// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "ar7100.dtsi" #include #include #include / { compatible = "aruba,ap-105", "qca,ar7161"; model = "Aruba AP-105"; chosen { bootargs = "console=ttyS0,9600"; }; aliases { led-boot = &led_power_green; led-failsafe = &led_power_red; led-running = &led_power_green; led-upgrade = &led_power_green; label-mac-device = ð0; }; leds { compatible = "gpio-leds"; led_power_green: power_green { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; led_power_red: power_red { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; panic-indicator; }; wifi_2g_red { label = "red:wlan2g"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; }; wifi_5g_red { label = "red:wlan5g"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; }; ath9k-leds { compatible = "gpio-leds"; wifi_2g_green { label = "green:wlan2g"; gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wifi_5g_green { label = "green:wlan5g"; gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 6 GPIO_ACTIVE_LOW>; }; }; i2c { compatible = "i2c-gpio"; sda-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; scl-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; #address-cells = <1>; #size-cells = <0>; tpm@29 { compatible = "atmel,at97sc3203s"; reg = <0x29>; /* triggering it, will also kill system */ reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; }; }; }; &pcie0 { status = "okay"; ath9k0: wifi@11,0 { /* 2.4 GHz */ compatible = "pci168c,0029"; nvmem-cells = <&macaddr_hwinfo_1c 1>; nvmem-cell-names = "mac-address"; reg = <0x8800 0 0 0 0>; #gpio-cells = <2>; gpio-controller; }; ath9k1: wifi@12,0 { /* 5 GHz */ compatible = "pci168c,0029"; nvmem-cells = <&macaddr_hwinfo_1c 2>; nvmem-cell-names = "mac-address"; reg = <0x9000 0 0 0 0>; #gpio-cells = <2>; gpio-controller; }; }; &mdio0 { status = "okay"; phy0: ethernet-phy@0 { reg = <0>; }; }; ð0 { status = "okay"; nvmem-cells = <&macaddr_hwinfo_1c 0>; nvmem-cell-names = "mac-address"; pll-data = <0x00110000 0x00001099 0x00991099>; phy-mode = "rgmii"; phy-handle = <&phy0>; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x40000>; read-only; }; partition@40000 { label = "firmware"; reg = <0x40000 0xfa0000>; compatible = "denx,uimage"; }; hwinfo: partition@fe0000 { reg = <0xfe0000 0x10000>; label = "hwinfo"; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_hwinfo_1c: mac-address@1c { compatible = "mac-base"; reg = <0x1c 0x6>; #nvmem-cell-cells = <1>; }; }; }; partition@ff0000 { label = "u-boot-env"; reg = <0xff0000 0x10000>; read-only; }; }; }; };