// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca953x.dtsi" #include #include #include #include / { model = "Letv LBA-047-CH"; compatible = "letv,lba-047-ch", "qca,qca9531"; aliases { label-mac-device = ð0; led-boot = &led_status_red; led-failsafe = &led_status_blue; led-running = &led_status_green; led-upgrade = &led_status_blue; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; led_status_blue: led-0 { color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; led_status_green: led-1 { color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; led_status_red: led-2 { color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; }; virtual_flash { compatible = "mtd-concat"; devices = <&fwconcat0 &fwconcat1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { reg = <0x0 0x0>; label = "firmware"; compatible = "openwrt,uimage", "denx,uimage"; openwrt,ih-magic = ; }; }; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x40000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x40000 0x10000>; read-only; }; fwconcat0: partition@50000 { label = "fwconcat0"; reg = <0x50000 0xe30000>; }; partition@e80000 { label = "loader"; reg = <0xe80000 0x10000>; }; fwconcat1: partition@e90000 { label = "fwconcat1"; reg = <0xe90000 0x160000>; }; partition@ff0000 { label = "art"; reg = <0xff0000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_art_0: macaddr@0 { reg = <0x0 0x6>; }; macaddr_art_6: macaddr@6 { reg = <0x6 0x6>; }; cal_art_1000: calibration@1000 { reg = <0x1000 0x440>; }; }; }; }; }; }; ð0 { status = "okay"; phy-handle = <&swphy4>; nvmem-cells = <&macaddr_art_0>; nvmem-cell-names = "mac-address"; }; ð1 { compatible = "qca,qca9530-eth", "syscon", "simple-mfd"; nvmem-cells = <&macaddr_art_6>; nvmem-cell-names = "mac-address"; }; &wmac { status = "okay"; nvmem-cells = <&cal_art_1000>; nvmem-cell-names = "calibration"; };