delay slot and conditionalize. (define_attr "cond_delay_insn" "no,yes" (cond [(eq_attr "cond" "!canuse") (const_string "no") (eq_attr "type" "call,branch,uncond_branch,jump,brcc") (const_string "no") (match_test "find_reg_note (insn, REG_SAVE_NOTE, GEN_INT (2))") (const_string "no") (eq_attr "length" "2,4") (const_string "yes")] (const_string "no"))) (define_attr "in_ret_delay_slot" "no,yes" (cond [(eq_attr "in_delay_slot" "false") (const_string "no") (match_test "regno_clobbered_p (RETURN_ADDR_REGNUM, insn, SImode, 1)") (const_string "no")] (const_string "yes"))) (define_attr "cond_ret_delay_insn" "no,yes" (cond [(eq_attr "in_ret_delay_slot" "no") (const_string "no") (eq_attr "cond_delay_insn" "no") (const_string "no")] (const_string "yes"))) (define_attr "annul_ret_delay_insn" "no,yes" (cond [(eq_attr "cond_ret_delay_insn" "yes") (const_string "yes") (match_test "TARGET_AT_DBR_CONDEXEC") (const_string "no") (eq_attr "type" "!call,branch,uncond_branch,jump,brcc,return,sfunc") (const_string "yes")] (const_string "no"))) ;; Delay slot definition for ARCompact ISA ;; ??? FIXME: ;; When outputting an annul-true insn elegible for cond-exec ;; in a cbranch delay slot, unless optimizing for size, we use cond-exec ;; for ARC600; we could also use this for ARC700 if the branch can't be ;; unaligned and is at least somewhat likely (add parameter for this). (define_delay (eq_attr "type" "call") [(eq_attr "in_call_delay_slot" "true") (eq_attr "in_call_delay_slot" "true") (nil)]) (define_delay (and (match_test "!TARGET_AT_DBR_CONDEXEC") (eq_attr "type" "brcc")) [(eq_attr "in_delay_slot" "true") (eq_attr "in_delay_slot" "true") (nil)]) (define_delay (and (match_test "TARGET_AT_DBR_CONDEXEC") (eq_attr "type" "brcc")) [(eq_attr "in_delay_slot" "true") (nil) (nil)]) (define_delay (eq_attr "type" "return") [(eq_attr "in_ret_delay_slot" "yes") (eq_attr "annul_ret_delay_insn" "yes") (eq_attr "cond_ret_delay_insn" "yes")]) (define_delay (eq_attr "type" "loop_end") [(eq_attr "in_delay_slot" "true") (eq_attr "in_delay_slot" "true") (nil)]) ;; For ARC600, unexposing the delay sloy incurs a penalty also in the ;; non-taken case, so the only meaningful way to have an annull-true ;; filled delay slot is to conditionalize the delay slot insn. (define_delay (and (match_test "TARGET_AT_DBR_CONDEXEC") (eq_attr "type" "branch,uncond_branch,jump") (match_test "!optimize_size")) [(eq_attr "in_delay_slot" "true") (eq_attr "cond_delay_insn" "yes") (eq_attr "cond_delay_insn" "yes")]) ;; For ARC700, anything goes for annulled-true insns, since there is no ;; penalty for the unexposed delay slot when the branch is not taken, ;; however, we must avoid things that have a delay slot themselvese to ;; avoid confusing gcc. (define_delay (and (match_test "!TARGET_AT_DBR_CONDEXEC") (eq_attr "type" "branch,uncond_branch,jump") (match_test "!optimize_size")) [(eq_attr "in_delay_slot" "true") (eq_attr "type" "!call,branch,uncond_branch,jump,brcc,return,sfunc") (eq_attr "cond_delay_insn" "yes")]) ;; -mlongcall -fpic sfuncs use r12 to load the function address (define_delay (eq_attr "type" "sfunc") [(eq_attr "in_sfunc_delay_slot" "true") (eq_attr "in_sfunc_delay_slot" "true") (nil)]) ;; ??? need to use a working strategy for canuse_limm: ;; - either canuse_limm is not eligible for delay slots, and has no ;; delay slots, or arc_reorg has to treat them as nocond, or it has to ;; somehow modify them to become inelegible for delay slots if a decision ;; is made that makes conditional execution required. (define_attr "tune" "none,arc600,arc7xx,arc700_4_2_std,arc700_4_2_xmac, \ core_3, archs4x, archs4xd, archs4xd_slow" (const (cond [(symbol_ref "arc_tune == TUNE_ARC600") (const_string "arc600") (symbol_ref "arc_tune == ARC_TUNE_ARC7XX") (const_string "arc7xx") (symbol_ref "arc_tune == TUNE_ARC700_4_2_STD") (const_string "arc700_4_2_std") (symbol_ref "arc_tune == TUNE_ARC700_4_2_XMAC") (const_string "arc700_4_2_xmac") (symbol_ref "arc_tune == ARC_TUNE_CORE_3") (const_string "core_3") (symbol_ref "arc_tune == TUNE_ARCHS4X") (const_string "archs4x") (ior (symbol_ref "arc_tune == TUNE_ARCHS4XD") (symbol_ref "arc_tune == TUNE_ARCHS4XD_SLOW")) (const_string "archs4xd")] (const_string "none")))) (define_attr "tune_arc700" "false,true" (if_then_else (eq_attr "tune" "arc7xx, arc700_4_2_std, arc700_4_2_xmac") (const_string "true") (const_string "false"))) (define_attr "tune_dspmpy" "none, slow, fast" (const (cond [(ior (symbol_ref "arc_tune == TUNE_ARCHS4X") (symbol_ref "arc_tune == TUNE_ARCHS4XD")) (const_string "fast") (symbol_ref "arc_tune == TUNE_ARCHS4XD_SLOW") (const_string "slow")] (const_string "none")))) ;; Move instructions. (define_expand "movqi" [(set (match_operand:QI 0 "move_dest_operand" "") (match_operand:QI 1 "general_operand" ""))] "" "if (prepare_move_operands (operands, QImode)) DONE;") ; In order to allow the ccfsm machinery to do its work, the leading compact ; alternatives say 'canuse' - there is another alternative that will match ; when the condition codes are used. ; Rcq won't match if the condition is actually used; to avoid a spurious match ; via q, q is inactivated as constraint there. ; Likewise, the length of an alternative that might be shifted to conditional ; execution must reflect this, lest out-of-range branches are created. ; The iscompact attribute allows the epilogue expander to know for which ; insns it should lengthen the return insn. (define_insn "*movqi_insn" [(set (match_operand:QI 0 "move_dest_operand" "=Rcq,Rcq#q, w,Rcq#q, h, w, w,???w,h, w,Rcq, S,!*x, r,r, Ucm,m,???m, m,Usc") (match_operand:QI 1 "move_src_operand" " cL, cP,Rcq#q, P,hCm1,cL, I,?Rac,i,?i, T,Rcq,Usd,Ucm,m,?Rac,c,?Rac,Cm3,i"))] "register_operand (operands[0], QImode) || register_operand (operands[1], QImode) || (satisfies_constraint_Cm3 (operands[1]) && memory_operand (operands[0], QImode))" "@ mov%? %0,%1%& mov%? %0,%1%& mov%? %0,%1%& mov%? %0,%1%& mov%? %0,%1%& mov%? %0,%1 mov%? %0,%1 mov%? %0,%1 mov%? %0,%1 mov%? %0,%1 ldb%? %0,%1%& stb%? %1,%0%& ldb%? %0,%1%& xldb%U1 %0,%1 ldb%U1%V1 %0,%1 xstb%U0 %1,%0 stb%U0%V0 %1,%0 stb%U0%V0 %1,%0 stb%U0%V0 %1,%0 stb%U0%V0 %1,%0" [(set_attr "type" "move,move,move,move,move,move,move,move,move,move,load,store,load,load,load,store,store,store,store,store") (set_attr "iscompact" "maybe,maybe,maybe,true,true,false,false,false,maybe_limm,false,true,true,true,false,false,false,false,false,false,false") (set_attr "predicable" "yes,no,yes,no,no,yes,no,yes,yes,yes,no,no,no,no,no,no,no,no,no,no") (set_attr "cpu_facility" "av1,av1,av1,av2,av2,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*")]) (define_expand "movhi" [(set (match_operand:HI 0 "move_dest_operand" "") (match_operand:HI 1 "general_operand" ""))] "" "if (prepare_move_operands (operands, HImode)) DONE;") (define_insn "*movhi_insn" [(set (match_operand:HI 0 "move_dest_operand" "=Rcq,Rcq#q, w,Rcq#q, h, w, w,???w,Rcq#q,h, w,Rcq, S, r,r, Ucm,m,???m, m,VUsc") (match_operand:HI 1 "move_src_operand" " cL, cP,Rcq#q, P,hCm1,cL, I,?Rac, i,i,?i, T,Rcq,Ucm,m,?Rac,c,?Rac,Cm3,i"))] "register_operand (operands[0], HImode) || register_operand (operands[1], HImode) || (CONSTANT_P (operands[1]) /* Don't use a LIMM that we could load with a single insn - we loose delay-slot filling opportunities. */ && !satisfies_constraint_I (operands[1]) && satisfies_constraint_Usc (operands[0])) || (satisfies_constraint_Cm3 (operands[1]) && memory_operand (operands[0], HImode))" "@ mov%? %0,%1%& mov%? %0,%1%& mov%? %0,%1%& mov%? %0,%1%& mov%? %0,%1%& mov%? %0,%1 mov%? %0,%1 mov%? %0,%1 mov%? %0,%1%& mov%? %0,%1 mov%? %0,%1 ld%_%? %0,%1%& st%_%? %1,%0%& xld%_%U1 %0,%1 ld%_%U1%V1 %0,%1 xst%_%U0 %1,%0 st%_%U0%V0 %1,%0 st%_%U0%V0 %1,%0 st%_%U0%V0 %1,%0 st%_%U0%V0 %1,%0" [(set_attr "type" "move,move,move,move,move,move,move,move,move,move,move,load,store,load,load,store,store,store,store,store") (set_attr "iscompact" "maybe,maybe,maybe,true,true,false,false,false,maybe_limm,maybe_limm,false,true,true,false,false,false,false,false,false,false") (set_attr "predicable" "yes,no,yes,no,no,yes,no,yes,yes,yes,yes,no,no,no,no,no,no,no,no,no") (set_attr "cpu_facility" "av1,av1,av1,av2,av2,*,*,*,*,*,*,*,*,*,*,*,*,*,av2,*")]) (define_expand "movsi" [(set (match_operand:SI 0 "move_dest_operand" "") (match_operand:SI 1 "general_operand" ""))] "" "if (prepare_move_operands (operands, SImode)) DONE;") ; In order to allow the ccfsm machinery to do its work, the leading compact ; alternatives say 'canuse' - there is another alternative that will match ; when the condition codes are used. ; The length of an alternative that might be shifted to conditional ; execution must reflect this, lest out-of-range branches are created. ; the iscompact attribute allows the epilogue expander to know for which ; insns it should lengthen the return insn. (define_insn_and_split "*movsi_insn" ; 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [(set (match_operand:SI 0 "move_dest_operand" "=q, q,r,q, h, rl,r, r, r, r, ?r, r, q, h, rl, q, S, Us<,RcqRck,!*x, r,!*Rsd,!*Rcd,r,Ucm, Usd,m, m,VUsc") (match_operand:SI 1 "move_src_operand" "rL,rP,q,P,hCm1,rLl,I,Clo,Chi,Cbi,Cpc,Clb,Cax,Cal,Cal,Uts,Rcq,RcqRck, Us>,Usd,Ucm, Usd, Ucd,m, r,!*Rzd,r,Cm3, C32"))] "register_operand (operands[0], SImode) || register_operand (operands[1], SImode) || (CONSTANT_P (operands[1]) && (!satisfies_constraint_I (operands[1]) || !optimize_size) && satisfies_constraint_Usc (operands[0])) || (satisfies_constraint_Cm3 (operands[1]) && memory_operand (operands[0], SImode))" "@ mov%?\\t%0,%1 ;0 mov%?\\t%0,%1 ;1 mov%?\\t%0,%1 ;2 mov%?\\t%0,%1 ;3 mov%?\\t%0,%1 ;4 mov%?\\t%0,%1 ;5 mov%?\\t%0,%1 ;6 movl.cl\\t%0,%1 ;7 movh.cl\\t%0,%L1>>16 ;8 * return INTVAL (operands[1]) & 0xffffff ? \"movbi.cl\\t%0,%1 >> %p1,%p1,8;9\" : \"movbi.cl\\t%0,%L1 >> 24,24,8;9\"; add\\t%0,%1 ;10 add\\t%0,pcl,%1@pcl ;11 # mov%?\\t%0,%j1 ;13 mov%?\\t%0,%j1 ;14 ld%?\\t%0,%1 ;15 st%?\\t%1,%0 ;16 * return arc_short_long (insn, \"push%?\\t%1%&\", \"st%U0\\t%1,%0%&\"); * return arc_short_long (insn, \"pop%?\\t%0%&\", \"ld%U1\\t%0,%1%&\"); ld%?\\t%0,%1 ;19 xld%U1\\t%0,%1 ;20 ld%?\\t%0,%1 ;21 ld%?\\t%0,%1 ;22 ld%U1%V1\\t%0,%1 ;23 xst%U0\\t%1,%0 ;24 st%?\\t%1,%0%& ;25 st%U0%V0\\t%1,%0 ;26 st%U0%V0\\t%1,%0 ;37 st%U0%V0\\t%1,%0 ;28" "reload_completed && GET_CODE (PATTERN (insn)) != COND_EXEC && register_operand (operands[0], SImode) && IN_RANGE (REGNO (operands[0]) ^ 4, 4, 11) && satisfies_constraint_Cax (operands[1])" [(const_int 0)] " arc_split_mov_const (operands); DONE; " ; 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [(set_attr "type" "move, move, move,move,move, move, move,shift,shift,shift,binary,binary,multi,move, move,load,store,store,load,load, load,load,load, load,store,store,store,store,store") (set_attr "iscompact" "maybe,maybe,maybe,true,true,false,false,false,false,false, false, false,false,true,false,true, true, true,true,true,false,true,true,false,false, true,false,false,false") (set_attr "length" "*,*,*,*,*,4,4,4,4,4,8,8,*,6,*,*,*,*,*,*,4,*,4,*,*,*,*,*,8") (set_attr "predicable" "yes,no,yes,no,no,yes,no,no,no,yes,no,no,no,yes,yes,no,no,no,no,no,no,no,no,no,no,no,no,no,no") (set_attr "cpu_facility" "av1,av1,av1,av2,av2,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,av2,av2,*,*,av2,*,av2,*")]) ;; Sometimes generated by the epilogue code. We don't want to ;; recognize these addresses in general, because the limm is costly, ;; and we can't use them for stores. */ (define_insn "*movsi_pre_mod" [(set (match_operand:SI 0 "register_operand" "=w") (mem:SI (pre_modify (reg:SI SP_REG) (plus:SI (reg:SI SP_REG) (match_operand 1 "immediate_operand" "Cal")))))] "reload_completed" "ld.a %0,[sp,%1]" [(set_attr "type" "load") (set_attr "length" "8")]) ;; Store a value to directly to memory. The location might also be cached. ;; Since the cached copy can cause a write-back at unpredictable times, ;; we first write cached, then we write uncached. (define_insn "store_direct" [(set (match_operand:SI 0 "move_dest_operand" "=m") (unspec:SI [(match_operand:SI 1 "register_operand" "c")] UNSPEC_ARC_DIRECT))] "" "st%U0 %1,%0\;st%U0.di %1,%0" [(set_attr "type" "store")]) ;; Combiner patterns for compare with zero (define_mode_iterator SQH [QI HI]) (define_mode_attr SQH_postfix [(QI "b") (HI "%_")]) (define_code_iterator SEZ [sign_extend zero_extend]) (define_code_attr SEZ_prefix [(sign_extend "sex") (zero_extend "ext")]) ; Optab prefix for sign/zero-extending operations (define_code_attr su_optab [(sign_extend "") (zero_extend "u")]) (define_insn "*xt_cmp0_noout" [(set (match_operand 0 "cc_set_register" "") (compare:CC_ZN (SEZ:SI (match_operand:SQH 1 "register_operand" "r")) (const_int 0)))] "" ".f\\t0,%1" [(set_attr "type" "compare") (set_attr "cond" "set_zn")]) (define_insn "*xt_cmp0" [(set (match_operand 0 "cc_set_register" "") (compare:CC_ZN (SEZ:SI (match_operand:SQH 1 "register_operand" "r")) (const_int 0))) (set (match_operand:SI 2 "register_operand" "=r") (SEZ:SI (match_dup 1)))] "" ".f\\t%2,%1" [(set_attr "type" "compare") (set_attr "cond" "set_zn")]) (define_insn "*xbfu_cmp0_noout" [(set (match_operand 0 "cc_set_register" "") (compare:CC_Z (zero_extract:SI (match_operand:SI 1 "register_operand" " r,r") (match_operand:SI 2 "const_int_operand" "C3p,n") (match_operand:SI 3 "const_int_operand" " n,n")) (const_int 0)))] "TARGET_HS && TARGET_BARREL_SHIFTER" { int assemble_op2 = (((INTVAL (operands[2]) - 1) & 0x1f) << 5) | (INTVAL (operands[3]) & 0x1f); operands[2] = GEN_INT (assemble_op2); return "xbfu%?.f\\t0,%1,%2"; } [(set_attr "type" "shift") (set_attr "iscompact" "false") (set_attr "length" "4,8") (set_attr "predicable" "no") (set_attr "cond" "set_zn")]) (define_insn "*xbfu_cmp0" [(set (match_operand 4 "cc_set_register" "") (compare:CC_Z (zero_extract:SI (match_operand:SI 1 "register_operand" "0 ,r,0") (match_operand:SI 2 "const_int_operand" "C3p,n,n") (match_operand:SI 3 "const_int_operand" "n ,n,n")) (const_int 0))) (set (match_operand:SI 0 "register_operand" "=r,r,r") (zero_extract:SI (match_dup 1) (match_dup 2) (match_dup 3)))] "TARGET_HS && TARGET_BARREL_SHIFTER" { int assemble_op2 = (((INTVAL (operands[2]) - 1) & 0x1f) << 5) | (INTVAL (operands[3]) & 0x1f); operands[2] = GEN_INT (assemble_op2); return "xbfu%?.f\\t%0,%1,%2"; } [(set_attr "type" "shift") (set_attr "iscompact" "false") (set_attr "length" "4,8,8") (set_attr "predicable" "yes,no,yes") (set_attr "cond" "set_zn")]) ; splitting to 'tst' allows short insns and combination into brcc. (define_insn_and_split "*movsi_set_cc_insn" [(set (match_operand 2 "cc_set_register" "") (match_operator 3 "zn_compare_operator" [(match_operand:SI 1 "nonmemory_operand" "rL,rI,Cal") (const_int 0)])) (set (match_operand:SI 0 "register_operand" "=r,r,r") (match_dup 1))] "" "mov%?.f\\t%0,%1" "reload_completed && operands_match_p (operands[0], operands[1])" [(set (match_dup 2) (match_dup 3))] "" [(set_attr "type" "compare") (set_attr "predicable" "yes,no,yes") (set_attr "cond" "set_zn") (set_attr "length" "4,4,8")]) (define_insn "unary_comparison" [(set (match_operand:CC_ZN 0 "cc_set_register" "") (match_operator:CC_ZN 3 "zn_compare_operator" [(match_operator:SI 2 "unary_operator" [(match_operand:SI 1 "register_operand" "c")]) (const_int 0)]))] "" "%O2.f 0,%1" [(set_attr "type" "compare") (set_attr "cond" "set_zn")]) ; this pattern is needed by combiner for cases like if (c=(~b)) { ... } (define_insn "*unary_comparison_result_used" [(set (match_operand 2 "cc_register" "") (match_operator 4 "zn_compare_operator" [(match_operator:SI 3 "unary_operator" [(match_operand:SI 1 "register_operand" "c")]) (const_int 0)])) (set (match_operand:SI 0 "register_operand" "=w") (match_dup 3))] "" "%O3.f %0,%1" [(set_attr "type" "compare") (set_attr "cond" "set_zn") (set_attr "length" "4")]) ; reload is too stingy with reloads for Rrq/Cbf/Rrq when it sees ; a c/???Cal/X alternative, so we say it's c/???Cal/c instead, ; even if we don't need the clobber. (define_insn_and_split "*tst_movb" [(set (match_operand 0 "cc_register" "") (match_operator 4 "zn_compare_operator" [(and:SI (match_operand:SI 1 "register_operand" "%Rcq,Rcq, c, c, c, c,Rrq,Rrq, c") (match_operand:SI 2 "nonmemory_operand" "Rcq,C0p,cI,C1p,Ccp,Chs,Cbf,Cbf,???Cal")) (const_int 0)])) (clobber (match_scratch:SI 3 "=X,X,X,X,X,X,Rrq,1,c"))] "TARGET_NPS_BITOPS" "movb.f.cl %3,%1,%p2,%p2,%s2" "TARGET_NPS_BITOPS && reload_completed && (extract_constrain_insn_cached (insn), (which_alternative & ~1) != 6)" [(set (match_dup 0) (match_dup 4))]) (define_insn "*tst" [(set (match_operand 0 "cc_register" "") (match_operator 3 "zn_compare_operator" [(and:SI (match_operand:SI 1 "register_operand" "%Rcq,Rcq, c, c, c, c, c, c") (match_operand:SI 2 "nonmemory_operand" " Rcq,C0p,cI,cL,C1p,Ccp,Chs,Cal")) (const_int 0)]))] "reload_completed || !satisfies_constraint_Cbf (operands[2]) || satisfies_constraint_C0p (operands[2]) || satisfies_constraint_I (operands[2]) || satisfies_constraint_C1p (operands[2]) || satisfies_constraint_Chs (operands[2])" "* switch (which_alternative) { case 0: case 2: case 3: case 7: return \"tst%? %1,%2\"; case 1: return \"btst%? %1,%z2\"; case 4: return \"bmsk%?.f 0,%1,%Z2%&\"; case 5: return \"bclr%?.f 0,%1,%M2%&\"; case 6: return \"asr.f 0,%1,%p2\"; default: gcc_unreachable (); } " [(set_attr "iscompact" "maybe,maybe,false,false,false,false,false,false") (set_attr "type" "compare,compare,compare,compare,compare,compare,binary,compare") (set_attr "length" "*,*,4,4,4,4,4,8") (set_attr "predicable" "no,yes,no,yes,no,no,no,yes") (set_attr "cond" "set_zn")]) ; ??? Sometimes, if an AND with a constant can be expressed as a zero_extract, ; combine will do that and not try the AND. ; It would take 66 constraint combinations to describe the zero_extract ; constants that are covered by the 12-bit signed constant for tst ; (excluding the ones that are better done by mov or btst). ; so we rather use an extra pattern for tst; ; since this is about constants, reload shouldn't care. (define_insn "*tst_bitfield_tst" [(set (match_operand:CC_ZN 0 "cc_set_register" "") (match_operator 4 "zn_compare_operator" [(zero_extract:SI (match_operand:SI 1 "register_operand" "c") (match_operand:SI 2 "const_int_operand" "n") (match_operand:SI 3 "const_int_operand" "n")) (const_int 0)]))] "INTVAL (operands[2]) > 1 && (INTVAL (operands[3]) + INTVAL (operands[2]) <= 11 || (INTVAL (operands[3]) <= 11 && INTVAL (operands[3]) + INTVAL (operands[2]) == 32))" "tst %1,((1<<%2)-1)<<%3" [(set_attr "type" "compare") (set_attr "cond" "set_zn") (set_attr "length" "4")]) ; Likewise for asr.f. (define_insn "*tst_bitfield_asr" [(set (match_operand:CC_ZN 0 "cc_set_register" "") (match_operator 4 "zn_compare_operator" [(zero_extract:SI (match_operand:SI 1 "register_operand" "c") (match_operand:SI 2 "const_int_operand" "n") (match_operand:SI 3 "const_int_operand" "n")) (const_int 0)]))] "INTVAL (operands[2]) > 1 && INTVAL (operands[3]) + INTVAL (operands[2]) == 32" "asr.f 0,%1,%3" [(set_attr "type" "shift") (set_attr "cond" "set_zn") (set_attr "length" "4")]) (define_insn "*tst_bitfield" [(set (match_operand:CC_ZN 0 "cc_set_register" "") (match_operator 5 "zn_compare_operator" [(zero_extract:SI (match_operand:SI 1 "register_operand" "%Rcqq,c, c,Rrq,c") (match_operand:SI 2 "const_int_operand" "N,N, n,Cbn,n") (match_operand:SI 3 "const_int_operand" "n,n,C_0,Cbn,n")) (const_int 0)])) (clobber (match_scratch:SI 4 "=X,X,X,Rrq,X"))] "" "@ btst%? %1,%3 btst %1,%3 bmsk.f 0,%1,%2-1 movb.f.cl %4,%1,%3,%3,%2 and.f 0,%1,((1<<%2)-1)<<%3" [(set_attr "iscompact" "maybe,false,false,false,false") (set_attr "type" "compare,compare,compare,shift,compare") (set_attr "cond" "set_zn") (set_attr "length" "*,4,4,4,8")]) ;; The next two patterns are for plos, ior, xor, and, and mult. (define_insn "*commutative_binary_cmp0_noout" [(set (match_operand 0 "cc_set_register" "") (match_operator 4 "zn_compare_operator" [(match_operator:SI 3 "commutative_operator" [(match_operand:SI 1 "register_operand" "%r,r") (match_operand:SI 2 "nonmemory_operand" "rL,Cal")]) (const_int 0)]))] "" "%O3.f\\t0,%1,%2" [(set_attr "type" "compare") (set_attr "cond" "set_zn") (set_attr "length" "4,8")]) (define_insn "*commutative_binary_cmp0" [(set (match_operand 3 "cc_set_register" "") (match_operator 5 "zn_compare_operator" [(match_operator:SI 4 "commutative_operator" [(match_operand:SI 1 "register_operand" "%0, 0,r,r") (match_operand:SI 2 "nonmemory_operand" "rL,rI,r,Cal")]) (const_int 0)])) (set (match_operand:SI 0 "register_operand" "=r,r,r,r") (match_dup 4))] "" "%O4.f\\t%0,%1,%2" [(set_attr "type" "compare") (set_attr "cond" "set_zn") (set_attr "predicable" "yes,yes,no,no") (set_attr "length" "4,4,4,8")]) ; for flag setting 'add' instructions like if (a+b) { ...} ; the combiner needs this pattern (define_insn "*addsi_compare" [(set (reg:CC_ZN CC_REG) (compare:CC_ZN (match_operand:SI 0 "register_operand" "c") (neg:SI (match_operand:SI 1 "register_operand" "c"))))] "" "add.f 0,%0,%1" [(set_attr "cond" "set") (set_attr "type" "compare") (set_attr "length" "4")]) ; for flag setting 'add' instructions like if (a+b < a) { ...} ; the combiner needs this pattern (define_insn "addsi_compare_2" [(set (reg:CC_C CC_REG) (compare:CC_C (plus:SI (match_operand:SI 0 "register_operand" "c,c") (match_operand:SI 1 "nonmemory_operand" "cL,Cal")) (match_dup 0)))] "" "add.f 0,%0,%1" [(set_attr "cond" "set") (set_attr "type" "compare") (set_attr "length" "4,8")]) (define_insn "*addsi_compare_3" [(set (reg:CC_C CC_REG) (compare:CC_C (plus:SI (match_operand:SI 0 "register_operand" "c") (match_operand:SI 1 "register_operand" "c")) (match_dup 1)))] "" "add.f 0,%0,%1" [(set_attr "cond" "set") (set_attr "type" "compare") (set_attr "length" "4")]) ; this pattern is needed by combiner for cases like if (c=a+b) { ... } (define_insn "*commutative_binary_comparison_result_used" [(set (match_operand 3 "cc_register" "") (match_operator 5 "zn_compare_operator" ; We can accept any commutative operator except mult because ; our 'w' class below could try to use LP_COUNT. [(match_operator:SI 4 "commutative_operator_sans_mult" [(match_operand:SI 1 "register_operand" "c,0,c") (match_operand:SI 2 "nonmemory_operand" "cL,I,?Cal")]) (const_int 0)])) (set (match_operand:SI 0 "register_operand" "=w,w,w") (match_dup 4))] "" "%O4.f %0,%1,%2 ; non-mult commutative" [(set_attr "type" "compare,compare,compare") (set_attr "cond" "set_zn,set_zn,set_zn") (set_attr "length" "4,4,8")]) ; a MULT-specific version of this pattern to avoid touching the ; LP_COUNT register (define_insn "*commutative_binary_mult_comparison_result_used" [(set (match_operand 3 "cc_register" "") (match_operator 5 "zn_compare_operator" [(match_operator:SI 4 "mult_operator" [(match_operand:SI 1 "register_operand" "c,0,c") (match_operand:SI 2 "nonmemory_operand" "cL,I,?Cal")]) (const_int 0)])) ; Make sure to use the W class to not touch LP_COUNT. (set (match_operand:SI 0 "register_operand" "=W,W,W") (match_dup 4))] "!TARGET_ARC600_FAMILY" "%O4.f %0,%1,%2 ; mult commutative" [(set_attr "type" "compare,compare,compare") (set_attr "cond" "set_zn,set_zn,set_zn") (set_attr "length" "4,4,8")]) (define_insn "*noncommutative_binary_cmp0" [(set (match_operand 3 "cc_set_register" "") (match_operator 5 "zn_compare_operator" [(match_operator:SI 4 "noncommutative_operator" [(match_operand:SI 1 "register_operand" "0,r,0, 0,r") (match_operand:SI 2 "nonmemory_operand" "rL,r,I,Cal,Cal")]) (const_int 0)])) (set (match_operand:SI 0 "register_operand" "=r,r,r,r,r") (match_dup 4))] "" "%O4%?.f\\t%0,%1,%2" [(set_attr "type" "compare") (set_attr "cond" "set_zn") (set_attr "predicable" "yes,no,no,yes,no") (set_attr "length" "4,4,4,8,8")]) (define_insn "*noncommutative_binary_cmp0_noout" [(set (match_operand 0 "cc_set_register" "") (match_operator 3 "zn_compare_operator" [(match_operator:SI 4 "noncommutative_operator" [(match_operand:SI 1 "register_operand" "r,r") (match_operand:SI 2 "nonmemory_operand" "rL,Cal")]) (const_int 0)]))] "" "%O4.f\\t0,%1,%2" [(set_attr "type" "compare") (set_attr "cond" "set_zn") (set_attr "length" "4,8")]) ;;rsub variants (define_insn "*rsub_cmp0" [(set (match_operand 4 "cc_set_register" "") (match_operator 3 "zn_compare_operator" [(minus:SI (match_operand:SI 1 "nonmemory_operand" "rL,Cal") (match_operand:SI 2 "register_operand" "r,r")) (const_int 0)])) (set (match_operand:SI 0 "register_operand" "=r,r") (minus:SI (match_dup 1) (match_dup 2)))] "" "rsub.f\\t%0,%2,%1" [(set_attr "type" "compare") (set_attr "cond" "set_zn") (set_attr "length" "4,8")]) (define_insn "*rsub_cmp0_noout" [(set (match_operand 0 "cc_set_register" "") (match_operator 3 "zn_compare_operator" [(minus:SI (match_operand:SI 1 "nonmemory_operand" "rL,Cal") (match_operand:SI 2 "register_operand" "r,r")) (const_int 0)]))] "" "rsub.f\\t0,%2,%1" [(set_attr "type" "compare") (set_attr "cond" "set_zn") (set_attr "length" "4,8")]) (define_expand "bic_f_zn" [(parallel [(set (reg:CC_ZN CC_REG) (compare:CC_ZN (and:SI (match_operand:SI 1 "register_operand" "") (not:SI (match_operand:SI 2 "nonmemory_operand" ""))) (const_int 0))) (set (match_operand:SI 0 "register_operand" "") (and:SI (match_dup 1) (not:SI (match_dup 2))))])] "") (define_insn "*bic_f" [(set (match_operand 3 "cc_set_register" "") (match_operator 4 "zn_compare_operator" [(and:SI (match_operand:SI 1 "register_operand" "c,0,c") (not:SI (match_operand:SI 2 "nonmemory_operand" "cL,I,?Cal"))) (const_int 0)])) (set (match_operand:SI 0 "register_operand" "=w,w,w") (and:SI (match_dup 1) (not:SI (match_dup 2))))] "" "bic.f %0,%1,%2" [(set_attr "type" "compare,compare,compare") (set_attr "cond" "set_zn,set_zn,set_zn") (set_attr "length" "4,4,8")]) (define_insn "*bic_cmp0_noout" [(set (match_operand 0 "cc_set_register" "") (compare:CC_ZN (and:SI (not:SI (match_operand:SI 1 "nonmemory_operand" "Lr,Cal,r")) (match_operand:SI 2 "nonmemory_operand" "r,r,Cal")) (const_int 0)))] "register_operand (operands[1], SImode) || register_operand (operands[2], SImode)" "bic.f\\t0,%2,%1" [(set_attr "type" "unary") (set_attr "cond" "set_zn") (set_attr "length" "4,8,8")]) (define_insn "*bic_cmp0" [(set (match_operand 0 "cc_set_register" "") (compare:CC_ZN (and:SI (not:SI (match_operand:SI 1 "nonmemory_operand" "Lr,Cal,r")) (match_operand:SI 2 "nonmemory_operand" "r,r,Cal")) (const_int 0))) (set (match_operand:SI 3 "register_operand" "=r,r,r") (and:SI (not:SI (match_dup 1)) (match_dup 2)))] "register_operand (operands[1], SImode) || register_operand (operands[2], SImode)" "bic.f\\t%3,%2,%1" [(set_attr "type" "unary") (set_attr "cond" "set_zn") (set_attr "length" "4,8,8")]) (define_expand "movdi" [(set (match_operand:DI 0 "move_dest_operand" "") (match_operand:DI 1 "general_operand" ""))] "" " if (prepare_move_operands (operands, DImode)) DONE; ") (define_insn_and_split "*movdi_insn" [(set (match_operand:DI 0 "move_dest_operand" "=r, r,r, m") (match_operand:DI 1 "move_double_src_operand" "r,Hi,m,rCm3"))] "register_operand (operands[0], DImode) || register_operand (operands[1], DImode) || (satisfies_constraint_Cm3 (operands[1]) && memory_operand (operands[0], DImode))" "@ vadd2\\t%0,%1,0 # ldd%U1%V1\\t%0,%1 std%U0%V0\\t%1,%0" "&& reload_completed && arc_split_move_p (operands)" [(const_int 0)] { arc_split_move (operands); DONE; } [(set_attr "type" "move,move,load,store") (set_attr "length" "8,16,16,16")]) ;; Floating point move insns. (define_expand "movsf" [(set (match_operand:SF 0 "move_dest_operand" "") (match_operand:SF 1 "general_operand" ""))] "" "if (prepare_move_operands (operands, SFmode)) DONE;") (define_insn "*movsf_insn" [(set (match_operand:SF 0 "move_dest_operand" "=h,h, r,r, q,S,Usc,r,m") (match_operand:SF 1 "move_src_operand" "hCfZ,E,rCfZ,E,Uts,q, E,m,r"))] "register_operand (operands[0], SFmode) || register_operand (operands[1], SFmode)" "@ mov%?\\t%0,%1 mov%?\\t%0,%1 ; %A1 mov%?\\t%0,%1 mov%?\\t%0,%1 ; %A1 ld%?%U1\\t%0,%1 st%?\\t%1,%0 st%U0%V0\\t%1,%0 ld%U1%V1\\t%0,%1 st%U0%V0\\t%1,%0" [(set_attr "type" "move,move,move,move,load,store,store,load,store") (set_attr "predicable" "no,no,yes,yes,no,no,no,no,no") (set_attr "length" "*,*,4,*,*,*,*,*,*") (set_attr "iscompact" "true,true_limm,false,false,true,true,false,false,false")]) (define_expand "movdf" [(set (match_operand:DF 0 "move_dest_operand" "") (match_operand:DF 1 "general_operand" ""))] "" "if (prepare_move_operands (operands, DFmode)) DONE;") (define_insn_and_split "*movdf_insn" [(set (match_operand:DF 0 "move_dest_operand" "=D,r,r,r,r,m") (match_operand:DF 1 "move_double_src_operand" "r,D,r,E,m,r"))] "(register_operand (operands[0], DFmode) || register_operand (operands[1], DFmode))" "@ # # vadd2\\t%0,%1,0 # ldd%U1%V1\\t%0,%1 std%U0%V0\\t%1,%0" "&& reload_completed && arc_split_move_p (operands)" [(const_int 0)] { arc_split_move (operands); DONE; } [(set_attr "type" "move,move,move,move,load,store") (set_attr "length" "4,16,8,16,16,16")]) (define_insn_and_split "*movdf_insn_nolrsr" [(set (match_operand:DF 0 "register_operand" "=r") (match_operand:DF 1 "arc_double_register_operand" "D")) (use (match_operand:SI 2 "" "N")) ; aka const1_rtx ] "TARGET_DPFP && TARGET_DPFP_DISABLE_LRSR" "#" "&& 1" [ ; mov r0, 0 (set (match_dup 0) (match_dup 3)) ; daddh?? r1, r0, r0 (parallel [ (set (match_dup 1) (plus:DF (match_dup 1) (match_dup 0))) (use (const_int 1)) (use (const_int 1)) (use (match_dup 0)) ; used to block can_combine_p (set (match_dup 0) (plus:DF (match_dup 1) (match_dup 0))) ; r1 in op 0 ]) ; We have to do this twice, once to read the value into R0 and ; second time to put back the contents which the first DEXCLx ; will have overwritten ; dexcl2 r0, r1, r0 (parallel [ (set (match_dup 4) ; aka r0result ; aka DF, r1, r0 (unspec_volatile:SI [(match_dup 5) (match_dup 4)] VUNSPEC_ARC_DEXCL)) (clobber (match_dup 1)) ]) ; Generate the second, which makes sure operand5 and operand4 values ; are put back in the Dx register properly. (set (match_dup 1) (unspec_volatile:DF [(match_dup 5) (match_dup 4)] VUNSPEC_ARC_DEXCL_NORES)) ; Note: we cannot use a (clobber (match_scratch)) here because ; the combine pass will end up replacing uses of it with 0 ] "operands[3] = CONST0_RTX (DFmode); operands[4] = simplify_gen_subreg (SImode, operands[0], DFmode, 0); operands[5] = simplify_gen_subreg (SImode, operands[0], DFmode, 4);" [(set_attr "type" "move")]) ;; Load/Store with update instructions. ;; ;; Some of these we can get by using pre-decrement or pre-increment, but the ;; hardware can also do cases where the increment is not the size of the ;; object. ;; ;; In all these cases, we use operands 0 and 1 for the register being ;; incremented because those are the operands that local-alloc will ;; tie and these are the pair most likely to be tieable (and the ones ;; that will benefit the most). ;; ;; We use match_operator here because we need to know whether the memory ;; object is volatile or not. ;; Note: loadqi_update has no 16-bit variant (define_insn "*loadqi_update" [(set (match_operand:QI 3 "dest_reg_operand" "=r,r") (match_operator:QI 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0,0") (match_operand:SI 2 "nonmemory_operand" "rCm2,Cal"))])) (set (match_operand:SI 0 "dest_reg_operand" "=r,r") (plus:SI (match_dup 1) (match_dup 2)))] "" "ldb.a%V4 %3,[%0,%2]" [(set_attr "type" "load,load") (set_attr "length" "4,8")]) (define_insn "*load_zeroextendqisi_update" [(set (match_operand:SI 3 "dest_reg_operand" "=r,r") (zero_extend:SI (match_operator:QI 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0,0") (match_operand:SI 2 "nonmemory_operand" "rCm2,Cal"))]))) (set (match_operand:SI 0 "dest_reg_operand" "=r,r") (plus:SI (match_dup 1) (match_dup 2)))] "" "ldb.a%V4 %3,[%0,%2]" [(set_attr "type" "load,load") (set_attr "length" "4,8")]) (define_insn "*load_signextendqisi_update" [(set (match_operand:SI 3 "dest_reg_operand" "=r,r") (sign_extend:SI (match_operator:QI 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0,0") (match_operand:SI 2 "nonmemory_operand" "rCm2,Cal"))]))) (set (match_operand:SI 0 "dest_reg_operand" "=r,r") (plus:SI (match_dup 1) (match_dup 2)))] "" "ldb.x.a%V4 %3,[%0,%2]" [(set_attr "type" "load,load") (set_attr "length" "4,8")]) (define_insn "*storeqi_update" [(set (match_operator:QI 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0") (match_operand:SI 2 "short_immediate_operand" "I"))]) (match_operand:QI 3 "register_operand" "c")) (set (match_operand:SI 0 "dest_reg_operand" "=w") (plus:SI (match_dup 1) (match_dup 2)))] "" "stb.a%V4 %3,[%0,%2]" [(set_attr "type" "store") (set_attr "length" "4")]) ;; ??? pattern may have to be re-written ;; Note: no 16-bit variant for this pattern (define_insn "*loadhi_update" [(set (match_operand:HI 3 "dest_reg_operand" "=r,r") (match_operator:HI 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0,0") (match_operand:SI 2 "nonmemory_operand" "rCm2,Cal"))])) (set (match_operand:SI 0 "dest_reg_operand" "=w,w") (plus:SI (match_dup 1) (match_dup 2)))] "" "ld%_.a%V4 %3,[%0,%2]" [(set_attr "type" "load,load") (set_attr "length" "4,8")]) (define_insn "*load_zeroextendhisi_update" [(set (match_operand:SI 3 "dest_reg_operand" "=r,r") (zero_extend:SI (match_operator:HI 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0,0") (match_operand:SI 2 "nonmemory_operand" "rCm2,Cal"))]))) (set (match_operand:SI 0 "dest_reg_operand" "=r,r") (plus:SI (match_dup 1) (match_dup 2)))] "" "ld%_.a%V4 %3,[%0,%2]" [(set_attr "type" "load,load") (set_attr "length" "4,8")]) ;; Note: no 16-bit variant for this instruction (define_insn "*load_signextendhisi_update" [(set (match_operand:SI 3 "dest_reg_operand" "=r,r") (sign_extend:SI (match_operator:HI 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0,0") (match_operand:SI 2 "nonmemory_operand" "rCm2,Cal"))]))) (set (match_operand:SI 0 "dest_reg_operand" "=w,w") (plus:SI (match_dup 1) (match_dup 2)))] "" "ld%_.x.a%V4 %3,[%0,%2]" [(set_attr "type" "load,load") (set_attr "length" "4,8")]) (define_insn "*storehi_update" [(set (match_operator:HI 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0") (match_operand:SI 2 "short_immediate_operand" "I"))]) (match_operand:HI 3 "register_operand" "c")) (set (match_operand:SI 0 "dest_reg_operand" "=w") (plus:SI (match_dup 1) (match_dup 2)))] "" "st%_.a%V4 %3,[%0,%2]" [(set_attr "type" "store") (set_attr "length" "4")]) ;; No 16-bit variant for this instruction pattern (define_insn "*loadsi_update" [(set (match_operand:SI 3 "dest_reg_operand" "=r,r") (match_operator:SI 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0,0") (match_operand:SI 2 "nonmemory_operand" "rCm2,Cal"))])) (set (match_operand:SI 0 "dest_reg_operand" "=w,w") (plus:SI (match_dup 1) (match_dup 2)))] "" "ld.a%V4 %3,[%0,%2]" [(set_attr "type" "load,load") (set_attr "length" "4,8")]) (define_insn "*storesi_update" [(set (match_operator:SI 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0") (match_operand:SI 2 "short_immediate_operand" "I"))]) (match_operand:SI 3 "register_operand" "c")) (set (match_operand:SI 0 "dest_reg_operand" "=w") (plus:SI (match_dup 1) (match_dup 2)))] "" "st.a%V4 %3,[%0,%2]" [(set_attr "type" "store") (set_attr "length" "4")]) (define_insn "*loadsf_update" [(set (match_operand:SF 3 "dest_reg_operand" "=r,r") (match_operator:SF 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0,0") (match_operand:SI 2 "nonmemory_operand" "rCm2,Cal"))])) (set (match_operand:SI 0 "dest_reg_operand" "=w,w") (plus:SI (match_dup 1) (match_dup 2)))] "" "ld.a%V4 %3,[%0,%2]" [(set_attr "type" "load,load") (set_attr "length" "4,8")]) (define_insn "*storesf_update" [(set (match_operator:SF 4 "any_mem_operand" [(plus:SI (match_operand:SI 1 "register_operand" "0") (match_operand:SI 2 "short_immediate_operand" "I"))]) (match_operand:SF 3 "register_operand" "c")) (set (match_operand:SI 0 "dest_reg_operand" "=w") (plus:SI (match_dup 1) (match_dup 2)))] "" "st.a%V4 %3,[%0,%2]" [(set_attr "type" "store") (set_attr "length" "4")]) ;; Conditional move instructions. (define_expand "movsicc" [(set (match_operand:SI 0 "dest_reg_operand" "") (if_then_else:SI (match_operand 1 "comparison_operator" "") (match_operand:SI 2 "nonmemory_operand" "") (match_operand:SI 3 "register_operand" "")))] "" " operands[1] = gen_compare_reg (operands[1], VOIDmode); if (operands[1] == NULL_RTX) FAIL; ") (define_expand "movdicc" [(set (match_operand:DI 0 "dest_reg_operand" "") (if_then_else:DI(match_operand 1 "comparison_operator" "") (match_operand:DI 2 "nonmemory_operand" "") (match_operand:DI 3 "register_operand" "")))] "" " operands[1] = gen_compare_reg (operands[1], VOIDmode); if (operands[1] == NULL_RTX) FAIL; ") (define_expand "movsfcc" [(set (match_operand:SF 0 "dest_reg_operand" "") (if_then_else:SF (match_operand 1 "comparison_operator" "") (match_operand:SF 2 "nonmemory_operand" "") (match_operand:SF 3 "register_operand" "")))] "" " operands[1] = gen_compare_reg (operands[1], VOIDmode); if (operands[1] == NULL_RTX) FAIL; ") (define_expand "movdfcc" [(set (match_operand:DF 0 "dest_reg_operand" "") (if_then_else:DF (match_operand 1 "comparison_operator" "") (match_operand:DF 2 "nonmemory_operand" "") (match_operand:DF 3 "register_operand" "")))] "" " operands[1] = gen_compare_reg (operands[1], VOIDmode); if (operands[1] == NULL_RTX) FAIL; ") (define_insn "*movsicc_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=w,w") (if_then_else:SI (match_operator 3 "proper_comparison_operator" [(match_operand 4 "cc_register" "") (const_int 0)]) (match_operand:SI 1 "nonmemory_operand" "cL,Cal") (match_operand:SI 2 "register_operand" "0,0")))] "" { if (rtx_equal_p (operands[1], const0_rtx) && GET_CODE (operands[3]) == NE && satisfies_constraint_Rcq (operands[0])) return "sub%?.ne %0,%0,%0"; /* ??? might be good for speed on ARC600 too, *if* properly scheduled. */ if ((optimize_size && (!TARGET_ARC600_FAMILY)) && rtx_equal_p (operands[1], constm1_rtx) && GET_CODE (operands[3]) == LTU) return "sbc.cs %0,%0,%0"; return "mov.%d3 %0,%1"; } [(set_attr "type" "cmove,cmove") (set_attr "length" "4,8")]) ;; When there's a mask of a single bit, and then a compare to 0 or 1, ;; if the single bit is the sign bit, then GCC likes to convert this ;; into a sign extend and a compare less than, or greater to zero. ;; This is usually fine, except for the NXP400 where we have access to ;; a bit test instruction, along with a special short load instruction ;; (from CMEM), that doesn't support sign-extension on load. ;; ;; This peephole optimisation attempts to restore the use of bit-test ;; in those cases where it is useful to do so. (define_peephole2 [(set (match_operand:SI 0 "register_operand" "") (sign_extend:SI (match_operand:QI 1 "any_mem_operand" ""))) (set (reg:CC_ZN CC_REG) (compare:CC_ZN (match_dup 0) (const_int 0))) (set (pc) (if_then_else (match_operator 2 "ge_lt_comparison_operator" [(reg:CC_ZN CC_REG) (const_int 0)]) (match_operand 3 "" "") (match_operand 4 "" "")))] "TARGET_NPS_CMEM && cmem_address (XEXP (operands[1], 0), SImode) && peep2_reg_dead_p (2, operands[0]) && peep2_regno_dead_p (3, CC_REG)" [(set (match_dup 0) (zero_extend:SI (match_dup 1))) (set (reg:CC_ZN CC_REG) (compare:CC_ZN (zero_extract:SI (match_dup 0) (const_int 1) (const_int 7)) (const_int 0))) (set (pc) (if_then_else (match_dup 2) (match_dup 3) (match_dup 4)))] "if (GET_CODE (operands[2]) == GE) operands[2] = gen_rtx_EQ (VOIDmode, gen_rtx_REG (CC_ZNmode, 61), const0_rtx); else operands[2] = gen_rtx_NE (VOIDmode, gen_rtx_REG (CC_ZNmode, 61), const0_rtx);") ; Try to generate more short moves, and/or less limms, by substituting a ; conditional move with a conditional sub. (define_peephole2 [(set (match_operand:SI 0 "compact_register_operand") (match_operand:SI 1 "const_int_operand")) (set (match_dup 0) (if_then_else:SI (match_operator 3 "proper_comparison_operator" [(match_operand 4 "cc_register" "") (const_int 0)]) (match_operand:SI 2 "const_int_operand" "") (match_dup 0)))] "!satisfies_constraint_P (operands[1]) && satisfies_constraint_P (operands[2]) && UNSIGNED_INT6 (INTVAL (operands[2]) - INTVAL (operands[1]))" [(set (match_dup 0) (match_dup 2)) (cond_exec (match_dup 3) (set (match_dup 0) (plus:SI (match_dup 0) (match_dup 1))))] "operands[3] = gen_rtx_fmt_ee (REVERSE_CONDITION (GET_CODE (operands[3]), GET_MODE (operands[4])), VOIDmode, operands[4], const0_rtx); operands[1] = GEN_INT (INTVAL (operands[1]) - INTVAL (operands[2]));") (define_insn "*movdicc_insn" [(set (match_operand:DI 0 "dest_reg_operand" "=&w,w") (if_then_else:DI (match_operator 3 "proper_comparison_operator" [(match_operand 4 "cc_register" "") (const_int 0)]) (match_operand:DI 1 "nonmemory_operand" "c,i") (match_operand:DI 2 "register_operand" "0,0")))] "" "* { switch (which_alternative) { default: case 0 : /* We normally copy the low-numbered register first. However, if the first register operand 0 is the same as the second register of operand 1, we must copy in the opposite order. */ if (REGNO (operands[0]) == REGNO (operands[1]) + 1) return \"mov.%d3 %R0,%R1\;mov.%d3 %0,%1\"; else return \"mov.%d3 %0,%1\;mov.%d3 %R0,%R1\"; case 1 : return \"mov.%d3 %L0,%L1\;mov.%d3 %H0,%H1\"; } }" [(set_attr "type" "cmove,cmove") (set_attr "length" "8,16")]) (define_insn "*movsfcc_insn" [(set (match_operand:SF 0 "dest_reg_operand" "=w,w") (if_then_else:SF (match_operator 3 "proper_comparison_operator" [(match_operand 4 "cc_register" "") (const_int 0)]) (match_operand:SF 1 "nonmemory_operand" "c,E") (match_operand:SF 2 "register_operand" "0,0")))] "" "@ mov.%d3 %0,%1 mov.%d3 %0,%1 ; %A1" [(set_attr "type" "cmove,cmove")]) (define_insn "*movdfcc_insn" [(set (match_operand:DF 0 "dest_reg_operand" "=w,w") (if_then_else:DF (match_operator 1 "proper_comparison_operator" [(match_operand 4 "cc_register" "") (const_int 0)]) (match_operand:DF 2 "nonmemory_operand" "c,E") (match_operand:DF 3 "register_operand" "0,0")))] "" "* { switch (which_alternative) { default: case 0 : /* We normally copy the low-numbered register first. However, if the first register operand 0 is the same as the second register of operand 1, we must copy in the opposite order. */ if (REGNO (operands[0]) == REGNO (operands[2]) + 1) return \"mov.%d1 %R0,%R2\;mov.%d1 %0,%2\"; else return \"mov.%d1 %0,%2\;mov.%d1 %R0,%R2\"; case 1 : return \"mov.%d1 %L0,%L2\;mov.%d1 %H0,%H2; %A2 \"; } }" [(set_attr "type" "cmove,cmove") (set_attr "length" "8,16")]) ;; ------------------------------------------------------------------- ;; Sign/Zero extension ;; ------------------------------------------------------------------- (define_insn "*zero_extendqihi2_i" [(set (match_operand:HI 0 "dest_reg_operand" "=q,q,r,r,r,r") (zero_extend:HI (match_operand:QI 1 "nonvol_nonimm_operand" "0,q,0,r,Ucm,m")))] "" "@ extb%?\\t%0,%1 extb%?\\t%0,%1 bmsk%?\\t%0,%1,7 extb\\t%0,%1 xldb%U1\\t%0,%1 ldb%U1\\t%0,%1" [(set_attr "type" "unary,unary,unary,unary,load,load") (set_attr "iscompact" "maybe,true,false,false,false,false") (set_attr "predicable" "no,no,yes,no,no,no")]) (define_expand "zero_extendqihi2" [(set (match_operand:HI 0 "dest_reg_operand" "") (zero_extend:HI (match_operand:QI 1 "nonvol_nonimm_operand" "")))] "" "" ) (define_insn "*zero_extendqisi2_ac" [(set (match_operand:SI 0 "dest_reg_operand" "=q,q,r,r,q,!*x,r,r") (zero_extend:SI (match_operand:QI 1 "nonvol_nonimm_operand" "0,q,0,r,T,Usd,Ucm,m")))] "" "@ extb%?\\t%0,%1 extb%?\\t%0,%1 bmsk%?\\t%0,%1,7 extb\\t%0,%1 ldb%?\\t%0,%1 ldb%?\\t%0,%1 xldb%U1\\t%0,%1 ldb%U1\\t%0,%1" [(set_attr "type" "unary,unary,unary,unary,load,load,load,load") (set_attr "iscompact" "maybe,true,false,false,true,true,false,false") (set_attr "predicable" "no,no,yes,no,no,no,no,no")]) (define_expand "zero_extendqisi2" [(set (match_operand:SI 0 "dest_reg_operand" "") (zero_extend:SI (match_operand:QI 1 "nonvol_nonimm_operand" "")))] "" "" ) (define_insn "*zero_extendhisi2_i" [(set (match_operand:SI 0 "dest_reg_operand" "=q,q,r,r,!x,q,r,r") (zero_extend:SI (match_operand:HI 1 "nonvol_nonimm_operand" "0,q,0,r,Usd,T,Ucm,m")))] "" "@ ext%_%?\\t%0,%1 ext%_%?\\t%0,%1 bmsk%?\\t%0,%1,15 ext%_\\t%0,%1 ld%_%?\\t%0,%1 ld%_%?\\t%0,%1 xldw%U1\\t%0,%1 ld%_%U1%V1\\t%0,%1" [(set_attr "type" "unary,unary,unary,unary,load,load,load,load") (set_attr "iscompact" "maybe,true,false,false,true,true,false,false") (set_attr "predicable" "no,no,yes,no,no,no,no,no")]) (define_expand "zero_extendhisi2" [(set (match_operand:SI 0 "dest_reg_operand" "") (zero_extend:SI (match_operand:HI 1 "nonvol_nonimm_operand" "")))] "" "" ) ;; Sign extension instructions. (define_insn "*extendqihi2_i" [(set (match_operand:HI 0 "dest_reg_operand" "=q,r,r,r") (sign_extend:HI (match_operand:QI 1 "nonvol_nonimm_operand" "q,r,Uex,m")))] "" "@ sexb%?\\t%0,%1 sexb\\t%0,%1 ldb.x%U1\\t%0,%1 ldb.x%U1\\t%0,%1" [(set_attr "type" "unary,unary,load,load") (set_attr "iscompact" "true,false,false,false") (set_attr "length" "*,*,*,8")]) (define_expand "extendqihi2" [(set (match_operand:HI 0 "dest_reg_operand" "") (sign_extend:HI (match_operand:QI 1 "nonvol_nonimm_operand" "")))] "" "" ) (define_insn "*extendqisi2_ac" [(set (match_operand:SI 0 "dest_reg_operand" "=q,r,r,r") (sign_extend:SI (match_operand:QI 1 "nonvol_nonimm_operand" "q,r,Uex,m")))] "" "@ sexb%?\\t%0,%1 sexb\\t%0,%1 ldb.x%U1\\t%0,%1 ldb.x%U1\\t%0,%1" [(set_attr "type" "unary,unary,load,load") (set_attr "iscompact" "true,false,false,false") (set_attr "length" "*,*,*,8")]) (define_expand "extendqisi2" [(set (match_operand:SI 0 "dest_reg_operand" "") (sign_extend:SI (match_operand:QI 1 "nonvol_nonimm_operand" "")))] "" "" ) (define_insn "*extendhisi2_i" [(set (match_operand:SI 0 "dest_reg_operand" "=q,r,q,r,r") (sign_extend:SI (match_operand:HI 1 "nonvol_nonimm_operand" "q,r,Ucd,Uex,m")))] "" "@ sex%_%?\\t%0,%1 sex%_\\t%0,%1 ldh%?.x\\t%0,%1%& ld%_.x%U1%V1\\t%0,%1 ld%_.x%U1%V1\\t%0,%1" [(set_attr "type" "unary,unary,load,load,load") (set_attr "iscompact" "true,false,true,false,false") (set_attr "length" "*,*,*,4,8")]) (define_expand "extendhisi2" [(set (match_operand:SI 0 "dest_reg_operand" "") (sign_extend:SI (match_operand:HI 1 "nonvol_nonimm_operand" "")))] "" "" ) ;; Unary arithmetic insns ;; We allow constant operands to enable late constant propagation, but it is ;; not worth while to have more than one dedicated alternative to output them - ;; if we are really worried about getting these the maximum benefit of all ;; the available alternatives, we should add an extra pass to fold such ;; operations to movsi. ;; Absolute instructions (define_insn "abssi2" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcq#q,w,w") (abs:SI (match_operand:SI 1 "nonmemory_operand" "Rcq#q,cL,Cal")))] "" "abs%? %0,%1%&" [(set_attr "type" "two_cycle_core") (set_attr "length" "*,4,8") (set_attr "iscompact" "true,false,false")]) ;; Maximum and minimum insns (define_insn "smaxsi3" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcw, w, w") (smax:SI (match_operand:SI 1 "register_operand" "%0, c, c") (match_operand:SI 2 "nonmemory_operand" "cL,cL,Cal")))] "" "max%? %0,%1,%2" [(set_attr "type" "two_cycle_core") (set_attr "length" "4,4,8") (set_attr "predicable" "yes,no,no")] ) (define_insn "sminsi3" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcw, w, w") (smin:SI (match_operand:SI 1 "register_operand" "%0, c, c") (match_operand:SI 2 "nonmemory_operand" "cL,cL,Cal")))] "" "min%? %0,%1,%2" [(set_attr "type" "two_cycle_core") (set_attr "length" "4,4,8") (set_attr "predicable" "yes,no,no")] ) ;; Arithmetic instructions. ; We say an insn can be conditionalized if this doesn't introduce a long ; immediate. We set the type such that we still have good scheduling if the ; insn is conditionalized. ; ??? It would make sense to allow introduction of long immediates, but ; we'd need to communicate to the ccfsm machinery the extra cost. ; The alternatives in the constraints still serve three purposes: ; - estimate insn size assuming conditional execution ; - guide reload to re-order the second and third operand to get a better fit. ; - give tentative insn type to guide scheduling ; N.B. "%" for commutativity doesn't help when there is another matching ; (but longer) alternative. ; We avoid letting this pattern use LP_COUNT as a register by specifying ; register class 'W' instead of 'w'. (define_insn_and_split "*addsi3_mixed" ;; 0 1 2 3 4 5 6 7 8 9 a b c d e f 10 11 12 [(set (match_operand:SI 0 "dest_reg_operand" "=Rcq#q,Rcq, h,!*Rsd,Rcq,Rcb,Rcq, Rcqq,Rcqq,Rcw,Rcw, Rcw, W, W,W, W,Rcqq,Rcw, W") (plus:SI (match_operand:SI 1 "register_operand" "%0, c, 0, Rcqq, 0, 0,Rcb, Rcqq, 0, 0, c, 0, c, c,0, 0, 0, 0, c") (match_operand:SI 2 "nonmemory_operand" "cL, 0, Cm1, L,CL2,Csp,CM4,RcqqK, cO, cL, 0,cCca,cLCmL,Cca,I,C2a, Cal,Cal,Cal")))] "" { arc_output_addsi (operands, arc_ccfsm_cond_exec_p (), true); return ""; } "&& reload_completed && get_attr_length (insn) == 8 && satisfies_constraint_I (operands[2]) && GET_CODE (PATTERN (insn)) != COND_EXEC" [(set (match_dup 0) (match_dup 3)) (set (match_dup 0) (match_dup 4))] "split_addsi (operands);" [(set_attr "type" "*,*,*,*,two_cycle_core,two_cycle_core,*,*,*,*,*,two_cycle_core,*,two_cycle_core,*,two_cycle_core,*,*,*") (set (attr "iscompact") (cond [(match_test "~arc_output_addsi (operands, false, false) & 2") (const_string "false") (match_operand 2 "long_immediate_operand" "") (const_string "maybe_limm")] (const_string "maybe"))) (set_attr "length" "*,*,*,*,*,*,*,*,*,4,4,4,4,4,4,4,*,8,8") (set_attr "predicable" "no,no,no,no,no,no,no,no,no,yes,yes,yes,no,no,no,no,no,yes,no") (set_attr "cond" "canuse,nocond,nocond,nocond,canuse,canuse,nocond,nocond,nocond,canuse,canuse,canuse,nocond,nocond,canuse_limm,canuse_limm,canuse,canuse,nocond") ]) ;; ARCv2 MPYW and MPYUW (define_expand "mulhisi3" [(set (match_operand:SI 0 "register_operand" "") (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "")) (sign_extend:SI (match_operand:HI 2 "nonmemory_operand" ""))))] "TARGET_MPYW" "{ if (CONSTANT_P (operands[2])) { emit_insn (gen_mulhisi3_imm (operands[0], operands[1], operands[2])); DONE; } }" ) (define_insn "mulhisi3_imm" [(set (match_operand:SI 0 "register_operand" "=r,r,r, r, r") (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "0,r,0, 0, r")) (match_operand:HI 2 "short_const_int_operand" "L,L,I,C16,C16")))] "TARGET_MPYW" "mpyw%? %0,%1,%2" [(set_attr "length" "4,4,4,8,8") (set_attr "iscompact" "false") (set_attr "type" "mul16_em") (set_attr "predicable" "yes,no,no,yes,no") (set_attr "cond" "canuse,nocond,nocond,canuse_limm,nocond") ]) (define_insn "mulhisi3_reg" [(set (match_operand:SI 0 "register_operand" "=Rcqq,r,r") (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" " 0,0,r")) (sign_extend:SI (match_operand:HI 2 "nonmemory_operand" "Rcqq,r,r"))))] "TARGET_MPYW" "mpyw%? %0,%1,%2" [(set_attr "length" "*,4,4") (set_attr "iscompact" "maybe,false,false") (set_attr "type" "mul16_em") (set_attr "predicable" "yes,yes,no") (set_attr "cond" "canuse,canuse,nocond") ]) (define_expand "umulhisi3" [(set (match_operand:SI 0 "register_operand" "") (mult:SI (zero_extend:SI (match_operand:HI 1 "register_operand" "")) (zero_extend:SI (match_operand:HI 2 "arc_short_operand" ""))))] "TARGET_MPYW" "{ if (CONSTANT_P (operands[2])) { emit_insn (gen_umulhisi3_imm (operands[0], operands[1], operands[2])); DONE; } }" ) (define_insn "umulhisi3_imm" [(set (match_operand:SI 0 "register_operand" "=r, r, r, r, r") (mult:SI (zero_extend:SI (match_operand:HI 1 "register_operand" "%0, r, 0, 0, r")) (match_operand:HI 2 "short_unsigned_const_operand" " L, L,J12,J16,J16")))] "TARGET_MPYW" "mpyuw%? %0,%1,%2" [(set_attr "length" "4,4,4,8,8") (set_attr "iscompact" "false") (set_attr "type" "mul16_em") (set_attr "predicable" "yes,no,no,yes,no") (set_attr "cond" "canuse,nocond,nocond,canuse_limm,nocond") ]) (define_insn "umulhisi3_reg" [(set (match_operand:SI 0 "register_operand" "=Rcqq, r, r") (mult:SI (zero_extend:SI (match_operand:HI 1 "register_operand" " %0, 0, r")) (zero_extend:SI (match_operand:HI 2 "register_operand" " Rcqq, r, r"))))] "TARGET_MPYW" "mpyuw%? %0,%1,%2" [(set_attr "length" "*,4,4") (set_attr "iscompact" "maybe,false,false") (set_attr "type" "mul16_em") (set_attr "predicable" "yes,yes,no") (set_attr "cond" "canuse,canuse,nocond") ]) ;; ARC700/ARC600/V2 multiply ;; SI <- SI * SI (define_expand "mulsi3" [(set (match_operand:SI 0 "register_operand" "") (mult:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "nonmemory_operand" "")))] "TARGET_ANY_MPY" { if (TARGET_MUL64_SET) { emit_insn (gen_mulsi64 (operands[0], operands[1], operands[2])); DONE; } else if (TARGET_MULMAC_32BY16_SET) { emit_insn (gen_mulsi32x16 (operands[0], operands[1], operands[2])); DONE; } }) (define_insn_and_split "mulsi32x16" [(set (match_operand:SI 0 "register_operand" "=w") (mult:SI (match_operand:SI 1 "register_operand" "%c") (match_operand:SI 2 "nonmemory_operand" "ci"))) (clobber (reg:DI MUL32x16_REG))] "TARGET_MULMAC_32BY16_SET" "#" "TARGET_MULMAC_32BY16_SET && reload_completed" [(const_int 0)] { if (immediate_operand (operands[2], SImode) && INTVAL (operands[2]) >= 0 && INTVAL (operands[2]) <= 65535) { emit_insn (gen_umul_600 (operands[1], operands[2], gen_acc2 (), gen_acc1 ())); emit_move_insn (operands[0], gen_acc2 ()); DONE; } emit_insn (gen_umul_600 (operands[1], operands[2], gen_acc2 (), gen_acc1 ())); emit_insn (gen_mac_600 (operands[1], operands[2], gen_acc2 (), gen_acc1 ())); emit_move_insn (operands[0], gen_acc2 ()); DONE; } [(set_attr "type" "multi") (set_attr "length" "8")]) ; mululw conditional execution without a LIMM clobbers an input register; ; we'd need a different pattern to describe this. ; To make the conditional execution valid for the LIMM alternative, we ; have to emit the LIMM before the register operand. (define_insn "umul_600" [(set (match_operand:SI 2 "acc2_operand" "") (mult:SI (match_operand:SI 0 "register_operand" "c,c,c") (zero_extract:SI (match_operand:SI 1 "nonmemory_operand" "c,L,Cal") (const_int 16) (const_int 0)))) (clobber (match_operand:SI 3 "acc1_operand" ""))] "TARGET_MULMAC_32BY16_SET" "mululw 0, %0, %1" [(set_attr "length" "4,4,8") (set_attr "type" "mulmac_600") (set_attr "predicable" "no") (set_attr "cond" "nocond")]) (define_insn "mac_600" [(set (match_operand:SI 2 "acc2_operand" "") (plus:SI (mult:SI (match_operand:SI 0 "register_operand" "c,c,c") (ashift:SI (zero_extract:SI (match_operand:SI 1 "nonmemory_operand" "c,L,Cal") (const_int 16) (const_int 16)) (const_int 16))) (match_dup 2))) (clobber (match_operand:SI 3 "acc1_operand" ""))] "TARGET_MULMAC_32BY16_SET" "machlw%? 0, %0, %1" [(set_attr "length" "4,4,8") (set_attr "type" "mulmac_600, mulmac_600, mulmac_600") (set_attr "predicable" "no, no, yes") (set_attr "cond" "nocond, canuse_limm, canuse")]) ; The gcc-internal representation may differ from the hardware ; register number in order to allow the generic code to correctly ; split the concatenation of mhi and mlo. (define_insn_and_split "mulsi64" [(set (match_operand:SI 0 "register_operand" "=w") (mult:SI (match_operand:SI 1 "register_operand" "%c") (match_operand:SI 2 "nonmemory_operand" "ci"))) (clobber (reg:DI MUL64_OUT_REG))] "TARGET_MUL64_SET" "#" "TARGET_MUL64_SET && reload_completed" [(const_int 0)] { rtx mhi = gen_rtx_REG (SImode, R59_REG); rtx mlo = gen_rtx_REG (SImode, R58_REG); emit_insn (gen_mulsi_600 (operands[1], operands[2], mlo, mhi)); emit_move_insn (operands[0], mlo); DONE; } [(set_attr "type" "multi") (set_attr "length" "8")]) (define_insn "mulsi_600" [(set (match_operand:SI 2 "mlo_operand" "") (mult:SI (match_operand:SI 0 "register_operand" "%Rcq#q,c,c,c") (match_operand:SI 1 "nonmemory_operand" "Rcq#q,cL,I,Cal"))) (clobber (match_operand:SI 3 "mhi_operand" ""))] "TARGET_MUL64_SET" "mul64%?\\t0,%0,%1" [(set_attr "length" "*,4,4,8") (set_attr "iscompact" "maybe,false,false,false") (set_attr "type" "multi,multi,multi,multi") (set_attr "predicable" "yes,yes,no,yes") (set_attr "cond" "canuse,canuse,canuse_limm,canuse")]) (define_insn_and_split "mulsidi_600" [(set (match_operand:DI 0 "register_operand" "=r,r, r") (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "%r,r, r")) (sign_extend:DI (match_operand:SI 2 "nonmemory_operand" "rL,L,C32")))) (clobber (reg:DI R58_REG))] "TARGET_MUL64_SET" "#" "TARGET_MUL64_SET && reload_completed" [(const_int 0)] { int hi = !TARGET_BIG_ENDIAN; int lo = !hi; rtx lr = operand_subword (operands[0], lo, 0, DImode); rtx hr = operand_subword (operands[0], hi, 0, DImode); emit_insn (gen_mul64 (operands[1], operands[2])); emit_move_insn (lr, gen_rtx_REG (SImode, R58_REG)); emit_move_insn (hr, gen_rtx_REG (SImode, R59_REG)); DONE; } [(set_attr "type" "multi") (set_attr "length" "4,4,8")]) (define_insn "mul64" [(set (reg:DI MUL64_OUT_REG) (mult:DI (sign_extend:DI (match_operand:SI 0 "register_operand" "%Rcq#q, c,c, c")) (sign_extend:DI (match_operand:SI 1 "nonmemory_operand" "Rcq#q,cL,L,C32"))))] "TARGET_MUL64_SET" "mul64%? \t0, %0, %1%&" [(set_attr "length" "*,4,4,8") (set_attr "iscompact" "maybe,false,false,false") (set_attr "type" "multi,multi,multi,multi") (set_attr "predicable" "yes,yes,no,yes") (set_attr "cond" "canuse,canuse,canuse_limm,canuse")]) (define_insn_and_split "umulsidi_600" [(set (match_operand:DI 0 "register_operand" "=r,r, r") (mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" "%r,r, r")) (zero_extend:DI (match_operand:SI 2 "nonmemory_operand" "rL,L,C32")))) (clobber (reg:DI R58_REG))] "TARGET_MUL64_SET" "#" "TARGET_MUL64_SET && reload_completed" [(const_int 0)] { int hi = !TARGET_BIG_ENDIAN; int lo = !hi; rtx lr = operand_subword (operands[0], lo, 0, DImode); rtx hr = operand_subword (operands[0], hi, 0, DImode); emit_insn (gen_mulu64 (operands[1], operands[2])); emit_move_insn (lr, gen_rtx_REG (SImode, R58_REG)); emit_move_insn (hr, gen_rtx_REG (SImode, R59_REG)); DONE; } [(set_attr "type" "umulti") (set_attr "length" "4,4,8")]) (define_insn "mulu64" [(set (reg:DI MUL64_OUT_REG) (mult:DI (zero_extend:DI (match_operand:SI 0 "register_operand" "%c,c,c")) (zero_extend:DI (match_operand:SI 1 "nonmemory_operand" "cL,L,C32"))))] "TARGET_MUL64_SET" "mulu64%? \t0, %0, %1%&" [(set_attr "length" "4,4,8") (set_attr "iscompact" "false") (set_attr "type" "umulti") (set_attr "predicable" "yes,no,yes") (set_attr "cond" "canuse,canuse_limm,canuse")]) ; ARC700 mpy* instructions: This is a multi-cycle extension, and thus 'w' ; may not be used as destination constraint. ; The result of mpy and mpyu is the same except for flag setting (if enabled), ; but mpyu is faster for the standard multiplier. ; Note: we must make sure LP_COUNT is not one of the destination ; registers, since it cannot be the destination of a multi-cycle insn ; like MPY or MPYU. (define_insn "mulsi3_700" [(set (match_operand:SI 0 "mpy_dest_reg_operand" "=Rcr,r,r,Rcr,r") (mult:SI (match_operand:SI 1 "register_operand" "%0,c,0,0,c") (match_operand:SI 2 "nonmemory_operand" "cL,cL,I,Cal,Cal")))] "TARGET_ARC700_MPY" "mpyu%? %0,%1,%2" [(set_attr "length" "4,4,4,8,8") (set_attr "type" "umulti") (set_attr "predicable" "yes,no,no,yes,no") (set_attr "cond" "canuse,nocond,canuse_limm,canuse,nocond")]) ; ARCv2 has no penalties between mpy and mpyu. So, we use mpy because of its ; short variant. LP_COUNT constraints are still valid. (define_insn "mulsi3_v2" [(set (match_operand:SI 0 "mpy_dest_reg_operand" "=q,q, r, r,r, r, r") (mult:SI (match_operand:SI 1 "register_operand" "%0,q, 0, r,0, 0, c") (match_operand:SI 2 "nonmemory_operand" "q,0,rL,rL,I,Cal,Cal")))] "TARGET_MULTI" "@ mpy%?\\t%0,%1,%2 mpy%?\\t%0,%2,%1 mpy%?\\t%0,%1,%2 mpy%?\\t%0,%1,%2 mpy%?\\t%0,%1,%2 mpy%?\\t%0,%1,%2 mpy%?\\t%0,%1,%2" [(set_attr "length" "*,*,4,4,4,8,8") (set_attr "iscompact" "maybe,maybe,false,false,false,false,false") (set_attr "type" "umulti") (set_attr "predicable" "no,no,yes,no,no,yes,no") (set_attr "cond" "nocond,nocond,canuse,nocond,canuse_limm,canuse,nocond")]) (define_expand "mulsidi3" [(set (match_operand:DI 0 "register_operand" "") (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "")) (sign_extend:DI (match_operand:SI 2 "nonmemory_operand" ""))))] "TARGET_ANY_MPY" { if (TARGET_PLUS_MACD) { if (CONST_INT_P (operands[2])) { emit_insn (gen_mpyd_imm_arcv2hs (operands[0], operands[1], operands[2])); } else { emit_insn (gen_mpyd_arcv2hs (operands[0], operands[1], operands[2])); } DONE; } if (TARGET_MPY) { operands[2] = force_reg (SImode, operands[2]); if (!register_operand (operands[0], DImode)) { rtx result = gen_reg_rtx (DImode); operands[2] = force_reg (SImode, operands[2]); emit_insn (gen_mulsidi3 (result, operands[1], operands[2])); emit_move_insn (operands[0], result); DONE; } } else if (TARGET_MUL64_SET) { emit_insn (gen_mulsidi_600 (operands[0], operands[1], operands[2])); DONE; } else if (TARGET_MULMAC_32BY16_SET) { operands[2] = force_reg (SImode, operands[2]); emit_insn (gen_mulsidi64 (operands[0], operands[1], operands[2])); DONE; } operands[2] = force_reg (SImode, operands[2]); }) (define_insn_and_split "mulsidi64" [(set (match_operand:DI 0 "register_operand" "=w") (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "%c")) (sign_extend:DI (match_operand:SI 2 "extend_operand" "ci")))) (clobber (reg:DI MUL32x16_REG))] "TARGET_MULMAC_32BY16_SET" "#" "TARGET_MULMAC_32BY16_SET && reload_completed" [(const_int 0)] { rtx result_hi = gen_highpart (SImode, operands[0]); rtx result_low = gen_lowpart (SImode, operands[0]); emit_insn (gen_mul64_600 (operands[1], operands[2])); emit_insn (gen_mac64_600 (result_hi, operands[1], operands[2])); emit_move_insn (result_low, gen_acc2 ()); DONE; } [(set_attr "type" "multi") (set_attr "length" "8")]) (define_insn "mul64_600" [(set (reg:DI MUL32x16_REG) (mult:DI (sign_extend:DI (match_operand:SI 0 "register_operand" "c,c,c")) (zero_extract:DI (match_operand:SI 1 "nonmemory_operand" "c,L,Cal") (const_int 16) (const_int 0)))) ] "TARGET_MULMAC_32BY16_SET" "mullw%? 0, %0, %1" [(set_attr "length" "4,4,8") (set_attr "type" "mulmac_600") (set_attr "predicable" "no,no,yes") (set_attr "cond" "nocond, canuse_limm, canuse")]) ;; ??? check if this is canonical rtl (define_insn "mac64_600" [(set (reg:DI MUL32x16_REG) (plus:DI (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "c,c,c")) (ashift:DI (sign_extract:DI (match_operand:SI 2 "nonmemory_operand" "c,L,Cal") (const_int 16) (const_int 16)) (const_int 16))) (reg:DI MUL32x16_REG))) (set (match_operand:SI 0 "register_operand" "=w,w,w") (zero_extract:SI (plus:DI (mult:DI (sign_extend:DI (match_dup 1)) (ashift:DI (sign_extract:DI (match_dup 2) (const_int 16) (const_int 16)) (const_int 16))) (reg:DI MUL32x16_REG)) (const_int 32) (const_int 32)))] "TARGET_MULMAC_32BY16_SET" "machlw%? %0, %1, %2" [(set_attr "length" "4,4,8") (set_attr "type" "mulmac_600") (set_attr "predicable" "no,no,yes") (set_attr "cond" "nocond, canuse_limm, canuse")]) ;; DI <- DI(signed SI) * DI(signed SI) (define_insn_and_split "mulsidi3_700" [(set (match_operand:DI 0 "register_operand" "=&r") (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "%c")) (sign_extend:DI (match_operand:SI 2 "extend_operand" "cL"))))] "TARGET_MPY && !TARGET_PLUS_MACD" "#" "&& reload_completed" [(const_int 0)] { int hi = TARGET_BIG_ENDIAN ? 0 : UNITS_PER_WORD; int lo = TARGET_BIG_ENDIAN ? UNITS_PER_WORD : 0; rtx l0 = simplify_gen_subreg (word_mode, operands[0], DImode, lo); rtx h0 = simplify_gen_subreg (word_mode, operands[0], DImode, hi); emit_insn (gen_mulsi3_highpart (h0, operands[1], operands[2])); emit_insn (gen_mulsi3 (l0, operands[1], operands[2])); DONE; } [(set_attr "type" "multi") (set_attr "length" "8")]) (define_insn "mulsi3_highpart" [(set (match_operand:SI 0 "register_operand" "=Rcr,r,Rcr,r") (truncate:SI (lshiftrt:DI (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "%0,c, 0,c")) (sign_extend:DI (match_operand:SI 2 "extend_operand" "c,c, i,i"))) (const_int 32))))] "TARGET_MPY" "mpy%+%? %0,%1,%2" [(set_attr "length" "4,4,8,8") (set_attr "type" "multi") (set_attr "predicable" "yes,no,yes,no") (set_attr "cond" "canuse,nocond,canuse,nocond")]) ; Note that mpyhu has the same latency as mpy / mpyh, ; thus we use the type multi. (define_insn "*umulsi3_highpart_i" [(set (match_operand:SI 0 "register_operand" "=Rcr,r,Rcr,r") (truncate:SI (lshiftrt:DI (mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" "%0,c, 0,c")) (zero_extend:DI (match_operand:SI 2 "extend_operand" "c,c, i,i"))) (const_int 32))))] "TARGET_MPY" "mpy%+u%? %0,%1,%2" [(set_attr "length" "4,4,8,8") (set_attr "type" "multi") (set_attr "predicable" "yes,no,yes,no") (set_attr "cond" "canuse,nocond,canuse,nocond")]) ;; (zero_extend:DI (const_int)) leads to internal errors in combine, so we ;; need a separate pattern for immediates ;; ??? This is fine for combine, but not for reload. (define_insn "umulsi3_highpart_int" [(set (match_operand:SI 0 "register_operand" "=Rcr, r, r,Rcr, r") (truncate:SI (lshiftrt:DI (mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" " 0, c, 0, 0, c")) (match_operand:DI 2 "immediate_usidi_operand" "L, L, I, Cal, Cal")) (const_int 32))))] "TARGET_MPY" "mpy%+u%? %0,%1,%2" [(set_attr "length" "4,4,4,8,8") (set_attr "type" "multi") (set_attr "predicable" "yes,no,no,yes,no") (set_attr "cond" "canuse,nocond,canuse_limm,canuse,nocond")]) (define_expand "umulsi3_highpart" [(set (match_operand:SI 0 "general_operand" "") (truncate:SI (lshiftrt:DI (mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" "")) (zero_extend:DI (match_operand:SI 2 "nonmemory_operand" ""))) (const_int 32))))] "TARGET_MPY" " { rtx target = operands[0]; if (!register_operand (target, SImode)) target = gen_reg_rtx (SImode); if (CONST_INT_P (operands[2]) && INTVAL (operands[2]) < 0) operands[2] = simplify_const_unary_operation (ZERO_EXTEND, DImode, operands[2], SImode); else if (!immediate_operand (operands[2], SImode)) operands[2] = gen_rtx_ZERO_EXTEND (DImode, operands[2]); emit_insn (gen_umulsi3_highpart_int (target, operands[1], operands[2])); if (target != operands[0]) emit_move_insn (operands[0], target); DONE; }") (define_expand "umulsidi3" [(set (match_operand:DI 0 "register_operand" "") (mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" "")) (zero_extend:DI (match_operand:SI 2 "nonmemory_operand" ""))))] "TARGET_ANY_MPY" { if (TARGET_PLUS_MACD) { if (CONST_INT_P (operands[2])) { emit_insn (gen_mpydu_imm_arcv2hs (operands[0], operands[1], operands[2])); } else { emit_insn (gen_mpydu_arcv2hs (operands[0], operands[1], operands[2])); } DONE; } if (TARGET_MPY) { operands[2] = force_reg (SImode, operands[2]); if (!register_operand (operands[0], DImode)) { rtx result = gen_reg_rtx (DImode); emit_insn (gen_umulsidi3 (result, operands[1], operands[2])); emit_move_insn (operands[0], result); DONE; } } else if (TARGET_MUL64_SET) { operands[2] = force_reg (SImode, operands[2]); emit_insn (gen_umulsidi_600 (operands[0], operands[1], operands[2])); DONE; } else if (TARGET_MULMAC_32BY16_SET) { operands[2] = force_reg (SImode, operands[2]); emit_insn (gen_umulsidi64 (operands[0], operands[1], operands[2])); DONE; } else { gcc_unreachable (); } }) (define_insn_and_split "umulsidi64" [(set (match_operand:DI 0 "register_operand" "=w") (mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" "%c")) (zero_extend:DI (match_operand:SI 2 "extend_operand" "ci")))) (clobber (reg:DI MUL32x16_REG))] "TARGET_MULMAC_32BY16_SET" "#" "TARGET_MULMAC_32BY16_SET && reload_completed" [(const_int 0)] { rtx result_hi; rtx result_low; result_hi = gen_highpart (SImode, operands[0]); result_low = gen_lowpart (SImode, operands[0]); emit_insn (gen_umul64_600 (operands[1], operands[2])); emit_insn (gen_umac64_600 (result_hi, operands[1], operands[2])); emit_move_insn (result_low, gen_acc2 ()); DONE; } [(set_attr "type" "multi") (set_attr "length" "8")]) (define_insn "umul64_600" [(set (reg:DI MUL32x16_REG) (mult:DI (zero_extend:DI (match_operand:SI 0 "register_operand" "c,c,c")) (zero_extract:DI (match_operand:SI 1 "nonmemory_operand" "c,L,Cal") (const_int 16) (const_int 0)))) ] "TARGET_MULMAC_32BY16_SET" "mululw 0, %0, %1" [(set_attr "length" "4,4,8") (set_attr "type" "mulmac_600") (set_attr "predicable" "no") (set_attr "cond" "nocond")]) (define_insn "umac64_600" [(set (reg:DI MUL32x16_REG) (plus:DI (mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" "c,c,c")) (ashift:DI (zero_extract:DI (match_operand:SI 2 "nonmemory_operand" "c,L,Cal") (const_int 16) (const_int 16)) (const_int 16))) (reg:DI MUL32x16_REG))) (set (match_operand:SI 0 "register_operand" "=w,w,w") (zero_extract:SI (plus:DI (mult:DI (zero_extend:DI (match_dup 1)) (ashift:DI (zero_extract:DI (match_dup 2) (const_int 16) (const_int 16)) (const_int 16))) (reg:DI MUL32x16_REG)) (const_int 32) (const_int 32)))] "TARGET_MULMAC_32BY16_SET" "machulw%? %0, %1, %2" [(set_attr "length" "4,4,8") (set_attr "type" "mulmac_600") (set_attr "predicable" "no,no,yes") (set_attr "cond" "nocond, canuse_limm, canuse")]) ;; DI <- DI(unsigned SI) * DI(unsigned SI) (define_insn_and_split "umulsidi3_700" [(set (match_operand:DI 0 "dest_reg_operand" "=&r") (mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" "%c")) (zero_extend:DI (match_operand:SI 2 "extend_operand" "cL"))))] "TARGET_MPY && !TARGET_PLUS_MACD" "#" "TARGET_MPY && !TARGET_PLUS_MACD && reload_completed" [(const_int 0)] { int hi = !TARGET_BIG_ENDIAN; int lo = !hi; rtx l0 = operand_subword (operands[0], lo, 0, DImode); rtx h0 = operand_subword (operands[0], hi, 0, DImode); emit_insn (gen_umulsi3_highpart (h0, operands[1], operands[2])); emit_insn (gen_mulsi3 (l0, operands[1], operands[2])); DONE; } [(set_attr "type" "umulti") (set_attr "length" "8")]) (define_expand "addsi3" [(set (match_operand:SI 0 "dest_reg_operand" "") (plus:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "nonmemory_operand" "")))] "" "if (flag_pic && arc_raw_symbolic_reference_mentioned_p (operands[2], false)) { operands[2]=force_reg(SImode, operands[2]); } ") (define_expand "adddi3" [(set (match_operand:DI 0 "register_operand" "") (plus:DI (match_operand:DI 1 "register_operand" "") (match_operand:DI 2 "nonmemory_operand" ""))) (clobber (reg:CC CC_REG))] "" " rtx l0 = gen_lowpart (SImode, operands[0]); rtx h0 = gen_highpart (SImode, operands[0]); rtx l1 = gen_lowpart (SImode, operands[1]); rtx h1 = gen_highpart (SImode, operands[1]); rtx l2 = simplify_gen_subreg (SImode, operands[2], DImode, subreg_lowpart_offset (SImode, DImode)); rtx h2 = simplify_gen_subreg (SImode, operands[2], DImode, subreg_highpart_offset (SImode, DImode)); if (l2 == const0_rtx) { if (!rtx_equal_p (l0, l1) && !rtx_equal_p (l0, h1)) emit_move_insn (l0, l1); emit_insn (gen_addsi3 (h0, h1, h2)); if (!rtx_equal_p (l0, l1) && rtx_equal_p (l0, h1)) emit_move_insn (l0, l1); DONE; } if (rtx_equal_p (l0, h1)) { if (h2 != const0_rtx) emit_insn (gen_addsi3 (h0, h1, h2)); else if (!rtx_equal_p (h0, h1)) emit_move_insn (h0, h1); emit_insn (gen_add_f (l0, l1, l2)); emit_insn (gen_rtx_COND_EXEC (VOIDmode, gen_rtx_LTU (VOIDmode, gen_rtx_REG (CC_Cmode, CC_REG), GEN_INT (0)), gen_rtx_SET (h0, plus_constant (SImode, h0, 1)))); DONE; } emit_insn (gen_add_f (l0, l1, l2)); emit_insn (gen_adc (h0, h1, h2)); DONE; ") (define_insn "add_f" [(set (reg:CC_C CC_REG) (compare:CC_C (plus:SI (match_operand:SI 1 "nonmemory_operand" "%r,L,0,I,Cal,r") (match_operand:SI 2 "nonmemory_operand" "rL,r,I,0, r,rCal")) (match_dup 1))) (set (match_operand:SI 0 "dest_reg_operand" "=r,r,r,r,r,r") (plus:SI (match_dup 1) (match_dup 2)))] "register_operand (operands[1], SImode) || register_operand (operands[2], SImode)" "@ add.f\\t%0,%1,%2 add.f\\t%0,%2,%1 add.f\\t%0,%1,%2 add.f\\t%0,%2,%1 add.f\\t%0,%2,%1 add.f\\t%0,%1,%2" [(set_attr "cond" "set") (set_attr "type" "compare") (set_attr "length" "4,4,4,4,8,8")]) (define_insn "*add_f_2" [(set (reg:CC_C CC_REG) (compare:CC_C (plus:SI (match_operand:SI 1 "register_operand" "c,0,c") (match_operand:SI 2 "nonmemory_operand" "cL,I,cCal")) (match_dup 2))) (set (match_operand:SI 0 "dest_reg_operand" "=w,Rcw,w") (plus:SI (match_dup 1) (match_dup 2)))] "" "add.f %0,%1,%2" [(set_attr "cond" "set") (set_attr "type" "compare") (set_attr "length" "4,4,8")]) (define_insn "adc" [(set (match_operand:SI 0 "register_operand" "=r, r,r,r, r,r") (plus:SI (plus:SI (ltu:SI (reg:CC_C CC_REG) (const_int 0)) (match_operand:SI 1 "nonmemory_operand" "%r, 0,r,0,Cal,r")) (match_operand:SI 2 "nonmemory_operand" "r,C_0,L,I, r,Cal")))] "register_operand (operands[1], SImode) || register_operand (operands[2], SImode)" "@ adc\\t%0,%1,%2 add.cs\\t%0,%1,1 adc\\t%0,%1,%2 adc\\t%0,%1,%2 adc\\t%0,%1,%2 adc\\t%0,%1,%2" [(set_attr "cond" "use") (set_attr "type" "cc_arith") (set_attr "length" "4,4,4,4,8,8")]) ; combiner-splitter cmp / scc -> cmp / adc (define_split [(set (match_operand:SI 0 "dest_reg_operand" "") (gtu:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "register_operand" ""))) (clobber (reg CC_REG))] "" [(set (reg:CC_C CC_REG) (compare:CC_C (match_dup 2) (match_dup 1))) (set (match_dup 0) (ltu:SI (reg:CC_C CC_REG) (const_int 0)))]) ; combine won't work when an intermediate result is used later... ; add %0,%1,%2 ` cmp %0,%[12] -> add.f %0,%1,%2 (define_peephole2 [(set (match_operand:SI 0 "dest_reg_operand" "") (plus:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "nonmemory_operand" ""))) (set (reg:CC_C CC_REG) (compare:CC_C (match_dup 0) (match_operand:SI 3 "nonmemory_operand" "")))] "rtx_equal_p (operands[1], operands[3]) || rtx_equal_p (operands[2], operands[3])" [(parallel [(set (reg:CC_C CC_REG) (compare:CC_C (plus:SI (match_dup 1) (match_dup 2)) (match_dup 1))) (set (match_dup 0) (plus:SI (match_dup 1) (match_dup 2)))])]) ; ??? need to delve into combine to find out why this is not useful. ; We'd like to be able to grok various C idioms for carry bit usage. ;(define_insn "*adc_0" ; [(set (match_operand:SI 0 "dest_reg_operand" "=w") ; (plus:SI (ltu:SI (reg:CC_C CC_REG) (const_int 0)) ; (match_operand:SI 1 "register_operand" "c")))] ; "" ; "adc %0,%1,0" ; [(set_attr "cond" "use") ; (set_attr "type" "cc_arith") ; (set_attr "length" "4")]) ; ;(define_split ; [(set (match_operand:SI 0 "dest_reg_operand" "=w") ; (plus:SI (gtu:SI (match_operand:SI 1 "register_operand" "c") ; (match_operand:SI 2 "register_operand" "c")) ; (match_operand:SI 3 "register_operand" "c"))) ; (clobber (reg CC_REG))] ; "" ; [(set (reg:CC_C CC_REG) (compare:CC_C (match_dup 2) (match_dup 1))) ; (set (match_dup 0) ; (plus:SI (ltu:SI (reg:CC_C CC_REG) (const_int 0)) ; (match_dup 3)))]) (define_expand "subsi3" [(set (match_operand:SI 0 "dest_reg_operand" "") (minus:SI (match_operand:SI 1 "nonmemory_operand" "") (match_operand:SI 2 "nonmemory_operand" "")))] "" " { int c = 1; if (!register_operand (operands[2], SImode)) { operands[1] = force_reg (SImode, operands[1]); c = 2; } if (flag_pic && arc_raw_symbolic_reference_mentioned_p (operands[c], false)) operands[c] = force_reg (SImode, operands[c]); }") ; the casesi expander might generate a sub of zero, so we have to recognize it. ; combine should make such an insn go away. (define_insn_and_split "subsi3_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcqq,Rcqq,Rcw,Rcw,w,w,w, w, w, w") (minus:SI (match_operand:SI 1 "nonmemory_operand" "0,Rcqq, 0, cL,c,L,I,Cal,Cal, c") (match_operand:SI 2 "nonmemory_operand" "Rcqq,Rcqq, c, 0,c,c,0, 0, c,Cal")))] "register_operand (operands[1], SImode) || register_operand (operands[2], SImode)" "@ sub%? %0,%1,%2%& sub%? %0,%1,%2%& sub%? %0,%1,%2 rsub%? %0,%2,%1 sub %0,%1,%2 rsub %0,%2,%1 rsub %0,%2,%1 rsub%? %0,%2,%1 rsub %0,%2,%1 sub %0,%1,%2" "reload_completed && get_attr_length (insn) == 8 && satisfies_constraint_I (operands[1]) && GET_CODE (PATTERN (insn)) != COND_EXEC" [(set (match_dup 0) (match_dup 3)) (set (match_dup 0) (match_dup 4))] "split_subsi (operands);" [(set_attr "iscompact" "maybe,maybe,false,false,false,false,false,false,false, false") (set_attr "length" "*,*,4,4,4,4,4,8,8,8") (set_attr "predicable" "yes,no,yes,yes,no,no,no,yes,no,no") (set_attr "cond" "canuse,nocond,canuse,canuse,nocond,nocond,canuse_limm,canuse,nocond,nocond") (set_attr "cpu_facility" "*,cd,*,*,*,*,*,*,*,*") ]) (define_expand "subdi3" [(set (match_operand:DI 0 "register_operand" "") (minus:DI (match_operand:DI 1 "register_operand" "") (match_operand:DI 2 "nonmemory_operand" ""))) (clobber (reg:CC CC_REG))] "" " rtx l0 = gen_lowpart (SImode, operands[0]); rtx h0 = gen_highpart (SImode, operands[0]); rtx l1 = gen_lowpart (SImode, operands[1]); rtx h1 = gen_highpart (SImode, operands[1]); rtx l2 = simplify_gen_subreg (SImode, operands[2], DImode, subreg_lowpart_offset (SImode, DImode)); rtx h2 = simplify_gen_subreg (SImode, operands[2], DImode, subreg_highpart_offset (SImode, DImode)); if (rtx_equal_p (l0, h1) || rtx_equal_p (l0, h2)) { h1 = simplify_gen_binary (MINUS, SImode, h1, h2); if (!rtx_equal_p (h0, h1)) emit_insn (gen_rtx_SET (h0, h1)); emit_insn (gen_sub_f (l0, l1, l2)); emit_insn (gen_rtx_COND_EXEC (VOIDmode, gen_rtx_LTU (VOIDmode, gen_rtx_REG (CC_Cmode, CC_REG), GEN_INT (0)), gen_rtx_SET (h0, plus_constant (SImode, h0, -1)))); DONE; } emit_insn (gen_sub_f (l0, l1, l2)); emit_insn (gen_sbc (h0, h1, h2)); DONE; ") (define_insn "*sbc_0" [(set (match_operand:SI 0 "dest_reg_operand" "=w") (minus:SI (match_operand:SI 1 "register_operand" "c") (ltu:SI (match_operand:CC_C 2 "cc_use_register") (const_int 0))))] "" "sbc %0,%1,0" [(set_attr "cond" "use") (set_attr "type" "cc_arith") (set_attr "length" "4")]) (define_insn "sbc" [(set (match_operand:SI 0 "dest_reg_operand" "=r,r,r,r,r,r") (minus:SI (minus:SI (match_operand:SI 1 "nonmemory_operand" "r, 0,r,0, r,Cal") (ltu:SI (reg:CC_C CC_REG) (const_int 0))) (match_operand:SI 2 "nonmemory_operand" "r,C_0,L,I,Cal,r")))] "register_operand (operands[1], SImode) || register_operand (operands[2], SImode)" "@ sbc\\t%0,%1,%2 sub.cs\\t%0,%1,1 sbc\\t%0,%1,%2 sbc\\t%0,%1,%2 sbc\\t%0,%1,%2 sbc\\t%0,%1,%2" [(set_attr "cond" "use") (set_attr "type" "cc_arith") (set_attr "length" "4,4,4,4,8,8")]) (define_insn "sub_f" [(set (reg:CC CC_REG) (compare:CC (match_operand:SI 1 "nonmemory_operand" " c,L,0,I,c,Cal") (match_operand:SI 2 "nonmemory_operand" "cL,c,I,0,Cal,c"))) (set (match_operand:SI 0 "dest_reg_operand" "=w,w,Rcw,Rcw,w,w") (minus:SI (match_dup 1) (match_dup 2)))] "register_operand (operands[1], SImode) || register_operand (operands[2], SImode)" "@ sub.f %0,%1,%2 rsub.f %0,%2,%1 sub.f %0,%1,%2 rsub.f %0,%2,%1 sub.f %0,%1,%2 sub.f %0,%1,%2" [(set_attr "type" "compare") (set_attr "length" "4,4,4,4,8,8")]) ; combine won't work when an intermediate result is used later... ; add %0,%1,%2 ` cmp %0,%[12] -> add.f %0,%1,%2 (define_peephole2 [(set (reg:CC CC_REG) (compare:CC (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "nonmemory_operand" ""))) (set (match_operand:SI 0 "dest_reg_operand" "") (minus:SI (match_dup 1) (match_dup 2)))] "" [(parallel [(set (reg:CC CC_REG) (compare:CC (match_dup 1) (match_dup 2))) (set (match_dup 0) (minus:SI (match_dup 1) (match_dup 2)))])]) (define_peephole2 [(set (reg:CC CC_REG) (compare:CC (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "nonmemory_operand" ""))) (set (match_operand 3 "" "") (match_operand 4 "" "")) (set (match_operand:SI 0 "dest_reg_operand" "") (minus:SI (match_dup 1) (match_dup 2)))] "!reg_overlap_mentioned_p (operands[3], operands[1]) && !reg_overlap_mentioned_p (operands[3], operands[2]) && !reg_overlap_mentioned_p (operands[0], operands[4]) && !reg_overlap_mentioned_p (operands[0], operands[3])" [(parallel [(set (reg:CC CC_REG) (compare:CC (match_dup 1) (match_dup 2))) (set (match_dup 0) (minus:SI (match_dup 1) (match_dup 2)))]) (set (match_dup 3) (match_dup 4))]) (define_insn "*add_n" [(set (match_operand:SI 0 "dest_reg_operand" "=q,r,r") (plus:SI (mult:SI (match_operand:SI 1 "register_operand" "q,r,r") (match_operand:SI 2 "_2_4_8_operand" "")) (match_operand:SI 3 "arc_nonmemory_operand" "0,r,Csz")))] "" "add%z2%?\\t%0,%3,%1" [(set_attr "type" "shift") (set_attr "length" "*,4,8") (set_attr "predicable" "yes,no,no") (set_attr "cond" "canuse,nocond,nocond") (set_attr "iscompact" "maybe,false,false")]) ;; N.B. sub[123] has the operands of the MINUS in the opposite order from ;; what synth_mult likes. (define_insn "*sub_n" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcw,w,w") (minus:SI (match_operand:SI 1 "nonmemory_operand" "0,c,?Cal") (ashift:SI (match_operand:SI 2 "register_operand" "c,c,c") (match_operand:SI 3 "_1_2_3_operand" ""))))] "" "sub%c3%? %0,%1,%2" [(set_attr "type" "shift") (set_attr "length" "4,4,8") (set_attr "predicable" "yes,no,no") (set_attr "cond" "canuse,nocond,nocond") (set_attr "iscompact" "false")]) (define_insn "*sub_n" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcw,w,w") (minus:SI (match_operand:SI 1 "nonmemory_operand" "0,c,?Cal") (mult:SI (match_operand:SI 2 "register_operand" "c,c,c") (match_operand:SI 3 "_2_4_8_operand" ""))))] "" "sub%z3%? %0,%1,%2" [(set_attr "type" "shift") (set_attr "length" "4,4,8") (set_attr "predicable" "yes,no,no") (set_attr "cond" "canuse,nocond,nocond") (set_attr "iscompact" "false")]) ; ??? check if combine matches this. (define_insn "*bset" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcw,w,w") (ior:SI (ashift:SI (const_int 1) (match_operand:SI 1 "nonmemory_operand" "cL,cL,c")) (match_operand:SI 2 "nonmemory_operand" "0,c,Cal")))] "" "bset%? %0,%2,%1" [(set_attr "length" "4,4,8") (set_attr "predicable" "yes,no,no") (set_attr "cond" "canuse,nocond,nocond")] ) ; ??? check if combine matches this. (define_insn "*bxor" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcw,w,w") (xor:SI (ashift:SI (const_int 1) (match_operand:SI 1 "nonmemory_operand" "cL,cL,c")) (match_operand:SI 2 "nonmemory_operand" "0,c,Cal")))] "" "bxor%? %0,%2,%1" [(set_attr "length" "4,4,8") (set_attr "predicable" "yes,no,no") (set_attr "cond" "canuse,nocond,nocond")] ) ; ??? check if combine matches this. (define_insn "*bclr" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcw,w,w") (and:SI (not:SI (ashift:SI (const_int 1) (match_operand:SI 1 "nonmemory_operand" "cL,cL,c"))) (match_operand:SI 2 "nonmemory_operand" "0,c,Cal")))] "" "bclr%? %0,%2,%1" [(set_attr "length" "4,4,8") (set_attr "predicable" "yes,no,no") (set_attr "cond" "canuse,nocond,nocond")] ) ; ??? FIXME: find combine patterns for bmsk. ;;Following are the define_insns added for the purpose of peephole2's ; see also iorsi3 for use with constant bit number. (define_insn "*bset_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcw,w,w") (ior:SI (match_operand:SI 1 "nonmemory_operand" "0,c,Cal") (ashift:SI (const_int 1) (match_operand:SI 2 "nonmemory_operand" "cL,cL,c"))) ) ] "" "@ bset%? %0,%1,%2 ;;peep2, constr 1 bset %0,%1,%2 ;;peep2, constr 2 bset %0,%1,%2 ;;peep2, constr 3" [(set_attr "length" "4,4,8") (set_attr "predicable" "yes,no,no") (set_attr "cond" "canuse,nocond,nocond")] ) ; see also xorsi3 for use with constant bit number. (define_insn "*bxor_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcw,w,w") (xor:SI (match_operand:SI 1 "nonmemory_operand" "0,c,Cal") (ashift:SI (const_int 1) (match_operand:SI 2 "nonmemory_operand" "cL,cL,c"))) ) ] "" "@ bxor%? %0,%1,%2 bxor %0,%1,%2 bxor %0,%1,%2" [(set_attr "length" "4,4,8") (set_attr "predicable" "yes,no,no") (set_attr "cond" "canuse,nocond,nocond")] ) ; see also andsi3 for use with constant bit number. (define_insn "*bclr_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcw,w,w") (and:SI (not:SI (ashift:SI (const_int 1) (match_operand:SI 2 "nonmemory_operand" "cL,rL,r"))) (match_operand:SI 1 "nonmemory_operand" "0,c,Cal")))] "" "@ bclr%? %0,%1,%2 bclr %0,%1,%2 bclr %0,%1,%2" [(set_attr "length" "4,4,8") (set_attr "predicable" "yes,no,no") (set_attr "cond" "canuse,nocond,nocond")] ) ; see also andsi3 for use with constant bit number. (define_insn "*bmsk_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcw,w,w") (and:SI (match_operand:SI 1 "nonmemory_operand" "0,c,Cal") (plus:SI (ashift:SI (const_int 1) (plus:SI (match_operand:SI 2 "nonmemory_operand" "rL,rL,r") (const_int 1))) (const_int -1))))] "" "@ bmsk%? %0,%1,%2 bmsk %0,%1,%2 bmsk %0,%1,%2" [(set_attr "length" "4,4,8") (set_attr "predicable" "yes,no,no") (set_attr "cond" "canuse,nocond,nocond")] ) ;;Instructions added for peephole2s end ;; Boolean instructions. (define_expand "andsi3" [(set (match_operand:SI 0 "dest_reg_operand" "") (and:SI (match_operand:SI 1 "nonimmediate_operand" "") (match_operand:SI 2 "nonmemory_operand" "")))] "" "if (!satisfies_constraint_Cux (operands[2])) operands[1] = force_reg (SImode, operands[1]); ") (define_insn "andsi3_i" ;0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [(set (match_operand:SI 0 "dest_reg_operand" "=q,q, q, q, q, r,r, r, r, r,r, r, r, r, r, q,r, r, r, W") (and:SI (match_operand:SI 1 "nonimmediate_operand" "%0,q, 0, 0, q, 0,r, 0, 0, 0,0, r, r, r, r, q,0, 0, r, o") (match_operand:SI 2 "nonmemory_operand" "q,0,C1p,Ccp,Cux,rL,0,C2pC1p,Ccp,CnL,I,rL,C2pC1p,Ccp,CnL,Cbf,I,Cal,Cal,Cux")))] "(register_operand (operands[1], SImode) && nonmemory_operand (operands[2], SImode)) || (memory_operand (operands[1], SImode) && satisfies_constraint_Cux (operands[2]))" { switch (which_alternative) { case 0: case 5: case 10: case 11: case 16: case 17: case 18: return "and%? %0,%1,%2%&"; case 1: case 6: return "and%? %0,%2,%1%&"; case 2: return "bmsk%? %0,%1,%Z2%&"; case 7: case 12: if (satisfies_constraint_C2p (operands[2])) { operands[2] = GEN_INT ((~INTVAL (operands[2]))); return "bmskn%? %0,%1,%Z2%&"; } else { return "bmsk%? %0,%1,%Z2%&"; } case 3: case 8: case 13: return "bclr%? %0,%1,%M2%&"; case 4: return (INTVAL (operands[2]) == 0xff ? "extb%? %0,%1%&" : "ext%_%? %0,%1%&"); case 9: case 14: return \"bic%? %0,%1,%n2-1\"; case 15: return "movb.cl %0,%1,%p2,%p2,%s2"; case 19: const char *tmpl; if (satisfies_constraint_Ucm (operands[1])) tmpl = (INTVAL (operands[2]) == 0xff ? "xldb%U1 %0,%1" : "xld%_%U1 %0,%1"); else tmpl = INTVAL (operands[2]) == 0xff ? "ldb %0,%1" : "ld%_ %0,%1"; if (TARGET_BIG_ENDIAN) { rtx xop[2]; xop[0] = operands[0]; xop[1] = adjust_address (operands[1], QImode, INTVAL (operands[2]) == 0xff ? 3 : 2); output_asm_insn (tmpl, xop); return ""; } return tmpl; default: gcc_unreachable (); } } [(set_attr "iscompact" "maybe,maybe,maybe,maybe,true,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false") (set_attr "type" "binary,binary,binary,binary,binary,binary,binary,binary,binary,binary,binary,binary,binary,binary,binary,shift,binary,binary,binary,load") (set_attr "length" "*,*,*,*,*,4,4,4,4,4,4,4,4,4,4,4,4,8,8,*") (set_attr "predicable" "no,no,no,no,no,yes,yes,yes,yes,yes,no,no,no,no,no,no,no,yes,no,no") (set_attr "cond" "canuse,canuse,canuse,canuse,nocond,canuse,canuse,canuse,canuse,canuse,canuse_limm,nocond,nocond,nocond,nocond,nocond,canuse_limm,canuse,nocond,nocond")]) ; combiner splitter, pattern found in ldtoa.c . ; and op3,op0,op1 / cmp op3,op2 -> add op3,op0,op4 / bmsk.f 0,op3,op1 (define_split [(set (reg:CC_Z CC_REG) (compare:CC_Z (and:SI (match_operand:SI 0 "register_operand" "") (match_operand 1 "const_int_operand" "")) (match_operand 2 "const_int_operand" ""))) (clobber (match_operand:SI 3 "register_operand" ""))] "((INTVAL (operands[1]) + 1) & INTVAL (operands[1])) == 0" [(set (match_dup 3) (plus:SI (match_dup 0) (match_dup 4))) (set (reg:CC_Z CC_REG) (compare:CC_Z (and:SI (match_dup 3) (match_dup 1)) (const_int 0)))] "operands[4] = GEN_INT ( -(~INTVAL (operands[1]) | INTVAL (operands[2])));") ;;bic define_insn that allows limm to be the first operand (define_insn "*bicsi3_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcqq,Rcw,Rcw,Rcw,w,w,w") (and:SI (not:SI (match_operand:SI 1 "nonmemory_operand" "Rcqq,Lc,I,Cal,Lc,Cal,c")) (match_operand:SI 2 "nonmemory_operand" "0,0,0,0,c,c,Cal")))] "" "@ bic%? %0, %2, %1%& ;;constraint 0 bic%? %0,%2,%1 ;;constraint 1 bic %0,%2,%1 ;;constraint 2, FIXME: will it ever get generated ??? bic%? %0,%2,%1 ;;constraint 3, FIXME: will it ever get generated ??? bic %0,%2,%1 ;;constraint 4 bic %0,%2,%1 ;;constraint 5, FIXME: will it ever get generated ??? bic %0,%2,%1 ;;constraint 6" [(set_attr "length" "*,4,4,8,4,8,8") (set_attr "iscompact" "maybe, false, false, false, false, false, false") (set_attr "predicable" "no,yes,no,yes,no,no,no") (set_attr "cond" "canuse,canuse,canuse_limm,canuse,nocond,nocond,nocond")]) (define_insn_and_split "iorsi3" [(set (match_operand:SI 0 "dest_reg_operand" "=q,q, q, r,r, r,r, r, r,r, q, r, r") (ior:SI (match_operand:SI 1 "register_operand" "%0,q, 0, 0,r, 0,0, r, r,0, r, 0, r") (match_operand:SI 2 "nonmemory_operand" "q,0,C0p,rL,0,C0p,I,rL,C0p,I,C0x,Cal,Cal")))] "" "@ or%?\\t%0,%1,%2 or%?\\t%0,%2,%1 bset%?\\t%0,%1,%z2 or%?\\t%0,%1,%2 or%?\\t%0,%2,%1 bset%?\\t%0,%1,%z2 or%?\\t%0,%1,%2 or%?\\t%0,%1,%2 bset%?\\t%0,%1,%z2 or%?\\t%0,%1,%2 # or%?\\t%0,%1,%2 or%?\\t%0,%1,%2" "reload_completed && GET_CODE (PATTERN (insn)) != COND_EXEC && register_operand (operands[0], SImode) && IN_RANGE (REGNO (operands[0]) ^ 4, 4, 11) && satisfies_constraint_C0x (operands[2])" [(const_int 0)] " arc_split_ior (operands); DONE; " [(set_attr "iscompact" "maybe,maybe,maybe,false,false,false,false,false,false,false,false,false,false") (set_attr "length" "*,*,*,4,4,4,4,4,4,4,*,8,8") (set_attr "predicable" "no,no,no,yes,yes,yes,no,no,no,no,no,yes,no") (set_attr "cond" "canuse,canuse,canuse,canuse,canuse,canuse,canuse_limm,nocond,nocond,canuse_limm,nocond,canuse,nocond")]) (define_insn "xorsi3" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcqq,Rcq,Rcw,Rcw,Rcw,Rcw, w, w,w, w, w") (xor:SI (match_operand:SI 1 "register_operand" "%0, Rcq, 0, c, 0, 0, c, c,0, 0, c") (match_operand:SI 2 "nonmemory_operand" " Rcqq, 0, cL, 0,C0p, I,cL,C0p,I,Cal,Cal")))] "" "* switch (which_alternative) { case 0: case 2: case 5: case 6: case 8: case 9: case 10: return \"xor%? %0,%1,%2%&\"; case 1: case 3: return \"xor%? %0,%2,%1%&\"; case 4: case 7: return \"bxor%? %0,%1,%z2\"; default: gcc_unreachable (); } " [(set_attr "iscompact" "maybe,maybe,false,false,false,false,false,false,false,false,false") (set_attr "type" "binary") (set_attr "length" "*,*,4,4,4,4,4,4,4,8,8") (set_attr "predicable" "no,no,yes,yes,yes,no,no,no,no,yes,no") (set_attr "cond" "canuse,canuse,canuse,canuse,canuse,canuse_limm,nocond,nocond,canuse_limm,canuse,nocond")]) (define_insn "negsi2" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcqq,Rcqq,Rcw,w") (neg:SI (match_operand:SI 1 "register_operand" "0,Rcqq,0,c")))] "" "neg%? %0,%1%&" [(set_attr "type" "unary") (set_attr "iscompact" "maybe,true,false,false") (set_attr "predicable" "no,no,yes,no")]) (define_insn "one_cmplsi2" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcqq,w") (not:SI (match_operand:SI 1 "register_operand" "Rcqq,c")))] "" "not%? %0,%1%&" [(set_attr "type" "unary,unary") (set_attr "iscompact" "true,false")]) (define_insn_and_split "one_cmpldi2" [(set (match_operand:DI 0 "dest_reg_operand" "=q,w") (not:DI (match_operand:DI 1 "register_operand" "q,c")))] "" "#" "&& reload_completed" [(set (match_dup 2) (not:SI (match_dup 3))) (set (match_dup 4) (not:SI (match_dup 5)))] { int swap = (true_regnum (operands[0]) == true_regnum (operands[1]) + 1); operands[2] = operand_subword (operands[0], 0+swap, 0, DImode); operands[3] = operand_subword (operands[1], 0+swap, 0, DImode); operands[4] = operand_subword (operands[0], 1-swap, 0, DImode); operands[5] = operand_subword (operands[1], 1-swap, 0, DImode); } [(set_attr "type" "unary,unary") (set_attr "cond" "nocond,nocond") (set_attr "length" "4,8")]) ;; Shift instructions. (define_expand "ashlsi3" [(set (match_operand:SI 0 "dest_reg_operand" "") (ashift:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "nonmemory_operand" "")))] "" " { if (!TARGET_BARREL_SHIFTER) { emit_shift (ASHIFT, operands[0], operands[1], operands[2]); DONE; } }") (define_expand "ashrsi3" [(set (match_operand:SI 0 "dest_reg_operand" "") (ashiftrt:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "nonmemory_operand" "")))] "" " { if (!TARGET_BARREL_SHIFTER) { emit_shift (ASHIFTRT, operands[0], operands[1], operands[2]); DONE; } }") (define_expand "lshrsi3" [(set (match_operand:SI 0 "dest_reg_operand" "") (lshiftrt:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "nonmemory_operand" "")))] "" " { if (!TARGET_BARREL_SHIFTER) { emit_shift (LSHIFTRT, operands[0], operands[1], operands[2]); DONE; } }") (define_insn "shift_si3" [(set (match_operand:SI 0 "dest_reg_operand" "=r") (match_operator:SI 3 "shift4_operator" [(match_operand:SI 1 "register_operand" "0") (match_operand:SI 2 "const_int_operand" "n")])) (clobber (match_scratch:SI 4 "=&r")) (clobber (reg:CC CC_REG)) ] "!TARGET_BARREL_SHIFTER" "* return output_shift (operands);" [(set_attr "type" "shift") (set_attr "length" "16")]) (define_insn "shift_si3_loop" [(set (match_operand:SI 0 "dest_reg_operand" "=r,r") (match_operator:SI 3 "shift_operator" [(match_operand:SI 1 "register_operand" "0,0") (match_operand:SI 2 "nonmemory_operand" "rn,Cal")])) (clobber (match_scratch:SI 4 "=X,X")) (clobber (reg:SI LP_COUNT)) (clobber (reg:CC CC_REG)) ] "!TARGET_BARREL_SHIFTER" "* return output_shift (operands);" [(set_attr "type" "shift") (set_attr "length" "16,20")]) ; asl, asr, lsr patterns: ; There is no point in including an 'I' alternative since only the lowest 5 ; bits are used for the shift. OTOH Cal can be useful if the shift amount ; is defined in an external symbol, as we don't have special relocations ; to truncate a symbol in a u6 immediate; but that's rather exotic, so only ; provide one alternatice for this, without condexec support. (define_insn "*ashlsi3_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=q,q, q, r, r, r") (ashift:SI (match_operand:SI 1 "arc_nonmemory_operand" "!0,q, 0, 0, r,rCsz") (match_operand:SI 2 "nonmemory_operand" "K,K,qM,rL,rL,rCal")))] "TARGET_BARREL_SHIFTER && (register_operand (operands[1], SImode) || register_operand (operands[2], SImode))" "asl%?\\t%0,%1,%2" [(set_attr "type" "shift") (set_attr "iscompact" "maybe,maybe,maybe,false,false,false") (set_attr "predicable" "no,no,no,yes,no,no") (set_attr "cond" "canuse,nocond,canuse,canuse,nocond,nocond")]) (define_insn "*ashrsi3_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=q,q, q, r, r, r") (ashiftrt:SI (match_operand:SI 1 "arc_nonmemory_operand" "!0,q, 0, 0, r,rCsz") (match_operand:SI 2 "nonmemory_operand" "K,K,qM,rL,rL,rCal")))] "TARGET_BARREL_SHIFTER && (register_operand (operands[1], SImode) || register_operand (operands[2], SImode))" "asr%?\\t%0,%1,%2" [(set_attr "type" "shift") (set_attr "iscompact" "maybe,maybe,maybe,false,false,false") (set_attr "predicable" "no,no,no,yes,no,no") (set_attr "cond" "canuse,nocond,canuse,canuse,nocond,nocond")]) (define_insn "*lshrsi3_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=Rcq,Rcqq,Rcqq,Rcw, w, w") (lshiftrt:SI (match_operand:SI 1 "nonmemory_operand" "!0,Rcqq, 0, 0, c,cCal") (match_operand:SI 2 "nonmemory_operand" "N, N,RcqqM, cL,cL,cCal")))] "TARGET_BARREL_SHIFTER && (register_operand (operands[1], SImode) || register_operand (operands[2], SImode))" "*return (which_alternative <= 1 && !arc_ccfsm_cond_exec_p () ? \"lsr%? %0,%1%&\" : \"lsr%? %0,%1,%2%&\");" [(set_attr "type" "shift") (set_attr "iscompact" "maybe,maybe,maybe,false,false,false") (set_attr "predicable" "no,no,no,yes,no,no") (set_attr "cond" "canuse,nocond,canuse,canuse,nocond,nocond")]) (define_insn "rotrsi3" [(set (match_operand:SI 0 "dest_reg_operand" "=r, r, r") (rotatert:SI (match_operand:SI 1 "arc_nonmemory_operand" " 0,rL,rCsz") (match_operand:SI 2 "nonmemory_operand" "rL,rL,rCal")))] "TARGET_BARREL_SHIFTER" "ror%?\\t%0,%1,%2" [(set_attr "type" "shift,shift,shift") (set_attr "predicable" "yes,no,no") (set_attr "length" "4,4,8")]) ;; Compare / branch instructions. (define_expand "cbranchsi4" [(set (reg:CC CC_REG) (compare:CC (match_operand:SI 1 "nonmemory_operand" "") (match_operand:SI 2 "nonmemory_operand" ""))) (set (pc) (if_then_else (match_operator 0 "ordered_comparison_operator" [(reg CC_REG) (const_int 0)]) (label_ref (match_operand 3 "" "")) (pc)))] "" { gcc_assert (XEXP (operands[0], 0) == operands[1]); gcc_assert (XEXP (operands[0], 1) == operands[2]); operands[0] = gen_compare_reg (operands[0], VOIDmode); emit_jump_insn (gen_branch_insn (operands[3], operands[0])); DONE; }) ;; ??? Could add a peephole to generate compare with swapped operands and ;; modifed cc user if second, but not first operand is a compact register. (define_insn "cmpsi_cc_insn_mixed" [(set (reg:CC CC_REG) (compare:CC (match_operand:SI 0 "register_operand" "Rcq#q,Rcqq, h, c, c,qRcq,c") (match_operand:SI 1 "nonmemory_operand" "cO, hO,Cm1,cI,cL, Cal,Cal")))] "" "cmp%? %0,%B1%&" [(set_attr "type" "compare") (set_attr "iscompact" "true,true,true,false,false,true_limm,false") (set_attr "predicable" "no,no,no,no,yes,no,yes") (set_attr "cond" "set") (set_attr "length" "*,*,*,4,4,*,8") (set_attr "cpu_facility" "av1,av2,*,*,*,*,*")]) (define_insn "*cmpsi_cc_zn_insn" [(set (reg:CC_ZN CC_REG) (compare:CC_ZN (match_operand:SI 0 "register_operand" "qRcq,c") (const_int 0)))] "" "tst%? %0,%0%&" [(set_attr "type" "compare,compare") (set_attr "iscompact" "true,false") (set_attr "predicable" "no,yes") (set_attr "cond" "set_zn") (set_attr "length" "*,4")]) ; combiner pattern observed for unwind-dw2-fde.c:linear_search_fdes. (define_insn "*btst" [(set (reg:CC_ZN CC_REG) (compare:CC_ZN (zero_extract:SI (match_operand:SI 0 "register_operand" "Rcqq,c") (const_int 1) (match_operand:SI 1 "nonmemory_operand" "L,Lc")) (const_int 0)))] "" "btst%? %0,%1" [(set_attr "iscompact" "true,false") (set_attr "predicable" "no,yes") (set_attr "cond" "set") (set_attr "type" "compare") (set_attr "length" "*,4")]) ; combine suffers from 'simplifications' that replace a one-bit zero ; extract with a shift if it can prove that the upper bits are zero. ; arc_reorg sees the code after sched2, which can have caused our ; inputs to be clobbered even if they were not clobbered before. ; Therefore, add a third way to convert btst / b{eq,ne} to bbit{0,1} ; OTOH, this is somewhat marginal, and can leat to out-of-range ; bbit (i.e. bad scheduling) and missed conditional execution, ; so make this an option. (define_peephole2 [(set (reg:CC_ZN CC_REG) (compare:CC_ZN (zero_extract:SI (match_operand:SI 0 "register_operand" "") (const_int 1) (match_operand:SI 1 "nonmemory_operand" "")) (const_int 0))) (set (pc) (if_then_else (match_operator 3 "equality_comparison_operator" [(reg:CC_ZN CC_REG) (const_int 0)]) (label_ref (match_operand 2 "" "")) (pc)))] "TARGET_BBIT_PEEPHOLE && peep2_regno_dead_p (2, CC_REG)" [(parallel [(set (pc) (if_then_else (match_op_dup 3 [(zero_extract:SI (match_dup 0) (const_int 1) (match_dup 1)) (const_int 0)]) (label_ref (match_dup 2)) (pc))) (clobber (reg:CC_ZN CC_REG))])]) (define_insn "*cmpsi_cc_z_insn" [(set (reg:CC_Z CC_REG) (compare:CC_Z (match_operand:SI 0 "register_operand" "qRcq,c") (match_operand:SI 1 "p2_immediate_operand" "O,n")))] "" "@ cmp%? %0,%1%& bxor.f 0,%0,%z1" [(set_attr "type" "compare,compare") (set_attr "iscompact" "true,false") (set_attr "cond" "set,set_zn") (set_attr "length" "*,4")]) (define_insn "*cmpsi_cc_c_insn" [(set (reg:CC_C CC_REG) (compare:CC_C (match_operand:SI 0 "register_operand" "Rcqq,Rcqq, h, c,Rcqq, c") (match_operand:SI 1 "nonmemory_operand" "cO, hO,Cm1,cI, Cal,Cal")))] "" "cmp%? %0,%1%&" [(set_attr "type" "compare") (set_attr "iscompact" "true,true,true,false,true_limm,false") (set_attr "cond" "set") (set_attr "length" "*,*,*,4,*,8") (set_attr "cpu_facility" "av1,av2,*,*,*,*")]) ;; Next come the scc insns. (define_expand "cstoresi4" [(set (match_operand:SI 0 "dest_reg_operand" "") (match_operator:SI 1 "ordered_comparison_operator" [(match_operand:SI 2 "nonmemory_operand" "") (match_operand:SI 3 "nonmemory_operand" "")]))] "" { if (!TARGET_CODE_DENSITY) { gcc_assert (XEXP (operands[1], 0) == operands[2]); gcc_assert (XEXP (operands[1], 1) == operands[3]); operands[1] = gen_compare_reg (operands[1], SImode); emit_insn (gen_scc_insn (operands[0], operands[1])); DONE; } if (!register_operand (operands[2], SImode)) operands[2] = force_reg (SImode, operands[2]); }) (define_mode_iterator SDF [(SF "TARGET_FP_SP_BASE || TARGET_OPTFPE") (DF "TARGET_FP_DP_BASE || TARGET_OPTFPE")]) (define_expand "cstore4" [(set (reg:CC CC_REG) (compare:CC (match_operand:SDF 2 "register_operand" "") (match_operand:SDF 3 "register_operand" ""))) (set (match_operand:SI 0 "dest_reg_operand" "") (match_operator:SI 1 "comparison_operator" [(reg CC_REG) (const_int 0)]))] "TARGET_HARD_FLOAT || TARGET_OPTFPE" { gcc_assert (XEXP (operands[1], 0) == operands[2]); gcc_assert (XEXP (operands[1], 1) == operands[3]); operands[1] = gen_compare_reg (operands[1], SImode); emit_insn (gen_scc_insn (operands[0], operands[1])); DONE; }) ; We need a separate expander for this lest we loose the mode of CC_REG ; when match_operator substitutes the literal operand into the comparison. (define_expand "scc_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=w") (match_operand:SI 1 ""))]) (define_insn_and_split "*scc_insn" [(set (match_operand:SI 0 "dest_reg_operand" "=w") (match_operator:SI 1 "proper_comparison_operator" [(reg CC_REG) (const_int 0)]))] "" "#" "reload_completed" [(set (match_dup 0) (const_int 1)) (cond_exec (match_dup 1) (set (match_dup 0) (const_int 0)))] { operands[1] = gen_rtx_fmt_ee (REVERSE_CONDITION (GET_CODE (operands[1]), GET_MODE (XEXP (operands[1], 0))), VOIDmode, XEXP (operands[1], 0), XEXP (operands[1], 1)); } [(set_attr "type" "unary")]) ; cond_exec patterns (define_insn "*movsi_ne" [(cond_exec (ne (match_operand:CC_Z 2 "cc_use_register" "Rcc,Rcc,Rcc,Rcc,Rcc") (const_int 0)) (set (match_operand:SI 0 "dest_reg_operand" "=q, q, r, q, r") (match_operand:SI 1 "nonmemory_operand" "C_0, h, Lr,Cal,Cal")))] "" "@ * current_insn_predicate = 0; return \"sub%?.ne\\t%0,%0,%0\"; * current_insn_predicate = 0; return \"mov%?.ne\\t%0,%1\"; mov.ne\\t%0,%1 * current_insn_predicate = 0; return \"mov%?.ne\\t%0,%1\"; mov.ne\\t%0,%1" [(set_attr "type" "cmove") (set_attr "iscompact" "true,true,false,true_limm,false") (set_attr "length" "2,2,4,6,8") (set_attr "cpu_facility" "*,av2,*,av2,*")]) (define_insn "*movsi_cond_exec" [(cond_exec (match_operator 3 "proper_comparison_operator" [(match_operand 2 "cc_register" "Rcc,Rcc") (const_int 0)]) (set (match_operand:SI 0 "dest_reg_operand" "=w,w") (match_operand:SI 1 "nonmemory_operand" "LRac,?Cal")))] "" "mov.%d3 %0,%1" [(set_attr "type" "cmove") (set_attr "length" "4,8")]) (define_insn "*commutative_cond_exec" [(cond_exec (match_operator 5 "proper_comparison_operator" [(match_operand 4 "cc_register" "Rcc,Rcc") (const_int 0)]) (set (match_operand:SI 0 "dest_reg_operand" "=w,w") (match_operator:SI 3 "commutative_operator" [(match_operand:SI 1 "register_operand" "%0,0") (match_operand:SI 2 "nonmemory_operand" "cL,?Cal")])))] "" { arc_output_commutative_cond_exec (operands, true); return ""; } [(set_attr "cond" "use") (set_attr "type" "cmove") (set_attr_alternative "length" [(const_int 4) (cond [(eq (symbol_ref "arc_output_commutative_cond_exec (operands, false)") (const_int 4)) (const_int 4)] (const_int 8))])]) (define_insn "*sub_cond_exec" [(cond_exec (match_operator 4 "proper_comparison_operator" [(match_operand 3 "cc_register" "Rcc,Rcc,Rcc") (const_int 0)]) (set (match_operand:SI 0 "dest_reg_operand" "=w,w,w") (minus:SI (match_operand:SI 1 "nonmemory_operand" "0,cL,Cal") (match_operand:SI 2 "nonmemory_operand" "cL,0,0"))))] "" "@ sub.%d4 %0,%1,%2 rsub.%d4 %0,%2,%1 rsub.%d4 %0,%2,%1" [(set_attr "cond" "use") (set_attr "type" "cmove") (set_attr "length" "4,4,8")]) (define_insn "*noncommutative_cond_exec" [(cond_exec (match_operator 5 "proper_comparison_operator" [(match_operand 4 "cc_register" "Rcc,Rcc") (const_int 0)]) (set (match_operand:SI 0 "dest_reg_operand" "=w,w") (match_operator:SI 3 "noncommutative_operator" [(match_operand:SI 1 "register_operand" "0,0") (match_operand:SI 2 "nonmemory_operand" "cL,Cal")])))] "" "%O3.%d5 %0,%1,%2" [(set_attr "cond" "use") (set_attr "type" "cmove") (set_attr "length" "4,8")]) ;; These control RTL generation for conditional jump insns ;; Match both normal and inverted jump. ; We need a separate expander for this lest we loose the mode of CC_REG ; when match_operator substitutes the literal operand into the comparison. (define_expand "branch_insn" [(set (pc) (if_then_else (match_operand 1 "" "") (label_ref (match_operand 0 "" "")) (pc)))]) ; When estimating sizes during arc_reorg, when optimizing for speed, there ; are three reasons why we need to consider branches to be length 6: ; - annull-false delay slot insns are implemented using conditional execution, ; thus preventing short insn formation where used. ; - for ARC600: annull-true delay slot isnns are implemented where possile ; using conditional execution, preventing short insn formation where used. ; - for ARC700: likely or somewhat likely taken branches are made long and ; unaligned if possible to avoid branch penalty. (define_insn "*branch_insn" [(set (pc) (if_then_else (match_operator 1 "proper_comparison_operator" [(reg CC_REG) (const_int 0)]) (label_ref (match_operand 0 "" "")) (pc)))] "" "* { if (arc_ccfsm_branch_deleted_p ()) { arc_ccfsm_record_branch_deleted (); return \"; branch deleted, next insns conditionalized\"; } else { arc_ccfsm_record_condition (operands[1], false, insn, 0); if (get_attr_length (insn) == 2) return \"b%d1%? %^%l0%&\"; else return \"b%d1%# %^%l0\"; } }" [(set_attr "type" "branch") (set (attr "length") (cond [ (eq_attr "delay_slot_filled" "yes") (const_int 4) (ne (if_then_else (match_operand 1 "equality_comparison_operator" "") (ior (lt (minus (match_dup 0) (pc)) (const_int -512)) (gt (minus (match_dup 0) (pc)) (minus (const_int 506) (symbol_ref "get_attr_delay_slot_length (insn)")))) (ior (match_test "!arc_short_comparison_p (operands[1], -64)") (lt (minus (match_dup 0) (pc)) (const_int -64)) (gt (minus (match_dup 0) (pc)) (minus (const_int 58) (symbol_ref "get_attr_delay_slot_length (insn)"))))) (const_int 0)) (const_int 4)] (const_int 2))) (set (attr "iscompact") (cond [(match_test "get_attr_length (insn) == 2") (const_string "true")] (const_string "false")))]) (define_insn "*rev_branch_insn" [(set (pc) (if_then_else (match_operator 1 "proper_comparison_operator" [(reg CC_REG) (const_int 0)]) (pc) (label_ref (match_operand 0 "" ""))))] "REVERSIBLE_CC_MODE (GET_MODE (XEXP (operands[1], 0)))" "* { if (arc_ccfsm_branch_deleted_p ()) { arc_ccfsm_record_branch_deleted (); return \"; branch deleted, next insns conditionalized\"; } else { arc_ccfsm_record_condition (operands[1], true, insn, 0); if (get_attr_length (insn) == 2) return \"b%D1%? %^%l0\"; else return \"b%D1%# %^%l0\"; } }" [(set_attr "type" "branch") (set (attr "length") (cond [ (eq_attr "delay_slot_filled" "yes") (const_int 4) (ne (if_then_else (match_operand 1 "equality_comparison_operator" "") (ior (lt (minus (match_dup 0) (pc)) (const_int -512)) (gt (minus (match_dup 0) (pc)) (minus (const_int 506) (symbol_ref "get_attr_delay_slot_length (insn)")))) (ior (match_test "!arc_short_comparison_p (operands[1], -64)") (lt (minus (match_dup 0) (pc)) (const_int -64)) (gt (minus (match_dup 0) (pc)) (minus (const_int 58) (symbol_ref "get_attr_delay_slot_length (insn)"))))) (const_int 0)) (const_int 4)] (const_int 2))) (set (attr "iscompact") (cond [(match_test "get_attr_length (insn) == 2") (const_string "true")] (const_string "false")))]) ;; Unconditional and other jump instructions. (define_expand "jump" [(set (pc) (label_ref (match_operand 0 "" "")))] "" "") (define_insn "jump_i" [(set (pc) (label_ref (match_operand 0 "" "")))] "!TARGET_LONG_CALLS_SET || !CROSSING_JUMP_P (insn)" "b%!%* %^%l0%&" [(set_attr "type" "uncond_branch") (set (attr "iscompact") (if_then_else (match_test "get_attr_length (insn) == 2") (const_string "true") (const_string "false"))) (set_attr "cond" "canuse") (set (attr "length") (cond [ ; In arc_reorg we just guesstimate; might be more or less than 4. (match_test "arc_branch_size_unknown_p ()") (const_int 4) (eq_attr "delay_slot_filled" "yes") (const_int 4) (match_test "CROSSING_JUMP_P (insn)") (const_int 4) (ior (lt (minus (match_dup 0) (pc)) (const_int -512)) (gt (minus (match_dup 0) (pc)) (minus (const_int 506) (symbol_ref "get_attr_delay_slot_length (insn)")))) (const_int 4)] (const_int 2)))]) (define_insn "indirect_jump" [(set (pc) (match_operand:SI 0 "nonmemory_operand" "L,I,Cal,Rcqq,r"))] "" "@ j%!%* %0%& j%!%* %0%& j%!%* %0%& j%!%* [%0]%& j%!%* [%0]%&" [(set_attr "type" "jump") (set_attr "iscompact" "false,false,false,maybe,false") (set_attr "cond" "canuse,canuse_limm,canuse,canuse,canuse")]) ;; Implement a switch statement. (define_expand "casesi" [(match_operand:SI 0 "register_operand" "") ; Index (match_operand:SI 1 "const_int_operand" "") ; Lower bound (match_operand:SI 2 "const_int_operand" "") ; Total range (match_operand:SI 3 "" "") ; Table label (match_operand:SI 4 "" "")] ; Out of range label "" { if (operands[1] != const0_rtx) { rtx reg = gen_reg_rtx (SImode); emit_insn (gen_subsi3 (reg, operands[0], operands[1])); operands[0] = reg; } emit_jump_insn (gen_cbranchsi4 (gen_rtx_GTU (SImode, operands[0], operands[2]), operands[0], operands[2], operands[4])); if (TARGET_BI_BIH) emit_jump_insn (gen_casesi_dispatch (operands[0], operands[3])); else { rtx reg = gen_reg_rtx (SImode); rtx lbl = operands[3]; operands[3] = gen_rtx_LABEL_REF (VOIDmode, operands[3]); if (flag_pic) operands[3] = force_reg (Pmode, operands[3]); emit_insn (gen_casesi_load (reg, operands[3], operands[0], lbl)); if (CASE_VECTOR_PC_RELATIVE || flag_pic) emit_insn (gen_addsi3 (reg, reg, operands[3])); emit_jump_insn (gen_casesi_jump (reg, lbl)); } DONE; }) (define_insn "casesi_dispatch" [(set (pc) (unspec:SI [(match_operand:SI 0 "register_operand" "r") (label_ref (match_operand 1 "" ""))] UNSPEC_ARC_CASESI))] "TARGET_BI_BIH" { rtx diff_vec = PATTERN (next_nonnote_insn (as_a (operands[1]))); gcc_assert (GET_CODE (diff_vec) == ADDR_DIFF_VEC); switch (GET_MODE (diff_vec)) { case E_SImode: return \"bi\\t[%0]\"; case E_HImode: case E_QImode: return \"bih\\t[%0]\"; default: gcc_unreachable (); } } [(set_attr "type" "brcc_no_delay_slot") (set_attr "iscompact" "false") (set_attr "length" "4")]) (define_insn "casesi_load" [(set (match_operand:SI 0 "register_operand" "=q,r,r") (mem:SI (unspec:SI [(match_operand:SI 1 "nonmemory_operand" "q,r,Cal") (match_operand:SI 2 "register_operand" "q,r,r")] UNSPEC_ARC_CASESI))) (use (label_ref (match_operand 3 "" "")))] "" "* { rtx diff_vec = PATTERN (next_nonnote_insn (as_a (operands[3]))); if (GET_CODE (diff_vec) != ADDR_DIFF_VEC) { gcc_assert (GET_CODE (diff_vec) == ADDR_VEC); gcc_assert (GET_MODE (diff_vec) == SImode); gcc_assert (!CASE_VECTOR_PC_RELATIVE && !flag_pic); } switch (GET_MODE (diff_vec)) { case E_SImode: return \"ld.as\\t%0,[%1,%2]%&\"; case E_HImode: if (ADDR_DIFF_VEC_FLAGS (diff_vec).offset_unsigned) return \"ld%_.as\\t%0,[%1,%2]\"; return \"ld%_.x.as\\t%0,[%1,%2]\"; case E_QImode: if (ADDR_DIFF_VEC_FLAGS (diff_vec).offset_unsigned) return \"ldb%?\\t%0,[%1,%2]%&\"; return \"ldb.x\\t%0,[%1,%2]\"; default: gcc_unreachable (); } }" [(set_attr "type" "load") (set_attr_alternative "iscompact" [(cond [(ne (symbol_ref "GET_MODE (PATTERN (next_nonnote_insn (as_a (operands[3]))))") (symbol_ref "QImode")) (const_string "false") (match_test "!ADDR_DIFF_VEC_FLAGS (PATTERN (next_nonnote_insn (as_a (operands[3])))).offset_unsigned") (const_string "false")] (const_string "true")) (const_string "false") (const_string "false")]) (set_attr_alternative "length" [(cond [(eq_attr "iscompact" "false") (const_int 4) ; We have to mention (match_dup 3) to convince genattrtab.cc that this ; is a varying length insn. (eq (symbol_ref "1+1") (const_int 2)) (const_int 2) (gt (minus (match_dup 3) (pc)) (const_int 42)) (const_int 4)] (const_int 2)) (const_int 4) (const_int 8)])]) ; Unlike the canonical tablejump, this pattern always uses a jump address, ; even for CASE_VECTOR_PC_RELATIVE. (define_insn "casesi_jump" [(set (pc) (match_operand:SI 0 "register_operand" "Cal,Rcqq,c")) (use (label_ref (match_operand 1 "" "")))] "" "j%!%* [%0]%&" [(set_attr "type" "jump") (set_attr "iscompact" "false,maybe,false") (set_attr "cond" "canuse")]) (define_expand "call" ;; operands[1] is stack_size_rtx ;; operands[2] is next_arg_register [(parallel [(call (match_operand:SI 0 "call_operand" "") (match_operand 1 "" "")) (clobber (reg:SI 31))])] "" "{ rtx callee; gcc_assert (MEM_P (operands[0])); callee = XEXP (operands[0], 0); /* This is to decide if we should generate indirect calls by loading the 32 bit address of the callee into a register before performing the branch and link - this exposes cse opportunities. Also, in weird cases like compile/20010107-1.c, we may get a PLUS. */ if (GET_CODE (callee) != REG && (GET_CODE (callee) == PLUS || arc_is_longcall_p (callee))) XEXP (operands[0], 0) = force_reg (Pmode, callee); } ") ; Rcq, which is used in alternative 0, checks for conditional execution. ; At instruction output time, if it doesn't match and we end up with ; alternative 1 ("q"), that means that we can't use the short form. (define_insn "*call_i" [(call (mem:SI (match_operand:SI 0 "call_address_operand" "Rcq,q,c,Cji,Csc,Cbp,Cbr,L,I,Cal")) (match_operand 1 "" "")) (clobber (reg:SI 31))] "" "@ jl%!%* [%0]%& jl%!%* [%0]%& jl%!%* [%0] jli_s %S0 sjli %S0 bl%!%* %P0 bl%!%* %P0 jl%!%* %0 jl%* %0 jl%! %0" [(set_attr "type" "call,call,call,call_no_delay_slot,call_no_delay_slot,call,call,call,call,call_no_delay_slot") (set_attr "iscompact" "maybe,false,*,true,*,*,*,*,*,*") (set_attr "predicable" "no,no,yes,no,no,yes,no,yes,no,yes") (set_attr "length" "*,*,4,2,4,4,4,4,4,8")]) (define_expand "call_value" ;; operand 2 is stack_size_rtx ;; operand 3 is next_arg_register [(parallel [(set (match_operand 0 "dest_reg_operand" "=r") (call (match_operand:SI 1 "call_operand" "") (match_operand 2 "" ""))) (clobber (reg:SI 31))])] "" " { rtx callee; gcc_assert (MEM_P (operands[1])); callee = XEXP (operands[1], 0); /* See the comment in define_expand \"call\". */ if (GET_CODE (callee) != REG && (GET_CODE (callee) == PLUS || arc_is_longcall_p (callee))) XEXP (operands[1], 0) = force_reg (Pmode, callee); }") ; Rcq, which is used in alternative 0, checks for conditional execution. ; At instruction output time, if it doesn't match and we end up with ; alternative 1 ("q"), that means that we can't use the short form. (define_insn "*call_value_i" [(set (match_operand 0 "dest_reg_operand" "=Rcq,q,w, w, w, w, w,w,w, w") (call (mem:SI (match_operand:SI 1 "call_address_operand" "Rcq,q,c,Cji,Csc,Cbp,Cbr,L,I,Cal")) (match_operand 2 "" ""))) (clobber (reg:SI 31))] "" "@ jl%!%* [%1]%& jl%!%* [%1]%& jl%!%* [%1] jli_s %S1 sjli %S1 bl%!%* %P1;1 bl%!%* %P1;1 jl%!%* %1 jl%* %1 jl%! %1" [(set_attr "type" "call,call,call,call_no_delay_slot,call_no_delay_slot,call,call,call,call,call_no_delay_slot") (set_attr "iscompact" "maybe,false,*,true,false,*,*,*,*,*") (set_attr "predicable" "no,no,yes,no,no,yes,no,yes,no,yes") (set_attr "length" "*,*,4,2,4,4,4,4,4,8")]) ; There is a bl_s instruction (16 bit opcode branch-and-link), but we can't ; use it for lack of inter-procedural branch shortening. ; Link-time relaxation would help... (define_insn "trap" [(trap_if (const_int 1) (const_int 0))] "!TARGET_ARC600_FAMILY" "trap_s\\t5" [(set_attr "type" "misc") (set_attr "length" "2")]) (define_insn "nop" [(const_int 0)] "" "nop%?" [(set_attr "type" "misc") (set_attr "iscompact" "true") (set_attr "cond" "canuse") (set_attr "length" "2")]) (define_insn "nopv" [(unspec_volatile [(const_int 0)] VUNSPEC_ARC_NOP)] "" "nop%?" [(set_attr "type" "misc") (set_attr "iscompact" "maybe") (set_attr "length" "*")]) (define_insn "blockage" [(unspec_volatile [(const_int 0)] VUNSPEC_ARC_BLOCKAGE)] "" "" [(set_attr "length" "0") (set_attr "type" "block")] ) (define_insn "arc600_stall" [(unspec_volatile [(const_int 0)] VUNSPEC_ARC_ARC600_STALL)] "TARGET_MUL64_SET" "mov\\t0,mlo\t;wait until multiply complete." [(set_attr "length" "4") (set_attr "type" "move")] ) ;; Split up troublesome insns for better scheduling. ;; Peepholes go at the end. ;;asl followed by add can be replaced by an add{1,2,3} ;; Three define_peepholes have been added for this optimization ;; ??? This used to target non-canonical rtl. Now we use add_n, which ;; can be generated by combine. Check if these peepholes still provide ;; any benefit. ;; ------------------------------------------------------------- ;; Pattern 1 : r0 = r1 << {i} ;; r3 = r4/INT + r0 ;;and commutative ;; || ;; \/ ;; add{i} r3,r4/INT,r1 ;; ------------------------------------------------------------- ;; ??? This should be covered by combine, alas, at times combine gets ;; too clever for it's own good: when the shifted input is known to be ;; either 0 or 1, the operation will be made into an if-then-else, and ;; thus fail to match the add_n pattern. Example: _mktm_r, line 85 in ;; newlib/libc/time/mktm_r.c . (define_peephole2 [(set (match_operand:SI 0 "dest_reg_operand" "") (ashift:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "_1_2_3_operand" ""))) (set (match_operand:SI 3 "dest_reg_operand" "") (plus:SI (match_operand:SI 4 "arc_nonmemory_operand" "") (match_operand:SI 5 "arc_nonmemory_operand" "")))] "(true_regnum (operands[4]) == true_regnum (operands[0]) || true_regnum (operands[5]) == true_regnum (operands[0])) && (peep2_reg_dead_p (2, operands[0]) || (true_regnum (operands[3]) == true_regnum (operands[0])))" ;; the preparation statements take care to put proper operand in ;; operands[4] operands[4] will always contain the correct ;; operand. This is added to satisfy commutativity [(set (match_dup 3) (plus:SI (mult:SI (match_dup 1) (match_dup 2)) (match_dup 4)))] "if (true_regnum (operands[4]) == true_regnum (operands[0])) operands[4] = operands[5]; operands[2] = GEN_INT (1 << INTVAL (operands[2]));" ) ;; ------------------------------------------------------------- ;; Pattern 1 : r0 = r1 << {i} ;; r3 = r4 - r0 ;; || ;; \/ ;; sub{i} r3,r4,r1 ;; ------------------------------------------------------------- ;; ??? This should be covered by combine, alas, at times combine gets ;; too clever for it's own good: when the shifted input is known to be ;; either 0 or 1, the operation will be made into an if-then-else, and ;; thus fail to match the sub_n pattern. Example: __ieee754_yn, line 239 in ;; newlib/libm/math/e_jn.c . (define_peephole2 [(set (match_operand:SI 0 "dest_reg_operand" "") (ashift:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "const_int_operand" ""))) (set (match_operand:SI 3 "dest_reg_operand" "") (minus:SI (match_operand:SI 4 "nonmemory_operand" "") (match_dup 0)))] "(INTVAL (operands[2]) == 1 || INTVAL (operands[2]) == 2 || INTVAL (operands[2]) == 3) && (peep2_reg_dead_p (2, operands[0]) || (true_regnum (operands[3]) == true_regnum (operands[0])))" [(set (match_dup 3) (minus:SI (match_dup 4) (mult:SI (match_dup 1) (match_dup 2))))] "operands[2] = GEN_INT (1 << INTVAL (operands[2]));" ) ; When using the high single bit, the result of a multiply is either ; the original number or zero. But MPY costs 4 cycles, which we ; can replace with the 2 cycles for the pair of TST_S and ADD.NE. (define_peephole2 [(set (match_operand:SI 0 "dest_reg_operand" "") (lshiftrt:SI (match_operand:SI 1 "register_operand" "") (const_int 31))) (set (match_operand:SI 4 "register_operand" "") (mult:SI (match_operand:SI 2 "register_operand") (match_operand:SI 3 "nonmemory_operand" "")))] "TARGET_ARC700_MPY && (rtx_equal_p (operands[0], operands[2]) || rtx_equal_p (operands[0], operands[3])) && peep2_regno_dead_p (0, CC_REG) && (rtx_equal_p (operands[0], operands[4]) || (peep2_reg_dead_p (2, operands[0]) && peep2_reg_dead_p (1, operands[4])))" [(parallel [(set (reg:CC_Z CC_REG) (compare:CC_Z (lshiftrt:SI (match_dup 1) (const_int 31)) (const_int 0))) (set (match_dup 4) (lshiftrt:SI (match_dup 1) (const_int 31)))]) (cond_exec (ne (reg:CC_Z CC_REG) (const_int 0)) (set (match_dup 4) (match_dup 5)))] { if (!rtx_equal_p (operands[0], operands[2])) operands[5] = operands[2]; else if (!rtx_equal_p (operands[0], operands[3])) operands[5] = operands[3]; else operands[5] = operands[4]; /* Actually a no-op... presumably rare. */ }) (define_peephole2 [(set (match_operand:SI 0 "dest_reg_operand" "") (lshiftrt:SI (match_operand:SI 1 "register_operand" "") (const_int 31))) (set (match_operand:SI 4 "register_operand" "") (mult:SI (match_operand:SI 2 "register_operand") (match_operand:SI 3 "nonmemory_operand" "")))] "TARGET_ARC700_MPY && (rtx_equal_p (operands[0], operands[2]) || rtx_equal_p (operands[0], operands[3])) && peep2_regno_dead_p (2, CC_REG)" [(parallel [(set (reg:CC_Z CC_REG) (compare:CC_Z (lshiftrt:SI (match_dup 1) (const_int 31)) (const_int 0))) (set (match_dup 0) (lshiftrt:SI (match_dup 1) (const_int 31)))]) (set (match_dup 4) (match_dup 5)) (cond_exec (eq (reg:CC_Z CC_REG) (const_int 0)) (set (match_dup 4) (const_int 0)))] "operands[5] = operands[rtx_equal_p (operands[0], operands[2]) ? 3 : 2];") ;; Instructions generated through builtins (define_insn "clrsbsi2" [(set (match_operand:SI 0 "dest_reg_operand" "=r,r") (clrsb:SI (match_operand:SI 1 "general_operand" "rL,Cal")))] "TARGET_NORM" "norm\\t%0,%1" [(set_attr "length" "4,8") (set_attr "type" "two_cycle_core,two_cycle_core")]) (define_insn "norm_f" [(set (match_operand:SI 0 "dest_reg_operand" "=r,r") (clrsb:SI (match_operand:SI 1 "general_operand" "rL,Cal"))) (set (reg:CC_ZN CC_REG) (compare:CC_ZN (match_dup 1) (const_int 0)))] "TARGET_NORM" "norm.f\\t%0,%1" [(set_attr "length" "4,8") (set_attr "type" "two_cycle_core,two_cycle_core")]) (define_insn_and_split "clrsbhi2" [(set (match_operand:HI 0 "dest_reg_operand" "=w,w") (clrsb:HI (match_operand:HI 1 "general_operand" "cL,Cal")))] "TARGET_NORM" "#" "reload_completed" [(set (match_dup 0) (zero_extend:SI (clrsb:HI (match_dup 1))))] "operands[0] = simplify_gen_subreg (SImode, operands[0], HImode, 0);") (define_insn "normw" [(set (match_operand:SI 0 "dest_reg_operand" "=w,w") (zero_extend:SI (clrsb:HI (match_operand:HI 1 "general_operand" "cL,Cal"))))] "TARGET_NORM" "@ norm%_ \t%0, %1 norm%_ \t%0, %1" [(set_attr "length" "4,8") (set_attr "type" "two_cycle_core,two_cycle_core")]) (define_expand "clzsi2" [(parallel [(set (match_operand:SI 0 "register_operand" "") (clz:SI (match_operand:SI 1 "register_operand" ""))) (clobber (match_dup 2))])] "TARGET_NORM" " if (TARGET_V2) { /* ARCv2's FLS is a bit more optimal than using norm. */ rtx tmp = gen_reg_rtx (SImode); emit_insn (gen_fls (tmp, operands[1])); emit_insn (gen_subsi3 (operands[0], GEN_INT (31), tmp)); DONE; } operands[2] = gen_rtx_REG (CC_ZNmode, CC_REG); ") (define_insn_and_split "*arc_clzsi2" [(set (match_operand:SI 0 "register_operand" "=r") (clz:SI (match_operand:SI 1 "register_operand" "r"))) (clobber (reg:CC_ZN CC_REG))] "TARGET_NORM" "#" "reload_completed" [(const_int 0)] { emit_insn (gen_norm_f (operands[0], operands[1])); emit_insn (gen_rtx_COND_EXEC (VOIDmode, gen_rtx_LT (VOIDmode, gen_rtx_REG (CC_ZNmode, CC_REG), const0_rtx), gen_rtx_SET (operands[0], const0_rtx))); emit_insn (gen_rtx_COND_EXEC (VOIDmode, gen_rtx_GE (VOIDmode, gen_rtx_REG (CC_ZNmode, CC_REG), const0_rtx), gen_rtx_SET (operands[0], plus_constant (SImode, operands[0], 1)))); DONE; } [(set_attr "type" "unary") (set_attr "length" "12")]) (define_expand "ctzsi2" [(match_operand:SI 0 "register_operand" "") (match_operand:SI 1 "register_operand" "")] "TARGET_NORM" " if (TARGET_V2) { emit_insn (gen_ffs (operands[0], operands[1])); DONE; } emit_insn (gen_arc_ctzsi2 (operands[0], operands[1])); DONE; ") (define_insn_and_split "arc_ctzsi2" [(set (match_operand:SI 0 "register_operand" "=r") (ctz:SI (match_operand:SI 1 "register_operand" "r"))) (clobber (reg:CC_ZN CC_REG)) (clobber (match_scratch:SI 2 "=&r"))] "TARGET_NORM" "#" "reload_completed" [(const_int 0)] { rtx temp = operands[0]; if (reg_overlap_mentioned_p (temp, operands[1]) || (REGNO (temp) < FIRST_PSEUDO_REGISTER && !TEST_HARD_REG_BIT (reg_class_contents[GENERAL_REGS], REGNO (temp)))) temp = operands[2]; emit_insn (gen_addsi3 (temp, operands[1], constm1_rtx)); emit_insn (gen_bic_f_zn (temp, temp, operands[1])); emit_insn (gen_clrsbsi2 (operands[0], temp)); emit_insn (gen_rtx_COND_EXEC (VOIDmode, gen_rtx_LT (VOIDmode, gen_rtx_REG (CC_ZNmode, CC_REG), const0_rtx), gen_rtx_SET (operands[0], GEN_INT (32)))); emit_insn (gen_rtx_COND_EXEC (VOIDmode, gen_rtx_GE (VOIDmode, gen_rtx_REG (CC_ZNmode, CC_REG), const0_rtx), gen_rtx_SET (operands[0], gen_rtx_MINUS (SImode, GEN_INT (31), operands[0])))); DONE; } [(set_attr "type" "unary") (set_attr "length" "20")]) (define_insn "swap" [(set (match_operand:SI 0 "dest_reg_operand" "=w,w,w") (unspec:SI [(match_operand:SI 1 "general_operand" "L,Cal,c")] UNSPEC_ARC_SWAP))] "TARGET_SWAP" "@ swap \t%0, %1 swap \t%0, %1 swap \t%0, %1" [(set_attr "length" "4,8,4") (set_attr "type" "two_cycle_core,two_cycle_core,two_cycle_core")]) (define_insn "divaw" [(set (match_operand:SI 0 "dest_reg_operand" "=&w,&w,&w") (unspec:SI [(div:SI (match_operand:SI 1 "general_operand" "r,Cal,r") (match_operand:SI 2 "general_operand" "r,r,Cal"))] UNSPEC_ARC_DIVAW))] "TARGET_ARC700 || TARGET_EA_SET" "@ divaw \t%0, %1, %2 divaw \t%0, %1, %2 divaw \t%0, %1, %2" [(set_attr "length" "4,8,8") (set_attr "type" "divaw,divaw,divaw")]) (define_insn "flag" [(unspec_volatile [(match_operand:SI 0 "nonmemory_operand" "rL,I,Cal")] VUNSPEC_ARC_FLAG)] "" "@ flag%? %0 flag %0 flag%? %0" [(set_attr "length" "4,4,8") (set_attr "type" "misc,misc,misc") (set_attr "predicable" "yes,no,yes") (set_attr "cond" "clob,clob,clob")]) (define_insn "brk" [(unspec_volatile [(match_operand:SI 0 "immediate_operand" "N")] VUNSPEC_ARC_BRK)] "" "brk" [(set_attr "length" "4") (set_attr "type" "misc")]) (define_insn "rtie" [(return) (unspec_volatile [(const_int 0)] VUNSPEC_ARC_RTIE)] "!TARGET_ARC600_FAMILY" "rtie" [(set_attr "length" "4") (set_attr "type" "rtie") (set_attr "cond" "clob")]) (define_insn "sync" [(unspec_volatile [(match_operand:SI 0 "immediate_operand" "N")] VUNSPEC_ARC_SYNC)] "" "sync" [(set_attr "length" "4") (set_attr "type" "misc")]) (define_insn "swi" [(unspec_volatile [(match_operand:SI 0 "immediate_operand" "N")] VUNSPEC_ARC_SWI)] "" "* { if(TARGET_ARC700) return \"trap0\"; else return \"swi\"; }" [(set_attr "length" "4") (set_attr "type" "misc")]) (define_insn "sleep" [(unspec_volatile [(match_operand:SI 0 "nonmemory_operand" "Lr")] VUNSPEC_ARC_SLEEP)] "" "sleep %0" [(set_attr "length" "4") (set_attr "type" "misc")]) (define_insn "core_read" [(set (match_operand:SI 0 "dest_reg_operand" "=r,r") (unspec_volatile:SI [(match_operand:SI 1 "general_operand" "Hn,!r")] VUNSPEC_ARC_CORE_READ))] "" "* if (check_if_valid_regno_const (operands, 1)) return \"mov \t%0, r%1\"; return \"mov \t%0, r%1\"; " [(set_attr "length" "4") (set_attr "type" "unary")]) (define_insn "core_write" [(unspec_volatile [(match_operand:SI 0 "general_operand" "r,r") (match_operand:SI 1 "general_operand" "Hn,!r")] VUNSPEC_ARC_CORE_WRITE)] "" "* if (check_if_valid_regno_const (operands, 1)) return \"mov \tr%1, %0\"; return \"mov \tr%1, %0\"; " [(set_attr "length" "4") (set_attr "type" "unary")]) (define_insn "lr" [(set (match_operand:SI 0 "dest_reg_operand" "=r,r,r,r") (unspec_volatile:SI [(match_operand:SI 1 "general_operand" "I,HCal,r,D")] VUNSPEC_ARC_LR))] "" "lr\t%0, [%1]" [(set_attr "length" "4,8,4,8") (set_attr "type" "lr,lr,lr,lr")]) (define_insn "sr" [(unspec_volatile [(match_operand:SI 0 "general_operand" "Cal,r,r,r") (match_operand:SI 1 "general_operand" "Ir,I,HCal,r")] VUNSPEC_ARC_SR)] "" "sr\t%0, [%1]" [(set_attr "length" "8,4,8,4") (set_attr "type" "sr,sr,sr,sr")]) (define_mode_iterator ALLI [QI HI SI (DI "TARGET_LL64")]) (define_mode_attr mALLI [(QI "b") (HI "%_") (SI "") (DI "d")]) (define_insn "lddi" [(set (match_operand:ALLI 0 "register_operand" "=r") (unspec_volatile:ALLI [(match_operand:ALLI 1 "memory_operand" "m")] VUNSPEC_ARC_LDDI))] "" "ld%U1.di\\t%0,%1" [(set_attr "type" "load")]) (define_insn "stdi" [(unspec_volatile [(match_operand:ALLI 0 "memory_operand" "m,m,Usc") (match_operand:ALLI 1 "nonmemory_operand" "r,Cm3,i")] VUNSPEC_ARC_STDI)] "" "st%U0.di\\t%1,%0" [(set_attr "length" "*,*,8") (set_attr "type" "store")]) (define_insn_and_split "*stdidi_split" [(unspec_volatile [(match_operand:DI 0 "memory_operand" "m") (match_operand:DI 1 "register_operand" "r")] VUNSPEC_ARC_STDI)] "!TARGET_LL64" "#" "&& reload_completed" [(unspec_volatile:SI [(match_dup 2) (match_dup 3)] VUNSPEC_ARC_STDI) (unspec_volatile:SI [(match_dup 4) (match_dup 5)] VUNSPEC_ARC_STDI)] " { operands[3] = gen_lowpart (SImode, operands[1]); operands[5] = gen_highpart_mode (SImode, DImode, operands[1]); operands[2] = gen_lowpart (SImode, operands[0]); operands[4] = gen_highpart (SImode, operands[0]); } " ) (define_insn_and_split "*lddidi_split" [(set (match_operand:DI 0 "register_operand" "=r") (unspec_volatile:DI [(match_operand:DI 1 "memory_operand" "m")] VUNSPEC_ARC_LDDI))] "!TARGET_LL64" "#" "&& reload_completed" [(set (match_dup 2) (unspec_volatile:SI [(match_dup 3)] VUNSPEC_ARC_LDDI)) (set (match_dup 4) (unspec_volatile:SI [(match_dup 5)] VUNSPEC_ARC_LDDI))] " { operands[3] = gen_lowpart (SImode, operands[1]); operands[5] = gen_highpart (SImode, operands[1]); operands[2] = gen_lowpart (SImode, operands[0]); operands[4] = gen_highpart (SImode, operands[0]); } " ) (define_insn "trap_s" [(unspec_volatile [(match_operand:SI 0 "immediate_operand" "L,Cal")] VUNSPEC_ARC_TRAP_S)] "!TARGET_ARC600_FAMILY" { if (which_alternative == 0) { arc_toggle_unalign (); return \"trap_s %0\"; } /* Keep this message in sync with the one in arc.cc:arc_expand_builtin, because *.md files do not get scanned by exgettext. */ fatal_error (input_location, \"operand to % should be an unsigned 6-bit value\"); } [(set_attr "length" "2") (set_attr "type" "misc")]) (define_insn "unimp_s" [(unspec_volatile [(match_operand:SI 0 "immediate_operand" "N")] VUNSPEC_ARC_UNIMP_S)] "!TARGET_ARC600_FAMILY" "unimp_s" [(set_attr "length" "4") (set_attr "type" "misc")]) ;; End of instructions generated through builtins ; Since the demise of REG_N_SETS as reliable data readily available to the ; target, it is no longer possible to find out ; in the prologue / epilogue expanders how many times blink is set. ; Using df_regs_ever_live_p to decide if blink needs saving means that ; any explicit use of blink will cause it to be saved; hence we cannot ; represent the blink use in return / sibcall instructions themselves, and ; instead have to show it in EPILOGUE_USES and must explicitly ; forbid instructions that change blink in the return / sibcall delay slot. (define_expand "sibcall" [(parallel [(call (match_operand 0 "memory_operand" "") (match_operand 1 "general_operand" "")) (simple_return) (use (match_operand 2 "" ""))])] "" " { rtx callee = XEXP (operands[0], 0); if (operands[2] == NULL_RTX) operands[2] = const0_rtx; if (GET_CODE (callee) != REG && (GET_CODE (callee) == PLUS || arc_is_longcall_p (callee))) XEXP (operands[0], 0) = force_reg (Pmode, callee); }" ) (define_expand "sibcall_value" [(parallel [(set (match_operand 0 "dest_reg_operand" "") (call (match_operand 1 "memory_operand" "") (match_operand 2 "general_operand" ""))) (simple_return) (use (match_operand 3 "" ""))])] "" " { rtx callee = XEXP (operands[1], 0); if (operands[3] == NULL_RTX) operands[3] = const0_rtx; if (GET_CODE (callee) != REG && arc_is_longcall_p (callee)) XEXP (operands[1], 0) = force_reg (Pmode, callee); }" ) (define_insn "*sibcall_insn" [(call (mem:SI (match_operand:SI 0 "call_address_operand" "Cbp,Cbr,!Rcd,Rsc,Cal")) (match_operand 1 "" "")) (simple_return) (use (match_operand 2 "" ""))] "" "@ b%!%*\\t%P0 b%!%*\\t%P0 j%!%*\\t[%0] j%!%*\\t[%0] j%!\\t%P0" [(set_attr "type" "call,call,call,call,call_no_delay_slot") (set_attr "predicable" "yes,no,no,yes,yes") (set_attr "iscompact" "false,false,maybe,false,false") (set_attr "is_SIBCALL" "yes")] ) (define_insn "*sibcall_value_insn" [(set (match_operand 0 "dest_reg_operand" "") (call (mem:SI (match_operand:SI 1 "call_address_operand" "Cbp,Cbr,!Rcd,Rsc,Cal")) (match_operand 2 "" ""))) (simple_return) (use (match_operand 3 "" ""))] "" "@ b%!%*\\t%P1 b%!%*\\t%P1 j%!%*\\t[%1] j%!%*\\t[%1] j%!\\t%P1" [(set_attr "type" "call,call,call,call,call_no_delay_slot") (set_attr "predicable" "yes,no,no,yes,yes") (set_attr "iscompact" "false,false,maybe,false,false") (set_attr "is_SIBCALL" "yes")] ) (define_expand "prologue" [(pc)] "" { arc_expand_prologue (); DONE; }) (define_expand "epilogue" [(pc)] "" { arc_expand_epilogue (0); DONE; }) (define_expand "sibcall_epilogue" [(pc)] "" { arc_expand_epilogue (1); DONE; }) ; Since the demise of REG_N_SETS, it is no longer possible to find out ; in the prologue / epilogue expanders how many times blink is set. ; Using df_regs_ever_live_p to decide if blink needs saving means that ; any explicit use of blink will cause it to be saved; hence we cannot ; represent the blink use in return / sibcall instructions themselves, and ; instead have to show it in EPILOGUE_USES and must explicitly ; forbid instructions that change blink in the return / sibcall delay slot. (define_insn "simple_return" [(simple_return)] "" "j%!%*\\t[blink]" [(set_attr "type" "return") (set_attr "cond" "canuse") (set_attr "iscompact" "maybe") (set_attr "length" "*")]) (define_insn "arc600_rtie" [(return) (unspec_volatile [(match_operand 0 "pmode_register_operand" "")] VUNSPEC_ARC_ARC600_RTIE)] "TARGET_ARC600_FAMILY" "j.f\\t[%0]" [(set_attr "length" "4") (set_attr "type" "rtie") (set_attr "cond" "clob")]) (define_insn "p_return_i" [(set (pc) (if_then_else (match_operator 0 "proper_comparison_operator" [(reg CC_REG) (const_int 0)]) (simple_return) (pc)))] "reload_completed" { output_asm_insn (\"j%d0%!%#\\t[blink]\", operands); /* record the condition in case there is a delay insn. */ arc_ccfsm_record_condition (operands[0], false, insn, 0); return \"\"; } [(set_attr "type" "return") (set_attr "cond" "use") (set_attr "iscompact" "maybe" ) (set (attr "length") (cond [(not (match_operand 0 "equality_comparison_operator" "")) (const_int 4) (eq_attr "delay_slot_filled" "yes") (const_int 4)] (const_int 2)))]) ;; Return nonzero if this function is known to have a null epilogue. ;; This allows the optimizer to omit jumps to jumps if no stack ;; was created. (define_expand "return" [(return)] "arc_can_use_return_insn ()" "") ;; Comment in final.cc (insn_current_reference_address) says ;; forward branch addresses are calculated from the next insn after branch ;; and for backward branches, it is calculated from the branch insn start. ;; The shortening logic here is tuned to accomodate this behavior ;; ??? This should be grokked by the ccfsm machinery. (define_insn "cbranchsi4_scratch" [(set (pc) (if_then_else (match_operator 0 "proper_comparison_operator" [(match_operand:SI 1 "register_operand" "c,c, c") (match_operand:SI 2 "nonmemory_operand" "L,c,?Cal")]) (label_ref (match_operand 3 "" "")) (pc))) (clobber (match_operand 4 "cc_register" ""))] "(reload_completed || (TARGET_EARLY_CBRANCHSI && brcc_nolimm_operator (operands[0], VOIDmode))) && !CROSSING_JUMP_P (insn)" "* switch (get_attr_length (insn)) { case 2: return \"br%d0%? %1, %2, %^%l3%&\"; case 4: return \"br%d0%* %1, %B2, %^%l3\"; case 8: if (!brcc_nolimm_operator (operands[0], VOIDmode)) return \"br%d0%* %1, %B2, %^%l3\"; /* FALLTHRU */ case 6: case 10: case 12:return \"cmp%? %1, %B2\\n\\tb%d0%* %^%l3%& ;br%d0 out of range\"; default: fprintf (stderr, \"unexpected length %d\\n\", get_attr_length (insn)); fflush (stderr); gcc_unreachable (); } " [(set_attr "cond" "clob, clob, clob") (set (attr "type") (if_then_else (match_test "valid_brcc_with_delay_p (operands)") (const_string "brcc") (const_string "brcc_no_delay_slot"))) ; For forward branches, we need to account not only for the distance to ; the target, but also the difference between pcl and pc, the instruction ; length, and any delay insn, if present. (set (attr "length") (cond ; the outer cond does a test independent of branch shortening. [(match_operand 0 "brcc_nolimm_operator" "") (cond [(and (match_operand:CC_Z 4 "cc_register") (eq_attr "delay_slot_filled" "no") (ge (minus (match_dup 3) (pc)) (const_int -128)) (le (minus (match_dup 3) (pc)) (minus (const_int 122) (symbol_ref "get_attr_delay_slot_length (insn)")))) (const_int 2) (and (ge (minus (match_dup 3) (pc)) (const_int -256)) (le (minus (match_dup 3) (pc)) (minus (const_int 244) (symbol_ref "get_attr_delay_slot_length (insn)")))) (const_int 4) (and (match_operand:SI 1 "compact_register_operand" "") (match_operand:SI 2 "compact_hreg_operand" "")) (const_int 6)] (const_int 8))] (cond [(and (ge (minus (match_dup 3) (pc)) (const_int -256)) (le (minus (match_dup 3) (pc)) (const_int 244))) (const_int 8) (and (match_operand:SI 1 "compact_register_operand" "") (match_operand:SI 2 "compact_hreg_operand" "")) (const_int 10)] (const_int 12)))) (set (attr "iscompact") (if_then_else (match_test "get_attr_length (insn) & 2") (const_string "true") (const_string "false")))]) ; combiner pattern observed for unwind-dw2-fde.c:linear_search_fdes. (define_insn "*bbit" [(set (pc) (if_then_else (match_operator 3 "equality_comparison_operator" [(zero_extract:SI (match_operand:SI 1 "register_operand" "Rcqq,c") (const_int 1) (match_operand:SI 2 "nonmemory_operand" "L,Lc")) (const_int 0)]) (label_ref (match_operand 0 "" "")) (pc))) (clobber (reg:CC_ZN CC_REG))] "!CROSSING_JUMP_P (insn)" { switch (get_attr_length (insn)) { case 4: return (GET_CODE (operands[3]) == EQ ? \"bbit0%* %1,%2,%0\" : \"bbit1%* %1,%2,%0\"); case 6: case 8: return \"btst%? %1,%2\n\tb%d3%* %0; bbit out of range\"; default: gcc_unreachable (); } } [(set_attr "type" "brcc") (set_attr "cond" "clob") (set (attr "length") (cond [(and (ge (minus (match_dup 0) (pc)) (const_int -254)) (le (minus (match_dup 0) (pc)) (minus (const_int 248) (symbol_ref "get_attr_delay_slot_length (insn)")))) (const_int 4) (eq (symbol_ref "which_alternative") (const_int 0)) (const_int 6)] (const_int 8))) (set (attr "iscompact") (if_then_else (match_test "get_attr_length (insn) == 6") (const_string "true") (const_string "false")))]) ;; ------------------------------------------------------------------- ;; Hardware loop ;; ------------------------------------------------------------------- ; operand 0 is the loop count pseudo register ; operand 1 is the label to jump to at the top of the loop (define_expand "doloop_end" [(parallel [(set (pc) (if_then_else (ne (match_operand 0 "nonimmediate_operand") (const_int 1)) (label_ref (match_operand 1 "" "")) (pc))) (set (match_dup 0) (plus:SI (match_dup 0) (const_int -1))) (unspec:SI [(const_int 0)] UNSPEC_ARC_LP) (clobber (match_dup 2))])] "" { if (GET_MODE (operands[0]) != SImode) FAIL; operands[2] = gen_rtx_SCRATCH (SImode); }) (define_insn "arc_lp" [(unspec:SI [(reg:SI LP_COUNT)] UNSPEC_ARC_LP) (use (label_ref (match_operand 0 "" ""))) (use (label_ref (match_operand 1 "" "")))] "" "lp\\t@%l1\\t; lp_count:@%l0->@%l1" [(set_attr "type" "loop_setup") (set_attr "length" "4")]) ;; if by any chance the lp_count is not used, then use an 'r' ;; register, instead of going to memory. ;; split pattern for the very slim chance when the loop register is ;; memory. (define_insn_and_split "loop_end" [(set (pc) (if_then_else (ne (match_operand:SI 0 "nonimmediate_operand" "+r,!m") (const_int 1)) (label_ref (match_operand 1 "" "")) (pc))) (set (match_dup 0) (plus:SI (match_dup 0) (const_int -1))) (unspec:SI [(const_int 0)] UNSPEC_ARC_LP) (clobber (match_scratch:SI 2 "=X,&r"))] "" "@ ; ZOL_END, begins @%l1 #" "reload_completed && memory_operand (operands[0], Pmode)" [(set (match_dup 2) (match_dup 0)) (parallel [(set (reg:CC_ZN CC_REG) (compare:CC_ZN (plus:SI (match_dup 2) (const_int -1)) (const_int 0))) (set (match_dup 2) (plus:SI (match_dup 2) (const_int -1)))]) (set (match_dup 0) (match_dup 2)) (set (pc) (if_then_else (ne (reg:CC_ZN CC_REG) (const_int 0)) (label_ref (match_dup 1)) (pc)))] "" [(set_attr "length" "0,24") (set_attr "predicable" "no") (set_attr "type" "loop_end")]) (define_insn "loop_fail" [(set (reg:SI LP_COUNT) (plus:SI (reg:SI LP_COUNT) (const_int -1))) (set (reg:CC_ZN CC_REG) (compare:CC_ZN (plus:SI (reg:SI LP_COUNT) (const_int -1)) (const_int 0)))] "" "sub.f%?\\tlp_count,lp_count,1" [(set_attr "iscompact" "false") (set_attr "type" "compare") (set_attr "cond" "set_zn") (set_attr "length" "4") (set_attr "predicable" "yes")]) (define_insn_and_split "dbnz" [(set (pc) (if_then_else (ne (plus:SI (match_operand:SI 0 "nonimmediate_operand" "+rl,m") (const_int -1)) (const_int 0)) (label_ref (match_operand 1 "" "")) (pc))) (set (match_dup 0) (plus:SI (match_dup 0) (const_int -1))) (clobber (match_scratch:SI 2 "=X,r"))] "TARGET_DBNZ" "@ dbnz%#\\t%0,%l1 #" "TARGET_DBNZ && reload_completed && memory_operand (operands[0], SImode)" [(set (match_dup 2) (match_dup 0)) (set (match_dup 2) (plus:SI (match_dup 2) (const_int -1))) (set (reg:CC CC_REG) (compare:CC (match_dup 2) (const_int 0))) (set (match_dup 0) (match_dup 2)) (set (pc) (if_then_else (ge (reg:CC CC_REG) (const_int 0)) (label_ref (match_dup 1)) (pc)))] "" [(set_attr "iscompact" "false") (set_attr "type" "loop_end") (set_attr "length" "4,20")]) (define_expand "cpymemsi" [(match_operand:BLK 0 "" "") (match_operand:BLK 1 "" "") (match_operand:SI 2 "nonmemory_operand" "") (match_operand 3 "immediate_operand" "")] "" "if (arc_expand_cpymem (operands)) DONE; else FAIL;") ;; Close http://gcc.gnu.org/bugzilla/show_bug.cgi?id=35803 if this works ;; to the point that we can generate cmove instructions. (define_expand "cbranch4" [(set (reg:CC CC_REG) (compare:CC (match_operand:SDF 1 "register_operand" "") (match_operand:SDF 2 "register_operand" ""))) (set (pc) (if_then_else (match_operator 0 "comparison_operator" [(reg CC_REG) (const_int 0)]) (label_ref (match_operand 3 "" "")) (pc)))] "TARGET_FP_SP_BASE || TARGET_OPTFPE" { gcc_assert (XEXP (operands[0], 0) == operands[1]); gcc_assert (XEXP (operands[0], 1) == operands[2]); operands[0] = gen_compare_reg (operands[0], VOIDmode); emit_jump_insn (gen_branch_insn (operands[3], operands[0])); DONE; }) (define_expand "cmp_float" [(parallel [(set (match_operand 0 "") (match_operand 1 "")) (clobber (reg:SI RETURN_ADDR_REGNUM)) (clobber (reg:SI R12_REG))])] "" "") (define_mode_iterator OPTFPE_CMP [CC_Z CC_FP_GT CC_FP_GE CC_FP_UNEQ CC_FP_ORD]) (define_mode_attr cmp [(CC_Z "eq") (CC_FP_GT "gt") (CC_FP_GE "ge") (CC_FP_UNEQ "uneq") (CC_FP_ORD "ord")]) (define_insn "*cmpsf_" [(set (reg:OPTFPE_CMP CC_REG) (compare:OPTFPE_CMP (reg:SF 0) (reg:SF 1))) (clobber (reg:SI RETURN_ADDR_REGNUM)) (clobber (reg:SI R12_REG))] "TARGET_OPTFPE && (!TARGET_ARGONAUT_SET || !TARGET_SPFP) && SFUNC_CHECK_PREDICABLE" "*return arc_output_libcall (\"__sf2\");" [(set_attr "is_sfunc" "yes") (set_attr "predicable" "yes")]) ;; N.B. for "*cmpdf_ord": ;; double precision fpx sets bit 31 for NaNs. We need bit 51 set ;; for the floating point emulation to recognize the NaN. (define_insn "*cmpdf_" [(set (reg:OPTFPE_CMP CC_REG) (compare:OPTFPE_CMP (reg:DF 0) (reg:DF 2))) (clobber (reg:SI RETURN_ADDR_REGNUM)) (clobber (reg:SI R12_REG))] "TARGET_OPTFPE && (!TARGET_ARGONAUT_SET || !TARGET_DPFP) && SFUNC_CHECK_PREDICABLE" "*return arc_output_libcall (\"__df2\");" [(set_attr "is_sfunc" "yes") (set_attr "predicable" "yes")]) (define_insn "abssf2" [(set (match_operand:SF 0 "dest_reg_operand" "=Rcq#q,Rcw,w") (abs:SF (match_operand:SF 1 "register_operand" "0, 0,c")))] "" "bclr%? %0,%1,31%&" [(set_attr "type" "unary") (set_attr "iscompact" "maybe,false,false") (set_attr "length" "2,4,4") (set_attr "predicable" "no,yes,no")]) (define_insn "negsf2" [(set (match_operand:SF 0 "dest_reg_operand" "=Rcw,w") (neg:SF (match_operand:SF 1 "register_operand" "0,c")))] "" "bxor%? %0,%1,31" [(set_attr "type" "unary") (set_attr "predicable" "yes,no")]) ;; ??? Should this use arc_output_libcall and set is_sfunc? (define_insn "*millicode_thunk_st" [(match_parallel 0 "millicode_store_operation" [(set (mem:SI (reg:SI SP_REG)) (reg:SI 13))])] "" { output_asm_insn ("bl%* __st_r13_to_%0", &SET_SRC (XVECEXP (operands[0], 0, XVECLEN (operands[0], 0) - 2))); return ""; } [(set_attr "type" "call")]) (define_insn "*millicode_thunk_ld" [(match_parallel 0 "millicode_load_clob_operation" [(set (reg:SI 13) (mem:SI (reg:SI SP_REG)))])] "" { output_asm_insn ("bl%* __ld_r13_to_%0", &SET_DEST (XVECEXP (operands[0], 0, XVECLEN (operands[0], 0) - 2))); return ""; } [(set_attr "type" "call")]) ; the sibthunk restores blink, so we use the return rtx. (define_insn "*millicode_sibthunk_ld" [(match_parallel 0 "millicode_load_operation" [(return) (set (reg:SI SP_REG) (plus:SI (reg:SI SP_REG) (reg:SI 12))) (set (reg:SI 13) (mem:SI (reg:SI SP_REG)))])] "" { output_asm_insn ("b%* __ld_r13_to_%0_ret", &SET_DEST (XVECEXP (operands[0], 0, XVECLEN (operands[0], 0) - 1))); return ""; } [(set_attr "type" "call") (set_attr "is_SIBCALL" "yes")]) ;; For thread pointer builtins (define_expand "get_thread_pointersi" [(set (match_operand:SI 0 "register_operand") (match_dup 1))] "" "operands[1] = gen_rtx_REG (Pmode, arc_tp_regno);") (define_expand "set_thread_pointersi" [(set (match_dup 1) (match_operand:SI 0 "register_operand"))] "" "operands[1] = gen_rtx_REG (Pmode, arc_tp_regno);") ;; If hardware floating point is available, don't define a negdf pattern; ;; it would be something like: ;;(define_insn "negdf2" ;; [(set (match_operand:DF 0 "register_operand" "=w,w,D,?r") ;; (neg:DF (match_operand:DF 1 "register_operand" "0,c,D,D"))) ;; (clobber (match_scratch:DF 2 "=X,X,X,X,D1"))] ;; "" ;; "@ ;; bxor%? %H0,%H1,31 ;; bxor %H0,%H1,31 ` mov %L0,%L1 ;; drsubh%F0%F1 0,0,0 ;; drsubh%F2%F1 %H0,0,0 ` dexcl%F2 %L0,%H0,%L0" ;; [(set_attr "type" "unary,unary,dpfp_addsub,dpfp_addsub") ;; (set_attr "iscompact" "false,false,false,false") ;; (set_attr "length" "4,4,8,12") ;; (set_attr "cond" "canuse,nocond,nocond,nocond")]) ;; and this suffers from always requiring a long immediate when using ;; the floating point hardware. ;; We then want the sub[sd]f patterns to be used, so that we can load the ;; constant zero efficiently into a register when we want to do the ;; computation using the floating point hardware. There should be a special ;; subdf alternative that matches a zero operand 1, which then can allow ;; to use bxor to flip the high bit of an integer register. ;; ??? we actually can't use the floating point hardware for neg, because ;; this would not work right for -0. OTOH optabs.cc has already code ;; to synthesyze negate by flipping the sign bit. ;;V2 instructions (define_insn "bswapsi2" [(set (match_operand:SI 0 "register_operand" "= r,r") (bswap:SI (match_operand:SI 1 "nonmemory_operand" "rL,Cal")))] "TARGET_V2 && TARGET_SWAP" "swape %0, %1" [(set_attr "length" "4,8") (set_attr "type" "two_cycle_core")]) (define_expand "prefetch" [(prefetch (match_operand:SI 0 "address_operand" "") (match_operand:SI 1 "const_int_operand" "") (match_operand:SI 2 "const_int_operand" ""))] "TARGET_HS" "") (define_insn "prefetch_1" [(prefetch (match_operand:SI 0 "register_operand" "r") (match_operand:SI 1 "const_int_operand" "n") (match_operand:SI 2 "const_int_operand" "n"))] "TARGET_HS" { if (INTVAL (operands[1])) return "prefetchw [%0]"; else return "prefetch [%0]"; } [(set_attr "type" "load") (set_attr "length" "4")]) (define_insn "prefetch_2" [(prefetch (plus:SI (match_operand:SI 0 "register_operand" "r,r,r") (match_operand:SI 1 "nonmemory_operand" "r,Cm2,Cal")) (match_operand:SI 2 "const_int_operand" "n,n,n") (match_operand:SI 3 "const_int_operand" "n,n,n"))] "TARGET_HS" { if (INTVAL (operands[2])) return "prefetchw [%0, %1]"; else return "prefetch [%0, %1]"; } [(set_attr "type" "load") (set_attr "length" "4,4,8")]) (define_insn "prefetch_3" [(prefetch (match_operand:SI 0 "address_operand" "p") (match_operand:SI 1 "const_int_operand" "n") (match_operand:SI 2 "const_int_operand" "n"))] "TARGET_HS" { operands[0] = gen_rtx_MEM (SImode, operands[0]); if (INTVAL (operands[1])) return "prefetchw%U0 %0"; else return "prefetch%U0 %0"; } [(set_attr "type" "load") (set_attr "length" "8")]) (define_insn "divsi3" [(set (match_operand:SI 0 "register_operand" "=r,r, r,r,r,r, r, r") (div:SI (match_operand:SI 1 "nonmemory_operand" "0,r,Cal,0,r,0, 0, r") (match_operand:SI 2 "nonmemory_operand" "r,r, r,L,L,I,Cal,Cal")))] "TARGET_DIVREM" "div%? %0, %1, %2" [(set_attr "length" "4,4,8,4,4,4,8,8") (set_attr "iscompact" "false") (set_attr "type" "div_rem") (set_attr "predicable" "yes,no,no,yes,no,no,yes,no") (set_attr "cond" "canuse,nocond,nocond,canuse,nocond,nocond,canuse,nocond") ]) (define_insn "udivsi3" [(set (match_operand:SI 0 "register_operand" "=r,r, r,r,r,r, r, r") (udiv:SI (match_operand:SI 1 "nonmemory_operand" "0,r,Cal,0,r,0, 0, r") (match_operand:SI 2 "nonmemory_operand" "r,r, r,L,L,I,Cal,Cal")))] "TARGET_DIVREM" "divu%? %0, %1, %2" [(set_attr "length" "4,4,8,4,4,4,8,8") (set_attr "iscompact" "false") (set_attr "type" "div_rem") (set_attr "predicable" "yes,no,no,yes,no,no,yes,no") (set_attr "cond" "canuse,nocond,nocond,canuse,nocond,nocond,canuse,nocond") ]) (define_insn "modsi3" [(set (match_operand:SI 0 "register_operand" "=r,r, r,r,r,r, r, r") (mod:SI (match_operand:SI 1 "nonmemory_operand" "0,r,Cal,0,r,0, 0, r") (match_operand:SI 2 "nonmemory_operand" "r,r, r,L,L,I,Cal,Cal")))] "TARGET_DIVREM" "rem%? %0, %1, %2" [(set_attr "length" "4,4,8,4,4,4,8,8") (set_attr "iscompact" "false") (set_attr "type" "div_rem") (set_attr "predicable" "yes,no,no,yes,no,no,yes,no") (set_attr "cond" "canuse,nocond,nocond,canuse,nocond,nocond,canuse,nocond") ]) (define_insn "umodsi3" [(set (match_operand:SI 0 "register_operand" "=r,r, r,r,r,r, r, r") (umod:SI (match_operand:SI 1 "nonmemory_operand" "0,r,Cal,0,r,0, 0, r") (match_operand:SI 2 "nonmemory_operand" "r,r, r,L,L,I,Cal,Cal")))] "TARGET_DIVREM" "remu%? %0, %1, %2" [(set_attr "length" "4,4,8,4,4,4,8,8") (set_attr "iscompact" "false") (set_attr "type" "div_rem") (set_attr "predicable" "yes,no,no,yes,no,no,yes,no") (set_attr "cond" "canuse,nocond,nocond,canuse,nocond,nocond,canuse,nocond") ]) ;; SETcc instructions (define_code_iterator arcCC_cond [eq ne gt lt ge le]) (define_insn "arcset

"
  [(set (match_operand:SI 0 "register_operand"                "=r,r,r,r,r,r,r")
	(arcCC_cond:SI (match_operand:SI 1 "register_operand"  "0,r,0,r,0,0,r")
		       (match_operand:SI 2 "nonmemory_operand" "r,r,L,L,I,n,n")))]
  "TARGET_V2 && TARGET_CODE_DENSITY"
  "set%? %0, %1, %2"
  [(set_attr "length" "4,4,4,4,4,8,8")
   (set_attr "iscompact" "false")
   (set_attr "type" "compare")
   (set_attr "predicable" "yes,no,yes,no,no,yes,no")
   (set_attr "cond" "canuse,nocond,canuse,nocond,nocond,canuse,nocond")
   ])

(define_insn "arcsetltu"
  [(set (match_operand:SI 0 "register_operand"         "=r,r,r,r,r,  r,  r")
	(ltu:SI (match_operand:SI 1 "register_operand"  "0,r,0,r,0,  0,  r")
		(match_operand:SI 2 "nonmemory_operand" "r,r,L,L,I,  n,  n")))]
  "TARGET_V2 && TARGET_CODE_DENSITY"
  "setlo%? %0, %1, %2"
  [(set_attr "length" "4,4,4,4,4,8,8")
   (set_attr "iscompact" "false")
   (set_attr "type" "compare")
   (set_attr "predicable" "yes,no,yes,no,no,yes,no")
   (set_attr "cond" "canuse,nocond,canuse,nocond,nocond,canuse,nocond")
   ])

(define_insn "arcsetgeu"
  [(set (match_operand:SI 0 "register_operand"         "=r,r,r,r,r,  r,  r")
	(geu:SI (match_operand:SI 1 "register_operand"  "0,r,0,r,0,  0,  r")
		(match_operand:SI 2 "nonmemory_operand" "r,r,L,L,I,  n,  n")))]
  "TARGET_V2 && TARGET_CODE_DENSITY"
  "seths%? %0, %1, %2"
  [(set_attr "length" "4,4,4,4,4,8,8")
   (set_attr "iscompact" "false")
   (set_attr "type" "compare")
   (set_attr "predicable" "yes,no,yes,no,no,yes,no")
   (set_attr "cond" "canuse,nocond,canuse,nocond,nocond,canuse,nocond")
   ])

;; Special cases of SETCC
(define_insn_and_split "arcsethi"
  [(set (match_operand:SI 0 "register_operand"         "=r,r,  r,r")
	(gtu:SI (match_operand:SI 1 "register_operand"  "r,r,  r,r")
		(match_operand:SI 2 "nonmemory_operand" "0,r,C62,n")))]
  "TARGET_V2 && TARGET_CODE_DENSITY"
  "setlo%? %0, %2, %1"
  "reload_completed
   && CONST_INT_P (operands[2])
   && satisfies_constraint_C62 (operands[2])"
  [(const_int 0)]
  "{
    /* sethi a,b,u6 => seths a,b,u6 + 1.  */
    operands[2] = GEN_INT (INTVAL (operands[2]) + 1);
    emit_insn (gen_arcsetgeu (operands[0], operands[1], operands[2]));
    DONE;
 }"
 [(set_attr "length" "4,4,4,8")
   (set_attr "iscompact" "false")
   (set_attr "type" "compare")
   (set_attr "predicable" "yes,no,no,no")
   (set_attr "cond" "canuse,nocond,nocond,nocond")]
)

(define_insn_and_split "arcsetls"
  [(set (match_operand:SI 0 "register_operand"         "=r,r,  r,r")
	(leu:SI (match_operand:SI 1 "register_operand"  "r,r,  r,r")
		(match_operand:SI 2 "nonmemory_operand" "0,r,C62,n")))]
  "TARGET_V2 && TARGET_CODE_DENSITY"
  "seths%? %0, %2, %1"
  "reload_completed
   && CONST_INT_P (operands[2])
   && satisfies_constraint_C62 (operands[2])"
  [(const_int 0)]
  "{
    /* setls a,b,u6 => setlo a,b,u6 + 1.  */
    operands[2] = GEN_INT (INTVAL (operands[2]) + 1);
    emit_insn (gen_arcsetltu (operands[0], operands[1], operands[2]));
    DONE;
 }"
 [(set_attr "length" "4,4,4,8")
   (set_attr "iscompact" "false")
   (set_attr "type" "compare")
   (set_attr "predicable" "yes,no,no,no")
   (set_attr "cond" "canuse,nocond,nocond,nocond")]
)

; Any mode that needs to be solved by secondary reload
(define_mode_iterator SRI [QI HI])

(define_expand "reload__load"
  [(parallel [(match_operand:SRI 0 "register_operand" "=r")
	      (match_operand:SRI 1 "memory_operand" "m")
	      (match_operand:SI 2 "register_operand" "=&r")])]
  ""
{
 arc_secondary_reload_conv (operands[0], operands[1], operands[2], false);
 DONE;
})

(define_expand "reload__store"
  [(parallel [(match_operand:SRI 0 "memory_operand" "=m")
	      (match_operand:SRI 1 "register_operand" "r")
	      (match_operand:SI 2 "register_operand" "=&r")])]
  ""
{
 arc_secondary_reload_conv (operands[1], operands[0], operands[2], true);
 DONE;
})

(define_insn "extzvsi"
  [(set (match_operand:SI 0 "register_operand"                  "=r  ,  r,r,r")
	(zero_extract:SI (match_operand:SI 1 "register_operand"  "0  ,  r,r,0")
			 (match_operand:SI 2 "const_int_operand" "C3p,C3p,n,n")
			 (match_operand:SI 3 "const_int_operand" "n  ,  n,n,n")))]
  "TARGET_HS && TARGET_BARREL_SHIFTER"
  {
   int assemble_op2 = (((INTVAL (operands[2]) - 1) & 0x1f) << 5) | (INTVAL (operands[3]) & 0x1f);
   operands[2] = GEN_INT (assemble_op2);
   return "xbfu%?\\t%0,%1,%2";
  }
  [(set_attr "type"       "shift")
   (set_attr "iscompact"  "false")
   (set_attr "length"     "4,4,8,8")
   (set_attr "predicable" "yes,no,no,yes")
   (set_attr "cond"       "canuse,nocond,nocond,canuse_limm")])

(define_insn "kflag"
  [(unspec_volatile [(match_operand:SI 0 "nonmemory_operand" "rL,I,Cal")]
		   VUNSPEC_ARC_KFLAG)]
  "TARGET_V2"
  "@
    kflag%? %0
    kflag %0
    kflag%? %0"
  [(set_attr "length" "4,4,8")
   (set_attr "type" "misc,misc,misc")
   (set_attr "predicable" "yes,no,yes")
   (set_attr "cond" "clob,clob,clob")])

(define_insn "clri"
  [(set (match_operand:SI  0 "dest_reg_operand" "=r")
	(unspec_volatile:SI [(match_operand:SI 1 "immediate_operand" "N")]
			    VUNSPEC_ARC_CLRI))]
  "TARGET_V2"
  "clri  %0"
  [(set_attr "length" "4")
   (set_attr "type" "misc")])

(define_insn "ffs"
  [(set (match_operand:SI  0 "dest_reg_operand" "=r,r")
	(unspec:SI [(match_operand:SI 1 "general_operand" "rL,Cal")]
			    UNSPEC_ARC_FFS))]
  "TARGET_NORM && TARGET_V2"
  "ffs\\t%0,%1"
  [(set_attr "length" "4,8")
   (set_attr "type" "two_cycle_core,two_cycle_core")])

(define_insn "ffs_f"
  [(set (match_operand:SI  0 "dest_reg_operand" "=r,r")
	(unspec:SI [(match_operand:SI 1 "general_operand" "rL,Cal")]
			    UNSPEC_ARC_FFS))
   (set (reg:CC_ZN CC_REG)
	(compare:CC_ZN (match_dup 1) (const_int 0)))]
  "TARGET_NORM && TARGET_V2"
  "ffs.f\\t%0,%1"
  [(set_attr "length" "4,8")
   (set_attr "type" "two_cycle_core,two_cycle_core")])

(define_expand "ffssi2"
  [(parallel [(set (match_dup 2)
		   (unspec:SI [(match_operand:SI 1 "register_operand" "")]
			      UNSPEC_ARC_FFS))
	      (set (reg:CC_ZN CC_REG)
		   (compare:CC_ZN (match_dup 1) (const_int 0)))])
   (set (match_dup 2) (plus:SI (match_dup 2) (const_int 1)))
   (set (match_operand:SI 0 "dest_reg_operand" "")
	(if_then_else:SI (eq:SI (reg:CC_ZN CC_REG) (const_int 0))
			 (const_int 0)
			 (match_dup 2)))]
  "TARGET_NORM && TARGET_V2"
  {
   operands[2] = gen_reg_rtx (SImode);
   })

(define_insn "fls"
  [(set (match_operand:SI  0 "register_operand" "=r,r")
	(unspec:SI [(match_operand:SI 1 "nonmemory_operand" "rL,Cal")]
			    UNSPEC_ARC_FLS))]
  "TARGET_NORM && TARGET_V2"
  "fls\\t%0,%1"
  [(set_attr "length" "4,8")
   (set_attr "type" "two_cycle_core,two_cycle_core")])

(define_insn "seti"
  [(unspec_volatile:SI [(match_operand:SI 0 "nonmemory_operand" "rL")]
		       VUNSPEC_ARC_SETI)]
  "TARGET_V2"
  "seti\\t%0"
  [(set_attr "length" "4")
   (set_attr "type" "misc")])

;; FPU/FPX expands

;;add
(define_expand "addsf3"
  [(set (match_operand:SF 0 "register_operand"           "")
	(plus:SF (match_operand:SF 1 "nonmemory_operand" "")
		 (match_operand:SF 2 "nonmemory_operand" "")))]
  "TARGET_FP_SP_BASE || TARGET_SPFP"
  "
  if (!register_operand (operands[1], SFmode)
      && !register_operand (operands[2], SFmode))
    operands[1] = force_reg (SFmode, operands[1]);
  ")

;;sub
(define_expand "subsf3"
  [(set (match_operand:SF 0 "register_operand"            "")
	(minus:SF (match_operand:SF 1 "nonmemory_operand" "")
		  (match_operand:SF 2 "nonmemory_operand" "")))]
  "TARGET_FP_SP_BASE || TARGET_SPFP"
  "
  if (!register_operand (operands[1], SFmode)
      && !register_operand (operands[2], SFmode))
    operands[1] = force_reg (SFmode, operands[1]);
  ")

;;mul
(define_expand "mulsf3"
  [(set (match_operand:SF 0 "register_operand"           "")
	(mult:SF (match_operand:SF 1 "nonmemory_operand" "")
		 (match_operand:SF 2 "nonmemory_operand" "")))]
  "TARGET_FP_SP_BASE || TARGET_SPFP"
  "
  if (!register_operand (operands[1], SFmode)
      && !register_operand (operands[2], SFmode))
    operands[1] = force_reg (SFmode, operands[1]);
  ")

;;add
(define_expand "adddf3"
  [(set (match_operand:DF 0 "double_register_operand"           "")
	(plus:DF (match_operand:DF 1 "double_register_operand"  "")
		 (match_operand:DF 2 "nonmemory_operand" "")))]
 "TARGET_FP_DP_BASE || TARGET_DPFP"
 "
  if (TARGET_DPFP)
   {
    if (GET_CODE (operands[2]) == CONST_DOUBLE)
     {
        rtx first, second, tmp;
        split_double (operands[2], &first, &second);
        tmp = force_reg (SImode, TARGET_BIG_ENDIAN ? first : second);
        emit_insn (gen_adddf3_insn (operands[0], operands[1],
                                    operands[2], tmp, const0_rtx));
     }
    else
     emit_insn (gen_adddf3_insn (operands[0], operands[1],
                                 operands[2], const1_rtx, const1_rtx));
   DONE;
  }
 else if (TARGET_FP_DP_BASE)
  {
   if (!even_register_operand (operands[2], DFmode))
      operands[2] = force_reg (DFmode, operands[2]);

   if (!even_register_operand (operands[1], DFmode))
      operands[1] = force_reg (DFmode, operands[1]);
  }
 else
  gcc_unreachable ();
 ")

;;sub
(define_expand "subdf3"
  [(set (match_operand:DF 0 "double_register_operand"            "")
	(minus:DF (match_operand:DF 1 "nonmemory_operand" "")
		  (match_operand:DF 2 "nonmemory_operand" "")))]
  "TARGET_FP_DP_BASE || TARGET_DPFP"
  "
   if (TARGET_DPFP)
    {
     if (TARGET_FP_DP_AX && (GET_CODE (operands[1]) == CONST_DOUBLE))
       operands[1] = force_reg (DFmode, operands[1]);
     if ((GET_CODE (operands[1]) == CONST_DOUBLE)
          || GET_CODE (operands[2]) == CONST_DOUBLE)
      {
        rtx first, second, tmp;
        int const_index = ((GET_CODE (operands[1]) == CONST_DOUBLE) ? 1 : 2);
        split_double (operands[const_index], &first, &second);
        tmp = force_reg (SImode, TARGET_BIG_ENDIAN ? first : second);
        emit_insn (gen_subdf3_insn (operands[0], operands[1],
                                    operands[2], tmp, const0_rtx));
      }
    else
     emit_insn (gen_subdf3_insn (operands[0], operands[1],
                                 operands[2], const1_rtx, const1_rtx));
    DONE;
   }
  else if (TARGET_FP_DP_BASE)
   {
    if (!even_register_operand (operands[2], DFmode))
       operands[2] = force_reg (DFmode, operands[2]);

    if (!even_register_operand (operands[1], DFmode))
       operands[1] = force_reg (DFmode, operands[1]);
   }
  else
   gcc_unreachable ();
  ")

;;mul
(define_expand "muldf3"
  [(set (match_operand:DF 0 "double_register_operand"           "")
	(mult:DF (match_operand:DF 1 "double_register_operand"  "")
		 (match_operand:DF 2 "nonmemory_operand" "")))]
  "TARGET_FP_DP_BASE || TARGET_DPFP"
  "
   if (TARGET_DPFP)
    {
     if (GET_CODE (operands[2]) == CONST_DOUBLE)
      {
        rtx first, second, tmp;
        split_double (operands[2], &first, &second);
        tmp = force_reg (SImode, TARGET_BIG_ENDIAN ? first : second);
        emit_insn (gen_muldf3_insn (operands[0], operands[1],
                                    operands[2], tmp, const0_rtx));
      }
     else
      emit_insn (gen_muldf3_insn (operands[0], operands[1],
                                  operands[2], const1_rtx, const1_rtx));
    DONE;
   }
  else if (TARGET_FP_DP_BASE)
   {
    if (!even_register_operand (operands[2], DFmode))
       operands[2] = force_reg (DFmode, operands[2]);

    if (!even_register_operand (operands[1], DFmode))
       operands[1] = force_reg (DFmode, operands[1]);
   }
  else
   gcc_unreachable ();
 ")

;;div
(define_expand "divsf3"
  [(set (match_operand:SF 0 "register_operand"        "")
	(div:SF (match_operand:SF 1 "nonmemory_operand" "")
		(match_operand:SF 2 "nonmemory_operand" "")))]
  "TARGET_FPX_QUARK || TARGET_FP_SP_SQRT"
  "
  if (TARGET_FPX_QUARK)
   {
     operands[1] = force_reg (SFmode, operands[1]);
     operands[2] = force_reg (SFmode, operands[2]);
   }
  else
   {
     if (!register_operand (operands[1], SFmode)
        && !register_operand (operands[2], SFmode))
       operands[1] = force_reg (SFmode, operands[1]);
   }
  ")

;; Square root
(define_expand "sqrtsf2"
  [(set (match_operand:SF 0 "register_operand"           "")
	(sqrt:SF (match_operand:SF 1 "nonmemory_operand" "")))]
  "TARGET_FPX_QUARK || TARGET_FP_SP_SQRT"
  "
  if (TARGET_FPX_QUARK)
   {
     operands[1] = force_reg (SFmode, operands[1]);
   }
")

;; SF->SI (using rounding towards zero)
(define_expand "fix_truncsfsi2"
  [(set (match_operand:SI 0 "register_operand"                "")
	(fix:SI (fix:SF (match_operand:SF 1 "register_operand" ""))))]
  "TARGET_FPX_QUARK || TARGET_FP_SP_CONV"
  "")

;; SI->SF
(define_expand "floatsisf2"
  [(set (match_operand:SF 0 "register_operand"            "")
	(float:SF (match_operand:SI 1 "register_operand" "")))]
  "TARGET_FPX_QUARK || TARGET_FP_SP_CONV"
  "")

(define_expand "extzv"
  [(set (match_operand:SI 0 "register_operand" "")
	(zero_extract:SI (match_operand:SI 1 "register_operand" "")
			 (match_operand:SI 2 "const_int_operand" "")
			 (match_operand:SI 3 "const_int_operand" "")))]
  "TARGET_NPS_BITOPS")

; We need a sanity check in the instuction predicate because combine
; will throw any old rubbish at us and see what sticks.
(define_insn "*extzv_i"
  [(set (match_operand:SI 0 "register_operand" "=Rrq")
	(zero_extract:SI (match_operand:SI 1 "register_operand" "Rrq")
			 (match_operand:SI 2 "const_int_operand" "n")
			 (match_operand:SI 3 "const_int_operand" "n")))]
  "TARGET_NPS_BITOPS && INTVAL (operands[2]) + INTVAL (operands[3]) <= 32"
  "movb.cl %0,%1,0,%3,%2"
  [(set_attr "type" "shift")
   (set_attr "length" "4")])

(define_expand "insv"
  [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "")
			 (match_operand:SI 1 "const_int_operand" "")
			 (match_operand:SI 2 "const_int_operand" ""))
	(match_operand:SI 3 "nonmemory_operand" ""))]
  "TARGET_NPS_BITOPS"
{
  int size = INTVAL (operands[1]);

  if (size != 1 && size != 2 && size != 4 && size != 8)
    operands[3] = force_reg (SImode, operands[3]);
})

(define_insn "*insv_i"
  [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+w,Rrq")
			 (match_operand:SI 1 "const_int_operand" "C18,n")
			 (match_operand:SI 2 "const_int_operand" "n,n"))
	(match_operand:SI 3 "nonmemory_operand" "P,Rrq"))]
  "TARGET_NPS_BITOPS
   && (register_operand (operands[3], SImode)
       || satisfies_constraint_C18 (operands[1]))"
  "@
   movbi %0,%0,%3,%2,%1
   movb %0,%0,%3,%2,0,%1"
  [(set_attr "type" "shift")
   (set_attr "length" "4")])

(define_insn "*movb"
  [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+Rrq")
			 (match_operand:SI 1 "const_int_operand" "n")
			 (match_operand:SI 2 "const_int_operand" "n"))
	(zero_extract:SI (match_operand:SI 3 "register_operand" "Rrq")
			 (match_dup 1)
			 (match_operand:SI 4 "const_int_operand" "n")))]
  "TARGET_NPS_BITOPS"
  "movb %0,%0,%3,%2,%4,%1"
  [(set_attr "type" "shift")
   (set_attr "length" "4")])

(define_insn "*movb_signed"
  [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+Rrq")
			 (match_operand:SI 1 "const_int_operand" "n")
			 (match_operand:SI 2 "const_int_operand" "n"))
	(sign_extract:SI (match_operand:SI 3 "register_operand" "Rrq")
			 (match_dup 1)
			 (match_operand:SI 4 "const_int_operand" "n")))]
  "TARGET_NPS_BITOPS"
  "movb %0,%0,%3,%2,%4,%1"
  [(set_attr "type" "shift")
   (set_attr "length" "4")])

(define_insn "*movb_high"
  [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+Rrq")
			 (match_operand:SI 1 "const_int_operand" "n")
			 (match_operand:SI 2 "const_int_operand" "n"))
	(lshiftrt:SI (match_operand:SI 3 "register_operand" "Rrq")
		     (match_operand:SI 4 "const_int_operand" "n")))]
  "TARGET_NPS_BITOPS
   && INTVAL (operands[4]) + INTVAL (operands[1]) <= 32"
  "movb %0,%0,%3,%2,%4,%1"
  [(set_attr "type" "shift")
   (set_attr "length" "4")])

; N.B.: when processing signed bitfields that fit in the top half of
; a word, gcc will use a narrow sign extending load, and in this case
; we will see INTVAL (operands[4]) + INTVAL (operands[1]) == 16 (or 8)
(define_insn "*movb_high_signed"
  [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+Rrq")
			 (match_operand:SI 1 "const_int_operand" "n")
			 (match_operand:SI 2 "const_int_operand" "n"))
	(ashiftrt:SI (match_operand:SI 3 "register_operand" "Rrq")
		     (match_operand:SI 4 "const_int_operand" "n")))]
  "TARGET_NPS_BITOPS
   && INTVAL (operands[4]) + INTVAL (operands[1]) <= 32"
  "movb %0,%0,%3,%2,%4,%1"
  [(set_attr "type" "shift")
   (set_attr "length" "4")])

(define_split
  [(set (match_operand:SI 0 "register_operand" "")
	(ior:SI (ashift:SI (match_operand:SI 1 "register_operand" "")
			   (match_operand:SI 2 "const_int_operand" ""))
		(subreg:SI (match_operand 3 "") 0)))]
  "TARGET_NPS_BITOPS
   && GET_MODE_BITSIZE (GET_MODE (operands[3])) <= INTVAL (operands[2])
   && !reg_overlap_mentioned_p (operands[0], operands[1])"
  [(set (match_dup 0) (zero_extend:SI (match_dup 3)))
   (set (zero_extract:SI (match_dup 0) (match_dup 4) (match_dup 2))
	(match_dup 1))]
  "operands[4] = GEN_INT (32 - INTVAL (operands[2]));")

(define_insn "*mrgb"
  [(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+Rrq")
			 (match_operand:SI 1 "const_int_operand" "n")
			 (match_operand:SI 2 "const_int_operand" "n"))
	(zero_extract:SI (match_dup 0) (match_dup 1)
			 (match_operand:SI 3 "const_int_operand" "n")))
   (set (zero_extract:SI (match_dup 0)
			 (match_operand:SI 4 "const_int_operand" "n")
			 (match_operand:SI 5 "const_int_operand" "n"))
	(zero_extract:SI (match_operand:SI 6 "register_operand" "Rrq")
			 (match_dup 4)
			 (match_operand:SI 7 "const_int_operand" "n")))]
  "TARGET_NPS_BITOPS"
{
  output_asm_insn ("mrgb %0,%0,%6,%2,%3,%1,%5,%7,%4", operands);
  /* The ;%? updates the known unalignment.  */
  return arc_short_long (insn, ";%?", "nop_s");
}
  [(set_attr "type" "shift")
   (set_attr "length" "6")
   (set_attr "iscompact" "true")])

;; combine fumbles combination of two movb patterns, and then the
;; combination is rejected by combinable_i3pat.
;; Thus, we can only use a peephole2 to combine two such insns.

(define_peephole2
  [(set (match_operand:SI 0 "register_operand" "")
	(match_operand:SI 1 "register_operand" ""))
   (set (zero_extract:SI (match_dup 0)
			 (match_operand:SI 2 "const_int_operand" "")
			 (match_operand:SI 3 "const_int_operand" ""))
	(zero_extract:SI (match_dup 1)
			 (match_dup 2)
			 (match_operand:SI 4 "const_int_operand" "")))
   (match_operand 9) ; unrelated insn scheduled here
   (set (zero_extract:SI (match_dup 0)
			 (match_operand:SI 5 "const_int_operand" "")
			 (match_operand:SI 6 "const_int_operand" ""))
	(zero_extract:SI (match_operand:SI 7 "register_operand" "")
			 (match_dup 5)
			 (match_operand:SI 8 "const_int_operand" "")))]
  "TARGET_NPS_BITOPS
   // Check that the second movb doesn't clobber an input of the extra insn.
   && !reg_overlap_mentioned_p (operands[0], operands[9])
   // And vice versa.
   && !reg_set_p (operands[0], operands[9])
   && !reg_set_p (operands[7], operands[9])"
  [(set (match_dup 0) (match_dup 1))
   (parallel [(set (zero_extract:SI (match_dup 0) (match_dup 1) (match_dup 2))
		   (zero_extract:SI (match_dup 3) (match_dup 1) (match_dup 4)))
	      (set (zero_extract:SI (match_dup 0) (match_dup 1) (match_dup 2))
		   (zero_extract:SI (match_dup 3) (match_dup 1) (match_dup 4)))])
   (match_dup 9)])

(define_peephole2
  [(set (match_operand:SI 0 "register_operand" "")
	(match_operand:SI 1 "register_operand" ""))
   (set (zero_extract:SI (match_dup 0)
			 (match_operand:SI 2 "const_int_operand" "")
			 (match_operand:SI 3 "const_int_operand" ""))
	(zero_extract:SI (match_dup 1)
			 (match_dup 2)
			 (match_operand:SI 4 "const_int_operand" "")))
   (set (match_dup 1) (match_operand 8))
   (set (zero_extract:SI (match_dup 0)
			 (match_operand:SI 5 "const_int_operand" "")
			 (match_operand:SI 6 "const_int_operand" ""))
	(zero_extract:SI (match_dup 1) (match_dup 5)
			 (match_operand:SI 7 "const_int_operand" "")))]
  "TARGET_NPS_BITOPS
   && !reg_overlap_mentioned_p (operands[0], operands[8])"
  [(set (match_dup 0) (match_dup 1))
   (set (match_dup 1) (match_dup 8))
   (parallel [(set (zero_extract:SI (match_dup 0) (match_dup 2) (match_dup 3))
		   (zero_extract:SI (match_dup 0) (match_dup 2) (match_dup 4)))
	      (set (zero_extract:SI (match_dup 0) (match_dup 5) (match_dup 6))
		   (zero_extract:SI (match_dup 1) (match_dup 5) (match_dup 7)))])
   (match_dup 1)])

(define_insn "*rotrsi3_cnt1"
  [(set (match_operand:SI 0 "dest_reg_operand"              "=r")
	(rotatert:SI (match_operand:SI 1 "nonmemory_operand" "rL")
		     (const_int 1)))]
  ""
  "ror\\t%0,%1"
  [(set_attr "type" "shift")
   (set_attr "predicable" "no")
   (set_attr "length" "4")])

(define_insn "*rotrsi3_cnt8"
  [(set (match_operand:SI 0 "register_operand"             "=r")
	(rotatert:SI (match_operand:SI 1 "nonmemory_operand" "rL")
		     (const_int 8)))]
  "TARGET_BARREL_SHIFTER && TARGET_V2"
  "ror8\\t%0,%1"
  [(set_attr "type" "shift")
   (set_attr "predicable" "no")
   (set_attr "length" "4")])

(define_insn "*ashlsi2_cnt1"
  [(set (match_operand:SI 0 "dest_reg_operand"           "=Rcqq,w")
	(ashift:SI (match_operand:SI 1 "register_operand" "Rcqq,c")
		   (const_int 1)))]
  ""
  "asl%? %0,%1%&"
  [(set_attr "type" "shift")
   (set_attr "iscompact" "maybe,false")
   (set_attr "length" "4")
   (set_attr "predicable" "no,no")])

(define_insn "*ashlsi2_cnt8"
  [(set (match_operand:SI 0 "register_operand"            "=r")
	(ashift:SI (match_operand:SI 1 "nonmemory_operand" "rL")
		   (const_int 8)))]
  "TARGET_BARREL_SHIFTER && TARGET_V2"
  "lsl8\\t%0,%1"
  [(set_attr "type" "shift")
   (set_attr "iscompact" "false")
   (set_attr "length" "4")
   (set_attr "predicable" "no")])

(define_insn "*ashlsi2_cnt16"
  [(set (match_operand:SI 0 "register_operand"            "=r")
	(ashift:SI (match_operand:SI 1 "nonmemory_operand" "rL")
		   (const_int 16)))]
  "TARGET_BARREL_SHIFTER && TARGET_V2"
  "lsl16\\t%0,%1"
  [(set_attr "type" "shift")
   (set_attr "iscompact" "false")
   (set_attr "length" "4")
   (set_attr "predicable" "no")])

(define_insn "*lshrsi3_cnt1"
  [(set (match_operand:SI 0 "dest_reg_operand"             "=Rcqq,w")
	(lshiftrt:SI (match_operand:SI 1 "register_operand" "Rcqq,c")
		     (const_int 1)))]
  ""
  "lsr%? %0,%1%&"
  [(set_attr "type" "shift")
   (set_attr "iscompact" "maybe,false")
   (set_attr "predicable" "no,no")])

(define_insn "*ashrsi3_cnt1"
  [(set (match_operand:SI 0 "dest_reg_operand"             "=Rcqq,w")
	(ashiftrt:SI (match_operand:SI 1 "register_operand" "Rcqq,c")
		     (const_int 1)))]
  ""
  "asr%? %0,%1%&"
  [(set_attr "type" "shift")
   (set_attr "iscompact" "maybe,false")
   (set_attr "predicable" "no,no")])

(define_peephole2
  [(set (match_operand:SI 0 "register_operand" "")
	(zero_extract:SI (match_dup 0)
			 (match_operand:SI 1 "const_int_operand" "")
			 (match_operand:SI 2 "const_int_operand" "")))
   (set (zero_extract:SI (match_operand:SI 3 "register_operand" "")
			 (match_dup 1)
			 (match_dup 2))
	(match_dup 0))]
  "TARGET_NPS_BITOPS
   && !reg_overlap_mentioned_p (operands[0], operands[3])"
  [(set (zero_extract:SI (match_dup 3) (match_dup 1) (match_dup 2))
	(zero_extract:SI (match_dup 0) (match_dup 1) (match_dup 2)))])

;; Dummy pattern used as a place holder for automatically saved
;; registers.
(define_insn "stack_irq_dwarf"
  [(unspec_volatile [(const_int 1)] VUNSPEC_ARC_STACK_IRQ)]
  ""
  ""
  [(set_attr "length" "0")])

;; MAC and DMPY instructions

; Use VMAC2H(U) instruction to emulate scalar 16bit mac.
(define_expand "maddhisi4"
  [(match_operand:SI 0 "register_operand" "")
   (match_operand:HI 1 "register_operand" "")
   (match_operand:HI 2 "register_operand" "")
   (match_operand:SI 3 "register_operand" "")]
  "TARGET_PLUS_MACD"
  "{
   rtx acc_reg = gen_rtx_REG (SImode, ACCL_REGNO);

   emit_move_insn (acc_reg, operands[3]);
   emit_insn (gen_machi (operands[0], operands[1], operands[2], acc_reg));
   DONE;
  }")

(define_insn "machi"
  [(set (match_operand:SI 0 "register_operand" "=Ral,r")
	(plus:SI
	 (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "%r,r"))
		  (sign_extend:SI (match_operand:HI 2 "register_operand" "r,r")))
	 (match_operand:SI 3 "accl_operand" "")))
   (clobber (reg:DI ARCV2_ACC))]
  "TARGET_PLUS_MACD"
  "dmach\\t%0,%1,%2"
  [(set_attr "length" "4")
   (set_attr "type" "multi")
   (set_attr "predicable" "no")
   (set_attr "cond" "nocond")])

; The same for the unsigned variant, but using VMAC2HU instruction.
(define_expand "umaddhisi4"
  [(match_operand:SI 0 "register_operand" "")
   (match_operand:HI 1 "register_operand" "")
   (match_operand:HI 2 "register_operand" "")
   (match_operand:SI 3 "register_operand" "")]
  "TARGET_PLUS_MACD"
  "{
   rtx acc_reg = gen_rtx_REG (SImode, ACCL_REGNO);

   emit_move_insn (acc_reg, operands[3]);
   emit_insn (gen_umachi (operands[0], operands[1], operands[2], acc_reg));
   DONE;
  }")

(define_insn "umachi"
  [(set (match_operand:SI 0 "register_operand" "=Ral,r")
	(plus:SI
	 (mult:SI (zero_extend:SI (match_operand:HI 1 "register_operand" "%r,r"))
		  (zero_extend:SI (match_operand:HI 2 "register_operand" "r,r")))
	 (match_operand:SI 3 "accl_operand" "")))
   (clobber (reg:DI ARCV2_ACC))]
  "TARGET_PLUS_MACD"
  "dmachu\\t%0,%1,%2"
  [(set_attr "length" "4")
   (set_attr "type" "multi")
   (set_attr "predicable" "no")
   (set_attr "cond" "nocond")])

(define_expand "maddsidi4"
  [(match_operand:DI 0 "register_operand" "")
   (match_operand:SI 1 "register_operand" "")
   (match_operand:SI 2 "extend_operand"   "")
   (match_operand:DI 3 "register_operand" "")]
  "TARGET_PLUS_DMPY"
  "{
   emit_insn (gen_maddsidi4_split (operands[0], operands[1], operands[2], operands[3]));
   DONE;
  }")

(define_insn_and_split "maddsidi4_split"
  [(set (match_operand:DI 0 "register_operand" "=r")
	(plus:DI
	 (mult:DI
	  (sign_extend:DI (match_operand:SI 1 "register_operand" "%r"))
	  (sign_extend:DI (match_operand:SI 2 "extend_operand" "ri")))
	 (match_operand:DI 3 "register_operand" "r")))
   (clobber (reg:DI ARCV2_ACC))]
  "TARGET_PLUS_DMPY"
  "#"
  "TARGET_PLUS_DMPY && reload_completed"
  [(const_int 0)]
  "{
   rtx acc_reg = gen_rtx_REG (DImode, ACC_REG_FIRST);
   emit_move_insn (acc_reg, operands[3]);
   if (TARGET_PLUS_MACD && even_register_operand (operands[0], DImode)
       && REGNO (operands[0]) != ACC_REG_FIRST)
      emit_insn (gen_macd (operands[0], operands[1], operands[2]));
   else
     {
      emit_insn (gen_mac (operands[1], operands[2]));
      if (REGNO (operands[0]) != ACC_REG_FIRST)
        emit_move_insn (operands[0], acc_reg);
     }
   DONE;
   }"
  [(set_attr "type" "multi")
   (set_attr "length" "36")])

(define_insn "macd"
  [(set (match_operand:DI 0 "even_register_operand"	       "=Rcr,r,r")
	(plus:DI
	 (mult:DI
	  (sign_extend:DI (match_operand:SI 1 "register_operand" "%0,r,r"))
	  (sign_extend:DI (match_operand:SI 2 "extend_operand"    "r,rI,Cal")))
	 (reg:DI ARCV2_ACC)))
   (set (reg:DI ARCV2_ACC)
	(plus:DI
	 (mult:DI (sign_extend:DI (match_dup 1))
		  (sign_extend:DI (match_dup 2)))
	 (reg:DI ARCV2_ACC)))]
 "TARGET_PLUS_MACD"
 "macd %0,%1,%2"
  [(set_attr "length" "4,4,8")
   (set_attr "type" "multi")
   (set_attr "predicable" "yes,no,no")
   (set_attr "cond" "canuse,nocond,nocond")])

(define_insn "mac"
  [(set (reg:DI ARCV2_ACC)
	(plus:DI
	 (mult:DI (sign_extend:DI (match_operand:SI 0 "register_operand" "%r,r"))
		  (sign_extend:DI (match_operand:SI 1 "extend_operand" "rI,i")))
	 (reg:DI ARCV2_ACC)))]
 "TARGET_PLUS_DMPY"
 "mac 0,%0,%1"
  [(set_attr "length" "4,8")
   (set_attr "type" "multi")
   (set_attr "predicable" "no")
   (set_attr "cond" "nocond")])

(define_peephole2
  [(set (reg:DI ARCV2_ACC)
	(plus:DI
	 (mult:DI (sign_extend:DI (match_operand:SI 0 "register_operand" ""))
		  (sign_extend:DI (match_operand:SI 1 "extend_operand" "")))
	 (reg:DI ARCV2_ACC)))
   (set (match_operand:SI 2 "register_operand" "")
	(match_operand:SI 3 "accl_operand" ""))]
 "TARGET_PLUS_DMPY"
 [(const_int 0)]
 {
  emit_insn (gen_mac_r (operands[2], operands[0], operands[1]));
  DONE;
 })

(define_insn "mac_r"
  [(set (match_operand:SI 0 "register_operand" "=r,r")
	(truncate:SI
	 (plus:DI
	  (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "%r,r"))
		   (sign_extend:DI (match_operand:SI 2 "extend_operand" "rI,i")))
	  (reg:DI ARCV2_ACC))))
   (clobber (reg:DI ARCV2_ACC))]
 "TARGET_PLUS_DMPY"
 "mac %0,%1,%2"
  [(set_attr "length" "4,8")
   (set_attr "type" "multi")
   (set_attr "predicable" "no")
   (set_attr "cond" "nocond")])

(define_expand "umaddsidi4"
  [(match_operand:DI 0 "register_operand" "")
   (match_operand:SI 1 "register_operand" "")
   (match_operand:SI 2 "extend_operand"   "")
   (match_operand:DI 3 "register_operand" "")]
  "TARGET_PLUS_DMPY"
  "{
   emit_insn (gen_umaddsidi4_split (operands[0], operands[1], operands[2], operands[3]));
   DONE;
  }")

(define_insn_and_split "umaddsidi4_split"
  [(set (match_operand:DI 0 "register_operand" "=r")
	(plus:DI
	 (mult:DI
	  (zero_extend:DI (match_operand:SI 1 "register_operand" "%r"))
	  (zero_extend:DI (match_operand:SI 2 "extend_operand" "ri")))
	 (match_operand:DI 3 "register_operand" "r")))
   (clobber (reg:DI ARCV2_ACC))]
  "TARGET_PLUS_DMPY"
  "#"
  "TARGET_PLUS_DMPY && reload_completed"
  [(const_int 0)]
  "{
   rtx acc_reg = gen_rtx_REG (DImode, ACC_REG_FIRST);
   emit_move_insn (acc_reg, operands[3]);
   if (TARGET_PLUS_MACD && even_register_operand (operands[0], DImode)
       && REGNO (operands[0]) != ACC_REG_FIRST)
      emit_insn (gen_macdu (operands[0], operands[1], operands[2]));
   else
     {
      emit_insn (gen_macu (operands[1], operands[2]));
      if (REGNO (operands[0]) != ACC_REG_FIRST)
        emit_move_insn (operands[0], acc_reg);
     }
   DONE;
   }"
  [(set_attr "type" "multi")
   (set_attr "length" "36")])

(define_insn "macdu"
  [(set (match_operand:DI 0 "even_register_operand"	       "=Rcr,r,r")
	(plus:DI
	 (mult:DI
	  (zero_extend:DI (match_operand:SI 1 "register_operand" "%0,r,r"))
	  (zero_extend:DI (match_operand:SI 2 "extend_operand"    "r,rI,i")))
	 (reg:DI ARCV2_ACC)))
   (set (reg:DI ARCV2_ACC)
	(plus:DI
	 (mult:DI (zero_extend:DI (match_dup 1))
		  (zero_extend:DI (match_dup 2)))
	 (reg:DI ARCV2_ACC)))]
 "TARGET_PLUS_MACD"
 "macdu %0,%1,%2"
  [(set_attr "length" "4,4,8")
   (set_attr "type" "multi")
   (set_attr "predicable" "yes,no,no")
   (set_attr "cond" "canuse,nocond,nocond")])

(define_insn "macu"
  [(set (reg:DI ARCV2_ACC)
	(plus:DI
	 (mult:DI (zero_extend:DI (match_operand:SI 0 "register_operand" "%r,r"))
		  (zero_extend:DI (match_operand:SI 1 "extend_operand" "rI,i")))
	 (reg:DI ARCV2_ACC)))]
 "TARGET_PLUS_DMPY"
 "macu 0,%0,%1"
  [(set_attr "length" "4,8")
   (set_attr "type" "multi")
   (set_attr "predicable" "no")
   (set_attr "cond" "nocond")])

(define_peephole2
  [(set (reg:DI ARCV2_ACC)
	(plus:DI
	 (mult:DI (zero_extend:DI (match_operand:SI 0 "register_operand" ""))
		  (zero_extend:DI (match_operand:SI 1 "extend_operand" "")))
	 (reg:DI ARCV2_ACC)))
   (set (match_operand:SI 2 "register_operand" "")
	(match_operand:SI 3 "accl_operand" ""))]
 "TARGET_PLUS_DMPY"
 [(const_int 0)]
 {
  emit_insn (gen_macu_r (operands[2], operands[0], operands[1]));
  DONE;
 })

(define_insn "macu_r"
  [(set (match_operand:SI 0 "register_operand" "=r,r")
	(truncate:SI
	 (plus:DI
	  (mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" "%r,r"))
		   (zero_extend:DI (match_operand:SI 2 "extend_operand" "rI,i")))
	  (reg:DI ARCV2_ACC))))
   (clobber (reg:DI ARCV2_ACC))]
 "TARGET_PLUS_DMPY"
 "macu %0,%1,%2"
  [(set_attr "length" "4,8")
   (set_attr "type" "multi")
   (set_attr "predicable" "no")
   (set_attr "cond" "nocond")])

(define_insn "mpyd_arcv2hs"
  [(set (match_operand:DI 0 "even_register_operand"	       "=r")
	(mult:DI (SEZ:DI (match_operand:SI 1 "register_operand" "r"))
		 (SEZ:DI (match_operand:SI 2 "register_operand" "r"))))
   (set (reg:DI ARCV2_ACC)
	(mult:DI
	  (SEZ:DI (match_dup 1))
	  (SEZ:DI (match_dup 2))))]
  "TARGET_PLUS_MACD"
  "mpyd%?\\t%0,%1,%2"
  [(set_attr "length" "4")
   (set_attr "iscompact" "false")
   (set_attr "type" "multi")
   (set_attr "predicable" "no")])

(define_insn "*pmpyd_arcv2hs"
  [(set (match_operand:DI 0 "even_register_operand"	     "=r")
	(mult:DI
	 (SEZ:DI (match_operand:SI 1 "even_register_operand" "%0"))
	 (SEZ:DI (match_operand:SI 2 "register_operand"      "r"))))
   (set (reg:DI ARCV2_ACC)
	(mult:DI
	  (SEZ:DI (match_dup 1))
	  (SEZ:DI (match_dup 2))))]
  "TARGET_PLUS_MACD"
  "mpyd%?\\t%0,%1,%2"
  [(set_attr "length" "4")
   (set_attr "iscompact" "false")
   (set_attr "type" "multi")
   (set_attr "predicable" "yes")])

(define_insn "mpyd_imm_arcv2hs"
  [(set (match_operand:DI 0 "even_register_operand"		"=r,r,  r")
	(mult:DI (SEZ:DI (match_operand:SI 1 "register_operand"  "r,0,  r"))
		 (match_operand 2	     "immediate_operand" "L,I,Cal")))
   (set (reg:DI ARCV2_ACC)
	(mult:DI (SEZ:DI (match_dup 1))
		 (match_dup 2)))]
  "TARGET_PLUS_MACD"
  "mpyd%?\\t%0,%1,%2"
  [(set_attr "length" "4,4,8")
   (set_attr "iscompact" "false")
   (set_attr "type" "multi")
   (set_attr "predicable" "no")])

(define_insn "*pmpyd_imm_arcv2hs"
  [(set (match_operand:DI 0 "even_register_operand"	    "=r,r")
	(mult:DI
	 (SEZ:DI (match_operand:SI 1 "even_register_operand" "0,0"))
	 (match_operand 2	     "immediate_operand"     "L,Cal")))
   (set (reg:DI ARCV2_ACC)
	(mult:DI (SEZ:DI (match_dup 1))
		 (match_dup 2)))]
  "TARGET_PLUS_MACD"
  "mpyd%?\\t%0,%1,%2"
  [(set_attr "length" "4,8")
   (set_attr "iscompact" "false")
   (set_attr "type" "multi")
   (set_attr "predicable" "yes")])

(define_insn "*add_shift"
  [(set (match_operand:SI 0 "register_operand" "=q,r,r")
	(plus:SI (ashift:SI (match_operand:SI 1 "register_operand" "q,r,r")
			    (match_operand:SI 2 "_1_2_3_operand" ""))
		 (match_operand:SI 3 "arc_nonmemory_operand"  "0,r,Csz")))]
  ""
  "add%2%?\\t%0,%3,%1"
  [(set_attr "length" "*,4,8")
   (set_attr "predicable" "yes,no,no")
   (set_attr "iscompact" "maybe,false,false")
   (set_attr "cond" "canuse,nocond,nocond")])

(define_insn "*add_shift2"
  [(set (match_operand:SI 0 "register_operand" "=q,r,r")
	(plus:SI (match_operand:SI 1 "nonmemory_operand"  "0,r,Cal")
		 (ashift:SI (match_operand:SI 2 "register_operand" "q,r,r")
			    (match_operand:SI 3 "_1_2_3_operand" ""))))]
  ""
  "add%3%?\\t%0,%1,%2"
  [(set_attr "length" "*,4,8")
   (set_attr "predicable" "yes,no,no")
   (set_attr "iscompact" "maybe,false,false")
   (set_attr "cond" "canuse,nocond,nocond")])

(define_insn "*sub_shift"
  [(set (match_operand:SI 0"register_operand" "=r,r,r")
	 (minus:SI (match_operand:SI 1 "nonmemory_operand" "0,r,Cal")
		   (ashift:SI (match_operand:SI 2 "register_operand" "r,r,r")
			      (match_operand:SI 3 "_1_2_3_operand" ""))))]
  ""
  "sub%3\\t%0,%1,%2"
  [(set_attr "length" "4,4,8")
   (set_attr "cond" "canuse,nocond,nocond")
   (set_attr "predicable" "yes,no,no")])

(define_insn "*sub_shift_cmp0_noout"
  [(set (match_operand 0 "cc_set_register" "")
	(compare:CC
	 (minus:SI (match_operand:SI 1 "register_operand" "r")
		   (ashift:SI (match_operand:SI 2 "register_operand" "r")
			      (match_operand:SI 3 "_1_2_3_operand" "")))
	 (const_int 0)))]
  ""
  "sub%3.f\\t0,%1,%2"
  [(set_attr "length" "4")])

(define_insn "*compare_si_ashiftsi"
  [(set (match_operand 0 "cc_set_register" "")
	(compare:CC (match_operand:SI 1 "register_operand" "r")
		    (ashift:SI (match_operand:SI 2 "register_operand" "r")
			       (match_operand:SI 3 "_1_2_3_operand" ""))))]
  ""
  "sub%3.f\\t0,%1,%2"
  [(set_attr "length" "4")])

;; Convert the sequence
;;  asl rd,rn,_1_2_3
;;  cmp ra,rd
;; into
;;  sub{123}.f 0,ra,rn
(define_peephole2
  [(set (match_operand:SI 0 "register_operand" "")
	(ashift:SI (match_operand:SI 1 "register_operand" "")
		   (match_operand:SI 2 "_1_2_3_operand" "")))
   (set (reg:CC CC_REG)
	(compare:CC (match_operand:SI 3 "register_operand" "")
		    (match_dup 0)))]
  "peep2_reg_dead_p (2, operands[0])"
  [(set (reg:CC CC_REG) (compare:CC (match_dup 3)
				    (ashift:SI (match_dup 1) (match_dup 2))))])

(define_peephole2 ; std
  [(set (match_operand:SI 2 "memory_operand" "")
	(match_operand:SI 0 "register_operand" ""))
   (set (match_operand:SI 3 "memory_operand" "")
	(match_operand:SI 1 "register_operand" ""))]
  "TARGET_LL64"
  [(const_int 0)]
{
  if (!gen_operands_ldd_std (operands, false, false))
    FAIL;
  operands[0] = gen_rtx_REG (DImode, REGNO (operands[0]));
  operands[2] = adjust_address (operands[2], DImode, 0);
  emit_insn (gen_rtx_SET (operands[2], operands[0]));
  DONE;
})

(define_peephole2 ; ldd
  [(set (match_operand:SI 0 "register_operand" "")
	(match_operand:SI 2 "memory_operand" ""))
   (set (match_operand:SI 1 "register_operand" "")
	(match_operand:SI 3 "memory_operand" ""))]
  "TARGET_LL64"
  [(const_int 0)]
{
  if (!gen_operands_ldd_std (operands, true, false))
    FAIL;
  operands[0] = gen_rtx_REG (DImode, REGNO (operands[0]));
  operands[2] = adjust_address (operands[2], DImode, 0);
  emit_insn (gen_rtx_SET (operands[0], operands[2]));
  DONE;
})

;; We require consecutive registers for LDD instruction.  Check if we
;; can reorder them and use an LDD.

(define_peephole2 ; swap the destination registers of two loads
		  ; before a commutative operation.
  [(set (match_operand:SI 0 "register_operand" "")
	(match_operand:SI 2 "memory_operand" ""))
   (set (match_operand:SI 1 "register_operand" "")
	(match_operand:SI 3 "memory_operand" ""))
   (set (match_operand:SI 4 "register_operand" "")
	(match_operator:SI 5 "commutative_operator"
			   [(match_operand 6 "register_operand" "")
			    (match_operand 7 "register_operand" "") ]))]
  "TARGET_LL64
   && (((rtx_equal_p (operands[0], operands[6]))
	 && (rtx_equal_p (operands[1], operands[7])))
	|| ((rtx_equal_p (operands[0], operands[7]))
	     && (rtx_equal_p (operands[1], operands[6]))))
   && (peep2_reg_dead_p (3, operands[0])
       || rtx_equal_p (operands[0], operands[4]))
   && (peep2_reg_dead_p (3, operands[1])
       || rtx_equal_p (operands[1], operands[4]))"
  [(set (match_dup 0) (match_dup 2))
   (set (match_dup 4) (match_op_dup 5 [(match_dup 6) (match_dup 7)]))]
  {
    if (!gen_operands_ldd_std (operands, true, true))
     {
	FAIL;
     }
    else
     {
	operands[0] = gen_rtx_REG (DImode, REGNO (operands[0]));
	operands[2] = adjust_address (operands[2], DImode, 0);
     }
   }
)

(define_insn "*push_multi_fp"
  [(match_parallel 0 "push_multi_operand"
		   [(set (reg:SI SP_REG)
			 (plus:SI (reg:SI SP_REG)
				  (match_operand 1 "immediate_operand" "")))
		    (set (mem:SI (plus:SI (reg:SI SP_REG)
					  (match_operand 2 "immediate_operand"
							 "")))
			 (reg:SI 13))])]
  "TARGET_CODE_DENSITY"
  {
   int len = XVECLEN (operands[0], 0);
   rtx tmp = XVECEXP (operands[0], 0, len - 1);
   if (MEM_P (XEXP (tmp, 0)))
     {
      operands[3] = XEXP (tmp, 1);
      return "enter_s\\t{r13-%3} ; sp=sp+(%1)";
     }
   else
     {
      tmp = XVECEXP (operands[0], 0, len - 3);
      operands[3] = XEXP (tmp, 1);
      return "enter_s\\t{r13-%3, fp} ; sp=sp+(%1)";
     }
  }
  [(set_attr "type" "call_no_delay_slot")
   (set_attr "length" "2")])

(define_insn "*push_multi_fp_blink"
  [(match_parallel 0 "push_multi_operand"
		   [(set (reg:SI SP_REG)
			 (plus:SI (reg:SI SP_REG)
				  (match_operand 1 "immediate_operand" "")))
		    (set (mem:SI (plus:SI (reg:SI SP_REG)
					  (match_operand 2 "immediate_operand"
							 "")))
			 (reg:SI RETURN_ADDR_REGNUM))])]
  "TARGET_CODE_DENSITY"
  {
   int len = XVECLEN (operands[0], 0);
   rtx tmp = XVECEXP (operands[0], 0, len - 1);
   if (MEM_P (XEXP (tmp, 0)))
     {
      operands[3] = XEXP (tmp, 1);
      return "enter_s\\t{r13-%3, blink} ; sp=sp+(%1)";
     }
   else
     {
      tmp = XVECEXP (operands[0], 0, len - 3);
      operands[3] = XEXP (tmp, 1);
      return "enter_s\\t{r13-%3, fp, blink} ; sp=sp+(%1)";
     }
  }
  [(set_attr "type" "call_no_delay_slot")
   (set_attr "length" "2")])

(define_insn "*pop_multi_fp"
  [(match_parallel 0 "pop_multi_operand"
		   [(set (reg:SI SP_REG)
			 (plus:SI (reg:SI SP_REG)
				  (match_operand 1 "immediate_operand" "")))
		    (set (reg:SI 13)
			 (mem:SI
			  (plus:SI
			   (reg:SI SP_REG)
			   (match_operand 2 "immediate_operand" ""))))])]
  "TARGET_CODE_DENSITY"
  {
   int len = XVECLEN (operands[0], 0);
   rtx tmp = XVECEXP (operands[0], 0, len - 1);
   if (XEXP (tmp, 0) != hard_frame_pointer_rtx)
     {
      operands[3] = XEXP (tmp, 0);
      gcc_assert (INTVAL (operands[1]) == INTVAL (operands[2]));
      return "leave_s\\t{r13-%3} ; sp=sp+%1";
     }
   else
     {
      tmp = XVECEXP (operands[0], 0, len - 2);
      operands[3] = XEXP (tmp, 0);
      return "leave_s\\t{r13-%3, fp} ; sp=sp+%1";
     }
  }
  [(set_attr "type" "call_no_delay_slot")
   (set_attr "length" "2")])

(define_insn "*pop_multi_fp_blink"
  [(match_parallel 0 "pop_multi_operand"
		   [(set (reg:SI SP_REG)
			 (plus:SI (reg:SI SP_REG)
				  (match_operand 1 "immediate_operand" "")))
		    (set (reg:SI RETURN_ADDR_REGNUM)
			 (mem:SI
			  (plus:SI
			   (reg:SI SP_REG)
			   (match_operand 2 "immediate_operand" ""))))])]
  "TARGET_CODE_DENSITY"
  {
   int len = XVECLEN (operands[0], 0);
   rtx tmp = XVECEXP (operands[0], 0, len - 1);
   if (XEXP (tmp, 0) != hard_frame_pointer_rtx)
     {
      operands[3] = XEXP (tmp, 0);
      gcc_assert (INTVAL (operands[1]) == INTVAL (operands[2]));
      return "leave_s\\t{r13-%3, blink} ; sp=sp+%1";
     }
   else
     {
      tmp = XVECEXP (operands[0], 0, len - 2);
      operands[3] = XEXP (tmp, 0);
      return "leave_s\\t{r13-%3, fp, blink} ; sp=sp+%1";
     }
  }
  [(set_attr "type" "call_no_delay_slot")
   (set_attr "length" "2")])

(define_insn "*pop_multi_fp_ret"
  [(match_parallel 0 "pop_multi_operand"
		   [(return)
		    (set (reg:SI SP_REG)
			 (plus:SI (reg:SI SP_REG)
				  (match_operand 1 "immediate_operand" "")))
		    (set (reg:SI 13)
			 (mem:SI
			  (plus:SI
			   (reg:SI SP_REG)
			   (match_operand 2 "immediate_operand" ""))))])]
  "TARGET_CODE_DENSITY"
  {
   int len = XVECLEN (operands[0], 0);
   rtx tmp = XVECEXP (operands[0], 0, len - 1);
   if (XEXP (tmp, 0) != hard_frame_pointer_rtx)
     {
      operands[3] = XEXP (tmp, 0);
      gcc_assert (INTVAL (operands[1]) == INTVAL (operands[2]));
      return "leave_s\\t{r13-%3, pcl} ; sp=sp+%1";
     }
   else
     {
      tmp = XVECEXP (operands[0], 0, len - 2);
      operands[3] = XEXP (tmp, 0);
      return "leave_s\\t{r13-%3, fp, pcl} ; sp=sp+%1";
     }
  }
  [(set_attr "type" "call_no_delay_slot")
   (set_attr "length" "2")])

(define_insn "*pop_multi_fp_blink_ret"
  [(match_parallel 0 "pop_multi_operand"
		   [(return)
		    (set (reg:SI SP_REG)
			 (plus:SI (reg:SI SP_REG)
				  (match_operand 1 "immediate_operand" "")))
		    (set (reg:SI RETURN_ADDR_REGNUM)
			 (mem:SI
			  (plus:SI
			   (reg:SI SP_REG)
			   (match_operand 2 "immediate_operand" ""))))])]
  "TARGET_CODE_DENSITY"
  {
   int len = XVECLEN (operands[0], 0);
   rtx tmp = XVECEXP (operands[0], 0, len - 1);
   if (XEXP (tmp, 0) != hard_frame_pointer_rtx)
     {
      operands[3] = XEXP (tmp, 0);
      gcc_assert (INTVAL (operands[1]) == INTVAL (operands[2]));
      return "leave_s\\t{r13-%3, blink, pcl} ; sp=sp+%1";
     }
   else
     {
      tmp = XVECEXP (operands[0], 0, len - 2);
      operands[3] = XEXP (tmp, 0);
      return "leave_s\\t{r13-%3, fp, blink, pcl} ; sp=sp+%1";
     }
  }
  [(set_attr "type" "call_no_delay_slot")
   (set_attr "length" "2")])

;; Patterns for exception handling
(define_insn_and_split "eh_return"
  [(unspec_volatile [(match_operand:SI 0 "register_operand" "r")]
		    VUNSPEC_ARC_EH_RETURN)]
  ""
  "#"
  "reload_completed"
  [(const_int 0)]
  "
  {
    arc_eh_return_address_location (operands[0]);
    DONE;
  }"
  [(set_attr "length" "8")]
  )

;; include the arc-FPX instructions
(include "fpx.md")

;; include the arc-FPU instructions
(include "fpu.md")

(include "simdext.md")

;; include atomic extensions
(include "atomic.md")