From b641ca5f4d272b83ef77ebcf5c75678cf139c69a Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sat, 17 Apr 2021 13:33:54 -0500 Subject: [PATCH 25/90] sunxi: binman: Enable SPL FIT loading for 32-bit SoCs Now that Crust (SCP firmware) has support for H3, we need a FIT image to load it. H3 also needs to load a SoC-specific eGon blob to support CPU 0 hotplug. Let's first enable FIT support before adding extra firmware. Update the binman description to work on either 32-bit or 64-bit SoCs: - Make BL31 optional, since it is not used on 32-bit SoCs (though BL32 may be used in the future). - Explicitly set the minimum offset of the FIT to 32 KiB, since SPL on some boards is still only 24 KiB large even with FIT support enabled. CONFIG_SPL_PAD_TO cannot be used because it is not defined for H616. FIT unlocks more features (signatures, multiple DTBs, etc.), so enable it by default. A10 (sun4i) only has 24 KiB of SRAM A1, so it needs SPL_FIT_IMAGE_TINY. For simplicity, enable that option everywhere. Cover-letter: sunxi: SPL FIT support for 32-bit sunxi SoCs This series makes the necessary changes so 32-bit sunxi SoCs can load additional device trees or firmware from SPL along with U-Boot proper. There was no existing binman entry property that put the FIT at the right offset. The minimum offset is 32k, but this matches neither the SPL size (which is no more than 24k on some SoCs) nor the FIT alignment (which is 512 bytes in practice due to SPL size constraints). So instead of adding a new property, I fixed what is arguably a bug in the offset property -- though this strategy will not work if someone is intentionally creating overlapping entries. END Series-to: sunxi Series-to: sjg Signed-off-by: Samuel Holland --- arch/arm/Kconfig | 1 + arch/arm/dts/sunxi-u-boot.dtsi | 46 ++++++++++++++++++++++------------ common/spl/Kconfig | 9 +++---- 3 files changed, 35 insertions(+), 21 deletions(-) --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1135,6 +1135,7 @@ config ARCH_SUNXI imply SPL_GPIO imply SPL_LIBCOMMON_SUPPORT imply SPL_LIBGENERIC_SUPPORT + imply SPL_LOAD_FIT imply SPL_MMC if MMC imply SPL_POWER imply SPL_SERIAL --- a/arch/arm/dts/sunxi-u-boot.dtsi +++ b/arch/arm/dts/sunxi-u-boot.dtsi @@ -1,13 +1,19 @@ #include -#ifdef CONFIG_MACH_SUN50I_H6 -#define BL31_ADDR 0x104000 -#define SCP_ADDR 0x114000 -#elif defined(CONFIG_MACH_SUN50I_H616) -#define BL31_ADDR 0x40000000 +#ifdef CONFIG_ARM64 +#define ARCH "arm64" #else -#define BL31_ADDR 0x44000 -#define SCP_ADDR 0x50000 +#define ARCH "arm" +#endif + +#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H5) +#define BL31_ADDR 0x00044000 +#define SCP_ADDR 0x00050000 +#elif defined(CONFIG_MACH_SUN50I_H6) +#define BL31_ADDR 0x00104000 +#define SCP_ADDR 0x00114000 +#elif defined(CONFIG_MACH_SUN50I_H616) +#define BL31_ADDR 0x40000000 #endif / { @@ -34,30 +40,33 @@ filename = "spl/sunxi-spl.bin"; }; -#ifdef CONFIG_ARM64 +#ifdef CONFIG_SPL_LOAD_FIT fit { - description = "Configuration to load ATF before U-Boot"; + description = "Configuration to load U-Boot and firmware"; + offset = <32768>; #address-cells = <1>; fit,fdt-list = "of-list"; images { uboot { - description = "U-Boot (64-bit)"; + description = "U-Boot"; type = "standalone"; os = "u-boot"; - arch = "arm64"; + arch = ARCH; compression = "none"; load = ; + entry = ; u-boot-nodtb { }; }; +#ifdef BL31_ADDR atf { description = "ARM Trusted Firmware"; type = "firmware"; os = "arm-trusted-firmware"; - arch = "arm64"; + arch = ARCH; compression = "none"; load = ; entry = ; @@ -67,6 +76,7 @@ missing-msg = "atf-bl31-sunxi"; }; }; +#endif #ifdef SCP_ADDR scp { @@ -95,19 +105,23 @@ @config-SEQ { description = "NAME"; +#ifdef BL31_ADDR firmware = "atf"; -#ifndef SCP_ADDR - loadables = "uboot"; #else - loadables = "scp", "uboot"; + firmware = "uboot"; +#endif + loadables = +#ifdef SCP_ADDR + "scp", #endif + "uboot"; fdt = "fdt-SEQ"; }; }; }; #else u-boot-img { - offset = ; + offset = <32768>; }; #endif }; --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -76,12 +76,12 @@ config SPL_SIZE_LIMIT_PROVIDE_STACK config SPL_MAX_SIZE hex "Maximum size of the SPL image, excluding BSS" + default 0x37fa0 if MACH_SUN50I_H616 default 0x30000 if ARCH_MX6 && MX6_OCRAM_256KB + default 0x25fa0 if MACH_SUN50I_H6 default 0x1b000 if AM33XX && !TI_SECURE_DEVICE default 0x10000 if ARCH_MX6 && !MX6_OCRAM_256KB default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x10000 - default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x20000 && !MACH_SUN50I_H616 - default 0xbfa0 if MACH_SUN50I_H616 default 0x7000 if RCAR_GEN3 default 0x5fa0 if SUNXI_SRAM_ADDRESS = 0x0 default 0x10000 if ASPEED_AST2600 @@ -97,7 +97,7 @@ config SPL_PAD_TO default 0x31000 if ARCH_MX6 && MX6_OCRAM_256KB default 0x11000 if ARCH_MX7 || (ARCH_MX6 && !MX6_OCRAM_256KB) default 0x10000 if ARCH_KEYSTONE - default 0x8000 if ARCH_SUNXI && !MACH_SUN50I_H616 + default 0x0 if ARCH_SUNXI default 0x0 if ARCH_MTMIPS default TPL_MAX_SIZE if TPL_MAX_SIZE > SPL_MAX_SIZE default SPL_MAX_SIZE @@ -575,8 +575,7 @@ config SPL_MD5 config SPL_FIT_IMAGE_TINY bool "Remove functionality from SPL FIT loading to reduce size" depends on SPL_FIT - default y if MACH_SUN50I || MACH_SUN50I_H5 || SUN50I_GEN_H6 - default y if ARCH_IMX8M || ARCH_IMX9 + default y if ARCH_IMX8M || ARCH_IMX9 || ARCH_SUNXI help Enable this to reduce the size of the FIT image loading code in SPL, if space for the SPL binary is very tight.