// SPDX-License-Identifier: GPL-2.0-only #include "ar9132.dtsi" #include #include #include / { compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132"; model = "TP-Link TL-WR1043ND v1"; aliases { led-boot = &led_system; led-failsafe = &led_system; led-running = &led_system; led-upgrade = &led_system; label-mac-device = ð0; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; qss { label = "qss"; linux,code = ; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; usb { function = LED_FUNCTION_USB; color = ; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; trigger-sources = <&hub_port>; linux,default-trigger = "usbport"; }; led_system: system { label = "green:system"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; qss { label = "green:qss"; gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; }; wlan { function = LED_FUNCTION_WLAN; color = ; gpios = <&gpio 9 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; }; rtl8366rb { compatible = "realtek,rtl8366rb"; gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>; gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>; resets = <&rst 8>; reset-names = "switch"; }; }; &usb { status = "okay"; }; &usb_phy { status = "okay"; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; uboot: partition@0 { label = "u-boot"; reg = <0x000000 0x020000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_uboot_1fc00: macaddr@1fc00 { reg = <0x1fc00 0x6>; }; }; }; partition@20000 { compatible = "tplink,firmware"; label = "firmware"; reg = <0x020000 0x7D0000>; }; art: partition@7F0000 { label = "art"; reg = <0x7F0000 0x010000>; read-only; }; }; }; }; ð0 { status = "okay"; phy-mode = "rgmii"; nvmem-cells = <&macaddr_uboot_1fc00>; nvmem-cell-names = "mac-address"; fixed-link { speed = <1000>; full-duplex; }; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; nvmem-cells = <&macaddr_uboot_1fc00>; nvmem-cell-names = "mac-address"; };