# SPDX-License-Identifier: GPL-2.0-only # # Broadcom device configuration # config NET_VENDOR_BROADCOM bool "Broadcom devices" default y depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ SIBYTE_SB1xxx_SOC help If you have a network (Ethernet) chipset belonging to this class, say Y. Note that the answer to this question does not directly affect the kernel: saying N will just cause the configurator to skip all the questions regarding Broadcom chipsets. If you say Y, you will be asked for your specific chipset/driver in the following questions. if NET_VENDOR_BROADCOM config B44 tristate "Broadcom 440x/47xx ethernet support" depends on SSB_POSSIBLE && HAS_DMA select SSB select MII select PHYLIB help If you have a network (Ethernet) controller of this type, say Y or M here. To compile this driver as a module, choose M here. The module will be called b44. # Auto-select SSB PCI-HOST support, if possible config B44_PCI_AUTOSELECT bool depends on B44 && SSB_PCIHOST_POSSIBLE select SSB_PCIHOST default y # Auto-select SSB PCICORE driver, if possible config B44_PCICORE_AUTOSELECT bool depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE select SSB_DRIVER_PCICORE default y config B44_PCI bool depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT default y config BCM4908_ENET tristate "Broadcom BCM4908 internal mac support" depends on ARCH_BCM4908 || COMPILE_TEST default y if ARCH_BCM4908 help This driver supports Ethernet controller integrated into Broadcom BCM4908 family SoCs. config BCM63XX_ENET tristate "Broadcom 63xx internal mac support" depends on BCM63XX select MII select PHYLIB help This driver supports the ethernet MACs in the Broadcom 63xx MIPS chipset family (BCM63XX). config BCMGENET tristate "Broadcom GENET internal MAC support" depends on HAS_IOMEM depends on PTP_1588_CLOCK_OPTIONAL || !ARCH_BCM2835 select MII select PHYLIB select FIXED_PHY select BCM7XXX_PHY select MDIO_BCM_UNIMAC select DIMLIB select BROADCOM_PHY if ARCH_BCM2835 help This driver supports the built-in Ethernet MACs found in the Broadcom BCM7xxx Set Top Box family chipset. config BNX2 tristate "QLogic bnx2 support" depends on PCI select CRC32 select FW_LOADER help This driver supports QLogic bnx2 gigabit Ethernet cards. To compile this driver as a module, choose M here: the module will be called bnx2. This is recommended. config CNIC tristate "QLogic CNIC support" depends on PCI && (IPV6 || IPV6=n) depends on MMU select BNX2 select UIO help This driver supports offload features of QLogic bnx2 gigabit Ethernet cards. To compile this driver as a module, choose M here: the module will be called cnic. This is recommended. config SB1250_MAC tristate "SB1250 Gigabit Ethernet support" depends on SIBYTE_SB1xxx_SOC select PHYLIB help This driver supports Gigabit Ethernet interfaces based on the Broadcom SiByte family of System-On-a-Chip parts. They include the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 and BCM1480 chips. To compile this driver as a module, choose M here: the module will be called sb1250-mac. config TIGON3 tristate "Broadcom Tigon3 support" depends on PCI depends on PTP_1588_CLOCK_OPTIONAL select PHYLIB help This driver supports Broadcom Tigon3 based gigabit Ethernet cards. To compile this driver as a module, choose M here: the module will be called tg3. This is recommended. config TIGON3_HWMON bool "Broadcom Tigon3 HWMON support" default y depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) help Say Y if you want to expose the thermal sensor on Tigon3 devices. config BNX2X tristate "Broadcom NetXtremeII 10Gb support" depends on PCI depends on PTP_1588_CLOCK_OPTIONAL select FW_LOADER select ZLIB_INFLATE select LIBCRC32C select MDIO help This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. To compile this driver as a module, choose M here: the module will be called bnx2x. This is recommended. config BNX2X_SRIOV bool "Broadcom 578xx and 57712 SR-IOV support" depends on BNX2X && PCI_IOV default y help This configuration parameter enables Single Root Input Output Virtualization support in the 578xx and 57712 products. This allows for virtual function acceleration in virtual environments. config BGMAC tristate help This enables the integrated ethernet controller support for many Broadcom (mostly iProc) SoCs. An appropriate bus interface driver needs to be enabled to select this. config BGMAC_BCMA tristate "Broadcom iProc GBit BCMA support" depends on BCMA && BCMA_HOST_SOC depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST select BGMAC select PHYLIB select FIXED_PHY help This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. They can be found on BCM47xx SoCs and provide gigabit ethernet. In case of using this driver on BCM4706 it's also requires to enable BCMA_DRIVER_GMAC_CMN to make it work. config BGMAC_PLATFORM tristate "Broadcom iProc GBit platform support" depends on ARCH_BCM_IPROC || COMPILE_TEST select BGMAC select PHYLIB select FIXED_PHY default ARCH_BCM_IPROC help Say Y here if you want to use the Broadcom iProc Gigabit Ethernet controller through the generic platform interface config SYSTEMPORT tristate "Broadcom SYSTEMPORT internal MAC support" depends on HAS_IOMEM depends on NET_DSA || !NET_DSA select MII select PHYLIB select FIXED_PHY select DIMLIB help This driver supports the built-in Ethernet MACs found in the Broadcom BCM7xxx Set Top Box family chipset using an internal Ethernet switch. config BNXT tristate "Broadcom NetXtreme-C/E support" depends on PCI depends on PTP_1588_CLOCK_OPTIONAL select FW_LOADER select LIBCRC32C select NET_DEVLINK select PAGE_POOL select DIMLIB help This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit Ethernet cards. To compile this driver as a module, choose M here: the module will be called bnxt_en. This is recommended. config BNXT_SRIOV bool "Broadcom NetXtreme-C/E SR-IOV support" depends on BNXT && PCI_IOV default y help This configuration parameter enables Single Root Input Output Virtualization support in the NetXtreme-C/E products. This allows for virtual function acceleration in virtual environments. config BNXT_FLOWER_OFFLOAD bool "TC Flower offload support for NetXtreme-C/E" depends on BNXT default y help This configuration parameter enables TC Flower packet classifier offload for eswitch. This option enables SR-IOV switchdev eswitch offload. config BNXT_DCB bool "Data Center Bridging (DCB) Support" default n depends on BNXT && DCB help Say Y here if you want to use Data Center Bridging (DCB) in the driver. If unsure, say N. config BNXT_HWMON bool "Broadcom NetXtreme-C/E HWMON support" default y depends on BNXT && HWMON && !(BNXT=y && HWMON=m) help Say Y if you want to expose the thermal sensor data on NetXtreme-C/E devices, via the hwmon sysfs interface. endif # NET_VENDOR_BROADCOM