#!/bin/sh
# shellcheck disable=SC2039
# shellcheck disable=SC3043

# parse options
while [ -n "$1" ]; do
	case "$1" in
		--version | -v)
			export VERSION=1
			break
			;;
		--url)
			export URL="${2%/}"
			shift
			;; # strip trailing slash
		--interval)
			export INTERVAL="$2"
			shift
			;;
		--management_interval)
			export MANAGEMENT_INTERVAL="$2"
			shift
			;;
		--registration_interval)
			export REGISTRATION_INTERVAL="$2"
			shift
			;;
		--verify-ssl)
			export VERIFY_SSL="$2"
			shift
			;;
		--uuid)
			export UUID="$2"
			shift
			;;
		--key)
			export KEY="$2"
			shift
			;;
		--shared-secret)
			export SHARED_SECRET="$2"
			shift
			;;
		--consistent-key)
			export CONSISTENT_KEY="$2"
			shift
			;;
		--hardware-id-script)
			export HARDWARE_ID_SCRIPT="$2"
			shift
			;;
		--hardware-id-key)
			export HARDWARE_ID_KEY="$2"
			shift
			;;
		--bootup-delay)
			export BOOTUP_DELAY="$2"
			shift
			;;
		--merge-config)
			export MERGE_CONFIG="$2"
			shift
			;;
		--unmanaged)
			export UNMANAGED="$2"
			shift
			;;
		--test-config)
			export TEST_CONFIG="$2"
			shift
			;;
		--test-retries)
			export TEST_RETRIES="$2"
			shift
			;;
		--test-script)
			export TEST_SCRIPT="$2"
			shift
			;;
		--connect-timeout)
			export CONNECT_TIMEOUT="$2"
			shift
			;;
		--max-time)
			export MAX_TIME="$2"
			shift
			;;
		--capath)
			export CAPATH="$2"
			shift
			;;
		--cacert)
			export CACERT="$2"
			shift
			;;
		--mac-interface)
			export MAC_INTERFACE="$2"
			shift
			;;
		--management-interface)
			export MANAGEMENT_INTERFACE="$2"
			shift
			;;
		--default-hostname)
			export DEFAULT_HOSTNAME="$2"
			shift
			;;
		--pre-reload-hook)
			export PRE_RELOAD_HOOK="$2"
			shift
			;;
		--post-reload-hook)
			export POST_RELOAD_HOOK="$2"
			shift
			;;
		--post-reload-delay)
			export POST_RELOAD_DELAY="$2"
			shift
			;;
		--post-registration-hook)
			export POST_REGISTRATION_HOOK="$2"
			shift
			;;
		--checksum-max-retries)
			export CHECKSUM_MAX_RETRIES="$2"
			shift
			;;
		--checksum-retry-delay)
			export CHECKSUM_RETRY_DELAY="$2"
			shift
			;;
		-*)
			echo "Invalid option: $1"
			exit 1
			;;
		*) break ;;
	esac
	shift
done

if [ "$VERSION" -eq "1" ]; then
	VERSION=$(cat /etc/openwisp/VERSION)
	echo "openwisp-config $VERSION"
	exit 0
fi

if [ -z "$URL" ]; then
	logger -s "missing required --url option" \
		-t openwisp \
		-p daemon.err
	exit 2
fi

if { [ -z "$UUID" ] || [ -z "$KEY" ]; } && [ -z "$SHARED_SECRET" ]; then
	logger -s "you must either specify --uuid and --key, or --shared-secret" \
		-t openwisp \
		-p daemon.err
	exit 3
fi

INTERVAL=${INTERVAL:-120}
MANAGEMENT_INTERVAL=${MANAGEMENT_INTERVAL:-$((INTERVAL / 12))}
REGISTRATION_INTERVAL=${REGISTRATION_INTERVAL:-$((INTERVAL / 4))}
VERIFY_SSL=${VERIFY_SSL:-1}
MERGE_CONFIG=${MERGE_CONFIG:-1}
TEST_CONFIG=${TEST_CONFIG:-1}
TEST_RETRIES=${TEST_RETRIES:-3}
CONSISTENT_KEY=${CONSISTENT_KEY:-1}
HARDWARE_ID_KEY=${HARDWARE_ID_KEY:-1}
BOOTUP_DELAY=${BOOTUP_DELAY:-0}
CONNECT_TIMEOUT=${CONNECT_TIMEOUT:-15}
MAX_TIME=${MAX_TIME:-30}
MAC_INTERFACE=${MAC_INTERFACE:-eth0}
# LEDE was a popular fork of OpenWRT used in 2017
# it's kept here for backward compatibility
DEFAULT_HOSTNAME=${DEFAULT_HOSTNAME:-"LEDE"}
PRE_RELOAD_HOOK=${PRE_RELOAD_HOOK:-/etc/openwisp/pre-reload-hook}
POST_RELOAD_HOOK=${POST_RELOAD_HOOK:-/etc/openwisp/post-reload-hook}
POST_RELOAD_DELAY=${POST_RELOAD_DELAY:-5}
POST_REGISTRATION_HOOK=${POST_REGISTRATION_HOOK:-/etc/openwisp/post-registration-hook}
WORKING_DIR="/tmp/openwisp"
BASEURL="$URL/controller"
CONFIGURATION_ARCHIVE="$WORKING_DIR/configuration.tar.gz"
CONFIGURATION_CHECKSUM="$WORKING_DIR/checksum"
PERSISTENT_CHECKSUM="/etc/openwisp/checksum"
CONFIGURATION_BACKUP="$WORKING_DIR/backup.tar.gz"
BACKUP_FILE_LIST="$WORKING_DIR/backup_file_list.conf"
REGISTRATION_PARAMETERS="$WORKING_DIR/registration_parameters"
TEST_CHECKSUM="$WORKING_DIR/test_checksum"
UPDATE_INFO="$WORKING_DIR/update_info"
STATUS_REPORT="$WORKING_DIR/status_report"
APPLYING_CONF="$WORKING_DIR/applying_conf"
BOOTUP="$WORKING_DIR/bootup"
REGISTRATION_URL="$URL/controller/register/"
UNMANAGED_DIR="$WORKING_DIR/unmanaged"
FETCH_COMMAND="curl -s --connect-timeout $CONNECT_TIMEOUT --max-time $MAX_TIME"
CHECKSUM_MAX_RETRIES=${CHECKSUM_MAX_RETRIES:-5}
CHECKSUM_RETRY_DELAY=${CHECKSUM_RETRY_DELAY:-6}
mkdir -p $WORKING_DIR
mkdir -p $UNMANAGED_DIR

# restore last known checksum
if [ -f "$PERSISTENT_CHECKSUM" ]; then
	cp "$PERSISTENT_CHECKSUM" "$CONFIGURATION_CHECKSUM"
fi

if [ "$VERIFY_SSL" -eq "0" ]; then
	FETCH_COMMAND="$FETCH_COMMAND -k"
else
	if [ -n "$CAPATH" ]; then
		FETCH_COMMAND="$FETCH_COMMAND --capath $CAPATH"
	fi
	if [ -n "$CACERT" ]; then
		FETCH_COMMAND="$FETCH_COMMAND --cacert $CACERT"
	fi
fi

if [ ! -x "$HARDWARE_ID_SCRIPT" ]; then
	HARDWARE_ID_KEY=0
fi

if [ -n "$UNMANAGED" ]; then
	# replace commas with spaces
	UNMANAGED=$(echo "$UNMANAGED" | tr ',' ' ')
fi

# if management interface is not ready, the ip will be empty but other
# attempts at determining it will be done before the start-up is completed
if [ -n "$MANAGEMENT_INTERFACE" ]; then
	MANAGEMENT_IP=$(/usr/sbin/openwisp-get-address "$MANAGEMENT_INTERFACE")
fi

get_model() { cat /tmp/sysinfo/model; }
get_os() { ubus call system board | grep description | awk -F\" '{ print $4 }'; }
get_system() { ubus call system board | grep system | awk -F\" '{ print $4 }'; }

# ensures we are dealing with the right web server
check_header() {
	local is_controller
	is_controller=$(grep -ic "X-Openwisp-Controller: true" "$1")
	if [ "$is_controller" -lt 1 ]; then
		logger -s "Invalid url: missing X-Openwisp-Controller header" \
			-t openwisp \
			-p daemon.err
		exit 4
	fi
}

is_http_status() {
	head -n 1 "$1" | grep "$2" >/dev/null
}

# performs automatic registration
register() {
	logger "Registering device..." \
		-t openwisp \
		-p daemon.info

	local hostname raw macaddr name backend tags model os system hardware_id \
		params keybase consistent_key exit_code message new prefix
	hostname=$(uci get system.@system[0].hostname)
	# use macaddr of interface specified in $MAC_INTERFACE
	raw=$(ifconfig "$MAC_INTERFACE" 2>/dev/null 2>&1)
	# if previous command fails, fallback to first non-loopback interface
	if [ -z "$raw" ]; then raw=$(ifconfig); fi
	macaddr=$(echo "$raw " | grep -E -v "^(lo|tap[0-9]+)" | awk '/HWaddr/ { print $5 }' | head -n 1)
	# convert hostname to lowercase for case insensitive check
	name=$(echo "$hostname" | awk '{print tolower($0)}')
	# use mac address if hostname is the default one or empty
	if [ "$name" = "openwrt" ] || [ "$hostname" = "$DEFAULT_HOSTNAME" ] || [ -z "$name" ]; then
		hostname="$macaddr"
	fi
	backend="netjsonconfig.OpenWrt"
	tags=$(uci get openwisp.http.tags 2>/dev/null 2>&1)
	# get device model, OS identifier and SOC info
	model=$(get_model)
	os=$(get_os)
	system=$(get_system)
	# get hardware id if script is given
	if [ -x "$HARDWARE_ID_SCRIPT" ]; then
		hardware_id=$("$HARDWARE_ID_SCRIPT")
	else
		hardware_id=""
	fi
	# prepare POST params
	params="backend=$backend"
	if [ "$CONSISTENT_KEY" -eq "1" ]; then
		if [ -x "$HARDWARE_ID_SCRIPT" ] && [ "$HARDWARE_ID_KEY" = "1" ]; then
			# use hardware id as base for the key
			keybase="$hardware_id"
		else
			# use macaddress as base for the key
			keybase="$macaddr"
		fi
		# shellcheck disable=SC3037
		consistent_key=$(echo -n "$keybase+$SHARED_SECRET" | md5sum | awk '{print $1}')
		params="$params&key=$consistent_key"
	fi
	# add management ip in params if present
	if [ -n "$MANAGEMENT_IP" ]; then
		params="$params&management_ip=$MANAGEMENT_IP"
	fi
	$FETCH_COMMAND --data "$params" \
		--data-urlencode secret="$SHARED_SECRET" \
		--data-urlencode name="$hostname" \
		--data-urlencode hardware_id="$hardware_id" \
		--data-urlencode mac_address="$macaddr" \
		--data-urlencode tags="$tags" \
		--data-urlencode model="$model" \
		--data-urlencode os="$os" \
		--data-urlencode system="$system" \
		-i "$REGISTRATION_URL" >"$REGISTRATION_PARAMETERS"
	exit_code=$?
	# report eventual failures and return
	if [ "$exit_code" -ne "0" ]; then
		logger -s "Failed to connect to controller during registration: curl exit code $exit_code" \
			-t openwisp \
			-p daemon.err
		return 1
	fi
	# exit if response does not seem to come from openwisp controller
	check_header $REGISTRATION_PARAMETERS
	if ! is_http_status $REGISTRATION_PARAMETERS 201; then
		# get body of failure response, seperated from header by a blank line (CRLF-ended)
		message=$(awk 'BEGIN{RS="\r\n\r\n"}{if(NR>1)print $0}' $REGISTRATION_PARAMETERS)
		logger -s "Registration failed! $message" \
			-t openwisp \
			-p daemon.err
		# if controller returns 403, stop retrying because it's useless
		if is_http_status $REGISTRATION_PARAMETERS 403; then
			exit 5
		# in all other cases, keep re-trying because the problem can be fixed
		# on the server (eg: self creation disabled and device needs to be created
		# or temporary error condition on the server)
		else
			return 2
		fi
	fi
	# set configuration options and reload
	# shellcheck disable=SC2002
	{
		UUID=$(cat "$REGISTRATION_PARAMETERS" | grep uuid | awk '/uuid: / { print $2 }')
		KEY=$(cat "$REGISTRATION_PARAMETERS" | grep key | awk '/key: / { print $2 }')
		name=$(cat "$REGISTRATION_PARAMETERS" | grep hostname | awk '/hostname: / { print $2 }')
		new=$(cat "$REGISTRATION_PARAMETERS" | grep 'is-new' | awk '/is-new: / { print $2 }')
	}
	export UUID KEY
	# keep backward compatibility with older controller (TODO: remove this in 0.5)
	[ -z "$name" ] && name="$hostname"
	[ -z "$new" ] && new="1"
	# persist uuid and key in conf
	uci set openwisp.http.uuid="$UUID"
	uci set openwisp.http.key="$KEY"
	# remove shared secret to avoid accidental re-registration
	uci set openwisp.http.shared_secret=""
	uci commit openwisp
	rm $REGISTRATION_PARAMETERS
	# log operation
	prefix=$([ "$new" -eq "1" ] && echo "New" || echo "Existing")
	logger "$prefix device registered successfully as $name, id: $UUID" \
		-t openwisp \
		-p daemon.info
	# indicates this function has been called
	# (used by `discover_management_ip`)
	export REGISTER_CALLED=1
	# call post registration hook
	post_registration_hook
}

# gets checksum from controller
# - 404 trigger retries and if the 404 persists the agent
#   quits assuming the device is deleted from OpenWISP Controller
# - any other error is logged but the agent continues execution
#   and will eventually try again at the next cycle
get_checksum() {
	local exit_code status

	for attempt_no in $(seq 1 "$CHECKSUM_MAX_RETRIES"); do
		$FETCH_COMMAND -i "$CHECKSUM_URL" >"$1"
		exit_code=$?

		if [ "$exit_code" -ne "0" ]; then
			logger -s "Failed to connect to controller while getting checksum: curl exit code $exit_code" \
				-t openwisp \
				-p daemon.err
			return 2
		fi

		if is_http_status "$1" 404; then
			logger -s "Failed to retrieve checksum: 404 Not Found" \
				-t openwisp \
				-p daemon.warning

			if [ "$attempt_no" -eq "$CHECKSUM_MAX_RETRIES" ]; then
				logger -s "Giving up and shutting down: the device may have been deleted from OpenWISP Controller" \
					-t openwisp \
					-p daemon.err
				exit 0
			fi

			sleep "$CHECKSUM_RETRY_DELAY"
			# try again
			continue
		else
			break
		fi
	done

	if ! is_http_status "$1" 200; then
		status=$(head -n 1 "$1")
		logger -s "Failed to retrieve checksum: $status" \
			-t openwisp \
			-p daemon.err
		return 3
	fi

	check_header "$1"
}

# returns 1 if configuration in controller has changed
configuration_changed() {
	local CURRENT_CHECKSUM exit_code REMOTE_CHECKSUM
	CURRENT_CHECKSUM=$(tail -n 1 $CONFIGURATION_CHECKSUM 2>/dev/null)
	get_checksum $CONFIGURATION_CHECKSUM
	exit_code=$?

	if [ "$exit_code" -ne "0" ]; then
		# restore last known checksum if get_checksum failed
		if [ -f "$PERSISTENT_CHECKSUM" ]; then
			cp "$PERSISTENT_CHECKSUM" "$CONFIGURATION_CHECKSUM"
		fi
		return $exit_code
	fi

	REMOTE_CHECKSUM=$(tail -n 1 $CONFIGURATION_CHECKSUM 2>/dev/null)

	if [ "$CURRENT_CHECKSUM" != "$REMOTE_CHECKSUM" ]; then
		logger "Local configuration outdated" \
			-t openwisp \
			-p daemon.info
		return 1
	fi

	return 0
}

# called in `apply_configuration` before services are reloaded
pre_reload_hook() {
	local exit_code
	if [ -x "$PRE_RELOAD_HOOK" ]; then
		$PRE_RELOAD_HOOK
		exit_code=$?
		logger "Called pre-reload-hook: $PRE_RELOAD_HOOK - exit code: $exit_code" \
			-t openwisp \
			-p daemon.info
		return $exit_code
	fi
}

# called in `apply_configuration` after services are reloaded
post_reload_hook() {
	if [ -x "$POST_RELOAD_HOOK" ]; then
		$POST_RELOAD_HOOK
		local exit_code=$?
		logger "Called post-reload-hook: $POST_RELOAD_HOOK - exit code: $exit_code" \
			-t openwisp \
			-p daemon.info
		return $exit_code
	fi
}

# called after registration is completed
post_registration_hook() {
	if [ -x "$POST_REGISTRATION_HOOK" ]; then
		$POST_REGISTRATION_HOOK
		local exit_code=$?
		logger "Called post-registration-hook: $POST_REGISTRATION_HOOK - exit code: $exit_code" \
			-t openwisp \
			-p daemon.info
		return $exit_code
	fi
}

# applies a specified configuration archive
apply_configuration() {
	# store unmanaged config (if enabled)
	call_store_unmanaged
	# update local configuration
	/usr/sbin/openwisp-update-config --conf="$1" --merge="$MERGE_CONFIG"
	local exit_code=$?
	# restore unmanaged configurations
	call_restore_unmanaged
	# if configuration could not be applied
	# (because of a syntax error) restore a backup
	if [ "$exit_code" -ne "0" ]; then
		logger -s "Could not apply configuration, openwisp-update-config exit code was $exit_code" \
			-t openwisp \
			-p daemon.crit
		restore_backup
		return 1
	fi
	# call pre-reload-hook
	pre_reload_hook
	# reload changes and wait $POST_RELOAD_DELAY
	/usr/sbin/openwisp-reload-config
	sleep "$POST_RELOAD_DELAY"
	# call post-reload-hook
	post_reload_hook
}

# send up to date device info to the controller
update_info() {
	# get device model, OS identifier and SOC info
	local model os system exit_code status
	model=$(get_model)
	os=$(get_os)
	system=$(get_system)
	# retry several times
	for i in $(seq 1 10); do
		$FETCH_COMMAND -i \
			--data "key=$KEY" \
			--data-urlencode model="$model" \
			--data-urlencode os="$os" \
			--data-urlencode system="$system" \
			"$UPDATE_INFO_URL" >$UPDATE_INFO
		exit_code=$?
		if [ "$exit_code" -eq "0" ]; then
			logger "Device info updated on the controller" \
				-t openwisp \
				-p daemon.info
			break
		else
			sleep 2
		fi
	done

	if [ "$exit_code" -ne "0" ]; then
		logger -s "Failed to connect to controller during update-info: curl exit code $exit_code" \
			-t openwisp \
			-p daemon.err
		return 2
	fi

	if ! is_http_status $UPDATE_INFO 200; then
		local status
		status=$(head -n 1 $UPDATE_INFO)
		logger -s "Failed to update device info: $status" \
			-t openwisp \
			-p daemon.err
		return 3
	fi
	check_header $UPDATE_INFO
	rm $UPDATE_INFO
}

# report configuration status: "applied" or "error"
report_status() {
	local exit_code status
	# retry several times
	for i in $(seq 1 30); do
		$FETCH_COMMAND -i --data "key=$KEY&status=$1" "$REPORT_URL" >$STATUS_REPORT
		exit_code=$?
		if [ "$exit_code" -eq "0" ]; then
			break
		else
			sleep 2
		fi
	done

	if [ "$exit_code" -ne "0" ]; then
		logger -s "Failed to connect to controller during report-status: curl exit code $exit_code" \
			-t openwisp \
			-p daemon.err
		return 2
	fi

	if ! is_http_status $STATUS_REPORT 200; then
		local status
		status=$(head -n 1 $STATUS_REPORT)
		logger -s "Failed to report status: $status" \
			-t openwisp \
			-p daemon.err
		return 3
	fi
	check_header $STATUS_REPORT
	rm $STATUS_REPORT
}

# performs configuration test and reports result
test_configuration() {
	if ! apply_configuration "$1"; then
		return 1
	fi

	logger "Testing configuration..." \
		-t openwisp \
		-p daemon.info

	if [ -z "$TEST_SCRIPT" ]; then
		perform_default_test
		local test_result=$?
	else
		$TEST_SCRIPT
		local test_result=$?
	fi

	if [ $test_result -gt 0 ]; then
		logger -s "Configuration test failed! Restoring previous backup" \
			-t openwisp \
			-p daemon.err
		restore_backup
		local ret=1
	else
		logger "Configuration test succeeded" \
			-t openwisp \
			-p daemon.info
		local ret=0
	fi

	rm $CONFIGURATION_BACKUP
	return $ret
}

perform_default_test() {
	# the default test is performed several times, as indicated by $TEST_RETRIES
	for i in $(seq 1 "$TEST_RETRIES"); do
		$FETCH_COMMAND -i "$CHECKSUM_URL" >$TEST_CHECKSUM
		local result=$?
		if [ $result -ne 0 ]; then
			logger "Configuration test failed (attempt $i)" \
				-t openwisp \
				-p daemon.warning
			sleep 5
		else
			break
		fi
	done
	rm $TEST_CHECKSUM
	return $result
}

# stores unmanaged configuration sections that will be merged
# with the configuration downloaded from the controller
call_store_unmanaged() {
	if [ -z "$UNMANAGED" ]; then
		return 0
	fi
	/usr/sbin/openwisp-store-unmanaged -o="$UNMANAGED"
}

# restores unmanaged configuration sections that will be merged
# with the configuration downloaded from the controller
call_restore_unmanaged() {
	if [ -z "$UNMANAGED" ]; then
		return 0
	fi
	/usr/sbin/openwisp-restore-unmanaged
}

# 1. ensures there are no anonymous UCI blocks
# 2. re-generate the md5 checksums
# 3. removes default wifi-ifaces directive (LEDE or OpenWrt SSID)
fix_uci_config() {
	output=$(/usr/sbin/openwisp-uci-autoname)
	if [ -n "$output" ]; then
		logger "The following uci configs have been renamed: $output" \
			-t openwisp \
			-p daemon.info
	fi

	# Re-generate the md5 checksums to avoid reloading services which had
	# anonymous UCI sections which were removed.
	rm -rf /var/run/config.check
	mkdir -p /var/run/config.check
	for config in /etc/config/*; do
		file=${config##*/}
		uci show "${file##*/}" >/var/run/config.check/"$file"
	done
	md5sum /var/run/config.check/* >/var/run/config.md5
	rm -rf /var/run/config.check

	/usr/sbin/openwisp-remove-default-wifi
}

# downloads configuration from controller
# performs test (if testing enabled)
# and applies it
update_configuration() {
	logger "Downloading configuration from controller..." \
		-t openwisp \
		-p daemon.info

	# download configuration
	$FETCH_COMMAND --fail "$CONFIGURATION_URL" -o $CONFIGURATION_ARCHIVE
	local exit_code=$?

	if [ "$exit_code" -ne "0" ]; then
		logger -s "Failed to connect to controller while downloading new config: curl exit code $exit_code" \
			-t openwisp \
			-p daemon.err
		# remove the checksum to ensure update is tried again at the next run
		rm -f $CONFIGURATION_CHECKSUM
		return 3
	fi

	local LOCAL_CHECKSUM
	local REMOTE_CHECKSUM
	LOCAL_CHECKSUM=$(md5sum $CONFIGURATION_ARCHIVE | cut -d ' ' -f 1)
	REMOTE_CHECKSUM=$(tail -n 1 $CONFIGURATION_CHECKSUM 2>/dev/null)

	if [ "$LOCAL_CHECKSUM" != "$REMOTE_CHECKSUM" ]; then
		logger -s "Failed to download configuration: checksum mismatch" \
			-t openwisp \
			-p daemon.err
		# remove the checksum to ensure update is tried again at the next run
		rm -f $CONFIGURATION_CHECKSUM
		return 4
	fi

	logger "Configuration downloaded, now applying it..." \
		-t openwisp \
		-p daemon.info

	# makes fixes to the default uci config so
	# it's more suited for remote control
	fix_uci_config

	# control file to avoid reloading the agent while
	# configuration is still being applied
	touch $APPLYING_CONF

	# performs backup of files that are going to be changed
	backup_configuration

	# testing enabled
	if [ "$TEST_CONFIG" -eq "1" ]; then
		test_configuration $CONFIGURATION_ARCHIVE
		result=$?
	# testing diabled
	else
		apply_configuration $CONFIGURATION_ARCHIVE
		result=$?
	fi

	if [ "$result" -eq "0" ]; then
		logger "Configuration applied successfully" \
			-t openwisp \
			-p daemon.info
		# store the new checksum as last known checksum
		cp "$CONFIGURATION_CHECKSUM" "$PERSISTENT_CHECKSUM"
		report_status "applied"
	else
		report_status "error"
	fi

	rm $APPLYING_CONF
}

backup_configuration() {
	# save list of files that are going to be changed by openwisp
	# so that if the changes sent by openwisp cause problems,
	# the previous version can be rolled back
	tar -ztf $CONFIGURATION_ARCHIVE | sed 's/^/\//' >$BACKUP_FILE_LIST
	# backup only those files
	tar -zcf $CONFIGURATION_BACKUP -T $BACKUP_FILE_LIST
	rm $BACKUP_FILE_LIST
}

restore_backup() {
	# restores backup created in backup_configuration() function
	sysupgrade -r $CONFIGURATION_BACKUP
	pre_reload_hook
	/usr/sbin/openwisp-reload-config
	sleep "$POST_RELOAD_DELAY"
	post_reload_hook
	logger -s "The most recent configuration backup was restored" \
		-t openwisp \
		-p daemon.info
}

discover_management_ip() {
	# return if not using management interface
	if [ -z "$MANAGEMENT_INTERFACE" ]; then
		return
	fi
	# if being called just after `register` was called
	if [ -n "$REGISTER_CALLED" ]; then
		# don't do anything now, but unset the
		# control variable so the logic will be
		# executed at the next iteration
		unset REGISTER_CALLED
		return
	fi
	MANAGEMENT_IP=$(/usr/sbin/openwisp-get-address "$MANAGEMENT_INTERFACE")
	# if management interface is defined but its ip could not be determined
	# and the shared secret is not present anymore
	# (which means the device has been already registered)
	# try waiting for the management interface to be ready
	if [ -z "$MANAGEMENT_IP" ] && [ -z "$SHARED_SECRET" ]; then
		MAX_ATTEMPTS=3
		for attempt in $(seq $MAX_ATTEMPTS); do
			MANAGEMENT_IP=$(/usr/sbin/openwisp-get-address "$MANAGEMENT_INTERFACE")

			if [ -z "$MANAGEMENT_IP" ]; then
				logger -s "management interface not ready (attempt $attempt of $MAX_ATTEMPTS)" \
					-t openwisp \
					-p daemon.notice
				if [ "$attempt" -lt "$MAX_ATTEMPTS" ]; then
					sleep "$MANAGEMENT_INTERVAL"
				else
					logger -s "could not determine ip address of management interface, giving up..." \
						-t openwisp \
						-p daemon.warning
				fi
			else
				break
			fi
		done
	fi
	# add management ip to URLs if present
	if [ -n "$MANAGEMENT_IP" ]; then
		export CONFIGURATION_URL="$BASE_CONFIGURATION_URL&management_ip=$MANAGEMENT_IP"
		export CHECKSUM_URL="$BASE_CHECKSUM_URL&management_ip=$MANAGEMENT_IP"
	fi
}

handle_sigusr1() {
	logger -s "Received SIGUSR1: interrupting interval sleep..." \
		-t openwisp \
		-p daemon.info
}

# ensure both UUID and KEY are defined
# otherwise perform registration
if [ -z "$UUID" ] || [ -z "$KEY" ]; then
	# do not crash if controller can't be reached
	# but retry every $REGISTRATION_INTERVAL seconds
	# (device might be unplugged, unconfigured or connecting)
	until register; do
		sleep "$REGISTRATION_INTERVAL"
	done
	touch "$BOOTUP"
fi

# these variables are evaluated here because "register()" might set UUID and KEY
BASE_CONFIGURATION_URL="$BASEURL/download-config/$UUID/?key=$KEY"
BASE_CHECKSUM_URL="$BASEURL/checksum/$UUID/?key=$KEY"
CONFIGURATION_URL=$BASE_CONFIGURATION_URL
CHECKSUM_URL=$BASE_CHECKSUM_URL
UPDATE_INFO_URL="$BASEURL/update-info/$UUID/"
REPORT_URL="$BASEURL/report-status/$UUID/"

if [ ! -f "$BOOTUP" ]; then
	# actions to do only after agent start, not after registration or agent restart
	if [ "$BOOTUP_DELAY" -ne "0" ]; then
		# get a random number between zero and $BOOTUP_DELAY
		DELAY=$(/usr/sbin/openwisp-get-random-number 0 "$BOOTUP_DELAY")
		logger "Delaying startup for $DELAY seconds..." \
			-t openwisp \
			-p daemon.info
		sleep "$DELAY"
	fi
	# send up to date device info
	update_info
	touch "$BOOTUP"
fi

while true; do
	# check management interface at each iteration
	# (because the address may change due to
	# configuration updates or manual reconfigurations)
	discover_management_ip

	configuration_changed

	if [ "$?" -eq "1" ]; then
		update_configuration
	fi

	# handle SIGUSR1 to interrupt sleep
	trap handle_sigusr1 USR1
	sleep "$INTERVAL" &
	wait $!
	# ignore SIGUSR1 signals again
	trap "" USR1
done