--- /dev/null +++ b/arch/arm/dts/mt7986a-glinet-gl-mt6000.dts @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +#include +#include + +#include "mt7986.dtsi" + +/ { + model = "GL.iNet GL-MT6000"; + compatible = "glinet,gl-mt6000", "mediatek,mt7986-emmc-rfb", "mediatek,mt7986"; + + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "reset"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_blue: green { + label = "blue:status"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + }; + + led_status_white: blue { + label = "white:status"; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + +}; + +&uart0 { + mediatek,force-highspeed; + status = "okay"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "2500base-x"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <2500>; + full-duplex; + }; +}; + +&pinctrl { + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_51"; + }; + + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + conf-clk { + pins = "EMMC_CK"; + drive-strength = ; + bias-pull-down = ; + }; + + conf-dsl { + pins = "EMMC_DSL"; + bias-pull-down = ; + }; + + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = ; + bias-pull-up = ; + }; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; + status = "okay"; +}; + +&wmcpu_emi { + status = "disabled"; +}; --- /dev/null +++ b/configs/mt7986a_glinet_gl-mt6000_defconfig @@ -0,0 +1,105 @@ +CONFIG_ARM=y +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x80000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-glinet-gl-mt6000" +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_TARGET_MT7986=y +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_FIT=y +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_MENU_SHOW=y +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-glinet-gl-mt6000.dtb" +CONFIG_LOGLEVEL=7 +CONFIG_PRE_CONSOLE_BUFFER=y +CONFIG_LOG=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_CPU=y +CONFIG_CMD_LICENSE=y +CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_ERASEENV=y +CONFIG_CMD_ENV_FLAGS=y +CONFIG_CMD_STRINGS=y +CONFIG_CMD_DM=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_PWM=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_TFTPSRV=y +CONFIG_CMD_RARP=y +CONFIG_CMD_PING=y +CONFIG_CMD_CDP=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_DNS=y +CONFIG_CMD_LINK_LOCAL=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_PSTORE=y +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 +CONFIG_CMD_UUID=y +CONFIG_CMD_HASH=y +CONFIG_CMD_SMC=y +CONFIG_OF_EMBED=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_DEFAULT_ENV_FILE=y +CONFIG_DEFAULT_ENV_FILE="glinet_gl-mt6000_env" +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_VERSION_VARIABLE=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.1" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.254" +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_BUTTON=y +CONFIG_BUTTON_GPIO=y +CONFIG_CLK=y +CONFIG_GPIO_HOG=y +CONFIG_LED=y +CONFIG_LED_BLINK=y +CONFIG_LED_GPIO=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_PHY_FIXED=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PHY=y +CONFIG_PHY_MTK_TPHY=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_PWM=y +CONFIG_PWM_MTK=y +CONFIG_RAM=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MTK=y +CONFIG_USB_STORAGE=y +CONFIG_HEXDUMP=y +CONFIG_LMB_MAX_REGIONS=64 --- /dev/null +++ b/glinet_gl-mt6000_env @@ -0,0 +1,25 @@ +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x46000000 +bootdelay=3 +bootfile_bl2=openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin +bootfile_fip=openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip +bootfile_firmware=openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 +bootmenu_title= *** U-Boot Boot Menu for GL-iNet GL-MT6000 *** +bootmenu_0=Startup system (Default).=run boot_system +bootmenu_1=Load Firmware via TFTP then write to eMMC.=run boot_tftp_firmware ; run bootmenu_confirm_return +bootmenu_2=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return +bootmenu_3=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return +bootmenu_4=Reboot.=reset +bootmenu_5=Reset all settings to factory defaults.=run reset_factory ; reset +filesize_to_blk=setexpr cnt $filesize + 0x1ff && setexpr cnt $cnt / 0x200 +mmc_read_kernel=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr $part_addr $image_size +boot_system=part start mmc 0 kernel part_addr && part size mmc 0 kernel part_size && run mmc_read_kernel && bootm +boot_tftp_firmware=tftpboot $loadaddr $bootfile_firmware && run emmc_write_firmware +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2 +emmc_write_firmware=part start mmc 0 kernel part_addr && run filesize_to_blk && mmc write $loadaddr $part_addr $cnt +emmc_write_bl2=run filesize_to_blk && test 0x$cnt -le 0x800 && mmc partconf 0 1 1 1 && && mmc write $loadaddr 0x0 0x800 ; mmc partconf 0 1 1 0 +emmc_write_fip=part start mmc 0 fip part_addr && part size mmc 0 fip part_size && run filesize_to_blk && test 0x$cnt -le 0x$part_size && mmc write $loadaddr $part_addr $cnt +reset_factory=eraseenv && reset