From a39b1bd1ad0babb355a5cb6f6a3bd8e378433b54 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Fri, 27 Aug 2021 21:43:19 -0500 Subject: [PATCH 48/90] gpio: axp: Bind via device tree Now that the PMIC has a DM driver and binds device tree subnodes, the GPIO device can be bound that way, instead of from inside board code. Since the driver still uses the single set of register definitions from axpXXX.h (as selected by AXPxxx_POWER), it does not differentiate among the supported compatibles. Signed-off-by: Samuel Holland --- arch/arm/include/asm/arch-sunxi/gpio.h | 6 ----- arch/arm/mach-sunxi/Kconfig | 6 ----- board/sunxi/board.c | 4 --- drivers/gpio/Kconfig | 8 ++++++ drivers/gpio/axp_gpio.c | 34 +++++++++++--------------- 5 files changed, 22 insertions(+), 36 deletions(-) --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -219,10 +219,4 @@ void sunxi_gpio_set_pull(u32 pin, u32 va void sunxi_gpio_set_pull_bank(struct sunxi_gpio *pio, int bank_offset, u32 val); int sunxi_name_to_gpio(const char *name); -#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO -int axp_gpio_init(void); -#else -static inline int axp_gpio_init(void) { return 0; } -#endif - #endif /* _SUNXI_GPIO_H */ --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -682,12 +682,6 @@ config R_I2C_ENABLE Set this to y to enable the I2C controller which is part of the PRCM. endif -config AXP_GPIO - bool "Enable support for gpio-s on axp PMICs" - depends on AXP_PMIC_BUS - ---help--- - Say Y here to enable support for the gpio pins of the axp PMIC ICs. - config AXP_DISABLE_BOOT_ON_POWERON bool "Disable device boot on power plug-in" depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -221,10 +221,6 @@ int board_init(void) } #endif /* !CONFIG_ARM64 && !CONFIG_MACH_SUNIV */ - ret = axp_gpio_init(); - if (ret) - return ret; - /* strcmp() would look better, but doesn't get optimised away. */ if (CONFIG_SATAPWR[0]) { satapwr_pin = sunxi_name_to_gpio(CONFIG_SATAPWR); --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -104,6 +104,14 @@ config ALTERA_PIO Select this to enable PIO for Altera devices. Please find details on the "Embedded Peripherals IP User Guide" of Altera. +config AXP_GPIO + bool "X-Powers AXP PMICs GPIO driver" + depends on DM_GPIO && PMIC_AXP + depends on AXP_PMIC_BUS + help + This driver supports the GPIO pins on + X-Powers AXP152, AXP2xx, and AXP8xx PMICs. + config BCM2835_GPIO bool "BCM2835 GPIO driver" depends on DM_GPIO --- a/drivers/gpio/axp_gpio.c +++ b/drivers/gpio/axp_gpio.c @@ -10,9 +10,6 @@ #include #include #include -#include -#include -#include #include #define AXP_GPIO_PREFIX "AXP0-" @@ -99,6 +96,11 @@ static const struct dm_gpio_ops axp_gpio static int axp_gpio_probe(struct udevice *dev) { struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); + int ret; + + ret = pmic_bus_init(); + if (ret) + return ret; /* Tell the uclass how many GPIOs we have */ uc_priv->bank_name = AXP_GPIO_PREFIX; @@ -107,26 +109,18 @@ static int axp_gpio_probe(struct udevice return 0; } +static const struct udevice_id axp_gpio_ids[] = { + { .compatible = "x-powers,axp152-gpio" }, + { .compatible = "x-powers,axp209-gpio" }, + { .compatible = "x-powers,axp221-gpio" }, + { .compatible = "x-powers,axp813-gpio" }, + { } +}; + U_BOOT_DRIVER(axp_gpio) = { .name = "axp_gpio", .id = UCLASS_GPIO, + .of_match = axp_gpio_ids, .probe = axp_gpio_probe, .ops = &axp_gpio_ops, }; - -int axp_gpio_init(void) -{ - struct udevice *dev; - int ret; - - ret = pmic_bus_init(); - if (ret) - return ret; - - /* There is no devicetree support for the axp yet, so bind directly */ - ret = device_bind_driver(dm_root(), "axp_gpio", "AXP-gpio", &dev); - if (ret) - return ret; - - return 0; -}