// SPDX-License-Identifier: GPL-2.0-or-later /* * HiSilicon INNO USB2 PHY Driver. * * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. */ #include #include #include #include #include #include #include #define INNO_PHY_PORT_NUM 2 #define REF_CLK_STABLE_TIME 100 /* unit:us */ #define UTMI_CLK_STABLE_TIME 200 /* unit:us */ #define TEST_CLK_STABLE_TIME 2 /* unit:ms */ #define PHY_CLK_STABLE_TIME 2 /* unit:ms */ #define UTMI_RST_COMPLETE_TIME 2 /* unit:ms */ #define POR_RST_COMPLETE_TIME 300 /* unit:us */ #define PHY_TEST_DATA GENMASK(7, 0) #define PHY_TEST_ADDR GENMASK(15, 8) #define PHY_TEST_PORT GENMASK(18, 16) #define PHY_TEST_WREN BIT(21) #define PHY_TEST_CLK BIT(22) /* rising edge active */ #define PHY_TEST_RST BIT(23) /* low active */ #define PHY_CLK_ENABLE BIT(2) struct hisi_inno_phy_port { struct reset_control *utmi_rst; struct hisi_inno_phy_priv *priv; }; struct hisi_inno_phy_priv { void __iomem *mmio; struct clk *ref_clk; struct reset_control *por_rst; struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM]; }; static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv, u8 port, u32 addr, u32 data) { void __iomem *reg = priv->mmio; u32 val; val = (data & PHY_TEST_DATA) | ((addr << 8) & PHY_TEST_ADDR) | ((port << 16) & PHY_TEST_PORT) | PHY_TEST_WREN | PHY_TEST_RST; writel(val, reg); val |= PHY_TEST_CLK; writel(val, reg); val &= ~PHY_TEST_CLK; writel(val, reg); } static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv) { /* The phy clk is controlled by the port0 register 0x06. */ hisi_inno_phy_write_reg(priv, 0, 0x06, PHY_CLK_ENABLE); msleep(PHY_CLK_STABLE_TIME); } static int hisi_inno_phy_init(struct phy *phy) { struct hisi_inno_phy_port *port = phy_get_drvdata(phy); struct hisi_inno_phy_priv *priv = port->priv; int ret; ret = clk_prepare_enable(priv->ref_clk); if (ret) return ret; udelay(REF_CLK_STABLE_TIME); reset_control_deassert(priv->por_rst); udelay(POR_RST_COMPLETE_TIME); /* Set up phy registers */ hisi_inno_phy_setup(priv); reset_control_deassert(port->utmi_rst); udelay(UTMI_RST_COMPLETE_TIME); return 0; } static int hisi_inno_phy_exit(struct phy *phy) { struct hisi_inno_phy_port *port = phy_get_drvdata(phy); struct hisi_inno_phy_priv *priv = port->priv; reset_control_assert(port->utmi_rst); reset_control_assert(priv->por_rst); clk_disable_unprepare(priv->ref_clk); return 0; } static const struct phy_ops hisi_inno_phy_ops = { .init = hisi_inno_phy_init, .exit = hisi_inno_phy_exit, .owner = THIS_MODULE, }; static int hisi_inno_phy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; struct hisi_inno_phy_priv *priv; struct phy_provider *provider; struct device_node *child; int i = 0; int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->mmio = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(priv->mmio)) { ret = PTR_ERR(priv->mmio); return ret; } priv->ref_clk = devm_clk_get(dev, NULL); if (IS_ERR(priv->ref_clk)) return PTR_ERR(priv->ref_clk); priv->por_rst = devm_reset_control_get_exclusive(dev, NULL); if (IS_ERR(priv->por_rst)) return PTR_ERR(priv->por_rst); for_each_child_of_node(np, child) { struct reset_control *rst; struct phy *phy; rst = of_reset_control_get_exclusive(child, NULL); if (IS_ERR(rst)) return PTR_ERR(rst); priv->ports[i].utmi_rst = rst; priv->ports[i].priv = priv; phy = devm_phy_create(dev, child, &hisi_inno_phy_ops); if (IS_ERR(phy)) return PTR_ERR(phy); phy_set_bus_width(phy, 8); phy_set_drvdata(phy, &priv->ports[i]); i++; if (i >= INNO_PHY_PORT_NUM) { dev_warn(dev, "Support %d ports in maximum\n", i); break; } } provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); return PTR_ERR_OR_ZERO(provider); } static const struct of_device_id hisi_inno_phy_of_match[] = { { .compatible = "hisilicon,inno-usb2-phy", }, { .compatible = "hisilicon,hi3798cv200-usb2-phy", }, { }, }; MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match); static struct platform_driver hisi_inno_phy_driver = { .probe = hisi_inno_phy_probe, .driver = { .name = "hisi-inno-phy", .of_match_table = hisi_inno_phy_of_match, } }; module_platform_driver(hisi_inno_phy_driver); MODULE_DESCRIPTION("HiSilicon INNO USB2 PHY Driver"); MODULE_LICENSE("GPL v2");